Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 01, 2026
Contractor
Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Electrical Design Engineers - Aerospace Projects Location: Bristol or Runcorn, Hybrid Working Contract Type: Inside IR35 Join the team shaping the future of aerospace! We're seeking Electrical Design Engineers to work on cutting-edge projects like BAE Tempest and Typhoon on an initial 6 month contract. What You'll Do: Design electrical wiring using Catia V5 and NX 3D modelling & CAD installation analysis of looms/harnesses CATIA Work Bench Cable routing, draughting & BoM compilation Circuit design with fusing & protection strategies Toolsets: Catia V5, NX, Teamcenter What We're Looking For: Aerospace experience preferred, but Engineers with Automotive experience are most welcome to apply Strong electrical design & CAD expertise Detail-driven, collaborative mindset Why Apply? Work on next-gen aircraft programs Flexible hybrid model Be part of a world-class engineering team Apply now and help shape the future of flight! This vacancy is being advertised by Belcan
Apr 30, 2026
Contractor
Electrical Design Engineers - Aerospace Projects Location: Bristol or Runcorn, Hybrid Working Contract Type: Inside IR35 Join the team shaping the future of aerospace! We're seeking Electrical Design Engineers to work on cutting-edge projects like BAE Tempest and Typhoon on an initial 6 month contract. What You'll Do: Design electrical wiring using Catia V5 and NX 3D modelling & CAD installation analysis of looms/harnesses CATIA Work Bench Cable routing, draughting & BoM compilation Circuit design with fusing & protection strategies Toolsets: Catia V5, NX, Teamcenter What We're Looking For: Aerospace experience preferred, but Engineers with Automotive experience are most welcome to apply Strong electrical design & CAD expertise Detail-driven, collaborative mindset Why Apply? Work on next-gen aircraft programs Flexible hybrid model Be part of a world-class engineering team Apply now and help shape the future of flight! This vacancy is being advertised by Belcan
Propulsion Engineer - (Senior/Lead) Salary: DOE Full-time, permanent We are working an organisation focuses on developing dependable, low-cost autonomous aircraft solutions designed to deliver long-range logistics and support where infrastructure is limited or unavailable. As a Propulsion Engineer you will be working on a self-flying cargo aircraft with integrated autopilot and mission control software, is in operation across various industries that require dependable, heavy-lift, long-range unmanned aerial systems (UAS). This role is based in Fareham. Requirements of a Propulsion Engineer Lead the design, development, and integration of propulsion systems for advanced UAV platforms. This role is responsible for ensuring that engines, powertrains, and associated subsystems deliver safe, efficient, and reliable performance across all flight conditions. You will play a pivotal role in defining propulsion architectures and ensuring seamless integration between the airframe, power, and control systems, supporting the end-to-end introduction of new propulsion designs into production and operation. Lead the design and integration of propulsion systems, including engine installation, vibration isolation, cooling, exhaust, and power transmission. Develop and maintain propulsion system requirements and interface definitions with airframe, fuel, electrical, and control systems. Support the creation and execution of test plans, and participate in ground and flight testing to verify propulsion system performance. Collaborate with avionics, airframe, manufacturing, and flight test teams to ensure successful integration and validation. Maintain relevant technical and operational documentation (maintenance programmes, inspection checklists, compliance records, etc.). Conduct or coordinate analytical assessments and simulations (structural, thermal, vibration) to validate designs. Provide technical leadership and mentorship to junior engineers, contributing to the team's capability and knowledge base. Ensure safe working practices and uphold the organisation's health and safety standards. Work in alignment with company values, policies, and procedures. Qualifications, Skills & Experience for a Propulsion Engineer Degree in Mechanical, Aerospace, or related Engineering discipline (or equivalent). Experience in propulsion system or engine integration design, preferably within aerospace, UAV, or high-performance vehicle sectors. Strong understanding of mechanical design principles for rotating and reciprocating machinery. Proven ability to work across multiple disciplines and manage complex integration challenges. Excellent communication, analytical, and problem-solving skills. Experience introducing and supporting new systems in production and operational environments. Familiarity with air-cooled engines, hybrid propulsion, or alternative powertrains. Background in UAV power system certification or qualification testing (desirable). Proficiency with 3D CAD software (SolidWorks preferred) and PDM systems. Experience with FEA, vibration analysis, or CFD/thermal simulation (desirable). Understanding of propulsion control and monitoring interfaces (desirable). High attention to detail with a commitment to safety and reliability. Right to work in the UK. Ability to obtain necessary security clearance.
Apr 30, 2026
Full time
Propulsion Engineer - (Senior/Lead) Salary: DOE Full-time, permanent We are working an organisation focuses on developing dependable, low-cost autonomous aircraft solutions designed to deliver long-range logistics and support where infrastructure is limited or unavailable. As a Propulsion Engineer you will be working on a self-flying cargo aircraft with integrated autopilot and mission control software, is in operation across various industries that require dependable, heavy-lift, long-range unmanned aerial systems (UAS). This role is based in Fareham. Requirements of a Propulsion Engineer Lead the design, development, and integration of propulsion systems for advanced UAV platforms. This role is responsible for ensuring that engines, powertrains, and associated subsystems deliver safe, efficient, and reliable performance across all flight conditions. You will play a pivotal role in defining propulsion architectures and ensuring seamless integration between the airframe, power, and control systems, supporting the end-to-end introduction of new propulsion designs into production and operation. Lead the design and integration of propulsion systems, including engine installation, vibration isolation, cooling, exhaust, and power transmission. Develop and maintain propulsion system requirements and interface definitions with airframe, fuel, electrical, and control systems. Support the creation and execution of test plans, and participate in ground and flight testing to verify propulsion system performance. Collaborate with avionics, airframe, manufacturing, and flight test teams to ensure successful integration and validation. Maintain relevant technical and operational documentation (maintenance programmes, inspection checklists, compliance records, etc.). Conduct or coordinate analytical assessments and simulations (structural, thermal, vibration) to validate designs. Provide technical leadership and mentorship to junior engineers, contributing to the team's capability and knowledge base. Ensure safe working practices and uphold the organisation's health and safety standards. Work in alignment with company values, policies, and procedures. Qualifications, Skills & Experience for a Propulsion Engineer Degree in Mechanical, Aerospace, or related Engineering discipline (or equivalent). Experience in propulsion system or engine integration design, preferably within aerospace, UAV, or high-performance vehicle sectors. Strong understanding of mechanical design principles for rotating and reciprocating machinery. Proven ability to work across multiple disciplines and manage complex integration challenges. Excellent communication, analytical, and problem-solving skills. Experience introducing and supporting new systems in production and operational environments. Familiarity with air-cooled engines, hybrid propulsion, or alternative powertrains. Background in UAV power system certification or qualification testing (desirable). Proficiency with 3D CAD software (SolidWorks preferred) and PDM systems. Experience with FEA, vibration analysis, or CFD/thermal simulation (desirable). Understanding of propulsion control and monitoring interfaces (desirable). High attention to detail with a commitment to safety and reliability. Right to work in the UK. Ability to obtain necessary security clearance.
Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. Since 2023, Anduril UK has experienced rapid growth, introducing world leading software first, hardware enabled systems to the UK Ministry of Defence and other government agencies. Our exemplar programme of Maritime Sentry Towers (MST) has been developed and delivered in close partnership with the UK government and sovereign British industry, fundamentally changing how border security and surveillance capabilities can be employed by UK authorities. Additionally, Anduril UK has expanded its portfolio to include the ALTIUS 600, a versatile autonomous aerial system, and Seabed Sentry, an advanced underwater surveillance platform. These systems, along with others, position Anduril UK to provide a broad range of software and software enabled hardware products to meet the UK's defence and security needs as outlined in the 2023 Integrated Review Refresh and Defence Command Paper. World leading technology like MST, ALTIUS 600, Seabed Sentry, and many of the other autonomous systems that will underpin the UK's technological future rely on modern C4 systems. These systems can integrate and fuse data across distributed systems, nodes, and networks to enable timely command decision making. Anduril's open architecture Lattice operating system is an AI powered software platform that transforms thousands of data streams into actionable information for operators at all levels. As the world enters an era of strategic competition, Anduril is committed to bringing cutting edge autonomy, AI, computer vision, and networking technology to UK defence and security personnel in months, not years. Our focus is on rapidly delivering innovative solutions that enhance the UK's defence capabilities, support its industrial strategy, and contribute to its position as a science and technology leader. ABOUT THE TEAM The Mission Software Engineering team is responsible for building, deploying, integrating, extending, and scaling Anduril's software to deliver mission critical capabilities to our customers. As the software engineers closest to Anduril customers and end users, Mission Software Engineers solve technical challenges of operational scenarios while owning the end to end delivery of winning capabilities such as Counter Intrusion, Joint All Domain Command & Control, and Counter Unmanned Aircraft Systems. ABOUT THE JOB As a Senior Software Engineer on the Connected Warfare team, you will help architect third party systems to seamlessly integrate with Anduril products while solving a wide variety of technical problems, making pragmatic engineering tradeoffs along the way. Your role sets the bar for the technical excellence our customers expect from Anduril. Above all, Mission Software Engineers are driven by a "Whatever It Takes" mindset-executing in an expedient, scalable, and pragmatic way while keeping the mission top of mind and making sound engineering decisions to deliver successful outcomes correctly, on time, and with high quality. WHAT YOU'LL DO Be a champion for Anduril capabilities within a customer environment Develop architecture and mission vignettes Iterate on core data mesh technology to make optimal use of degraded networks Develop connectors and APIs for legacy and cutting edge systems to integrate with Lattice Deploy software to non standard environments Create data flow pipelines that span horizontally and vertically across disparate networked systems and security domains REQUIRED QUALIFICATIONS Strong engineering background from industry or school, ideally in areas/fields such as Computer Science, Software Engineering, Mathematics, or Physics At least 5+ years working with a variety of programming languages such as Java, Python, C++, Rust, Go, JavaScript, etc. Experience building software solutions involving significant amounts of data processing and analysis Ability to quickly understand and navigate complex systems and established code bases Experience working in a customer / client facing role A desire to work on critical software that has a real world impact Ability to travel to client sites Eligible for SC Clearance The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top tier benefits for full time employees, including: Platinum Healthcare Benefits: For U.S. roles, we offer comprehensive medical, dental, and vision plans at little to no cost to you. For UK roles, Private Medical Insurance (PMI): Anduril will cover the full cost of the insurance premium for an employee and dependents. For AUS roles, Private health plan through Bupa: Coverage is fully subsidized by Anduril. Basic Life/AD&D and long term disability insurance 100% covered by Anduril, plus the option to purchase additional life insurance for you and your dependents. Extremely generous company holiday calendar including a holiday hiatus in December, and highly competitive PTO plans. 16 weeks of paid Caregiver & Wellness Leave to care for a family member, bond with your baby, or tend to your own medical condition. Family Planning & Parenting Support: Fertility (eg, IVF, preservation), adoption, and gestational carrier coverage with additional benefits and resources to provide support from planning to parenting. Mental Health Resources: We provide free mental health resources 24/7 including therapy, life coaching, and more. Additional work life services, such as free legal and financial support, available to you as well. A professional development stipend is available to all Andurilians. Daily Meals and Provisions: For many of our offices this means breakfast, lunch and fully stocked micro kitchens. Company funded commuter benefits available based on your region. Relocation assistance (depending on role eligibility). 401(k) retirement savings plan - both a traditional and Roth 401(k). (US roles only) Anduril is an equal opportunity employer committed to creating a diverse and inclusive workplace. The Anduril team is made up of incredibly talented and unique individuals, who together are disrupting industry norms by creating new paths towards the future of defense technology. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance. We actively encourage members of recognized minorities, women, Veterans, and those with disabilities to apply, and we work to create a welcoming and supportive environment for all applicants throughout the interview process. If you are someone passionate about working on problems that have a real world impact, we'd love to hear from you! To view Anduril's candidate data privacy policy, please visit
Apr 30, 2026
Full time
Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. Since 2023, Anduril UK has experienced rapid growth, introducing world leading software first, hardware enabled systems to the UK Ministry of Defence and other government agencies. Our exemplar programme of Maritime Sentry Towers (MST) has been developed and delivered in close partnership with the UK government and sovereign British industry, fundamentally changing how border security and surveillance capabilities can be employed by UK authorities. Additionally, Anduril UK has expanded its portfolio to include the ALTIUS 600, a versatile autonomous aerial system, and Seabed Sentry, an advanced underwater surveillance platform. These systems, along with others, position Anduril UK to provide a broad range of software and software enabled hardware products to meet the UK's defence and security needs as outlined in the 2023 Integrated Review Refresh and Defence Command Paper. World leading technology like MST, ALTIUS 600, Seabed Sentry, and many of the other autonomous systems that will underpin the UK's technological future rely on modern C4 systems. These systems can integrate and fuse data across distributed systems, nodes, and networks to enable timely command decision making. Anduril's open architecture Lattice operating system is an AI powered software platform that transforms thousands of data streams into actionable information for operators at all levels. As the world enters an era of strategic competition, Anduril is committed to bringing cutting edge autonomy, AI, computer vision, and networking technology to UK defence and security personnel in months, not years. Our focus is on rapidly delivering innovative solutions that enhance the UK's defence capabilities, support its industrial strategy, and contribute to its position as a science and technology leader. ABOUT THE TEAM The Mission Software Engineering team is responsible for building, deploying, integrating, extending, and scaling Anduril's software to deliver mission critical capabilities to our customers. As the software engineers closest to Anduril customers and end users, Mission Software Engineers solve technical challenges of operational scenarios while owning the end to end delivery of winning capabilities such as Counter Intrusion, Joint All Domain Command & Control, and Counter Unmanned Aircraft Systems. ABOUT THE JOB As a Senior Software Engineer on the Connected Warfare team, you will help architect third party systems to seamlessly integrate with Anduril products while solving a wide variety of technical problems, making pragmatic engineering tradeoffs along the way. Your role sets the bar for the technical excellence our customers expect from Anduril. Above all, Mission Software Engineers are driven by a "Whatever It Takes" mindset-executing in an expedient, scalable, and pragmatic way while keeping the mission top of mind and making sound engineering decisions to deliver successful outcomes correctly, on time, and with high quality. WHAT YOU'LL DO Be a champion for Anduril capabilities within a customer environment Develop architecture and mission vignettes Iterate on core data mesh technology to make optimal use of degraded networks Develop connectors and APIs for legacy and cutting edge systems to integrate with Lattice Deploy software to non standard environments Create data flow pipelines that span horizontally and vertically across disparate networked systems and security domains REQUIRED QUALIFICATIONS Strong engineering background from industry or school, ideally in areas/fields such as Computer Science, Software Engineering, Mathematics, or Physics At least 5+ years working with a variety of programming languages such as Java, Python, C++, Rust, Go, JavaScript, etc. Experience building software solutions involving significant amounts of data processing and analysis Ability to quickly understand and navigate complex systems and established code bases Experience working in a customer / client facing role A desire to work on critical software that has a real world impact Ability to travel to client sites Eligible for SC Clearance The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top tier benefits for full time employees, including: Platinum Healthcare Benefits: For U.S. roles, we offer comprehensive medical, dental, and vision plans at little to no cost to you. For UK roles, Private Medical Insurance (PMI): Anduril will cover the full cost of the insurance premium for an employee and dependents. For AUS roles, Private health plan through Bupa: Coverage is fully subsidized by Anduril. Basic Life/AD&D and long term disability insurance 100% covered by Anduril, plus the option to purchase additional life insurance for you and your dependents. Extremely generous company holiday calendar including a holiday hiatus in December, and highly competitive PTO plans. 16 weeks of paid Caregiver & Wellness Leave to care for a family member, bond with your baby, or tend to your own medical condition. Family Planning & Parenting Support: Fertility (eg, IVF, preservation), adoption, and gestational carrier coverage with additional benefits and resources to provide support from planning to parenting. Mental Health Resources: We provide free mental health resources 24/7 including therapy, life coaching, and more. Additional work life services, such as free legal and financial support, available to you as well. A professional development stipend is available to all Andurilians. Daily Meals and Provisions: For many of our offices this means breakfast, lunch and fully stocked micro kitchens. Company funded commuter benefits available based on your region. Relocation assistance (depending on role eligibility). 401(k) retirement savings plan - both a traditional and Roth 401(k). (US roles only) Anduril is an equal opportunity employer committed to creating a diverse and inclusive workplace. The Anduril team is made up of incredibly talented and unique individuals, who together are disrupting industry norms by creating new paths towards the future of defense technology. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance. We actively encourage members of recognized minorities, women, Veterans, and those with disabilities to apply, and we work to create a welcoming and supportive environment for all applicants throughout the interview process. If you are someone passionate about working on problems that have a real world impact, we'd love to hear from you! To view Anduril's candidate data privacy policy, please visit
Air Personnel are looking for B2 Licence Engineers for their client based in Shawbury. Fantastic Opportunity with a salary that has recently been improved! PLEASE NOTE - It is our policy to require all applicants to demonstrate they have the right to remain and to work in the UK. Description/Overall purpose of the Job The B2 Licensed Engineer is responsible for the certification of line, non-routine maintenance and repair on Airbus H135/H145 rotorcraft. Type training will be provided for a suitable candidate. The Main Responsibilities Of The Post Holder Will Be: Provide engineering operational support to Flight Operations. Accomplishment of maintenance inspections and repairs as directed by nominated LAE Supervisor. Work as a team leader and to high standards to ensure continued safe operation of the aircraft. Completion of maintenance, including avionic and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of avionic and electrical fitters and the certification of their work. Conduct off-aircraft avionic and electrical technical work in Av workshop as required. Also required to assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities. Knowledge and Skills: ESSENTIAL Must have thorough knowledge of helicopter avionic and electrical systems. Knowledge of specialised test equipment relating to avionic and electrical systems. Must have up to date knowledge of : CAA regulations, particularly Pt 145, Part M Continued Airworthiness Management (CAM) Flight/Airport Operations Aircraft Line Maintenance DESIRABLE Knowledge of UK Military Aviation and UK MFTS. Experience with SAP and ERP software. We require the post holder to have the following Education, Qualifications or special training: ESSENTIAL CAA Part 66 B2 Licence. DESIRABLE Type Rating and experience H135/H145. ESSENTIAL The post holder should have the following experience: 3 years experience in a certifying role. Experience of Flight Operations and Line Maintenance. DESIRABLE Experience of Airbus Helicopters products. Experience of Military Aviation. Key Performance Indicators: Maintain aircraft availability levels of >98% at Shawbury (including deployments). Other Requirements: TRAVEL Required to work shifts as part of normal working routine. Required travel between Shawbury, Valley and areas dictated by Operational requirements (Deployments on a 3 weekly cycle). Please call Michelle for further details or apply with your CV
Apr 30, 2026
Full time
Air Personnel are looking for B2 Licence Engineers for their client based in Shawbury. Fantastic Opportunity with a salary that has recently been improved! PLEASE NOTE - It is our policy to require all applicants to demonstrate they have the right to remain and to work in the UK. Description/Overall purpose of the Job The B2 Licensed Engineer is responsible for the certification of line, non-routine maintenance and repair on Airbus H135/H145 rotorcraft. Type training will be provided for a suitable candidate. The Main Responsibilities Of The Post Holder Will Be: Provide engineering operational support to Flight Operations. Accomplishment of maintenance inspections and repairs as directed by nominated LAE Supervisor. Work as a team leader and to high standards to ensure continued safe operation of the aircraft. Completion of maintenance, including avionic and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of avionic and electrical fitters and the certification of their work. Conduct off-aircraft avionic and electrical technical work in Av workshop as required. Also required to assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities. Knowledge and Skills: ESSENTIAL Must have thorough knowledge of helicopter avionic and electrical systems. Knowledge of specialised test equipment relating to avionic and electrical systems. Must have up to date knowledge of : CAA regulations, particularly Pt 145, Part M Continued Airworthiness Management (CAM) Flight/Airport Operations Aircraft Line Maintenance DESIRABLE Knowledge of UK Military Aviation and UK MFTS. Experience with SAP and ERP software. We require the post holder to have the following Education, Qualifications or special training: ESSENTIAL CAA Part 66 B2 Licence. DESIRABLE Type Rating and experience H135/H145. ESSENTIAL The post holder should have the following experience: 3 years experience in a certifying role. Experience of Flight Operations and Line Maintenance. DESIRABLE Experience of Airbus Helicopters products. Experience of Military Aviation. Key Performance Indicators: Maintain aircraft availability levels of >98% at Shawbury (including deployments). Other Requirements: TRAVEL Required to work shifts as part of normal working routine. Required travel between Shawbury, Valley and areas dictated by Operational requirements (Deployments on a 3 weekly cycle). Please call Michelle for further details or apply with your CV
Air Personnel are delighted to be supporting a client based in Kent for several licence engineers CAA-UK B1 or B2 Licensed Engineer Dash-8 Our client is a leader in international aerospace. They provide a wide range of aviation and related services to domestic and international markets. We are looking for several CAA-UK B1 or B2 Licensed engineers for positions in the UK. Shift pattern is 14 days on, 14 days off, and 21 days on, 21 days off. Hours of work will be scheduled Preferably having an initial type training on your licence. Type training can be provided if you have had hands on experience with a similar type. The purpose of the role to maintain the Dash-8 -100/200/300 aircraft Airframe & Powerplant system in a serviceable and airworthy condition. This is a permanent position and it includes scheduled deployments required to support operations. B1 Duties and Responsibilities: The Licensed Engineer, duties and responsibilities will include but is not limited to: Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment. Examine and inspect engines, airframe and other components for cracks, breaks, leaks, and wear. Assembles and installs aircraft, electrical, plumbing, mechanical, hydraulic components, and accessories, using hand tools and power tools. Services and maintaining aircraft systems by performing tasks, such as flushing systems, cleaning screens, greasing moving parts, and functional checks. Engine rigging, low and high-power runs. Report HSE hazards, incidents, near misses, and issues as per approved company procedure. Any additional duties and responsibilities may be added provided they do not conflict with those of other management personnel. Be familiar with all company processes and documents pertaining to his/her work. Commit to Environment, Health & Safety policies, and procedure. Qualifications: Unrestricted B1 Licence Minimum of 3 years experience working as a B1 Licensed Engineer, in either a line maintenance or modification/installation environment. Experience with turboprop aircraft such as Dash-8 -100/200/300 Classic aircraft or ATR 42/72 and related aircraft systems is preferred. Excellent troubleshooting and strong analytic skills. Excellent communications skills both written and oral. Innovative, flexible, and adaptable. Highly self-motived, capable of working as part of a team, as well as leading a team. Ability to work in a challenging and dynamic environment. Must possess strong interpersonal, organization, collaborative skills. Must be able to obtain a clear Criminal Record Check prior to employment. Willingness to live and work at the secondary base outside the homebase for periods of time. B2 Duties and Responsibilities: The Licensed Engineer, duties and responsibilities will include but is not limited to: Able to read, interpret and manufacture wire looms as per design drawing. Carrying out installation and testing/troubleshooting of final wire assemblies as per design drawings. Planning work schedules and drafting task procedures as per the design drawings in accordance with the required standards and procedural requirements. Report HSE hazards, incidents, near misses, and issues as per approved company procedure. Any additional duties and responsibilities may be added provided they do not conflict with those of other management personnel. Be familiar with all company processes and documents pertaining to his/her work. Commit to Environment, Health & Safety policies, and procedure. Qualifications: Unrestricted B2 Licence Minimum of 3 years experience working as a B2 Licensed Engineer, in either a line maintenance or modification/installation environment. Experience with turboprop aircraft such as Dash-8 -100/200/300 Classic aircraft or ATR 42/72 and related aircraft systems is preferred. Must have completed a recognised training for avionics work (ex-military, technical institute or have equivalent experience through program such as the International Correspondence School. Experience working on a variety of avionics equipment, such as Communication, Navigation and associated displays and management systems. Experience in installation and troubleshooting of Mission equipment, i.e. Radar, Infrared Camera, Mission Management Systems, etc, considered an asset. Innovative, flexible, and adaptable. Highly self-motived, capable of working as part of a team. Ability to work in a challenging and dynamic environment. Must possess strong interpersonal, organization, communications skills. Must be able to obtain a clear Criminal Record Check prior to employment. Willingness to live and work at the secondary base outside the homebase for periods of time. This is an excellent opportunity to part of a great team and work for a fantastic employer. Please contact Michelle for further information
Apr 30, 2026
Full time
Air Personnel are delighted to be supporting a client based in Kent for several licence engineers CAA-UK B1 or B2 Licensed Engineer Dash-8 Our client is a leader in international aerospace. They provide a wide range of aviation and related services to domestic and international markets. We are looking for several CAA-UK B1 or B2 Licensed engineers for positions in the UK. Shift pattern is 14 days on, 14 days off, and 21 days on, 21 days off. Hours of work will be scheduled Preferably having an initial type training on your licence. Type training can be provided if you have had hands on experience with a similar type. The purpose of the role to maintain the Dash-8 -100/200/300 aircraft Airframe & Powerplant system in a serviceable and airworthy condition. This is a permanent position and it includes scheduled deployments required to support operations. B1 Duties and Responsibilities: The Licensed Engineer, duties and responsibilities will include but is not limited to: Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment. Examine and inspect engines, airframe and other components for cracks, breaks, leaks, and wear. Assembles and installs aircraft, electrical, plumbing, mechanical, hydraulic components, and accessories, using hand tools and power tools. Services and maintaining aircraft systems by performing tasks, such as flushing systems, cleaning screens, greasing moving parts, and functional checks. Engine rigging, low and high-power runs. Report HSE hazards, incidents, near misses, and issues as per approved company procedure. Any additional duties and responsibilities may be added provided they do not conflict with those of other management personnel. Be familiar with all company processes and documents pertaining to his/her work. Commit to Environment, Health & Safety policies, and procedure. Qualifications: Unrestricted B1 Licence Minimum of 3 years experience working as a B1 Licensed Engineer, in either a line maintenance or modification/installation environment. Experience with turboprop aircraft such as Dash-8 -100/200/300 Classic aircraft or ATR 42/72 and related aircraft systems is preferred. Excellent troubleshooting and strong analytic skills. Excellent communications skills both written and oral. Innovative, flexible, and adaptable. Highly self-motived, capable of working as part of a team, as well as leading a team. Ability to work in a challenging and dynamic environment. Must possess strong interpersonal, organization, collaborative skills. Must be able to obtain a clear Criminal Record Check prior to employment. Willingness to live and work at the secondary base outside the homebase for periods of time. B2 Duties and Responsibilities: The Licensed Engineer, duties and responsibilities will include but is not limited to: Able to read, interpret and manufacture wire looms as per design drawing. Carrying out installation and testing/troubleshooting of final wire assemblies as per design drawings. Planning work schedules and drafting task procedures as per the design drawings in accordance with the required standards and procedural requirements. Report HSE hazards, incidents, near misses, and issues as per approved company procedure. Any additional duties and responsibilities may be added provided they do not conflict with those of other management personnel. Be familiar with all company processes and documents pertaining to his/her work. Commit to Environment, Health & Safety policies, and procedure. Qualifications: Unrestricted B2 Licence Minimum of 3 years experience working as a B2 Licensed Engineer, in either a line maintenance or modification/installation environment. Experience with turboprop aircraft such as Dash-8 -100/200/300 Classic aircraft or ATR 42/72 and related aircraft systems is preferred. Must have completed a recognised training for avionics work (ex-military, technical institute or have equivalent experience through program such as the International Correspondence School. Experience working on a variety of avionics equipment, such as Communication, Navigation and associated displays and management systems. Experience in installation and troubleshooting of Mission equipment, i.e. Radar, Infrared Camera, Mission Management Systems, etc, considered an asset. Innovative, flexible, and adaptable. Highly self-motived, capable of working as part of a team. Ability to work in a challenging and dynamic environment. Must possess strong interpersonal, organization, communications skills. Must be able to obtain a clear Criminal Record Check prior to employment. Willingness to live and work at the secondary base outside the homebase for periods of time. This is an excellent opportunity to part of a great team and work for a fantastic employer. Please contact Michelle for further information
Jonathan Lee Recruitment Ltd
Whitgreave, Staffordshire
Gas Turbine Design Engineer Aerospace A Gas Turbine Design Engineer is required to join an engineering team who are working on the design and development of light helicopters for the global market. The company design, develop and manufacture their products in the UK. With extensive financial backing and a growing order book they are seeking to grow their engineering team and require Gas Turbine Design Engineers to join their team. The Gas Turbine Design Engineer will drive current and future gas turbine engine programmes forward, working with an engineering team to develop mechanical design schemes and detailed designs of Gas Turbine parts and assemblies . What's in it for you? An excellent opportunity to work on highly innovative projects using your skills and experience to deliver iconic aircraft to the global market Exciting opportunity to work for a pioneering British owned company and share in their growing success as a fast-growing organisation Work within a smaller engineering team where outstanding performance is recognised & rewarded Highly competitive salary with extensive benefits As Gas Turbine Design Engineer - you will be required to; Develop mechanical design schemes and detailed designs of Gas Turbine parts and assemblies . Develop rotating and stationary components. Develop cast, fabricated and machined parts and assemblies. Develop schemes for controlling tolerance stacks and critical fits and clearances. Creating high quality 3D CAD models of engine parts and assemblies. Work with the production team to ensure parts and assemblies are robustly optimised for efficient manufacture. Creating high quality technical drawings & documentation. As Gas Turbine Design Engineer - you will have; BSc/BEng in Mechanical or Aerospace Engineering (or HNC/HDC with equivalent experience) Proficient in modelling parts & assemblies in 3D CAD (ideally, but not essential CREO, training provided) Proficient in producing detailed manufacturing drawings. Experience with a PLM system (ideally Windchill, training provided) Experience with typical gas turbine materials, processes and practices. Experience with small gas turbine engines is considered a major advantage. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 27, 2026
Full time
Gas Turbine Design Engineer Aerospace A Gas Turbine Design Engineer is required to join an engineering team who are working on the design and development of light helicopters for the global market. The company design, develop and manufacture their products in the UK. With extensive financial backing and a growing order book they are seeking to grow their engineering team and require Gas Turbine Design Engineers to join their team. The Gas Turbine Design Engineer will drive current and future gas turbine engine programmes forward, working with an engineering team to develop mechanical design schemes and detailed designs of Gas Turbine parts and assemblies . What's in it for you? An excellent opportunity to work on highly innovative projects using your skills and experience to deliver iconic aircraft to the global market Exciting opportunity to work for a pioneering British owned company and share in their growing success as a fast-growing organisation Work within a smaller engineering team where outstanding performance is recognised & rewarded Highly competitive salary with extensive benefits As Gas Turbine Design Engineer - you will be required to; Develop mechanical design schemes and detailed designs of Gas Turbine parts and assemblies . Develop rotating and stationary components. Develop cast, fabricated and machined parts and assemblies. Develop schemes for controlling tolerance stacks and critical fits and clearances. Creating high quality 3D CAD models of engine parts and assemblies. Work with the production team to ensure parts and assemblies are robustly optimised for efficient manufacture. Creating high quality technical drawings & documentation. As Gas Turbine Design Engineer - you will have; BSc/BEng in Mechanical or Aerospace Engineering (or HNC/HDC with equivalent experience) Proficient in modelling parts & assemblies in 3D CAD (ideally, but not essential CREO, training provided) Proficient in producing detailed manufacturing drawings. Experience with a PLM system (ideally Windchill, training provided) Experience with typical gas turbine materials, processes and practices. Experience with small gas turbine engines is considered a major advantage. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. Stress Engineers - all levels (Engineer, Senior, Lead) Cwmbran - Safran Seats Hybrid - 3 days on site Skills: Static Simulation, Hand Calculations, Certification, Altair, Radioss, HyperCrash, HyperMesh, HyperView, OptiStruct, Nastran, SimSolid, MotionSolve, Linear, Non-Linear, Dynamic, Multi-Body, FEA, Finite Element, Structural, FEM, MBD, Part21 Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Stress team across all levels from Stress Engineers, through Senior Stress Engineers to Lead Engineers at our Cwmbran site in South Wales. Your Role By joining the Stress Engineering team at Safran Seats you will be joining at team with real, fast paced development, for both you and the products and projects you will be working on. Unlike some roles across Aerospace, at Safran Seats you will see your designs and projects become reality as the project lifecycle of First and Business Class aircraft seating is constantly developed and refreshed. This is because we work directly with the Airlines to bring cutting edge, state of the art aircraft interiors to life. You will be using your Engineering core skills daily, from hand calculations to building and running FEA models of design iterations to prove and certify these impressive products. As we have roles at multiple levels don't be put off if you don't tick every box, for Senior and Lead roles we would be looking for Dynamic simulation skills but if you just have experience in Static simulation we still have roles for you. What You'll Bring Essential Engineering qualifications which provide you with the knowledge to work from 1st Principals The ability to hand calculate and work through concepts FEA experience with linear/non-linear implicit FE analysis and/or multi-body dynamic analysis and/or non-linear explicit FE analysis Experience with Solvers and other software packages like; Altair Radioss, HyperCrash, HyperMesh, HyperView, OptiStruct, MSC Nastran, SimSolid, MotionSolve Analysing structures made with high performance steels, corrosion resistant steels, aluminium and/or composite materials of both monolithic and sandwich panel construction. Desirable Knowledge of working to industry standards and codes. Knowledge of Part 25 (EASA/FAA) and Boeing / Airbus specifications. Knowledge of ACs, ARPs and Aerospace Standards. Knowledge of Aerospace Material Standards and Material or component test standards and post-processing methods (e.g. ASTMs and B-Basis calculations) Project Management experience Ability to programme VBA, Python or similar language
Apr 25, 2026
Full time
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. Stress Engineers - all levels (Engineer, Senior, Lead) Cwmbran - Safran Seats Hybrid - 3 days on site Skills: Static Simulation, Hand Calculations, Certification, Altair, Radioss, HyperCrash, HyperMesh, HyperView, OptiStruct, Nastran, SimSolid, MotionSolve, Linear, Non-Linear, Dynamic, Multi-Body, FEA, Finite Element, Structural, FEM, MBD, Part21 Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Stress team across all levels from Stress Engineers, through Senior Stress Engineers to Lead Engineers at our Cwmbran site in South Wales. Your Role By joining the Stress Engineering team at Safran Seats you will be joining at team with real, fast paced development, for both you and the products and projects you will be working on. Unlike some roles across Aerospace, at Safran Seats you will see your designs and projects become reality as the project lifecycle of First and Business Class aircraft seating is constantly developed and refreshed. This is because we work directly with the Airlines to bring cutting edge, state of the art aircraft interiors to life. You will be using your Engineering core skills daily, from hand calculations to building and running FEA models of design iterations to prove and certify these impressive products. As we have roles at multiple levels don't be put off if you don't tick every box, for Senior and Lead roles we would be looking for Dynamic simulation skills but if you just have experience in Static simulation we still have roles for you. What You'll Bring Essential Engineering qualifications which provide you with the knowledge to work from 1st Principals The ability to hand calculate and work through concepts FEA experience with linear/non-linear implicit FE analysis and/or multi-body dynamic analysis and/or non-linear explicit FE analysis Experience with Solvers and other software packages like; Altair Radioss, HyperCrash, HyperMesh, HyperView, OptiStruct, MSC Nastran, SimSolid, MotionSolve Analysing structures made with high performance steels, corrosion resistant steels, aluminium and/or composite materials of both monolithic and sandwich panel construction. Desirable Knowledge of working to industry standards and codes. Knowledge of Part 25 (EASA/FAA) and Boeing / Airbus specifications. Knowledge of ACs, ARPs and Aerospace Standards. Knowledge of Aerospace Material Standards and Material or component test standards and post-processing methods (e.g. ASTMs and B-Basis calculations) Project Management experience Ability to programme VBA, Python or similar language
MPI have a requirement for a Permanent Senior Corporate Mechanic to work on site at Stansted Airport. Rate of pay will be discussed on application Hours to be worked and shift pattern- 5, 5, 4, 4, 07.00 - 19.00 JOB PURPOSE: The Senior Corporate Aircraft Mechanic is to assist the Licensed Engineers on shift in the running of a designated zone of an aircraft maintenance input. He/she is also required to deputise for the Licensed Engineer, taking control of the zone and liaising with the Hangar supervision. ACCOUNTABILITY: To ensure that his/her work is completed to the latest technical data Work carried out meets the highest quality standard and meets regulatory standards Accountable for the organisation and timely execution of work carried by direct reports in his / her assigned area of responsibility MAIN RESPONSIBILITIES AND DUTIES: Carrying out maintenance tasks as directed by the Licensed Engineer and ensuring all relevant paperwork is correctly filled in Ensuring good housekeeping within the hangar environment and associated workshops. Paying particular attention to his/her designated work area Ensuring all activities are carried out in accordance with relevant company and Health and Safety procedures So far as quality is concerned, he is to ensure that all contract staff under their control are properly directed, have comprehensive work instructions, and adequately briefed on each activity and understand and work to the quality system as defined in part 3 (quality systems) of the company MOE The organisation and control of labour within his/her area of responsibility in conjunction with the licensed engineer The raising of work cards and requisitions as directed by the Licensed Engineer To carry out and supervise aircraft towing manoeuvres using the company tug equipment Ensuring company Vehicles, Tooling and Equipment are kept in good condition Constantly seek improvement in all activities to maximise productivity and minimise cost Communicating the progress of inputs/projects daily by written reports and daily meetings Any other duties that may be required by the Shift Supervisors, Hangar Manager and/or by the Head of Maintenance Any other duties that may from time to time be required Qualifications Prerequisites: Demonstrable experience in a similar role Preferably to have Business Jet experience. Completed a recognised aircraft mechanic apprenticeship Computer literate with experience in ERP software and Microsoft Office. Excellent organisational and communication skills Full Clean UK Driving Licence Other Specifications: Highly organised and able to prioritise work in a fast-paced environment. Maintain strict company and customer confidentiality. Attend and pass successfully all mandatory training & assessments according to the area of activity
Apr 25, 2026
Full time
MPI have a requirement for a Permanent Senior Corporate Mechanic to work on site at Stansted Airport. Rate of pay will be discussed on application Hours to be worked and shift pattern- 5, 5, 4, 4, 07.00 - 19.00 JOB PURPOSE: The Senior Corporate Aircraft Mechanic is to assist the Licensed Engineers on shift in the running of a designated zone of an aircraft maintenance input. He/she is also required to deputise for the Licensed Engineer, taking control of the zone and liaising with the Hangar supervision. ACCOUNTABILITY: To ensure that his/her work is completed to the latest technical data Work carried out meets the highest quality standard and meets regulatory standards Accountable for the organisation and timely execution of work carried by direct reports in his / her assigned area of responsibility MAIN RESPONSIBILITIES AND DUTIES: Carrying out maintenance tasks as directed by the Licensed Engineer and ensuring all relevant paperwork is correctly filled in Ensuring good housekeeping within the hangar environment and associated workshops. Paying particular attention to his/her designated work area Ensuring all activities are carried out in accordance with relevant company and Health and Safety procedures So far as quality is concerned, he is to ensure that all contract staff under their control are properly directed, have comprehensive work instructions, and adequately briefed on each activity and understand and work to the quality system as defined in part 3 (quality systems) of the company MOE The organisation and control of labour within his/her area of responsibility in conjunction with the licensed engineer The raising of work cards and requisitions as directed by the Licensed Engineer To carry out and supervise aircraft towing manoeuvres using the company tug equipment Ensuring company Vehicles, Tooling and Equipment are kept in good condition Constantly seek improvement in all activities to maximise productivity and minimise cost Communicating the progress of inputs/projects daily by written reports and daily meetings Any other duties that may be required by the Shift Supervisors, Hangar Manager and/or by the Head of Maintenance Any other duties that may from time to time be required Qualifications Prerequisites: Demonstrable experience in a similar role Preferably to have Business Jet experience. Completed a recognised aircraft mechanic apprenticeship Computer literate with experience in ERP software and Microsoft Office. Excellent organisational and communication skills Full Clean UK Driving Licence Other Specifications: Highly organised and able to prioritise work in a fast-paced environment. Maintain strict company and customer confidentiality. Attend and pass successfully all mandatory training & assessments according to the area of activity
MPI have a requirement for a Permanent Senior Corporate Mechanic to work on site at Stansted Airport. Rate of pay to be discussed on application Hours to be worked and shift pattern- 5, 5, 4, 4, 19.00-07.00 JOB PURPOSE: The Senior Corporate Aircraft Mechanic is to assist the Licensed Engineers on night shift in the running of a designated zone of an aircraft maintenance input. He/she is also required to deputise for the Licensed Engineer, taking control of the zone and liaising with the Hangar supervision. ACCOUNTABILITY: To ensure that his/her work is completed to the latest technical data Work carried out meets the highest quality standard and meets regulatory standards Accountable for the organisation and timely execution of work carried by direct reports in his / her assigned area of responsibility MAIN RESPONSIBILITIES AND DUTIES: • Carrying out maintenance tasks as directed by the Licensed Engineer and ensuring all relevant paperwork is correctly filled in • Ensuring good housekeeping within the hangar environment and associated workshops. Paying particular attention to his/her designated work area • Ensuring all activities are carried out in accordance with relevant company and Health and Safety procedures • So far as quality is concerned, he is to ensure that all contract staff under their control are properly directed, have comprehensive work instructions, and adequately briefed on each activity and understand and work to the quality system as defined in part 3 (quality systems) of the company MOE • The organisation and control of labour within his/her area of responsibility in conjunction with the licensed engineer • The raising of work cards and requisitions as directed by the Licensed Engineer • To carry out and supervise aircraft towing manoeuvres using the company tug equipment • Ensuring company Vehicles, Tooling and Equipment are kept in good condition • Constantly seek improvement in all activities to maximise productivity and minimise cost • Communicating the progress of inputs/projects daily by written reports and daily meetings • Any other duties that may be required by the Shift Supervisors, Hangar Manager and/or by the Head of Maintenance • Any other duties that may from time to time be required Authorities: • To request and provide assistance to the Hangar Supervisor / Deputy Head of Maintenance and Head of Maintenance • To request assistance from other departments Qualifications Prerequisites: • Demonstrable experience in a similar role • Preferably to have Business Jet experience but client may consider candidates who have at least 5 years trade experience • Completed a recognised aircraft mechanic apprenticeship • Computer literate with experience in ERP software and Microsoft Office. • Excellent organisational and communication skills • Full Clean UK Driving Licence Other Specifications: • Highly organised and able to prioritise work in a fast-paced environment. • Maintain strict company and customer confidentiality. • Attend and pass successfully all mandatory training & assessments according to the area of activity
Apr 24, 2026
Full time
MPI have a requirement for a Permanent Senior Corporate Mechanic to work on site at Stansted Airport. Rate of pay to be discussed on application Hours to be worked and shift pattern- 5, 5, 4, 4, 19.00-07.00 JOB PURPOSE: The Senior Corporate Aircraft Mechanic is to assist the Licensed Engineers on night shift in the running of a designated zone of an aircraft maintenance input. He/she is also required to deputise for the Licensed Engineer, taking control of the zone and liaising with the Hangar supervision. ACCOUNTABILITY: To ensure that his/her work is completed to the latest technical data Work carried out meets the highest quality standard and meets regulatory standards Accountable for the organisation and timely execution of work carried by direct reports in his / her assigned area of responsibility MAIN RESPONSIBILITIES AND DUTIES: • Carrying out maintenance tasks as directed by the Licensed Engineer and ensuring all relevant paperwork is correctly filled in • Ensuring good housekeeping within the hangar environment and associated workshops. Paying particular attention to his/her designated work area • Ensuring all activities are carried out in accordance with relevant company and Health and Safety procedures • So far as quality is concerned, he is to ensure that all contract staff under their control are properly directed, have comprehensive work instructions, and adequately briefed on each activity and understand and work to the quality system as defined in part 3 (quality systems) of the company MOE • The organisation and control of labour within his/her area of responsibility in conjunction with the licensed engineer • The raising of work cards and requisitions as directed by the Licensed Engineer • To carry out and supervise aircraft towing manoeuvres using the company tug equipment • Ensuring company Vehicles, Tooling and Equipment are kept in good condition • Constantly seek improvement in all activities to maximise productivity and minimise cost • Communicating the progress of inputs/projects daily by written reports and daily meetings • Any other duties that may be required by the Shift Supervisors, Hangar Manager and/or by the Head of Maintenance • Any other duties that may from time to time be required Authorities: • To request and provide assistance to the Hangar Supervisor / Deputy Head of Maintenance and Head of Maintenance • To request assistance from other departments Qualifications Prerequisites: • Demonstrable experience in a similar role • Preferably to have Business Jet experience but client may consider candidates who have at least 5 years trade experience • Completed a recognised aircraft mechanic apprenticeship • Computer literate with experience in ERP software and Microsoft Office. • Excellent organisational and communication skills • Full Clean UK Driving Licence Other Specifications: • Highly organised and able to prioritise work in a fast-paced environment. • Maintain strict company and customer confidentiality. • Attend and pass successfully all mandatory training & assessments according to the area of activity
Avionics Systems Engineer Location: Yeovil, 2/3 days per week on site Duration: 6 Months Rate: £60 65 Ph Ltd To carry out requirements definition, design, development, integration, test, certification (Military and Civil) and support of Avionic and Mission Systems. KEY JOB ACCOUNTABILITIES TO INCLUDE BUT NOT LIMITED TO: • Responsible for the definition, design, development, integration, testing, qualification and in-service engineering support for avionics and mission Subsystems. The role offers significant variety and could include, however, will include a number of the aspects outlined below: • Capture of requirements for Subsystems and the scheming of optimal solutions, including consideration of safety and airworthiness aspects. • Leading and undertaking detailed design and specification of Subsystems, including the preparation of requirements specifications and statements of work for vendor products or internal software developments. • Leading the execution of detailed design analysis and trade-off studies to support the evaluation of alternative solutions. Use of computer tools, prototyping, simulation and analysis techniques, where appropriate, to assess system performance. • Monitoring of internal software development / vendor engineering activities that support Aircraft and Mission System development. • Presentation of Avionic and Mission Systems aspects at aircraft Design Reviews. • Leading the planning and executing test and integration activities to support system development and qualification. • Leading the production of documentation to support airworthiness clearance and qualification of Aircraft and Mission Systems, including security and cyber considerations. • Leading the development of flight test activities for avionic and mission subsystems. • Providing support to aircraft production and clearance activities. • Leading and undertaking technology research tasks associated with avionic and mission systems. • Provide mentoring and guidance to apprentices and developing engineers. Key Skillset • Specific in-depth knowledge and experience in the design, development, integration (including rig aspects) and qualification of avionic and mission systems. • Have a detailed knowledge and understanding of the relevant airworthiness regulations (Military and Civil). • Knowledge and understanding of emerging avionic and mission sensor concepts and technologies. • Knowledge, understanding and experience of the methods, tools and techniques used for the capture of requirements, design, analysis, development and integration of avionic and mission systems. • Experience with the usage of the DOORS Requirements Management Tool (or similar) and Model Based Systems Engineering (MBSE) tools is highly desirable. • • Specific, in-depth knowledge and experience in Avionic and Mission systems, covering some of the following: o Navigation Systems; o Controls and Displays, and Human-Machine Integration; o Mission Sensor Systems, such as Radar, EW and FLIR; o Aircraft and Mission Processing Systems o Electrical Generation and Distribution Systems o Electrical Installation o Software Engineering o Air Vehicle systems o Mission Planning Systems o Human Machine Interface - HMI. o Electrical and avionic system integration. o Electromagnetic Environment and Effects E3. o Cyber and security considerations.
Apr 14, 2026
Contractor
Avionics Systems Engineer Location: Yeovil, 2/3 days per week on site Duration: 6 Months Rate: £60 65 Ph Ltd To carry out requirements definition, design, development, integration, test, certification (Military and Civil) and support of Avionic and Mission Systems. KEY JOB ACCOUNTABILITIES TO INCLUDE BUT NOT LIMITED TO: • Responsible for the definition, design, development, integration, testing, qualification and in-service engineering support for avionics and mission Subsystems. The role offers significant variety and could include, however, will include a number of the aspects outlined below: • Capture of requirements for Subsystems and the scheming of optimal solutions, including consideration of safety and airworthiness aspects. • Leading and undertaking detailed design and specification of Subsystems, including the preparation of requirements specifications and statements of work for vendor products or internal software developments. • Leading the execution of detailed design analysis and trade-off studies to support the evaluation of alternative solutions. Use of computer tools, prototyping, simulation and analysis techniques, where appropriate, to assess system performance. • Monitoring of internal software development / vendor engineering activities that support Aircraft and Mission System development. • Presentation of Avionic and Mission Systems aspects at aircraft Design Reviews. • Leading the planning and executing test and integration activities to support system development and qualification. • Leading the production of documentation to support airworthiness clearance and qualification of Aircraft and Mission Systems, including security and cyber considerations. • Leading the development of flight test activities for avionic and mission subsystems. • Providing support to aircraft production and clearance activities. • Leading and undertaking technology research tasks associated with avionic and mission systems. • Provide mentoring and guidance to apprentices and developing engineers. Key Skillset • Specific in-depth knowledge and experience in the design, development, integration (including rig aspects) and qualification of avionic and mission systems. • Have a detailed knowledge and understanding of the relevant airworthiness regulations (Military and Civil). • Knowledge and understanding of emerging avionic and mission sensor concepts and technologies. • Knowledge, understanding and experience of the methods, tools and techniques used for the capture of requirements, design, analysis, development and integration of avionic and mission systems. • Experience with the usage of the DOORS Requirements Management Tool (or similar) and Model Based Systems Engineering (MBSE) tools is highly desirable. • • Specific, in-depth knowledge and experience in Avionic and Mission systems, covering some of the following: o Navigation Systems; o Controls and Displays, and Human-Machine Integration; o Mission Sensor Systems, such as Radar, EW and FLIR; o Aircraft and Mission Processing Systems o Electrical Generation and Distribution Systems o Electrical Installation o Software Engineering o Air Vehicle systems o Mission Planning Systems o Human Machine Interface - HMI. o Electrical and avionic system integration. o Electromagnetic Environment and Effects E3. o Cyber and security considerations.
Overview Expleo is a trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation. We help businesses harness unrelenting technological change to successfully deliver innovations that will help them gain a competitive advantage and improve the everyday lives of people around the globe. We are seeking a highly organised and motivated Senior Design Assurance Engineer with experience of Design Assurance activities leading to Aircraft Certification for an aircraft modification program of works being delivered by Expleo on behalf of our client Responsibilities Updating plans and process framework to address comments from certification authorities and ensure compliance with ARP4754A, CMS-DASA-002 and PCRI DA. Creation of templates, checklists and other materials used in the Development Assurance (DA) process. Creation, development and implementation of the Modification Impact Analysis process (ARP4754B Section 6), including detailed procedures, checklists, and templates. Regression analysis as part of the verification strategy. Strategy for reuse or modification of systems and equipment from other certified aircraft types. Evaluation of supplier activities. Integration of E(TSO) articles into the aircraft systems. Consideration of highly complex and integrated systems, with a focus on integration aspects. Providing training and support the implementation of Development Assurance (DA) processes within the company. Supporting PDT teams in adhering to the defined processes, offering clarification and guidance in day-to-day activities Supporting to CVE Panel 10 activities, including preparation for EASA P10 Meetings, Document Reviews, Pre- DAA, 2, 3,4 audits at aircraft, system and equipment level Qualifications Degree or HNC/HND or equivalent in Mechanical or Aerospace Engineering Applications are also welcomed from individuals with significant demonstrable experience who don't hold formal qualifications Essential skills Pro-active engineers with a theoretical and practical engineering background. Have a proven track record of successful design assurance and verification activities within the aerospace industry. Engineering expertise across the engineering lifecycle V-Model or equivalent from initial concepts, requirements, design, implementation, integration, verification, Work collaboratively with the product and functional specialisms to deliver a cohesive solution for the client Desired skills Innovation and Problem Solving - to be able to analyse situations and identify solutions to problems or opportunities for improvement. Two Way Communication - to be highly competent at both written and verbal communication Drive and Commitment - to work persistently to overcome obstacles and deliver results Customer Focus - to recognise customer needs and react accordingly Teamwork - able to participate as an effective team member Tech doc creation/proof reading experience Familiarity with standard office software packages Experience DOA experience Airworthiness experience of CAA requirements for some (or all) of the following ATA chapters, 27,28, 29, 36, 53, 54, 57, 60 ,61, 71 and 72 EASA Panel 10 Verification activities Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
Oct 08, 2025
Full time
Overview Expleo is a trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation. We help businesses harness unrelenting technological change to successfully deliver innovations that will help them gain a competitive advantage and improve the everyday lives of people around the globe. We are seeking a highly organised and motivated Senior Design Assurance Engineer with experience of Design Assurance activities leading to Aircraft Certification for an aircraft modification program of works being delivered by Expleo on behalf of our client Responsibilities Updating plans and process framework to address comments from certification authorities and ensure compliance with ARP4754A, CMS-DASA-002 and PCRI DA. Creation of templates, checklists and other materials used in the Development Assurance (DA) process. Creation, development and implementation of the Modification Impact Analysis process (ARP4754B Section 6), including detailed procedures, checklists, and templates. Regression analysis as part of the verification strategy. Strategy for reuse or modification of systems and equipment from other certified aircraft types. Evaluation of supplier activities. Integration of E(TSO) articles into the aircraft systems. Consideration of highly complex and integrated systems, with a focus on integration aspects. Providing training and support the implementation of Development Assurance (DA) processes within the company. Supporting PDT teams in adhering to the defined processes, offering clarification and guidance in day-to-day activities Supporting to CVE Panel 10 activities, including preparation for EASA P10 Meetings, Document Reviews, Pre- DAA, 2, 3,4 audits at aircraft, system and equipment level Qualifications Degree or HNC/HND or equivalent in Mechanical or Aerospace Engineering Applications are also welcomed from individuals with significant demonstrable experience who don't hold formal qualifications Essential skills Pro-active engineers with a theoretical and practical engineering background. Have a proven track record of successful design assurance and verification activities within the aerospace industry. Engineering expertise across the engineering lifecycle V-Model or equivalent from initial concepts, requirements, design, implementation, integration, verification, Work collaboratively with the product and functional specialisms to deliver a cohesive solution for the client Desired skills Innovation and Problem Solving - to be able to analyse situations and identify solutions to problems or opportunities for improvement. Two Way Communication - to be highly competent at both written and verbal communication Drive and Commitment - to work persistently to overcome obstacles and deliver results Customer Focus - to recognise customer needs and react accordingly Teamwork - able to participate as an effective team member Tech doc creation/proof reading experience Familiarity with standard office software packages Experience DOA experience Airworthiness experience of CAA requirements for some (or all) of the following ATA chapters, 27,28, 29, 36, 53, 54, 57, 60 ,61, 71 and 72 EASA Panel 10 Verification activities Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
Job Description Design Safety Engineer Full Time Bristol - Hybrid - minimum 3 days on site per week Why Rolls-Royce? We have number of Design Safety career opportunities within our Defence business in Bristol and our satellite site in Derby. We are looking to fill a number of roles with a range of levels of experience from new graduates who are eager to develop, to experienced specialists. We are a market leader in aero engines for military transport and patrol aircraft, and also have significant scale in naval, and strong positions in combat and helicopter applications. We are pioneering more advanced and innovative power systems to ensure future combat air systems remain at the forefront of mission capability throughout their operational service. Work with us and we'll welcome you into an inclusive culture, one that invests in your continuous learning and development, and gives you access to a wide breadth and depth of experience. We offer excellent development, a competitive salary and remarkable benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Design Safety engineers influence design through understanding how failures will affect system operation, and analyse the resulting design, providing feedback on any impact this will have to the safety or reliability of the system and ensuring that the appropriate standards are met. This includes: Evaluation of design concepts (potential failures, failure consequences and product-level hazards) and to define hazard mitigation strategies. Evaluation of a component design to identify potential failure modes and their resulting failure effects and criticality (e.g. FMECA). Identification of critical and significant parts and systems through detailed analysis of product risk level. To analyse failures numerically using deterministic and probabilistic mathematical methods. Analyse and quantify risks associated with human / system interaction including Human Factors. Production of Safety Case reports. Operation of a Failure Reporting Analysis & Corrective Action System (FRACAS). Who we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. In addition, the following role specific skills are preferred: Qualification to degree level in a STEM subject and with experience in a relevant engineering environment (Mechanical, Aeronautical, Electrical or Controls). Good holistic approach to problem solving Analytical and logical approach. Familiarity with the design, operation and environment of gas turbine engines. Knowledge / experience of Safety & Reliability engineering techniques. We are an equal opportunities employer. We're committed to developing a diverse team and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Defence you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Engineering for Services Posting Date 07 Oct 2025; 00:10 Posting End Date 13 Oct 2025PandoLogic.
Oct 08, 2025
Full time
Job Description Design Safety Engineer Full Time Bristol - Hybrid - minimum 3 days on site per week Why Rolls-Royce? We have number of Design Safety career opportunities within our Defence business in Bristol and our satellite site in Derby. We are looking to fill a number of roles with a range of levels of experience from new graduates who are eager to develop, to experienced specialists. We are a market leader in aero engines for military transport and patrol aircraft, and also have significant scale in naval, and strong positions in combat and helicopter applications. We are pioneering more advanced and innovative power systems to ensure future combat air systems remain at the forefront of mission capability throughout their operational service. Work with us and we'll welcome you into an inclusive culture, one that invests in your continuous learning and development, and gives you access to a wide breadth and depth of experience. We offer excellent development, a competitive salary and remarkable benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Design Safety engineers influence design through understanding how failures will affect system operation, and analyse the resulting design, providing feedback on any impact this will have to the safety or reliability of the system and ensuring that the appropriate standards are met. This includes: Evaluation of design concepts (potential failures, failure consequences and product-level hazards) and to define hazard mitigation strategies. Evaluation of a component design to identify potential failure modes and their resulting failure effects and criticality (e.g. FMECA). Identification of critical and significant parts and systems through detailed analysis of product risk level. To analyse failures numerically using deterministic and probabilistic mathematical methods. Analyse and quantify risks associated with human / system interaction including Human Factors. Production of Safety Case reports. Operation of a Failure Reporting Analysis & Corrective Action System (FRACAS). Who we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. In addition, the following role specific skills are preferred: Qualification to degree level in a STEM subject and with experience in a relevant engineering environment (Mechanical, Aeronautical, Electrical or Controls). Good holistic approach to problem solving Analytical and logical approach. Familiarity with the design, operation and environment of gas turbine engines. Knowledge / experience of Safety & Reliability engineering techniques. We are an equal opportunities employer. We're committed to developing a diverse team and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Defence you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Engineering for Services Posting Date 07 Oct 2025; 00:10 Posting End Date 13 Oct 2025PandoLogic.
Carbon60 are proud to be partnering with Lufthansa Technik Landing Gear Services to recruit for an Inspector within the Inspection department. Lufthansa Technik are a global leading provider of maintenance, repair, and overhaul services for the civil aviation industry. This Inspector position is on a permanent basis and has become available due to continued growth and expansion. In this role you will be responsible for the detailed inspection of aircraft components using manual measuring tools and inputting data onto Lufthansa Technik Landing Gear's SAP system to record condition of component. Role Responsibilities will include: Undertake and complete a detailed inspection of all components (with exception of components which require a quarantine process due to incident / accident.) using latest criteria and Inspection equipment. Creation and modification of component overhaul / Repair routes within SAP as required. Ensuring that all information (I.E. P/N, S/N and Condition) is recorded in the shop Repair Order and on LTLGS SAP system. Carry out accurate measurement of components where required due to workload. Liaise with colleagues and engineers in other departments to organise component repair and overhaul. Train and mentor other team personnel within the role subject to your qualifications and experience. Maintain a personal Practical Experience Record (PER) book. Actively participate in department daily dialog meetings. Skills and Experience required: Extensive experience within an Aerospace Engineering or equivalent environment. Previous mechanical component inspection background. PC literate. Previous experience working within an SAP computer system would advantageous. Good knowledge of inspection techniques and equipment, Previous practical experience using imperial measurement tools. Why Lufthansa Technik Landing Gear Services? Here are some of their benefits and rewards: Competitive Salary Package Discretionary Bonus Scheme Discounted Flight Benefits Reduced Gym memberships Retail and Hotel Discounts Seasonal Company Events Double day shifts Monday to Friday or Tuesday to Saturday (plenty of notice given) one week 6am to 2pm and one week 2pm to 10pm, alternating weekly. Up to 34,078 salary with shift allowance included within this. If you are interested in the role and want some more information, please contact Becky on (phone number removed) or email Interviews are being held shortly. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Carbon60 are proud to be partnering with Lufthansa Technik Landing Gear Services to recruit for an Inspector within the Inspection department. Lufthansa Technik are a global leading provider of maintenance, repair, and overhaul services for the civil aviation industry. This Inspector position is on a permanent basis and has become available due to continued growth and expansion. In this role you will be responsible for the detailed inspection of aircraft components using manual measuring tools and inputting data onto Lufthansa Technik Landing Gear's SAP system to record condition of component. Role Responsibilities will include: Undertake and complete a detailed inspection of all components (with exception of components which require a quarantine process due to incident / accident.) using latest criteria and Inspection equipment. Creation and modification of component overhaul / Repair routes within SAP as required. Ensuring that all information (I.E. P/N, S/N and Condition) is recorded in the shop Repair Order and on LTLGS SAP system. Carry out accurate measurement of components where required due to workload. Liaise with colleagues and engineers in other departments to organise component repair and overhaul. Train and mentor other team personnel within the role subject to your qualifications and experience. Maintain a personal Practical Experience Record (PER) book. Actively participate in department daily dialog meetings. Skills and Experience required: Extensive experience within an Aerospace Engineering or equivalent environment. Previous mechanical component inspection background. PC literate. Previous experience working within an SAP computer system would advantageous. Good knowledge of inspection techniques and equipment, Previous practical experience using imperial measurement tools. Why Lufthansa Technik Landing Gear Services? Here are some of their benefits and rewards: Competitive Salary Package Discretionary Bonus Scheme Discounted Flight Benefits Reduced Gym memberships Retail and Hotel Discounts Seasonal Company Events Double day shifts Monday to Friday or Tuesday to Saturday (plenty of notice given) one week 6am to 2pm and one week 2pm to 10pm, alternating weekly. Up to 34,078 salary with shift allowance included within this. If you are interested in the role and want some more information, please contact Becky on (phone number removed) or email Interviews are being held shortly. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Role: Engineering Project Manager Location: Gloucester Duration: 12 months Inside IR35 : Umbrella About our Client: A global leader in aviation, dedicated to advancing the future of flight through innovation and precision engineering. With a rich legacy of excellence, they design and manufactures world-class jet engines and systems for commercial, military, and business aviation. Committed to sustainability and cutting-edge technology, they are shaping the next generation of aerospace solutions. Be part of their visionary team and contribute to groundbreaking advancements in flight technology. Engineering Project Manager (Development Test) Role Summary/Purpose: Working alongside a multi-disciplinary team of engineers, the role will be responsible for the planning, monitoring, control and execution of a project to procure a state-of-the art automated capability for fatigue certification testing of propeller blades and components. The project will encompass the generation of requirements for the future test capability alongside a Statement of Work for external Suppliers to bid against; management of the selected Supplier during the design and manufacture of the test rig; and on-site validation of the capability; and will also include specification and delivery of a steel-frame building to house the new facility. The role will involve direct liaison with internal Customers and stakeholders at senior levels across the business and will therefore require someone with a dynamic personality, capable of proactively resolving problems and driving delivery of the project to cost, quality and schedule. Essential responsibilities: Conduct initial detailed project planning for the 2025 project deliverables, and subsequent phased detailed planning throughout the remaining stages of the project. Lead the project team to assure timely delivery of project tasks. Manage the selected Suppliers to assure the quality and timeliness of delivery of the completed test rig and its associated building. Utilise Earned Value (EV) principles to conduct effective monitoring and control to assure the project remains within cost, scope and schedule. Liaise with stakeholders across multiple engineering disciplines to assure that the final capability delivered will fulfil internal our client's Customer technical requirements, including facilitating Supplier design reviews. Conduct routine project reviews as well as formal Tollgate reviews to assure timely progress against business need. Report project progress and delivery to stakeholders and Customers across multiple organisations. Identify, manage and drive down project risks, carry out risk mitigation actions, review status and resolve or elevate issues as required. Implement and maintain our client's standards of compliance and policy. Qualifications/Requirements: Experience in managing Technology Development and/or engineering New Product Introduction projects. Experience in procuring complex, automated equipment and managing Suppliers during the specification, design, manufacture and validation of such equipment. Formal project management qualification, such as: PMI PMP, or equivalent. Proven project leadership experience, capable of taking ownership to ensure deadlines are met to cost, quality and schedule. Detailed understanding of Earned Value principles. Proved track record of strong problem-solving skills and communicating solutions in a concise, professional manner. Experience of operating in a pressurised customer-facing environment. Proficient in MS Project, Excel, Word and PowerPoint. Desired Characteristics Experience procuring complex automated test equipment. Experience of engineering rotating machinery. Experience of requirements management. Knowledge of airworthiness / aircraft certification regulations. Please apply if you want to be part of a leading global aerospace company that delivers complex, mission-critical solutions
Oct 06, 2025
Contractor
Role: Engineering Project Manager Location: Gloucester Duration: 12 months Inside IR35 : Umbrella About our Client: A global leader in aviation, dedicated to advancing the future of flight through innovation and precision engineering. With a rich legacy of excellence, they design and manufactures world-class jet engines and systems for commercial, military, and business aviation. Committed to sustainability and cutting-edge technology, they are shaping the next generation of aerospace solutions. Be part of their visionary team and contribute to groundbreaking advancements in flight technology. Engineering Project Manager (Development Test) Role Summary/Purpose: Working alongside a multi-disciplinary team of engineers, the role will be responsible for the planning, monitoring, control and execution of a project to procure a state-of-the art automated capability for fatigue certification testing of propeller blades and components. The project will encompass the generation of requirements for the future test capability alongside a Statement of Work for external Suppliers to bid against; management of the selected Supplier during the design and manufacture of the test rig; and on-site validation of the capability; and will also include specification and delivery of a steel-frame building to house the new facility. The role will involve direct liaison with internal Customers and stakeholders at senior levels across the business and will therefore require someone with a dynamic personality, capable of proactively resolving problems and driving delivery of the project to cost, quality and schedule. Essential responsibilities: Conduct initial detailed project planning for the 2025 project deliverables, and subsequent phased detailed planning throughout the remaining stages of the project. Lead the project team to assure timely delivery of project tasks. Manage the selected Suppliers to assure the quality and timeliness of delivery of the completed test rig and its associated building. Utilise Earned Value (EV) principles to conduct effective monitoring and control to assure the project remains within cost, scope and schedule. Liaise with stakeholders across multiple engineering disciplines to assure that the final capability delivered will fulfil internal our client's Customer technical requirements, including facilitating Supplier design reviews. Conduct routine project reviews as well as formal Tollgate reviews to assure timely progress against business need. Report project progress and delivery to stakeholders and Customers across multiple organisations. Identify, manage and drive down project risks, carry out risk mitigation actions, review status and resolve or elevate issues as required. Implement and maintain our client's standards of compliance and policy. Qualifications/Requirements: Experience in managing Technology Development and/or engineering New Product Introduction projects. Experience in procuring complex, automated equipment and managing Suppliers during the specification, design, manufacture and validation of such equipment. Formal project management qualification, such as: PMI PMP, or equivalent. Proven project leadership experience, capable of taking ownership to ensure deadlines are met to cost, quality and schedule. Detailed understanding of Earned Value principles. Proved track record of strong problem-solving skills and communicating solutions in a concise, professional manner. Experience of operating in a pressurised customer-facing environment. Proficient in MS Project, Excel, Word and PowerPoint. Desired Characteristics Experience procuring complex automated test equipment. Experience of engineering rotating machinery. Experience of requirements management. Knowledge of airworthiness / aircraft certification regulations. Please apply if you want to be part of a leading global aerospace company that delivers complex, mission-critical solutions
Job Title: Systems Engineer (with Electrical and Electronics Hardware Experience) Location: Bournemouth Airport Salary: Competitive salary , plus an annual performance bonus Job Type: Full-Time, Permanent About us: Spherea UK, a part of the multinational Spherea Group, is a cross-industry provider of complex test systems and test consultancy. With over 50 years of heritage, the company has developed solutions for commercial aircraft, helicopters, armored military vehicles, and space platforms. Spherea's mission is to "test the world"-enabling clients to validate, de-risk, and commercialize their technologies more rapidly and cost-effectively. About the role: This is a cross-disciplinary engineering position with a focus on system-level engineering , hardware/electrical and electronics design , and project execution . You will solve complex problems, work on bespoke systems, and own the product lifecycle from concept to delivery. Key responsibilities include: Providing technical leadership to junior engineers and technicians. Conducting hardware/electrical and electronics design, including schematic capture, component selection, and PCB layout review. Integrating COTS(Commercial Off-The-Shelf) instruments. Managing projects and collaborating with customers and internal teams. Developing, documenting, and testing complex systems. About you: The ideal candidate will have at least 3 years of experience in hardware or systems engineering, with proven experience in analogue/digital electronics and electrical design. You must have a strong understanding of the full engineering lifecycle (V-model, EVM, etc.) and be able to manage projects. Strong communication and documentation skills are also required. What we offer: Competitive salary and annual performance bonus. Generous pension scheme (4% employee / 8% employer). 27 days holiday plus bank holidays. Flexible/remote working options (after a qualifying period). Private healthcare plan (family cover). Family Cash Plan (dental, optical & physio, etc.). Life Assurance & Income Protection. Opportunities to travel and collaborate internationally. Candidates with experience of: Systems Engineer, Hardware Engineer, Electrical Engineer, Electronics Design Engineer, Project Engineer, Test Engineer may also be considered for this role.
Oct 06, 2025
Full time
Job Title: Systems Engineer (with Electrical and Electronics Hardware Experience) Location: Bournemouth Airport Salary: Competitive salary , plus an annual performance bonus Job Type: Full-Time, Permanent About us: Spherea UK, a part of the multinational Spherea Group, is a cross-industry provider of complex test systems and test consultancy. With over 50 years of heritage, the company has developed solutions for commercial aircraft, helicopters, armored military vehicles, and space platforms. Spherea's mission is to "test the world"-enabling clients to validate, de-risk, and commercialize their technologies more rapidly and cost-effectively. About the role: This is a cross-disciplinary engineering position with a focus on system-level engineering , hardware/electrical and electronics design , and project execution . You will solve complex problems, work on bespoke systems, and own the product lifecycle from concept to delivery. Key responsibilities include: Providing technical leadership to junior engineers and technicians. Conducting hardware/electrical and electronics design, including schematic capture, component selection, and PCB layout review. Integrating COTS(Commercial Off-The-Shelf) instruments. Managing projects and collaborating with customers and internal teams. Developing, documenting, and testing complex systems. About you: The ideal candidate will have at least 3 years of experience in hardware or systems engineering, with proven experience in analogue/digital electronics and electrical design. You must have a strong understanding of the full engineering lifecycle (V-model, EVM, etc.) and be able to manage projects. Strong communication and documentation skills are also required. What we offer: Competitive salary and annual performance bonus. Generous pension scheme (4% employee / 8% employer). 27 days holiday plus bank holidays. Flexible/remote working options (after a qualifying period). Private healthcare plan (family cover). Family Cash Plan (dental, optical & physio, etc.). Life Assurance & Income Protection. Opportunities to travel and collaborate internationally. Candidates with experience of: Systems Engineer, Hardware Engineer, Electrical Engineer, Electronics Design Engineer, Project Engineer, Test Engineer may also be considered for this role.
Our client a global provider for aircraft interior solutions, delivering market-leading services including; premium customized monuments, lounges, bars, sky shops, seat modules, galleys, and stowages, are recruiting for a Chief of the Office of Airworthiness for its office based in the London/ Kent area . On Offer: An opportunity to join an expanding organisation, which is part of the world s largest ACMI (Aircraft, Crew, Maintenance, and Insurance) provider supported by 14,000 highly skilled aviation professionals, the group is parent company to over 250+ subsidiaries. Offering a competitive salary, dependant on skills and experience 30 days annual leave including Public/ Bank Holidays Employee Assistance Programme Reimbursement of work expenses Bright Exchange Free parking on Company premises when available Main Purpose of the Chief of the Office of Airworthiness: The main purpose of this role is to ensure that all aircraft design, modifications, and certification activities comply with applicable airworthiness regulations like UK CAA Part 21, EASA, FAA. The Chief of the Office of Airworthiness will lead the organisation airworthiness function and acts as the primary liaison with aviation authorities. Key Accountabilities: • Advising on design and certification issues and supporting the Company s application to the CAA for a Design Approval under part 21 • Attaining Design Approval and acceptance by the CAA • CVE Structures and Cabin Safety, subject to the Company attaining Design Approval and acceptance by the CAA • Act as the company's airworthiness authority and primary point of contact with regulatory bodies (e.g. EASA, UK CAA, FAA) • Maintain oversight of all airworthiness and certification activities, including initial type certification, continued airworthiness, and design changes • Ensure compliance with regulatory requirements (UK CAA Part 21 Subpart J, CS-25/CS-23 or equivalent) • Approve and coordinate the release of airworthiness documentation, including Compliance Checklists, Certification Plans, and Statements of Compliance • Provide strategic leadership to the Office of Airworthiness and support other departments on certification and design assurance issues • Support internal audits and manage external audits related to airworthiness • Review and approve technical documentation submitted to authorities • Participate in design reviews and risk assessments, ensuring airworthiness concerns are identified and mitigated • Represent the company at industry meetings, working groups, and with civil aviation authorities To Be Considered: • Degree in Aerospace Engineering, Mechanical Engineering, or a related discipline • Proven track record and experience in aircraft certification and airworthiness, ideally in a Part 21J Design Organisation • Proven experience dealing with EASA/CAA/FAA and navigating complex certification projects • Strong understanding of aviation regulations and standards (e.g., CS-23, CS-25, Part 21, etc) Skills & Competencies : • Exceptional understanding of regulatory frameworks and compliance pathways • Excellent communication and stakeholder management skills • Strong analytical and problem-solving ability • Leadership and mentoring skills to guide a team of Compliance Verification Engineers /airworthiness engineers Desirable: • Appointment as an approved Compliance Verification Engineer (CVE) or signatory for airworthiness compliance. For full details contact Willis Global a leading Recruitment Consultancy for the Aviation & Aerospace
Oct 03, 2025
Full time
Our client a global provider for aircraft interior solutions, delivering market-leading services including; premium customized monuments, lounges, bars, sky shops, seat modules, galleys, and stowages, are recruiting for a Chief of the Office of Airworthiness for its office based in the London/ Kent area . On Offer: An opportunity to join an expanding organisation, which is part of the world s largest ACMI (Aircraft, Crew, Maintenance, and Insurance) provider supported by 14,000 highly skilled aviation professionals, the group is parent company to over 250+ subsidiaries. Offering a competitive salary, dependant on skills and experience 30 days annual leave including Public/ Bank Holidays Employee Assistance Programme Reimbursement of work expenses Bright Exchange Free parking on Company premises when available Main Purpose of the Chief of the Office of Airworthiness: The main purpose of this role is to ensure that all aircraft design, modifications, and certification activities comply with applicable airworthiness regulations like UK CAA Part 21, EASA, FAA. The Chief of the Office of Airworthiness will lead the organisation airworthiness function and acts as the primary liaison with aviation authorities. Key Accountabilities: • Advising on design and certification issues and supporting the Company s application to the CAA for a Design Approval under part 21 • Attaining Design Approval and acceptance by the CAA • CVE Structures and Cabin Safety, subject to the Company attaining Design Approval and acceptance by the CAA • Act as the company's airworthiness authority and primary point of contact with regulatory bodies (e.g. EASA, UK CAA, FAA) • Maintain oversight of all airworthiness and certification activities, including initial type certification, continued airworthiness, and design changes • Ensure compliance with regulatory requirements (UK CAA Part 21 Subpart J, CS-25/CS-23 or equivalent) • Approve and coordinate the release of airworthiness documentation, including Compliance Checklists, Certification Plans, and Statements of Compliance • Provide strategic leadership to the Office of Airworthiness and support other departments on certification and design assurance issues • Support internal audits and manage external audits related to airworthiness • Review and approve technical documentation submitted to authorities • Participate in design reviews and risk assessments, ensuring airworthiness concerns are identified and mitigated • Represent the company at industry meetings, working groups, and with civil aviation authorities To Be Considered: • Degree in Aerospace Engineering, Mechanical Engineering, or a related discipline • Proven track record and experience in aircraft certification and airworthiness, ideally in a Part 21J Design Organisation • Proven experience dealing with EASA/CAA/FAA and navigating complex certification projects • Strong understanding of aviation regulations and standards (e.g., CS-23, CS-25, Part 21, etc) Skills & Competencies : • Exceptional understanding of regulatory frameworks and compliance pathways • Excellent communication and stakeholder management skills • Strong analytical and problem-solving ability • Leadership and mentoring skills to guide a team of Compliance Verification Engineers /airworthiness engineers Desirable: • Appointment as an approved Compliance Verification Engineer (CVE) or signatory for airworthiness compliance. For full details contact Willis Global a leading Recruitment Consultancy for the Aviation & Aerospace
Aerodynamics Engineer - Graduate Programme 2026 This scheme offers an excellent opportunity to kick-start your aerodynamics career. Work in one of the most exciting areas of the aerospace industry, alongside a team of outstanding aerodynamicists at the forefront of missile aerodynamics. Salary: £31,500 plus a £3000 joining bonus. Location: Bristol Dynamic (Hybrid) Working: 5 days per week on-site due to workload classification. This role requires on-site working in Bristol for the majority of the time due to security considerations and teamwork. However, we will try to accommodate a limited amount of remote working where there are opportunities to do so. Security clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you 2 year Programme: starting September 2026 Salary reviews throughout the Programme Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Annual Leave: 25 days plus option to purchase extra holiday Flexi Leave: Up to 15 additional days Excellent career progression and development opportunities Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity The aerodynamics department at MBDA works on the entire MBDA UK portfolio of products, from concept phase through to in-service support. As a key player in the UK defence industry, we are able to provide outstanding opportunities across a wide range of applications. You'll be able to draw on knowledge and experience from specialist aerodynamics engineers. Receive mentorship and support from our team of aerodynamicists to learn to use cutting-edge aerodynamic techniques; designing the missiles of the future! Undertake four 6-month placements giving exposure to the various aspects of the department, seeking to expose you to the following areas: Design of a range of missiles, in all the different stages of their development (concept, assessment, development, in-service) Application and development of our bespoke tools alongside commercial software to evaluate the performance of airframes Stealth, propulsion, thermal and structural aspects of missile design and how these feed in to a multi-disciplinary design approach Missile integration onto land, naval and air platforms Integration of solid rocket motors and air-breathing engines into missile airframes, and assessment of their impact on missile aerodynamics and overall performance Participate in personal and professional development courses run specifically for graduates and gain technical knowledge from a vast number of company-lead internal technical courses alongside many Chartered Engineers from a number of professional bodies. One of the 6 month placements can be external to Aero. Past graduates have arranged external placements at such companies as Rolls Royce, BAE Systems, DSTL, ARA, S&C Thermofluids and Roxel Motors. These placements help to gain an understanding of customers and supplier workflows and how they feed into MBDA products. MBDA is a multinational company with offices across Europe, there may be opportunities to travel both within the UK and abroad. What we're looking for from you: Degree qualified in an Aerospace engineering, Aeronautical engineering, Mechanical engineering, Production/Manufacturing engineering, Mathematics or Physics discipline (minimum 2:2). Aerodynamics and propulsion based modules are most relevant to this role (such as Fluid Dynamics, Thermodynamics, Aircraft Performance, Flight Dynamics & Control etc.), please list any that you have studied on your application. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Oct 03, 2025
Full time
Aerodynamics Engineer - Graduate Programme 2026 This scheme offers an excellent opportunity to kick-start your aerodynamics career. Work in one of the most exciting areas of the aerospace industry, alongside a team of outstanding aerodynamicists at the forefront of missile aerodynamics. Salary: £31,500 plus a £3000 joining bonus. Location: Bristol Dynamic (Hybrid) Working: 5 days per week on-site due to workload classification. This role requires on-site working in Bristol for the majority of the time due to security considerations and teamwork. However, we will try to accommodate a limited amount of remote working where there are opportunities to do so. Security clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you 2 year Programme: starting September 2026 Salary reviews throughout the Programme Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Annual Leave: 25 days plus option to purchase extra holiday Flexi Leave: Up to 15 additional days Excellent career progression and development opportunities Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity The aerodynamics department at MBDA works on the entire MBDA UK portfolio of products, from concept phase through to in-service support. As a key player in the UK defence industry, we are able to provide outstanding opportunities across a wide range of applications. You'll be able to draw on knowledge and experience from specialist aerodynamics engineers. Receive mentorship and support from our team of aerodynamicists to learn to use cutting-edge aerodynamic techniques; designing the missiles of the future! Undertake four 6-month placements giving exposure to the various aspects of the department, seeking to expose you to the following areas: Design of a range of missiles, in all the different stages of their development (concept, assessment, development, in-service) Application and development of our bespoke tools alongside commercial software to evaluate the performance of airframes Stealth, propulsion, thermal and structural aspects of missile design and how these feed in to a multi-disciplinary design approach Missile integration onto land, naval and air platforms Integration of solid rocket motors and air-breathing engines into missile airframes, and assessment of their impact on missile aerodynamics and overall performance Participate in personal and professional development courses run specifically for graduates and gain technical knowledge from a vast number of company-lead internal technical courses alongside many Chartered Engineers from a number of professional bodies. One of the 6 month placements can be external to Aero. Past graduates have arranged external placements at such companies as Rolls Royce, BAE Systems, DSTL, ARA, S&C Thermofluids and Roxel Motors. These placements help to gain an understanding of customers and supplier workflows and how they feed into MBDA products. MBDA is a multinational company with offices across Europe, there may be opportunities to travel both within the UK and abroad. What we're looking for from you: Degree qualified in an Aerospace engineering, Aeronautical engineering, Mechanical engineering, Production/Manufacturing engineering, Mathematics or Physics discipline (minimum 2:2). Aerodynamics and propulsion based modules are most relevant to this role (such as Fluid Dynamics, Thermodynamics, Aircraft Performance, Flight Dynamics & Control etc.), please list any that you have studied on your application. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Our client a global provider for aircraft interior solutions, delivering market-leading services including; premium customized monuments, lounges, bars, sky shops, seat modules, galleys, and stowages, are recruiting for a Chief of the Office of Airworthiness for its office based in the London/ Kent area . On Offer: An opportunity to join an expanding organisation, which is part of the world s largest ACMI (Aircraft, Crew, Maintenance, and Insurance) provider supported by 14,000 highly skilled aviation professionals, the group is parent company to over 250+ subsidiaries. Offering a competitive salary, dependant on skills and experience 30 days annual leave including Public/ Bank Holidays Employee Assistance Programme Reimbursement of work expenses Bright Exchange Free parking on Company premises when available Main Purpose of the Chief of the Office of Airworthiness: The main purpose of this role is to ensure that all aircraft design, modifications, and certification activities comply with applicable airworthiness regulations like UK CAA Part 21, EASA, FAA. The Chief of the Office of Airworthiness will lead the organisation airworthiness function and acts as the primary liaison with aviation authorities. Key Accountabilities: • Advising on design and certification issues and supporting the Company s application to the CAA for a Design Approval under part 21 • Attaining Design Approval and acceptance by the CAA • CVE Structures and Cabin Safety, subject to the Company attaining Design Approval and acceptance by the CAA • Act as the company's airworthiness authority and primary point of contact with regulatory bodies (e.g. EASA, UK CAA, FAA) • Maintain oversight of all airworthiness and certification activities, including initial type certification, continued airworthiness, and design changes • Ensure compliance with regulatory requirements (UK CAA Part 21 Subpart J, CS-25/CS-23 or equivalent) • Approve and coordinate the release of airworthiness documentation, including Compliance Checklists, Certification Plans, and Statements of Compliance • Provide strategic leadership to the Office of Airworthiness and support other departments on certification and design assurance issues • Support internal audits and manage external audits related to airworthiness • Review and approve technical documentation submitted to authorities • Participate in design reviews and risk assessments, ensuring airworthiness concerns are identified and mitigated • Represent the company at industry meetings, working groups, and with civil aviation authorities To Be Considered: • Degree in Aerospace Engineering, Mechanical Engineering, or a related discipline • Proven track record and experience in aircraft certification and airworthiness, ideally in a Part 21J Design Organisation • Proven experience dealing with EASA/CAA/FAA and navigating complex certification projects • Strong understanding of aviation regulations and standards (e.g., CS-23, CS-25, Part 21, etc) Skills & Competencies : • Exceptional understanding of regulatory frameworks and compliance pathways • Excellent communication and stakeholder management skills • Strong analytical and problem-solving ability • Leadership and mentoring skills to guide a team of Compliance Verification Engineers /airworthiness engineers Desirable: • Appointment as an approved Compliance Verification Engineer (CVE) or signatory for airworthiness compliance. For full details contact Willis Global a leading Recruitment Consultancy for the Aviation & Aerospace
Oct 03, 2025
Full time
Our client a global provider for aircraft interior solutions, delivering market-leading services including; premium customized monuments, lounges, bars, sky shops, seat modules, galleys, and stowages, are recruiting for a Chief of the Office of Airworthiness for its office based in the London/ Kent area . On Offer: An opportunity to join an expanding organisation, which is part of the world s largest ACMI (Aircraft, Crew, Maintenance, and Insurance) provider supported by 14,000 highly skilled aviation professionals, the group is parent company to over 250+ subsidiaries. Offering a competitive salary, dependant on skills and experience 30 days annual leave including Public/ Bank Holidays Employee Assistance Programme Reimbursement of work expenses Bright Exchange Free parking on Company premises when available Main Purpose of the Chief of the Office of Airworthiness: The main purpose of this role is to ensure that all aircraft design, modifications, and certification activities comply with applicable airworthiness regulations like UK CAA Part 21, EASA, FAA. The Chief of the Office of Airworthiness will lead the organisation airworthiness function and acts as the primary liaison with aviation authorities. Key Accountabilities: • Advising on design and certification issues and supporting the Company s application to the CAA for a Design Approval under part 21 • Attaining Design Approval and acceptance by the CAA • CVE Structures and Cabin Safety, subject to the Company attaining Design Approval and acceptance by the CAA • Act as the company's airworthiness authority and primary point of contact with regulatory bodies (e.g. EASA, UK CAA, FAA) • Maintain oversight of all airworthiness and certification activities, including initial type certification, continued airworthiness, and design changes • Ensure compliance with regulatory requirements (UK CAA Part 21 Subpart J, CS-25/CS-23 or equivalent) • Approve and coordinate the release of airworthiness documentation, including Compliance Checklists, Certification Plans, and Statements of Compliance • Provide strategic leadership to the Office of Airworthiness and support other departments on certification and design assurance issues • Support internal audits and manage external audits related to airworthiness • Review and approve technical documentation submitted to authorities • Participate in design reviews and risk assessments, ensuring airworthiness concerns are identified and mitigated • Represent the company at industry meetings, working groups, and with civil aviation authorities To Be Considered: • Degree in Aerospace Engineering, Mechanical Engineering, or a related discipline • Proven track record and experience in aircraft certification and airworthiness, ideally in a Part 21J Design Organisation • Proven experience dealing with EASA/CAA/FAA and navigating complex certification projects • Strong understanding of aviation regulations and standards (e.g., CS-23, CS-25, Part 21, etc) Skills & Competencies : • Exceptional understanding of regulatory frameworks and compliance pathways • Excellent communication and stakeholder management skills • Strong analytical and problem-solving ability • Leadership and mentoring skills to guide a team of Compliance Verification Engineers /airworthiness engineers Desirable: • Appointment as an approved Compliance Verification Engineer (CVE) or signatory for airworthiness compliance. For full details contact Willis Global a leading Recruitment Consultancy for the Aviation & Aerospace
6 - 12 Month Contract Inside IR35 - £55 £65 per hour umbrella Mostly remote with occasional site visits (full time on site can also be accommodated) Job Role: The Contractor Engineer is required to undertake a role within the Aircraft Systems Design Team of our client s Airborne ISR business, supporting aircraft projects. The work shall be performed under both civil and military regulatory environments. The successful candidate will report into the System Engineering team. The work to be undertaken is to collate, acquire and log design data and product conformity to enable successful test and certification of a wide range of aircraft modifications. Examples include aircraft system configuration states, weight analysis, flammability test reporting and evidencing equipment declarations and production of certification letters. This role is suited to an aircraft Avionic and/or Electrical Systems Engineer with experience in the integration and certification of aircraft avionic & electrical systems within an aerospace environment. A high level of attention to detail is required. The role can be tasked based and therefore it may be performed remotely or at our on-site offices with flexible hours of work. Key Responsibilities Liaise with modification Design Engineers to support the production of modification documentation. Identifying, collating and referencing design data through the project Windchill Product Data Management (PDM) tool and network files. Producing certification evidence forms and letters to allow modifications to be submitted for Certification Validation Engineer (CVE) approval. Production of test documentation and other analyses/ reports. Production of modification control documentation. Key Attributes: Essential: Experience as an Avionic and/or Electrical Systems Engineer involving design, integration and certification of aircraft avionic & electrical systems within an aerospace design organisation. Understanding and experience of working to initial airworthiness regulations e.g. FAA or EASA regulations: FAR 23, FAR 25, CS 23, CS 25, etc. Experience of working within a multi-discipline engineering team within the aerospace industry. UK National, no dual nationality and holder of current SC security clearance (eligible to transfer) Desirable: Knowledge of military aircraft modification and certification processes e.g. DAOS, application of DEF-STAN. Use of electrical/wiring design tools and wiring diagram creation e.g. AutoCAD.
Oct 03, 2025
Contractor
6 - 12 Month Contract Inside IR35 - £55 £65 per hour umbrella Mostly remote with occasional site visits (full time on site can also be accommodated) Job Role: The Contractor Engineer is required to undertake a role within the Aircraft Systems Design Team of our client s Airborne ISR business, supporting aircraft projects. The work shall be performed under both civil and military regulatory environments. The successful candidate will report into the System Engineering team. The work to be undertaken is to collate, acquire and log design data and product conformity to enable successful test and certification of a wide range of aircraft modifications. Examples include aircraft system configuration states, weight analysis, flammability test reporting and evidencing equipment declarations and production of certification letters. This role is suited to an aircraft Avionic and/or Electrical Systems Engineer with experience in the integration and certification of aircraft avionic & electrical systems within an aerospace environment. A high level of attention to detail is required. The role can be tasked based and therefore it may be performed remotely or at our on-site offices with flexible hours of work. Key Responsibilities Liaise with modification Design Engineers to support the production of modification documentation. Identifying, collating and referencing design data through the project Windchill Product Data Management (PDM) tool and network files. Producing certification evidence forms and letters to allow modifications to be submitted for Certification Validation Engineer (CVE) approval. Production of test documentation and other analyses/ reports. Production of modification control documentation. Key Attributes: Essential: Experience as an Avionic and/or Electrical Systems Engineer involving design, integration and certification of aircraft avionic & electrical systems within an aerospace design organisation. Understanding and experience of working to initial airworthiness regulations e.g. FAA or EASA regulations: FAR 23, FAR 25, CS 23, CS 25, etc. Experience of working within a multi-discipline engineering team within the aerospace industry. UK National, no dual nationality and holder of current SC security clearance (eligible to transfer) Desirable: Knowledge of military aircraft modification and certification processes e.g. DAOS, application of DEF-STAN. Use of electrical/wiring design tools and wiring diagram creation e.g. AutoCAD.
