Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Apr 30, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
I'm partnering with a long-established UK engineering company in the power systems sector to appoint a Technical Director specialising in high-voltage (HV) and extra-high-voltage (EHV) substation testing and commissioning . This is a senior leadership position acting as the technical authority across grid infrastructure projects , combining strategic oversight with deep, hands-on expertise. You'll play a pivotal role in shaping engineering standards, leading commissioning activities, and ensuring the successful delivery of complex AIS and GIS substation projects across transmission and distribution (T&D) networks. Key responsibilities: Technical Governance & Strategy Define and implement engineering strategies, protection philosophies , and commissioning procedures Ensure alignment with international standards and UK utility requirements (e.g. National Grid, SSE, Scottish Power) Act as the ultimate technical authority across HV/EHV projects Project Oversight Provide leadership from FEED (Front End Engineering Design) through detailed design, construction, and final commissioning Oversee technical delivery across the full project lifecycle within transmission and distribution networks Site & Commissioning Support Lead and support complex testing and commissioning activities on HV/EHV substations Resolve critical site issues, technical queries, and design deviations Provide expert input on AIS (Air Insulated Switchgear) and GIS (Gas Insulated Switchgear) systems Quality & Safety Assurance Ensure all Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) meet stringent quality, safety, and environmental standards Champion a "safety in design" and commissioning culture across all projects Leadership & Mentorship Mentor and develop engineering teams, including commissioning engineers and design staff Act as a subject matter expert in client and stakeholder engagements Drive continuous improvement in technical delivery and engineering excellence Requirements: Bachelor's degree in Electrical Engineering (or equivalent experience) Extensive experience in HV/EHV substation design, testing, and commissioning within T&D environments Deep knowledge of: Protection & Control (P&C) systems Primary plant (transformers, switchgear, CTs/VTs) Secondary systems and substation automation Strong experience with AIS and GIS substations Proven ability to develop test procedures , analyse protection relay settings , and lead commissioning teams on major infrastructure projects Demonstrated leadership experience in senior or principal engineering roles Desirable: Chartered Engineer (CEng) status or equivalent Experience working with National Grid, SSE, Scottish Power , or similar utilities Familiarity with IEC standards and modern substation automation protocols (e.g. IEC 61850) Track record of leading large-scale or multi-site commissioning programmes What's on offer: Executive-level technical leadership role within a specialist engineering business Opportunity to shape and influence delivery of critical UK energy infrastructure High-impact role combining strategy, leadership, and hands-on engineering Flexible working with site exposure across major grid projects Competitive salary and benefits package The salary is 80,000 to 100,000 (flex on this) plus car allowance and an annual bonus.
Apr 30, 2026
Full time
I'm partnering with a long-established UK engineering company in the power systems sector to appoint a Technical Director specialising in high-voltage (HV) and extra-high-voltage (EHV) substation testing and commissioning . This is a senior leadership position acting as the technical authority across grid infrastructure projects , combining strategic oversight with deep, hands-on expertise. You'll play a pivotal role in shaping engineering standards, leading commissioning activities, and ensuring the successful delivery of complex AIS and GIS substation projects across transmission and distribution (T&D) networks. Key responsibilities: Technical Governance & Strategy Define and implement engineering strategies, protection philosophies , and commissioning procedures Ensure alignment with international standards and UK utility requirements (e.g. National Grid, SSE, Scottish Power) Act as the ultimate technical authority across HV/EHV projects Project Oversight Provide leadership from FEED (Front End Engineering Design) through detailed design, construction, and final commissioning Oversee technical delivery across the full project lifecycle within transmission and distribution networks Site & Commissioning Support Lead and support complex testing and commissioning activities on HV/EHV substations Resolve critical site issues, technical queries, and design deviations Provide expert input on AIS (Air Insulated Switchgear) and GIS (Gas Insulated Switchgear) systems Quality & Safety Assurance Ensure all Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) meet stringent quality, safety, and environmental standards Champion a "safety in design" and commissioning culture across all projects Leadership & Mentorship Mentor and develop engineering teams, including commissioning engineers and design staff Act as a subject matter expert in client and stakeholder engagements Drive continuous improvement in technical delivery and engineering excellence Requirements: Bachelor's degree in Electrical Engineering (or equivalent experience) Extensive experience in HV/EHV substation design, testing, and commissioning within T&D environments Deep knowledge of: Protection & Control (P&C) systems Primary plant (transformers, switchgear, CTs/VTs) Secondary systems and substation automation Strong experience with AIS and GIS substations Proven ability to develop test procedures , analyse protection relay settings , and lead commissioning teams on major infrastructure projects Demonstrated leadership experience in senior or principal engineering roles Desirable: Chartered Engineer (CEng) status or equivalent Experience working with National Grid, SSE, Scottish Power , or similar utilities Familiarity with IEC standards and modern substation automation protocols (e.g. IEC 61850) Track record of leading large-scale or multi-site commissioning programmes What's on offer: Executive-level technical leadership role within a specialist engineering business Opportunity to shape and influence delivery of critical UK energy infrastructure High-impact role combining strategy, leadership, and hands-on engineering Flexible working with site exposure across major grid projects Competitive salary and benefits package The salary is 80,000 to 100,000 (flex on this) plus car allowance and an annual bonus.
Our client BAE Systems, a prominent player in the Defence & Security sector, is currently seeking a Principal Electrical Engineer to join their team on a contract basis. This opportunity involves working on vital projects within the maritime services business unit. The role will be predominantly site-based at either Cowes, Great Baddow or Broad Oak in Portsmouth with hybrid arrangements allowing for 4 days on-site. You will be working within a high-security clearance environment, contributing to critical design and engineering activities over a period of 6 months. Key Responsibilities: Apply depth and breadth of design expertise to generate electrical design solutions for new products and technology integrations into legacy products. Generate detailed designs from concept to completion, addressing a range of complex engineering issues. Function as an engineering, technical, or design authority for Line Replacement Units or subsystems. Core Duties: Design AC & DC distribution systems including sizing, protection, control, and specifying power supplies and converters. Work on motor drives, control, and positioning systems. Manage data links, protocols, networks, and EMC verification. Specify bespoke procured hardware. Conduct design verification using simulation, analysis, and test techniques, including support to EMC test houses and customer installations. Engage in integration activities within a complex equipment environment. Generate design documentation and technical reports; vet documentation generated by others. Interface with related disciplines like systems engineering, mechanical/thermal engineering, Integrated Logistics Support, Safety, and manufacturing. Ensure adherence to the Engineering Lifecycle and conduct progress, peer, and design reviews. Contribute to bids, proposals, and estimates; provide technical leadership and guidance on electrical matters. Job Requirements: Experience in generating component-level designs for volume production. Previous experience in operating within a defence or high safety integrity environment. Familiarity with the IET 17th Edition Wiring Regulations, Low Voltage Directive, European Electrical Safety Standards, and EMC qualification to DEF STAN 59-411. Experience in design proving, integration, and defect resolution. Rigorous approach to the safety aspects associated with high power/high voltage equipment. Degree in Electrical Engineering or a strongly related subject. Skills: Proficient in technical specifications aligned to the functional area of activity. Recognised within the team or project as a source of authoritative knowledge. Experience acting as Design Authority, Technical Authority, or Engineering Authority. Capable of performing analysis, evaluation, and resolution of complex engineering issues and specifications. Safety Responsibilities: Take reasonable care for your own health and safety. Ensure high standards for safety, health, and environment (SHE) in the organisation. Cooperate and follow all reasonable instructions, information, and training. Report work-related hazards or incidents and use equipment for its intended purpose. If you are an experienced Electrical Engineer looking for a challenging role within the defence sector, we encourage you to apply now to join our client's dynamic team.
Apr 29, 2026
Contractor
Our client BAE Systems, a prominent player in the Defence & Security sector, is currently seeking a Principal Electrical Engineer to join their team on a contract basis. This opportunity involves working on vital projects within the maritime services business unit. The role will be predominantly site-based at either Cowes, Great Baddow or Broad Oak in Portsmouth with hybrid arrangements allowing for 4 days on-site. You will be working within a high-security clearance environment, contributing to critical design and engineering activities over a period of 6 months. Key Responsibilities: Apply depth and breadth of design expertise to generate electrical design solutions for new products and technology integrations into legacy products. Generate detailed designs from concept to completion, addressing a range of complex engineering issues. Function as an engineering, technical, or design authority for Line Replacement Units or subsystems. Core Duties: Design AC & DC distribution systems including sizing, protection, control, and specifying power supplies and converters. Work on motor drives, control, and positioning systems. Manage data links, protocols, networks, and EMC verification. Specify bespoke procured hardware. Conduct design verification using simulation, analysis, and test techniques, including support to EMC test houses and customer installations. Engage in integration activities within a complex equipment environment. Generate design documentation and technical reports; vet documentation generated by others. Interface with related disciplines like systems engineering, mechanical/thermal engineering, Integrated Logistics Support, Safety, and manufacturing. Ensure adherence to the Engineering Lifecycle and conduct progress, peer, and design reviews. Contribute to bids, proposals, and estimates; provide technical leadership and guidance on electrical matters. Job Requirements: Experience in generating component-level designs for volume production. Previous experience in operating within a defence or high safety integrity environment. Familiarity with the IET 17th Edition Wiring Regulations, Low Voltage Directive, European Electrical Safety Standards, and EMC qualification to DEF STAN 59-411. Experience in design proving, integration, and defect resolution. Rigorous approach to the safety aspects associated with high power/high voltage equipment. Degree in Electrical Engineering or a strongly related subject. Skills: Proficient in technical specifications aligned to the functional area of activity. Recognised within the team or project as a source of authoritative knowledge. Experience acting as Design Authority, Technical Authority, or Engineering Authority. Capable of performing analysis, evaluation, and resolution of complex engineering issues and specifications. Safety Responsibilities: Take reasonable care for your own health and safety. Ensure high standards for safety, health, and environment (SHE) in the organisation. Cooperate and follow all reasonable instructions, information, and training. Report work-related hazards or incidents and use equipment for its intended purpose. If you are an experienced Electrical Engineer looking for a challenging role within the defence sector, we encourage you to apply now to join our client's dynamic team.
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
Apr 28, 2026
Full time
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
Lead Substations Plant Engineer (m/f/d)- Transmission & Distribution Are you an experienced extra high voltage or high voltage engineer? Do you want to push the boundaries of your profession and develop in an open, collaborative, and empowering culture? Are you looking for an exciting new challenge? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Transmission and Distribution Department as our new Lead Substations Plant Engineer (m/f/d) and work with us to close the gap to a sustainable future. Your new role The principal function of this position is to lead and oversee electrical design activities within the team, directed by the Head of T&D, and to assist in developing the Group's capabilities in HV/EHV Engineering. The role includes a senior project role focused on coordinated and compliant design, client liaison, mentoring, and coaching junior team members. Responsibilities include meetings with clients, contractors, and designers, requiring strong communication skills and relevant experience. Site visits or visits to non-UK design offices may be required during design and delivery. The role involves taking responsibility for Work Package Design Management, including all reporting to satisfy design management requirements. Your key responsibilities will be Lead role for primary design of HV and EHV substations in compliance with relevant BS, IEC, and customer-specified standards. Responsibility for coordination of design of substation and/or OH/cable design from concept to detailed design as per client requirements. Multidisciplinary design management and client management. Liaison with other members of the T&D design team, power systems team and client engineers. Technical management of junior engineers and CAD draught professionals. Accountable for compliant and coordinated primary engineering design on own projects as well as for other team members. Attend technical meetings with the client to ensure client satisfaction. Development and training of junior engineers. About you HNC/HND/Degree qualified in Electrical Engineering with experience in the UK Electricity Transmission and Distribution industry. Ideally NG authorised. Membership of the IET, Chartered status, or working towards Chartered Engineer status. Experience of working and/or authorisation with major UK utilities such as NG or DNO companies. Possess a proficient understanding of the electricity industry & regulatory standards, policies, and their application to the role. Strong electrical knowledge and experience in the equipment design, specification, layout, and detailed engineering of extra and high voltage substation electrical equipment and product range. A good understanding of electrical plant, transformer, protection, relays, and control principles and construction disciplines and current ENA, BS, and IEC electrotechnical engineering standards, to ensure full application and compliance requirements can be achieved. Multi-disciplinary design management experience. An ability and willingness to work in a multi-disciplinary and multi-locational team environment in collaboration with our clients. Dedicated to a Net Zero future. What we can offer you Commitment to your development. Leaders guided by our Leadership Principles. A culture that welcomes you as the unique person you are. Inspiration from colleagues, clients, and projects. The long term thinking of a foundation owned company. Flexible work environment. 27 days annual leave plus bank holidays. Matched pension contributions. Private medical cover and life assurance. Equality, diversity, and inclusion are at the heart of what we do.
Apr 25, 2026
Full time
Lead Substations Plant Engineer (m/f/d)- Transmission & Distribution Are you an experienced extra high voltage or high voltage engineer? Do you want to push the boundaries of your profession and develop in an open, collaborative, and empowering culture? Are you looking for an exciting new challenge? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Transmission and Distribution Department as our new Lead Substations Plant Engineer (m/f/d) and work with us to close the gap to a sustainable future. Your new role The principal function of this position is to lead and oversee electrical design activities within the team, directed by the Head of T&D, and to assist in developing the Group's capabilities in HV/EHV Engineering. The role includes a senior project role focused on coordinated and compliant design, client liaison, mentoring, and coaching junior team members. Responsibilities include meetings with clients, contractors, and designers, requiring strong communication skills and relevant experience. Site visits or visits to non-UK design offices may be required during design and delivery. The role involves taking responsibility for Work Package Design Management, including all reporting to satisfy design management requirements. Your key responsibilities will be Lead role for primary design of HV and EHV substations in compliance with relevant BS, IEC, and customer-specified standards. Responsibility for coordination of design of substation and/or OH/cable design from concept to detailed design as per client requirements. Multidisciplinary design management and client management. Liaison with other members of the T&D design team, power systems team and client engineers. Technical management of junior engineers and CAD draught professionals. Accountable for compliant and coordinated primary engineering design on own projects as well as for other team members. Attend technical meetings with the client to ensure client satisfaction. Development and training of junior engineers. About you HNC/HND/Degree qualified in Electrical Engineering with experience in the UK Electricity Transmission and Distribution industry. Ideally NG authorised. Membership of the IET, Chartered status, or working towards Chartered Engineer status. Experience of working and/or authorisation with major UK utilities such as NG or DNO companies. Possess a proficient understanding of the electricity industry & regulatory standards, policies, and their application to the role. Strong electrical knowledge and experience in the equipment design, specification, layout, and detailed engineering of extra and high voltage substation electrical equipment and product range. A good understanding of electrical plant, transformer, protection, relays, and control principles and construction disciplines and current ENA, BS, and IEC electrotechnical engineering standards, to ensure full application and compliance requirements can be achieved. Multi-disciplinary design management experience. An ability and willingness to work in a multi-disciplinary and multi-locational team environment in collaboration with our clients. Dedicated to a Net Zero future. What we can offer you Commitment to your development. Leaders guided by our Leadership Principles. A culture that welcomes you as the unique person you are. Inspiration from colleagues, clients, and projects. The long term thinking of a foundation owned company. Flexible work environment. 27 days annual leave plus bank holidays. Matched pension contributions. Private medical cover and life assurance. Equality, diversity, and inclusion are at the heart of what we do.
Company An extremely successful premium brand in the industry, operating as an international, multidisciplinary engineering consultancy. This provides the chance to work on innovative and exciting medium-large scale developments across a variety of private and public sector buildings, often partnered with top tier architects and clients. The business have an extremely healthy existing and pipelined workload, comprising of new-build, refurb, Passivhaus, Enerphit and BIM jobs. This is an excellent opportunity to join a well-established brand, where candidate feedback in the market has been very positive, gaining access to stand-out projects, whilst receiving an industry leading benefits package. A very progressive, diverse and flexible workplace with a stunning modern office. Role Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems . Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc. Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc. Representing the organisation at meetings with clients and contractors. Site surveys, inspections and monitoring of site works. Report and technical note writing. Maintaining complete records and archives to company standards. Adherence to all quality, environmental and governance processes. Qualifications / Experience Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects. Chartered Engineer with CIBSE or IET or working towards this. . Good level of computer literacy in a range of digital tools such as CAD, Amtech, Relux, package, and Microsoft packages Experience working in a design consultancy and/or experience of working within a contractor design environment is essential. Have a detailed knowledge of appropriate technical standards. Benefits 28 days annual leave + public holidays Company car or cash allowance Up to 6% matched contributory pension plan Hybrid working Flexible working hours Life assurance scheme Discount scheme (including gym membership, mobile phones etc) Family friendly policies Employee assistance Professional Development Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.
Oct 03, 2025
Full time
Company An extremely successful premium brand in the industry, operating as an international, multidisciplinary engineering consultancy. This provides the chance to work on innovative and exciting medium-large scale developments across a variety of private and public sector buildings, often partnered with top tier architects and clients. The business have an extremely healthy existing and pipelined workload, comprising of new-build, refurb, Passivhaus, Enerphit and BIM jobs. This is an excellent opportunity to join a well-established brand, where candidate feedback in the market has been very positive, gaining access to stand-out projects, whilst receiving an industry leading benefits package. A very progressive, diverse and flexible workplace with a stunning modern office. Role Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems . Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc. Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc. Representing the organisation at meetings with clients and contractors. Site surveys, inspections and monitoring of site works. Report and technical note writing. Maintaining complete records and archives to company standards. Adherence to all quality, environmental and governance processes. Qualifications / Experience Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects. Chartered Engineer with CIBSE or IET or working towards this. . Good level of computer literacy in a range of digital tools such as CAD, Amtech, Relux, package, and Microsoft packages Experience working in a design consultancy and/or experience of working within a contractor design environment is essential. Have a detailed knowledge of appropriate technical standards. Benefits 28 days annual leave + public holidays Company car or cash allowance Up to 6% matched contributory pension plan Hybrid working Flexible working hours Life assurance scheme Discount scheme (including gym membership, mobile phones etc) Family friendly policies Employee assistance Professional Development Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.
Are you ready to shape the future of intelligent buildings and mission-critical environments? We're looking for a skilled Network/IT Design Engineer to join our dynamic team and lead the technical delivery of innovative ICT systems across high-profile projects. You will be able to: Define Scope & Interfaces : Lead the creation of Demarcation Documents, clearly outlining scope, OFCI, and system interfaces. Design Excellence : Deliver Technical Design to RIBA Stage 4, updating and refining existing designs to meet evolving client needs. ICT Systems Design : Produce detailed designs and specifications for: Structured cabling (backbone & horizontal) WiFi systems DCIM Access Control (ACS), Intrusion Detection (IDS), and Video Surveillance Systems (VSS) Cabinet and containment layouts, coordinated with engineering teams Stakeholder Collaboration : Work closely with clients and project teams to ensure designs align with requirements and expectations. Technical Documentation : Generate 2D AutoCAD drawings and 3D BIM models in collaboration with internal Revit teams. Tender Support : Develop comprehensive technical specifications and tender documentation for ICT systems and equipment. Systems Integration : Support coordination with Pearl/STACK for seamless IT operations and security systems integration. Company Overview Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Benefits Discretionary Annual profit related bonus (normally between 6% and 10%, based on company performance) Pension (5% minimum contribution from the employee and 7% employer contributions) Flexible working - 3 days in office / 2 days WFH Private Health Care 4x life assurance Payment protection scheme (75% of your salary paid for up to 3 years if in long term sickness absence) 25 days holiday (option to purchase 5 extra days through salary sacrifice) Excellent personal / professional development opportunities Ready to take the lead? Apply now and let's build something extraordinary together.
Sep 24, 2025
Full time
Are you ready to shape the future of intelligent buildings and mission-critical environments? We're looking for a skilled Network/IT Design Engineer to join our dynamic team and lead the technical delivery of innovative ICT systems across high-profile projects. You will be able to: Define Scope & Interfaces : Lead the creation of Demarcation Documents, clearly outlining scope, OFCI, and system interfaces. Design Excellence : Deliver Technical Design to RIBA Stage 4, updating and refining existing designs to meet evolving client needs. ICT Systems Design : Produce detailed designs and specifications for: Structured cabling (backbone & horizontal) WiFi systems DCIM Access Control (ACS), Intrusion Detection (IDS), and Video Surveillance Systems (VSS) Cabinet and containment layouts, coordinated with engineering teams Stakeholder Collaboration : Work closely with clients and project teams to ensure designs align with requirements and expectations. Technical Documentation : Generate 2D AutoCAD drawings and 3D BIM models in collaboration with internal Revit teams. Tender Support : Develop comprehensive technical specifications and tender documentation for ICT systems and equipment. Systems Integration : Support coordination with Pearl/STACK for seamless IT operations and security systems integration. Company Overview Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Benefits Discretionary Annual profit related bonus (normally between 6% and 10%, based on company performance) Pension (5% minimum contribution from the employee and 7% employer contributions) Flexible working - 3 days in office / 2 days WFH Private Health Care 4x life assurance Payment protection scheme (75% of your salary paid for up to 3 years if in long term sickness absence) 25 days holiday (option to purchase 5 extra days through salary sacrifice) Excellent personal / professional development opportunities Ready to take the lead? Apply now and let's build something extraordinary together.
