Senior Technologist The Role We are recruiting a Senior Technologist to join a growing technical team, working closely with customers, suppliers and internal departments to deliver against customer expectations and technical requirements. This is a key customer-facing role, supporting product integrity, quality and compliance while helping to drive efficiency and commercial success. You will act as the technical lead for assigned customers, managing specifications, supporting product launches and maintaining strong working relationships across the value chain. Key Responsibilities Act as the main technical contact for assigned customers Manage and maintain accurate, achievable customer and plant specifications Work closely with Technologists, NPD and operational teams to ensure compliance Lead and support pre-productions and new product launches Manage temporary specifications and specification changes Investigate, report and drive improvements around customer complaints Support shelf-life trials and continuous improvement initiatives Maintain customer technical systems and documentation Support internal and external audit readiness where required Build strong relationships with customers, suppliers and internal stakeholders About You Experience in a Technologist or Senior Technologist role Strong attention to detail and document management skills Confident working directly with customers and presenting technical information Good knowledge of HACCP, food safety and technical standards Organised, proactive and comfortable working cross-functionally Experience supporting or mentoring junior team members Additional Information Reports into the Technical Development Manager Some flexibility required to support business and customer needs Commitment to health, safety and positive working practices Values & Behaviours You will demonstrate the business's core values through teamwork, clear communication, continuous improvement and a proactive, problem-solving mindset. Interested For further information, please get in touch with Oskar Ballard at MorePeople on (phone number removed) or email (url removed).
May 07, 2026
Full time
Senior Technologist The Role We are recruiting a Senior Technologist to join a growing technical team, working closely with customers, suppliers and internal departments to deliver against customer expectations and technical requirements. This is a key customer-facing role, supporting product integrity, quality and compliance while helping to drive efficiency and commercial success. You will act as the technical lead for assigned customers, managing specifications, supporting product launches and maintaining strong working relationships across the value chain. Key Responsibilities Act as the main technical contact for assigned customers Manage and maintain accurate, achievable customer and plant specifications Work closely with Technologists, NPD and operational teams to ensure compliance Lead and support pre-productions and new product launches Manage temporary specifications and specification changes Investigate, report and drive improvements around customer complaints Support shelf-life trials and continuous improvement initiatives Maintain customer technical systems and documentation Support internal and external audit readiness where required Build strong relationships with customers, suppliers and internal stakeholders About You Experience in a Technologist or Senior Technologist role Strong attention to detail and document management skills Confident working directly with customers and presenting technical information Good knowledge of HACCP, food safety and technical standards Organised, proactive and comfortable working cross-functionally Experience supporting or mentoring junior team members Additional Information Reports into the Technical Development Manager Some flexibility required to support business and customer needs Commitment to health, safety and positive working practices Values & Behaviours You will demonstrate the business's core values through teamwork, clear communication, continuous improvement and a proactive, problem-solving mindset. Interested For further information, please get in touch with Oskar Ballard at MorePeople on (phone number removed) or email (url removed).
Are you ready to take your engineering career to new heights? This is an incredible opportunity to join a forward-thinking company as a Senior Design Engineer, where you'll play a pivotal role in shaping cutting-edge engineered solutions. With a focus on innovation, technical excellence, and collaboration, this role offers the chance to work on exciting projects that truly make a difference. If you're looking for a dynamic environment that values your expertise and fosters professional growth, this role could be your next big move. What You Will Do: - Lead the design and development of engineered, fabricated components and products using advanced CAD tools. - Produce detailed engineering drawings, specifications, and bills of materials to support manufacturing. - Ensure designs comply with relevant standards, while meeting specific project requirements. - Conduct structural calculations and performance analyses to ensure product durability and long-term reliability. - Manage multiple design projects from concept to production release, collaborating with project managers and manufacturing teams. - Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and knowledge sharing. What You Will Bring: - A degree in Mechanical Engineering, Structural Engineering, Product Design, or a related discipline. - Extensive experience in mechanical or structural design, ideally within steel fabrication, or construction-related manufacturing. - Proficiency in advanced CAD software such as SolidWorks, Inventor, or AutoCAD. - Strong understanding of structural principles, material selection, and manufacturing processes like welding and assembly. - A proactive and solutions-focused mindset with excellent problem-solving and communication skills. In this role, you'll be instrumental in driving innovation and ensuring the delivery of high-quality engineering solutions. The company is dedicated to producing reliable, durable, and industry-leading products that meet and exceed rigorous security standards. Your expertise as a Senior Design Engineer will directly contribute to the development of advanced engineered solutions. This is your chance to work with a team that values technical excellence and continuous improvement. Location: The role is based in Stoke-on-Trent, a location that combines excellent transport links with a rich industrial heritage. Interested?: If you're ready to make your mark as a Senior Design Engineer, don't miss this opportunity to join a company that values your skills and ambitions. Apply now to take the next step in your career! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
May 07, 2026
Full time
Are you ready to take your engineering career to new heights? This is an incredible opportunity to join a forward-thinking company as a Senior Design Engineer, where you'll play a pivotal role in shaping cutting-edge engineered solutions. With a focus on innovation, technical excellence, and collaboration, this role offers the chance to work on exciting projects that truly make a difference. If you're looking for a dynamic environment that values your expertise and fosters professional growth, this role could be your next big move. What You Will Do: - Lead the design and development of engineered, fabricated components and products using advanced CAD tools. - Produce detailed engineering drawings, specifications, and bills of materials to support manufacturing. - Ensure designs comply with relevant standards, while meeting specific project requirements. - Conduct structural calculations and performance analyses to ensure product durability and long-term reliability. - Manage multiple design projects from concept to production release, collaborating with project managers and manufacturing teams. - Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and knowledge sharing. What You Will Bring: - A degree in Mechanical Engineering, Structural Engineering, Product Design, or a related discipline. - Extensive experience in mechanical or structural design, ideally within steel fabrication, or construction-related manufacturing. - Proficiency in advanced CAD software such as SolidWorks, Inventor, or AutoCAD. - Strong understanding of structural principles, material selection, and manufacturing processes like welding and assembly. - A proactive and solutions-focused mindset with excellent problem-solving and communication skills. In this role, you'll be instrumental in driving innovation and ensuring the delivery of high-quality engineering solutions. The company is dedicated to producing reliable, durable, and industry-leading products that meet and exceed rigorous security standards. Your expertise as a Senior Design Engineer will directly contribute to the development of advanced engineered solutions. This is your chance to work with a team that values technical excellence and continuous improvement. Location: The role is based in Stoke-on-Trent, a location that combines excellent transport links with a rich industrial heritage. Interested?: If you're ready to make your mark as a Senior Design Engineer, don't miss this opportunity to join a company that values your skills and ambitions. Apply now to take the next step in your career! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Be part of something extraordinary at Epilepsy Society. We are seeking a values driven Policy & Public Affairs Manager to join a charity that provides world leading support for people with epilepsy through Care, Research and Advocacy. About the role Epilepsy Society is a dynamic charity with ambitious plans to revolutionise the lives of people through advocacy, research and care. We are looking for someone to join our award-winning campaigns team and help us to progress change through political engagement at both national and local level. We have an impressive track record of working with government, locally elected politicians, professional organisations, patient stakeholder groups and other charities in the sector on a range of issues which affect people with epilepsy. Our recent work includes our successful Zach s Law campaign. This role is an exciting opportunity to help bring about further change that will make a real difference to the lives of people with epilepsy. The postholder will develop an effective programme of policy and public affairs work across the UK to have maximum impact for people with epilepsy and to raise the public profile of epilepsy. We seek someone with a degree or relevant experience in political or public affairs, extensive experience of influencing, organising campaigns and major events and negotiating at a senior level. You will be required to have a detailed level of understanding of government politics and the charity sector and an empathy to the cause. Please download the recruitment pack attached to view the full job description and essential criteria. The post holders should demonstrate our people values of CAIRO (Caring, Accountable, Improving, Respectful and Open. Some information about us The Epilepsy Society s Vision is a full life for everyone affected by epilepsy. We want everyone affected by epilepsy to have the best opportunity for a full life - as free from seizures as possible. We set out to make a difference to every person affected by epilepsy whatever their background, however seriously it impacts on their life, and whether they have the condition themselves or are close to someone with epilepsy. What we can offer • 27 days annual leave + bank holidays, with the ability to buy and sell annual leave • A generous Employee Referral Scheme (refer a friend and earn up to £150) • Length of service awards • Access to shopping discounts and cashback with thousands of retailers through Purple Rewards • Staff recognition scheme • Excellent training and development opportunities • Group Pension • Life Assurance (2x your annual salary) • Confidential, supportive Employee Assistance Programme, accessible 24/7 • Salary Finance, offering you products linked to your salary and tailored to your individual circumstances. Providing services such as loans, advances, savings and financial education If you have the right skills and experience and are inspired to apply, please do so by uploading your CV and covering letter explaining how you meet the specifications of this role. A DBS (Disclosure & Barring) check will be required before appointment is confirmed. We reserve the right to close the post early once we have received a sufficient number of applicants: please submit your application as soon as possible to avoid disappointment.
May 06, 2026
Full time
Be part of something extraordinary at Epilepsy Society. We are seeking a values driven Policy & Public Affairs Manager to join a charity that provides world leading support for people with epilepsy through Care, Research and Advocacy. About the role Epilepsy Society is a dynamic charity with ambitious plans to revolutionise the lives of people through advocacy, research and care. We are looking for someone to join our award-winning campaigns team and help us to progress change through political engagement at both national and local level. We have an impressive track record of working with government, locally elected politicians, professional organisations, patient stakeholder groups and other charities in the sector on a range of issues which affect people with epilepsy. Our recent work includes our successful Zach s Law campaign. This role is an exciting opportunity to help bring about further change that will make a real difference to the lives of people with epilepsy. The postholder will develop an effective programme of policy and public affairs work across the UK to have maximum impact for people with epilepsy and to raise the public profile of epilepsy. We seek someone with a degree or relevant experience in political or public affairs, extensive experience of influencing, organising campaigns and major events and negotiating at a senior level. You will be required to have a detailed level of understanding of government politics and the charity sector and an empathy to the cause. Please download the recruitment pack attached to view the full job description and essential criteria. The post holders should demonstrate our people values of CAIRO (Caring, Accountable, Improving, Respectful and Open. Some information about us The Epilepsy Society s Vision is a full life for everyone affected by epilepsy. We want everyone affected by epilepsy to have the best opportunity for a full life - as free from seizures as possible. We set out to make a difference to every person affected by epilepsy whatever their background, however seriously it impacts on their life, and whether they have the condition themselves or are close to someone with epilepsy. What we can offer • 27 days annual leave + bank holidays, with the ability to buy and sell annual leave • A generous Employee Referral Scheme (refer a friend and earn up to £150) • Length of service awards • Access to shopping discounts and cashback with thousands of retailers through Purple Rewards • Staff recognition scheme • Excellent training and development opportunities • Group Pension • Life Assurance (2x your annual salary) • Confidential, supportive Employee Assistance Programme, accessible 24/7 • Salary Finance, offering you products linked to your salary and tailored to your individual circumstances. Providing services such as loans, advances, savings and financial education If you have the right skills and experience and are inspired to apply, please do so by uploading your CV and covering letter explaining how you meet the specifications of this role. A DBS (Disclosure & Barring) check will be required before appointment is confirmed. We reserve the right to close the post early once we have received a sufficient number of applicants: please submit your application as soon as possible to avoid disappointment.
We are seeking an experienced and dedicated Ground Mount Large Scale Solar PV Installation Site Manager to oversee the successful installation of our solar PV projects. The ideal candidate will have a minimum of 5 years of solar experience and be able to adapt to our range of services from 200kWp up to 60MWp. The candidate must also have a thorough understanding of the Construction (Design and Management) Regulations 2015, and a strong ability to manage company quality systems and supervise contractors. The role requires excellent documentation skills, adherence to Health and Safety standards, and a commitment to delivering projects on time. Site Management Initial site set up of welfare areas, quality systems and plans Oversee and manage the day to day, on-site installation of Solar PV systems, ensuring alignment with project plans designs and specifications. Ensure the Construction Design Management Regulations are enforced and adhered to Coordinate with project managers, engineers, contractors, and suppliers to ensure smooth project execution. Monitor project progress and provide regular updates to stakeholders. Manage site logistics and deliveries of equipment Be a good communicator and ensure the Greenvolt Management team are appraised of progress and any potential issues at site. Quality and Compliance Ensure adherence to company quality systems and processes. Conduct regular site inspections to ensure compliance with safety, design specifications and quality standards. Ensure all work is carried out in accordance with the CDM Regulations 2015 and other relevant regulations. Health and Safety Promote and maintain a positive Health and Safety culture on site. Ensure all site activities comply with Health and Safety regulations and company policies. Hold responsibility for first aid and fire warden duties on site. Contractor Supervision Supervise and coordinate the activities of subcontractors and site personnel. Conduct regular meetings with contractors to monitor progress and resolve any issues. Ensure all site personnel are fully briefed on project requirements and safety procedures. Documentation and Reporting Maintain accurate and up-to-date project documentation and records. Complete and submit all required paperwork, including progress reports, risk assessments, and method statements. Provide regular updates to senior management on project status and any potential issues. Stakeholder Management Have excellent communication skills Liaise with clients, suppliers, and other stakeholders to ensure smooth project delivery as required. Address any client concerns or queries promptly and professionally Foster strong working relationships with all project stakeholders Qualifications Minimum of 5 years of experience in solar PV installation, with a focus on large-scale ground and roof mount projects. In-depth understanding of the CDM Regulations 2015. Proven ability to manage quality systems and ensure compliance with industry standards. Experience in supervising contractors and managing site personnel. Strong documentation and reporting skills. SMSTS (Site Management Safety Training Scheme) certification. First Aid and Fire Warden training. Excellent knowledge of Health and Safety regulations and best practices. Strong organizational and problem-solving skills. Excellent communication and interpersonal skills. Personal Attributes Proactive and driven with a strong commitment to delivering high-quality projects. Detail-oriented with a focus on ensuring compliance and safety. Able to work under pressure and meet tight deadlines. Strong leadership skills with the ability to motivate and manage a team Please note that nationwide travel is required for this role. Additional Benefits after successful completion of probation Health Insurance Company Pension Death in Service Income Protection Professional Membership fees Training and CPD This job description is intended as a general guideline and is not exhaustive; it is a flexible document and may be subject to change to meet the evolving needs of the company. We are an Equal Opportunity Employer and give consideration for employment to qualified applicants without regard to gender, religion, race, national or ethnic origin, cultural background, social group, disability, sexual orientation, gender identity, marital status, age or political opinion. Diversity is fundamental to our culture and we invite you to be part of this diversity! Note this role is based in Ireland and you must be based in Ireland to complete the tasks of this role We want an energy transition for everyone from everyone. Please note: We do not require assistance from recruitment agencies and will not be accepting unsolicited agency submissions for this vacancy.
May 06, 2026
Full time
We are seeking an experienced and dedicated Ground Mount Large Scale Solar PV Installation Site Manager to oversee the successful installation of our solar PV projects. The ideal candidate will have a minimum of 5 years of solar experience and be able to adapt to our range of services from 200kWp up to 60MWp. The candidate must also have a thorough understanding of the Construction (Design and Management) Regulations 2015, and a strong ability to manage company quality systems and supervise contractors. The role requires excellent documentation skills, adherence to Health and Safety standards, and a commitment to delivering projects on time. Site Management Initial site set up of welfare areas, quality systems and plans Oversee and manage the day to day, on-site installation of Solar PV systems, ensuring alignment with project plans designs and specifications. Ensure the Construction Design Management Regulations are enforced and adhered to Coordinate with project managers, engineers, contractors, and suppliers to ensure smooth project execution. Monitor project progress and provide regular updates to stakeholders. Manage site logistics and deliveries of equipment Be a good communicator and ensure the Greenvolt Management team are appraised of progress and any potential issues at site. Quality and Compliance Ensure adherence to company quality systems and processes. Conduct regular site inspections to ensure compliance with safety, design specifications and quality standards. Ensure all work is carried out in accordance with the CDM Regulations 2015 and other relevant regulations. Health and Safety Promote and maintain a positive Health and Safety culture on site. Ensure all site activities comply with Health and Safety regulations and company policies. Hold responsibility for first aid and fire warden duties on site. Contractor Supervision Supervise and coordinate the activities of subcontractors and site personnel. Conduct regular meetings with contractors to monitor progress and resolve any issues. Ensure all site personnel are fully briefed on project requirements and safety procedures. Documentation and Reporting Maintain accurate and up-to-date project documentation and records. Complete and submit all required paperwork, including progress reports, risk assessments, and method statements. Provide regular updates to senior management on project status and any potential issues. Stakeholder Management Have excellent communication skills Liaise with clients, suppliers, and other stakeholders to ensure smooth project delivery as required. Address any client concerns or queries promptly and professionally Foster strong working relationships with all project stakeholders Qualifications Minimum of 5 years of experience in solar PV installation, with a focus on large-scale ground and roof mount projects. In-depth understanding of the CDM Regulations 2015. Proven ability to manage quality systems and ensure compliance with industry standards. Experience in supervising contractors and managing site personnel. Strong documentation and reporting skills. SMSTS (Site Management Safety Training Scheme) certification. First Aid and Fire Warden training. Excellent knowledge of Health and Safety regulations and best practices. Strong organizational and problem-solving skills. Excellent communication and interpersonal skills. Personal Attributes Proactive and driven with a strong commitment to delivering high-quality projects. Detail-oriented with a focus on ensuring compliance and safety. Able to work under pressure and meet tight deadlines. Strong leadership skills with the ability to motivate and manage a team Please note that nationwide travel is required for this role. Additional Benefits after successful completion of probation Health Insurance Company Pension Death in Service Income Protection Professional Membership fees Training and CPD This job description is intended as a general guideline and is not exhaustive; it is a flexible document and may be subject to change to meet the evolving needs of the company. We are an Equal Opportunity Employer and give consideration for employment to qualified applicants without regard to gender, religion, race, national or ethnic origin, cultural background, social group, disability, sexual orientation, gender identity, marital status, age or political opinion. Diversity is fundamental to our culture and we invite you to be part of this diversity! Note this role is based in Ireland and you must be based in Ireland to complete the tasks of this role We want an energy transition for everyone from everyone. Please note: We do not require assistance from recruitment agencies and will not be accepting unsolicited agency submissions for this vacancy.
The Interim Senior Procurement Manager will oversee procurement strategies and ensure compliance with organisational policies within the not-for-profit sector. This temporary role based in Warwickshire requires a focused professional to manage procurement processes effectively and drive value for money. Client Details This opportunity is with a well-established organisation within the not-for-profit sector. The organisation operates at a large scale, providing essential services and maintaining a strong commitment to excellence in its operations. Description Develop, implement and monitor top level category / capital project procurement strategies to achieve strict savings targets / budgets, timescales. Support achievement of Procurement Office KPIs and embed the category management framework across spend areas in excess of 10M p.a. Ensure procurement recommendations and continuous improvement initiatives support the organisation's strategic goals. Produce and present reports, options appraisals, business cases and KPIs analysis. Plan, lead and award complex procurement processes, contracts and framework agreements to achieve optimum savings, value for money and timescales. Comply with the organisation's financial regulations ensuring good governance across procurement activities in compliance with statutory obligations. Ensure funding conditions are met and procurement is conducted with full and compliant audit trails. Where required, comply with the Public Contracts Regulations. Support stakeholders in the development of complex and commercially optimum specifications for incorporation into market engagements and tender exercises. Review contracts and licence agreements as appropriate to identify and address risks. Procurement lead for complex, strategic negotiations to ensure commercially optimum contracts, mitigating financial and legal risk (for example total cost analysis, management of payment terms, import, currency, liability and IPR risks). Lead ongoing contract management to ensure benefits realisation, effective supplier performance management and exploit innovative opportunities from the supply chain. Designated Procurement link to one or more strategic departments, undertake procurement activity and provide expert advice to senior members of staff. Facilitate greater visibility of the procurement pipeline. Build effective collaborative relationships with departments, promote a responsive, agile and professional image of the Procurement Office. Profile A successful Interim Senior Procurement Manager should have: Broad range of experience including category management, tendering, specification development, whole life and total cost evaluation, contract negotiation, formation and management. Skilled in developing and implementing top level category or capital project strategies to strict budgets / savings targets, timescales and KPI frameworks. Skilled in fostering effective relationships across senior internal and external groups. Influencing skills, collaborative approach and strong ability to work as part of a team. Skilled negotiator, ability to plan and lead complex, strategic negotiations and adapt negotiation style. Good understanding of commercial and legal risk management, financial assessments and ratio analysis. Skilled in delivering robust, auditable and effective procurement processes. In depth knowledge and application of competitive, cradle to grave tendering approaches, specification development, total and whole life cost analysis, contract award and management. Knowledge and compliance with key regulatory requirements. Desirable: Working knowledge and experience of EU Procurement Directives / Public Contracts Regulations 2015 (as updated from time to time). Job Offer Competitive daily rate of 500 to 600 (Umbrella) Temporary position offering flexibility and a chance to make a significant impact. Opportunity to work within a respected not-for-profit organisation. Engage in meaningful work within a collaborative environment. Based in Warwickshire with accessible transport links. This is a fantastic opportunity for an experienced procurement professional to contribute to a valued organisation. If you meet the criteria and are ready for a new challenge, we encourage you to apply.
May 06, 2026
Contractor
The Interim Senior Procurement Manager will oversee procurement strategies and ensure compliance with organisational policies within the not-for-profit sector. This temporary role based in Warwickshire requires a focused professional to manage procurement processes effectively and drive value for money. Client Details This opportunity is with a well-established organisation within the not-for-profit sector. The organisation operates at a large scale, providing essential services and maintaining a strong commitment to excellence in its operations. Description Develop, implement and monitor top level category / capital project procurement strategies to achieve strict savings targets / budgets, timescales. Support achievement of Procurement Office KPIs and embed the category management framework across spend areas in excess of 10M p.a. Ensure procurement recommendations and continuous improvement initiatives support the organisation's strategic goals. Produce and present reports, options appraisals, business cases and KPIs analysis. Plan, lead and award complex procurement processes, contracts and framework agreements to achieve optimum savings, value for money and timescales. Comply with the organisation's financial regulations ensuring good governance across procurement activities in compliance with statutory obligations. Ensure funding conditions are met and procurement is conducted with full and compliant audit trails. Where required, comply with the Public Contracts Regulations. Support stakeholders in the development of complex and commercially optimum specifications for incorporation into market engagements and tender exercises. Review contracts and licence agreements as appropriate to identify and address risks. Procurement lead for complex, strategic negotiations to ensure commercially optimum contracts, mitigating financial and legal risk (for example total cost analysis, management of payment terms, import, currency, liability and IPR risks). Lead ongoing contract management to ensure benefits realisation, effective supplier performance management and exploit innovative opportunities from the supply chain. Designated Procurement link to one or more strategic departments, undertake procurement activity and provide expert advice to senior members of staff. Facilitate greater visibility of the procurement pipeline. Build effective collaborative relationships with departments, promote a responsive, agile and professional image of the Procurement Office. Profile A successful Interim Senior Procurement Manager should have: Broad range of experience including category management, tendering, specification development, whole life and total cost evaluation, contract negotiation, formation and management. Skilled in developing and implementing top level category or capital project strategies to strict budgets / savings targets, timescales and KPI frameworks. Skilled in fostering effective relationships across senior internal and external groups. Influencing skills, collaborative approach and strong ability to work as part of a team. Skilled negotiator, ability to plan and lead complex, strategic negotiations and adapt negotiation style. Good understanding of commercial and legal risk management, financial assessments and ratio analysis. Skilled in delivering robust, auditable and effective procurement processes. In depth knowledge and application of competitive, cradle to grave tendering approaches, specification development, total and whole life cost analysis, contract award and management. Knowledge and compliance with key regulatory requirements. Desirable: Working knowledge and experience of EU Procurement Directives / Public Contracts Regulations 2015 (as updated from time to time). Job Offer Competitive daily rate of 500 to 600 (Umbrella) Temporary position offering flexibility and a chance to make a significant impact. Opportunity to work within a respected not-for-profit organisation. Engage in meaningful work within a collaborative environment. Based in Warwickshire with accessible transport links. This is a fantastic opportunity for an experienced procurement professional to contribute to a valued organisation. If you meet the criteria and are ready for a new challenge, we encourage you to apply.
Contact Paul McCay Junior AutoCAD Technician - Maghera - Permanent An excellent opportunity has arisen for a Junior AutoCAD Technician to join a well-established structural steel manufacturer and designer based in Maghera . Due to continued business growth, this role offers the chance to support an experienced design team while developing your technical skills within a specialist engineering environment. This position is ideal for someone with a strong interest in technical drawing, engineering, and steel fabrication, who is eager to build a long-term career in the industry. You will work closely with senior designers and project teams, gaining hands-on experience across a range of structural steel projects. The Role: c£35,000 per annum Monday to Thursday: 7:30 am - 5:00 pm Fridays 7:30am - 2:00pm Permanent opportunity Company pension scheme Key Responsibilities: Produce accurate AutoCAD drawings for structural steel projects Support senior designers and project managers with day-to-day design tasks Assist with design revisions, measurements, and fabrication details Ensure all drawings meet required standards and specifications Criteria: Basic AutoCAD experience (education or industry) Strong attention to detail and accuracy Eagerness to learn and develop within a technical role Good communication skills and ability to work as part of a team This is a fantastic opportunity to join a growing company where you can develop your skills, gain valuable industry experience, and progress your career in structural design. If this sounds like the next step in your career, we'd love to hear from you! Even if you don't meet every listed requirement, we encourage you to apply - we may have other suitable roles for you. Apply online, email or call Paul on to find out more. Riada Resourcing is an equal opportunities employer.
May 06, 2026
Full time
Contact Paul McCay Junior AutoCAD Technician - Maghera - Permanent An excellent opportunity has arisen for a Junior AutoCAD Technician to join a well-established structural steel manufacturer and designer based in Maghera . Due to continued business growth, this role offers the chance to support an experienced design team while developing your technical skills within a specialist engineering environment. This position is ideal for someone with a strong interest in technical drawing, engineering, and steel fabrication, who is eager to build a long-term career in the industry. You will work closely with senior designers and project teams, gaining hands-on experience across a range of structural steel projects. The Role: c£35,000 per annum Monday to Thursday: 7:30 am - 5:00 pm Fridays 7:30am - 2:00pm Permanent opportunity Company pension scheme Key Responsibilities: Produce accurate AutoCAD drawings for structural steel projects Support senior designers and project managers with day-to-day design tasks Assist with design revisions, measurements, and fabrication details Ensure all drawings meet required standards and specifications Criteria: Basic AutoCAD experience (education or industry) Strong attention to detail and accuracy Eagerness to learn and develop within a technical role Good communication skills and ability to work as part of a team This is a fantastic opportunity to join a growing company where you can develop your skills, gain valuable industry experience, and progress your career in structural design. If this sounds like the next step in your career, we'd love to hear from you! Even if you don't meet every listed requirement, we encourage you to apply - we may have other suitable roles for you. Apply online, email or call Paul on to find out more. Riada Resourcing is an equal opportunities employer.
Our client, a leading name in the procurement supply chain sector, is seeking a Senior Buyer to join their team based in either Harefield or Ipswich. This permanent position sits within their Energy Supply Chain team, supporting major substation and energy infrastructure projects. You will play a vital role in the procurement of critical, high-value, long-lead materials, working closely with operational teams, suppliers, and stakeholders to ensure projects are delivered safely, on time, and to best value. This is a highly collaborative role with the opportunity to shape procurement strategy within a growing and forward-thinking business. Key Responsibilities: Supporting Energy Major Projects with the procurement of critical materials and services Engaging early with estimating and work-winning teams to support pricing and procurement strategy Developing and delivering procurement strategies aligned to project and wider group objectives Managing supplier relationships, including negotiation, performance monitoring, and KPI management Identifying and working with key strategic suppliers and subcontractors, both UK and international Ensuring compliance with client frameworks, technical specifications, and regulatory requirements Monitoring cost performance against tender allowances and project programmes Providing technical procurement support to contract teams, including specifications, COSHH and H&S documentation Supporting category management activities and wider group procurement initiatives Job Requirements: Proven experience operating at Senior Buyer or Procurement Manager level within the energy, utilities, M&E, or civil engineering sectors CIPS qualified (or working towards) is preferable Excellent stakeholder management and negotiation skills with sound knowledge of contract law, supply markets, and pricing trends Strong analytical, research, and problem-solving skills Confident communicator with strong written and verbal skills Advanced IT skills and attention to detail Full UK driving licence is essential, as there will be significant travel within the UK, mostly between Harefield, Ipswich, and Gwent Benefits: Opportunity to influence and shape procurement strategy within major projects Highly collaborative environment within a growing and forward-thinking business Professional development and training opportunities Competitive employee benefits package Dynamic and supportive work environment If you are an experienced Senior Buyer looking to make a significant impact in a dynamic and growing company, we would love to hear from you. Apply now to join our client's talented team in either Harefield or Ipswich.
May 06, 2026
Full time
Our client, a leading name in the procurement supply chain sector, is seeking a Senior Buyer to join their team based in either Harefield or Ipswich. This permanent position sits within their Energy Supply Chain team, supporting major substation and energy infrastructure projects. You will play a vital role in the procurement of critical, high-value, long-lead materials, working closely with operational teams, suppliers, and stakeholders to ensure projects are delivered safely, on time, and to best value. This is a highly collaborative role with the opportunity to shape procurement strategy within a growing and forward-thinking business. Key Responsibilities: Supporting Energy Major Projects with the procurement of critical materials and services Engaging early with estimating and work-winning teams to support pricing and procurement strategy Developing and delivering procurement strategies aligned to project and wider group objectives Managing supplier relationships, including negotiation, performance monitoring, and KPI management Identifying and working with key strategic suppliers and subcontractors, both UK and international Ensuring compliance with client frameworks, technical specifications, and regulatory requirements Monitoring cost performance against tender allowances and project programmes Providing technical procurement support to contract teams, including specifications, COSHH and H&S documentation Supporting category management activities and wider group procurement initiatives Job Requirements: Proven experience operating at Senior Buyer or Procurement Manager level within the energy, utilities, M&E, or civil engineering sectors CIPS qualified (or working towards) is preferable Excellent stakeholder management and negotiation skills with sound knowledge of contract law, supply markets, and pricing trends Strong analytical, research, and problem-solving skills Confident communicator with strong written and verbal skills Advanced IT skills and attention to detail Full UK driving licence is essential, as there will be significant travel within the UK, mostly between Harefield, Ipswich, and Gwent Benefits: Opportunity to influence and shape procurement strategy within major projects Highly collaborative environment within a growing and forward-thinking business Professional development and training opportunities Competitive employee benefits package Dynamic and supportive work environment If you are an experienced Senior Buyer looking to make a significant impact in a dynamic and growing company, we would love to hear from you. Apply now to join our client's talented team in either Harefield or Ipswich.
Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Do you have an understanding of MRP Systems? Do you have experience in New Product Introduction (NPI)? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes including Machining and Mechanical Assembly Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing, and material handling Providing Basis of Estimates for engineering activities and shop floor operations Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Close liaison of activities with Industrial Engineering, Production Engineering, and other functions Support with the business process reviews and generation/update of relevant documentation Your skillset may include: Good working knowledge of complex assemblies New Product Introduction (NPI) experience Knowledge of Lean Manufacturing, Six Sigma, and quality improvement tools Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems Experience managing BOMs and routings in SAP (or similar ERP systems) Facility layout experience If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
May 06, 2026
Full time
Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Do you have an understanding of MRP Systems? Do you have experience in New Product Introduction (NPI)? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes including Machining and Mechanical Assembly Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing, and material handling Providing Basis of Estimates for engineering activities and shop floor operations Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Close liaison of activities with Industrial Engineering, Production Engineering, and other functions Support with the business process reviews and generation/update of relevant documentation Your skillset may include: Good working knowledge of complex assemblies New Product Introduction (NPI) experience Knowledge of Lean Manufacturing, Six Sigma, and quality improvement tools Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems Experience managing BOMs and routings in SAP (or similar ERP systems) Facility layout experience If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Supplier Quality Engineer 6 month contract Based in Stevenage - hybrid Offering 45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification/inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organised records of all quality control activities Communicate findings to relevant departments/stakeholders Work cross-functionally to implement root cause corrective actions at supplier Contribute to continuous improvement initiatives to enhance the quality of our products Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: Trained auditor to AS9100 Experienced in conducting Quality Audits & surveillance Quality experience within Mechanical, Manufacturing or Electronic Engineering Proven track record in Quality, Supply Chain or Manufacturing Defence, automotive, or aerospace industry experience Familiar with GD&T and able to use a variety of metrology equipment QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.) Knowledge of the product lifecycle management Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Stevenage - hybrid Offering 45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 06, 2026
Contractor
Supplier Quality Engineer 6 month contract Based in Stevenage - hybrid Offering 45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification/inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organised records of all quality control activities Communicate findings to relevant departments/stakeholders Work cross-functionally to implement root cause corrective actions at supplier Contribute to continuous improvement initiatives to enhance the quality of our products Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: Trained auditor to AS9100 Experienced in conducting Quality Audits & surveillance Quality experience within Mechanical, Manufacturing or Electronic Engineering Proven track record in Quality, Supply Chain or Manufacturing Defence, automotive, or aerospace industry experience Familiar with GD&T and able to use a variety of metrology equipment QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.) Knowledge of the product lifecycle management Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Stevenage - hybrid Offering 45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
May 06, 2026
Full time
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa 50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Commissioning Manager The client are a leading enterprise level life safety and security integrator working on large scale project throughout the UK & Europe The Role This role will oversee the commissioning of Life Safety, Fire Detection, Fire Suppression, Sprinkler, Security, and Data Infrastructure systems specifically within large-scale Industrial, Commercial, Residential and Data Centre environments. The Commissioning Manager will provide technical leadership, challenge design information, manage multidiscipline commissioning teams, and ensure all systems are integrated, validated, and handed over in accordance with all standards, legislation, project specific standards and client timescales. Duties and Responsibilities Planning & Coordination Develop detailed commissioning plans, programmes, procedures, and schedules for ELV systems (Life Safety, CCTV, Access Control, Intercom, etc). Review design drawings, specifications, and scope documents to identify commissioning requirements. Coordinate with design teams, project managers, subcontractors, and vendors to ensure readiness for commissioning. Conduct commissioning meetings and prepare progress reports for management and clients. Review resource requirements and skill set for each project/system and ensure they are in place as per the commissioning plan/programme Plan across multiple projects to ensure commissioning plans/programme/resources are in place and that one project doesn't fail due to another project over-running. Coordinate and manage integration workshops between life safety systems, security systems, sprinklers, fire suppression and data systems Commissioning Execution Ensure the project commissioning plan is in place and lead and supervise commissioning engineers on site in conjunction with the project site team Carry out weekly checks with commissioning engineers to ensure programme being adhered to and monitor progress/resource issues Oversee programming, system configuration, and integration between multiple ELV systems (e.g., linking fire alarm with access control or BMS) Ensure all issues identified during testing are logged, rectified, and reverified before system handover Implement and manage commissioning gateways, punch list management, and closure Quality Assurance & Compliance Verify compliance with Specifications, BAFE, BS, EN, and GBEC Policies and procedures Support standardization of commissioning processes across multiple sites Coordinate third-party testing, inspections, and approvals with relevant agencies or consultants Maintain QA/QC documentation, including checklists, test reports, and witness sheets Ensure commissioning activities follow safety and quality management procedures Review and validate commissioning scripts, method statements, and integrated test plans Documentation & Handover Prepare and maintain complete commissioning documentation, including test sheets, commissioning logs, and defect reports Manage and support the preparation of as-built drawings, O&M manuals, and training sessions for client representatives Oversee final acceptance testing (FAT), site acceptance testing (SAT), and system handover to the client Ensure all commissioning evidence is captured through approved digital platforms (e.g., Dalux, BIM360, Cx software, ATP) Leadership & Team Management Lead, mentor, and train commissioning teams and engineers Demonstrate a key focus in driving force to deliver project close outs Communicate risks early, escalate blockers, and drive issue resolution to protect milestones Support end-user training and handover of fully validated systems Ensure coordination with other trades (mechanical, electrical, BMS, lifts, etc) to ensure smooth integration Provide technical support and troubleshooting throughout project execution Working Conditions Primarily site-based role with travel between multiple project locations May involve extended working hours to meet project deadlines Must comply with all site safety and company policies Person Specification Skills & Competencies Minimum 5+ years senior commissioning experience on large commercial or Data Centre projects Deep understanding of ELV and life safety systems architecture and integration Presenting & demonstrating commission delivery position to senior management teams Strong leadership, planning, and team coordination skills Highly organized with strong urgency, attention to detail, and commitment to zero-defect execution Proficiency in commissioning tools, system diagnostic software, and network configuration Excellent communication and documentation abilities Analytical mindset with strong troubleshooting and problem-solving capabilities Ability to manage multiple projects and meet deadlines under pressure Essential Hold CSCS Card and SMSTS Safety Trained Experience in working on and commissioning Fire Detection, Voice Alarm, Disabled Systems, Access Control, CCTV, Intruder systems to the applicable British, European and NACOSS Standards and knowledge of all relevant BAFE/BRE codes of practice To be conversant with and up to date in respect of new technologies and regulatory standards that are relevant to the design process Minimum of 5+ Years Experience Commissioning Medium/Large Projects Plan and monitor work to tight time scales and deadlines Multitask across multiple projects Good verbal and written communication skills, including the ability to prepare reports Work creatively and innovatively dealing with core issues with customers Form good working relationships with colleagues, customers and stakeholders Strong understanding of redundancy philosophy, fire strategies for data halls, and operational uptime commissioning procedures Experience managing multi-discipline commissioning teams and running commissioning meetings/workshops Influence, persuade and negotiate effectively Understand and disseminate specifications and technical drawings Display initiative and to have strong attention to detail Be highly motivated and orientated with a strong drive to deliver and succeed Have good organisational and time management skills Good presentation and customer facing skills PC Literate and Good understanding of Microsoft Products Desirable FIA/NACOSS Training (Advanced Installer & Advanced Commissioner) First Aid Training System Knowledge / Experience: Fire Alarms - Gent/WINMAG/DRAX/Advanced/Siemens/FAAST/Xtralis/ Apollo PAVA - Honeywell/Baldwin Boxall Disabled Systems - Baldwin Boxall/C-TEC Security System - Milestone/Xplan/CCure/AMAG/Lenel/Hikvision/Axis/ Galaxy/Comelit/Commend Previous experience of working within Fire, Security or Data Infrastructure industry M&E Co-ordination experience For more information on this role please call Giles - Director -
May 06, 2026
Full time
Commissioning Manager The client are a leading enterprise level life safety and security integrator working on large scale project throughout the UK & Europe The Role This role will oversee the commissioning of Life Safety, Fire Detection, Fire Suppression, Sprinkler, Security, and Data Infrastructure systems specifically within large-scale Industrial, Commercial, Residential and Data Centre environments. The Commissioning Manager will provide technical leadership, challenge design information, manage multidiscipline commissioning teams, and ensure all systems are integrated, validated, and handed over in accordance with all standards, legislation, project specific standards and client timescales. Duties and Responsibilities Planning & Coordination Develop detailed commissioning plans, programmes, procedures, and schedules for ELV systems (Life Safety, CCTV, Access Control, Intercom, etc). Review design drawings, specifications, and scope documents to identify commissioning requirements. Coordinate with design teams, project managers, subcontractors, and vendors to ensure readiness for commissioning. Conduct commissioning meetings and prepare progress reports for management and clients. Review resource requirements and skill set for each project/system and ensure they are in place as per the commissioning plan/programme Plan across multiple projects to ensure commissioning plans/programme/resources are in place and that one project doesn't fail due to another project over-running. Coordinate and manage integration workshops between life safety systems, security systems, sprinklers, fire suppression and data systems Commissioning Execution Ensure the project commissioning plan is in place and lead and supervise commissioning engineers on site in conjunction with the project site team Carry out weekly checks with commissioning engineers to ensure programme being adhered to and monitor progress/resource issues Oversee programming, system configuration, and integration between multiple ELV systems (e.g., linking fire alarm with access control or BMS) Ensure all issues identified during testing are logged, rectified, and reverified before system handover Implement and manage commissioning gateways, punch list management, and closure Quality Assurance & Compliance Verify compliance with Specifications, BAFE, BS, EN, and GBEC Policies and procedures Support standardization of commissioning processes across multiple sites Coordinate third-party testing, inspections, and approvals with relevant agencies or consultants Maintain QA/QC documentation, including checklists, test reports, and witness sheets Ensure commissioning activities follow safety and quality management procedures Review and validate commissioning scripts, method statements, and integrated test plans Documentation & Handover Prepare and maintain complete commissioning documentation, including test sheets, commissioning logs, and defect reports Manage and support the preparation of as-built drawings, O&M manuals, and training sessions for client representatives Oversee final acceptance testing (FAT), site acceptance testing (SAT), and system handover to the client Ensure all commissioning evidence is captured through approved digital platforms (e.g., Dalux, BIM360, Cx software, ATP) Leadership & Team Management Lead, mentor, and train commissioning teams and engineers Demonstrate a key focus in driving force to deliver project close outs Communicate risks early, escalate blockers, and drive issue resolution to protect milestones Support end-user training and handover of fully validated systems Ensure coordination with other trades (mechanical, electrical, BMS, lifts, etc) to ensure smooth integration Provide technical support and troubleshooting throughout project execution Working Conditions Primarily site-based role with travel between multiple project locations May involve extended working hours to meet project deadlines Must comply with all site safety and company policies Person Specification Skills & Competencies Minimum 5+ years senior commissioning experience on large commercial or Data Centre projects Deep understanding of ELV and life safety systems architecture and integration Presenting & demonstrating commission delivery position to senior management teams Strong leadership, planning, and team coordination skills Highly organized with strong urgency, attention to detail, and commitment to zero-defect execution Proficiency in commissioning tools, system diagnostic software, and network configuration Excellent communication and documentation abilities Analytical mindset with strong troubleshooting and problem-solving capabilities Ability to manage multiple projects and meet deadlines under pressure Essential Hold CSCS Card and SMSTS Safety Trained Experience in working on and commissioning Fire Detection, Voice Alarm, Disabled Systems, Access Control, CCTV, Intruder systems to the applicable British, European and NACOSS Standards and knowledge of all relevant BAFE/BRE codes of practice To be conversant with and up to date in respect of new technologies and regulatory standards that are relevant to the design process Minimum of 5+ Years Experience Commissioning Medium/Large Projects Plan and monitor work to tight time scales and deadlines Multitask across multiple projects Good verbal and written communication skills, including the ability to prepare reports Work creatively and innovatively dealing with core issues with customers Form good working relationships with colleagues, customers and stakeholders Strong understanding of redundancy philosophy, fire strategies for data halls, and operational uptime commissioning procedures Experience managing multi-discipline commissioning teams and running commissioning meetings/workshops Influence, persuade and negotiate effectively Understand and disseminate specifications and technical drawings Display initiative and to have strong attention to detail Be highly motivated and orientated with a strong drive to deliver and succeed Have good organisational and time management skills Good presentation and customer facing skills PC Literate and Good understanding of Microsoft Products Desirable FIA/NACOSS Training (Advanced Installer & Advanced Commissioner) First Aid Training System Knowledge / Experience: Fire Alarms - Gent/WINMAG/DRAX/Advanced/Siemens/FAAST/Xtralis/ Apollo PAVA - Honeywell/Baldwin Boxall Disabled Systems - Baldwin Boxall/C-TEC Security System - Milestone/Xplan/CCure/AMAG/Lenel/Hikvision/Axis/ Galaxy/Comelit/Commend Previous experience of working within Fire, Security or Data Infrastructure industry M&E Co-ordination experience For more information on this role please call Giles - Director -
Critical Maritime Systems & Support Limited
Portsmouth, Hampshire
Description CMS2 is a specialist equipment manufacturer supplying maritime atmosphere control systems and support services. CMS2 are experts in enabling high availability atmosphere management systems to generate breathable air for submariners, allowing boats to remain underwater for long periods of time. We do this by combining over sixty years of expertise with the latest technology and processes to design, build and support high quality systems and solutions. We are looking for a Senior Project Engineer to join our multidisciplinary engineering team to support in the creation of novel engineering solutions to support new product introduction as well as developing improvements to the existing product line. Key Responsibilities Reporting to the Industrialisation Manager, you will manage any design improvement/obsolescence activities relating to the assigned projects, providing technical guidance in line with the Product Specification to the engineering resources assigned. Managing the flow of information between multiple departments. Responsible for implementing changes to maintain specifications & drawings. Responsible for creation and maintenance of Product Bills of Materials. Review the content of standard project documentation i.e. technical, operation, maintenance manuals. Report on the technical content of the project to the Project Managers. This includes supporting multi-departmental reviews to ensure the right approach is being followed, and that any requirements for additional expertise are addressed. Identify technical risks & provide support to the Project Managers and work on the appropriate strategies for risk management. Support & mentor the more junior Project Engineers. Support the Project Managers with technical queries from the customers & participate in customer communication. Track activities to project plans and budgets, regularly reporting to the Project Managers on progress as required. Support the business in providing information to aid the creation of proposals as required. Provide technical support for procurement throughout the project lifecycle to ensure timely response to supplier queries. Provide support to SQE and Quality team as required to resolve quality issues, including raising formal request, fault finding and test support. Provide support to engineering design as required by the project. Provide support to technicians with issues/problems arising during the build cycle. Provide support to the Test Technicians and Commissioning Engineers as required by the project. Support Site Engineers throughout off-site work with provision of information, materials and liaison with internal resources. Ensure project activities are delivered as defined by the Project Manager, including ensuring design reviews are held, FMEAs are conducted and appropriate test plans are in place. General activities Provide a professional backup service for colleagues during peak times or during absence. Maintain continuous professional development to ensure knowledge is up to date. Act as an ambassador for the company in all interactions with customers and the public. Carry out any other ad-hoc duties as required to support the needs of the business. Skills, Knowledge and Expertise Essential HND or Degree in Mechanical / Electrical / Manufacturing Engineering or related subject. Substantial experience of working in a manufacturing engineering environment. Flexibility, enthusiasm, self-motivated and able to work well under own initiative. Able to build long-term successful client partnerships, both internally and externally. Read & understand mechanical & electrical drawings. Able to read & use Gantt charts/project plans. Previous experience of an ERP system. Decision-making/problem solving skills. Strong presentation skills, confident speaker and professionally presented. Desirable Experience of working on multiply projects. Practical competence in mechanical / systems assembly. Strong communication skills. Experience of working within a Defence environment. Knowledge of ISO9000 or a similar QA system. Role travel requirements The duties of this appointment relate to the UK, but you may be required to travel when required by the Company. It is not envisaged that you shall be required to work outside the UK for more than one month. Other requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to Security Check level or be able to obtain this level. This normally requires 5 years residence in the UK. Benefits At CMS2, we believe in rewarding our people and supporting their wellbeing. Alongside our competitive salaries we offer a comprehensive benefits package including, Company Profit Share Scheme, Generous Holiday Allowance with the ability to buy and sell holiday and more.
May 06, 2026
Full time
Description CMS2 is a specialist equipment manufacturer supplying maritime atmosphere control systems and support services. CMS2 are experts in enabling high availability atmosphere management systems to generate breathable air for submariners, allowing boats to remain underwater for long periods of time. We do this by combining over sixty years of expertise with the latest technology and processes to design, build and support high quality systems and solutions. We are looking for a Senior Project Engineer to join our multidisciplinary engineering team to support in the creation of novel engineering solutions to support new product introduction as well as developing improvements to the existing product line. Key Responsibilities Reporting to the Industrialisation Manager, you will manage any design improvement/obsolescence activities relating to the assigned projects, providing technical guidance in line with the Product Specification to the engineering resources assigned. Managing the flow of information between multiple departments. Responsible for implementing changes to maintain specifications & drawings. Responsible for creation and maintenance of Product Bills of Materials. Review the content of standard project documentation i.e. technical, operation, maintenance manuals. Report on the technical content of the project to the Project Managers. This includes supporting multi-departmental reviews to ensure the right approach is being followed, and that any requirements for additional expertise are addressed. Identify technical risks & provide support to the Project Managers and work on the appropriate strategies for risk management. Support & mentor the more junior Project Engineers. Support the Project Managers with technical queries from the customers & participate in customer communication. Track activities to project plans and budgets, regularly reporting to the Project Managers on progress as required. Support the business in providing information to aid the creation of proposals as required. Provide technical support for procurement throughout the project lifecycle to ensure timely response to supplier queries. Provide support to SQE and Quality team as required to resolve quality issues, including raising formal request, fault finding and test support. Provide support to engineering design as required by the project. Provide support to technicians with issues/problems arising during the build cycle. Provide support to the Test Technicians and Commissioning Engineers as required by the project. Support Site Engineers throughout off-site work with provision of information, materials and liaison with internal resources. Ensure project activities are delivered as defined by the Project Manager, including ensuring design reviews are held, FMEAs are conducted and appropriate test plans are in place. General activities Provide a professional backup service for colleagues during peak times or during absence. Maintain continuous professional development to ensure knowledge is up to date. Act as an ambassador for the company in all interactions with customers and the public. Carry out any other ad-hoc duties as required to support the needs of the business. Skills, Knowledge and Expertise Essential HND or Degree in Mechanical / Electrical / Manufacturing Engineering or related subject. Substantial experience of working in a manufacturing engineering environment. Flexibility, enthusiasm, self-motivated and able to work well under own initiative. Able to build long-term successful client partnerships, both internally and externally. Read & understand mechanical & electrical drawings. Able to read & use Gantt charts/project plans. Previous experience of an ERP system. Decision-making/problem solving skills. Strong presentation skills, confident speaker and professionally presented. Desirable Experience of working on multiply projects. Practical competence in mechanical / systems assembly. Strong communication skills. Experience of working within a Defence environment. Knowledge of ISO9000 or a similar QA system. Role travel requirements The duties of this appointment relate to the UK, but you may be required to travel when required by the Company. It is not envisaged that you shall be required to work outside the UK for more than one month. Other requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to Security Check level or be able to obtain this level. This normally requires 5 years residence in the UK. Benefits At CMS2, we believe in rewarding our people and supporting their wellbeing. Alongside our competitive salaries we offer a comprehensive benefits package including, Company Profit Share Scheme, Generous Holiday Allowance with the ability to buy and sell holiday and more.
Senior Manufacturing Engineer Ampthill, Bedfordshire Contract, inside IR35 37.5h, 4 day working week Monday to Thursday Are you a Manufacturing Engineer with experience of CNC machining and the Hyper-Mill Cam system and or Robotic programming to support the LMUK Additive manufacturing development team (WAAM) . Are you passionate about driving innovation and excellence in manufacturing? If the answer to this is 'Yes', we want to hear from you! This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team at Lockheed Martin, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The Manufacturing Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Responsibilities Develop manufacturing processes. Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience Experience with 5 axis CNC machining and the Hyper-Mill Cam system or Robotic Welding and Robot studio Cam systems. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 06, 2026
Contractor
Senior Manufacturing Engineer Ampthill, Bedfordshire Contract, inside IR35 37.5h, 4 day working week Monday to Thursday Are you a Manufacturing Engineer with experience of CNC machining and the Hyper-Mill Cam system and or Robotic programming to support the LMUK Additive manufacturing development team (WAAM) . Are you passionate about driving innovation and excellence in manufacturing? If the answer to this is 'Yes', we want to hear from you! This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team at Lockheed Martin, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The Manufacturing Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Responsibilities Develop manufacturing processes. Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience Experience with 5 axis CNC machining and the Hyper-Mill Cam system or Robotic Welding and Robot studio Cam systems. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Quality Manager A well-established UK-based manufacturing organisation specialising in disposable products for the catering sector is seeking an experienced and detail-oriented Quality Manager to oversee and enhance its quality assurance processes. This role plays a key part in maintaining high standards across all operations, ensuring compliance with industry regulations, and promoting a culture of continuous improvement across the business. The successful candidate will provide strong leadership in developing and maintaining an environment focused on quality, operational excellence, and regulatory compliance. The position will also support the development and implementation of quality processes aligned with recognised Quality Management Systems and ensure these standards are embedded across the organisation. Key Responsibilities Develop, implement, and maintain quality management systems in line with industry standards and regulatory requirements. Ensure compliance with recognised quality and sustainability frameworks, including relevant food safety and environmental standards. Lead internal and external audits to ensure ongoing compliance with applicable safety and quality protocols. Analyse quality data to identify trends, determine root causes of issues, and drive corrective and preventive actions. Work closely with cross-functional teams to establish quality objectives, procedures, and staff training programmes. Monitor production processes to ensure adherence to quality specifications and operational standards. Review and update quality assurance policies and procedures to reflect best practice and regulatory changes. Provide guidance and training to employees on quality standards, compliance requirements, and quality improvement initiatives. Prepare reports on quality metrics, audit results, and improvement actions for senior management. Maintain effective working relationships with customers and suppliers to support quality performance and operational efficiency. Requirements Proven experience in a quality assurance or quality management role within a manufacturing or food production environment. Strong knowledge of HACCP principles and their practical application in production settings. Experience with recognised quality, safety, and ethical compliance frameworks (e.g., food safety, environmental, and supply chain standards). Excellent analytical skills with the ability to interpret complex data and identify improvement opportunities. Demonstrated leadership experience, including managing teams and driving continuous improvement initiatives. Relevant qualifications in quality management or a related discipline are desirable. Strong organisational skills with a high level of attention to detail. Ability to collaborate effectively across departments while maintaining professionalism and integrity. Summary This role is critical in ensuring the organisation consistently delivers products that meet the highest quality standards while maintaining full compliance with regulatory and safety requirements. It offers an opportunity for a motivated professional to contribute their expertise within a dynamic and quality-focused manufacturing environment.
May 06, 2026
Full time
Quality Manager A well-established UK-based manufacturing organisation specialising in disposable products for the catering sector is seeking an experienced and detail-oriented Quality Manager to oversee and enhance its quality assurance processes. This role plays a key part in maintaining high standards across all operations, ensuring compliance with industry regulations, and promoting a culture of continuous improvement across the business. The successful candidate will provide strong leadership in developing and maintaining an environment focused on quality, operational excellence, and regulatory compliance. The position will also support the development and implementation of quality processes aligned with recognised Quality Management Systems and ensure these standards are embedded across the organisation. Key Responsibilities Develop, implement, and maintain quality management systems in line with industry standards and regulatory requirements. Ensure compliance with recognised quality and sustainability frameworks, including relevant food safety and environmental standards. Lead internal and external audits to ensure ongoing compliance with applicable safety and quality protocols. Analyse quality data to identify trends, determine root causes of issues, and drive corrective and preventive actions. Work closely with cross-functional teams to establish quality objectives, procedures, and staff training programmes. Monitor production processes to ensure adherence to quality specifications and operational standards. Review and update quality assurance policies and procedures to reflect best practice and regulatory changes. Provide guidance and training to employees on quality standards, compliance requirements, and quality improvement initiatives. Prepare reports on quality metrics, audit results, and improvement actions for senior management. Maintain effective working relationships with customers and suppliers to support quality performance and operational efficiency. Requirements Proven experience in a quality assurance or quality management role within a manufacturing or food production environment. Strong knowledge of HACCP principles and their practical application in production settings. Experience with recognised quality, safety, and ethical compliance frameworks (e.g., food safety, environmental, and supply chain standards). Excellent analytical skills with the ability to interpret complex data and identify improvement opportunities. Demonstrated leadership experience, including managing teams and driving continuous improvement initiatives. Relevant qualifications in quality management or a related discipline are desirable. Strong organisational skills with a high level of attention to detail. Ability to collaborate effectively across departments while maintaining professionalism and integrity. Summary This role is critical in ensuring the organisation consistently delivers products that meet the highest quality standards while maintaining full compliance with regulatory and safety requirements. It offers an opportunity for a motivated professional to contribute their expertise within a dynamic and quality-focused manufacturing environment.
Job Description: We're building something special at DXC Technology DXC Technology is committed to building diverse, inclusive teams. We welcome applications from all backgrounds and particularly encourage interest from women, underrepresented groups, and neurodivergent candidates. We offer reasonable adjustments throughout the hiring process and are dedicated to creating a supportive, accessible environment for everyone. Here at DXC Technology we continue to significantly expand our SAP business across the UK and Europe. We are actively looking for Senior SAP S/4HANA Logistic Consultant to join our growing team. If you're passionate about engaging in the full lifecycle of SAP projects-from Discovery, Scoping to project delivery, this role could be perfect for you. You'll be working with clients across multiple industries in the UK and Europe, applying your subject matter expertise to help deliver value-driven SAP solutions.We focus on three core drivers of growth: People, Customers, and Operational Execution-the foundation of our business and where we invest heavily.British Nationals are preferred and we may consider other candidates under exceptional circumstances.DXC Technology is seeking a SAP S/4HANA Logistic Consultant to Lead SAP S/4HANA-based Logistics and Warehouse transformation projects for our enterprise clients. This is a senior role sits within our SAP Pre-sales, Consulting & Delivery team and will lead the Discovery, design, Build and deployment of best-in-class procurement solutions - blending technical depth, process insight, and consultative leadership. Key Responsibilities: Translate business use cases into detailed functional specifications and SAP designs SAP Activate & Fit-to-Standard Workshops: Conduct Explore phase workshops to assess requirements, perform Fit-to-Standard analysis, and drive SAP best practice adoption Deliver hands-on consulting in SAP IM/WM/EWM modules during project lifecycle Support configuration, testing, and deployment phases of SAP implementations Build strong client relationships as a trusted advisor on SAP best practices. Contribute to knowledge-sharing and team enablement Collaborate in cross-functional teams to deliver integrated supply chain solutions Provide post-go-live support and continuous improvement recommendations Continuous Innovation: Stay updated on SAP innovations, S/4HANA advancements, and digital transformation trends to advise leadership on future SAP strategy Essential Requirements: Considerable years of hands on SAP Logistics experience, with strong exposure to S/4HANA projects Experience in multiple full lifecycle implementations in WM, MM, IM, or EWM Hands-on experience with SAP Activate methodology, leading Fit-to-Standard workshops, and guiding Agile SAP implementations Deep understanding of SAP business processes, integration points, and best practices Strong stakeholder management and the ability to bridge business and technical teams Understanding of Quality Management and integration touchpoints with logistics Hands-on with Fiori applications in the IM/EWM space Working knowledge of SAP Mobile and process automation tools Familiar with process modelling and documentation using tools like Signavio Experience using SAP Solution Manager (SolMan) and JIRA Excellent communication, leadership, and documentation skills, with experience in leading cross-functional SAP teams Consulting mindset - ability to solve problems, propose solutions, and advise clients Adaptability in working across sectors and with global delivery models Independent and team-oriented work approach with proactive ownership Certifications & Qualifications: Bachelor's degree in a related field (e.g., Supply Chain, IT, Engineering) SAP certifications in logistics modules preferred Ongoing participation in professional development and SAP learning paths Employee Benefits: As part of our competitive remuneration package, flexible benefits are available. There is an option to "flex up and down" on specific benefits, for example buy or sell annual leave, Private Medical Benefit, Dental and Travel Insurance You will also have access to 'Perks at Work', a discount store to purchase gift cards at reduced rates and get discounts on holidays, restaurants, activities, groceries and moreAt DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive.Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available .
May 06, 2026
Full time
Job Description: We're building something special at DXC Technology DXC Technology is committed to building diverse, inclusive teams. We welcome applications from all backgrounds and particularly encourage interest from women, underrepresented groups, and neurodivergent candidates. We offer reasonable adjustments throughout the hiring process and are dedicated to creating a supportive, accessible environment for everyone. Here at DXC Technology we continue to significantly expand our SAP business across the UK and Europe. We are actively looking for Senior SAP S/4HANA Logistic Consultant to join our growing team. If you're passionate about engaging in the full lifecycle of SAP projects-from Discovery, Scoping to project delivery, this role could be perfect for you. You'll be working with clients across multiple industries in the UK and Europe, applying your subject matter expertise to help deliver value-driven SAP solutions.We focus on three core drivers of growth: People, Customers, and Operational Execution-the foundation of our business and where we invest heavily.British Nationals are preferred and we may consider other candidates under exceptional circumstances.DXC Technology is seeking a SAP S/4HANA Logistic Consultant to Lead SAP S/4HANA-based Logistics and Warehouse transformation projects for our enterprise clients. This is a senior role sits within our SAP Pre-sales, Consulting & Delivery team and will lead the Discovery, design, Build and deployment of best-in-class procurement solutions - blending technical depth, process insight, and consultative leadership. Key Responsibilities: Translate business use cases into detailed functional specifications and SAP designs SAP Activate & Fit-to-Standard Workshops: Conduct Explore phase workshops to assess requirements, perform Fit-to-Standard analysis, and drive SAP best practice adoption Deliver hands-on consulting in SAP IM/WM/EWM modules during project lifecycle Support configuration, testing, and deployment phases of SAP implementations Build strong client relationships as a trusted advisor on SAP best practices. Contribute to knowledge-sharing and team enablement Collaborate in cross-functional teams to deliver integrated supply chain solutions Provide post-go-live support and continuous improvement recommendations Continuous Innovation: Stay updated on SAP innovations, S/4HANA advancements, and digital transformation trends to advise leadership on future SAP strategy Essential Requirements: Considerable years of hands on SAP Logistics experience, with strong exposure to S/4HANA projects Experience in multiple full lifecycle implementations in WM, MM, IM, or EWM Hands-on experience with SAP Activate methodology, leading Fit-to-Standard workshops, and guiding Agile SAP implementations Deep understanding of SAP business processes, integration points, and best practices Strong stakeholder management and the ability to bridge business and technical teams Understanding of Quality Management and integration touchpoints with logistics Hands-on with Fiori applications in the IM/EWM space Working knowledge of SAP Mobile and process automation tools Familiar with process modelling and documentation using tools like Signavio Experience using SAP Solution Manager (SolMan) and JIRA Excellent communication, leadership, and documentation skills, with experience in leading cross-functional SAP teams Consulting mindset - ability to solve problems, propose solutions, and advise clients Adaptability in working across sectors and with global delivery models Independent and team-oriented work approach with proactive ownership Certifications & Qualifications: Bachelor's degree in a related field (e.g., Supply Chain, IT, Engineering) SAP certifications in logistics modules preferred Ongoing participation in professional development and SAP learning paths Employee Benefits: As part of our competitive remuneration package, flexible benefits are available. There is an option to "flex up and down" on specific benefits, for example buy or sell annual leave, Private Medical Benefit, Dental and Travel Insurance You will also have access to 'Perks at Work', a discount store to purchase gift cards at reduced rates and get discounts on holidays, restaurants, activities, groceries and moreAt DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive.Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available .
We are FBC UK, Fox's Burton's Companies! And we bake the UK's most incredible biscuits (we might be slightly biased, but we will leave that for you to judge). FBC UK was a match made in heaven, with two of the top UK biscuits manufacturers (Burton's Biscuits and Fox's Biscuits) coming together to create one unique, integrated company. We are home to famous iconic brands, including Maryland, Fox's, Jammie Dodger & Rocky, to name just a few. We are proud manufacturing partners to some of the biggest UK retailers and household names. We bake our incredible biscuits at eight bakeries across the UK, located at Isle of Arran, Livingston, Blackpool, Llantarnam, Edinburgh, Kirkham, Batley & Dorset and our HQ in St Albans. Together, we employ circa 4,000 amazing colleagues across all our locations. Whilst we know that we have delicious products we also know that that the key ingredient to our success is our people, and the passion we have for our brands. You could be the jammy to our dodger, party ring to our Fox's or the choc-chip to our Maryland?! We knead people with innovative ideas, an entrepreneurial spirit, and the commitment to drive FBC UK to success. We are committed to building an inclusive workforce that feels empowered to build a fulfilling and successful career. By embracing diversity, equity, and inclusion (DEI) we create a supportive environment for people to thrive and strive to have more positive impact. We understand that having formal and on-the-job learning opportunities is key to our colleagues' professional and personal growth. We are committed to providing an environment where everyone can learn from each other and grow through a variety of learning experiences. Our colleagues make our business special. With strong community values, we believe FBC UK is a more prosperous and fun place to work when people feel free to be themselves. We believe in the power of being authentic, entrepreneurial and supporting each other whilst meeting our business goals. About the Role As Site Industrialisation Manager you will ensure the link between R&D Test Kitchen and large scale bakery manufacture, product development project delivery and technical information for specification generation.You will have expert knowledge of product development process, with key focus on industrialisation, scale up and process in an operations setting. You will be highly skilled and accountable for managing the process in organising and running trials, pre production runs and launches. You will manage the process to ensure ordering and ensuring materials are on site on time and ensuring all documentation is completed and communicated to key stakeholders.As this is a group role, you will need to be able to travel between sites and be present for key project milestones. Interaction between functions and working in partnership with key stakeholders to understand current challenges and objectives, will be vital to the success of this role. Main Responsibilities Leads the project handover from test bakery to scale up to full production scale manufacture through series of product & packaging trials. Support R&D Industrialisation, in developing and implementing a robust, gold standard product trial and launch validation process which is standardised across FBC UK network. Bringing in best practice and ensuring team completes all documentation to high standard required for organisation of trials, pre production runs and launches. Accountable to ensure project critical paths are met to deliver project OTIF. Ownership of bakery activity plan, escalating pinch points and activity concerns. Build and maintain close working relationships at bakeries and manage up on issues or queries. Lead communication to bakeries leadership through pre trial meetings to ensure all stakeholders and informed and engaged in trials and launch phase Support R&D Industrialisation in representation at project reviews advising on capability, resource and project critical paths. Accountable for the completion of documents for new products and processes for commercial scale-up, (raw materials, production line layout, finished product specifications). Support team in ensuring all information and data is collected from trials to complete detailed documentation for launch handover specifications. Support team in ensuring trial products assessed against agreed QAS to ensure trials meet the brand standard and shelf life. Attendance in bakeries production planning meeting to ensure project trials dates are agreed and locked down in advance with early visibility. Creatively problem solves to ensure products run with agreed throughputs, costing and quality Lead material validation through process to support Procurement and Technical Build a strong understanding of FBC UK network of capability striving to be expert in total capability of each Bakery. Investigate and support any trouble shooting that is affecting wider capability. Support capacity assist projects and large capital projects Who we are looking for Excellent understanding and strong interest in food product development Excellent working knowledge of manufacturing capabilities, products, process flows and HACCP systems. Direct Experience in working with all level company business partners, with influence and managing senior stakeholders. Experience of Hamilton-Grant database is desirable. Experience of allergen control is desirable. Knowledge of food legislation is desirable. High level of computer literacy - Microsoft Excel/Word and Internet/SAP Proven track record in maintaining good working relationships. Confident in communication at all levels to ensure R&D requirements are met and maintained. Must be extremely organised, with exceptional communication skills. Drive, energy and enthusiasm - a good self-starter and a quick learner. Able to work on your own initiative and as part of a team. Methodical approach with good prioritization skills, the ability to work to short deadlines and under pressure. Excellent attention to detail and high standards Excellent time management. Passion for creativity and innovation in food / bakery Excellent interpersonal skills Strong analytical skills Strong IT skills Diversity Statement FBC UK is committed to building a diverse and inclusive culture in which all employees feel welcomed and appreciated and have the same opportunities. We believe all of our people are equally talented in their own way. In nurturing the curiosity and natural abilities of our employees, we provide them, generation after generation, the means to succeed personally and professionally, enabling them to craft their journey at FBC UK. The diversity of our talents is what makes our work environment multicultural, innovative and highly rewarding.
May 06, 2026
Full time
We are FBC UK, Fox's Burton's Companies! And we bake the UK's most incredible biscuits (we might be slightly biased, but we will leave that for you to judge). FBC UK was a match made in heaven, with two of the top UK biscuits manufacturers (Burton's Biscuits and Fox's Biscuits) coming together to create one unique, integrated company. We are home to famous iconic brands, including Maryland, Fox's, Jammie Dodger & Rocky, to name just a few. We are proud manufacturing partners to some of the biggest UK retailers and household names. We bake our incredible biscuits at eight bakeries across the UK, located at Isle of Arran, Livingston, Blackpool, Llantarnam, Edinburgh, Kirkham, Batley & Dorset and our HQ in St Albans. Together, we employ circa 4,000 amazing colleagues across all our locations. Whilst we know that we have delicious products we also know that that the key ingredient to our success is our people, and the passion we have for our brands. You could be the jammy to our dodger, party ring to our Fox's or the choc-chip to our Maryland?! We knead people with innovative ideas, an entrepreneurial spirit, and the commitment to drive FBC UK to success. We are committed to building an inclusive workforce that feels empowered to build a fulfilling and successful career. By embracing diversity, equity, and inclusion (DEI) we create a supportive environment for people to thrive and strive to have more positive impact. We understand that having formal and on-the-job learning opportunities is key to our colleagues' professional and personal growth. We are committed to providing an environment where everyone can learn from each other and grow through a variety of learning experiences. Our colleagues make our business special. With strong community values, we believe FBC UK is a more prosperous and fun place to work when people feel free to be themselves. We believe in the power of being authentic, entrepreneurial and supporting each other whilst meeting our business goals. About the Role As Site Industrialisation Manager you will ensure the link between R&D Test Kitchen and large scale bakery manufacture, product development project delivery and technical information for specification generation.You will have expert knowledge of product development process, with key focus on industrialisation, scale up and process in an operations setting. You will be highly skilled and accountable for managing the process in organising and running trials, pre production runs and launches. You will manage the process to ensure ordering and ensuring materials are on site on time and ensuring all documentation is completed and communicated to key stakeholders.As this is a group role, you will need to be able to travel between sites and be present for key project milestones. Interaction between functions and working in partnership with key stakeholders to understand current challenges and objectives, will be vital to the success of this role. Main Responsibilities Leads the project handover from test bakery to scale up to full production scale manufacture through series of product & packaging trials. Support R&D Industrialisation, in developing and implementing a robust, gold standard product trial and launch validation process which is standardised across FBC UK network. Bringing in best practice and ensuring team completes all documentation to high standard required for organisation of trials, pre production runs and launches. Accountable to ensure project critical paths are met to deliver project OTIF. Ownership of bakery activity plan, escalating pinch points and activity concerns. Build and maintain close working relationships at bakeries and manage up on issues or queries. Lead communication to bakeries leadership through pre trial meetings to ensure all stakeholders and informed and engaged in trials and launch phase Support R&D Industrialisation in representation at project reviews advising on capability, resource and project critical paths. Accountable for the completion of documents for new products and processes for commercial scale-up, (raw materials, production line layout, finished product specifications). Support team in ensuring all information and data is collected from trials to complete detailed documentation for launch handover specifications. Support team in ensuring trial products assessed against agreed QAS to ensure trials meet the brand standard and shelf life. Attendance in bakeries production planning meeting to ensure project trials dates are agreed and locked down in advance with early visibility. Creatively problem solves to ensure products run with agreed throughputs, costing and quality Lead material validation through process to support Procurement and Technical Build a strong understanding of FBC UK network of capability striving to be expert in total capability of each Bakery. Investigate and support any trouble shooting that is affecting wider capability. Support capacity assist projects and large capital projects Who we are looking for Excellent understanding and strong interest in food product development Excellent working knowledge of manufacturing capabilities, products, process flows and HACCP systems. Direct Experience in working with all level company business partners, with influence and managing senior stakeholders. Experience of Hamilton-Grant database is desirable. Experience of allergen control is desirable. Knowledge of food legislation is desirable. High level of computer literacy - Microsoft Excel/Word and Internet/SAP Proven track record in maintaining good working relationships. Confident in communication at all levels to ensure R&D requirements are met and maintained. Must be extremely organised, with exceptional communication skills. Drive, energy and enthusiasm - a good self-starter and a quick learner. Able to work on your own initiative and as part of a team. Methodical approach with good prioritization skills, the ability to work to short deadlines and under pressure. Excellent attention to detail and high standards Excellent time management. Passion for creativity and innovation in food / bakery Excellent interpersonal skills Strong analytical skills Strong IT skills Diversity Statement FBC UK is committed to building a diverse and inclusive culture in which all employees feel welcomed and appreciated and have the same opportunities. We believe all of our people are equally talented in their own way. In nurturing the curiosity and natural abilities of our employees, we provide them, generation after generation, the means to succeed personally and professionally, enabling them to craft their journey at FBC UK. The diversity of our talents is what makes our work environment multicultural, innovative and highly rewarding.
Buyer - New Homes (Fixed-Term Contract) Cannock Up to 50,000 + Car Allowance A reputable House Builder with offices located in the West Midlands are seeking a Fixed-term Buyer, will also consider a competent Assistant or even a Senior. Salary is up to 50K. There may also be a potential for this role to go permanent, dependent on the Candidate but there is business growth. Working closely with the Commercial Team you will be running live housing sites and responsible for bulk buying to contribute to the procurement of quality materials and services essential to the successful delivery of construction projects. Job Duties Source, evaluate and negotiate with suppliers to secure the best possible terms for materials and services required for construction projects. Manage purchase orders and contracts, ensuring compliance with company policies and regulatory requirements. Maintain accurate records of procurement activities and supplier performance for reporting purposes. Work closely with project managers and site teams to forecast material requirements and ensure timely delivery to meet project schedules. Identify opportunities for cost savings and process improvements within the procurement function. Monitor market trends and supplier capabilities to mitigate risks associated with supply chain disruptions. Ensure all purchased materials meet quality standards and specifications in line with project requirements. Required Qualifications Valid driving licence No formal degree required; however, relevant qualifications or training in procurement, supply chain management, or construction materials are advantageous. Experience Proven experience in material buying within the new build housing sector. Demonstrable track record of managing supplier relationships and negotiating favourable terms. Knowledge and Skills Strong understanding of construction materials, their applications and quality standards. Excellent negotiation and communication skills. Ability to analyse market conditions and supplier performance to inform purchasing decisions. Proficiency in procurement software and Microsoft Office applications. Organised with strong attention to detail and the ability to manage multiple priorities.
May 05, 2026
Full time
Buyer - New Homes (Fixed-Term Contract) Cannock Up to 50,000 + Car Allowance A reputable House Builder with offices located in the West Midlands are seeking a Fixed-term Buyer, will also consider a competent Assistant or even a Senior. Salary is up to 50K. There may also be a potential for this role to go permanent, dependent on the Candidate but there is business growth. Working closely with the Commercial Team you will be running live housing sites and responsible for bulk buying to contribute to the procurement of quality materials and services essential to the successful delivery of construction projects. Job Duties Source, evaluate and negotiate with suppliers to secure the best possible terms for materials and services required for construction projects. Manage purchase orders and contracts, ensuring compliance with company policies and regulatory requirements. Maintain accurate records of procurement activities and supplier performance for reporting purposes. Work closely with project managers and site teams to forecast material requirements and ensure timely delivery to meet project schedules. Identify opportunities for cost savings and process improvements within the procurement function. Monitor market trends and supplier capabilities to mitigate risks associated with supply chain disruptions. Ensure all purchased materials meet quality standards and specifications in line with project requirements. Required Qualifications Valid driving licence No formal degree required; however, relevant qualifications or training in procurement, supply chain management, or construction materials are advantageous. Experience Proven experience in material buying within the new build housing sector. Demonstrable track record of managing supplier relationships and negotiating favourable terms. Knowledge and Skills Strong understanding of construction materials, their applications and quality standards. Excellent negotiation and communication skills. Ability to analyse market conditions and supplier performance to inform purchasing decisions. Proficiency in procurement software and Microsoft Office applications. Organised with strong attention to detail and the ability to manage multiple priorities.
Senior Specification Manager - London Home Based (Hybrid) Luxury A&D Specification London Focused Full-Time Influence design. Shape projects. Build a premium pipeline. We're looking for an experienced and commercially driven Senior Specification Manager to join House of Rohl, part of Fortune Brands Innovations, supporting luxury hospitality and high-end residential projects across London. This is a senior, high-impact role within the Architecture & Design (A&D) community, where you'll work closely with architects, interior designers, developers, hoteliers and specialist partners to secure early-stage specifications and guide projects through to successful delivery. You'll represent a market-leading, multi-brand portfolio across Perrin & Rowe, Shaws of Darwen, Victoria + Albert and Aqualisa, delivering complete, design-led bathroom solutions. Supported by dedicated technical, value-engineering and project delivery teams, this role offers both autonomy and backing to build a strong, sustainable pipeline within the London market. If you thrive on relationship-led selling, early-stage influence, and seeing complex projects through from concept to completion, this role offers real visibility, credibility, and long-term career potential. What You Will Be Responsible For You'll play a critical role in driving specification influence, pipeline strength, and conversion within the London A&D community. Market Engagement & Immediate Growth Securing early- and live-stage specifications through proactive engagement with the London A&D community Leveraging existing relationships to deliver short-term commercial wins Positioning House of Rohl as the preferred multi-brand specification partner within luxury hospitality and high-end residential sectors Project & Pipeline Development Building, managing, and converting a strong pipeline of London-based projects Driving multi-brand specification to maximise project value and share of scope Maintaining accurate pipeline forecasting and reporting through CRM systems Leveraging internal technical, value-engineering and project support teams to strengthen proposals and improve conversion Lifecycle & Relationship Management Managing projects from concept and design through procurement, installation, and handover Ensuring specification integrity is maintained throughout the project lifecycle Developing long-term A&D relationships to drive repeat specification and advocacy Collaborating with internal stakeholders to support seamless transition from specification to delivery Strategic Growth & Market Development Supporting long-term market education and pipeline development activities Playing a key role in activating the Clerkenwell (Icon City) studio as a hub for A&D engagement Providing structured market insight to inform UK and EMEAA growth strategy For This Role We Would Need You To Demonstrate You'll be commercially astute, well-connected, and confident managing complex, design-led projects within long sales cycles. You'll bring: 5+ years' experience in specification or contract sales within luxury residential, hospitality, or design-led construction sectors An established and active network within the London A&D community, with demonstrable concept-stage influence A proven track record of converting specifications through to delivered projects Strong consultative selling, presentation, and stakeholder management skills Experience managing complex pipelines using CRM and structured reporting tools Experience working with premium or design-led brands What Your Colleagues Say About You Credible, knowledgeable, and trusted within the A&D community Commercially focused with a long-term view of project lifecycles Confident presenting and influencing senior stakeholders Well organised and disciplined in pipeline and project management Collaborative and supportive of cross-functional teams Core Competencies Cultivates Innovation - Curious, commercially aware, and design-led in approach Active Learner - Continuously develops product, market, and technical knowledge Collaborates - Builds strong partnerships internally and externally Plans and Aligns - Focuses effort where it delivers sustainable value Our Purpose, Values & Behaviours At the heart of everything we do is our belief in being a Home for All, empowering people to Make a Difference. We: Think Big, Learn Fast Work It Together Make The Hard Call Our values guide how we work every day: Aligned in how we collaborate Agile in the face of change Accountable to our commitments Action-led, with integrity and transparency Why Join Us? You'll represent a highly respected, design-led portfolio within the luxury sector, supported by strong internal technical, project and value-engineering teams. As part of Fortune Brands Innovations, you'll benefit from the scale and investment of a global organisation while retaining the autonomy to shape your pipeline, influence the market, and build lasting relationships within the London A&D community. Our Hiring Process Initial discussion with our Resourcing Team Interview process (1-2 stages depending on role) Successful candidates notified and start dates confirmed Due to the volume of applications, we receive, if you haven't heard from us within 4 weeks, please consider your application unsuccessful. Note for Recruitment Agencies We manage our vacancies internally, preferring direct hires and referrals. When required, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. Who we are Fortune Brands Innovations are a US-based company, listed on the New York Stock Exchange, that owns and develops a dynamic portfolio of brands for homes worldwide. Our specialist kitchen and bathroom division, Fortune Brands Water Innovations, is made up of leading luxury British brands, Shaws, Perrin & Rowe and Victoria + Albert, plus Riobel from Canada. We market these together under the House of Rohl name.
May 05, 2026
Full time
Senior Specification Manager - London Home Based (Hybrid) Luxury A&D Specification London Focused Full-Time Influence design. Shape projects. Build a premium pipeline. We're looking for an experienced and commercially driven Senior Specification Manager to join House of Rohl, part of Fortune Brands Innovations, supporting luxury hospitality and high-end residential projects across London. This is a senior, high-impact role within the Architecture & Design (A&D) community, where you'll work closely with architects, interior designers, developers, hoteliers and specialist partners to secure early-stage specifications and guide projects through to successful delivery. You'll represent a market-leading, multi-brand portfolio across Perrin & Rowe, Shaws of Darwen, Victoria + Albert and Aqualisa, delivering complete, design-led bathroom solutions. Supported by dedicated technical, value-engineering and project delivery teams, this role offers both autonomy and backing to build a strong, sustainable pipeline within the London market. If you thrive on relationship-led selling, early-stage influence, and seeing complex projects through from concept to completion, this role offers real visibility, credibility, and long-term career potential. What You Will Be Responsible For You'll play a critical role in driving specification influence, pipeline strength, and conversion within the London A&D community. Market Engagement & Immediate Growth Securing early- and live-stage specifications through proactive engagement with the London A&D community Leveraging existing relationships to deliver short-term commercial wins Positioning House of Rohl as the preferred multi-brand specification partner within luxury hospitality and high-end residential sectors Project & Pipeline Development Building, managing, and converting a strong pipeline of London-based projects Driving multi-brand specification to maximise project value and share of scope Maintaining accurate pipeline forecasting and reporting through CRM systems Leveraging internal technical, value-engineering and project support teams to strengthen proposals and improve conversion Lifecycle & Relationship Management Managing projects from concept and design through procurement, installation, and handover Ensuring specification integrity is maintained throughout the project lifecycle Developing long-term A&D relationships to drive repeat specification and advocacy Collaborating with internal stakeholders to support seamless transition from specification to delivery Strategic Growth & Market Development Supporting long-term market education and pipeline development activities Playing a key role in activating the Clerkenwell (Icon City) studio as a hub for A&D engagement Providing structured market insight to inform UK and EMEAA growth strategy For This Role We Would Need You To Demonstrate You'll be commercially astute, well-connected, and confident managing complex, design-led projects within long sales cycles. You'll bring: 5+ years' experience in specification or contract sales within luxury residential, hospitality, or design-led construction sectors An established and active network within the London A&D community, with demonstrable concept-stage influence A proven track record of converting specifications through to delivered projects Strong consultative selling, presentation, and stakeholder management skills Experience managing complex pipelines using CRM and structured reporting tools Experience working with premium or design-led brands What Your Colleagues Say About You Credible, knowledgeable, and trusted within the A&D community Commercially focused with a long-term view of project lifecycles Confident presenting and influencing senior stakeholders Well organised and disciplined in pipeline and project management Collaborative and supportive of cross-functional teams Core Competencies Cultivates Innovation - Curious, commercially aware, and design-led in approach Active Learner - Continuously develops product, market, and technical knowledge Collaborates - Builds strong partnerships internally and externally Plans and Aligns - Focuses effort where it delivers sustainable value Our Purpose, Values & Behaviours At the heart of everything we do is our belief in being a Home for All, empowering people to Make a Difference. We: Think Big, Learn Fast Work It Together Make The Hard Call Our values guide how we work every day: Aligned in how we collaborate Agile in the face of change Accountable to our commitments Action-led, with integrity and transparency Why Join Us? You'll represent a highly respected, design-led portfolio within the luxury sector, supported by strong internal technical, project and value-engineering teams. As part of Fortune Brands Innovations, you'll benefit from the scale and investment of a global organisation while retaining the autonomy to shape your pipeline, influence the market, and build lasting relationships within the London A&D community. Our Hiring Process Initial discussion with our Resourcing Team Interview process (1-2 stages depending on role) Successful candidates notified and start dates confirmed Due to the volume of applications, we receive, if you haven't heard from us within 4 weeks, please consider your application unsuccessful. Note for Recruitment Agencies We manage our vacancies internally, preferring direct hires and referrals. When required, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. Who we are Fortune Brands Innovations are a US-based company, listed on the New York Stock Exchange, that owns and develops a dynamic portfolio of brands for homes worldwide. Our specialist kitchen and bathroom division, Fortune Brands Water Innovations, is made up of leading luxury British brands, Shaws, Perrin & Rowe and Victoria + Albert, plus Riobel from Canada. We market these together under the House of Rohl name.
Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering 45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification/inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organised records of all quality control activities Communicate findings to relevant departments/stakeholders Work cross-functionally to implement root cause corrective actions at supplier Contribute to continuous improvement initiatives to enhance the quality of our products Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: Trained auditor to AS9100 Experienced in conducting Quality Audits & surveillance Quality experience within Mechanical, Manufacturing or Electronic Engineering Proven track record in Quality, Supply Chain or Manufacturing Defence, automotive, or aerospace industry experience Familiar with GD&T and able to use a variety of metrology equipment QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.) Knowledge of the product lifecycle management Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering 45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 05, 2026
Contractor
Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering 45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification/inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organised records of all quality control activities Communicate findings to relevant departments/stakeholders Work cross-functionally to implement root cause corrective actions at supplier Contribute to continuous improvement initiatives to enhance the quality of our products Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: Trained auditor to AS9100 Experienced in conducting Quality Audits & surveillance Quality experience within Mechanical, Manufacturing or Electronic Engineering Proven track record in Quality, Supply Chain or Manufacturing Defence, automotive, or aerospace industry experience Familiar with GD&T and able to use a variety of metrology equipment QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.) Knowledge of the product lifecycle management Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering 45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa £50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you!As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa £50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
May 05, 2026
Full time
Mechanical Design Engineer Permanent role Based in Ampthill Offering circa £50,000 Do you have experience using CREO? Do you have experience using Windchill? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you!As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users, and Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs to Senior Engineers and Governors Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design proving activities on engineering prototypes Ensure components and assemblies adhere to applicable, industry, and business standards Your skillset may include: Experience of working within the Defence, Aerospace, or Space domain Experience in the design and development of mechanical sub-systems and components Experience in the design and specification of electrical interfaces for sub-systems and components Understanding of current materials, treatments, and finishing technology for use in Defence, Aerospace, and Space products Working knowledge of CREO CAD software and experience using the tool to produce complex parametric designs Able to use Windchill PDM system Knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Design Engineer Permanent role Based in Ampthill Offering circa £50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
