79 jobs found

This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes including but not limited to: Machining and Mechanical Assembly Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates who already hold SC Clearance Good working knowledge of complex assemblies and New product introduction experience. Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Facility layout experience would be a advantage. Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a drive for continuous improvement.

This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes. Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates with current SC Clearance. Detailed Assembly Processing knowledge (Electro Mechanical, Bonding, etc). Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement. Composite processing knowledge would be beneficial.

Mechanical Building Services Design Engineer Llantrisant 27960/610 40,000 - 45,000 plus healthcare, pension and more. Benefits Package: A starting salary of between 40,000 - 45,000 Company pension scheme Healthcare plan 25 days holidays plus bank holidays This highly successful Mechanical & Electrical Building Services contractor has built a fantastic reputation for the quality, delivery and reliability of their Design and installation services. Extremely highly regarded in their industry, they are experts at delivering complete design services for a diverse client base throughout the UK, across commercial, industrial, government and healthcare sectors. They are growing their Mechanical department and are looking to recruit another two career focused Design Engineers to further support this growth. The role may suit a Mechanical Engineer from a Consultancy, looking to expand thier career within a faster paced environment. Alternatively you may be working for a Contractor and looking for an opportunity which provides a huge amount of autonomy and a chance to help drive the growth of a relatively new Mechanical department. Role & Responsibilities: Develop / implement mechanical building services design solutions, working on several projects simultaneously - commercial, healthcare, industrial. Conduct detailed analyses and calculations. Support the preparation and review of Mechanical design drawings. Liaise with BIM co-ordinators and leading activity in order to ensure that the design packages are produced to the required timescales and standards of quality. Provide support to the Project Managers during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Knowledge, Skills & Experience: Degree Qualified in Mechanical Engineering Demonstratable experience in detailed Building Services Design engineering, including Mechanical calculations on plant equipment, sizing pipework, schematics etc. Proven track record as an Engineer in both a design office and in construction. For further information please email (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Shillito Group are delighted to be supporting our international manufacturing client in the recruitment of a Design Engineer. The Role: As a Design Engineer, you will: Take projects through from concept to manufacture and into the market. Be responsible for driving through to completion. Support other projects and the ECR process to update and develop existing Products to maintain suitability for production, sales and approvals. Ensure technical documentation (specifications, drawings, work instructions etc.) are current and up to date. Assist the team and provide engineering support across the organisation including production, product management, quality, sales and marketing and customer service. Support the organisations continuous improvement and value engineering activities on existing products and processes, identifying areas for improvement and updating documentation. Other duties as required by the business. KPIs: Project delivery against plans. Quality of drawings and technical documentation. Key objectives: To ensure: Products meet customer and market requirements. Engineering support is provided successfully across the business. Skills required: Self-motivated. An effective communicator A good team player A creative problem solver with attention to detail. Good time management with the ability to focus on task completion. Experience with 3D modelling software (Solid works or similar). Experience of conceptualising as a form of communication. An understanding of mechanical principles. Good technical writing skills. Experience: Degree Level Design Engineering from a Product Development, R&D background with relevant experience. Worked in Design departments with multidisciplinary teams and across a variety of projects, technologies and manufacturing methods. Knowledge of pneumatics systems and products would be advantageous but not essential. Please apply for immediate consideration. Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief.

Mechanical Design Engineer - Special Projects (DV) Bedfordshire Permanent Full?time (37.5 hrs/week) 4 day working week (Mon-Thurs) with flexible hours Developed Vetting (DV) required The Opportunity An exciting opportunity has arisen for an experienced Mechanical Design Engineer to join a Special Projects engineering team delivering mission critical solutions within the UK defence sector. This role sits at the forefront of highly classified programmes and offers the chance to work on technically challenging designs, from concept through to prototype, test and delivery , in a secure, collaborative environment. If you thrive on complex engineering problems, enjoy working with cutting-edge technology, and are comfortable operating at a high security classification, this role offers genuine technical depth and long?term career development. What You'll Be Working On As a Mechanical Design Engineer, you will be responsible for the full engineering lifecycle, including: Developing innovative, robust mechanical design solutions from requirements and design briefs Producing concept and detailed designs using CREO Parametric CAD Creating supporting calculations and analysis to justify design decisions Designing high-integrity components, complex mechanisms and linkages Defining and specifying electrical interfaces for mechanical sub-systems Collaborating closely with Subject Matter Experts and Design Authorities Supporting drawing production and configuration control using Windchill PDM Preparing and presenting design review packs to senior stakeholders Supporting prototype manufacture, assembly and supplier engagement Leading and participating in physical testing and design proving Ensuring compliance with relevant standards, safety requirements and legislation What We're Looking For Essential: Ability to work in the UK without restriction DV clearance held or willingness to enter DV vetting immediately Sole UK nationality (due to the nature of the work) Proven experience in mechanical sub-system and component design Strong experience with CREO CAD and Windchill PDM Knowledge of complex mechanism design principles Ability to perform basic structural and kinematic calculations Excellent attention to detail and high-quality technical documentation skills Experience delivering designs for harsh or demanding environments Highly desirable: Background in Defence, Aerospace or Space sectors Experience specifying materials, treatments and finishes for high-performance products Experience designing mechanical systems with integrated electrical interfaces Security & Working Arrangements BPSS required to start; DV required for the role (support provided through the process if not already held) 100% onsite working due to security requirements Long-term, secure programmes with strong investment in engineering capability What's On Offer Competitive salary Annual bonus scheme Comprehensive benefits package 4-day working week supporting excellent work/life balance The opportunity to work on high-impact, highly classified defence projects Interested? If you're a Mechanical Design Engineer with strong defence, aerospace or space experience - and the ability to operate at DV level - we'd like to hear from you. Apply directly or message for a confidential discussion

We are currently recruiting for a Lead Structural Engineer to join a leading global defence organisation at their Ampthill site. This is an exciting opportunity to work within a highly dynamic engineering environment supporting cutting-edge programmes across platform integration, air defence, and advanced weapons systems. This role sits within the Structural Integrity Group and will see you operating as a technical specialist, delivering high-quality structural analysis across a wide range of complex systems. The Role As a Structural Integrity Engineer, you will: Develop and validate high-fidelity finite element models across metallic and composite structures Perform static, dynamic, thermal, vibration, and fatigue analyses Conduct damage tolerance and durability assessments Produce clear strength summaries, reports, and risk assessments aligned to MoD standards Translate analysis outputs into manufacturing and inspection requirements Support design reviews, client engagements, and technical audits Drive continuous improvement through tools, automation, and modelling processes Key Requirements Degree-qualified (BEng or equivalent) in Mechanical or Aerospace Engineering Strong background in structural analysis (5+ years in industry) Proven experience with MSC Nastran and associated pre/post-processing tools (Patran, Simcenter, ANSA, etc.) Solid understanding of linear and non-linear analysis methods Experience with fatigue, stress analysis, and hand calculations Knowledge of metallic materials (aluminium, titanium, steel) and exposure to composites Scripting experience (Python or similar) and familiarity with HPC environments is advantageous Strong communication skills and ability to work cross-functionally Additional Information Hybrid working: On-site Mondays and Tuesdays, remote remainder (subject to business needs) Candidates must be eligible to obtain Security Clearance (SC) and be willing to progress to Developed Vetting (DV) Opportunity to work a compressed 4-day week with flexible arrangements Initial start on BPSS, with full-time on-site requirement once DV is achieved This is a fantastic opportunity to contribute to high-profile defence projects while working in a collaborative and forward-thinking engineering team.

Multiple Mechanical role availale across all levels Mechanical Engineer/Supervisor/Package Manager/Construction Manager/Lead/Project Manager On-site Finland, Ireland, Netherlands, Italy, Portugal, Germany & Sweden Description Our client is a dedicated data centre delivery partner providing turnkey solutions to our clients, headquartered in Dublin and delivering throughout Europe. The compamny specialises in providing turnkey data centre solutions, providing services from design, through to construction across the full range of civil, structural, architectural, mechanical and electrical services as well as commissioning. The company has grown to become the leading and most trusted company in our sector and is the only dedicated Data Centre delivery partner in Europe. We are currently constructing multiple turnkey data centre projects in 7 different European countries , equating to over 430 MW of IT load in flight . We are pleased to announce that we have a vacancy for a Mechanical roles to join our on-site teams across Europe Requirements Manage relevant client communications Prepare method statements and risk assessments for construction activities and complete all HVAC deliverables within project and safety criteria Communicate with project team to sequence installation of pipework to meet scheduled dates Assess and manage the project commercially to validate the project on handover from estimating, and proceed through to full technical procurement of all equipment, specialist sub-contractors and suppliers Assist with documenting and costing of changes to the work scopes and preparation of the monthly valuations and final account Management of Project Schedule two weeks look ahead in conjunction with the Project Team Ensure the labour requirements are met and maintained as per project program requirements Ensure that all matters of compliance and governance are identified and adhered to, including: Health & Safety issues on site and ensuring that all Sub Contractors are working in a safe manner. Review ways of working and where possible implement changes to improve safety. Ensure housekeeping is kept to a high standard by all Sub Contactors. Skills/Qualifications: Relevant Mechanical Qualification essential eg. B. Eng Degree, City & Guilds Certificate, HNC/BTEC or NVQ Previous experience in a similar role, within a Mechanical and Electrical contracting environment is desirable Data Centre experience is advantageous Excellent organisational, communication and time management skills. Benefits Working on large scale data centre projects Collaborative team working environments Career progression and development supported Competitive salary packages

Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Do you have experience with SysML or Rhapsody? Do you have hands-on experience with DOORS and DOORS NG? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Systems V&V Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: Test Strategy & Development: Defining test requirements, creating test plans, scoping frontend activities with the customer ensuring that requirements are met and understood System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards Influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects Supporting new product bid activities Identify, document, and deploy best practice across the department and within projects Your skillset may include: Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators) Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody Experience in DfT and testability RF / Microwave systems knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Job Title: Design Engineer- Gas Turbine - Test Rigs Employment Type: Permanent Location: Derby, UK (Onsite) Industry: Aerospace Role Our client is a global leader in innovative energy and aerospace turbomachinery, specializing in the development of next-generation gas turbines. With a strong commitment to engineering excellence and sustainability, they are seeking a skilled Design Engineer who has experience on Gas Turbine Test Rigs to join the client team in Derby for permanent role. Job Description The ideal candidate will be responsible for executing and leading the full design process from concept to production. You will create new turbomachinery designs and update our current designs. During the creation process, you will ensure that our turbomachinery designs meet all the necessary requirements. Senior engineers will be expected to have the technical background and sufficient knowledge to perform most phases of hardware design, development and documentation with limited supervision. Responsibilities As a Design Engineer you will create, update and maintain designs. Manage multiple complex projects at the same time. Ensure our designs meet manufacturing, technical and customer requirements. You will ensure that all design projects are completed within budget and on time. Mentor and support younger engineers in the team and manage low complexity projects. Qualifications & Experience Bachelor's degree or equivalent experience in Aeronautical Engineering, Mechanical Engineering or a relevant technical degree. 6+ years of applicable work experience in turbomachinery design. CAD experience required, NX proficiency advantageous. Strong organisational and communication skills. Ability to make technical presentations internally and to customers. Excellent written and verbal communication skills. Must be able to work with customers to define and document requirements, address technical concerns and provide project status. Work Environment The work environment will include a combination of office and lab/workshop. Travel will be required from time to time throughout the UK and Europe. Employee will be required to perform other duties as requested, directed or assigned. What will you get: - Competitive Salary - Holidays (25 days per year plus Bank hols) - Pension - Private Medical Insurance - Death in Service insurance - Income Protection - Employee Share Purchase Plan - Cycle to Work This vacancy is being advertised by Belcan.

Tooling Design Engineer Ampthill, Bedfordshire Contract (6 months), inside IR35, 37.5h, 4 day working week Monday to Thursday About the Role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to provide technical support to the team in the design, development and implementation of industrial tools, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, performance requirements and ensure legislative compliance is adhered to. A thorough working knowledge of CAD design tools such as CREO and Windchill is required. Design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. The Tooling Design Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Develop manufacturing tooling within any of the following technologies; NC Machining Composite layup Designing any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience A background in tooling design and experience gained from within a manufacturing environment. Broad manufacturing knowledge; industry experience with CNC machining, composites, fabrication, mechanical assembly, additive manufacturing. Ability to design new tooling, developing from initial concepts through to production release. Experience using CAD software (CREO) to generate 3D models and technical drawings. Experience using PDM software (Windchill) to manage document release and change. Ability to produce detailed drawings to BS8888. An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures. Awareness of DFM/A and PFMEA principles and practical application. Capability to derive Technical Requirements for tooling from the product requirements. Knowledge of Lean Manufacturing, Six Sigma Methodology, Quality toolset experience. Experience of preparing manufacturing BOM's and routings and manufacturing process instructions. Key personal competencies: Strong analytical skills. Good communication skills that can influence a range of audiences internally and externally in meetings at all levels. A good team player, able to liaise with other functions across the business. An independent thinker, able to take an assertive stance to enforce the key customer and quality requirements. Experience of driving change in process, behaviour and culture. Key competences: personal accountability, building relationships, planning for results, customer first, adaptability. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Senior Manufacturing Engineer - Process (Metrology) Pitstone Benefits: 8% Bonus, Excellent Pension, 33 Days Holiday, Dental, BUPA, Workplace nursery scheme, Midday finish on Fridays, Enhanced family friendly policies, Wellbeing programme, Employee assistance programme including health and finance, Onsite subsidised canteen At Safran, excellence is a journey - and we'd love you to be a part of it . As a global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future. We are looking for passionate individuals to join our Industrialisation team as a Senior Manufacturer Engineer - Process (Metrology) at our Pitstone site. At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone and are proudly a Disability Confident Employer. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. The Role The Senior Manufacturing Engineer acts as the technical lead for a defined manufacturing domain or process, providing expert support, coaching and escalation for Manufacturing Engineers and Operations teams. The domain specialises in the design, development and implementation of optimal measuring strategies and processes and resolving dimensional issues, optimising the quality and delivery of the production facility. Senior authority for metrology, dimensional control and measurement systems. Define and optimise measuring strategies (CMM, laser tracker, scanning, vision systems). Own capability, accuracy and compliance of measurement systems. Approve inspection plans, MSA, gauge R&R, uncertainty analysis. Lead development and deployment of SPC strategies for measurement processes, including key characteristic monitoring and sampling plans. Resolve complex dimensional variation problems and lead metrology technology introduction Lead CI projects to reduce dimensional defects and measurement cycle time. Senior approver for dimensional deviations and concessions. What You'll Bring: - Bachelor's degree in mechanical, manufacturing, or other related engineering field - Essential - Demonstrable experience in manufacturing engineering, ideally in a regulated industry - Essential - Proficiency in CAD, CAM, and process simulation tools - Essential - Strong knowledge of Lean Manufacturing & Six Sigma methodologies- Essential - Ability to interpret engineering drawings - Essential - Experience deploying APQP standards and tools - Desirable - Experience mentoring or developing engineers - Desirable Here, we craft excellence together. Get involved: We also have a number of groups and forums onsite that you can get involved with, including Women at Safran, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. Our Wellbeing Program in Pitstone aims to place employee wellbeing at the heart of our business, and we integrate it within all that we do. The program is made up of four wellbeing committees; Healthy Minds, Physical, Social & Financial. Our enhanced family friendly policies re-enforce our commitment to providing a workplace that is both diverse and inclusive.

Tooling Design Engineer Bedfordshire Contract On-site 4-day working week (Mon-Thurs) + flexible working SC Clearance Required About the Role We're recruiting a Tooling Design Engineer to join a fast-paced Special Projects programme. This team operates at the heart of advanced defence and aerospace manufacturing, supporting complex products from early design through production and end-of-life. You'll be part of a highly capable Operations Engineering team, providing tooling and manufacturing engineering expertise across prototype, development and full-rate production programmes. This is a hands-on engineering role with genuine influence on manufacturability, quality, and cost. In return, we offer an exciting technical challenge, exposure to cutting edge defence programmes, and an excellent work/life balance built around a four day working week. What You'll Be Doing Design and develop manufacturing tooling, jigs, fixtures and machine attachments for production and experimental use Support tooling solutions across NC machining, composite lay up and fabrication processes Take tooling designs from concept through detailed design to production release Create technical requirement specifications, detailed drawings and process instructions Produce manufacturing BOMs and routings to support efficient build Apply DFM/A and PFMEA principles to reduce cost and improve yield Actively contribute to Mission Directed Work Team (MDWT Level 1 & 2) meetings Support capital investment activities from definition through acceptance Work closely with Industrial Engineering, Production Engineering and Operations teams Drive a right first time quality mindset and continuous improvement culture What We're Looking For Essential Experience & Skills Background in tooling design within a manufacturing environment Broad manufacturing knowledge including CNC machining, composites, fabrication, mechanical assembly or additive manufacturing Strong CAD experience using CREO, producing 3D models and detailed technical drawings Experience managing data and change control using Windchill (or similar PDM tools) Ability to produce drawings to BS8888 Solid understanding of GD&T, including datum structures and key characteristics Experience creating manufacturing instructions, BOMs and routings Ability to derive tooling requirements directly from product requirements Desirable Knowledge of Lean Manufacturing and Six Sigma tools Experience supporting production environments in regulated or safety critical industries Key Personal Competencies Strong analytical and problem solving skills Confident communicator who can influence stakeholders at all levels Collaborative team player with the ability to work across functions Independent thinker with the confidence to challenge on quality and customer requirements Proven experience driving process, behavioural or cultural improvement Security Clearance SC clearance required to start Candidates must be eligible to hold UK security clearance Why Join? 4 day working week (Mon-Thurs) supporting work/life balance Exposure to high profile, technically complex defence programmes Strong focus on engineering quality, innovation and continuous improvement Opportunities for career development and progression

Are you an experienced mechanical project engineer looking to work on a major UK defence infrastructure programme? Are you driven by quality, delivery, and making a real impact in the built environment? Then Crown House Technologies could be the company for you The Defence Infrastructure Organisation (DIO) has announced the appointment of Laing O'Rourke and five other contractors to a new alliance to build Single Living Accommodation (SLA) for the Armed Forces. The alliance will run for six years and will deliver 16,000 new bedspaces as part of a wider MOD plan to build or refurbish 40,000 SLA bedspaces over ten years. The programme forms part of DIO's new Programmatic Approach for SLA, designed to improve delivery efficiency, drive value for money, and enhance the lived experience for service personnel. CHt will be delivering the MEP works which will be commencing in September this year, with roles based at RAF Waddington (Lincolnshire) or Albemarle Barracks (Northumberland). We are now looking for experienced Mechanical Project Engineers to register their interest ahead of mobilisation. If you join us, you'll be a valued member of an industry leading team and company that can offer you an exciting and varied career with access to nationally significant projects. We are committed to extensive training, development, and long-term career opportunities and as such this role is suitable for someone seeking long-term career progression within project delivery. The Opportunity: As a Mechanical Project Engineer, you'll play a key role in the delivery and installation of mechanical building services, working closely with subcontractors, consultants and the wider project team to respond to technical queries, resolve site issues and coordinate installation activities. What skills &experience are we looking for? Previous project delivery experience on major construction or infrastructure projects (ideally within defence or other highly regulated environments). Strong understanding of mechanical building services installation (HVAC, pipework, plantrooms, etc.). Experience managing subcontractors and coordinating works on site. The ability to select & manage innovative methods, use of materials & safe systems of work. Effective communication with senior management, designers, consultants, clients and the wider project team on technical matters. Practical application of engineering principles and problem-solving in a live construction environment. Establish and oversee local implementation of engineering systems, documentation and controls to comply with H&S legislation and Company standards. First degree in Engineering Discipline (Mechanical), other construction or design related degree, or an industry recognised technical or engineering qualification (NVQ Level 4+). Don't match all the criteria? We are always open and happy to hear from people with transferable skill sets and a commitment to learning. Why register your interest now? These projects are mobilising ahead of a September start, and we are engaging early with experienced mechanical engineers who want to be part of the delivery team from the outset. If you are interested in being considered for opportunities at either Waddington or Albemarle, we encourage you to register your interest now. About us: CHT is one of the UK's most advanced, and innovative, engineering and business services specialists. Part of the Laing O'Rourke Group, and founded on more than 200 years of experience, we are a leading construction and infrastructure technology services provider, supplying a complete Building Services package with communications, ICT, intelligent building, monitoring, BMS and the UK's largest mechanical, electrical & public health manufacturing facility - a 129,000 sq. ft factory - offering Off-site manufacturing and assembly for our digitally engineered modular MEICA packages. We want to ensure our recruitment process is accessible to all. If you need the application form in an alternative format or you would like to know more about our recruitment process, please email

Job Title: Category ManagerLocation: Leeds (Office-based)Type: Permanent, Full-TimeSalary: Competitive Role OverviewSF Recruitment are seeking a highly technical and commercially driven Category Manager to lead sourcing strategy and supplier management for our Leeds based client across a complex manufacturing environment. This role blends strategic procurement with strong engineering awareness, covering mechanical systems, automation, and production line integration. You will be responsible for driving innovation, cost optimisation, and performance improvements through supplier collaboration, technical evaluation, and continuous improvement initiatives. Duties:-Develop and deliver category strategies -Align sourcing strategies with operational, engineering, and capital investment plans-Develop long-term supplier roadmaps focused on innovation, performance, and total cost of ownership-Work closely with engineering and operations teams to define technical specifications and performance requirements-Assess machinery design, mechanical systems, and automation capability during supplier selection-Support standardisation and modularisation of equipment across sites-Lead technical reviews and feasibility assessments for new machinery investments-Manage relationships with OEMs, system integrators, and specialist engineering suppliers-Drive supplier performance across cost, quality, delivery, and technical capability-Negotiate contracts for capital equipment, maintenance agreements, and lifecycle services-Develop strategic supplier partnerships to support innovation and competitive advantage-Drive sustainability improvements in energy efficiency, machine performance, and waste reduction-Lead procurement activity for CAPEX projects Key Skills & Experience-Experience in procurement or category management within industrial equipment or manufacturing environmentsExperience working with OEMs, system integrators, and engineering suppliers-Proven CAPEX procurement and contract negotiation experience-Knowledge of value engineering, cost modelling, and reverse engineering techniques-Strong analytical, problem-solving, and project management skills-Commercially astute with strategic thinking ability-Confident working cross-functionally with engineering and operations teams-Detail-oriented with a structured and analytical approach-Resilient and adaptable in a fast-paced environment If you have the relevant experience for this role and would like further details, please apply with a copy of your CV today.

Senior Laboratory Technologist (Level 6) -Competitive Salary St Leonards-on-Sea, East Sussex The Role Are you ready to take ownership of a laboratory where your ideas shape real products used on major projects? Do you want a hands-on role where you can lead, improve processes and see the impact of your work? If so, this Senior Laboratory Technologist (Level 6) role offers the chance to make a real impact while developing your career in a specialist field. You will step into a position where your knowledge and decisions genuinely matter. You will lead a specialist laboratory, influence how products are developed and ensure high standards are met from concept through to production. This is not just a routine lab role. You will have the opportunity to shape new engineered-stone products, refine processes and bring ideas to life. Your work will be seen in completed buildings across the UK and beyond, giving you a real sense of achievement. You will also benefit from variety in your day-to-day work. From hands-on prototyping to improving methods and supporting colleagues, you will build both your technical expertise and leadership experience. If you are ready to step into a role where your work truly matters, apply today and take the next step in your career. Key Responsibilities: Oversee day-to-day laboratory operations to ensure safe and efficient workflows Develop and refine engineered-stone formulations, including resins and fillers Carry out laboratory prototyping and sample preparation Ensure consistency between lab processes and manufacturing methods Lead physical, mechanical, and fire-performance testing Maintain accurate records, batch data, and documentation Identify improvements in methods and equipment use Support and guide junior laboratory staff Work closely with R&D, production, and regulatory teams The Company Petrarch Ltd is a UK manufacturer of premium reconstituted stone cladding and aluminium framing systems. Our products are used on high-profile projects across the UK, EU, and USA. Quality is at the centre of everything we do. With a 50-year warranty behind our products, we are trusted by architects, designers, and contractors who expect the highest standards. The Benefits Work with advanced materials and modern laboratory equipment See your work used on major international projects Take ownership of a key technical function Be part of a supportive and knowledgeable team Opportunities to grow your expertise and influence The Person To succeed as a Senior Laboratory Technologist (Level 6) , you will bring both technical knowledge and a practical, hands-on approach. You will have: A degree (Level 6) in polymer chemistry, materials science, chemical engineering, or similar Experience in polymer composites, engineered stone, or lab-based manufacturing Strong understanding of lab processes and material systems Confidence working independently and managing priorities A careful and methodical approach with strong attention to detail A clear focus on safety, quality, and continuous improvement

Why join Marshall Land Systems in this role A Mechanical Engineer is required to support the design, development and delivery of robust mechanical solutions across bids and projects. The role will help provide continuity of design intent, maintain configuration control, and support effective coordination across programme, manufacturing, supply chain, quality and integration stakeholders. This is a hybrid role, with an expectation to be onsite in Cambridge around 70% of the time. The role The Mechanical Engineer will support the development of mechanical design solutions across bids and project delivery activities. Working as part of a wider engineering team, the role will involve developing requirements, producing and checking engineering data, supporting configuration control, and contributing to the delivery of safe, compliant and manufacturable solutions. The successful candidate will work closely with colleagues across Engineering and Operations in both the UK and Canada, supporting the delivery of products and systems that meet customer, regulatory, cost and schedule requirements. Your responsibilities will include Support the design and development of mechanical solutions across bids, projects and product modifications. Produce, amend and check engineering drawings, item lists and associated engineering data in line with company processes. Support the generation and development of design requirements from stakeholder and customer needs. Contribute to the development of mechanical architectures and practical design solutions. Work to regulatory, customer and Marshall processes, ensuring engineering outputs are safe, compliant and fit for purpose. Support the preparation and checking of technical documentation, including design data, technical reports and certification evidence. Maintain product, drawing and document configuration control. Work collaboratively with Mechanical, Electrical, Manufacturing, Quality, Supply Chain and Operations teams. Support design for manufacture and assembly activities, working with production and manufacturing teams to develop practical and efficient solutions. Assist with design queries, inspection reports, technical issues and warranty-related investigations. Support technical input into bids, statements of work and project documentation where required. Identify opportunities to improve design quality, cost, manufacturability and delivery performance. Contribute to continuous improvement and challenge existing ways of working where appropriate. What we are looking for Apply if you have most of the following: Degree qualified in Engineering, Mathematics or Physics, or equivalent relevant experience. Experience in mechanical design engineering within a complex or regulated environment. Ability to work from requirements and develop practical engineering solutions. Understanding of engineering standards, product safety and design governance. Experience producing and checking engineering drawings, product structures and associated design data. Understanding of design for manufacture, design for assembly and configuration management. Broad understanding of manufacturing methods such as sheet metal fabrication, welding, riveting and bonding. Strong problem-solving skills with a high level of attention to detail. Ability to work accurately, manage priorities and deliver to timescale. Confidence to provide sound technical input based on facts and engineering judgement. Good communication skills, with the ability to explain technical information clearly to both technical and non-technical audiences. Ability to work effectively across teams, functions and locations. Desirable experience Experience supporting products through production, build, integration or in-service support. Experience contributing to bids, technical proposals or statements of work. Experience preparing technical reports and supporting certification activities. Structural design experience would be beneficial, including understanding of structural theory and experience developing structural solutions, particularly for steel welded frames. The benefits we offer include 27 days holiday, increasing with service up to 30 days, with the option to buy and sell leave Pension contributions up to 9% Private medical insurance Extensive flexible benefits programme including Cycle to Work Life assurance at 4x basic salary Enhanced parental leave and pay Paid volunteering leave Access to industry-leading wellbeing resources and tools Introduction to Marshall Land Systems Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.