Offshore Telecoms Commissioning Engineer We are seeking an experienced Offshore Telecoms Commissioning Engineer to support the hook up and commissioning of key telecoms packages including fibre optic systems, IT/OT networks, VOIP phones, TETRA radio and LTE systems. You will also support with the commissioning of key control and monitoring systems across the wind farm. This is a rotational position based on a SOV (2 weeks on / 2 weeks off). Key Responsibilities Testing and remediation of fibre optic networks (using industry-standard methods). Patching and configuration of networks to approved project drawings. Support network specialists during configuration of switches, access points and VOIP equipment. Troubleshoot and resolve reported issues across all elements of the telecom systems. Commission and verify VOIP phone systems. Assist with hook-up and commissioning of package control systems. Assist with commissioning of TETRA and LTE communications systems. Provide technical input and support where telecom systems interface with LV power supplies and distribution. Act as offshore technical focal point for telecoms. Manage and maintain critical commissioning spares, and temporary communications systems. Produce accurate test reports, commissioning records and punch lists. Work safely under the offshore permit to work system, HSEQ rules and transfer procedures. Essential Skills & Experience Strong offshore telecoms commissioning background, with hands-on experience of fibre testing and remediation. Experience patching structured cabling and working with industry standard hardware (switches, access points). Familiarity with VOIP systems and network service commissioning. Experience with TETRA and/or LTE telecoms systems. Troubleshooting experience of network connectivity issues. Knowledge of PLC and SCADA systems, and ability to assist in commissioning of these systems. Experience working with LV power systems, including safe isolation, termination, and integration of telecoms equipment with LV distribution. Offshore experience (offshore wind preferred; oil & gas, subsea or maritime considered). Valid offshore safety and medical certifications (BOSIET / GWO / offshore medical). Strong documentation, communication, and reporting skills. Desirable Telecom or networking qualifications. Experience with commissioning of offshore wind farms. Knowledge of offshore standards for fibre testing and acceptance. Awareness of offshore LV electrical standards and safe systems of work. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
May 02, 2026
Contractor
Offshore Telecoms Commissioning Engineer We are seeking an experienced Offshore Telecoms Commissioning Engineer to support the hook up and commissioning of key telecoms packages including fibre optic systems, IT/OT networks, VOIP phones, TETRA radio and LTE systems. You will also support with the commissioning of key control and monitoring systems across the wind farm. This is a rotational position based on a SOV (2 weeks on / 2 weeks off). Key Responsibilities Testing and remediation of fibre optic networks (using industry-standard methods). Patching and configuration of networks to approved project drawings. Support network specialists during configuration of switches, access points and VOIP equipment. Troubleshoot and resolve reported issues across all elements of the telecom systems. Commission and verify VOIP phone systems. Assist with hook-up and commissioning of package control systems. Assist with commissioning of TETRA and LTE communications systems. Provide technical input and support where telecom systems interface with LV power supplies and distribution. Act as offshore technical focal point for telecoms. Manage and maintain critical commissioning spares, and temporary communications systems. Produce accurate test reports, commissioning records and punch lists. Work safely under the offshore permit to work system, HSEQ rules and transfer procedures. Essential Skills & Experience Strong offshore telecoms commissioning background, with hands-on experience of fibre testing and remediation. Experience patching structured cabling and working with industry standard hardware (switches, access points). Familiarity with VOIP systems and network service commissioning. Experience with TETRA and/or LTE telecoms systems. Troubleshooting experience of network connectivity issues. Knowledge of PLC and SCADA systems, and ability to assist in commissioning of these systems. Experience working with LV power systems, including safe isolation, termination, and integration of telecoms equipment with LV distribution. Offshore experience (offshore wind preferred; oil & gas, subsea or maritime considered). Valid offshore safety and medical certifications (BOSIET / GWO / offshore medical). Strong documentation, communication, and reporting skills. Desirable Telecom or networking qualifications. Experience with commissioning of offshore wind farms. Knowledge of offshore standards for fibre testing and acceptance. Awareness of offshore LV electrical standards and safe systems of work. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Be part of a forward-thinking engineering business delivering advanced control and automation solutions for energy, infrastructure, and technology projects across the UK. Employees enjoy competitive pay, strong development support, and a collaborative team culture that values ownership and innovation. With varied, meaningful projects and clear opportunities for progression, this is an ideal environment for ambitious engineers who want to grow and make a real impact. Control Systems Engineers £40,000 - £60,000 + Pension, Profit Share, Paid Overtime, On-Site Gym £500 per year cash benefit for leisure activities Paid day off for your birthday Derbyshire Ref: 24272 The Control Systems Engineers will work across a portfolio of complex BESS OR Infrastructure projects. With the majority of work bespoke, you will have the opportunity to develop systems from scratch for time critical systems, for a company who have successfully increased their turnover from £3M to £15M in just three years. Control Systems Engineers - The Role: Concept PLC, HMI & SCADA software design & development Design & configuration of industrial networks Liaising directly with customers to support on all projects Completion of all documentation including FDS Site installation & commissioning Control Systems Engineers - The Person: Ideally, you will have solid experience in the design of PLC/HMI AND SCADA software HOWEVER we are also open to Engineers who are particularly skilled with PLC OR SCADA The larger variety of control systems you have worked with, the better, however you should be competent with at least one of the following: Siemens, Schneider, Rockwell Able to read/modify electrical schematics - if you are able to create them, even better Competent with carrying out FAT/SAT including supporting documentation Preferably hold a BEng/BSc of higher in an electrical based subject, however experience is key for these roles Essential to be able to complete all documentation including FDS, FAT & SAT We are looking for Engineers happy to be office based with c20% of your time spent on site for UK based projects. Located on the Derbyshire border, this role would be commutable from Nottingham, Derby, Ripley and Loughborough. For further information call John Anderson AE2
May 01, 2026
Full time
Be part of a forward-thinking engineering business delivering advanced control and automation solutions for energy, infrastructure, and technology projects across the UK. Employees enjoy competitive pay, strong development support, and a collaborative team culture that values ownership and innovation. With varied, meaningful projects and clear opportunities for progression, this is an ideal environment for ambitious engineers who want to grow and make a real impact. Control Systems Engineers £40,000 - £60,000 + Pension, Profit Share, Paid Overtime, On-Site Gym £500 per year cash benefit for leisure activities Paid day off for your birthday Derbyshire Ref: 24272 The Control Systems Engineers will work across a portfolio of complex BESS OR Infrastructure projects. With the majority of work bespoke, you will have the opportunity to develop systems from scratch for time critical systems, for a company who have successfully increased their turnover from £3M to £15M in just three years. Control Systems Engineers - The Role: Concept PLC, HMI & SCADA software design & development Design & configuration of industrial networks Liaising directly with customers to support on all projects Completion of all documentation including FDS Site installation & commissioning Control Systems Engineers - The Person: Ideally, you will have solid experience in the design of PLC/HMI AND SCADA software HOWEVER we are also open to Engineers who are particularly skilled with PLC OR SCADA The larger variety of control systems you have worked with, the better, however you should be competent with at least one of the following: Siemens, Schneider, Rockwell Able to read/modify electrical schematics - if you are able to create them, even better Competent with carrying out FAT/SAT including supporting documentation Preferably hold a BEng/BSc of higher in an electrical based subject, however experience is key for these roles Essential to be able to complete all documentation including FDS, FAT & SAT We are looking for Engineers happy to be office based with c20% of your time spent on site for UK based projects. Located on the Derbyshire border, this role would be commutable from Nottingham, Derby, Ripley and Loughborough. For further information call John Anderson AE2
Senior Control Systems Engineer Reading Up to 65k My client is an established engineering organisation specialising in industrial automation, control systems, and process solutions, primarily within the utilities sector. They deliver end-to-end projects including design, software development, installation, and commissioning. Key Responsibilities Carry out site surveys and produce clear, structured reports Develop high-quality Functional Design Specifications (FDS) Design, program, and configure PLC, HMI, and SCADA systems Lead and deliver Factory Acceptance Tests (FAT), Customer FAT (CFAT), and Site Acceptance Tests (SAT) Produce Risk Assessments and Method Statements (RAMS) Support installation, commissioning, and fault-finding activities on site Manage project documentation, deliverables, and technical communications Collaborate with colleagues and support junior engineers through mentoring and training Essential Skills & Experience Experience in industrial automation and control systems Strong PLC programming experience (e.g. Allen Bradley or similar platforms) Knowledge of HMI/SCADA systems and process control principles Experience with commissioning and on-site delivery Electrical awareness and ability to work safely around control equipment Strong attention to detail in both software and documentation Effective communication skills (written and verbal) Ability to manage projects through to completion Competent IT and documentation skills Full UK driving licence Desirable Skills Experience with a range of PLC platforms (e.g. ControlLogix, Siemens, Mitsubishi) Familiarity with SCADA platforms (e.g. Wonderware, Iconics, Schneider) Industrial networking knowledge (e.g. Modbus, Profibus, Ethernet/IP) Experience with instrumentation (flow, level, pressure, drives) Electrical design or panel experience (including reading drawings) Experience within the utilities or water sector
May 01, 2026
Full time
Senior Control Systems Engineer Reading Up to 65k My client is an established engineering organisation specialising in industrial automation, control systems, and process solutions, primarily within the utilities sector. They deliver end-to-end projects including design, software development, installation, and commissioning. Key Responsibilities Carry out site surveys and produce clear, structured reports Develop high-quality Functional Design Specifications (FDS) Design, program, and configure PLC, HMI, and SCADA systems Lead and deliver Factory Acceptance Tests (FAT), Customer FAT (CFAT), and Site Acceptance Tests (SAT) Produce Risk Assessments and Method Statements (RAMS) Support installation, commissioning, and fault-finding activities on site Manage project documentation, deliverables, and technical communications Collaborate with colleagues and support junior engineers through mentoring and training Essential Skills & Experience Experience in industrial automation and control systems Strong PLC programming experience (e.g. Allen Bradley or similar platforms) Knowledge of HMI/SCADA systems and process control principles Experience with commissioning and on-site delivery Electrical awareness and ability to work safely around control equipment Strong attention to detail in both software and documentation Effective communication skills (written and verbal) Ability to manage projects through to completion Competent IT and documentation skills Full UK driving licence Desirable Skills Experience with a range of PLC platforms (e.g. ControlLogix, Siemens, Mitsubishi) Familiarity with SCADA platforms (e.g. Wonderware, Iconics, Schneider) Industrial networking knowledge (e.g. Modbus, Profibus, Ethernet/IP) Experience with instrumentation (flow, level, pressure, drives) Electrical design or panel experience (including reading drawings) Experience within the utilities or water sector
OT / SCADA Engineer (Industrial Networks) North East Scotland (hybrid role) £63,000 + bonus (flexible for the right person) Working on a role that sits much closer to industrial networks and OT communications than a traditional SCADA position. The focus is on keeping critical OT network infrastructure running reliably across operational energy assets supporting SCADA systems rather than owning them, and working closely with vendors delivering comms and fibre networks offshore. If your background sits somewhere between networks, control systems and operational technology, this could be worth a look. The Opportunity This role supports critical operational systems across offshore assets, helping ensure reliable communications, robust control infrastructure and secure, resilient performance. You ll be involved in: Managing and supporting industrial / OT communications networks Working with contractors responsible for fibre and offshore comms systems Supporting SCADA and control system infrastructure (OEM-led) Ensuring reliability and performance across operational assets Troubleshooting and improving network / systems performance Supporting wider OT systems across a growing portfolio There is also scope to support wider assets across a growing international portfolio, so there's progression and long-term development potential. Why This Role? What makes this stand out: Broad technical remit, not a narrow support role Opportunity to influence and improve systems Smaller team environment where you can genuinely affect change Exposure across multiple assets and technologies Clear progression as the portfolio grows It could suit someone looking to move from a larger, more siloed business into a role with wider ownership and visibility. What We re Looking For You're likely experienced in utilities, renewables, power or oil & gas environments with some combination of: SCADA or industrial control systems OT / industrial networking Communications infrastructure System troubleshooting and technical support Cyber/security awareness within operational environments If your experience sits somewhere between networks, controls and OT systems, this could be worth a conversation. If this sounds of interest, or you d like a confidential discussion, get in touch today.
May 01, 2026
Full time
OT / SCADA Engineer (Industrial Networks) North East Scotland (hybrid role) £63,000 + bonus (flexible for the right person) Working on a role that sits much closer to industrial networks and OT communications than a traditional SCADA position. The focus is on keeping critical OT network infrastructure running reliably across operational energy assets supporting SCADA systems rather than owning them, and working closely with vendors delivering comms and fibre networks offshore. If your background sits somewhere between networks, control systems and operational technology, this could be worth a look. The Opportunity This role supports critical operational systems across offshore assets, helping ensure reliable communications, robust control infrastructure and secure, resilient performance. You ll be involved in: Managing and supporting industrial / OT communications networks Working with contractors responsible for fibre and offshore comms systems Supporting SCADA and control system infrastructure (OEM-led) Ensuring reliability and performance across operational assets Troubleshooting and improving network / systems performance Supporting wider OT systems across a growing portfolio There is also scope to support wider assets across a growing international portfolio, so there's progression and long-term development potential. Why This Role? What makes this stand out: Broad technical remit, not a narrow support role Opportunity to influence and improve systems Smaller team environment where you can genuinely affect change Exposure across multiple assets and technologies Clear progression as the portfolio grows It could suit someone looking to move from a larger, more siloed business into a role with wider ownership and visibility. What We re Looking For You're likely experienced in utilities, renewables, power or oil & gas environments with some combination of: SCADA or industrial control systems OT / industrial networking Communications infrastructure System troubleshooting and technical support Cyber/security awareness within operational environments If your experience sits somewhere between networks, controls and OT systems, this could be worth a conversation. If this sounds of interest, or you d like a confidential discussion, get in touch today.
Astute are partnered with Capula, part of the Dalkia Group, a long-established and highly reputable system integration specialist operating across energy, water, renewables and manufacturing sectors. Due to continued growth, Capula are looking for a Commissioning Engineer to join their Energy division, based from Stone with regular travel to UK client sites. This is a hands-on role focused on the testing and commissioning of electrical automation and control systems, ranging from system upgrades to full turnkey installations. As a Commissioning Engineer, you will play a key role in ensuring systems are tested, validated, and ready for operation, working closely with engineering and site teams. Responsibilities and duties of the Commissioning Engineer role As the Commissioning Engineer, you will be: Carrying out site acceptance testing (SAT) and commissioning activities Supporting factory acceptance testing (FAT) Supervising installation work on client sites Ensuring all work meets technical and safety standards Producing and managing commissioning documentation and test records Marking up drawings and schematics with site changes Developing and reviewing test and commissioning procedures Deploying and verifying configuration files (PLC, SCADA, RTU, IEDs, networks) Supporting site preparation, materials, and equipment setup Managing commissioning tools, spares, and test equipment Carrying out fault finding and resolving system issues Managing LOTO and safe isolation procedures on site Professional qualifications We are looking for someone with the following: Background in Electrical Engineering or similar discipline Experience in test and commissioning of electrical/control systems Strong fault-finding skills on electrical and electronic systems Understanding of SCADA, PLCs, and substation control systems Knowledge of communication networks (Ethernet, fibre, serial systems) Ability to read and interpret electrical drawings and schematics Understanding of electrical safety and LOTO procedures Full UK driving licence and willingness to travel Desirable: 18th Edition (BS7671) and C&G 2391 Inspection & Testing Experience on National Grid substations Knowledge of substation secondary systems Experience writing test and commissioning documentation Personal Skills The Commissioning Engineer role would suit someone who is: Technically strong with a hands-on approach Analytical and methodical in problem solving A clear communicator with site teams and clients Able to work independently and as part of a team Comfortable working under pressure and to deadlines Flexible with travel and site-based work Salary and benefits of the Commissioning Engineer role Competitive salary (dependent on experience) 28 days holiday + bank holidays Flexible working arrangements Pension scheme Life assurance Private healthcare Lifestyle screening Salary sacrifice schemes Mental health assistance programme Cycle to work scheme Green car scheme Support toward professional registration (IEng / CEng) and paid membership fees INDNUC Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Apr 30, 2026
Full time
Astute are partnered with Capula, part of the Dalkia Group, a long-established and highly reputable system integration specialist operating across energy, water, renewables and manufacturing sectors. Due to continued growth, Capula are looking for a Commissioning Engineer to join their Energy division, based from Stone with regular travel to UK client sites. This is a hands-on role focused on the testing and commissioning of electrical automation and control systems, ranging from system upgrades to full turnkey installations. As a Commissioning Engineer, you will play a key role in ensuring systems are tested, validated, and ready for operation, working closely with engineering and site teams. Responsibilities and duties of the Commissioning Engineer role As the Commissioning Engineer, you will be: Carrying out site acceptance testing (SAT) and commissioning activities Supporting factory acceptance testing (FAT) Supervising installation work on client sites Ensuring all work meets technical and safety standards Producing and managing commissioning documentation and test records Marking up drawings and schematics with site changes Developing and reviewing test and commissioning procedures Deploying and verifying configuration files (PLC, SCADA, RTU, IEDs, networks) Supporting site preparation, materials, and equipment setup Managing commissioning tools, spares, and test equipment Carrying out fault finding and resolving system issues Managing LOTO and safe isolation procedures on site Professional qualifications We are looking for someone with the following: Background in Electrical Engineering or similar discipline Experience in test and commissioning of electrical/control systems Strong fault-finding skills on electrical and electronic systems Understanding of SCADA, PLCs, and substation control systems Knowledge of communication networks (Ethernet, fibre, serial systems) Ability to read and interpret electrical drawings and schematics Understanding of electrical safety and LOTO procedures Full UK driving licence and willingness to travel Desirable: 18th Edition (BS7671) and C&G 2391 Inspection & Testing Experience on National Grid substations Knowledge of substation secondary systems Experience writing test and commissioning documentation Personal Skills The Commissioning Engineer role would suit someone who is: Technically strong with a hands-on approach Analytical and methodical in problem solving A clear communicator with site teams and clients Able to work independently and as part of a team Comfortable working under pressure and to deadlines Flexible with travel and site-based work Salary and benefits of the Commissioning Engineer role Competitive salary (dependent on experience) 28 days holiday + bank holidays Flexible working arrangements Pension scheme Life assurance Private healthcare Lifestyle screening Salary sacrifice schemes Mental health assistance programme Cycle to work scheme Green car scheme Support toward professional registration (IEng / CEng) and paid membership fees INDNUC Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Senior Industrial Control Systems (ICS) and Security Manager Walton Park Personal Contract Full- time Joint-contribution pension from 6% (12% total) - Enhanced maternity & family leave - Life assurance - HolidayPlus - Virtual GP & Employee Assistance Programme plus retail and leisure discounts & many more. REQ5583 A senior governance and technical leadership role responsible for the lifecycle management, security, and governance of SGN's Operational Technology systems and physical security infrastructure at critical national infrastructure sites across the gas transmission network, ensuring regulatory compliance and risk management in line with industry and national standards. We deliver safety, warmth, and comfort to homes and businesses. Every role, whether in the office or on the front line, plays a key part in this mission. Here's how you will contribute Act as Asset Owner for SCADA and OT systems, maintaining governance, lifecycle management, and configuration control across SGN's gas transmission network Lead OT cybersecurity governance across Critical National Infrastructure (CNI) sites, ensuring compliance with NIS Regulations, the Cyber Assessment Framework (CAF), and HSE expectations for control system integrity Govern physical security assets at gas sites, maintaining appropriate protections and ensuring system changes are appropriately controlled Lead delivery of the OT capital programme, driving cyber security improvements, system upgrades, and resilience investments to time and regulatory commitments Coordinate cross-directorate engagement with Operations, Engineering, Cyber, and Regulatory teams to maintain oversight of OT risk, resilience, and compliance obligations Provide senior technical decision-making authority on OT security architecture, system resilience, and change governance - ensuring continuity of safe gas network operations What you will need Proven experience in OT or ICMS asset management, including hands on familiarity with SCADA systems, within a safety critical or regulated environment Strong understanding of OT cybersecurity frameworks and regulatory obligations, including NIS Regulations, the Cyber Assessment Framework (CAF), and IEC 62443 Experience in physical security asset management at Critical National Infrastructure (CNI) sites or equivalent high security operational environments Demonstrated ability to lead capital programmes and manage cross functional delivery across engineering, cyber, and operations disciplines Strong stakeholder management and communication skills, with the ability to operate at senior level across technical and non technical audiences including regulators Relevant qualification in engineering, computer science, cybersecurity, or a related discipline; professional accreditation in OT/ICS security or asset management is desirable Not sure you meet every requirement? Research shows some people - particularly women and those from underrepresented backgrounds - may hesitate to apply unless they meet every criteria. At SGN, we value diverse backgrounds, experiences and perspectives. Accommodations during the application process If you require any accommodations or support during the application process, reach out to us. We're here to help ensure an inclusive and accessible experience for everyone.
Apr 30, 2026
Full time
Senior Industrial Control Systems (ICS) and Security Manager Walton Park Personal Contract Full- time Joint-contribution pension from 6% (12% total) - Enhanced maternity & family leave - Life assurance - HolidayPlus - Virtual GP & Employee Assistance Programme plus retail and leisure discounts & many more. REQ5583 A senior governance and technical leadership role responsible for the lifecycle management, security, and governance of SGN's Operational Technology systems and physical security infrastructure at critical national infrastructure sites across the gas transmission network, ensuring regulatory compliance and risk management in line with industry and national standards. We deliver safety, warmth, and comfort to homes and businesses. Every role, whether in the office or on the front line, plays a key part in this mission. Here's how you will contribute Act as Asset Owner for SCADA and OT systems, maintaining governance, lifecycle management, and configuration control across SGN's gas transmission network Lead OT cybersecurity governance across Critical National Infrastructure (CNI) sites, ensuring compliance with NIS Regulations, the Cyber Assessment Framework (CAF), and HSE expectations for control system integrity Govern physical security assets at gas sites, maintaining appropriate protections and ensuring system changes are appropriately controlled Lead delivery of the OT capital programme, driving cyber security improvements, system upgrades, and resilience investments to time and regulatory commitments Coordinate cross-directorate engagement with Operations, Engineering, Cyber, and Regulatory teams to maintain oversight of OT risk, resilience, and compliance obligations Provide senior technical decision-making authority on OT security architecture, system resilience, and change governance - ensuring continuity of safe gas network operations What you will need Proven experience in OT or ICMS asset management, including hands on familiarity with SCADA systems, within a safety critical or regulated environment Strong understanding of OT cybersecurity frameworks and regulatory obligations, including NIS Regulations, the Cyber Assessment Framework (CAF), and IEC 62443 Experience in physical security asset management at Critical National Infrastructure (CNI) sites or equivalent high security operational environments Demonstrated ability to lead capital programmes and manage cross functional delivery across engineering, cyber, and operations disciplines Strong stakeholder management and communication skills, with the ability to operate at senior level across technical and non technical audiences including regulators Relevant qualification in engineering, computer science, cybersecurity, or a related discipline; professional accreditation in OT/ICS security or asset management is desirable Not sure you meet every requirement? Research shows some people - particularly women and those from underrepresented backgrounds - may hesitate to apply unless they meet every criteria. At SGN, we value diverse backgrounds, experiences and perspectives. Accommodations during the application process If you require any accommodations or support during the application process, reach out to us. We're here to help ensure an inclusive and accessible experience for everyone.
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Apr 30, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Junior Project Engineer (SCADA) Are you a motivated Junior Project Engineer with an interest in SCADA systems and industrial automation? Are you looking to develop your skills within a supportive engineering environment? If so, this opportunity could be ideal for you. Our client, a well-established engineering company, is seeking a Junior Project Engineer (SCADA) to join their team in Hemel Hempstead. The successful candidate will support the delivery of SCADA and control system projects, gaining hands-on experience across the full project lifecycle. Junior Project Engineer (SCADA) Permanent positionSalary: £30,000 - £40,000 (DOE)Monday to FridayHemel Hempstead Junior Project Engineer (SCADA) Job Description • Assist in the design and development of SCADA and control systems• Support the creation and organisation of technical documentation and system layouts• Work alongside senior engineers on project delivery from concept through to commissioning• Assist with data collection, site surveys, and asset information management• Support PLC/SCADA configuration, testing, and system integration activities• Liaise with internal teams, subcontractors, and clients to ensure project requirements are met• Help ensure projects are delivered on time and within budget• Maintain accurate project records with a strong focus on data quality and detail• Contribute to continuous improvement of engineering and documentation processes Junior Project Engineer (SCADA) Essential Experience / Skills / Qualifications • Degree in Electrical, Control & Instrumentation, Automation, or Systems Engineering• Strong ability to organise and manage technical information• High attention to detail and data accuracy• Good written communication skills• Proficiency in MS Word, Excel, and diagramming tools• Ability to work both independently and as part of a team• Valid UK driving licence Desirable • Awareness of SCADA or industrial control systems• Familiarity with site surveys and asset data collection• Basic understanding of PLCs, RTUs, and control networks• Exposure to URS or FEED-stage engineering If you feel you're a good fit for this position, please click 'apply'.
Apr 30, 2026
Full time
Junior Project Engineer (SCADA) Are you a motivated Junior Project Engineer with an interest in SCADA systems and industrial automation? Are you looking to develop your skills within a supportive engineering environment? If so, this opportunity could be ideal for you. Our client, a well-established engineering company, is seeking a Junior Project Engineer (SCADA) to join their team in Hemel Hempstead. The successful candidate will support the delivery of SCADA and control system projects, gaining hands-on experience across the full project lifecycle. Junior Project Engineer (SCADA) Permanent positionSalary: £30,000 - £40,000 (DOE)Monday to FridayHemel Hempstead Junior Project Engineer (SCADA) Job Description • Assist in the design and development of SCADA and control systems• Support the creation and organisation of technical documentation and system layouts• Work alongside senior engineers on project delivery from concept through to commissioning• Assist with data collection, site surveys, and asset information management• Support PLC/SCADA configuration, testing, and system integration activities• Liaise with internal teams, subcontractors, and clients to ensure project requirements are met• Help ensure projects are delivered on time and within budget• Maintain accurate project records with a strong focus on data quality and detail• Contribute to continuous improvement of engineering and documentation processes Junior Project Engineer (SCADA) Essential Experience / Skills / Qualifications • Degree in Electrical, Control & Instrumentation, Automation, or Systems Engineering• Strong ability to organise and manage technical information• High attention to detail and data accuracy• Good written communication skills• Proficiency in MS Word, Excel, and diagramming tools• Ability to work both independently and as part of a team• Valid UK driving licence Desirable • Awareness of SCADA or industrial control systems• Familiarity with site surveys and asset data collection• Basic understanding of PLCs, RTUs, and control networks• Exposure to URS or FEED-stage engineering If you feel you're a good fit for this position, please click 'apply'.
Base Location: Flexible Scotland We're proud to offer a Flexible First approach to work, and this role is no exception. We will, however, need your base 'home' location to be one of our SSEN offices or depots around Scotland in Aberdeen, Tayside or Argyll Salary: Up to £51,484 + a range of benefits to support your finances, wellbeing and family. Working Pattern: Permanent Full Time The role As a Technical Services Field Unit Technician, you will join a team of highly skilled colleagues to help deliver our capital delivery programme on our Transmission network, and the maintenance of existing protection and control systems. This is a pivotal role within the business, ensuring we build and maintain the highest standard of network for our customers. Due to the 24/7 nature of our networks, you may be required to work away from your base location on occasion and assist in a variety of ad hoc activities. You will Support a team of Protection and SCADA Field Engineers by assisting with technical tasks, troubleshooting issues, and sharing knowledge to promote teamwork and efficiency. Conduct Protection and Control panel wiring and modification works, ensuring all procedures comply with safety regulations and quality standards. You'll also support commissioning activities and assist in upgrading existing systems to improve reliability. Carry out basic protection relay testing and maintenance to verify system functionality, identify faults, and ensure timely resolution. You'll document findings and provide feedback for continuous improvement. Ensure multicore cabling and panel steelwork modifications are performed accurately, supporting the installation of new equipment and refurbishment of existing infrastructure. Attention to detail and adherence to technical specifications are essential. Maintain protection stores, manage inventory levels, and arrange calibration of test equipment. You'll also support logistical activities, ensuring tools and materials are available for field work and compliance with maintenance schedules. You have A technical qualification to City & Guilds/SVQ level. Previous experience and technical knowledge of control and protection panels within a substation environment. Sound understanding of reading and interpreting protection schematic and wiring diagrams. Experience of carrying out testing and fault-finding on secondary wiring and auxiliary equipment. A full UK driving licence as this role will require travelling to our various locations. Flexible benefits to fit your life Enjoy discounts on private healthcare and gym memberships. Wellbeing benefits like a free online GP and 24/7 counselling service. Interest free loans on tech and transport season tickets, or a new bike with our Cycle to Work scheme. As well as generous family entitlements such as maternity and adoption pay, and paternity leave. Work with an equal opportunity employer SSE will make any reasonable adjustments you need to ensure that your application is positive. We are dedicated to fostering an open and inclusive workplace where people from all backgrounds can thrive. We create equal opportunities for everyone to succeed and especially welcome applications from those who may not be well represented in our workforce or industry.
Apr 30, 2026
Full time
Base Location: Flexible Scotland We're proud to offer a Flexible First approach to work, and this role is no exception. We will, however, need your base 'home' location to be one of our SSEN offices or depots around Scotland in Aberdeen, Tayside or Argyll Salary: Up to £51,484 + a range of benefits to support your finances, wellbeing and family. Working Pattern: Permanent Full Time The role As a Technical Services Field Unit Technician, you will join a team of highly skilled colleagues to help deliver our capital delivery programme on our Transmission network, and the maintenance of existing protection and control systems. This is a pivotal role within the business, ensuring we build and maintain the highest standard of network for our customers. Due to the 24/7 nature of our networks, you may be required to work away from your base location on occasion and assist in a variety of ad hoc activities. You will Support a team of Protection and SCADA Field Engineers by assisting with technical tasks, troubleshooting issues, and sharing knowledge to promote teamwork and efficiency. Conduct Protection and Control panel wiring and modification works, ensuring all procedures comply with safety regulations and quality standards. You'll also support commissioning activities and assist in upgrading existing systems to improve reliability. Carry out basic protection relay testing and maintenance to verify system functionality, identify faults, and ensure timely resolution. You'll document findings and provide feedback for continuous improvement. Ensure multicore cabling and panel steelwork modifications are performed accurately, supporting the installation of new equipment and refurbishment of existing infrastructure. Attention to detail and adherence to technical specifications are essential. Maintain protection stores, manage inventory levels, and arrange calibration of test equipment. You'll also support logistical activities, ensuring tools and materials are available for field work and compliance with maintenance schedules. You have A technical qualification to City & Guilds/SVQ level. Previous experience and technical knowledge of control and protection panels within a substation environment. Sound understanding of reading and interpreting protection schematic and wiring diagrams. Experience of carrying out testing and fault-finding on secondary wiring and auxiliary equipment. A full UK driving licence as this role will require travelling to our various locations. Flexible benefits to fit your life Enjoy discounts on private healthcare and gym memberships. Wellbeing benefits like a free online GP and 24/7 counselling service. Interest free loans on tech and transport season tickets, or a new bike with our Cycle to Work scheme. As well as generous family entitlements such as maternity and adoption pay, and paternity leave. Work with an equal opportunity employer SSE will make any reasonable adjustments you need to ensure that your application is positive. We are dedicated to fostering an open and inclusive workplace where people from all backgrounds can thrive. We create equal opportunities for everyone to succeed and especially welcome applications from those who may not be well represented in our workforce or industry.
DESCRIPTION We are looking for a talented Manufacturing IT/OT Software Engineer to join our team in Darlington, County Durham, United Kingdom. This is an on-site role. The position requires a significant presence at the workplace and follows a 37.5-hour work week. In this role, you will make an impact in the following ways: Design, develop, and implement software solutions by analyzing business needs, studying system flows, and applying the full software development lifecycle. Document and demonstrate solutions through clear technical documentation, flowcharts, layouts, and system specifications. Evaluate feasibility of proposed solutions by conducting requirements analysis, problem definition, and solution design. Prepare, install, and maintain software applications while ensuring compliance with coding standards, technical design, and system performance requirements. Continuously improve applications and processes by performing system analysis, recommending changes, and integrating new policies, procedures, and technologies. Stay current with emerging tools, programming techniques, and industry best practices through continuous learning, professional engagement, and adoption of modern technologies (including open source). Ensure quality and reliability by actively participating in testing, validation, and certification processes while fostering built-in quality and technical agility within teams. Protect and deliver business value by safeguarding IT assets, supporting decentralized decision-making, and maintaining strong relationships through effective Business Relationship Management practices. RESPONSIBILITIES To be successful in this role you will need the following: Technical Expertise: Proven experience with cloud-based systems and architectures (Azure, AWS, IoT, AI/ML), DevOps practices, CI/CD pipelines, RDBMS (MS SQL, Oracle, PostgreSQL), and integration technologies (APIs, REST, SOAP, webhooks). Proficient in an enterprise language such as: .NET, Java, or C++ with strong object-oriented design and modular architecture principles a plus Operational Technology & Manufacturing Knowledge: Familiarity with robotic and OT systems (AMRs, Cobots, PLCs), industrial KPIs (OEE, MTBF, cycle time), and supporting tools such as SPC and SCADA; strong understanding of OT communication technologies (OPC, MQTT, TCP, networking). Change & Project Management: Demonstrated ability to follow IT change management methodologies, ensure effective stakeholder communication, and take accountability for project deliverables. Collaboration & Leadership: Strong interpersonal skills with the ability to integrate into teams, build relationships across technical and leadership levels, and drive alignment between Plant IT, GPVs, and Client IT organizations. QUALIFICATIONS Education/ Experience: Bachelor's degree in Computer Science, Engineering, or related field, or equivalent professional experience, with a background as a software engineer. IT fundamentals with hands on experience in the full software development lifecycle, including requirements gathering, system design, coding, testing, deployment, and operations. Familiarity with Agile environments and proven ability to apply software engineering best practices (coding standards, code reviews, source control, CI/CD) while effectively collaborating with users, technical teams, and management to deliver on requirements and deadlines.
Apr 29, 2026
Full time
DESCRIPTION We are looking for a talented Manufacturing IT/OT Software Engineer to join our team in Darlington, County Durham, United Kingdom. This is an on-site role. The position requires a significant presence at the workplace and follows a 37.5-hour work week. In this role, you will make an impact in the following ways: Design, develop, and implement software solutions by analyzing business needs, studying system flows, and applying the full software development lifecycle. Document and demonstrate solutions through clear technical documentation, flowcharts, layouts, and system specifications. Evaluate feasibility of proposed solutions by conducting requirements analysis, problem definition, and solution design. Prepare, install, and maintain software applications while ensuring compliance with coding standards, technical design, and system performance requirements. Continuously improve applications and processes by performing system analysis, recommending changes, and integrating new policies, procedures, and technologies. Stay current with emerging tools, programming techniques, and industry best practices through continuous learning, professional engagement, and adoption of modern technologies (including open source). Ensure quality and reliability by actively participating in testing, validation, and certification processes while fostering built-in quality and technical agility within teams. Protect and deliver business value by safeguarding IT assets, supporting decentralized decision-making, and maintaining strong relationships through effective Business Relationship Management practices. RESPONSIBILITIES To be successful in this role you will need the following: Technical Expertise: Proven experience with cloud-based systems and architectures (Azure, AWS, IoT, AI/ML), DevOps practices, CI/CD pipelines, RDBMS (MS SQL, Oracle, PostgreSQL), and integration technologies (APIs, REST, SOAP, webhooks). Proficient in an enterprise language such as: .NET, Java, or C++ with strong object-oriented design and modular architecture principles a plus Operational Technology & Manufacturing Knowledge: Familiarity with robotic and OT systems (AMRs, Cobots, PLCs), industrial KPIs (OEE, MTBF, cycle time), and supporting tools such as SPC and SCADA; strong understanding of OT communication technologies (OPC, MQTT, TCP, networking). Change & Project Management: Demonstrated ability to follow IT change management methodologies, ensure effective stakeholder communication, and take accountability for project deliverables. Collaboration & Leadership: Strong interpersonal skills with the ability to integrate into teams, build relationships across technical and leadership levels, and drive alignment between Plant IT, GPVs, and Client IT organizations. QUALIFICATIONS Education/ Experience: Bachelor's degree in Computer Science, Engineering, or related field, or equivalent professional experience, with a background as a software engineer. IT fundamentals with hands on experience in the full software development lifecycle, including requirements gathering, system design, coding, testing, deployment, and operations. Familiarity with Agile environments and proven ability to apply software engineering best practices (coding standards, code reviews, source control, CI/CD) while effectively collaborating with users, technical teams, and management to deliver on requirements and deadlines.
At Amentum, we're not just solving problems; we're engineering the future. Our team is driven by an unyielding commitment to innovation, integrity, and collaboration, tackling some of the most significant challenges in science, security, and sustainability. If you're passionate about making a real impact and want to be part of a community that values ethical excellence, this is the place where your ambition can thrive. Here, we believe that success comes from continuously pushing boundaries and working together to deliver on our promises. We embrace challenges with confidence and are dedicated to creating a secure and vibrant future for all. We'll inspire and empower you to deliver your best work so you can evolve, grow and succeed - today and into tomorrow. We offer an exciting range of opportunities to develop your career within a supportive team who always strive to do the right thing for our people, clients and communities. People are our greatest asset, and we offer a competitive package to retain and attract the best talent. In addition to the benefits you'd expect, UK employees also receive free single medical cover and digital GP service, family friendly benefits such as enhanced parental leave pay and free membership of employee assistance and parental programmes, plus reimbursement towards relevant professional development and memberships. Work life balance and flexibility is a key focus area for us. We're happy to discuss hybrid, part time and flexible working hours, patterns and locations to suit you and our business. Our Culture Our values are built on a strong foundation of safety, integrity, and respect for every individual. People are at the heart of our mission, and we believe in supporting one another through a culture of care and collaboration. We strive to create a workplace where everyone feels they belong and can thrive. Supporting mental wellbeing and fostering a sense of connection are essential to how we work. When we embrace different perspectives and work together, we become more innovative, more agile, and more successful. We partner with VERCIDA, for greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team. Role Description To design, develop, implement and test HMI/SCADA control systems, producing high quality and comprehensive engineering design documentation such as: Requirements capture and traceability documentation (URS/RTM) / System / Functional Design Specifications (SDD/FDS) / Mimic Specifications & Coding Standards / Detailed Software System Specifications (SSS) / Test Specifications (Module/Integration/System/Hardware) / Operation & Maintenance Manuals (O&M) / System Rebuild Documentation / I/O, Alarm & Message Schedules Support with project Lifetime Quality Records In addition to the above, the role shall support the Technical Lead Engineer and Project Manager in maintaining the planned delivery schedule, reporting technical issues, changes in scope and variations to the programmed activities where necessary. Designing and implementing HMI/SCADA applications (such as Rockwell FactoryTalk View), producing standardised modules/objects, control faceplates and display screens in accordance with the design documentation and engineering standards. Work closely with PLC software engineers to develop the control system architecture, supporting Network Architecture Diagram(s) and applicable interfacing documentation, to support the visualisation of the plant system via an integrated Cyber Secure SCADA system. Undertake in house testing of the PLC and SCADA integrated control system with the customer in a formal, controlled manner, ensuring change control and version management is maintained and recorded. Site acceptance testing (commissioning) may also be required following delivery and installation. Support the generation of installation and commissioning documentation, Operator and Maintenance Manuals and plant personnel training material. Requirements A technical understanding of engineering design drawings, mainly in relation to control system cubicles, enclosures and interface panels, to assist in ascertaining constraints and design impacts from site visits, working in collaboration with the engineering teams and stakeholders to produce designs and SCADA software to a high quality level. Proficient in the design and implementation of HMI/SCADA control systems, ideally fully converse with the Rockwell FactoryTalk View application. Experience with ergonomic design and Human Factor considerations for Graphical User Interfaces. Excellent understanding of SCADA programming, object oriented scripting (C++, VBScript, Python, etc), PC/Server hardware and software, and communication protocols used in industrial (OT) control systems. Experience with database/historian systems using SQL scripting. Significant demonstrable SCADA experience in EC&I industry (preferably Nuclear). Meticulous attention to detail to ensure accuracy, reliability and consistency in SCADA mimic screens, functional scripting, and system interfacing. Experience in producing control system functional specifications, detailed design documentation and formal Test Specifications to a high quality level. Experience in network integration of industrial control systems, databases and third party applications with SCADA applications. Experience in undertaking formal and controlled testing and validation activities. Excellent fault finding and troubleshooting skills with the ability to analyse complex systems, identify problems, and implement effective solutions. Ability to work as part of an Integrated Delivery Team or individually, working within sometimes restrictive time constraints. Demonstrate excellent written and verbal communication skills. Proficient in Microsoft Office with strong technical documentation writing skills. Have strong interpersonal skills and be able to interact with people at all levels. A Bachelor's Degree in Engineering or related field OR demonstrable evidence of experience with a high emphasis on EC&I engineering using SCADA systems. Compensation Details GBP The compensation range or hourly rate listed for this position is provided as a good faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting 03/06/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Equal Opportunity Employer Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
Apr 29, 2026
Full time
At Amentum, we're not just solving problems; we're engineering the future. Our team is driven by an unyielding commitment to innovation, integrity, and collaboration, tackling some of the most significant challenges in science, security, and sustainability. If you're passionate about making a real impact and want to be part of a community that values ethical excellence, this is the place where your ambition can thrive. Here, we believe that success comes from continuously pushing boundaries and working together to deliver on our promises. We embrace challenges with confidence and are dedicated to creating a secure and vibrant future for all. We'll inspire and empower you to deliver your best work so you can evolve, grow and succeed - today and into tomorrow. We offer an exciting range of opportunities to develop your career within a supportive team who always strive to do the right thing for our people, clients and communities. People are our greatest asset, and we offer a competitive package to retain and attract the best talent. In addition to the benefits you'd expect, UK employees also receive free single medical cover and digital GP service, family friendly benefits such as enhanced parental leave pay and free membership of employee assistance and parental programmes, plus reimbursement towards relevant professional development and memberships. Work life balance and flexibility is a key focus area for us. We're happy to discuss hybrid, part time and flexible working hours, patterns and locations to suit you and our business. Our Culture Our values are built on a strong foundation of safety, integrity, and respect for every individual. People are at the heart of our mission, and we believe in supporting one another through a culture of care and collaboration. We strive to create a workplace where everyone feels they belong and can thrive. Supporting mental wellbeing and fostering a sense of connection are essential to how we work. When we embrace different perspectives and work together, we become more innovative, more agile, and more successful. We partner with VERCIDA, for greater online accessibility please visit to view and access our roles. As a Disability Confident employer, we will interview all disabled applicants who meet the minimum criteria for a vacancy. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team. Role Description To design, develop, implement and test HMI/SCADA control systems, producing high quality and comprehensive engineering design documentation such as: Requirements capture and traceability documentation (URS/RTM) / System / Functional Design Specifications (SDD/FDS) / Mimic Specifications & Coding Standards / Detailed Software System Specifications (SSS) / Test Specifications (Module/Integration/System/Hardware) / Operation & Maintenance Manuals (O&M) / System Rebuild Documentation / I/O, Alarm & Message Schedules Support with project Lifetime Quality Records In addition to the above, the role shall support the Technical Lead Engineer and Project Manager in maintaining the planned delivery schedule, reporting technical issues, changes in scope and variations to the programmed activities where necessary. Designing and implementing HMI/SCADA applications (such as Rockwell FactoryTalk View), producing standardised modules/objects, control faceplates and display screens in accordance with the design documentation and engineering standards. Work closely with PLC software engineers to develop the control system architecture, supporting Network Architecture Diagram(s) and applicable interfacing documentation, to support the visualisation of the plant system via an integrated Cyber Secure SCADA system. Undertake in house testing of the PLC and SCADA integrated control system with the customer in a formal, controlled manner, ensuring change control and version management is maintained and recorded. Site acceptance testing (commissioning) may also be required following delivery and installation. Support the generation of installation and commissioning documentation, Operator and Maintenance Manuals and plant personnel training material. Requirements A technical understanding of engineering design drawings, mainly in relation to control system cubicles, enclosures and interface panels, to assist in ascertaining constraints and design impacts from site visits, working in collaboration with the engineering teams and stakeholders to produce designs and SCADA software to a high quality level. Proficient in the design and implementation of HMI/SCADA control systems, ideally fully converse with the Rockwell FactoryTalk View application. Experience with ergonomic design and Human Factor considerations for Graphical User Interfaces. Excellent understanding of SCADA programming, object oriented scripting (C++, VBScript, Python, etc), PC/Server hardware and software, and communication protocols used in industrial (OT) control systems. Experience with database/historian systems using SQL scripting. Significant demonstrable SCADA experience in EC&I industry (preferably Nuclear). Meticulous attention to detail to ensure accuracy, reliability and consistency in SCADA mimic screens, functional scripting, and system interfacing. Experience in producing control system functional specifications, detailed design documentation and formal Test Specifications to a high quality level. Experience in network integration of industrial control systems, databases and third party applications with SCADA applications. Experience in undertaking formal and controlled testing and validation activities. Excellent fault finding and troubleshooting skills with the ability to analyse complex systems, identify problems, and implement effective solutions. Ability to work as part of an Integrated Delivery Team or individually, working within sometimes restrictive time constraints. Demonstrate excellent written and verbal communication skills. Proficient in Microsoft Office with strong technical documentation writing skills. Have strong interpersonal skills and be able to interact with people at all levels. A Bachelor's Degree in Engineering or related field OR demonstrable evidence of experience with a high emphasis on EC&I engineering using SCADA systems. Compensation Details GBP The compensation range or hourly rate listed for this position is provided as a good faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting 03/06/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Equal Opportunity Employer Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
Job Title: Control Systems Engineer Location: Lydney, Gloucestershire Pay Range/details: Competitive salary Contract Type: Permanent We are seeking a highly skilled Control Systems Engineer to join our client based in. This role involves hands-on PLC/SCADA development, functional safety integration, and on-site commissioning, ensuring maximum uptime, quality, and compliance Key Responsibilities - Control Systems Engineer Specify, program, modify, and test PLCs including Siemens TIA/Step7, Mitsubishi, and Beckhoff Design and implement functional safety architectures including light curtains, scanners, interlocks, safety PLCs, zoning, safe states, estops, and reset logic Produce safety documentation such as risk assessments, SRS, validation plans, proof-testing, and change logs in line with ISO 13849/IEC 62061 Develop HMI/SCADA systems, data acquisition, alarms, diagnostics, and performance dashboards Integrate cells with plant networks, historians, and MES systems where applicable Plan, schedule, and deliver projects from concept through handover, including FAT/SAT and minimal downtime upgrades Troubleshoot faults and implement root-cause fixes across electrical systems, PLCs, sensors, and communications Act as a point of contact for production and maintenance teams, providing training, operating procedures, and commissioning/maintenance guides Maintain version control, technical drawings (AutoCAD), and adhere to site standards, change control, and audit requirements Qualifications & Requirements - Control Systems Engineer HNC in Electrical, Controls, or Mechatronics, or equivalent experience Proven experience in PLC/HMI design and commissioning including Siemens TIA/Step7, Mitsubishi, and Beckhoff TC2 Hands-on functional safety integration experience including light curtains, door interlocks, scanners/radar, safety relays/PLCs HMI/SCADA development, fault-finding, and plant networking knowledge Strong diagnostics skills across sensors, VSDs/servo drives, and fieldbus systems such as Profinet/CC-Link Solid documentation discipline for URS/FS, FDS, test protocols, drawings, and change control Knowledge of industrial safety systems (ProfiSafe, TwinSafe, Pilz, SICK, Euchner) is preferred Recognised apprenticeship and industrial environment experience is advantageous Up-to-date knowledge of 18th Edition Wiring Regulations and programming structures such as EDDI What we can offer - Control Systems Engineer Opportunity for professional growth and development 33 days holiday per annum including statutory bank holidays Generous pension scheme Private medical insurance and life assurance Annual discretionary bonus 24/7 virtual GP consultations and wellbeing support (psychological, legal, financial, physical) Income protection and Healthshield cashback plan for medical expenses Support with physiotherapy and dentistry Retail discounts For more information on this role, please contact Charlie Boulton on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities within your chosen field, please visit our website: (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Apr 28, 2026
Full time
Job Title: Control Systems Engineer Location: Lydney, Gloucestershire Pay Range/details: Competitive salary Contract Type: Permanent We are seeking a highly skilled Control Systems Engineer to join our client based in. This role involves hands-on PLC/SCADA development, functional safety integration, and on-site commissioning, ensuring maximum uptime, quality, and compliance Key Responsibilities - Control Systems Engineer Specify, program, modify, and test PLCs including Siemens TIA/Step7, Mitsubishi, and Beckhoff Design and implement functional safety architectures including light curtains, scanners, interlocks, safety PLCs, zoning, safe states, estops, and reset logic Produce safety documentation such as risk assessments, SRS, validation plans, proof-testing, and change logs in line with ISO 13849/IEC 62061 Develop HMI/SCADA systems, data acquisition, alarms, diagnostics, and performance dashboards Integrate cells with plant networks, historians, and MES systems where applicable Plan, schedule, and deliver projects from concept through handover, including FAT/SAT and minimal downtime upgrades Troubleshoot faults and implement root-cause fixes across electrical systems, PLCs, sensors, and communications Act as a point of contact for production and maintenance teams, providing training, operating procedures, and commissioning/maintenance guides Maintain version control, technical drawings (AutoCAD), and adhere to site standards, change control, and audit requirements Qualifications & Requirements - Control Systems Engineer HNC in Electrical, Controls, or Mechatronics, or equivalent experience Proven experience in PLC/HMI design and commissioning including Siemens TIA/Step7, Mitsubishi, and Beckhoff TC2 Hands-on functional safety integration experience including light curtains, door interlocks, scanners/radar, safety relays/PLCs HMI/SCADA development, fault-finding, and plant networking knowledge Strong diagnostics skills across sensors, VSDs/servo drives, and fieldbus systems such as Profinet/CC-Link Solid documentation discipline for URS/FS, FDS, test protocols, drawings, and change control Knowledge of industrial safety systems (ProfiSafe, TwinSafe, Pilz, SICK, Euchner) is preferred Recognised apprenticeship and industrial environment experience is advantageous Up-to-date knowledge of 18th Edition Wiring Regulations and programming structures such as EDDI What we can offer - Control Systems Engineer Opportunity for professional growth and development 33 days holiday per annum including statutory bank holidays Generous pension scheme Private medical insurance and life assurance Annual discretionary bonus 24/7 virtual GP consultations and wellbeing support (psychological, legal, financial, physical) Income protection and Healthshield cashback plan for medical expenses Support with physiotherapy and dentistry Retail discounts For more information on this role, please contact Charlie Boulton on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities within your chosen field, please visit our website: (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
We are supporting a Battery Energy Storage System project and are seeking an experienced SCADA / Automation Engineer to support commissioning and integration activities on a live, safety-critical site. This is a hands-on engineering role, requiring strong practical experience rather than purely design or office-based SCADA work. Key Responsibilities Support SCADA and automation system integration on a BESS site Work with PLC systems and industrial communications Configure and troubleshoot Modbus (TCP/RTU) Support fibre optic communications setup and testing Assist with commissioning and site integration activities Map SCADA systems to physical site equipment Provide both on-site and remote technical support Essential Experience Strong SCADA / Automation engineering background Hands-on experience with PLC systems Solid understanding of Modbus communications Experience with fibre optic / industrial networking systems Commissioning / installation / site-based experience Comfortable working in live operational environments Must be hands-on and technically delivery-focused Desirable BESS / battery storage / renewables experience Exposure to IEC 61850 environments HMI / systems integration experience If this role is of interest, please click Apply and attach your updated CV, and I will be in touch to discuss further.
Apr 28, 2026
Contractor
We are supporting a Battery Energy Storage System project and are seeking an experienced SCADA / Automation Engineer to support commissioning and integration activities on a live, safety-critical site. This is a hands-on engineering role, requiring strong practical experience rather than purely design or office-based SCADA work. Key Responsibilities Support SCADA and automation system integration on a BESS site Work with PLC systems and industrial communications Configure and troubleshoot Modbus (TCP/RTU) Support fibre optic communications setup and testing Assist with commissioning and site integration activities Map SCADA systems to physical site equipment Provide both on-site and remote technical support Essential Experience Strong SCADA / Automation engineering background Hands-on experience with PLC systems Solid understanding of Modbus communications Experience with fibre optic / industrial networking systems Commissioning / installation / site-based experience Comfortable working in live operational environments Must be hands-on and technically delivery-focused Desirable BESS / battery storage / renewables experience Exposure to IEC 61850 environments HMI / systems integration experience If this role is of interest, please click Apply and attach your updated CV, and I will be in touch to discuss further.
PSR Solutions are currently recruiting for an Associate Director role in London. This will be working for a well established contractor within the Rail, M&E and Civils experience. Key Responsibilities Leadership & Team Building Build, lead, and mentor a high-performing Electrical Engineering team. Foster a culture of technical excellence, innovation, and continuous development. Technical Oversight & Design Lead the design and assurance of complex electrical systems (LV/HV up to 33kV, lighting, CMS, SCADA, UPS, BMS, etc.). Ensure full compliance with safety standards, industry regulations (including BS 7671 and ATEX), and internal processes. Strategic & Operational Development Establish and enhance internal design capability, processes, and tools. Drive technical input into tenders, business development, and client engagements. Governance & Safety Oversee peer reviews, technical audits, and post-project learning. Support investigations and ensure engineering safety across all project phases. Continuous Improvement & Innovation Lead initiatives around BIM integration, compliance, sustainability, and digital engineering. Champion CPD, knowledge sharing, and the embedding of best practices. Skills & Experience Essential: Expertise across electrical design, process systems, hazardous area compliance, and BIM integration. In-depth experience in LV/HV systems, protective devices, control systems (SCADA, DCS, PLC), and power distribution. Strong leadership and mentoring skills with a track record of team and capability development. Clear understanding of CDM, DSEAR, and electrical safety legislation. Qualifications Essential: Degree in Electrical Engineering. Chartered Engineer (CEng) with a relevant institution (IET, IMechE, CIBSE). NEBOSH Construction Certificate. BS 7671 (18th Edition) & C&G 2391-52 (Inspection & Testing). Full UK Driving Licence. Competencies & Behaviours Decisive, adaptable, and collaborative under pressure. Excellent communication skills at all organisational levels. Strong client-facing ability-able to balance commercial and technical needs. Committed to mentoring, CPD, and national travel when required. Fluent in English (written and verbal); confident in technical reporting. Experience Required Minimum 15 years' experience in infrastructure or heavy industrial projects. Strong hands-on background as a Design Engineer, Project Engineer, and Commissioning Engineer. Ideally has worked across both contractor and client-side roles, with exposure to Network Rail CRE responsibilities
Apr 28, 2026
Full time
PSR Solutions are currently recruiting for an Associate Director role in London. This will be working for a well established contractor within the Rail, M&E and Civils experience. Key Responsibilities Leadership & Team Building Build, lead, and mentor a high-performing Electrical Engineering team. Foster a culture of technical excellence, innovation, and continuous development. Technical Oversight & Design Lead the design and assurance of complex electrical systems (LV/HV up to 33kV, lighting, CMS, SCADA, UPS, BMS, etc.). Ensure full compliance with safety standards, industry regulations (including BS 7671 and ATEX), and internal processes. Strategic & Operational Development Establish and enhance internal design capability, processes, and tools. Drive technical input into tenders, business development, and client engagements. Governance & Safety Oversee peer reviews, technical audits, and post-project learning. Support investigations and ensure engineering safety across all project phases. Continuous Improvement & Innovation Lead initiatives around BIM integration, compliance, sustainability, and digital engineering. Champion CPD, knowledge sharing, and the embedding of best practices. Skills & Experience Essential: Expertise across electrical design, process systems, hazardous area compliance, and BIM integration. In-depth experience in LV/HV systems, protective devices, control systems (SCADA, DCS, PLC), and power distribution. Strong leadership and mentoring skills with a track record of team and capability development. Clear understanding of CDM, DSEAR, and electrical safety legislation. Qualifications Essential: Degree in Electrical Engineering. Chartered Engineer (CEng) with a relevant institution (IET, IMechE, CIBSE). NEBOSH Construction Certificate. BS 7671 (18th Edition) & C&G 2391-52 (Inspection & Testing). Full UK Driving Licence. Competencies & Behaviours Decisive, adaptable, and collaborative under pressure. Excellent communication skills at all organisational levels. Strong client-facing ability-able to balance commercial and technical needs. Committed to mentoring, CPD, and national travel when required. Fluent in English (written and verbal); confident in technical reporting. Experience Required Minimum 15 years' experience in infrastructure or heavy industrial projects. Strong hands-on background as a Design Engineer, Project Engineer, and Commissioning Engineer. Ideally has worked across both contractor and client-side roles, with exposure to Network Rail CRE responsibilities
Senior Electrical Design Engineer Location: Manchester Sector: Water / Infrastructure An exciting opportunity has arisen for a Senior Electrical Engineer to join a leading design and build organisation delivering major infrastructure projects across the UK water sector. With a strong pipeline of work secured through long-term framework agreements, this role offers excellent career progression within a high-performing and well-established engineering environment. You will be joining a business at the forefront of the UK water industry, contributing to multi-billion-pound investment programmes focused on improving wastewater treatment, reducing environmental impact, and enhancing water infrastructure across the North West. The Role: As a Senior Electrical Engineer, you will play a key role across the full project lifecycle from concept design through to commissioning. You ll be involved in delivering innovative and sustainable engineering solutions that directly impact communities and the environment. Key Responsibilities: Prepare and review electrical designs for water and wastewater treatment systems Work with systems including MCCs, LV distribution, cabling, instrumentation, PLCs, SCADA, and industrial networks Produce and review technical specifications and support procurement activities Evaluate supplier tenders and technical submissions Mentor and support junior engineers and graduates Ensure compliance with design standards and industry regulations Build strong working relationships with stakeholders and project teams Requirements: Degree in Electrical Engineering or a related discipline Chartered or Incorporated Engineer status (or working towards), or equivalent experience Proven experience delivering high-quality engineering solutions within regulated environments Strong understanding of design, safety, and quality standards What s on Offer: Opportunity to work on high-value, long-term infrastructure projects Career development within a supportive and forward-thinking organisation Competitive salary and benefits package If you re looking to make a real impact within the water sector and take the next step in your engineering career, this could be the role for you.
Apr 27, 2026
Full time
Senior Electrical Design Engineer Location: Manchester Sector: Water / Infrastructure An exciting opportunity has arisen for a Senior Electrical Engineer to join a leading design and build organisation delivering major infrastructure projects across the UK water sector. With a strong pipeline of work secured through long-term framework agreements, this role offers excellent career progression within a high-performing and well-established engineering environment. You will be joining a business at the forefront of the UK water industry, contributing to multi-billion-pound investment programmes focused on improving wastewater treatment, reducing environmental impact, and enhancing water infrastructure across the North West. The Role: As a Senior Electrical Engineer, you will play a key role across the full project lifecycle from concept design through to commissioning. You ll be involved in delivering innovative and sustainable engineering solutions that directly impact communities and the environment. Key Responsibilities: Prepare and review electrical designs for water and wastewater treatment systems Work with systems including MCCs, LV distribution, cabling, instrumentation, PLCs, SCADA, and industrial networks Produce and review technical specifications and support procurement activities Evaluate supplier tenders and technical submissions Mentor and support junior engineers and graduates Ensure compliance with design standards and industry regulations Build strong working relationships with stakeholders and project teams Requirements: Degree in Electrical Engineering or a related discipline Chartered or Incorporated Engineer status (or working towards), or equivalent experience Proven experience delivering high-quality engineering solutions within regulated environments Strong understanding of design, safety, and quality standards What s on Offer: Opportunity to work on high-value, long-term infrastructure projects Career development within a supportive and forward-thinking organisation Competitive salary and benefits package If you re looking to make a real impact within the water sector and take the next step in your engineering career, this could be the role for you.
Be part of a forward-thinking engineering business delivering advanced control and automation solutions across energy, infrastructure, and technology sectors throughout the UK. With strong growth, a collaborative culture, and a focus on innovation and ownership, this is an excellent opportunity for a senior/lead engineer looking to make a real impact. Lead Control Systems Engineer £55,000 - £60,000 + Pension, Profit Share, Paid Overtime, On-Site Gym Derbyshire Ref: 25362 Lead Control Systems Engineer - The Role: As a Lead Control Systems Engineer, you will take a key role in delivering complex BESS and infrastructure projects, overseeing full project life cycles and supporting junior engineers within the team. Lead PLC, HMI & SCADA software design and development for bespoke systems Take ownership of technical delivery across multiple projects Design and configure industrial networks Act as a key point of contact for customers throughout project life cycles Oversee and contribute to documentation including FDS, FAT & SAT Support site installation and commissioning activities Provide mentorship and technical guidance to junior engineers Lead Control Systems Engineer - The Person: Strong background in PLC, HMI and/or SCADA systems design ( Siemens, Schneider or Rockwell preferred ) Proven experience delivering projects from concept through to commissioning Ability to lead projects and support/mentor engineers Competent in reading and modifying electrical schematics (design capability advantageous) Experienced in FAT/SAT processes and associated documentation Degree qualified in an electrical or related discipline (preferred, not essential) Strong communication skills and ability to liaise directly with customers Lead Control Systems Engineer - Additional Information: Office-based role with approximately 20% travel to UK sites Fast-growing business (turnover increased significantly in recent years) offering genuine progression opportunities Varied, technically challenging projects with high levels of autonomy Located in Derbyshire, this role would be commutable from Derby, Nottingham, Burton-upon-Trent, Mansfield, Castle Donnington and surrounding areas. For further information call John Anderson AE1
Apr 26, 2026
Full time
Be part of a forward-thinking engineering business delivering advanced control and automation solutions across energy, infrastructure, and technology sectors throughout the UK. With strong growth, a collaborative culture, and a focus on innovation and ownership, this is an excellent opportunity for a senior/lead engineer looking to make a real impact. Lead Control Systems Engineer £55,000 - £60,000 + Pension, Profit Share, Paid Overtime, On-Site Gym Derbyshire Ref: 25362 Lead Control Systems Engineer - The Role: As a Lead Control Systems Engineer, you will take a key role in delivering complex BESS and infrastructure projects, overseeing full project life cycles and supporting junior engineers within the team. Lead PLC, HMI & SCADA software design and development for bespoke systems Take ownership of technical delivery across multiple projects Design and configure industrial networks Act as a key point of contact for customers throughout project life cycles Oversee and contribute to documentation including FDS, FAT & SAT Support site installation and commissioning activities Provide mentorship and technical guidance to junior engineers Lead Control Systems Engineer - The Person: Strong background in PLC, HMI and/or SCADA systems design ( Siemens, Schneider or Rockwell preferred ) Proven experience delivering projects from concept through to commissioning Ability to lead projects and support/mentor engineers Competent in reading and modifying electrical schematics (design capability advantageous) Experienced in FAT/SAT processes and associated documentation Degree qualified in an electrical or related discipline (preferred, not essential) Strong communication skills and ability to liaise directly with customers Lead Control Systems Engineer - Additional Information: Office-based role with approximately 20% travel to UK sites Fast-growing business (turnover increased significantly in recent years) offering genuine progression opportunities Varied, technically challenging projects with high levels of autonomy Located in Derbyshire, this role would be commutable from Derby, Nottingham, Burton-upon-Trent, Mansfield, Castle Donnington and surrounding areas. For further information call John Anderson AE1
Job title: Controls Systems Engineer Location: Royston, UK (site based) Working within the Engineering support Team and reporting to the Controls System Lead Engineer, the Software/Controls Engineer (SCE) is responsible for designing, installing, managing and/or maintaining equipment and software on PLC and SCADA systems, which are used to monitor and control the plant systems at Royston. Much of your time will be spent on software orientated tasks including but not limited to: fault finding, testing of Logic coding, implementing changes to the existing Controls Infrastructure in line with actions arising from MOC requests, attend HAZOP Studies / PHA's etc as a Software and Controls representative. Provide Software and Controls input for projects for the site, this could be modifications to existing systems or new installations altogether. World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Controls System engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. PGMS has manufacturing operations in the UK, US and China and sells to key markets globally across Europe, the US and Asia. The role: As a Controls Systems Engineer, you will help drive our goals by: Supporting the projects teams at initial design stages to offer advice on the selection of software and controls equipment to ensure improved levels of plant reliability and maintainability, designing, developing, installing, managing and/or maintaining equipment and software as required. Implement and continually review the controls strategy to ensure business needs, both current and future are maintained and developed. Implement recognised standards with regards to alarm management and safety related control functions so that process safety is delivered. Provide expert knowledge of PLC systems, JM preferred is Omron and Allen-Bradley. Provide expert knowledge of SCADA systems, JM preferred is Wonderware (Intouch) and Inductive Automation's (Ignition) SCADA packages. Lead completion of software related breakdowns and reactive plant support Ongoing monitoring and maintenance of the controls network infrastructure including but not limited to: o Server Health monitoring o Data replication / backup verifications o Database administration for IACS. Key skills that will help you succeed in this role: Hold a formal Electronic/Controls qualification such as Degree, HNC/HND or equivalent recognised Training Strong hands-on experience with PLC programming, modification, and fault-finding across Rockwell Automation (Control Logix, CompactLogix) and Omron (CS1/CJ series) platforms Proficient in Studio 5000 / RS Logix 5000 for Rockwell Systems and CX-Programmer for Omron systems Competent in commissioning, testing, and maintaining Industrial Control Systems in a live production environment Experience integrating PLCs with SCADA/HMI Systems, including Intouch (Wonderware), Ignition (Inductive Automation) and FactoryTalk View SE/ME (Rockwell) Skilled in diagnosing communication issues across Ethernet/IP, Device net, Profibus and Omron FINS networks Work Environment: The work environment is mostly office based with occasional visits to the operational areas, both pyrometallurgical and Hydrometallurgical. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Apr 26, 2026
Full time
Job title: Controls Systems Engineer Location: Royston, UK (site based) Working within the Engineering support Team and reporting to the Controls System Lead Engineer, the Software/Controls Engineer (SCE) is responsible for designing, installing, managing and/or maintaining equipment and software on PLC and SCADA systems, which are used to monitor and control the plant systems at Royston. Much of your time will be spent on software orientated tasks including but not limited to: fault finding, testing of Logic coding, implementing changes to the existing Controls Infrastructure in line with actions arising from MOC requests, attend HAZOP Studies / PHA's etc as a Software and Controls representative. Provide Software and Controls input for projects for the site, this could be modifications to existing systems or new installations altogether. World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Controls System engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. PGMS has manufacturing operations in the UK, US and China and sells to key markets globally across Europe, the US and Asia. The role: As a Controls Systems Engineer, you will help drive our goals by: Supporting the projects teams at initial design stages to offer advice on the selection of software and controls equipment to ensure improved levels of plant reliability and maintainability, designing, developing, installing, managing and/or maintaining equipment and software as required. Implement and continually review the controls strategy to ensure business needs, both current and future are maintained and developed. Implement recognised standards with regards to alarm management and safety related control functions so that process safety is delivered. Provide expert knowledge of PLC systems, JM preferred is Omron and Allen-Bradley. Provide expert knowledge of SCADA systems, JM preferred is Wonderware (Intouch) and Inductive Automation's (Ignition) SCADA packages. Lead completion of software related breakdowns and reactive plant support Ongoing monitoring and maintenance of the controls network infrastructure including but not limited to: o Server Health monitoring o Data replication / backup verifications o Database administration for IACS. Key skills that will help you succeed in this role: Hold a formal Electronic/Controls qualification such as Degree, HNC/HND or equivalent recognised Training Strong hands-on experience with PLC programming, modification, and fault-finding across Rockwell Automation (Control Logix, CompactLogix) and Omron (CS1/CJ series) platforms Proficient in Studio 5000 / RS Logix 5000 for Rockwell Systems and CX-Programmer for Omron systems Competent in commissioning, testing, and maintaining Industrial Control Systems in a live production environment Experience integrating PLCs with SCADA/HMI Systems, including Intouch (Wonderware), Ignition (Inductive Automation) and FactoryTalk View SE/ME (Rockwell) Skilled in diagnosing communication issues across Ethernet/IP, Device net, Profibus and Omron FINS networks Work Environment: The work environment is mostly office based with occasional visits to the operational areas, both pyrometallurgical and Hydrometallurgical. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Senior Reliability Maintenance Engineering Technician Job ID: Amazon UK Services Ltd. Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key Job Responsibilities Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes. Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required. Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers. Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible. Support in finding ways to continually improve systems and standardise processes across the EU network. A Day in the Life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the Team Our Reliability Maintenance Engineering or RME team keeps our equipment performing at its best. We are a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Basic Qualifications Served a full Engineering indentured Apprenticeship and/or qualified to a minimum of NVQ Level 3 or equivalent in a relevant Engineering subject (City & Guilds Level 3, SVQ/IVQ). Relevant experience in a technical leadership role. Relevant experience working in both electrical and mechanical disciplines. Relevant experience in automation or material handling equipment environments. Advanced English proficiency in verbal and written. Preferred Qualifications Preferred qualifications are not required to apply for a position at Amazon. If you have all the basic qualifications above, we'd love to hear from you. Experience working in a multi-contractor and multi-site working environment. Understanding of PLC based controls systems and statutory compliance requirements. Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks. A degree preferably in a technical discipline, operations, or business administration. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Posted: March 6, 2026
Apr 26, 2026
Full time
Senior Reliability Maintenance Engineering Technician Job ID: Amazon UK Services Ltd. Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key Job Responsibilities Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes. Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required. Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers. Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible. Support in finding ways to continually improve systems and standardise processes across the EU network. A Day in the Life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the Team Our Reliability Maintenance Engineering or RME team keeps our equipment performing at its best. We are a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Basic Qualifications Served a full Engineering indentured Apprenticeship and/or qualified to a minimum of NVQ Level 3 or equivalent in a relevant Engineering subject (City & Guilds Level 3, SVQ/IVQ). Relevant experience in a technical leadership role. Relevant experience working in both electrical and mechanical disciplines. Relevant experience in automation or material handling equipment environments. Advanced English proficiency in verbal and written. Preferred Qualifications Preferred qualifications are not required to apply for a position at Amazon. If you have all the basic qualifications above, we'd love to hear from you. Experience working in a multi-contractor and multi-site working environment. Understanding of PLC based controls systems and statutory compliance requirements. Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks. A degree preferably in a technical discipline, operations, or business administration. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Posted: March 6, 2026
Description The Airport Duty Engineer (ADE) is a key technical specialist responsible for monitoring and controlling a range of essential airport engineering systems, including taking a leading role in managing Heathrow's low voltage network. In this role, you will routinely carry out LV switching to support maintenance and project work, while working towards and maintaining Authorised Person status across systems such as LV, Aeronautical Ground Lighting, Generators, and the Track Transit System. You'll play a critical part in operational resilience by making informed decisions during incidents or disruptions that could impact safety or airport operations. Reporting to the Airport Senior Engineering Manager, you will help ensure compliance with engineering standards and legislation, and during major events, you may provide on site management and deliver timely updates to the Control Room. This is a full time, on site role that operates on a rotating shift pattern involving both day and night shifts. Responsibilities Monitor critical engineering systems within APOC alongside the ASEM, using tools such as SCADA to identify issues early and support proactive decision making. Lead the engineering response during incidents, acting as the on site lead and liaison with senior managers while supporting the ASEM in key operational decisions. Act as a Control Engineer and Authorised Person, ensuring compliance with all regulations, issuing and monitoring safety documentation, and managing conflicts within Safe Systems of Work. Control multiple essential airport systems, including the high/low voltage network, fire mains, hot water systems, aeronautical ground lighting, potable and grey water systems, storm and pollution control, and foul water pumping. Provide technical support and maintain specialist authorisations, offering expert judgement to internal teams through continuous training and assessment. Lead audits and reporting, identifying risks, tracking progress, and ensuring resilience planning through detailed reports and oversight of internal and external work. Support talent development and coordinate LV switching, providing coaching and mentoring while preparing and approving LV switching schedules and documentation. Qualifications City and Guilds LVL3, NVQ3, HNC or above in an appropriate Engineering discipline. Experienced in communicating with all levels of the organisation, dealing professionally with colleagues, customers, and business partners. Full UK driving license and ability to obtain airside manoeuvring area driving license. Desirable Appointed as an Authorised Person within a Heathrow safe system of work. Practical experience in electrical engineering and management of electrical distribution systems and switching. Understands maintenance terminology, experienced in leading people with the ability to be flexible, adapt to change and work under pressure.
Apr 26, 2026
Full time
Description The Airport Duty Engineer (ADE) is a key technical specialist responsible for monitoring and controlling a range of essential airport engineering systems, including taking a leading role in managing Heathrow's low voltage network. In this role, you will routinely carry out LV switching to support maintenance and project work, while working towards and maintaining Authorised Person status across systems such as LV, Aeronautical Ground Lighting, Generators, and the Track Transit System. You'll play a critical part in operational resilience by making informed decisions during incidents or disruptions that could impact safety or airport operations. Reporting to the Airport Senior Engineering Manager, you will help ensure compliance with engineering standards and legislation, and during major events, you may provide on site management and deliver timely updates to the Control Room. This is a full time, on site role that operates on a rotating shift pattern involving both day and night shifts. Responsibilities Monitor critical engineering systems within APOC alongside the ASEM, using tools such as SCADA to identify issues early and support proactive decision making. Lead the engineering response during incidents, acting as the on site lead and liaison with senior managers while supporting the ASEM in key operational decisions. Act as a Control Engineer and Authorised Person, ensuring compliance with all regulations, issuing and monitoring safety documentation, and managing conflicts within Safe Systems of Work. Control multiple essential airport systems, including the high/low voltage network, fire mains, hot water systems, aeronautical ground lighting, potable and grey water systems, storm and pollution control, and foul water pumping. Provide technical support and maintain specialist authorisations, offering expert judgement to internal teams through continuous training and assessment. Lead audits and reporting, identifying risks, tracking progress, and ensuring resilience planning through detailed reports and oversight of internal and external work. Support talent development and coordinate LV switching, providing coaching and mentoring while preparing and approving LV switching schedules and documentation. Qualifications City and Guilds LVL3, NVQ3, HNC or above in an appropriate Engineering discipline. Experienced in communicating with all levels of the organisation, dealing professionally with colleagues, customers, and business partners. Full UK driving license and ability to obtain airside manoeuvring area driving license. Desirable Appointed as an Authorised Person within a Heathrow safe system of work. Practical experience in electrical engineering and management of electrical distribution systems and switching. Understands maintenance terminology, experienced in leading people with the ability to be flexible, adapt to change and work under pressure.
I am seeking a commercially driven Business Development Manager to support the growth of activities across the UK power and energy infrastructure sector. The role will focus on identifying and securing new business opportunities across a diverse portfolio including power systems automation (protection, control, SCADA and telecoms), electrical substation design, grid compliance studies, and panel build projects. This is a key role within the business, working closely with technical and commercial teams to develop long-term client relationships and convert opportunities into profitable work. Key Responsibilities: Deliver against agreed sales and growth targets across defined markets and service lines. Identify, develop, and secure new business opportunities within DNOs, ICPs, EPC contractors, and renewable energy developers (including BESS, solar, and wind). Build and maintain strong relationships with key clients, partners, and industry stakeholders. Support the preparation of bids, tenders, PQQs, and proposal submissions in collaboration with engineering and commercial teams. Monitor market activity, frameworks, and procurement portals to identify upcoming opportunities. Maintain a healthy and active sales pipeline aligned with company growth objectives. Prepare and update capability statements, presentations, and supporting bid documentation. Work with senior leadership to support commercial strategy, pricing approaches, and partnership development. Represent the company at industry events, conferences, and networking opportunities. Support marketing and business development initiatives, including digital content and LinkedIn engagement. Provide regular reporting on pipeline activity, wins/losses, forecasts, and market intelligence. Manage and develop relationships with OEM partners as UK channel representatives, including performance reporting and forecasting. Travel within the UK and occasionally internationally for client meetings, site visits, and industry engagement. Be flexible in working hours where required to meet client and project demands. Minimum Requirements: Education: Degree in Electrical Engineering, Business, or a related discipline (preferred). Experience: 5+ years in business development, commercial, or sales roles within the UK/European energy, utilities, or engineering sectors. Proven track record of achieving and exceeding sales targets. Strong understanding of UK energy infrastructure markets, including DNOs, ICPs, and data centre frameworks. Skills & Attributes: Strong client-facing and relationship management skills. Excellent negotiation and presentation abilities. Strong written and verbal communication skills. Commercially aware with the ability to interpret financial and tender documentation. Proficient in MS Office, CRM systems, and LinkedIn for professional networking. Ability to work collaboratively across technical and commercial teams. Experience managing or mentoring team members is desirable. Other Requirements: Must be eligible to work in the UK. Full UK driving licence required. Willingness to travel as required across the UK and occasionally overseas. This is an opportunity to join a growing and ambitious organisation operating at the forefront of UK energy infrastructure, where your contribution will directly shape future growth and success. The salary is 50,000 to 70,000 plus benefits including bonus.
Apr 25, 2026
Full time
I am seeking a commercially driven Business Development Manager to support the growth of activities across the UK power and energy infrastructure sector. The role will focus on identifying and securing new business opportunities across a diverse portfolio including power systems automation (protection, control, SCADA and telecoms), electrical substation design, grid compliance studies, and panel build projects. This is a key role within the business, working closely with technical and commercial teams to develop long-term client relationships and convert opportunities into profitable work. Key Responsibilities: Deliver against agreed sales and growth targets across defined markets and service lines. Identify, develop, and secure new business opportunities within DNOs, ICPs, EPC contractors, and renewable energy developers (including BESS, solar, and wind). Build and maintain strong relationships with key clients, partners, and industry stakeholders. Support the preparation of bids, tenders, PQQs, and proposal submissions in collaboration with engineering and commercial teams. Monitor market activity, frameworks, and procurement portals to identify upcoming opportunities. Maintain a healthy and active sales pipeline aligned with company growth objectives. Prepare and update capability statements, presentations, and supporting bid documentation. Work with senior leadership to support commercial strategy, pricing approaches, and partnership development. Represent the company at industry events, conferences, and networking opportunities. Support marketing and business development initiatives, including digital content and LinkedIn engagement. Provide regular reporting on pipeline activity, wins/losses, forecasts, and market intelligence. Manage and develop relationships with OEM partners as UK channel representatives, including performance reporting and forecasting. Travel within the UK and occasionally internationally for client meetings, site visits, and industry engagement. Be flexible in working hours where required to meet client and project demands. Minimum Requirements: Education: Degree in Electrical Engineering, Business, or a related discipline (preferred). Experience: 5+ years in business development, commercial, or sales roles within the UK/European energy, utilities, or engineering sectors. Proven track record of achieving and exceeding sales targets. Strong understanding of UK energy infrastructure markets, including DNOs, ICPs, and data centre frameworks. Skills & Attributes: Strong client-facing and relationship management skills. Excellent negotiation and presentation abilities. Strong written and verbal communication skills. Commercially aware with the ability to interpret financial and tender documentation. Proficient in MS Office, CRM systems, and LinkedIn for professional networking. Ability to work collaboratively across technical and commercial teams. Experience managing or mentoring team members is desirable. Other Requirements: Must be eligible to work in the UK. Full UK driving licence required. Willingness to travel as required across the UK and occasionally overseas. This is an opportunity to join a growing and ambitious organisation operating at the forefront of UK energy infrastructure, where your contribution will directly shape future growth and success. The salary is 50,000 to 70,000 plus benefits including bonus.
