179 jobs found

Quality Control Engineer Central Scotland with travel Permanent Competitive Salary + Car/Car Allowance + Flexible Benefits Summary We have an exciting new position available for an electrically biased quality control engineer to join us at NG Bailey. The quality engineer will be responsible for supporting electrical building service projects across Scotland, must have experience of the installation of electrical systems, and ideally would be based in the Glasgow-Edinburgh central belt region. The quality control engineer will conduct all aspects of quality control and project compliance with the project specific QCMS, ensuring that the electrical systems meet the required regulator, legislative and specification standards before they reach the customer, and will also provide guidance to the project quality team and relevant stakeholders, in all aspects of the project life cycle. Some of the key deliverables in this role will include: Demonstration appropriate health and safety awareness to ensure that the safety first and foremost message is visible and alive throughout all activities relating to the project. Work with the operations and commissioning teams to produce the project specific QCMS (quality control management system). Review and comment on work in progress drawings, to ensure accurate and relevant information is incorporated and drawings produced in accordance with relevant standards. Ensure all MEP systems to be installed are covered by an inspection and test plan, and that production, approval and completion is tracked. Monitor progress of installations and carry out surveillance of systems to ensure installation is in accordance with specification and standards. Work closely with the design and operation teams to ensure that NG Bailey preferred suppliers are used and engaged as early as possible. Work with supply chain manager to review quality of our supply chain, ensuring sub contractors understand and follow NGB internal procedures. Coordinate with sub contractors when information is required from them for any documentation. Ensure NGB approved products and materials are used, undertaking factory witness testing of major items of plan and equipment. Ensure relevant teams hold the necessary qualifications and competencies for which they are employed. Ensure any on site training requirements are taken. Carry out toolbox talks and deliver presentations where required. Undertake regular audits highlighting and escalating any non conformances or defects. Identify and escalate any project risks. Provide project reviews and reports where appropriate. Coordinate with operations and commissioning team to produce project QC and commissioning action plan. What we're looking for: Significant experience as an expert electrical engineer, or leader/supervisor with relevant electrical qualifications: A good understanding of electrical systems in a building services environment Electrical apprenticeship, or relevant electrical qualifications A good understanding of modern and traditional installation methods (compliant to relevant standards). CSCS Card, IOSH, CDM, SMSTS Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us : We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

Production Test Engineer 12-month contract Based in Bolton Offering 37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering 37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Kick-start your career with an exciting and fast-paced graduate development programme from the UK's largest B2B supplier of electrical equipment. Enjoy excellent rewards, hands-on learning and a clear pathway into sales leadership and business management. What's on Offer: 31,000 - 33,000 starting salary Two pay rises in your first year Profit share bonus + up to 1,800 tax-free training bonuses 25 days' holiday + matched employer pension contributions Fast progression into B2B sales and management Industry-leading, accredited training and mentorship Highly sociable company culture with opportunities to network with clients at events such as, golf days, football matches and motorsport About the Company This market-leading group is committed to developing future leaders. Their long-running graduate programme is designed for ambitious, commercially-focused graduates who want to learn how a successful business operates and progress into high-earning sales and management roles. The Role As a Graduate Trainee, you'll learn the business from the ground up, build strong customer relationships and progress into a field sales and business management position. Graduate Training Programme: First 6 Months Develop core knowledge of how the business operates - sales, warehouse, logistics, supply chain, administration, IT software, and marketing. Build a deep understanding of the product range and the electrical wholesale industry. Start building relationships, winning deals and advising customers face-to-face over the trade counter, e.g. electricians, contractors and tradespeople. Begin your formal sales training course, attend Head Office training and network with other Graduate Trainees. Complete workbook assessments and earn training bonuses for your progress. 6-12 Months Move into internal sales/account management, engaging with B2B customers by phone, e.g. construction companies, local government authorities, housing developers and hotels. Learn business development strategies and how to target and win new key accounts. 12 Months and Beyond Progress to a varied B2B field sales management role with higher earning potential. Travel locally in your company car to meet clients, socialise, discuss projects and build strong relationships. Work towards running your own business within the group, gaining experience in staff management, purchasing and profit and loss. Managers enjoy significant autonomy thanks to the company's decentralised structure. You must have: A full UK driving licence The ability to start a full-time role immediately Apply Today to Find Out More If you're driven, confident and ready to take on responsibility, this programme gives you everything you need to build a successful career in sales and management.

Kick-start your career with an exciting and fast-paced graduate development programme from the UK's largest B2B supplier of electrical equipment. Enjoy excellent rewards, hands-on learning and a clear pathway into sales leadership and business management. What's on Offer: 31,000 - 33,000 starting salary Two pay rises in your first year Profit share bonus + up to 1,800 tax-free training bonuses 25 days' holiday + matched employer pension contributions Fast progression into B2B sales and management Industry-leading, accredited training and mentorship Highly sociable company culture with opportunities to network with clients at events such as, golf days, football matches and motorsport About the Company This market-leading group is committed to developing future leaders. Their long-running graduate programme is designed for ambitious, commercially-focused graduates who want to learn how a successful business operates and progress into high-earning sales and management roles. The Role As a Graduate Trainee, you'll learn the business from the ground up, build strong customer relationships and progress into a field sales and business management position. Graduate Training Programme: First 6 Months Develop core knowledge of how the business operates - sales, warehouse, logistics, supply chain, administration, IT software, and marketing. Build a deep understanding of the product range and the electrical wholesale industry. Start building relationships, winning deals and advising customers face-to-face over the trade counter, e.g. electricians, contractors and tradespeople. Begin your formal sales training course, attend Head Office training and network with other Graduate Trainees. Complete workbook assessments and earn training bonuses for your progress. 6-12 Months Move into internal sales/account management, engaging with B2B customers by phone, e.g. construction companies, local government authorities, housing developers and hotels. Learn business development strategies and how to target and win new key accounts. 12 Months and Beyond Progress to a varied B2B field sales management role with higher earning potential. Travel locally in your company car to meet clients, socialise, discuss projects and build strong relationships. Work towards running your own business within the group, gaining experience in staff management, purchasing and profit and loss. Managers enjoy significant autonomy thanks to the company's decentralised structure. You must have: A full UK driving licence The ability to start a full-time role immediately Apply Today to Find Out More If you're driven, confident and ready to take on responsibility, this programme gives you everything you need to build a successful career in sales and management.

About the Role RG Setsquare is recruiting on behalf of one of the UK's most established independent building services and facilities management contractors - a business with over a century of heritage, a blue-chip client base, and a proven commitment to investing in the quality of its engineering teams. We are looking for an experienced Mechanical Fitter with a strong background in pipefitting and mechanical installations to join their mobile project delivery team on a permanent basis. Working across a varied portfolio of commercial sites - including corporate offices, public sector buildings, healthcare facilities, and high-profile private sector premises - you will be central to the installation and commissioning of mechanical systems as part of new works, refurbishments, and upgrade projects. This is a solid, well-rounded package: up to 38,000 base salary, company vehicle, and genuine overtime opportunities on top. What You'll Be Doing As a Mechanical Fitter, your day-to-day responsibilities will include: Installation of commercial pipework systems including LPHW, CHW, domestic hot and cold water, and steam - across new build, refurbishment, and upgrade projects Fabricating, cutting, threading, and joining pipework using a range of methods including press-fit, compression, welded, and soldered jointing Installing mechanical plant and equipment including pumps, pressurisation units, heat exchangers, fan coil units, AHUs, and associated valves and fittings First and second fix mechanical installation works on commercial projects, working to drawings, specifications, and installation programmes Commissioning and testing of newly installed mechanical systems, ensuring performance meets design intent and client specifications Working closely with project managers, other trades, and site teams to ensure installations are delivered on programme and to the required standard Identifying and reporting any site issues, design queries, or variations that may affect the installation Completing installation records, test sheets, and handover documentation accurately Working safely at all times in full compliance with current health & safety legislation, RAMS, and company procedures What We're Looking For Essential: Recognised mechanical trade qualification - NVQ Level 2 or 3 in Mechanical Engineering, Plumbing, or Pipefitting (or equivalent time-served apprenticeship) Proven experience in commercial mechanical installations and pipefitting within a building services, M&E contracting, or FM environment Practical ability across a range of pipework jointing methods - including press-fit, compression, solder, and threaded connections Experience installing mechanical plant including pumps, FCUs, AHUs, heat exchangers, and associated pipework and valves Ability to read and work from mechanical installation drawings and specifications Comfortable working across multiple live commercial sites and coordinating with other trades Full UK Driving Licence Professional approach and strong communication skills when working on client sites Desirable (not essential): Experience with welded pipework (MIG, TIG, or oxy-acetylene) CSCS card IPAF / PASMA (working at height) Any additional mechanical or plumbing qualifications About Our Client Our client is one of the UK's leading independent building services companies, with specialist capabilities spanning mechanical and electrical engineering, facilities management, energy services, and water treatment. With over 100 years of trading history and long-standing relationships across the public and private sectors, this is a stable, well-respected, and genuinely established employer in the FM market. The business is committed to the development of its people - offering structured induction, an internal training Academy, funded qualifications, and real opportunities for career progression. Full details will be provided to shortlisted candidates. The Package Up to 38,000 per annum depending on experience and qualifications Company vehicle provided Fuel card Overtime available - a genuine opportunity to increase your earnings Company pension scheme Learning and development through the client's internal training Academy Funded qualifications and structured career development Long-term, stable employment with one of the UK's most established FM and building services contractors How to Apply This vacancy is being managed by RG Setsquare. To be considered, please submit your CV via CV-Library. Shortlisted candidates will be contacted directly by our team with full information on the client, the area covered, and next steps. RG Setsquare specialises in technical and FM recruitment across the UK, placing skilled trades and engineering professionals with leading contractors and service providers at every level. RG Setsquare is acting as an Employment Agency in relation to this vacancy.

About Haztec Founded in 2001 Haztec International Ltd is a designer and manufacturer of warning systems for special purpose vehicles including those for emergency service applications. Operating from extensive research, design, test and manufacturing facilities in Yeadon, Leeds, UK, we have established ourselves as trusted partner to Police, Fire, Ambulance, rescue, recovery and utility fleet managers on every continent. Haztec is a business-to-business supplier. We work with fleet end users, conversion houses, base vehicle OEMs and distributors. We specialise in creating customised products to suit specific customer needs, Haztec products are typically technical in nature and integrated into vehicles by third party installers. The Role Reporting to the Sales and Marketing Director, the successful candidate will be responsible for growing existing accounts and developing substantial new customer relationships and sales. The sales territory for this role is nominally the Midlands, southern England and south Wales. It is likely the successful candidate will live in or close to this general area. You will play a pivotal role in the growth of Haztec s UK business Contact with overseas converters and participation at international exhibitions is required to support the wider business in the course of fulfilling this role. Subsequently, occasional overseas travel with overnight stays will be required in addition to normal domestic travel. Further details as follows: Responsibility for sustaining and growing sales from a defined group of existing accounts and target assignments. Research and identification of potential new customers. Pure new business development: identify new potential customers, cold first contact, develop all-new relationships leading to new sales. Manage and develop the ongoing account. Assess customer enquiries and product requirements, often working with complex vehicle build specifications, and subsequently produce technical quotations. Assist with industry exhibitions, in the UK and overseas. Regular reporting to the business, including data related to development of potential new customers, forthcoming orders, new product requirements and sales pipeline. The role is home-based but with frequent travel as required in the fulfilment of duties and with periodic requirement to be on-site at the Haztec facility in Yeadon. Skills Requirement / Desirables: Experienced Sales Manager able to evidence successful management of business accounts and offer details relating to previous achievements in new business development. Previous experience working with professional vehicle fleets, and particularly those involved in emergency operations, is preferred but not essential. A general understanding of motor vehicles, their electrical systems and awareness of automotive market trends would be beneficial. Excellent communication skills in written and spoken English language. Reasonable computer skills, proficient in the use of Microsoft office products Full UK driving licence essential. Benefits Competitive salary determined based upon experience. Discretionary bonus for meeting annual performance targets. Company car. Enrolment to company pension scheme following successful probation with the company matching employee contribution up to 5%.

I am seeking a commercially driven Business Development Manager to support the growth of activities across the UK power and energy infrastructure sector. The role will focus on identifying and securing new business opportunities across a diverse portfolio including power systems automation (protection, control, SCADA and telecoms), electrical substation design, grid compliance studies, and panel build projects. This is a key role within the business, working closely with technical and commercial teams to develop long-term client relationships and convert opportunities into profitable work. Key Responsibilities: Deliver against agreed sales and growth targets across defined markets and service lines. Identify, develop, and secure new business opportunities within DNOs, ICPs, EPC contractors, and renewable energy developers (including BESS, solar, and wind). Build and maintain strong relationships with key clients, partners, and industry stakeholders. Support the preparation of bids, tenders, PQQs, and proposal submissions in collaboration with engineering and commercial teams. Monitor market activity, frameworks, and procurement portals to identify upcoming opportunities. Maintain a healthy and active sales pipeline aligned with company growth objectives. Prepare and update capability statements, presentations, and supporting bid documentation. Work with senior leadership to support commercial strategy, pricing approaches, and partnership development. Represent the company at industry events, conferences, and networking opportunities. Support marketing and business development initiatives, including digital content and LinkedIn engagement. Provide regular reporting on pipeline activity, wins/losses, forecasts, and market intelligence. Manage and develop relationships with OEM partners as UK channel representatives, including performance reporting and forecasting. Travel within the UK and occasionally internationally for client meetings, site visits, and industry engagement. Be flexible in working hours where required to meet client and project demands. Minimum Requirements: Education: Degree in Electrical Engineering, Business, or a related discipline (preferred). Experience: 5+ years in business development, commercial, or sales roles within the UK/European energy, utilities, or engineering sectors. Proven track record of achieving and exceeding sales targets. Strong understanding of UK energy infrastructure markets, including DNOs, ICPs, and data centre frameworks. Skills & Attributes: Strong client-facing and relationship management skills. Excellent negotiation and presentation abilities. Strong written and verbal communication skills. Commercially aware with the ability to interpret financial and tender documentation. Proficient in MS Office, CRM systems, and LinkedIn for professional networking. Ability to work collaboratively across technical and commercial teams. Experience managing or mentoring team members is desirable. Other Requirements: Must be eligible to work in the UK. Full UK driving licence required. Willingness to travel as required across the UK and occasionally overseas. This is an opportunity to join a growing and ambitious organisation operating at the forefront of UK energy infrastructure, where your contribution will directly shape future growth and success. The salary is 50,000 to 70,000 plus benefits including bonus.

Job Title: Manufacturing Test Engineer Location: Blackbushe Department: Manufacturing/Production Reports To: Production Manager Contract Type: Fixed Term Temporary - 18 months Role Purpose We are seeking a hands-on Manufacturing Test Engineer to perform rigorous electronic testing across a diverse range of products. This role involves bench testing, tank testing, fault diagnosis, and support throughout the production process-from component level, through PCB and chassis assembly, to final unit assembly. The successful candidate will ensure strict adherence to production schedules, quality standards, and safety requirements. Key Responsibilities Conduct defined electrical/electronic and tank testing procedures throughout the production process. Diagnose and resolve faults at the component and assembly level. Perform basic assembly tasks to support testing processes when required. Identify and report specification or design non-conformances, raising appropriate documentation as necessary. Ensure all testing activities comply with quality standards and recommended production timelines. Maintain accurate documentation of test results, calibration certificates, and other production records. Utilize company IT systems (ERP, Intranet, Microsoft Office) to support testing and production activities. Collaborate effectively with other departments (Engineering, Stores, Quality) to resolve test-related issues. Provide ad hoc assistance to the Manufacturing Manager, Cell Coordinators, and other Test Engineers. Essential Competencies Strong adaptability and flexibility. Excellent problem-solving and decision-making skills. High attention to detail and quality focus. Effective communication and teamwork abilities. Drive for results and persistence in resolving complex issues. Ability to interpret technical data, including engineering drawings and circuit diagrams. Desirable Competencies: Coaching and development skills. Proactivity and innovation in testing and troubleshooting. Leadership and motivation capabilities. Qualifications & Experience Essential: HNC in Electronics or equivalent qualification. Hands-on experience in electronic testing. Proven experience in fault finding down to component level. Competent with test equipment (oscilloscopes, DVMs, power supplies, timer counters, etc.). Proficient in Microsoft Office (Outlook, Excel, Word). Desirable: Previous experience in a manufacturing or production environment. Additional Information Travel Required: No Offshore Training Required: No Regular Medical Required: Yes, annual Staff Management: None Budget Responsibility: None Contact Coral at DCS to apply INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: £60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Our client is an innovative, industry-leading manufacturer serving the construction, industrial, and rail sectors. They are seeking a Buyer, with international buying experience to join their growing team and align with their 5-year growth strategy. This role is offering the chance to work with cutting-edge products in a purpose-led business that values integrity, passion, excellence and respect. You will be primarily based in their offices in Fareham ; however, the role will require international travel on occasion Reporting to theProcurement Manager, as buyer you will have daily responsibility for miscellaneous parts ordering and leading supplier relationship management with your designated suppliers. You will support the transition to a demand led procurement model by aligning purchasing decisions with forecasted demand, customer requirements and strategic growth plans This role plays a key part in enabling their market-driven strategy by ensuring procurement decisions support customer demand, product alignment, and scalable supply chain performance Key Responsibilities Source and purchase materials in line with business requirements by raising and managing purchase orders through MRP system, supporting strategic sourcing initiatives aligned with organisational objectives. Monitoring supplier performance in terms of delivery, quality, cost, planning, confirmation and communication. Build and maintain strong supplier relationships by negotiating pricing, payment terms, and lead times, supporting supplier evaluation, onboarding, and development activities, and proactively resolving supply chain issues to minimise disruption. Identify cost-saving opportunities and value-engineering options by supporting budget tracking and cost analysis reporting, contributing to contract negotiation and management activities, and monitoring market trends affecting the supply of metal and electrical components. Ensure ERP system product lines - BOMs - are accurate and up to date, raising new codes, adding new products and amending live BOMs as necessary Receipt goods into the ERP system Support reconciliation of goods-in documentation to supplier invoicing process Raise authorised purchase orders and manage throughout supply chain cycle Lead supplier consolidation projects with the aim of reducing cost to the business Lead BOM rationalisation projects working with all other teams to reduce Inventory portfolio. Ensure Component Pricing information is up to date and accurate against each item in your portfolio Facilitating of inventory checks and stock control processes, ensuring stock accuracy is maintained within agreed targets, and investigate any variances by analysing goods received, usage, and expected stock levels to identify and resolve discrepancies. Generate regular reports and statistics to ensure line manager aware of inventory status Use data and reporting to inform purchasing decisions, identify trends and improve forecast accuracy Maintain high quality procurement data to support business wide planning and reporting Actively collaborate with Sales, R&D and Operations to ensure alignment between demand, product specification and supply capability Identify and mitigate supplier risk, including capacity constraints and single-source dependencies, and support supply continuity planning Support responsible sourcing practices in line with company ESG objectives Support wider procurement and supply chain activities as required Any other task reasonably expected by line manager or other senior leadership team member Requirements Experience of procurement and supplier management processes Knowledge of generic ERP systems and product/BOM maintenance Excellent Excel skills CIPS Level 4 Diploma, or working toward qualification Experience in managing suppliers internationally Proven ability to implement process improvement initiatives Strong decision making and problem-solving skills Excellent communication skills, both written and verbal Have high levels of attention to detail and will remain calm under pressure Commercial awareness with an understanding of how procurement decisions impact cost, service and overall business performance Ability to work cross-functionally and contribute to broader business objectives beyond core purchasing responsibilities Ideally you will have a background in Steel, Manufacturing or electronics Benefits Salary- £30,000- £40,000 Profit related bonus Office Based

Kick-start your career with an exciting and fast-paced graduate development programme from the UK's largest B2B supplier of electrical equipment. Enjoy excellent rewards, hands-on learning and a clear pathway into sales leadership and business management. What's on Offer: 31,000 - 33,000 starting salary Two pay rises in your first year Profit share bonus + up to 1,800 tax-free training bonuses 25 days' holiday + matched employer pension contributions Fast progression into B2B sales and management Industry-leading, accredited training and mentorship Highly sociable company culture with opportunities to network with clients at events such as, golf days, football matches and motorsport About the Company This market-leading group is committed to developing future leaders. Their long-running graduate programme is designed for ambitious, commercially-focused graduates who want to learn how a successful business operates and progress into high-earning sales and management roles. The Role As a Graduate Trainee, you'll learn the business from the ground up, build strong customer relationships and progress into a field sales and business management position. Graduate Training Programme: First 6 Months Develop core knowledge of how the business operates - sales, warehouse, logistics, supply chain, administration, IT software, and marketing. Build a deep understanding of the product range and the electrical wholesale industry. Start building relationships, winning deals and advising customers face-to-face over the trade counter, e.g. electricians, contractors and tradespeople. Begin your formal sales training course, attend Head Office training and network with other Graduate Trainees. Complete workbook assessments and earn training bonuses for your progress. 6-12 Months Move into internal sales/account management, engaging with B2B customers by phone, e.g. construction companies, local government authorities, housing developers and hotels. Learn business development strategies and how to target and win new key accounts. 12 Months and Beyond Progress to a varied B2B field sales management role with higher earning potential. Travel locally in your company car to meet clients, socialise, discuss projects and build strong relationships. Work towards running your own business within the group, gaining experience in staff management, purchasing and profit and loss. Managers enjoy significant autonomy thanks to the company's decentralised structure. You must have: A full UK driving licence The ability to start a full-time role immediately Apply Today to Find Out More If you're driven, confident and ready to take on responsibility, this programme gives you everything you need to build a successful career in sales and management.

Kick-start your career with an exciting and fast-paced graduate development programme from the UK's largest B2B supplier of electrical equipment. Enjoy excellent rewards, hands-on learning and a clear pathway into sales leadership and business management. What's on Offer: 31,000 - 33,000 starting salary Two pay rises in your first year Profit share bonus + up to 1,800 tax-free training bonuses 25 days' holiday + matched employer pension contributions Fast progression into B2B sales and management Industry-leading, accredited training and mentorship Highly sociable company culture with opportunities to network with clients at events such as, golf days, football matches and motorsport About the Company This market-leading group is committed to developing future leaders. Their long-running graduate programme is designed for ambitious, commercially-focused graduates who want to learn how a successful business operates and progress into high-earning sales and management roles. The Role As a Graduate Trainee, you'll learn the business from the ground up, build strong customer relationships and progress into a field sales and business management position. Graduate Training Programme: First 6 Months Develop core knowledge of how the business operates - sales, warehouse, logistics, supply chain, administration, IT software, and marketing. Build a deep understanding of the product range and the electrical wholesale industry. Start building relationships, winning deals and advising customers face-to-face over the trade counter, e.g. electricians, contractors and tradespeople. Begin your formal sales training course, attend Head Office training and network with other Graduate Trainees. Complete workbook assessments and earn training bonuses for your progress. 6-12 Months Move into internal sales/account management, engaging with B2B customers by phone, e.g. construction companies, local government authorities, housing developers and hotels. Learn business development strategies and how to target and win new key accounts. 12 Months and Beyond Progress to a varied B2B field sales management role with higher earning potential. Travel locally in your company car to meet clients, socialise, discuss projects and build strong relationships. Work towards running your own business within the group, gaining experience in staff management, purchasing and profit and loss. Managers enjoy significant autonomy thanks to the company's decentralised structure. You must have: A full UK driving licence The ability to start a full-time role immediately Apply Today to Find Out More If you're driven, confident and ready to take on responsibility, this programme gives you everything you need to build a successful career in sales and management.

Group Facilities Manager - Client side opportunity - hybrid working - leisure sector - £50k salary Role PurposeYou will be joining a leisure company who are looking for a Group Facilities Manager who owns the maintenance and upkeep of all sites across the UK, ensuring every site operates safely and to our high standards.This role owns the performance, condition, and longevity of all physical assets across the group. The successful candidate will ensure every site is safe, fully operational, meticulously maintained, and presented to the high standards expected. Working closely with managers, regional leadership, and external contractors, the Group Facilities Manager will implement robust maintenance systems, control supplier performance, protect asset value, and ensure their sites operate reliably and efficiently at all times.This is a hands-on, senior operational role requiring strong leadership, commercial awareness, and proven experience managing facilities across a multi-site estate. The role is critical in supporting continued national expansion and delivering a consistent, premium customer experience across every location. Key Responsibilities1. Estate Ownership & Maintenance Control Take full responsibility for the condition, safety, and functionality of all sites.Build and manage a group-wide repairs & maintenance reporting system with all managers.Triage, prioritise, and resolve all reactive maintenance issues across the estate.Attend sites regularly and be physically present where problems need fixing.Ensure zero tolerance on long-outstanding issues. 2. Planned Preventative Maintenance (PPM)Design, implement, and continuously improve a group maintenance scheduleBuilding fabricMechanical & electrical systemsPlumbing & drainageHVAC & ventilationCatering and bar equipmentIT, CCTV, access control and WiFiBuild and maintain a central maintenance log for every site.Introduce service intervals, inspection regimes, and reporting templates. 3. Supplier Sourcing & Contract ManagementGo to market to source and appoint approved national and regional contractors, including:ElectricalPlumbingGeneral building & DIYCourt maintenance specialistsHVACFire & securityNegotiate call-out rates, SLAs, warranties, and retainer agreements.Create a preferred supplier framework with clear standards and response times.Manage performance, costs, and quality - remove underperforming suppliers quickly. 4. Asset, Warranty & O&M ManagementBuild and maintain an asset register across the group.Track and manage:Product warrantiesGuaranteesAftercare agreementsInstaller liabilitiesEnsure O&M manuals are created, stored, and kept up to date for every site.Own all handover documentation from new builds and refurbishments.Ensure sites operate assets in line with manufacturer requirements. 5. New Site Handover & Growth SupportLead on the facilities side of new site openings, including:SnaggingDefect managementSupplier aftercareWarranty setupO&M compilation 6. Cross-Functional SupportWork closely with managers to train them on reporting, basic checks, and asset care.Liaise with marketing where physical assets are required on site (signage, price boards, POS, promotional installs).Support operations and regional management with estate performance reporting.Assist with budgeting for maintenance and long-term capex planning. What We're Looking ForWe want someone who:Has 5+ years experience in multi-site facilities management (leisure, gyms, hospitality, retail, logistics, or sports facilities ideal).Is commercial, tough, organised, and decisive.Is used to running contractors, not being run by them.Is highly practical - understands buildings, M&E, and maintenance in the real world.Can build systems, but also roll their sleeves up.Is comfortable travelling, being on site, climbing ladders, and dealing with issues directly.Can implement standards and hold people accountable.Doesn't let problems drift. Core Skills & ExperienceMulti-site maintenance managementContractor sourcing & negotiationPlanned preventative maintenance systemsAsset and warranty managementBuilding services & general construction knowledgeHealth & safety awarenessBudget control and cost trackingStrong organisation and documentation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #

Field Operative Supervisor Location: Havant, Hampshire, PO9 / Mobile Contract: Permanent, Full-Time Reports to: Operations Manager Aura Retrofit is one of the leading energy efficiency and retrofit installers in the South of England. Our mission is to eradicate fuel poverty and reduce carbon emissions from UK homes. We deliver the full range of domestic energy efficiency measures (heat pumps, solar PV, insulation, boilers), with ambitious plans for growth. We are seeking an experienced and driven Field Supervisor to lead and oversee field-based installation teams across multiple domestic sites. This role is critical in ensuring that all works are delivered safely, compliantly, and to the highest technical and customer service standards. The successful candidate will bring strong leadership, technical expertise in domestic heating systems, and a passion for quality, safety, and continuous improvement. KEY RESPONSIBILITIES • Supervise & manage multiple field-based teams across various domestic sites including heating/electrical/multi-trade • Conduct site inspections and quality audits • Monitor vehicle condition and van stock across the field • Provide on-the-job coaching, training, and development to engineers and installers • Ensure works are completed efficiently and to required standards, with minimal disruption to customers • Maintain high levels of customer satisfaction through professional site management • Manage any complaints to reach a positive outcome with customers • Promote a strong safety culture across field teams, and ensure compliance with all SHEQ, Safety, Health, Environmental & Quality) policies and procedures KEY SKILLS AND EXPERIENCE REQUIRED • Proven experience supervising a field-based team across multiple sites • Strong leadership and people management skills, including evidence of training, mentoring & development • Strong abilities to multi-task, organise and prioritise • Strong problem-solving and decision-making skills • Excellent communication skills with both colleagues and customers • Strong understanding of coordination between technical and operational teams • Excellent attention to detail and documentation standards • Proven experience in the installation and maintenance of domestic heating systems • Ability to work independently as well as part of a wider team Mandatory Qualifications and Certifications • ACS in a minimum CCN1/CKR1/HTR1/CENWAT1 • Full UK Driving Licence ADDITIONAL DESIRED EXPERIENCE/SKILLS • Apprenticeship NVQ / City & Guilds • G3 unvented hot water qualifications/ Water Regs • BPEC or equivalent in Heat Pump Design/ Installation • OFTEC qualifications • Manufacturers training courses • Electrical installation and design knowledge, for example 17th/18th edition BENEFITS Aura Retrofit is committed to regular training and improvement within our team via our in-house sponsorship programme, allowing team members to add additional trade qualifications to their existing skills. This has included gas engineers to electricians, heat pump installers to qualified gas engineers and electricians to Solar PV specialists. Part of our growth plan is reliant on finding people with an ambition to push their existing skills base. We also offer: • Competitive salary • Additional skills allowances payments based on additional qualifications • 25 days annual leave, plus bank holidays • Holiday buy back scheme up to 5 of your days • Company pension scheme • A collaborative and dynamic work environment • Opportunity to work in a business focused on innovation and sustainability • Long-term career progression within a rapidly growing organisation.

Excellent opportunity for a Technical Business Development Manager to join a leading specialist in advanced motion control solutions supporting a number of key market sectors. Their product portfolio includes motors, drives, actuators, gearboxes, integrated systems and associated instrumentation. This is a hybrid technical sales and business development role focused on new business generation, strategic account growth and delivering engineered solutions into OEM and test markets across the UK. Key responsibilities for the Technical Business Development Manager role covering the UK: Identify, prospect and win new business opportunities across OEM and test markets Develop and grow pipeline activity to meet and exceed sales and margin targets Deliver technical sales solutions across motors, drives, actuators, gearboxes and motion systems Work closely with Applications Engineers to deliver strategic and technically complex projects Support customers in product design and development with a strong technical bias Manage and expand existing accounts through structured account management Identify and promote cross-selling opportunities across the wider group Maintain accurate CRM records of all sales activities, visits and pipeline progression Liaise with suppliers and group businesses on new projects and product opportunities Negotiate NDAs and contracts where applicable Ensure compliance with company Health & Safety and Quality/ISO standards Key skills required for the Technical Business Development Manager role covering the UK: Proven experience in technical sales or business development Strong background in motors, drives and gearboxes (motion control experience essential) Demonstrated success in new business development and pipeline growth Experience selling into OEM environments Technical qualification in Mechanical or Electrical Engineering (HNC/HND or higher preferred) Confident using CRM systems to manage sales activity Strong IT skills including Excel, Word and PowerPoint Excellent written and verbal communication skills Able to work autonomously while contributing to a collaborative sales team This is a newly created position for a technical business development manager, aligning a specialist motion control product portfolio with strategic growth plans. It offers the opportunity to play a key role in shaping market development while working closely with engineering and technical teams to deliver high-value solutions. APPLY NOW! To apply for the Technical Business Development Manager role covering the whole of the UK, please send your CV to (url removed), or for more information contact Mike Belmar on (phone number removed).

Locations: Warrington, Newcastle and Cumbria About the Opportunity: Amentum are part of a 10-year control systems framework for designing, manufacturing, and installing control systems to aid decommissioning and operational efficiency, the project comprises of more than 200 nuclear facilities and more than 1,000 buildings in Cumbria. We are a Key supplier and are looking for people to join our team. You will be working on a multi-million-pound contract to manage system design, Programme, Test and assembly. The framework supports the site's high-hazard risk reduction programme. We have existing Teams out of Birchwood Park, Warrington, Cumbria and Newcastle North East, where we can manage hybrid working, with occasional site visits. Role Description To design, develop, implement and test PLC-based control systems, producing high-quality and comprehensive engineering design documentation such as: Requirements capture and traceability documentation (URS/RTM), System / Functional Design Specifications (SDD/FDS), Detailed Software System Specifications (SSS) Test Specifications (Module/Integration/System/Hardware), Operation & Maintenance Manuals (O&M), System Rebuild Documentation I/O, Alarm & Message Schedules, Support with project Life Time Records / Material Traceability Records In addition to the above, the role shall support the Lead Engineer and Project Manager in maintaining the planned delivery schedule, reporting technical issues, changes in scope and variations to the programmed activities where necessary. Programming PLC equipment (such as Rockwell/Schneider/Siemens)using IEC 61131 languages, producing module functions blocks and logic in accordance with the design documentation and engineering standards. Work closely with HMI/SCADA and database engineers to develop the control system architecture, producing Network Architecture Diagrams and interfacing documentation to suit, to support the visualisation of plant via an integrated Cyber Secure SCADA system. Undertake in-house acceptance testing in a formal, controlled manner of the integrated control system, ensuring change control management is maintained and recorded. Site acceptance testing (commissioning) may also be required. Support the generation of installation and commissioning documentation, operator and maintainer training and technical site support post-delivery. People are our greatest asset, and we offer a competitive package to retain and attract the best talent. In addition to the benefits you would expect, UK employees also receive free single medical cover and digital GP service, family-friendly benefits such as enhanced parental leave pay and free membership of employee assistance and parental programmes, plus reimbursement towards relevant professional development and memberships. We also give back to our communities through our programmes which incorporate matched-funding, paid volunteering time and charitable donations. Here s What You ll Need: Significant experience in the design and implementation of PLC control systems. Excellent understanding of PLC programming languages (IEC61131), PLC hardware and software, and communication protocols used in industrial (OT) control systems. Significant demonstrable experience in EC&I industry (preferably Nuclear) with PLCs. Meticulous attention to detail to ensure accuracy and reliability in PLC programming and system design. Experience in producing control system functional specifications, detailed design documents and formal Test Specifications to a high-quality level. Experience in undertaking formal and controlled testing and validation activities. Excellent fault-finding and troubleshooting skills with the ability to analyse complex systems, identify problems, and implement effective solutions. Good understanding of design drawings such as Electrical Enclosures, Control System Panels, Motor Control Centres, etc. Have a technical understanding of engineering design drawings, mainly in relation to PLC control system cubicles, enclosures, and interface panels, to assist in ascertaining constraints and design impacts from site visits, working in collaboration with the engineering teams and stakeholders to produce designs and PLC software to a high-quality level. A Bachelor's Degree in Engineering or related field, or demonstrable evidence of experience with a high emphasis on EC&I engineering using PLCs. Be able/willing to obtain a UK Security Clearance Our Culture: Our values stand on a foundation of safety, integrity, inclusion, and diversity. We put people at the heart of our business, and we genuinely believe that we all succeed by supporting one another through our culture of caring. We value positive mental health and a sense of belonging for all employees. We aim to embed inclusion and diversity in everything we do. We know that if we are inclusive, we are more connected, and if we are diverse, we re more creative. We accept people for who they are, regardless of age, disability, gender identity, gender expression, marital status, mental health, race, faith or belief, sexual orientation, socioeconomic background, and whether you re pregnant or on family leave. This is reflected in our wide range of Global Employee Networks centred on inclusion and diversity.

About the role We re looking for an experienced Maintenance Manager to lead the maintenance function at our large-scale AO Recycling plant in Telford, a 24/7 operational site processing fridges and other Large Domestic Appliances (LDA). This is a role with full responsibility for the safe, reliable, and efficient operation of all plant and equipment across the site. You will lead maintenance delivery across a complex, highly automated recycling facility, managing supervisors and multi-skilled technicians and driving a strong planned maintenance culture. The Site & Operation AO is one of the UK s largest recyclers of fridges and Large Domestic Appliances (LDA). The recycling facility operates 24/7 and includes: • PLC-controlled fridge recycling plant and gas recovery systems • Material handling equipment, conveyors, screens, magnetic separators, air separators, compactors and balers. • Forklift trucks, dock bays, and site infrastructure Here's What You Can Expect To Be Doing • Lead, manage, and develop maintenance supervisors and mechanical/electrical technicians. • Ensure effective shift coverage and skills availability across a 24/7 operation. • Set, measure and report clear standards of maintenance performance and safety. • Own all planned, preventive, and reactive maintenance activities. • Ensure high PPM compliance leading to reduced unplanned downtime. • Lead root cause analysis and reliability improvements. • Own and control the CMMS, including asset data, work orders, and reporting • Drive consistent CMMS use across all shifts. • Champion safe systems of work including LOTOTO and permit-to-work. • Control contractor activities and support audits and compliance A Few Things About You • Minimum 5 years experience in a maintenance leadership role within an industrial or process environment. • Experience managing maintenance in a 24/7 operation. • Proven leadership of multi-disciplinary mechanical and electrical teams. • Strong working knowledge of PLC-controlled and automated plants. • Demonstrable CMMS ownership and PPM management. • Strong health, safety, and contractor management background. Qualifications • NVQ Level 3 / Apprenticeship or equivalent in Mechanical or Electrical Engineering. • Technical certificate in a relevant discipline. (City & Guilds, B-Tech, HNC or equivalent) Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back you ll be rewarded inside and outside of work. • Holidays; 25 days holiday • Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. • Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! • Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP s, Mental Health support and much more. • Discounts; exclusive discounts across our product range. • Family leave; Enhanced Maternity, Paternity and Adoption leave. • Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. • Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts!

Design Manager - Renewable Energy South East England 60,000- 70,000 Full-Time Permanent We are currently partnering with a rapidly growing renewable energy and building services specialist to recruit an experienced Design Manager to lead and develop their technical design function. This is an excellent opportunity for a senior-level design professional to join a business delivering high-quality renewable and M&E projects across residential and commercial sectors, with strong long-term progression opportunities as the company continues to expand. The Company Our client is a well-established provider of renewable energy and mechanical/electrical building services solutions , delivering technically advanced projects across the South East. Working alongside developers, architects, and consultants, they specialise in the design and delivery of systems including heat pumps, solar PV, MVHR, and integrated M&E solutions for both residential and commercial applications. With a strong project pipeline and ambitious growth plans, they are investing heavily in both their technical capability and leadership team. The Role As Design Manager, you will take ownership of the company's design department, managing a small team of engineers while remaining hands-on with complex technical design work. You will oversee projects from post-sale handover through to detailed technical delivery, ensuring designs are practical, coordinated, and installation-ready. The Candidate We are looking for a technically strong and commercially aware individual with experience leading renewable or building services design projects. Essential: Proven experience designing renewable energy systems , particularly heat pumps Strong background in building services or M&E design Experience managing or mentoring technical teams Excellent understanding of BIM workflows and RIBA stages Strong client-facing and stakeholder management skills Ability to work within fast-paced project environments Excellent attention to detail and problem-solving skills Software Experience: AutoCAD Revit IES EasyPV (or similar) Desirable: Experience on high-spec residential or commercial developments Experience presenting technical designs to clients or consultants Portfolio/examples of previous renewable system designs The Package 50,000- 55,000 basic salary Realistic OTE of 60,000- 70,000 Pension scheme Car allowance / company vehicle options On-site parking On-site gym Ongoing professional development Strong long-term progression opportunities within a growing business Career Progression This role offers genuine scope for progression within a business experiencing significant growth in the renewable energy sector. As the company expands, there will be opportunities to progress into: Head of Design Technical Director Operations or Engineering Leadership roles This is an opportunity to join a company where you can play a major role in shaping both the technical department and the future direction of the business. Why Apply? This is a standout opportunity for a technically driven Design Manager looking to work on innovative renewable energy projects while joining a business with ambitious growth plans and a strong reputation for quality delivery. WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.

Building Management Systems c. £100,000 pa + executive car + bonus + benefits M3 / M25 Corridor The Role Leading designer and manufacturer of Building Management Systems supplying End Users, FM Providers and System Integrators, seeking a high calibre General Manager to lead them in pursuit of greater market share and profitability. A role offering extraordinary scope and potential, reporting to the Group CEO, leading an ambitious and high calibre senior executive team. Key tasks: developing and implementing a business strategy that puts the customer at the forefront of everything they do, developing and introducing new products, expanding customer base, increasing customer service levels, growing market share and profitability. The Person An experienced, customer focused General Manager from within the electrical / electronic products industry. Will have personal relationships with key national end-users, FM service providers and system integrators Will have demonstrable experience of developing successful new products and delivering industry leading levels of customer service. An excellent communicator and enthusiastic crusader for change, with the ability to influence and persuade at all levels. A track record of creating lean and customer focused operations. Personal credibility, vision and drive. The Company Well established, profitable and entrepreneurial market leader in the design, manufacture and supply of innovative branded Building Management products and systems for a prestigious portfolio of national end-users, FM service providers and system integrators. Keen to build upon considerable investment in new products and capitalise on significant new market opportunities, they are looking to appoint an inspirational General Manager to lead them through a period of tremendous growth and opportunity. How to Apply So, if you are looking for a fresh and stimulating opportunity, to join and grow an agile, entrepreneurial thought leader, that will fully utilise your considerable skills, industry knowledge and experience then look no further. Please submit a copy of your CV quoting reference 10372.