PCB Layout Engineer 6 month contract Based in Stevenage Offering 60ph Inside IR35 Do you have experience of Zuken CR5000 or CR8000? Do you have experience of the design processes and best practices for PCB layout? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the PCB Layout Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing full PCB Design Layouts from Electronic, Mechanical and Environmental requirements Provide a design service, which includes Library management, Technical support, Component placement, Signal routing, Peer reviews/checking and the creation of final documentation Ensure designs and hardware are in accordance with the design constraints and conform to design rules and processes Close collaboration with all stakeholders (Internal and External) from conception through to delivery of Hardware against agreed timescales to meet Project deliverables Your skillset may include: Knowledge and experience of the design processes and best practices for PCB layout. An understanding of IPC standards for high reliability products. Knowledge and experience of PCB fabrication processes and technologies (materials, stack-ups etc.) Strong communication skills to facilitate regular face to face and electronic communications with all relevant stakeholders. Knowledge of Zuken CR5000 or CR8000. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! PCB Layout Engineer 6 month contract Based in Stevenage Offering 60ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 15, 2026
Contractor
PCB Layout Engineer 6 month contract Based in Stevenage Offering 60ph Inside IR35 Do you have experience of Zuken CR5000 or CR8000? Do you have experience of the design processes and best practices for PCB layout? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the PCB Layout Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing full PCB Design Layouts from Electronic, Mechanical and Environmental requirements Provide a design service, which includes Library management, Technical support, Component placement, Signal routing, Peer reviews/checking and the creation of final documentation Ensure designs and hardware are in accordance with the design constraints and conform to design rules and processes Close collaboration with all stakeholders (Internal and External) from conception through to delivery of Hardware against agreed timescales to meet Project deliverables Your skillset may include: Knowledge and experience of the design processes and best practices for PCB layout. An understanding of IPC standards for high reliability products. Knowledge and experience of PCB fabrication processes and technologies (materials, stack-ups etc.) Strong communication skills to facilitate regular face to face and electronic communications with all relevant stakeholders. Knowledge of Zuken CR5000 or CR8000. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! PCB Layout Engineer 6 month contract Based in Stevenage Offering 60ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Location: Stevenage (2-3 days per week onsite) Duration: 6 month initial contract Rate: 60ph UMB (Inside IR35) Candidates must hold, or be eligible to obtain UK SC Clearance. Role details: Our client, operating within the Defence & Security sector, is currently seeking a skilled PCB Layout Engineer to join their team in Stevenage on a contract basis. This role requires strong expertise in PCB design and layout, contributing to critical projects with high reliability standards. Key Responsibilities: Providing full PCB design layouts based on electronic, mechanical, and environmental requirements Managing library services, technical support, component placement, signal routing, and peer reviews Creating final documentation ensuring compliance with design constraints and prevailing design rules Collaborating closely with internal and external stakeholders to deliver projects on time Ensuring the final hardware meets project deliverables and design requirements Adhering to company-specific design rules and processes throughout project execution Job Requirements: Thorough knowledge and experience in PCB design processes and best practices Understanding of IPC standards for high reliability products Experience with PCB fabrication processes and technologies, including materials and stack-ups Strong communication skills for effective interaction with stakeholders Preferably, familiarity with Zuken CR5000 or CR8000 Security Clearance (SC) required to start Ability to work both on-site (2-3 days per week) and remotely as needed If you are a PCB Layout Engineer with the required skills and experience, and you are interested in contributing to important Defence & Security initiatives, we would love to hear from you. Apply now to join our client's esteemed team in Stevenage.
May 15, 2026
Contractor
Location: Stevenage (2-3 days per week onsite) Duration: 6 month initial contract Rate: 60ph UMB (Inside IR35) Candidates must hold, or be eligible to obtain UK SC Clearance. Role details: Our client, operating within the Defence & Security sector, is currently seeking a skilled PCB Layout Engineer to join their team in Stevenage on a contract basis. This role requires strong expertise in PCB design and layout, contributing to critical projects with high reliability standards. Key Responsibilities: Providing full PCB design layouts based on electronic, mechanical, and environmental requirements Managing library services, technical support, component placement, signal routing, and peer reviews Creating final documentation ensuring compliance with design constraints and prevailing design rules Collaborating closely with internal and external stakeholders to deliver projects on time Ensuring the final hardware meets project deliverables and design requirements Adhering to company-specific design rules and processes throughout project execution Job Requirements: Thorough knowledge and experience in PCB design processes and best practices Understanding of IPC standards for high reliability products Experience with PCB fabrication processes and technologies, including materials and stack-ups Strong communication skills for effective interaction with stakeholders Preferably, familiarity with Zuken CR5000 or CR8000 Security Clearance (SC) required to start Ability to work both on-site (2-3 days per week) and remotely as needed If you are a PCB Layout Engineer with the required skills and experience, and you are interested in contributing to important Defence & Security initiatives, we would love to hear from you. Apply now to join our client's esteemed team in Stevenage.
Our client is looking for a Product Assurance Manager to join them on a permanent basis. As the Product Assurance Manager, you will be ensuring projects meet their objectives in a safe and reliable way. In this role you will ensure that delivered hardware meets contractual, regulatory, and internal requirements while enabling informed trade-offs on cost, schedule, and technical risk through evidence-based assurance Role: Product Assurance Manager Location: Oxfordshire Hours: Full Time Salary: Discussed Upon Application What you'll be doing: Own the Non-Conformance review (NCR) process by facilitating the identification, correction, and prevention of non-conformances Chair PA boards and gate reviews, e.g. design, assembly, test, and readiness reviews Manage project configuration activities such as approving changes and producing as designed/as built configuration lists Own the delivery of project PA documentation, e.g. PA plan, Declared Lists, Requests for Waiver/Deviation, CoC, etc. Perform or approve all project/product inspections (incoming inspection, Key/Mandatory Inspection points, final inspections) Provide PA monitoring and support of production activities - review of manufacturing, assembly, integration and test procedures, observe on-site activities. Supply chain development via supplier audits and inspection activities Support business development team with required PA input for new bids Continuous improvement of the QMS Collect, evaluate, and disseminate quality-related KPIs for the prevention of problems Conduct internal audits as required Complete any other tasks as commensurate with the level and nature of the post as delegated by the line manager or management team Ensure project deliverables are in line with project PA plan Where appropriate, provide training related to Product Assurance methods and procedures Essential Requirements: Bachelor's or Master's degree-level in relevant subject or HNC minimum with relevant experience Experience in Product Assurance and/or Quality Assurance, preferably in the Space or Aerospace domain, or another highly regulated sector Knowledge and understanding of ECSS (or equivalent) and lean commercial PA / QA approaches Good understanding of mechanical, thermal and radiation tolerance properties of materials and their practical implementation Demonstrate a common sense/pragmatic and logical approach to problem solving Ability to find simple solutions to complex problems Root cause analysis Excellent use of Windows 10 and MS Office, including Outlook, PowerPoint, Word, Excel. Excellent technical English written/verbal communication and presentation skills Comfortable working with and adapting to new IT systems and software Excellent team player with good interpersonal skills to build relationships A practical and positive attitude to new and challenging situations. Self-starter, responsive, acts as soon as issues get identified Takes ownership of a problem from start to finish, presenting findings and solutions. Produces outputs of good quality, with attention to detail. Ability to work within defined timescales to meet programme milestones Ability to work on several projects/tasks Driven by technical challenges, problem solving and practical implementation of new ideas Good judgement to make sound decisions within the role's parameters Desirable Requirements: Internal auditor experience and/or familiarity with ISO 9001. Experience delivering projects against ECSS & MIL standards Hands-on practical experience in mechanical or RF engineering fields Knowledge of configuration management Advanced knowledge of MS Excel (functions, pivot tables, macros, conditional formatting, charts, etc.) Experience with MS Visio Benefits: 28 days holiday + Bank Holidays Yearly Bonus Pension Contribution EAP Assistance Discounted Gym Membership Flexible working subject to role
May 15, 2026
Full time
Our client is looking for a Product Assurance Manager to join them on a permanent basis. As the Product Assurance Manager, you will be ensuring projects meet their objectives in a safe and reliable way. In this role you will ensure that delivered hardware meets contractual, regulatory, and internal requirements while enabling informed trade-offs on cost, schedule, and technical risk through evidence-based assurance Role: Product Assurance Manager Location: Oxfordshire Hours: Full Time Salary: Discussed Upon Application What you'll be doing: Own the Non-Conformance review (NCR) process by facilitating the identification, correction, and prevention of non-conformances Chair PA boards and gate reviews, e.g. design, assembly, test, and readiness reviews Manage project configuration activities such as approving changes and producing as designed/as built configuration lists Own the delivery of project PA documentation, e.g. PA plan, Declared Lists, Requests for Waiver/Deviation, CoC, etc. Perform or approve all project/product inspections (incoming inspection, Key/Mandatory Inspection points, final inspections) Provide PA monitoring and support of production activities - review of manufacturing, assembly, integration and test procedures, observe on-site activities. Supply chain development via supplier audits and inspection activities Support business development team with required PA input for new bids Continuous improvement of the QMS Collect, evaluate, and disseminate quality-related KPIs for the prevention of problems Conduct internal audits as required Complete any other tasks as commensurate with the level and nature of the post as delegated by the line manager or management team Ensure project deliverables are in line with project PA plan Where appropriate, provide training related to Product Assurance methods and procedures Essential Requirements: Bachelor's or Master's degree-level in relevant subject or HNC minimum with relevant experience Experience in Product Assurance and/or Quality Assurance, preferably in the Space or Aerospace domain, or another highly regulated sector Knowledge and understanding of ECSS (or equivalent) and lean commercial PA / QA approaches Good understanding of mechanical, thermal and radiation tolerance properties of materials and their practical implementation Demonstrate a common sense/pragmatic and logical approach to problem solving Ability to find simple solutions to complex problems Root cause analysis Excellent use of Windows 10 and MS Office, including Outlook, PowerPoint, Word, Excel. Excellent technical English written/verbal communication and presentation skills Comfortable working with and adapting to new IT systems and software Excellent team player with good interpersonal skills to build relationships A practical and positive attitude to new and challenging situations. Self-starter, responsive, acts as soon as issues get identified Takes ownership of a problem from start to finish, presenting findings and solutions. Produces outputs of good quality, with attention to detail. Ability to work within defined timescales to meet programme milestones Ability to work on several projects/tasks Driven by technical challenges, problem solving and practical implementation of new ideas Good judgement to make sound decisions within the role's parameters Desirable Requirements: Internal auditor experience and/or familiarity with ISO 9001. Experience delivering projects against ECSS & MIL standards Hands-on practical experience in mechanical or RF engineering fields Knowledge of configuration management Advanced knowledge of MS Excel (functions, pivot tables, macros, conditional formatting, charts, etc.) Experience with MS Visio Benefits: 28 days holiday + Bank Holidays Yearly Bonus Pension Contribution EAP Assistance Discounted Gym Membership Flexible working subject to role
Contract Development Engineer - Inside IR35 - 12 Month Contract + Ext South Wales - On-site - Rate dependent on experience Yolk Recruitment is supporting a global engineering business with an established customer base of major blue-chip manufacturers, and a track record of offering long-term contract opportunities in a professional, stable and positive working environment.This is a 12 month contract with a further 12 months very realistic, on site, supporting a live long-term programme, with further work behind it. You'll be working to validate and verify mechanical components and assemblies, with a mix of theoretical analysis and hands on strip down of components, determining and coordinating test activities, reviewing results, investigating failures and feeding finds back into the wider engineering team. You'll need a mechanical engineering or related degree with strong theoretical knowledge, will be able to read engineering drawings including GD&T and will be used to creating detailed engineering reports. This is what you'll be doing Support the development and validation of mechanical components and assemblies Interpret engineering drawings, including GD&T, and assess fit, function and tolerance stack-up Define test requirements and work with the test team to make sure validation activity is carried out correctly Review test data and engineering reports to assess whether components are performing as intended Investigate failures, wear and deterioration in tested parts and assemblies Strip down components and identify likely failure points before further specialist analysis where needed Feed findings back into engineering decisions around dimensions, materials and product performance Produce clear technical reports to support internal engineering activity and, where required, customer reporting Work closely with design, test and materials teams throughout the development cycle And this is what you'll need Degree qualified in Mechanical Engineering or a related discipline Previous experience in a development, validation, test or product-focused mechanical engineering role Strong ability to read and interpret engineering drawings Good understanding of GD&T and tolerance stack-up Comfortable working with physical components, not just drawings and data Experience investigating engineering problems and understanding why a part has failed or underperformed Strong mechanical fundamentals, including material considerations, forces and component behaviour Are you up to the challenge? If you feel you have the skills, experience and passion to be successful in this Development Engineer role apply now! Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities
May 15, 2026
Contractor
Contract Development Engineer - Inside IR35 - 12 Month Contract + Ext South Wales - On-site - Rate dependent on experience Yolk Recruitment is supporting a global engineering business with an established customer base of major blue-chip manufacturers, and a track record of offering long-term contract opportunities in a professional, stable and positive working environment.This is a 12 month contract with a further 12 months very realistic, on site, supporting a live long-term programme, with further work behind it. You'll be working to validate and verify mechanical components and assemblies, with a mix of theoretical analysis and hands on strip down of components, determining and coordinating test activities, reviewing results, investigating failures and feeding finds back into the wider engineering team. You'll need a mechanical engineering or related degree with strong theoretical knowledge, will be able to read engineering drawings including GD&T and will be used to creating detailed engineering reports. This is what you'll be doing Support the development and validation of mechanical components and assemblies Interpret engineering drawings, including GD&T, and assess fit, function and tolerance stack-up Define test requirements and work with the test team to make sure validation activity is carried out correctly Review test data and engineering reports to assess whether components are performing as intended Investigate failures, wear and deterioration in tested parts and assemblies Strip down components and identify likely failure points before further specialist analysis where needed Feed findings back into engineering decisions around dimensions, materials and product performance Produce clear technical reports to support internal engineering activity and, where required, customer reporting Work closely with design, test and materials teams throughout the development cycle And this is what you'll need Degree qualified in Mechanical Engineering or a related discipline Previous experience in a development, validation, test or product-focused mechanical engineering role Strong ability to read and interpret engineering drawings Good understanding of GD&T and tolerance stack-up Comfortable working with physical components, not just drawings and data Experience investigating engineering problems and understanding why a part has failed or underperformed Strong mechanical fundamentals, including material considerations, forces and component behaviour Are you up to the challenge? If you feel you have the skills, experience and passion to be successful in this Development Engineer role apply now! Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities
Small Works Project Manager Bristol My client is looking for a Small Works Project Manager within a busy contracts team, reporting directly to the Contracts Director. This role will lead the delivery of a high volume portfolio of mechanical building services projects valued up to £250,000, with a department turnover of approximately £2m per annum. The successful candidate will manage projects from tender stage through to delivery and handover, whilst leading a small team responsible for the efficient delivery of multiple projects running concurrently. This position requires an individual comfortable working in a fast paced, agile environment, capable of managing numerous smaller contracts simultaneously while maintaining strong technical, commercial and organisational control. Although projects may occur across the UK, the majority are located along the M4 / M5 corridor. Duties Tendering and delivery of mechanical building services projects up to £250k value Managing a high volume of projects simultaneously, ensuring programme, quality, cost and safety requirements are achieved. Producing and submitting competitive quotations and tenders for HVAC installations. Reviewing tender documentation and identifying technical and commercial risks prior to contract commencement. Design and development of HVAC systems, either independently or in collaboration with the in-house design team. Liaising with manufacturers and suppliers to select appropriate equipment and materials in accordance with client specifications. Managing all contractual and commercial aspects of projects, including cost control and financial performance. Leading project delivery from pre-start meeting through to commissioning and client handover. Planning and defining the scope of works, programme and project activities. Managing and coordinating a small team of engineers, supervisors and subcontractors to ensure works are delivered efficiently. Maintaining regular communication with site operatives and attending site where necessary to support project delivery. Managing project documentation in accordance with the company ISO9001 quality management system. Acting as a client facing representative, maintaining strong professional relationships and ensuring high levels of customer satisfaction. Ensuring compliance with Health & Safety and environmental standards across all projects. Driving continuous improvement in the delivery of small works projects. Qualifications and Experience Proven experience managing mechanical building services or HVAC projects, ideally within small works or fast track environments Experience managing multiple projects simultaneously, with strong organisational and prioritisation skills Experience in tendering and commercial management of projects. Strong working knowledge of HVAC design and system selection. Capable of hands-on problem solving, identifying practical engineering solutions Strong communication skills across written, verbal and client facing interactions. Excellent time management and organisational skills. Commercial awareness and ability to manage project budgets. Process driven with strong attention to detail. Knowledge of Health & Safety and environmental compliance within construction. IT competency including Microsoft Excel, Word, Project and mobile project management tools. Self-motivated with the ability to work both independently and as part of a wider team. Ideal Candidate Background Experience in design or project management of one or more of the following disciplines: • Ventilation systems • Air conditioning / VRF systems • Refrigeration systems • Heating systems • Plumbing and mechanical services The ideal candidate will hold a HNC or HND in Building Services Engineering, or have significant industry experience (typically 10+ years) delivering mechanical building services projects. Experience within a fast-paced small works or refurbishment environment would be advantageous If you are interested in applying please forward an updated CV and copies of your qualifications to Ben Willis at O Neill and Brennan
May 15, 2026
Full time
Small Works Project Manager Bristol My client is looking for a Small Works Project Manager within a busy contracts team, reporting directly to the Contracts Director. This role will lead the delivery of a high volume portfolio of mechanical building services projects valued up to £250,000, with a department turnover of approximately £2m per annum. The successful candidate will manage projects from tender stage through to delivery and handover, whilst leading a small team responsible for the efficient delivery of multiple projects running concurrently. This position requires an individual comfortable working in a fast paced, agile environment, capable of managing numerous smaller contracts simultaneously while maintaining strong technical, commercial and organisational control. Although projects may occur across the UK, the majority are located along the M4 / M5 corridor. Duties Tendering and delivery of mechanical building services projects up to £250k value Managing a high volume of projects simultaneously, ensuring programme, quality, cost and safety requirements are achieved. Producing and submitting competitive quotations and tenders for HVAC installations. Reviewing tender documentation and identifying technical and commercial risks prior to contract commencement. Design and development of HVAC systems, either independently or in collaboration with the in-house design team. Liaising with manufacturers and suppliers to select appropriate equipment and materials in accordance with client specifications. Managing all contractual and commercial aspects of projects, including cost control and financial performance. Leading project delivery from pre-start meeting through to commissioning and client handover. Planning and defining the scope of works, programme and project activities. Managing and coordinating a small team of engineers, supervisors and subcontractors to ensure works are delivered efficiently. Maintaining regular communication with site operatives and attending site where necessary to support project delivery. Managing project documentation in accordance with the company ISO9001 quality management system. Acting as a client facing representative, maintaining strong professional relationships and ensuring high levels of customer satisfaction. Ensuring compliance with Health & Safety and environmental standards across all projects. Driving continuous improvement in the delivery of small works projects. Qualifications and Experience Proven experience managing mechanical building services or HVAC projects, ideally within small works or fast track environments Experience managing multiple projects simultaneously, with strong organisational and prioritisation skills Experience in tendering and commercial management of projects. Strong working knowledge of HVAC design and system selection. Capable of hands-on problem solving, identifying practical engineering solutions Strong communication skills across written, verbal and client facing interactions. Excellent time management and organisational skills. Commercial awareness and ability to manage project budgets. Process driven with strong attention to detail. Knowledge of Health & Safety and environmental compliance within construction. IT competency including Microsoft Excel, Word, Project and mobile project management tools. Self-motivated with the ability to work both independently and as part of a wider team. Ideal Candidate Background Experience in design or project management of one or more of the following disciplines: • Ventilation systems • Air conditioning / VRF systems • Refrigeration systems • Heating systems • Plumbing and mechanical services The ideal candidate will hold a HNC or HND in Building Services Engineering, or have significant industry experience (typically 10+ years) delivering mechanical building services projects. Experience within a fast-paced small works or refurbishment environment would be advantageous If you are interested in applying please forward an updated CV and copies of your qualifications to Ben Willis at O Neill and Brennan
Our client is a highly innovative engineering organisation delivering complex, safety-critical projects within a regulated environmen t. This is an opportunity to work on challenging, multidisciplinary programmes across the full engineering lifecycle.We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Safety Systems Engineer Permanent£40,000 - £50,000 Portsmouth We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Responsibilities Deliver system and functional safety across multiple concurrent, safety-critical engineering projects Develop and maintain Safety Management Plans, safety cases, and assurance documentation Lead hazard identification and risk analysis activities (HAZID, HAZOP, FMEA) and manage hazard logs Ensure safety requirements traceability through design, verification, validation, and evidence generation Collaborate across multidisciplinary teams and support safety reviews, audits, and regulatory engagement Essential Skills and Experience Degree in Systems, Mechanical, Electrical Engineering, or related discipl ine Familiarity with safety standards such as Def Stan, IEC 61508, or MIL-STD frameworks Proven experience in safety engineering within defence or safety-critical environments Experience producing safety cases, hazard analysis, and risk assessments Benefits: Private healthcare Life assurance Professional development Pension contribution
May 15, 2026
Full time
Our client is a highly innovative engineering organisation delivering complex, safety-critical projects within a regulated environmen t. This is an opportunity to work on challenging, multidisciplinary programmes across the full engineering lifecycle.We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Safety Systems Engineer Permanent£40,000 - £50,000 Portsmouth We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Responsibilities Deliver system and functional safety across multiple concurrent, safety-critical engineering projects Develop and maintain Safety Management Plans, safety cases, and assurance documentation Lead hazard identification and risk analysis activities (HAZID, HAZOP, FMEA) and manage hazard logs Ensure safety requirements traceability through design, verification, validation, and evidence generation Collaborate across multidisciplinary teams and support safety reviews, audits, and regulatory engagement Essential Skills and Experience Degree in Systems, Mechanical, Electrical Engineering, or related discipl ine Familiarity with safety standards such as Def Stan, IEC 61508, or MIL-STD frameworks Proven experience in safety engineering within defence or safety-critical environments Experience producing safety cases, hazard analysis, and risk assessments Benefits: Private healthcare Life assurance Professional development Pension contribution
Business Development Manager Infrastructure Repair & Rehabilitation Job Title: Business Development Manager Infrastructure Repair & Rehabilitation Industry Sector: Civil Engineering, Structural Engineering, Infrastructure, Concrete Repairs, Jacking, Post-Tensioning, Expansion Joints, Bridge Bearing Replacement, Cathodic Protection, Structural Surveys and Inspection, Local Authorities, Hospitals, Utilities, Power Companies, Transport, Highways, Water, Energy, Industrial, Commercial, Main Contractors, D&B Contractors, Structural Engineers, Civil Engineers, Specifiers, Consultants and Asset Owners Areas to be covered: Scotland, North East & Cumbria Ideally based: Access to Glasgow Remuneration: £50,000 Neg. + £5,000-£7,000 bonus Benefits: Company EV car + full comprehensive benefits The role of the Business Development Manager Infrastructure Repair & Rehabilitation will involve: Field sales position promoting the repair and rehabilitation of structures Our client has a rich pedigree with the infrastructure, bridges and highways sectors and is looking to further strengthen their position in these areas as well as breaking into new sectors including; transport, water, energy, industrial, utilities and commercial Promoting concrete repairs, jacking, post-tensioning, expansion joints, bridge bearing replacement and cathodic protection solutions This role will focus on our clients 4D principles; determine, develop, design and deliver solutions to asset owners such as local authorities, highways agencies, hospitals, power companies New business development role, you will be targeted to win circa £2m of new projects, could be approx. 20 projects although the two largest client s in Scotland are worth more than £10m Time will be split between asset owners, structural and civil consultants as well as main contractors and D&B contractors Ideally you will have the ability to leverage some existing contacts within one of the aforementioned industry sectors Working in a buddy system with the dedicated Scotland Preconstruction Manager, who is responsible for managing the Estimators Ideally working from the Glasgow office 1-2 days per week The ideal applicant will be a Business Development Manager Infrastructure Repair & Rehabilitation with: Would suit technical experience on infrastructure, highways or bridges with a willingness to get into a field sales role Open on product backgrounds if candidates have a network of contacts within the aforementioned sectors e.g. open to tool hire, anchors, mechanical systems, fixings, concrete, specialist contracting services such as; welding, testing and inspections Would suit technical experience on infrastructure, highways or bridges with a willingness to get into a field sales role Ideally have a proven field sales track record within one of the following sectors ; infrastructure, bridges, highways, transport, water, energy, industrial, utilities (hydro, wind etc.) or commercial Specific knowledge of structural repair systems, jacking, post-tensioning, expansion joints, bridge bearing replacement and cathodic protection solutions not essential but may be useful Ideally with a breath of field sales experience across asset owners, consultants and main contractors Strong work ethic and happy to entertain clients when needed Degree in civil engineering or structuring engineering may be beneficial Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Civil Engineering, Structural Engineering, Infrastructure, Concrete Repairs, Jacking, Post-Tensioning, Expansion Joints, Bridge Bearing Replacement, Cathodic Protection, Structural Surveys and Inspection, Local Authorities, Hospitals, Power Companies, Transport, Utilities, Highways, Water, Energy, Industrial, Welding, Commercial, Main Contractors, D&B Contractors, Structural Engineers, Civil Engineers, Specifiers, Consultants and Asset Owners
May 15, 2026
Full time
Business Development Manager Infrastructure Repair & Rehabilitation Job Title: Business Development Manager Infrastructure Repair & Rehabilitation Industry Sector: Civil Engineering, Structural Engineering, Infrastructure, Concrete Repairs, Jacking, Post-Tensioning, Expansion Joints, Bridge Bearing Replacement, Cathodic Protection, Structural Surveys and Inspection, Local Authorities, Hospitals, Utilities, Power Companies, Transport, Highways, Water, Energy, Industrial, Commercial, Main Contractors, D&B Contractors, Structural Engineers, Civil Engineers, Specifiers, Consultants and Asset Owners Areas to be covered: Scotland, North East & Cumbria Ideally based: Access to Glasgow Remuneration: £50,000 Neg. + £5,000-£7,000 bonus Benefits: Company EV car + full comprehensive benefits The role of the Business Development Manager Infrastructure Repair & Rehabilitation will involve: Field sales position promoting the repair and rehabilitation of structures Our client has a rich pedigree with the infrastructure, bridges and highways sectors and is looking to further strengthen their position in these areas as well as breaking into new sectors including; transport, water, energy, industrial, utilities and commercial Promoting concrete repairs, jacking, post-tensioning, expansion joints, bridge bearing replacement and cathodic protection solutions This role will focus on our clients 4D principles; determine, develop, design and deliver solutions to asset owners such as local authorities, highways agencies, hospitals, power companies New business development role, you will be targeted to win circa £2m of new projects, could be approx. 20 projects although the two largest client s in Scotland are worth more than £10m Time will be split between asset owners, structural and civil consultants as well as main contractors and D&B contractors Ideally you will have the ability to leverage some existing contacts within one of the aforementioned industry sectors Working in a buddy system with the dedicated Scotland Preconstruction Manager, who is responsible for managing the Estimators Ideally working from the Glasgow office 1-2 days per week The ideal applicant will be a Business Development Manager Infrastructure Repair & Rehabilitation with: Would suit technical experience on infrastructure, highways or bridges with a willingness to get into a field sales role Open on product backgrounds if candidates have a network of contacts within the aforementioned sectors e.g. open to tool hire, anchors, mechanical systems, fixings, concrete, specialist contracting services such as; welding, testing and inspections Would suit technical experience on infrastructure, highways or bridges with a willingness to get into a field sales role Ideally have a proven field sales track record within one of the following sectors ; infrastructure, bridges, highways, transport, water, energy, industrial, utilities (hydro, wind etc.) or commercial Specific knowledge of structural repair systems, jacking, post-tensioning, expansion joints, bridge bearing replacement and cathodic protection solutions not essential but may be useful Ideally with a breath of field sales experience across asset owners, consultants and main contractors Strong work ethic and happy to entertain clients when needed Degree in civil engineering or structuring engineering may be beneficial Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Civil Engineering, Structural Engineering, Infrastructure, Concrete Repairs, Jacking, Post-Tensioning, Expansion Joints, Bridge Bearing Replacement, Cathodic Protection, Structural Surveys and Inspection, Local Authorities, Hospitals, Power Companies, Transport, Utilities, Highways, Water, Energy, Industrial, Welding, Commercial, Main Contractors, D&B Contractors, Structural Engineers, Civil Engineers, Specifiers, Consultants and Asset Owners
Systems V&V Engineering Specialist Initial 12-months Bristol or Stevenage, 2 days onsite per week SC (can start on BPSS) up to 85ph, UMB, inside IR35 Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintained for deliveries. System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate. Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues. Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards. Support departmental strategy and support the department head with recruitment of the right people into the team. Proven ability to influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Essential Skills & Qualifications Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline. Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators). Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors. Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance. Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody would be desirable, but training will be provided where needed. Experience in DfT and testability. RF / Microwave systems knowledge would be desirable.
May 15, 2026
Contractor
Systems V&V Engineering Specialist Initial 12-months Bristol or Stevenage, 2 days onsite per week SC (can start on BPSS) up to 85ph, UMB, inside IR35 Our Test & Evaluation team are looking for a V&V Systems Engineering Specialist to operate with a high-level of technical responsibility for the entire lifecycle of our product, ranging from design and development to qualification and deployment. A specialist will bridge the gap between design and production, ensuring that complex, high-reliability systems meet our requirements. Key Responsibilities Test Strategy & Development: Defining test requirements, creating test plans, scoping front end activities with the customer ensuring that requirements are met and understood with the best efficiency maintained for deliveries. System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate. Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues. Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards. Support departmental strategy and support the department head with recruitment of the right people into the team. Proven ability to influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Essential Skills & Qualifications Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline. Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators). Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors. Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance. Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody would be desirable, but training will be provided where needed. Experience in DfT and testability. RF / Microwave systems knowledge would be desirable.
An opportunity has arisen with my client for a Principal Thermal Engineer to join them on an initial 12-month contract. As the Principal Thermal Engineer you will play a critical role in ensuring products deliver the necessary performance against key thermal requirements. Role: Principal Thermal Engineer Pay: 50 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: SC to start, DV clearance would be beneficial, UK eyes only project Responsibilities: Take ownership for delivering packages of thermal analysis work. Provide mechanical analysis support to develop designs and deliver thermal performance evidence. Deliver analysis evidence in clear reports with firm conclusion statements. Participate in team meetings and design reviews. Manage workload against time schedules and report progress regularly to stakeholders. Responsible for dealing and collaborating with project stakeholders (internal & external). Skillset/experience required: An experienced ANSYS Mechanical user Degree qualified in a STEM subject. Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS etc.). Experience in one or more of the following areas: Carrying out studies to determine the effects of conduction, convection and radiation on the thermal response of systems; Thermal analysis of electronics; Application of MATLAB-Simulink to deliver thermal studies; Use of CFD to assess thermal behaviour; Scripting using MATLAB or Python. Ability to make quick/simple assessments to progress design activities in an efficient manner. Self-motivated and organised individuals, who are great problem solvers and can take responsibility for the delivery of work. Ability to work as a part of a multi-disciplinary team, as well as independently. Strong verbal and written communication skills with the ability to network and influence internal and external customers. Relevant experience in an equivalent or comparable industry would be advantageous. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
May 15, 2026
Contractor
An opportunity has arisen with my client for a Principal Thermal Engineer to join them on an initial 12-month contract. As the Principal Thermal Engineer you will play a critical role in ensuring products deliver the necessary performance against key thermal requirements. Role: Principal Thermal Engineer Pay: 50 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: SC to start, DV clearance would be beneficial, UK eyes only project Responsibilities: Take ownership for delivering packages of thermal analysis work. Provide mechanical analysis support to develop designs and deliver thermal performance evidence. Deliver analysis evidence in clear reports with firm conclusion statements. Participate in team meetings and design reviews. Manage workload against time schedules and report progress regularly to stakeholders. Responsible for dealing and collaborating with project stakeholders (internal & external). Skillset/experience required: An experienced ANSYS Mechanical user Degree qualified in a STEM subject. Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS etc.). Experience in one or more of the following areas: Carrying out studies to determine the effects of conduction, convection and radiation on the thermal response of systems; Thermal analysis of electronics; Application of MATLAB-Simulink to deliver thermal studies; Use of CFD to assess thermal behaviour; Scripting using MATLAB or Python. Ability to make quick/simple assessments to progress design activities in an efficient manner. Self-motivated and organised individuals, who are great problem solvers and can take responsibility for the delivery of work. Ability to work as a part of a multi-disciplinary team, as well as independently. Strong verbal and written communication skills with the ability to network and influence internal and external customers. Relevant experience in an equivalent or comparable industry would be advantageous. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
We are seeking an experienced and motivated Project Runner to lead and coordinate construction and refurbishment projects through the full range of the RIBA Plan of Work stages (0 7), from initial inception through to completion, handover and post-occupancy review. The role will primarily involve the delivery of small to medium-scale refurbishment, alteration and improvement projects, typically ranging in value from approximately £5K to £500K, although projects outside of this range may occasionally arise. The successful candidate will act as the day-to-day project lead, managing projects on behalf of the client department and ensuring that schemes are developed, procured and delivered in accordance with programme, budget, statutory requirements and quality expectations. Key Responsibilities Lead projects through all RIBA stages from feasibility through to completion and final account. Liaise directly with client departments to establish, develop and refine project briefs, objectives and operational requirements. Work collaboratively with the in-house Quantity Surveying team to establish project budgets, cost plans and procurement strategies. Assist in the appointment and coordination of external consultants and specialist advisors where required through appropriate procurement processes, including:Principal Designer (CDM Regulations)Building Regulations Principal DesignerStructural EngineersMechanical & Electrical ConsultantsSpecialist Surveyors and DesignersUndertake site visits, surveys and investigations to inform design development. Prepare and develop:Feasibility layoutsPlanning and Building Regulations drawings Tender drawings Construction and working drawing packages Assembly and detailing drawingsProduce specifications using NBS or equivalent specification systems. Utilise existing asset management information, survey data and record drawings in the preparation of project documentation. Coordinate and manage the design process to ensure compliance with: Building Regulations Planning requirements CDM Regulations Relevant British Standards and industry guidance Internal client standards and procedures Support tendering activities in conjunction with the Quantity Surveying team, including responding to tender queries and reviewing contractor submissions. Administer and monitor construction works on site, including: Chairing progress meetings Undertaking site inspections Monitoring quality and progress Reviewing contractor information Managing design changes and technical queries Assist with project reporting, risk management and programme monitoring throughout the project lifecycle. Ensure accurate project records and documentation are maintained throughout delivery. Support handover, defects management and post-completion activities. Essential Requirements Experience of delivering construction or refurbishment projects through multiple RIBA Plan of Work stages. Experience preparing technical drawings and construction information using CAD software. Good understanding of construction detailing, building technology and refurbishment works. Experience producing specifications using NBS or similar systems. Understanding of procurement and contract administration processes. Working knowledge of: Building Regulations Planning processes CDM Regulations Health & Safety requirements in construction Ability to coordinate multiple stakeholders and consultants effectively. Strong organisational and communication skills. Ability to manage workload across multiple projects simultaneously. Competent in Microsoft Office applications and project administration. Full UK driving licence and ability to attend sites across the district as required. Support Structure The successful candidate will work closely with an established in-house Quantity Surveying team who will provide support in relation to: Cost planning and cost control Procurement and tendering Contract administration support Financial reporting and valuations Technical and managerial support will also be available from the wider Design Services team and external specialist consultants where required
May 15, 2026
Contractor
We are seeking an experienced and motivated Project Runner to lead and coordinate construction and refurbishment projects through the full range of the RIBA Plan of Work stages (0 7), from initial inception through to completion, handover and post-occupancy review. The role will primarily involve the delivery of small to medium-scale refurbishment, alteration and improvement projects, typically ranging in value from approximately £5K to £500K, although projects outside of this range may occasionally arise. The successful candidate will act as the day-to-day project lead, managing projects on behalf of the client department and ensuring that schemes are developed, procured and delivered in accordance with programme, budget, statutory requirements and quality expectations. Key Responsibilities Lead projects through all RIBA stages from feasibility through to completion and final account. Liaise directly with client departments to establish, develop and refine project briefs, objectives and operational requirements. Work collaboratively with the in-house Quantity Surveying team to establish project budgets, cost plans and procurement strategies. Assist in the appointment and coordination of external consultants and specialist advisors where required through appropriate procurement processes, including:Principal Designer (CDM Regulations)Building Regulations Principal DesignerStructural EngineersMechanical & Electrical ConsultantsSpecialist Surveyors and DesignersUndertake site visits, surveys and investigations to inform design development. Prepare and develop:Feasibility layoutsPlanning and Building Regulations drawings Tender drawings Construction and working drawing packages Assembly and detailing drawingsProduce specifications using NBS or equivalent specification systems. Utilise existing asset management information, survey data and record drawings in the preparation of project documentation. Coordinate and manage the design process to ensure compliance with: Building Regulations Planning requirements CDM Regulations Relevant British Standards and industry guidance Internal client standards and procedures Support tendering activities in conjunction with the Quantity Surveying team, including responding to tender queries and reviewing contractor submissions. Administer and monitor construction works on site, including: Chairing progress meetings Undertaking site inspections Monitoring quality and progress Reviewing contractor information Managing design changes and technical queries Assist with project reporting, risk management and programme monitoring throughout the project lifecycle. Ensure accurate project records and documentation are maintained throughout delivery. Support handover, defects management and post-completion activities. Essential Requirements Experience of delivering construction or refurbishment projects through multiple RIBA Plan of Work stages. Experience preparing technical drawings and construction information using CAD software. Good understanding of construction detailing, building technology and refurbishment works. Experience producing specifications using NBS or similar systems. Understanding of procurement and contract administration processes. Working knowledge of: Building Regulations Planning processes CDM Regulations Health & Safety requirements in construction Ability to coordinate multiple stakeholders and consultants effectively. Strong organisational and communication skills. Ability to manage workload across multiple projects simultaneously. Competent in Microsoft Office applications and project administration. Full UK driving licence and ability to attend sites across the district as required. Support Structure The successful candidate will work closely with an established in-house Quantity Surveying team who will provide support in relation to: Cost planning and cost control Procurement and tendering Contract administration support Financial reporting and valuations Technical and managerial support will also be available from the wider Design Services team and external specialist consultants where required
Contract position - Outside IR35 Hybrid working Key Responsibilities: Designing, testing, and analysing parts of the Diesel Fuel Injection Equipment (FiE) system Engaging in discussions with customers, understanding customer evaluations, and presenting results Conducting component testing of injector pumps and rails Performing detailed analysis, collaborating with the hardware design team, and reporting findings to customers Providing customer support functions across Europe with small dedicated teams Supporting system teams in performance aspects such as rail pressure and injector calibration Ensuring component design and customer utilisation meet performance and life requirements Job Requirements: Experience in Mechanical Engineering within Automotive, Off-Highway, or Aviation sectors Understanding of Design Life Cycle in related fields Experience in validation, testing, and reporting Ability to work under pressure and deliver high-quality outcomes Strong problem-solving skills and attention to detail Effective communication and collaboration abilities About the Role: We are responsible for the design, validation, and productionisation of FiE components for customers throughout Europe. Our Hardware/Component Engineers ensuring component design and usage align with customer requirements This role provides an opportunity to experience product design, simulation, and testing. It involves iterating designs as customers develop their engines, contributing to change point analysis, investigating returned components, and demonstrating confidence in releasing parts to production. If you are an experienced Hardware Engineer eager to contribute to innovative automotive solutions, we encourage you to apply now and be part of our client's dynamic team.
May 15, 2026
Contractor
Contract position - Outside IR35 Hybrid working Key Responsibilities: Designing, testing, and analysing parts of the Diesel Fuel Injection Equipment (FiE) system Engaging in discussions with customers, understanding customer evaluations, and presenting results Conducting component testing of injector pumps and rails Performing detailed analysis, collaborating with the hardware design team, and reporting findings to customers Providing customer support functions across Europe with small dedicated teams Supporting system teams in performance aspects such as rail pressure and injector calibration Ensuring component design and customer utilisation meet performance and life requirements Job Requirements: Experience in Mechanical Engineering within Automotive, Off-Highway, or Aviation sectors Understanding of Design Life Cycle in related fields Experience in validation, testing, and reporting Ability to work under pressure and deliver high-quality outcomes Strong problem-solving skills and attention to detail Effective communication and collaboration abilities About the Role: We are responsible for the design, validation, and productionisation of FiE components for customers throughout Europe. Our Hardware/Component Engineers ensuring component design and usage align with customer requirements This role provides an opportunity to experience product design, simulation, and testing. It involves iterating designs as customers develop their engines, contributing to change point analysis, investigating returned components, and demonstrating confidence in releasing parts to production. If you are an experienced Hardware Engineer eager to contribute to innovative automotive solutions, we encourage you to apply now and be part of our client's dynamic team.
Mechanical Design Engineer - Special Projects (DV) Bedfordshire Permanent Full?time (37.5 hrs/week) 4 day working week (Mon-Thurs) with flexible hours Developed Vetting (DV) required The Opportunity An exciting opportunity has arisen for an experienced Mechanical Design Engineer to join a Special Projects engineering team delivering mission critical solutions within the UK defence sector. This role sits at the forefront of highly classified programmes and offers the chance to work on technically challenging designs, from concept through to prototype, test and delivery , in a secure, collaborative environment. If you thrive on complex engineering problems, enjoy working with cutting-edge technology, and are comfortable operating at a high security classification, this role offers genuine technical depth and long?term career development. What You'll Be Working On As a Mechanical Design Engineer, you will be responsible for the full engineering lifecycle, including: Developing innovative, robust mechanical design solutions from requirements and design briefs Producing concept and detailed designs using CREO Parametric CAD Creating supporting calculations and analysis to justify design decisions Designing high-integrity components, complex mechanisms and linkages Defining and specifying electrical interfaces for mechanical sub-systems Collaborating closely with Subject Matter Experts and Design Authorities Supporting drawing production and configuration control using Windchill PDM Preparing and presenting design review packs to senior stakeholders Supporting prototype manufacture, assembly and supplier engagement Leading and participating in physical testing and design proving Ensuring compliance with relevant standards, safety requirements and legislation What We're Looking For Essential: Ability to work in the UK without restriction DV clearance held or willingness to enter DV vetting immediately Sole UK nationality (due to the nature of the work) Proven experience in mechanical sub-system and component design Strong experience with CREO CAD and Windchill PDM Knowledge of complex mechanism design principles Ability to perform basic structural and kinematic calculations Excellent attention to detail and high-quality technical documentation skills Experience delivering designs for harsh or demanding environments Highly desirable: Background in Defence, Aerospace or Space sectors Experience specifying materials, treatments and finishes for high-performance products Experience designing mechanical systems with integrated electrical interfaces Security & Working Arrangements BPSS required to start; DV required for the role (support provided through the process if not already held) 100% onsite working due to security requirements Long-term, secure programmes with strong investment in engineering capability What's On Offer Competitive salary Annual bonus scheme Comprehensive benefits package 4-day working week supporting excellent work/life balance The opportunity to work on high-impact, highly classified defence projects Interested? If you're a Mechanical Design Engineer with strong defence, aerospace or space experience - and the ability to operate at DV level - we'd like to hear from you. Apply directly or message for a confidential discussion
May 15, 2026
Full time
Mechanical Design Engineer - Special Projects (DV) Bedfordshire Permanent Full?time (37.5 hrs/week) 4 day working week (Mon-Thurs) with flexible hours Developed Vetting (DV) required The Opportunity An exciting opportunity has arisen for an experienced Mechanical Design Engineer to join a Special Projects engineering team delivering mission critical solutions within the UK defence sector. This role sits at the forefront of highly classified programmes and offers the chance to work on technically challenging designs, from concept through to prototype, test and delivery , in a secure, collaborative environment. If you thrive on complex engineering problems, enjoy working with cutting-edge technology, and are comfortable operating at a high security classification, this role offers genuine technical depth and long?term career development. What You'll Be Working On As a Mechanical Design Engineer, you will be responsible for the full engineering lifecycle, including: Developing innovative, robust mechanical design solutions from requirements and design briefs Producing concept and detailed designs using CREO Parametric CAD Creating supporting calculations and analysis to justify design decisions Designing high-integrity components, complex mechanisms and linkages Defining and specifying electrical interfaces for mechanical sub-systems Collaborating closely with Subject Matter Experts and Design Authorities Supporting drawing production and configuration control using Windchill PDM Preparing and presenting design review packs to senior stakeholders Supporting prototype manufacture, assembly and supplier engagement Leading and participating in physical testing and design proving Ensuring compliance with relevant standards, safety requirements and legislation What We're Looking For Essential: Ability to work in the UK without restriction DV clearance held or willingness to enter DV vetting immediately Sole UK nationality (due to the nature of the work) Proven experience in mechanical sub-system and component design Strong experience with CREO CAD and Windchill PDM Knowledge of complex mechanism design principles Ability to perform basic structural and kinematic calculations Excellent attention to detail and high-quality technical documentation skills Experience delivering designs for harsh or demanding environments Highly desirable: Background in Defence, Aerospace or Space sectors Experience specifying materials, treatments and finishes for high-performance products Experience designing mechanical systems with integrated electrical interfaces Security & Working Arrangements BPSS required to start; DV required for the role (support provided through the process if not already held) 100% onsite working due to security requirements Long-term, secure programmes with strong investment in engineering capability What's On Offer Competitive salary Annual bonus scheme Comprehensive benefits package 4-day working week supporting excellent work/life balance The opportunity to work on high-impact, highly classified defence projects Interested? If you're a Mechanical Design Engineer with strong defence, aerospace or space experience - and the ability to operate at DV level - we'd like to hear from you. Apply directly or message for a confidential discussion
Mechanical Design Engineer Are you an experienced Mechanical Design Engineer looking for a new role? Do you have a strong background in designing conveyors and material handling equipment using SolidWorks? If so, this opportunity could be ideal for you. Our client, a well-established engineering company, is looking for a skilled and motivated Mechanical Design Engineer to join their team in Lincolnshire. The successful candidate will bring strong 3D design experience, a practical understanding of manufacturing processes, and the ability to deliver robust engineering solutions. Mechanical Design Engineer Permanent positionSalary: £40,000 - £50,000 (DOE)Monday to FridayLincolnshire Mechanical Design Engineer Job Description • Design and develop conveyors and material handling equipment• Produce detailed 3D models and engineering drawings using SolidWorks• Work closely with manufacturing teams to ensure designs are practical and cost-effective• Support projects from initial concept through to installation and commissioning• Carry out design calculations and ensure compliance with relevant standards• Liaise with internal teams and clients to meet project requirements and deadlines• Support continuous improvement of design processes and product development• Provide technical support during build and installation phases Mechanical Design Engineer Essential Experience / Skills / Qualifications • Proven experience as a Mechanical Design Engineer• Strong proficiency in SolidWorks• Experience designing conveyors, handling systems, or similar machinery• Good understanding of manufacturing processes and materials• Ability to work independently and as part of a team• Strong problem-solving and communication skills• Full UK driving licence (desirable) If you feel you're a good fit for this position, please click 'apply'.
May 15, 2026
Full time
Mechanical Design Engineer Are you an experienced Mechanical Design Engineer looking for a new role? Do you have a strong background in designing conveyors and material handling equipment using SolidWorks? If so, this opportunity could be ideal for you. Our client, a well-established engineering company, is looking for a skilled and motivated Mechanical Design Engineer to join their team in Lincolnshire. The successful candidate will bring strong 3D design experience, a practical understanding of manufacturing processes, and the ability to deliver robust engineering solutions. Mechanical Design Engineer Permanent positionSalary: £40,000 - £50,000 (DOE)Monday to FridayLincolnshire Mechanical Design Engineer Job Description • Design and develop conveyors and material handling equipment• Produce detailed 3D models and engineering drawings using SolidWorks• Work closely with manufacturing teams to ensure designs are practical and cost-effective• Support projects from initial concept through to installation and commissioning• Carry out design calculations and ensure compliance with relevant standards• Liaise with internal teams and clients to meet project requirements and deadlines• Support continuous improvement of design processes and product development• Provide technical support during build and installation phases Mechanical Design Engineer Essential Experience / Skills / Qualifications • Proven experience as a Mechanical Design Engineer• Strong proficiency in SolidWorks• Experience designing conveyors, handling systems, or similar machinery• Good understanding of manufacturing processes and materials• Ability to work independently and as part of a team• Strong problem-solving and communication skills• Full UK driving licence (desirable) If you feel you're a good fit for this position, please click 'apply'.
Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Do you have experience carrying out thermal analysis of electronics? Do you have experience with MATLAB/Simulink? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Principal Thermal Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Take ownership of delivering packages of thermal analysis work Provide mechanical analysis support to develop designs and deliver thermal performance evidence Deliver analysis evidence in clear reports with firm conclusion statements Participate in team meetings and design reviews Manage workload against time schedules and report progress regularly to stakeholders Responsible for dealing and collaborating with project stakeholders (internal & external) Your skillset may include: Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS) Experience carrying out studies to determine the effects of conduction, convection, and radiation on the thermal response of systems Thermal analysis of electronics Application of MATLAB-Simulink to deliver thermal studies Use of CFD to assess thermal behaviour Scripting using MATLAB or Python If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 15, 2026
Contractor
Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Do you have experience carrying out thermal analysis of electronics? Do you have experience with MATLAB/Simulink? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Principal Thermal Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Take ownership of delivering packages of thermal analysis work Provide mechanical analysis support to develop designs and deliver thermal performance evidence Deliver analysis evidence in clear reports with firm conclusion statements Participate in team meetings and design reviews Manage workload against time schedules and report progress regularly to stakeholders Responsible for dealing and collaborating with project stakeholders (internal & external) Your skillset may include: Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS) Experience carrying out studies to determine the effects of conduction, convection, and radiation on the thermal response of systems Thermal analysis of electronics Application of MATLAB-Simulink to deliver thermal studies Use of CFD to assess thermal behaviour Scripting using MATLAB or Python If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
A leading aerospace avionics business based in Fareham is seeking a Chief Systems Engineer to provide technical leadership and act as the organisation's Technical Leader and Certification Authority representative. This is a senior engineering leadership role within a highly regulated civil aerospace environment, responsible for ensuring the airworthiness, compliance and certification of safety-critical avionics equipment supplied to global aircraft programmes. The business operates within a regulated civil aviation framework, working directly with certification authorities such as the UK CAA, EASA and FAA, delivering safety-critical avionics equipment that must meet the highest levels of regulatory compliance and technical excellence. Chief Engineer Permanent Monday to Thursday, 8:00am - 4:30pm and Friday, 8:00am - 1:00pm Very Competitive Salary on Offer + 15% Bonus Fareham Chief Engineer Key Responsibilities Provide technical leadership across departments Act as Company Design Signatory, signing off product certification and airworthiness. Serve as the primary point of contact with the UK CAA certification manager. Ensure engineering processes comply with relevant civil aviation regulations. Review and approve certification artefacts, DDPs and compliance documentation. Oversee system lifecycle planning in accordance with civil aircraft & systems development guidance, safety-critical software, airborne electronic hardware and system safety assessment methods Ensure compliance with UK CAA regulations Oversee DO-160G environmental and EMC qualification testing. Ensure robust configuration and change control processes are maintained. Represent engineering in discussions with customers, suppliers and regulators. Chief Engineer Essential Experience / Skills / Qualifications Previous experience in avionics systems certification would be preferred Knowledge of: ED-79B, ED-12C, ED-80, ED-135, UK CAA, EASA or FAA certification processes and DO-160G qualification testing is desirable Product certification & airworthiness signatory responsibility Configuration and change control systems Strong understanding of software, hardware and mechanical integration in airborne systems. Experience signing off design certifications and approving compliance data. Able to operate autonomously while understanding commercial implications. Chief Engineer Company Benefits 15% Bonus Funded membership of a professional body Focused career development planning with opportunities to progress Pension scheme with up to 10% matching company contribution Income protection scheme Life Assurance x4 basic salary Share buying scheme 25 days holiday, plus bank holidays, with the option to buy and sell up to 5 days Service-related holiday (3 years = 1 day and increase up to max 5 days) Cash Plan or Private Medical Cover Employee Assistance Program for Health & Wellbeing Free on-site car parking Employee Referral Scheme Employee Perks - offering employees discounts on a huge variety of goods and services If you would like to find out more, please click 'apply' or contact for a confidential discussion.
May 15, 2026
Full time
A leading aerospace avionics business based in Fareham is seeking a Chief Systems Engineer to provide technical leadership and act as the organisation's Technical Leader and Certification Authority representative. This is a senior engineering leadership role within a highly regulated civil aerospace environment, responsible for ensuring the airworthiness, compliance and certification of safety-critical avionics equipment supplied to global aircraft programmes. The business operates within a regulated civil aviation framework, working directly with certification authorities such as the UK CAA, EASA and FAA, delivering safety-critical avionics equipment that must meet the highest levels of regulatory compliance and technical excellence. Chief Engineer Permanent Monday to Thursday, 8:00am - 4:30pm and Friday, 8:00am - 1:00pm Very Competitive Salary on Offer + 15% Bonus Fareham Chief Engineer Key Responsibilities Provide technical leadership across departments Act as Company Design Signatory, signing off product certification and airworthiness. Serve as the primary point of contact with the UK CAA certification manager. Ensure engineering processes comply with relevant civil aviation regulations. Review and approve certification artefacts, DDPs and compliance documentation. Oversee system lifecycle planning in accordance with civil aircraft & systems development guidance, safety-critical software, airborne electronic hardware and system safety assessment methods Ensure compliance with UK CAA regulations Oversee DO-160G environmental and EMC qualification testing. Ensure robust configuration and change control processes are maintained. Represent engineering in discussions with customers, suppliers and regulators. Chief Engineer Essential Experience / Skills / Qualifications Previous experience in avionics systems certification would be preferred Knowledge of: ED-79B, ED-12C, ED-80, ED-135, UK CAA, EASA or FAA certification processes and DO-160G qualification testing is desirable Product certification & airworthiness signatory responsibility Configuration and change control systems Strong understanding of software, hardware and mechanical integration in airborne systems. Experience signing off design certifications and approving compliance data. Able to operate autonomously while understanding commercial implications. Chief Engineer Company Benefits 15% Bonus Funded membership of a professional body Focused career development planning with opportunities to progress Pension scheme with up to 10% matching company contribution Income protection scheme Life Assurance x4 basic salary Share buying scheme 25 days holiday, plus bank holidays, with the option to buy and sell up to 5 days Service-related holiday (3 years = 1 day and increase up to max 5 days) Cash Plan or Private Medical Cover Employee Assistance Program for Health & Wellbeing Free on-site car parking Employee Referral Scheme Employee Perks - offering employees discounts on a huge variety of goods and services If you would like to find out more, please click 'apply' or contact for a confidential discussion.
Job Title: Mechanical Engineer Location: Nationwide Salary: Depends on experience. Role and Responsibility Design, develop and maintain mechanical systems, components and equipment for commercial, industrial or construction projects. Produce detailed engineering drawings, specifications and technical documentation using CAD software. Carry out calculations, simulations and performance analysis to ensure systems meet operational requirements. Collaborate with project managers, architects, electrical engineers and contractors throughout project lifecycles. Prepare mechanical designs in line with relevant UK building regulations, industry standards and health & safety legislation. Conduct feasibility studies, site inspections and technical assessments for new and existing installations. Support the delivery of HVAC, piping, plumbing, ventilation and mechanical plant systems where required. Develop cost-effective engineering solutions while maintaining quality, safety and efficiency standards. Assist in preparing project programmes, budgets and procurement specifications for mechanical packages. Review and approve technical submittals, supplier quotations and contractor proposals. Liaise with clients and stakeholders to understand project requirements and provide technical guidance. Monitor installation works on-site to ensure compliance with drawings, specifications and programme deadlines. Troubleshoot mechanical issues and provide practical solutions to minimise downtime and project delays. Conduct testing, commissioning and validation of mechanical systems and equipment. Prepare risk assessments, method statements and maintenance procedures where necessary. Ensure all mechanical systems comply with sustainability, energy efficiency and environmental standards. Support preventative maintenance strategies and asset management planning. Maintain accurate project records, reports and engineering documentation. Participate in design reviews, technical meetings and progress updates with internal and external teams. Assist junior engineers, apprentices or technicians with technical support and mentoring. Stay up to date with new technologies, engineering trends and industry best practices. Work closely with procurement teams to source suitable materials, equipment and suppliers. Ensure quality assurance procedures are followed throughout design and installation stages. Contribute to continuous improvement initiatives across engineering and operational processes. Deliver projects within agreed timelines, budgets and performance expectations. if you are interested in the role contact me.
May 15, 2026
Full time
Job Title: Mechanical Engineer Location: Nationwide Salary: Depends on experience. Role and Responsibility Design, develop and maintain mechanical systems, components and equipment for commercial, industrial or construction projects. Produce detailed engineering drawings, specifications and technical documentation using CAD software. Carry out calculations, simulations and performance analysis to ensure systems meet operational requirements. Collaborate with project managers, architects, electrical engineers and contractors throughout project lifecycles. Prepare mechanical designs in line with relevant UK building regulations, industry standards and health & safety legislation. Conduct feasibility studies, site inspections and technical assessments for new and existing installations. Support the delivery of HVAC, piping, plumbing, ventilation and mechanical plant systems where required. Develop cost-effective engineering solutions while maintaining quality, safety and efficiency standards. Assist in preparing project programmes, budgets and procurement specifications for mechanical packages. Review and approve technical submittals, supplier quotations and contractor proposals. Liaise with clients and stakeholders to understand project requirements and provide technical guidance. Monitor installation works on-site to ensure compliance with drawings, specifications and programme deadlines. Troubleshoot mechanical issues and provide practical solutions to minimise downtime and project delays. Conduct testing, commissioning and validation of mechanical systems and equipment. Prepare risk assessments, method statements and maintenance procedures where necessary. Ensure all mechanical systems comply with sustainability, energy efficiency and environmental standards. Support preventative maintenance strategies and asset management planning. Maintain accurate project records, reports and engineering documentation. Participate in design reviews, technical meetings and progress updates with internal and external teams. Assist junior engineers, apprentices or technicians with technical support and mentoring. Stay up to date with new technologies, engineering trends and industry best practices. Work closely with procurement teams to source suitable materials, equipment and suppliers. Ensure quality assurance procedures are followed throughout design and installation stages. Contribute to continuous improvement initiatives across engineering and operational processes. Deliver projects within agreed timelines, budgets and performance expectations. if you are interested in the role contact me.
Tooling Design Engineer Ampthill, Bedfordshire Contract (6 months), inside IR35, 37.5h, 4 day working week Monday to Thursday About the Role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to provide technical support to the team in the design, development and implementation of industrial tools, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, performance requirements and ensure legislative compliance is adhered to. A thorough working knowledge of CAD design tools such as CREO and Windchill is required. Design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. The Tooling Design Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Develop manufacturing tooling within any of the following technologies; NC Machining Composite layup Designing any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience A background in tooling design and experience gained from within a manufacturing environment. Broad manufacturing knowledge; industry experience with CNC machining, composites, fabrication, mechanical assembly, additive manufacturing. Ability to design new tooling, developing from initial concepts through to production release. Experience using CAD software (CREO) to generate 3D models and technical drawings. Experience using PDM software (Windchill) to manage document release and change. Ability to produce detailed drawings to BS8888. An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures. Awareness of DFM/A and PFMEA principles and practical application. Capability to derive Technical Requirements for tooling from the product requirements. Knowledge of Lean Manufacturing, Six Sigma Methodology, Quality toolset experience. Experience of preparing manufacturing BOM's and routings and manufacturing process instructions. Key personal competencies: Strong analytical skills. Good communication skills that can influence a range of audiences internally and externally in meetings at all levels. A good team player, able to liaise with other functions across the business. An independent thinker, able to take an assertive stance to enforce the key customer and quality requirements. Experience of driving change in process, behaviour and culture. Key competences: personal accountability, building relationships, planning for results, customer first, adaptability. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 15, 2026
Contractor
Tooling Design Engineer Ampthill, Bedfordshire Contract (6 months), inside IR35, 37.5h, 4 day working week Monday to Thursday About the Role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to provide technical support to the team in the design, development and implementation of industrial tools, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, performance requirements and ensure legislative compliance is adhered to. A thorough working knowledge of CAD design tools such as CREO and Windchill is required. Design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. The Tooling Design Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. Develop manufacturing tooling within any of the following technologies; NC Machining Composite layup Designing any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience A background in tooling design and experience gained from within a manufacturing environment. Broad manufacturing knowledge; industry experience with CNC machining, composites, fabrication, mechanical assembly, additive manufacturing. Ability to design new tooling, developing from initial concepts through to production release. Experience using CAD software (CREO) to generate 3D models and technical drawings. Experience using PDM software (Windchill) to manage document release and change. Ability to produce detailed drawings to BS8888. An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures. Awareness of DFM/A and PFMEA principles and practical application. Capability to derive Technical Requirements for tooling from the product requirements. Knowledge of Lean Manufacturing, Six Sigma Methodology, Quality toolset experience. Experience of preparing manufacturing BOM's and routings and manufacturing process instructions. Key personal competencies: Strong analytical skills. Good communication skills that can influence a range of audiences internally and externally in meetings at all levels. A good team player, able to liaise with other functions across the business. An independent thinker, able to take an assertive stance to enforce the key customer and quality requirements. Experience of driving change in process, behaviour and culture. Key competences: personal accountability, building relationships, planning for results, customer first, adaptability. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Tooling Design Engineer Bedfordshire Contract On-site 4-day working week (Mon-Thurs) + flexible working SC Clearance Required About the Role We're recruiting a Tooling Design Engineer to join a fast-paced Special Projects programme. This team operates at the heart of advanced defence and aerospace manufacturing, supporting complex products from early design through production and end-of-life. You'll be part of a highly capable Operations Engineering team, providing tooling and manufacturing engineering expertise across prototype, development and full-rate production programmes. This is a hands-on engineering role with genuine influence on manufacturability, quality, and cost. In return, we offer an exciting technical challenge, exposure to cutting edge defence programmes, and an excellent work/life balance built around a four day working week. What You'll Be Doing Design and develop manufacturing tooling, jigs, fixtures and machine attachments for production and experimental use Support tooling solutions across NC machining, composite lay up and fabrication processes Take tooling designs from concept through detailed design to production release Create technical requirement specifications, detailed drawings and process instructions Produce manufacturing BOMs and routings to support efficient build Apply DFM/A and PFMEA principles to reduce cost and improve yield Actively contribute to Mission Directed Work Team (MDWT Level 1 & 2) meetings Support capital investment activities from definition through acceptance Work closely with Industrial Engineering, Production Engineering and Operations teams Drive a right first time quality mindset and continuous improvement culture What We're Looking For Essential Experience & Skills Background in tooling design within a manufacturing environment Broad manufacturing knowledge including CNC machining, composites, fabrication, mechanical assembly or additive manufacturing Strong CAD experience using CREO, producing 3D models and detailed technical drawings Experience managing data and change control using Windchill (or similar PDM tools) Ability to produce drawings to BS8888 Solid understanding of GD&T, including datum structures and key characteristics Experience creating manufacturing instructions, BOMs and routings Ability to derive tooling requirements directly from product requirements Desirable Knowledge of Lean Manufacturing and Six Sigma tools Experience supporting production environments in regulated or safety critical industries Key Personal Competencies Strong analytical and problem solving skills Confident communicator who can influence stakeholders at all levels Collaborative team player with the ability to work across functions Independent thinker with the confidence to challenge on quality and customer requirements Proven experience driving process, behavioural or cultural improvement Security Clearance SC clearance required to start Candidates must be eligible to hold UK security clearance Why Join? 4 day working week (Mon-Thurs) supporting work/life balance Exposure to high profile, technically complex defence programmes Strong focus on engineering quality, innovation and continuous improvement Opportunities for career development and progression
May 15, 2026
Contractor
Tooling Design Engineer Bedfordshire Contract On-site 4-day working week (Mon-Thurs) + flexible working SC Clearance Required About the Role We're recruiting a Tooling Design Engineer to join a fast-paced Special Projects programme. This team operates at the heart of advanced defence and aerospace manufacturing, supporting complex products from early design through production and end-of-life. You'll be part of a highly capable Operations Engineering team, providing tooling and manufacturing engineering expertise across prototype, development and full-rate production programmes. This is a hands-on engineering role with genuine influence on manufacturability, quality, and cost. In return, we offer an exciting technical challenge, exposure to cutting edge defence programmes, and an excellent work/life balance built around a four day working week. What You'll Be Doing Design and develop manufacturing tooling, jigs, fixtures and machine attachments for production and experimental use Support tooling solutions across NC machining, composite lay up and fabrication processes Take tooling designs from concept through detailed design to production release Create technical requirement specifications, detailed drawings and process instructions Produce manufacturing BOMs and routings to support efficient build Apply DFM/A and PFMEA principles to reduce cost and improve yield Actively contribute to Mission Directed Work Team (MDWT Level 1 & 2) meetings Support capital investment activities from definition through acceptance Work closely with Industrial Engineering, Production Engineering and Operations teams Drive a right first time quality mindset and continuous improvement culture What We're Looking For Essential Experience & Skills Background in tooling design within a manufacturing environment Broad manufacturing knowledge including CNC machining, composites, fabrication, mechanical assembly or additive manufacturing Strong CAD experience using CREO, producing 3D models and detailed technical drawings Experience managing data and change control using Windchill (or similar PDM tools) Ability to produce drawings to BS8888 Solid understanding of GD&T, including datum structures and key characteristics Experience creating manufacturing instructions, BOMs and routings Ability to derive tooling requirements directly from product requirements Desirable Knowledge of Lean Manufacturing and Six Sigma tools Experience supporting production environments in regulated or safety critical industries Key Personal Competencies Strong analytical and problem solving skills Confident communicator who can influence stakeholders at all levels Collaborative team player with the ability to work across functions Independent thinker with the confidence to challenge on quality and customer requirements Proven experience driving process, behavioural or cultural improvement Security Clearance SC clearance required to start Candidates must be eligible to hold UK security clearance Why Join? 4 day working week (Mon-Thurs) supporting work/life balance Exposure to high profile, technically complex defence programmes Strong focus on engineering quality, innovation and continuous improvement Opportunities for career development and progression
Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title :CNC/Manual Mate Grinder (Nights) Reporting To: Team Leader Parts Generation Work Schedule: Onsite - Wolverhampton, GBRAt Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience operating, setting Manual Studer machines S20/RM250 and operating/ setting CNC (Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual land grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes.Night shift (includes a generous shift allowance; note: allowance is not paid during the training period ) Key Skills and experience: A recognised engineering apprenticeship Mate grinding experience required Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing toleranceThis role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit . In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog - Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. To request removal of your details, please contact us at for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.
May 15, 2026
Full time
Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title :CNC/Manual Mate Grinder (Nights) Reporting To: Team Leader Parts Generation Work Schedule: Onsite - Wolverhampton, GBRAt Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience operating, setting Manual Studer machines S20/RM250 and operating/ setting CNC (Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual land grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes.Night shift (includes a generous shift allowance; note: allowance is not paid during the training period ) Key Skills and experience: A recognised engineering apprenticeship Mate grinding experience required Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing toleranceThis role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit . In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog - Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. To request removal of your details, please contact us at for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.
Working for Waukesha Bearings, a part of Dover Precision Components, as a Skilled CNC Operator you will be part of a fully integrated Computer Aided Manufacturing facility, utilising CNC machining centres for turning, milling and grinding operations to produce customised designs from a variety of steel grades, copper, brass, aluminium and bronze. The facility has a broad range of multi-axis machine tools, lathes, mills, grinders and associated equipment, The workload being a high-mix of customised fluid-film bearings, seals and isolators with typical applications in turbo and industrial machinery, where we are supplying customers throughout Europe and further afield. Annual Salaries: 37 hour working week, Monday to Friday. Permanent Employment Contracts. £44,919.62 for weekly rotating shift pattern of early (6am) and backshifts (2pm) OR; £52,452.37 for working on night shift. These rates are inclusive of shift premium. Additional benefits inc. productivity bonuses, employer pension contrib. up to 13%, life insurance and 25 days holiday. Plus, attractive overtime rates. What You Will Bring Time-served apprenticeship in a machining discipline or SVQ/NVQ level 3 or HNC in Mechanical Engineering A minimum of 5 years' experience operating CNC machine tools within a lean-manufacturing work environment Established milling, grinding or turning experience utilising multi-axis machine tools, ideally Correa and/or Doosan or similar Experience working with machine control systems such as Fanuc, Mazak, Heidenhaim or Haas Proven ability to hold tight machining tolerances of less than .0025mm Experienced with precision inspection equipment including, but not limited to, micrometres, callipers, height gauges and bore gauges Ideally with experience in the power generation, oil & gas, aerospace or similar environment What You Will Do Read process sheets, blueprints and sketches of part to determine machining to be done, dimensional specifications, set up and operating requirements Locate and download programs from a DNC storage system Interpret work instructions, identify, select and install proper tooling for operations being performed Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminium and bronze Read, understand, edit or write complete programs Intuitively understand capabilities of tooling and machinery Understand applicable quality systems and perform necessary quality inspections Apply principles of Lean Manufacturing to reduced setup times and improve productivity Visually inspects final components Perform boxing of parts to include cleaning, oiling, wrapping and boxing the final product for shipment Perform cleaning, fitting, filing, tapping, reaming, blending, polishing and aligning to ensure free action of movable parts and operating requirements Use precision measuring instruments and gauging devices and performs various quality inspection type procedures to include dimensional verification Properly identify components after assembly/manufacture DOVER PRECISION COMPONENTS Dover Precision Components is part of Dover Corporation's Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, THEN Attention Applicants : If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Fraudulent Recruiting Disclaimer: Dover Corporation and our affiliated operating companies want to alert applicants to internet job posting fraud, where parties posing as Dover employees, recruiters, or other agents, try to engage with online candidates in an attempt to steal personal and/or financial information. We do not endorse or engage in any recruitment practices that involve payment or personal information outside of our official application and hiring process. Please verify the authenticity of an invitation to apply for a job, or for a job offer by contacting us directly through our Dover and affiliated operating company websites at . To learn how you can protect yourself, review our Recruitment Fraud Notice on our careers site .
May 15, 2026
Full time
Working for Waukesha Bearings, a part of Dover Precision Components, as a Skilled CNC Operator you will be part of a fully integrated Computer Aided Manufacturing facility, utilising CNC machining centres for turning, milling and grinding operations to produce customised designs from a variety of steel grades, copper, brass, aluminium and bronze. The facility has a broad range of multi-axis machine tools, lathes, mills, grinders and associated equipment, The workload being a high-mix of customised fluid-film bearings, seals and isolators with typical applications in turbo and industrial machinery, where we are supplying customers throughout Europe and further afield. Annual Salaries: 37 hour working week, Monday to Friday. Permanent Employment Contracts. £44,919.62 for weekly rotating shift pattern of early (6am) and backshifts (2pm) OR; £52,452.37 for working on night shift. These rates are inclusive of shift premium. Additional benefits inc. productivity bonuses, employer pension contrib. up to 13%, life insurance and 25 days holiday. Plus, attractive overtime rates. What You Will Bring Time-served apprenticeship in a machining discipline or SVQ/NVQ level 3 or HNC in Mechanical Engineering A minimum of 5 years' experience operating CNC machine tools within a lean-manufacturing work environment Established milling, grinding or turning experience utilising multi-axis machine tools, ideally Correa and/or Doosan or similar Experience working with machine control systems such as Fanuc, Mazak, Heidenhaim or Haas Proven ability to hold tight machining tolerances of less than .0025mm Experienced with precision inspection equipment including, but not limited to, micrometres, callipers, height gauges and bore gauges Ideally with experience in the power generation, oil & gas, aerospace or similar environment What You Will Do Read process sheets, blueprints and sketches of part to determine machining to be done, dimensional specifications, set up and operating requirements Locate and download programs from a DNC storage system Interpret work instructions, identify, select and install proper tooling for operations being performed Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminium and bronze Read, understand, edit or write complete programs Intuitively understand capabilities of tooling and machinery Understand applicable quality systems and perform necessary quality inspections Apply principles of Lean Manufacturing to reduced setup times and improve productivity Visually inspects final components Perform boxing of parts to include cleaning, oiling, wrapping and boxing the final product for shipment Perform cleaning, fitting, filing, tapping, reaming, blending, polishing and aligning to ensure free action of movable parts and operating requirements Use precision measuring instruments and gauging devices and performs various quality inspection type procedures to include dimensional verification Properly identify components after assembly/manufacture DOVER PRECISION COMPONENTS Dover Precision Components is part of Dover Corporation's Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, THEN Attention Applicants : If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Fraudulent Recruiting Disclaimer: Dover Corporation and our affiliated operating companies want to alert applicants to internet job posting fraud, where parties posing as Dover employees, recruiters, or other agents, try to engage with online candidates in an attempt to steal personal and/or financial information. We do not endorse or engage in any recruitment practices that involve payment or personal information outside of our official application and hiring process. Please verify the authenticity of an invitation to apply for a job, or for a job offer by contacting us directly through our Dover and affiliated operating company websites at . To learn how you can protect yourself, review our Recruitment Fraud Notice on our careers site .
