Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 01, 2026
Full time
Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Randstad Construction & Property
Wakefield, Yorkshire
Randstad are working with a leading UK Facilities Management provider who is seeking an experienced Hard Services Manager to join their estates team. This role is focused on delivering high-quality, best-value maintenance services while driving a sustainable approach to estates management and providing technical leadership to a multi-discipline team. Package Competitive rate between 30 - 35 per hour (depending on experience) Working Hours: 9am - 5pm, 40 hours per week Schedule: Monday to Friday Position Type: Temporary with opportunity for permanent Duties Maintains full ownership of Building and Asset Maintenance KPIs to ensure all service levels are met and contract penalties are avoided. Leads a multi-discipline team of maintenance engineers and provides the technical guidance needed to resolve complex plant faults. Manages specialist supply chain partners, including market-testing for best value and ensuring work meets quality and cost standards. Coordinates unplanned work and remedial actions rapidly to ensure zero disruption to core operations. Works with the planning team to optimise the CAFM system and schedule preventative maintenance to reduce long-term asset failure. Supports the development of annual budgets and identifies site efficiencies to directly improve contract margins. Authors Risk Assessments and Method Statements for all site works to ensure staff operate safely in high-risk environments. Acts as the engineering lead for the designated area, ensuring all maintained assets have compliant evidence of completion. Operates safe working practices with due regard to Health and Safety Regulations, COSHH, and legislative requirements. Maintains detailed asset histories, maintenance records, and helpdesk reports to inform necessary follow-up actions. Supports the management of systems and processes in line with quality assurance policies to encourage continual improvement. Qualifications: Relevant trade qualification (Mechanical or Electrical). Proven experience managing a multi-disciplined hard FM team. Strong awareness of statutory requirements and technical compliance. Excellent communication and leadership skills. Proficiency in operating IT systems, specifically CAFM software. Experience in budget management, trend identification, and driving cost-effective practices. Full UK Driving Licence. Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 01, 2026
Seasonal
Randstad are working with a leading UK Facilities Management provider who is seeking an experienced Hard Services Manager to join their estates team. This role is focused on delivering high-quality, best-value maintenance services while driving a sustainable approach to estates management and providing technical leadership to a multi-discipline team. Package Competitive rate between 30 - 35 per hour (depending on experience) Working Hours: 9am - 5pm, 40 hours per week Schedule: Monday to Friday Position Type: Temporary with opportunity for permanent Duties Maintains full ownership of Building and Asset Maintenance KPIs to ensure all service levels are met and contract penalties are avoided. Leads a multi-discipline team of maintenance engineers and provides the technical guidance needed to resolve complex plant faults. Manages specialist supply chain partners, including market-testing for best value and ensuring work meets quality and cost standards. Coordinates unplanned work and remedial actions rapidly to ensure zero disruption to core operations. Works with the planning team to optimise the CAFM system and schedule preventative maintenance to reduce long-term asset failure. Supports the development of annual budgets and identifies site efficiencies to directly improve contract margins. Authors Risk Assessments and Method Statements for all site works to ensure staff operate safely in high-risk environments. Acts as the engineering lead for the designated area, ensuring all maintained assets have compliant evidence of completion. Operates safe working practices with due regard to Health and Safety Regulations, COSHH, and legislative requirements. Maintains detailed asset histories, maintenance records, and helpdesk reports to inform necessary follow-up actions. Supports the management of systems and processes in line with quality assurance policies to encourage continual improvement. Qualifications: Relevant trade qualification (Mechanical or Electrical). Proven experience managing a multi-disciplined hard FM team. Strong awareness of statutory requirements and technical compliance. Excellent communication and leadership skills. Proficiency in operating IT systems, specifically CAFM software. Experience in budget management, trend identification, and driving cost-effective practices. Full UK Driving Licence. Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Travail Employment Group
Bishops Cleeve, Gloucestershire
Assembly Technician Location: Bishop's Cleeve Hours: 7:00am - 4:00pm 18 - 20 Per Hour Temporary About the Opportunity We're working with an innovative and growing engineering business based in Bishop's Cleeve, recognised for designing and manufacturing high-quality technical equipment used in demanding environments worldwide. With a strong reputation for precision, reliability, and continuous improvement, this organisation offers a fantastic opportunity for an Assembly Technician to join a close-knit team where your contribution is genuinely valued. The Role This is a hands-on, detail-focused Assembly Technician position where you will be responsible for assembling, wiring and building a range of advanced products. You will play a key role in ensuring all equipment is produced to the highest standards of quality and reliability. A central part of this role is soldering to IPC standards . Whether you already have experience or are looking to further develop your skills, you will be supported to work to recognised IPC soldering standards, making this an excellent opportunity to build specialist expertise. Key responsibilities include: Building and assembling products across various stages of production Carrying out precise soldering in line with IPC standards Identifying and working with electronic components such as resistors and capacitors Interpreting electrical wiring diagrams and mechanical drawings accurately Using a range of hand tools with confidence and precision Maintaining clear and accurate build records and documentation Supporting continuous improvement across production processes Following strict health and safety procedures at all times Working within an Electrostatic Protected Area environment What We're Looking For Previous experience in a hands-on assembly or manufacturing role Strong attention to detail, particularly when working to IPC soldering standards Ability to manage your own workload and prioritise effectively Basic PC literacy for tracking and recording builds A positive, team-oriented approach Confidence working with hand tools in a technical environment Full UK driving licence Experience and Qualifications GCSEs or equivalent Experience in electronics or assembly is beneficial IPC soldering experience or certification is highly advantageous , although training will be provided Why Apply? Competitive hourly rate of 18 - 20 Opportunity to secure a permanent position Early finish every day, supporting a strong work-life balance Opportunity to develop specialist skills in IPC-standard soldering Supportive and collaborative team environment Be part of a growing business where your contribution is visible and valued If you are an Assembly Technician looking to develop your career in a role that places real emphasis on quality, precision and IPC-standard soldering , this is an excellent opportunity to take the next step. Apply today or get in touch to find out more. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
May 01, 2026
Seasonal
Assembly Technician Location: Bishop's Cleeve Hours: 7:00am - 4:00pm 18 - 20 Per Hour Temporary About the Opportunity We're working with an innovative and growing engineering business based in Bishop's Cleeve, recognised for designing and manufacturing high-quality technical equipment used in demanding environments worldwide. With a strong reputation for precision, reliability, and continuous improvement, this organisation offers a fantastic opportunity for an Assembly Technician to join a close-knit team where your contribution is genuinely valued. The Role This is a hands-on, detail-focused Assembly Technician position where you will be responsible for assembling, wiring and building a range of advanced products. You will play a key role in ensuring all equipment is produced to the highest standards of quality and reliability. A central part of this role is soldering to IPC standards . Whether you already have experience or are looking to further develop your skills, you will be supported to work to recognised IPC soldering standards, making this an excellent opportunity to build specialist expertise. Key responsibilities include: Building and assembling products across various stages of production Carrying out precise soldering in line with IPC standards Identifying and working with electronic components such as resistors and capacitors Interpreting electrical wiring diagrams and mechanical drawings accurately Using a range of hand tools with confidence and precision Maintaining clear and accurate build records and documentation Supporting continuous improvement across production processes Following strict health and safety procedures at all times Working within an Electrostatic Protected Area environment What We're Looking For Previous experience in a hands-on assembly or manufacturing role Strong attention to detail, particularly when working to IPC soldering standards Ability to manage your own workload and prioritise effectively Basic PC literacy for tracking and recording builds A positive, team-oriented approach Confidence working with hand tools in a technical environment Full UK driving licence Experience and Qualifications GCSEs or equivalent Experience in electronics or assembly is beneficial IPC soldering experience or certification is highly advantageous , although training will be provided Why Apply? Competitive hourly rate of 18 - 20 Opportunity to secure a permanent position Early finish every day, supporting a strong work-life balance Opportunity to develop specialist skills in IPC-standard soldering Supportive and collaborative team environment Be part of a growing business where your contribution is visible and valued If you are an Assembly Technician looking to develop your career in a role that places real emphasis on quality, precision and IPC-standard soldering , this is an excellent opportunity to take the next step. Apply today or get in touch to find out more. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Job Title: Combat Systems Engineer Location: Portsmouth Naval Base & Portsmouth Broad Oak - hybrid pattern of 3/4 days weekly on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,000 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Within the Warship Technical Authority, WTA, you will provide engineering support to programmes and projects across Warship Support, including Royal Navy surface ship contracts, international naval support, and internal and external consultancy activity. As a Combat Systems Engineer, you will contribute to delivering core service elements such as design change, technical assurance, material state and obsolescence management , specialist support, and future support planning. You will support technical leadership and wider systems engineering, following agreed training and people management processes. Core duties: Providing combat systems engineering support across a wide range of platforms and programmes, encompassing Combat Management Systems, sensors, effectors, networks and weapons systems, while supporting CSM platforms, non CSM tasks and international naval programmes as directed Supporting assigned project(s) Principal and Senior Engineers liaising with internal and external stakeholders (MOD, Overseas Navies, OEMs and project teams) where requested Assisting with the maintenance platform of systems design integrity across diverse engineering contexts, including pan class and cross programme deployments Assisting structured investigations, impact assessments and integration analyses across platform systems for assigned projects to drive evidence-based decisions as directed by project(s) technical lead (s) Supporting safe, efficient implementation of platform systems design change by supporting maintenance of configuration control and holistic integration across affected domains Assisting with collation of evidence for safety case maintenance and Naval Authority/Customer certification submissions Supporting the WTA Combat Systems technical lead for your assigned project(s) and the Hub as directed Essential skills: You will have an awareness of typical UK naval domains with background in combat systems, electrical engineering or munitions You will hold an awareness of defence and maritime standards You will demonstrate a sound understanding of the engineering lifecycle Degree qualified (HND/HNC or equivalent) in Systems Engineering or a related discipline and a commitment to working towards Incorporated Engineer (IEng) status and future professional registration The WTA Combat Systems Team: This position sits within the Warship Technical Authority (WTA) Service Hub, part of the Asset Management team within Warship Support. The WTA delivers Naval whole ship, systems and equipment engineering support and change management. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Combat Systems Engineer Location: Portsmouth Naval Base & Portsmouth Broad Oak - hybrid pattern of 3/4 days weekly on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,000 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Within the Warship Technical Authority, WTA, you will provide engineering support to programmes and projects across Warship Support, including Royal Navy surface ship contracts, international naval support, and internal and external consultancy activity. As a Combat Systems Engineer, you will contribute to delivering core service elements such as design change, technical assurance, material state and obsolescence management , specialist support, and future support planning. You will support technical leadership and wider systems engineering, following agreed training and people management processes. Core duties: Providing combat systems engineering support across a wide range of platforms and programmes, encompassing Combat Management Systems, sensors, effectors, networks and weapons systems, while supporting CSM platforms, non CSM tasks and international naval programmes as directed Supporting assigned project(s) Principal and Senior Engineers liaising with internal and external stakeholders (MOD, Overseas Navies, OEMs and project teams) where requested Assisting with the maintenance platform of systems design integrity across diverse engineering contexts, including pan class and cross programme deployments Assisting structured investigations, impact assessments and integration analyses across platform systems for assigned projects to drive evidence-based decisions as directed by project(s) technical lead (s) Supporting safe, efficient implementation of platform systems design change by supporting maintenance of configuration control and holistic integration across affected domains Assisting with collation of evidence for safety case maintenance and Naval Authority/Customer certification submissions Supporting the WTA Combat Systems technical lead for your assigned project(s) and the Hub as directed Essential skills: You will have an awareness of typical UK naval domains with background in combat systems, electrical engineering or munitions You will hold an awareness of defence and maritime standards You will demonstrate a sound understanding of the engineering lifecycle Degree qualified (HND/HNC or equivalent) in Systems Engineering or a related discipline and a commitment to working towards Incorporated Engineer (IEng) status and future professional registration The WTA Combat Systems Team: This position sits within the Warship Technical Authority (WTA) Service Hub, part of the Asset Management team within Warship Support. The WTA delivers Naval whole ship, systems and equipment engineering support and change management. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Test Design Engineer Location: Glasgow, Cheadle, Crawley, Templecombe Duration: 6 months Rate: £60.91 ph Umbrella Inside IR35 SC Clearance required We are looking for Labview Test Design Engineers who have experience in working with development project teams to develop and deliver test solutions. This can range from a simple test box through to complex fully automated solutions and will require involvement throughout the lifecycle of the solution from concept to completion. You will have an opportunity to influence product design requirements, develop equipment for both product verification and manufacturing phases, and introduce new technologies and ways of working. Each successful candidate will have demonstrable experience of Test Solution Engineering and will ideally have experience interfacing with external customers as well as internal stakeholders. The candidate should be able to demonstrate knowledge in some or all of the following key areas: Specifying, designing and proving software solutions to meet project operational requirements. Proven ability in the design and verification of LabVIEW code, candidates have experience with Small to Medium Scale projects (1-6 Month Development time) in Test Design and LabVIEW Core 1, 2 as a minimum Knowledge of specifying and constructing test sequences using Teststand Knowledge of electronic/electrical design Knowledge of Electronics circuit design Cabling and interconnect design Ability to work to budget and timescale Preparation of test system procurement specifications Testing at circuit board and system level General understanding of design lifecycle Additional Due to the sensitive nature of the product all applicants must have worked within the Defence / Military industry within the last 12 months or be capable of obtaining Security Clearance (SC level minimum).
May 01, 2026
Contractor
Test Design Engineer Location: Glasgow, Cheadle, Crawley, Templecombe Duration: 6 months Rate: £60.91 ph Umbrella Inside IR35 SC Clearance required We are looking for Labview Test Design Engineers who have experience in working with development project teams to develop and deliver test solutions. This can range from a simple test box through to complex fully automated solutions and will require involvement throughout the lifecycle of the solution from concept to completion. You will have an opportunity to influence product design requirements, develop equipment for both product verification and manufacturing phases, and introduce new technologies and ways of working. Each successful candidate will have demonstrable experience of Test Solution Engineering and will ideally have experience interfacing with external customers as well as internal stakeholders. The candidate should be able to demonstrate knowledge in some or all of the following key areas: Specifying, designing and proving software solutions to meet project operational requirements. Proven ability in the design and verification of LabVIEW code, candidates have experience with Small to Medium Scale projects (1-6 Month Development time) in Test Design and LabVIEW Core 1, 2 as a minimum Knowledge of specifying and constructing test sequences using Teststand Knowledge of electronic/electrical design Knowledge of Electronics circuit design Cabling and interconnect design Ability to work to budget and timescale Preparation of test system procurement specifications Testing at circuit board and system level General understanding of design lifecycle Additional Due to the sensitive nature of the product all applicants must have worked within the Defence / Military industry within the last 12 months or be capable of obtaining Security Clearance (SC level minimum).
GBR Recruitment Ltd are working exclusively with a market leading Agricultural Machinery manufacturer, recruiting for an experienced hands on Engineering Manager to successfully lead their engineering department. This is a key senior management team role, where you will mentor, coach & develop the Engineering team to be the very best they can be. You will also play a key role in influencing new product development & product innovation, driving continuous improvement across all Agri products & engineering processes. The client is seeking someone from an Agricultural Machinery (Tractors, Combines, Telehandlers) background or similar specialist products within Construction Plant Machinery or other types of complex high capital specialist machinery / specialist vehicles. You will have formal engineering qualifications & strong knowledge of mechanical, electrical, hydraulic & pneumatic components, parts & systems. Duties: Responsible for leading the engineering team & managing workloads, ensuring the successful delivery of Agri machinery engineering projects & product improvements. Overseeing engineering processes including Engineering Change Requests (ECR) suggests changes, while an Engineering Change Notices (ECN), BOMs, as well as project planning Setting timelines for strategic projects & ensuring the delivery of them Provide accurate costings & quotations for the sales & buying teams Drive CI, LEAN methodology & product innovation Resolving any engineering & product-related issues Performance management of the engineering team Managing outsourced engineering services (external specialists) Creating & updating technical documentation Supporting quality systems (QMS) & the adherence to ISO standards Attributes: Strong Agricultural Engineering experience at a Management or Supervisory level Agricultural or other Engineering qualifications Experience within a design & development environment (D&D / DDE) Strong in managing engineering teams & engineering workloads Strong understanding of engineering principles & product development Strong mechanical, hydraulic, electrical & pneumatic systems experience Strong in Agricultural engineering project management Knowledge of Lean Manufacturing / Lean Methodologies is a bonus Experience with DFMA (Design for Manufacture & Assembly) Familiarity with engineering change systems and project tools Extremely strong leadership, mentoring & coaching skills This role is commutable from Lincoln City, Market Rasen, Louth, Horncastle, Boston, Sleaford, Skegness, Sutton on Sea, Mablethorpe, Grimsby, Spalding, Spilsby, Grantham, Newark & areas close to these. Interviews to take place immediately, apply today!
May 01, 2026
Full time
GBR Recruitment Ltd are working exclusively with a market leading Agricultural Machinery manufacturer, recruiting for an experienced hands on Engineering Manager to successfully lead their engineering department. This is a key senior management team role, where you will mentor, coach & develop the Engineering team to be the very best they can be. You will also play a key role in influencing new product development & product innovation, driving continuous improvement across all Agri products & engineering processes. The client is seeking someone from an Agricultural Machinery (Tractors, Combines, Telehandlers) background or similar specialist products within Construction Plant Machinery or other types of complex high capital specialist machinery / specialist vehicles. You will have formal engineering qualifications & strong knowledge of mechanical, electrical, hydraulic & pneumatic components, parts & systems. Duties: Responsible for leading the engineering team & managing workloads, ensuring the successful delivery of Agri machinery engineering projects & product improvements. Overseeing engineering processes including Engineering Change Requests (ECR) suggests changes, while an Engineering Change Notices (ECN), BOMs, as well as project planning Setting timelines for strategic projects & ensuring the delivery of them Provide accurate costings & quotations for the sales & buying teams Drive CI, LEAN methodology & product innovation Resolving any engineering & product-related issues Performance management of the engineering team Managing outsourced engineering services (external specialists) Creating & updating technical documentation Supporting quality systems (QMS) & the adherence to ISO standards Attributes: Strong Agricultural Engineering experience at a Management or Supervisory level Agricultural or other Engineering qualifications Experience within a design & development environment (D&D / DDE) Strong in managing engineering teams & engineering workloads Strong understanding of engineering principles & product development Strong mechanical, hydraulic, electrical & pneumatic systems experience Strong in Agricultural engineering project management Knowledge of Lean Manufacturing / Lean Methodologies is a bonus Experience with DFMA (Design for Manufacture & Assembly) Familiarity with engineering change systems and project tools Extremely strong leadership, mentoring & coaching skills This role is commutable from Lincoln City, Market Rasen, Louth, Horncastle, Boston, Sleaford, Skegness, Sutton on Sea, Mablethorpe, Grimsby, Spalding, Spilsby, Grantham, Newark & areas close to these. Interviews to take place immediately, apply today!
Control Systems Engineer Exeter Up to 55k Job responsibilities: Interpreting and translating functional, control and system requirements into robust software solutions Producing key design documentation, including I/O lists, Functional Design Specifications (FDS), Software Design Specifications (SDS) and test documentation Programming PLCs and HMIs, primarily Schneider, with exposure to Allen Bradley, Siemens, Omron and Mitsubishi systems Configuring and supporting SCADA platforms such as Wonderware, Rockwell and Siemens Delivering projects on time and within budget, in line with contractual and industry standards Applying expert knowledge of PLC logic, flow?charting and system architecture Interpreting low?voltage electrical drawings and system schematics Attending customer sites as required, representing the business professionally and living the company's values Reviewing, maintaining and updating legacy code where necessary Conducting system analysis and development, often working independently Testing and validating software to ensure full compliance with FDS and test plans Producing clear, consistent and well?structured code documentation aligned with best practice and company standards Experience: HNC, HND or Degree in Computer Science, Software Engineering, Electrical Engineering or Electronic Engineering Strong IT skills, including word processing, spreadsheets and databases Proven experience with PLC programming in a customer?focused environment (Schneider, Allen Bradley, Siemens, Omron or Mitsubishi) Knowledge of SCADA systems and logic auto?generation from templates Understanding of electrical systems and industrial control environments Excellent technical report writing skills, including FDS and test plans Commercial awareness and a strong focus on quality delivery Sound Health & Safety awareness A good standard of secondary education (for trainee-level candidates)
May 01, 2026
Full time
Control Systems Engineer Exeter Up to 55k Job responsibilities: Interpreting and translating functional, control and system requirements into robust software solutions Producing key design documentation, including I/O lists, Functional Design Specifications (FDS), Software Design Specifications (SDS) and test documentation Programming PLCs and HMIs, primarily Schneider, with exposure to Allen Bradley, Siemens, Omron and Mitsubishi systems Configuring and supporting SCADA platforms such as Wonderware, Rockwell and Siemens Delivering projects on time and within budget, in line with contractual and industry standards Applying expert knowledge of PLC logic, flow?charting and system architecture Interpreting low?voltage electrical drawings and system schematics Attending customer sites as required, representing the business professionally and living the company's values Reviewing, maintaining and updating legacy code where necessary Conducting system analysis and development, often working independently Testing and validating software to ensure full compliance with FDS and test plans Producing clear, consistent and well?structured code documentation aligned with best practice and company standards Experience: HNC, HND or Degree in Computer Science, Software Engineering, Electrical Engineering or Electronic Engineering Strong IT skills, including word processing, spreadsheets and databases Proven experience with PLC programming in a customer?focused environment (Schneider, Allen Bradley, Siemens, Omron or Mitsubishi) Knowledge of SCADA systems and logic auto?generation from templates Understanding of electrical systems and industrial control environments Excellent technical report writing skills, including FDS and test plans Commercial awareness and a strong focus on quality delivery Sound Health & Safety awareness A good standard of secondary education (for trainee-level candidates)
Mechanical Building Services Design Engineer Llantrisant 27960/610 40,000 - 45,000 plus healthcare, pension and more. Benefits Package: A starting salary of between 40,000 - 45,000 Company pension scheme Healthcare plan 25 days holidays plus bank holidays This highly successful Mechanical & Electrical Building Services contractor has built a fantastic reputation for the quality, delivery and reliability of their Design and installation services. Extremely highly regarded in their industry, they are experts at delivering complete design services for a diverse client base throughout the UK, across commercial, industrial, government and healthcare sectors. They are growing their Mechanical department and are looking to recruit another two career focused Design Engineers to further support this growth. The role may suit a Mechanical Engineer from a Consultancy, looking to expand thier career within a faster paced environment. Alternatively you may be working for a Contractor and looking for an opportunity which provides a huge amount of autonomy and a chance to help drive the growth of a relatively new Mechanical department. Role & Responsibilities: Develop / implement mechanical building services design solutions, working on several projects simultaneously - commercial, healthcare, industrial. Conduct detailed analyses and calculations. Support the preparation and review of Mechanical design drawings. Liaise with BIM co-ordinators and leading activity in order to ensure that the design packages are produced to the required timescales and standards of quality. Provide support to the Project Managers during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Knowledge, Skills & Experience: Degree Qualified in Mechanical Engineering Demonstratable experience in detailed Building Services Design engineering, including Mechanical calculations on plant equipment, sizing pipework, schematics etc. Proven track record as an Engineer in both a design office and in construction. For further information please email (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 01, 2026
Full time
Mechanical Building Services Design Engineer Llantrisant 27960/610 40,000 - 45,000 plus healthcare, pension and more. Benefits Package: A starting salary of between 40,000 - 45,000 Company pension scheme Healthcare plan 25 days holidays plus bank holidays This highly successful Mechanical & Electrical Building Services contractor has built a fantastic reputation for the quality, delivery and reliability of their Design and installation services. Extremely highly regarded in their industry, they are experts at delivering complete design services for a diverse client base throughout the UK, across commercial, industrial, government and healthcare sectors. They are growing their Mechanical department and are looking to recruit another two career focused Design Engineers to further support this growth. The role may suit a Mechanical Engineer from a Consultancy, looking to expand thier career within a faster paced environment. Alternatively you may be working for a Contractor and looking for an opportunity which provides a huge amount of autonomy and a chance to help drive the growth of a relatively new Mechanical department. Role & Responsibilities: Develop / implement mechanical building services design solutions, working on several projects simultaneously - commercial, healthcare, industrial. Conduct detailed analyses and calculations. Support the preparation and review of Mechanical design drawings. Liaise with BIM co-ordinators and leading activity in order to ensure that the design packages are produced to the required timescales and standards of quality. Provide support to the Project Managers during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Knowledge, Skills & Experience: Degree Qualified in Mechanical Engineering Demonstratable experience in detailed Building Services Design engineering, including Mechanical calculations on plant equipment, sizing pipework, schematics etc. Proven track record as an Engineer in both a design office and in construction. For further information please email (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 01, 2026
Full time
Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 01, 2026
Full time
Job Title: Electrical and Instrumentation Commissioning Engineer Location: Barrow-In-Furness, onsite Salary: £37,091+ Depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you'll carry out Test & Commissioning activities with some guidance while being accountable for specific tasks. You'll take ownership of activities on shift and work towards becoming a Subject Matter Expert (SME) on designated test systems. You'll liaise with stakeholders to ensure work is conducted safely and in compliance with company policies and legislation, while maintaining accurate records and contributing to continuous improvement initiatives . You may also represent the company on Contractor Sea Trials and other outworking requirements. Core duties: Lead and deliver commissioning and maintenance activities with a high degree of autonomy , ensuring full compliance with company policies, procedures, and legislation Maintain and oversee accurate, auditable records of all work activities using company systems Engage and coordinate with stakeholders to ensure safe, efficient, and compliant execution of tasks Review, challenge , produce and provide informed feedback on technical documentation Provide guidance, coaching, and mentoring to less experienced team members Represent the organisation during sea trials and external activities as required Drive adherence to quality, safety, and environmental standards while promoting continuous improvement and best practice Essential Skills: HNC/HND (or equivalent) in a STEM subject or equivalent experience Good understanding of electrical and instrumentation systems, including testing and fault finding Awareness of safety procedures and working in high-risk environments Ability to produce, read and review technical documents and drawings Ability to work both independently and as part of a team Competent in using Microsoft Office and other digital systems The Test and Commissioning Team: Working within a skilled commissioning team, you'll support the delivery of complex engineering systems across nuclear submarine programmes. You'll collaborate with engineers, technicians, and stakeholders while developing technical expertise and gaining exposure to a wide range of systems and technologies. This role provides the opportunity to progress into Subject Matter Expert positions and take on increased responsibility within commissioning and wider engineering functions. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
GBR Recruitment Ltd are working exclusively with a market leading Agricultural Machinery manufacturer, recruiting for an experienced hands on Engineering Manager to successfully lead their engineering department. This is a key senior management team role, where you will mentor, coach & develop the Engineering team to be the very best they can be. You will also play a key role in influencing new product development & product innovation, driving continuous improvement across all Agri products & engineering processes. The client is seeking someone from an Agricultural Machinery (Tractors, Combines, Telehandlers) background or similar specialist products within Construction Plant Machinery or other types of complex high capital specialist machinery / specialist vehicles. You will have formal engineering qualifications & strong knowledge of mechanical, electrical, hydraulic & pneumatic components, parts & systems. Duties: Responsible for leading the engineering team & managing workloads, ensuring the successful delivery of Agri machinery engineering projects & product improvements. Overseeing engineering processes including Engineering Change Requests (ECR) suggests changes, while an Engineering Change Notices (ECN), BOMs, as well as project planning Setting timelines for strategic projects & ensuring the delivery of them Provide accurate costings & quotations for the sales & buying teams Drive CI, LEAN methodology & product innovation Resolving any engineering & product-related issues Performance management of the engineering team Managing outsourced engineering services (external specialists) Creating & updating technical documentation Supporting quality systems (QMS) & the adherence to ISO standards Attributes: Strong Agricultural Engineering experience at a Management or Supervisory level Agricultural or other Engineering qualifications Experience within a design & development environment (D&D / DDE) Strong in managing engineering teams & engineering workloads Strong understanding of engineering principles & product development Strong mechanical, hydraulic, electrical & pneumatic systems experience Strong in Agricultural engineering project management Knowledge of Lean Manufacturing / Lean Methodologies is a bonus Experience with DFMA (Design for Manufacture & Assembly) Familiarity with engineering change systems and project tools Extremely strong leadership, mentoring & coaching skills This role is commutable from Lincoln City, Market Rasen, Louth, Horncastle, Boston, Sleaford, Skegness, Sutton on Sea, Mablethorpe, Grimsby, Spalding, Spilsby, Grantham, Newark & areas close to these. Interviews to take place immediately, apply today!
May 01, 2026
Full time
GBR Recruitment Ltd are working exclusively with a market leading Agricultural Machinery manufacturer, recruiting for an experienced hands on Engineering Manager to successfully lead their engineering department. This is a key senior management team role, where you will mentor, coach & develop the Engineering team to be the very best they can be. You will also play a key role in influencing new product development & product innovation, driving continuous improvement across all Agri products & engineering processes. The client is seeking someone from an Agricultural Machinery (Tractors, Combines, Telehandlers) background or similar specialist products within Construction Plant Machinery or other types of complex high capital specialist machinery / specialist vehicles. You will have formal engineering qualifications & strong knowledge of mechanical, electrical, hydraulic & pneumatic components, parts & systems. Duties: Responsible for leading the engineering team & managing workloads, ensuring the successful delivery of Agri machinery engineering projects & product improvements. Overseeing engineering processes including Engineering Change Requests (ECR) suggests changes, while an Engineering Change Notices (ECN), BOMs, as well as project planning Setting timelines for strategic projects & ensuring the delivery of them Provide accurate costings & quotations for the sales & buying teams Drive CI, LEAN methodology & product innovation Resolving any engineering & product-related issues Performance management of the engineering team Managing outsourced engineering services (external specialists) Creating & updating technical documentation Supporting quality systems (QMS) & the adherence to ISO standards Attributes: Strong Agricultural Engineering experience at a Management or Supervisory level Agricultural or other Engineering qualifications Experience within a design & development environment (D&D / DDE) Strong in managing engineering teams & engineering workloads Strong understanding of engineering principles & product development Strong mechanical, hydraulic, electrical & pneumatic systems experience Strong in Agricultural engineering project management Knowledge of Lean Manufacturing / Lean Methodologies is a bonus Experience with DFMA (Design for Manufacture & Assembly) Familiarity with engineering change systems and project tools Extremely strong leadership, mentoring & coaching skills This role is commutable from Lincoln City, Market Rasen, Louth, Horncastle, Boston, Sleaford, Skegness, Sutton on Sea, Mablethorpe, Grimsby, Spalding, Spilsby, Grantham, Newark & areas close to these. Interviews to take place immediately, apply today!
(Technical Services Manager) - Position Overview Our client, a well-established construction company based in Manchester, is seeking an experienced Technical Services Manager to join the team you'll will play a key part in delivering high-quality design and build, office fit-out, and refurbishment projects, including both CAT A and CAT B works. The Technical Services Manager is responsible for leading and coordinating all building services (MEP) aspects of projects from tender stage through to completion and handover. The role ensures all technical services are delivered in line with client requirements, programme, cost, and quality expectations. (Technical Services Manager) - Position Remuneration Salary - £65,000 - £75,000 (Dependant on experience) Monday to Friday - 40 Hours per week 26 Days Holiday Death in service benefit 4 times gross salary Employee Ownership annual partner tax free bonus scheme (after 12 months service) Discretionary performance bonus scheme Commission for all staff that bring business opportunities to the company. (1% of project value paid after contract has been invoiced) Health Cash Plan Tesco voucher to the value of £50 per month (not contractual and subject to current legislation and staff welfare guidance) Training development support Quarterly company socials Cycle2Work Further alternative pay benefits (ie. Purchase additional holidays, tech scheme) Key Responsibilities Pre-Construction / Estimation Phase Review tender documentation, specifications, and employer's requirements Provide technical input, value engineering, and risk identification Assess programme constraints and phasing validate subcontractor proposals for compliance & CDM Design Development & Coordination Lead MEP design development in line with D&B obligations Manage subcontractors Ensure compliance with Building Control and client requirements Review tender returns and evaluate subcontractors Define scopes of work clearly and ensure ERs are met Advise on subcontractor selection Negotiate betterment from supply chain Construction Phase Monitor installation for quality and compliance Resolve technical issues and clash detection with project teams Conduct site inspections and audits Coordinate builders work in connection with services Commissioning and Handover Develop commissioning programme Oversee testing and commissioning activities Ensure O&M manuals and as-built documentation are submitted Arrange client training and handover Manage defects and close-out Skills & Experience Strong MEP technical knowledge Experience in D&B fit-out projects Tendering and VE Design and subcontractor management Knowledge of UK regulations and standards Commercial awareness Key Competencies Leadership and coordination Problem-solving and decision-making Communication and stakeholder management Attention to detail Time and programme management (Technical Services Manager) - Position Requirements Essential: Strong background in building services engineering (Mechanical or Electrical). Experience in interior fit-out / refurbishment projects (commercial, office, retail, or hospitality). Good understanding of UK building regulations and standards. Ability to read and interpret technical drawings and specifications. Strong coordination and problem-solving skills. Excellent communication and stakeholder management abilities. Desirable: Degree or HNC/HND in Building Services Engineering or related discipline. Membership of a professional body (e.g., Chartered Institution of Building Services Engineers). Experience with BIM and coordination software (e.g., Revit, Navisworks). Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
May 01, 2026
Full time
(Technical Services Manager) - Position Overview Our client, a well-established construction company based in Manchester, is seeking an experienced Technical Services Manager to join the team you'll will play a key part in delivering high-quality design and build, office fit-out, and refurbishment projects, including both CAT A and CAT B works. The Technical Services Manager is responsible for leading and coordinating all building services (MEP) aspects of projects from tender stage through to completion and handover. The role ensures all technical services are delivered in line with client requirements, programme, cost, and quality expectations. (Technical Services Manager) - Position Remuneration Salary - £65,000 - £75,000 (Dependant on experience) Monday to Friday - 40 Hours per week 26 Days Holiday Death in service benefit 4 times gross salary Employee Ownership annual partner tax free bonus scheme (after 12 months service) Discretionary performance bonus scheme Commission for all staff that bring business opportunities to the company. (1% of project value paid after contract has been invoiced) Health Cash Plan Tesco voucher to the value of £50 per month (not contractual and subject to current legislation and staff welfare guidance) Training development support Quarterly company socials Cycle2Work Further alternative pay benefits (ie. Purchase additional holidays, tech scheme) Key Responsibilities Pre-Construction / Estimation Phase Review tender documentation, specifications, and employer's requirements Provide technical input, value engineering, and risk identification Assess programme constraints and phasing validate subcontractor proposals for compliance & CDM Design Development & Coordination Lead MEP design development in line with D&B obligations Manage subcontractors Ensure compliance with Building Control and client requirements Review tender returns and evaluate subcontractors Define scopes of work clearly and ensure ERs are met Advise on subcontractor selection Negotiate betterment from supply chain Construction Phase Monitor installation for quality and compliance Resolve technical issues and clash detection with project teams Conduct site inspections and audits Coordinate builders work in connection with services Commissioning and Handover Develop commissioning programme Oversee testing and commissioning activities Ensure O&M manuals and as-built documentation are submitted Arrange client training and handover Manage defects and close-out Skills & Experience Strong MEP technical knowledge Experience in D&B fit-out projects Tendering and VE Design and subcontractor management Knowledge of UK regulations and standards Commercial awareness Key Competencies Leadership and coordination Problem-solving and decision-making Communication and stakeholder management Attention to detail Time and programme management (Technical Services Manager) - Position Requirements Essential: Strong background in building services engineering (Mechanical or Electrical). Experience in interior fit-out / refurbishment projects (commercial, office, retail, or hospitality). Good understanding of UK building regulations and standards. Ability to read and interpret technical drawings and specifications. Strong coordination and problem-solving skills. Excellent communication and stakeholder management abilities. Desirable: Degree or HNC/HND in Building Services Engineering or related discipline. Membership of a professional body (e.g., Chartered Institution of Building Services Engineers). Experience with BIM and coordination software (e.g., Revit, Navisworks). Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
Are you a Senior Mechatronics Engineer? Do you have experience leading engineering teams and delivering complex mechatronics projects from concept to production? If so, a fast-growing, high-precision motorsport and automotive manufacturer is looking for a Senior Mechatronics Engineer on a permanent basis! Senior Mechatronics Engineer Permanent PositionMonday to Thursday 8-4:45 / Early finish FridayCoventry Senior Mechatronics Engineer The Senior Mechatronics Engineer will have the following responsibilities: Leading the Mechatronics function within the R&D department and delivering projects in line with business and R&D objectives Leading the development of mechatronics products & new technologies across the business. Managing mechatronics resource planning, project timing plans and application engineering activities Defining technical specifications, test requirements and ensuring design targets are achieved in line with DVP&R Providing technical liaison with customers and suppliers, including attending meetings on-site and abroad Senior Mechatronics Engineer The Senior Mechatronics Engineer will require the following experience: Degree in a recognized engineering qualification (Mechatronics related subjects are advantageous) Strong background of mechatronics including mechanical, electrical, hardware and software development Proven leadership experience Company Benefits: Competitive holiday allowance Matched pension scheme Annual bonus scheme Life assurance Annual pay reviews Opportunities for professional development
May 01, 2026
Full time
Are you a Senior Mechatronics Engineer? Do you have experience leading engineering teams and delivering complex mechatronics projects from concept to production? If so, a fast-growing, high-precision motorsport and automotive manufacturer is looking for a Senior Mechatronics Engineer on a permanent basis! Senior Mechatronics Engineer Permanent PositionMonday to Thursday 8-4:45 / Early finish FridayCoventry Senior Mechatronics Engineer The Senior Mechatronics Engineer will have the following responsibilities: Leading the Mechatronics function within the R&D department and delivering projects in line with business and R&D objectives Leading the development of mechatronics products & new technologies across the business. Managing mechatronics resource planning, project timing plans and application engineering activities Defining technical specifications, test requirements and ensuring design targets are achieved in line with DVP&R Providing technical liaison with customers and suppliers, including attending meetings on-site and abroad Senior Mechatronics Engineer The Senior Mechatronics Engineer will require the following experience: Degree in a recognized engineering qualification (Mechatronics related subjects are advantageous) Strong background of mechatronics including mechanical, electrical, hardware and software development Proven leadership experience Company Benefits: Competitive holiday allowance Matched pension scheme Annual bonus scheme Life assurance Annual pay reviews Opportunities for professional development
Our client is a highly respected building services design consultancy providing cost effective and innovative engineering solutions for the bult environment. The business has clear, customers focused goals, which ensure all projects are treated with the necessary care and attention: Enhance client expectations whenever and wherever possible Embrace and utilse the latest technologies and techniques Promote energy efficient solutions Utilise sustainable and renewable products Demonstrate commercial knowledge to deliver affordability Provide an outstanding design solution on programme and within budget With long term work continuing to flood in and year on year growth secure, the company is keen to make a number of additions to enhance the technical design team. One of those priorities is to find a talented MEP Revit Technician to join the Leeds office. The successful candidate will support the delivery of high-quality mechanical, electrical, and public health (MEP) design models and drawings across a diverse range of building services projects. This role is ideal for a proactive technician with strong Revit expertise and a passion for accurate, coordinated BIM outputs. Key Responsibilities Produce coordinated MEP Revit models and technical drawings to a high standard across multiple project stages. Work closely with MEP engineers to translate design intent into efficient and accurate 3D models and 2D deliverables. Maintain and update project models, families, templates, and associated BIM standards. Assist in clash detection, coordination meetings, and integration with multi-disciplinary models. Ensure compliance with project BIM Execution Plans (BEPs) and company protocols. Collaborate with project teams to resolve design issues and maintain model integrity. Support data management, model audits, and quality assurance processes. Contribute to the continuous improvement of BIM workflows within the Leeds office. Skills & Experience Required Proven experience as a Revit Technician within an MEP / building services environment. Strong proficiency in Autodesk Revit MEP; experience with Navisworks is highly desirable. Solid understanding of mechanical, electrical, and public health building services. Ability to read, understand, and interpret engineering drawings and specifications. Familiarity with BIM Level 2 standards and industry best practices. Good communication skills and ability to work effectively within multidisciplinary teams. Strong attention to detail and ability to manage multiple deadlines. Experience of working in an M&E Consultancy and/or M&E Contracting environment. Qualifications HNC/HND or equivalent in Building Services, Mechanical/Electrical Engineering, BIM, or a related discipline (preferred). Autodesk Revit certifications or evidence of formal training
May 01, 2026
Full time
Our client is a highly respected building services design consultancy providing cost effective and innovative engineering solutions for the bult environment. The business has clear, customers focused goals, which ensure all projects are treated with the necessary care and attention: Enhance client expectations whenever and wherever possible Embrace and utilse the latest technologies and techniques Promote energy efficient solutions Utilise sustainable and renewable products Demonstrate commercial knowledge to deliver affordability Provide an outstanding design solution on programme and within budget With long term work continuing to flood in and year on year growth secure, the company is keen to make a number of additions to enhance the technical design team. One of those priorities is to find a talented MEP Revit Technician to join the Leeds office. The successful candidate will support the delivery of high-quality mechanical, electrical, and public health (MEP) design models and drawings across a diverse range of building services projects. This role is ideal for a proactive technician with strong Revit expertise and a passion for accurate, coordinated BIM outputs. Key Responsibilities Produce coordinated MEP Revit models and technical drawings to a high standard across multiple project stages. Work closely with MEP engineers to translate design intent into efficient and accurate 3D models and 2D deliverables. Maintain and update project models, families, templates, and associated BIM standards. Assist in clash detection, coordination meetings, and integration with multi-disciplinary models. Ensure compliance with project BIM Execution Plans (BEPs) and company protocols. Collaborate with project teams to resolve design issues and maintain model integrity. Support data management, model audits, and quality assurance processes. Contribute to the continuous improvement of BIM workflows within the Leeds office. Skills & Experience Required Proven experience as a Revit Technician within an MEP / building services environment. Strong proficiency in Autodesk Revit MEP; experience with Navisworks is highly desirable. Solid understanding of mechanical, electrical, and public health building services. Ability to read, understand, and interpret engineering drawings and specifications. Familiarity with BIM Level 2 standards and industry best practices. Good communication skills and ability to work effectively within multidisciplinary teams. Strong attention to detail and ability to manage multiple deadlines. Experience of working in an M&E Consultancy and/or M&E Contracting environment. Qualifications HNC/HND or equivalent in Building Services, Mechanical/Electrical Engineering, BIM, or a related discipline (preferred). Autodesk Revit certifications or evidence of formal training
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Our client is a market leading company in a niche sector who have been established for over 60 years. They specialise in the supply, manufacture, design, install and service of engineering equipment. An exciting opportunity has arisen for an Administrator to join their team on a permanent basis. In this role, you will support a variety of key functions, including processing orders, handling logistics enquiries, and monitoring stock availability. We are looking for a confident and proactive individual who is comfortable liaising regularly with both customers and suppliers. A full driving licence is essential for this position. Job Description for the Administrator: Process orders for the Sales team using the CRM system Respond to customers by telephone and email Check availability of stock Support with logistics queries Chase suppliers for updates on orders placed Respond to non-technical customer enquiries Support in other areas of the business where required e.g. packing items for despatch Candidate Requirements for the Administrator: Must have experience working in an administrative in a manufacturing, engineering or electrical environment Experience using CRM systems and MS Office Confidence to liaise with customers and suppliers Be able to work within a fast-paced environment Ability to multi-task Ideally hold a BTEC Business Administration qualification Driving licence is essential Must be able to complete a DBS certificate Hours: Monday Friday 9:00 am 5:00 pm Salary: £27,000 Per Annum Brampton Recruitment are an independent Commercial and Accounts & Finance recruitment agency working in partnership with employers spanning Stoke on Trent, Staffordshire, Cheshire, and the Greater Manchester region.
May 01, 2026
Full time
Our client is a market leading company in a niche sector who have been established for over 60 years. They specialise in the supply, manufacture, design, install and service of engineering equipment. An exciting opportunity has arisen for an Administrator to join their team on a permanent basis. In this role, you will support a variety of key functions, including processing orders, handling logistics enquiries, and monitoring stock availability. We are looking for a confident and proactive individual who is comfortable liaising regularly with both customers and suppliers. A full driving licence is essential for this position. Job Description for the Administrator: Process orders for the Sales team using the CRM system Respond to customers by telephone and email Check availability of stock Support with logistics queries Chase suppliers for updates on orders placed Respond to non-technical customer enquiries Support in other areas of the business where required e.g. packing items for despatch Candidate Requirements for the Administrator: Must have experience working in an administrative in a manufacturing, engineering or electrical environment Experience using CRM systems and MS Office Confidence to liaise with customers and suppliers Be able to work within a fast-paced environment Ability to multi-task Ideally hold a BTEC Business Administration qualification Driving licence is essential Must be able to complete a DBS certificate Hours: Monday Friday 9:00 am 5:00 pm Salary: £27,000 Per Annum Brampton Recruitment are an independent Commercial and Accounts & Finance recruitment agency working in partnership with employers spanning Stoke on Trent, Staffordshire, Cheshire, and the Greater Manchester region.
Description As an Electrical Design Engineer, you will play a key role in the design process, from site surveys through to the production of detailed drawings, while developing your technical expertise and working closely with experienced engineers and project teams. Key Responsibilities Manage the design process with the client click apply for full job details
May 01, 2026
Full time
Description As an Electrical Design Engineer, you will play a key role in the design process, from site surveys through to the production of detailed drawings, while developing your technical expertise and working closely with experienced engineers and project teams. Key Responsibilities Manage the design process with the client click apply for full job details
Role: Field Service Engineer - Water Treatment Shift: Days (Field Based) Salary: £40,000 to £43,000 + Profit Related Bonus ( 10%) Location: Home Based - South West Are you a time-served Maintenance Engineer looking to move into a field-based role where you can use your fault-finding skills across a variety of industrial systems? This is a great opportunity to step into industrial water treatment, working on critical plant used across sectors including food, pharmaceutical, aerospace and manufacturing. You don't need prior water treatment experience - what matters is your engineering background. Full training will be provided and you will be given progression opportunties within the business to take your career to the next level. The Company A specialist engineering business supporting industrial customers across the UK, Europe and beyond. They design, install and maintain water treatment systems used in production and utilities, covering the full lifecycle from build and commissioning through to service, upgrades and technical support. The Role As a Field Service Engineer, you'll support customers across mainly the South West, carrying out servicing, maintenance and fault finding on industrial water treatment systems. You'll typically work on one job per day, giving you time to complete work properly without being rushed between sites. Responsibilities: Planned preventative maintenance and servicing of water treatment systemsFault finding across mechanical and electrical systemsStrip down, repair and replacement of components such as pumps, valves, filters and membranesSupporting installation and commissioning projects as experience developsCompleting service reports and documentationWorking closely with customers on-site to ensure systems run reliably Typical equipment: Pumps, valves and pipework systemsFiltration skids and treatment unitsReverse osmosis and deionisation systemsDosing systems and effluent plantMotors, panels, sensors and PLC-controlled equipment The role is slightly mechanically biased, but you'll need a solid understanding of electrical systems and controls. Working Pattern & Travel 40-hour weekOne job per day structureIf the job is done and paperwork is complete, you finish for the dayNo call-out rotaTravel is primarily across the South West, with: Occasional UK travelAll accommodation arranged and paid for any commute over 2 hours What We're Looking For Apprentice-trained or time-served Maintenance EngineerStrong mechanical skills (pumps, valves, pipework, strip down work)Basic electrical competence (motors, panels, sensors, fault finding)Comfortable working independently and dealing with customersFull UK driving licenceWater treatment experience is beneficial but not essential. Engineers from manufacturing, utilities, chemical, food, agricultural or similar environments are all encouraged to apply. What You'll Get in Return Salary up to a max £43,000 depending on experienceProfit-related bonus ( 10%)Company vehicle and fuel cardTools, phone and tablet providedHealth cash planPension There is also clear progression within the business, including opportunities to develop into more senior roles and potentially support international commissioning projects longer term. Are you up for the challenge?If you're looking for a move into field service with more variety, autonomy and long-term development, get in touch today.
May 01, 2026
Full time
Role: Field Service Engineer - Water Treatment Shift: Days (Field Based) Salary: £40,000 to £43,000 + Profit Related Bonus ( 10%) Location: Home Based - South West Are you a time-served Maintenance Engineer looking to move into a field-based role where you can use your fault-finding skills across a variety of industrial systems? This is a great opportunity to step into industrial water treatment, working on critical plant used across sectors including food, pharmaceutical, aerospace and manufacturing. You don't need prior water treatment experience - what matters is your engineering background. Full training will be provided and you will be given progression opportunties within the business to take your career to the next level. The Company A specialist engineering business supporting industrial customers across the UK, Europe and beyond. They design, install and maintain water treatment systems used in production and utilities, covering the full lifecycle from build and commissioning through to service, upgrades and technical support. The Role As a Field Service Engineer, you'll support customers across mainly the South West, carrying out servicing, maintenance and fault finding on industrial water treatment systems. You'll typically work on one job per day, giving you time to complete work properly without being rushed between sites. Responsibilities: Planned preventative maintenance and servicing of water treatment systemsFault finding across mechanical and electrical systemsStrip down, repair and replacement of components such as pumps, valves, filters and membranesSupporting installation and commissioning projects as experience developsCompleting service reports and documentationWorking closely with customers on-site to ensure systems run reliably Typical equipment: Pumps, valves and pipework systemsFiltration skids and treatment unitsReverse osmosis and deionisation systemsDosing systems and effluent plantMotors, panels, sensors and PLC-controlled equipment The role is slightly mechanically biased, but you'll need a solid understanding of electrical systems and controls. Working Pattern & Travel 40-hour weekOne job per day structureIf the job is done and paperwork is complete, you finish for the dayNo call-out rotaTravel is primarily across the South West, with: Occasional UK travelAll accommodation arranged and paid for any commute over 2 hours What We're Looking For Apprentice-trained or time-served Maintenance EngineerStrong mechanical skills (pumps, valves, pipework, strip down work)Basic electrical competence (motors, panels, sensors, fault finding)Comfortable working independently and dealing with customersFull UK driving licenceWater treatment experience is beneficial but not essential. Engineers from manufacturing, utilities, chemical, food, agricultural or similar environments are all encouraged to apply. What You'll Get in Return Salary up to a max £43,000 depending on experienceProfit-related bonus ( 10%)Company vehicle and fuel cardTools, phone and tablet providedHealth cash planPension There is also clear progression within the business, including opportunities to develop into more senior roles and potentially support international commissioning projects longer term. Are you up for the challenge?If you're looking for a move into field service with more variety, autonomy and long-term development, get in touch today.
We are looking for a Senior Back-End Developer to join our growing team at Aisthesis Medical. This is a unique opportunity to play a key role in shaping the backend systems of a fast-moving MedTech startup working at the intersection of AI and clinical decision support. You will lead the development of scalable, secure, and high-performance backend infrastructure that supports real-time healthcare data processing and predictive analytics. Responsibilities Architect and implement robust, scalable, and secure backend services and APIs; Ensure system performance, reliability, and fault-tolerance; Integrate external APIs and ensure interoperability with Electronic Health Record (EHR) systems; Contribute to deployment and monitoring of production systems using modern DevOps practices; Design, implement, and deploy software components in a microservice architecture that perform biomedical information processing; Work closely with product, UX, and clinical teams, analyze customer requirements, and rapidly implement prototypes introducing new functionality; Maintain a high standard of code quality through testing, documentation, and peer reviews; Collaborate in an agile environment, striking the right balance between rapid iteration with long-term maintainability and well-tested code. Minimum Qualifications We are looking for professionals with the following skills and experience: BSc/MSc in Computer Science, Electrical and Computer Engineering or similar; Strong proficiency in Python with production-grade back-end frameworks such as Django or FastAPI; Solid understanding of RESTful API design and microservices architecture; Experience on production and DevOps fundamentals Experience with Docker, CI/CD pipelines; Experience on Infrastructure as Code (IaC) using CloudFormation (or Terraform); Experience running production workloads on AWS (or Azure, GCP); Familiarity with PostgreSQL or other relational databases; Ability to understand business and product requirements and translate them into technical requirements; Strong ownership mindset and ability to work in a fast-paced startup environment; Comfortable working in a hybrid setup with in-person collaboration when needed; Fluent in English with excellent communication, collaboration, and problem-solving skills. Nice-to-Haves If you have the following, it's a strong plus: Experience working with healthcare data (FHIR, HL7) or clinical systems; Experience working under European Medical Device Regulations (ISO13485, IEC62304, ISO14971, etc.) Familiarity with event-driven architectures and message queues (e.g., Kafka, RabbitMQ); Understanding of data privacy, security, and compliance standards (GDPR, HIPAA); Exposure to machine learning pipelines or MLOps; Familiarity with UI/UX best practices; Passion for writing clean, maintainable, and scalable code; Mentality of commit early and often, metrics before models, and shipping high quality production code; A love of learning and enjoyment of trying new things; Startup experience or interest in working in a high-growth environment. Team Culture We treat each other with respect, humility, and openness; We value curiosity, experimentation, and fast learning; We embrace flexibility and focus on solving real-world problems that matter; We believe in diversity-of background, perspective, and skill set; We value open dialogue and brainstorming across multidisciplinary teams; We prioritize deep work, async collaboration, and only meet when it matters; Work from anywhere in the world (within 3h of GMT), as long as the WiFi's solid. What We Offer Competitive salary tailored to your experience and skills; Remote-first work scheme with in-person collaboration when needed; A mission-driven, close-knit team working on meaningful problems; Opportunities for personal growth through conferences, events, and mentorship.
May 01, 2026
Full time
We are looking for a Senior Back-End Developer to join our growing team at Aisthesis Medical. This is a unique opportunity to play a key role in shaping the backend systems of a fast-moving MedTech startup working at the intersection of AI and clinical decision support. You will lead the development of scalable, secure, and high-performance backend infrastructure that supports real-time healthcare data processing and predictive analytics. Responsibilities Architect and implement robust, scalable, and secure backend services and APIs; Ensure system performance, reliability, and fault-tolerance; Integrate external APIs and ensure interoperability with Electronic Health Record (EHR) systems; Contribute to deployment and monitoring of production systems using modern DevOps practices; Design, implement, and deploy software components in a microservice architecture that perform biomedical information processing; Work closely with product, UX, and clinical teams, analyze customer requirements, and rapidly implement prototypes introducing new functionality; Maintain a high standard of code quality through testing, documentation, and peer reviews; Collaborate in an agile environment, striking the right balance between rapid iteration with long-term maintainability and well-tested code. Minimum Qualifications We are looking for professionals with the following skills and experience: BSc/MSc in Computer Science, Electrical and Computer Engineering or similar; Strong proficiency in Python with production-grade back-end frameworks such as Django or FastAPI; Solid understanding of RESTful API design and microservices architecture; Experience on production and DevOps fundamentals Experience with Docker, CI/CD pipelines; Experience on Infrastructure as Code (IaC) using CloudFormation (or Terraform); Experience running production workloads on AWS (or Azure, GCP); Familiarity with PostgreSQL or other relational databases; Ability to understand business and product requirements and translate them into technical requirements; Strong ownership mindset and ability to work in a fast-paced startup environment; Comfortable working in a hybrid setup with in-person collaboration when needed; Fluent in English with excellent communication, collaboration, and problem-solving skills. Nice-to-Haves If you have the following, it's a strong plus: Experience working with healthcare data (FHIR, HL7) or clinical systems; Experience working under European Medical Device Regulations (ISO13485, IEC62304, ISO14971, etc.) Familiarity with event-driven architectures and message queues (e.g., Kafka, RabbitMQ); Understanding of data privacy, security, and compliance standards (GDPR, HIPAA); Exposure to machine learning pipelines or MLOps; Familiarity with UI/UX best practices; Passion for writing clean, maintainable, and scalable code; Mentality of commit early and often, metrics before models, and shipping high quality production code; A love of learning and enjoyment of trying new things; Startup experience or interest in working in a high-growth environment. Team Culture We treat each other with respect, humility, and openness; We value curiosity, experimentation, and fast learning; We embrace flexibility and focus on solving real-world problems that matter; We believe in diversity-of background, perspective, and skill set; We value open dialogue and brainstorming across multidisciplinary teams; We prioritize deep work, async collaboration, and only meet when it matters; Work from anywhere in the world (within 3h of GMT), as long as the WiFi's solid. What We Offer Competitive salary tailored to your experience and skills; Remote-first work scheme with in-person collaboration when needed; A mission-driven, close-knit team working on meaningful problems; Opportunities for personal growth through conferences, events, and mentorship.
Electrical Design Engineer (Building Services) Salary: £35,000 - £45,000 Based within a growing multi-discipline building services design team, you will have the chance to work on a huge range of high-profile complex projects, and operate across multiple sectors - such as commercial, residential as well as mixed use, hotel, retail and healthcare. You will be alongside some of the best engineers as well as excellent progression and development opportunities towards even more senior roles in the coming years. Skills & Qualifications: Degree qualified in Electrical Engineering or similar Able to design and deliver electrical engineering solutions on medium/large complex projects Excellent knowledge of the relevant design standards, legislation, best practice and emerging technology Sustainability focussed Able to understand the balance of engineering priorities on differing projects Proactively and energetically interact in a cross-functional team environment and be open minded to new ideas and concepts Sociable, outgoing and professional manner Highly motivated and willing to take on new challenges All respondents to this position must be eligible to live and work in the UK We aim to encourage a culture where people can be themselves and valued for their contribution Falcon Recruitment Services are one of the UK's leading specialist recruitment agencies, specialising within the built environment. We place all levels of personnel, up to directorship level across the UK and internationally.
May 01, 2026
Full time
Electrical Design Engineer (Building Services) Salary: £35,000 - £45,000 Based within a growing multi-discipline building services design team, you will have the chance to work on a huge range of high-profile complex projects, and operate across multiple sectors - such as commercial, residential as well as mixed use, hotel, retail and healthcare. You will be alongside some of the best engineers as well as excellent progression and development opportunities towards even more senior roles in the coming years. Skills & Qualifications: Degree qualified in Electrical Engineering or similar Able to design and deliver electrical engineering solutions on medium/large complex projects Excellent knowledge of the relevant design standards, legislation, best practice and emerging technology Sustainability focussed Able to understand the balance of engineering priorities on differing projects Proactively and energetically interact in a cross-functional team environment and be open minded to new ideas and concepts Sociable, outgoing and professional manner Highly motivated and willing to take on new challenges All respondents to this position must be eligible to live and work in the UK We aim to encourage a culture where people can be themselves and valued for their contribution Falcon Recruitment Services are one of the UK's leading specialist recruitment agencies, specialising within the built environment. We place all levels of personnel, up to directorship level across the UK and internationally.
