Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
May 14, 2026
Full time
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
Are you a Sales or Business Development Engineer passionate about clean energy, electrification, and sustainable maritime solutions? We have an exciting opportunity if you have experience of developing strategic partnerships within major ports in the UK or Northern Europe. This position offers the opportunity to work at the forefront of global electrification and decarbonisation, delivering technically advanced solutions that have a tangible impact on the future of energy and infrastructure. This role provides direct influence on how ports across Northern Europe transition toward cleaner, electrified operations. Sales/Business Development Manager Ports & Shore Power £60k Basic + Excellent Bonus, Car Allowance & Healthcare Opportunity to work with a global industry leader Work from home. Ref: 25309 Proven experience in business development, sales, or solutions engineering within electrical power systems, industrial drives, or infrastructure projects, with a strong understanding of medium- and high-voltage electrical systems, power electronics and electrical infrastructure. Experience working with complex, engineered-to-order solutions and the ability to operate credibly with both engineering teams and senior customer stakeholders. Sales Manager / BDM - The Role: Drive business growth across the UK, Ireland, and Northern Europe within the ports and maritime infrastructure sector, with a focus on electrification and shore power solutions Develop and execute a regional business development strategy aligned with wider systems growth objectives. Identify, develop and convert opportunities in port electrification, shore power (LV/MV/HV), and supporting electrical infrastructure. Build and manage a strong sales pipeline using CRM tools and internal processes Act as the key technical-commercial interface with customers, supporting the development of compliant and competitive electrical system solutions. Support preparation of proposals, system designs and commercial offers, and participate in technical and contractual discussions Build and maintain relationships with port authorities, terminal operators, EPC contractors, utilities, and engineering consultants. Represent the business at industry events across the maritime and electrification sectors Collaborate internally with engineering, proposals, project management, and service teams to ensure smooth project handover and delivery. Regular travel across the UK, Ireland, and Northern Europe, with occasional international travel is required. Sales / BDM - The Person: Degree (or equivalent) in Electrical or Power Engineering, or a related discipline Strong experience in business development, technical sales, or solutions engineering within electrical power systems or industrial infrastructure Solid understanding of medium- and high-voltage systems, power electronics, and electrical distribution infrastructure Experience working with complex, engineered-to-order solutions Commercially astute with strong negotiation skills and a consultative approach to sales Able to engage confidently with both technical engineering teams and senior customer stakeholders Strategic thinker with the ability to execute and deliver results in a regional role Strong communication, presentation, and stakeholder management skills Self-motivated and able to work independently across a geographically dispersed region Ideal candidates will have direct experience in shore power (cold ironing) or port electrification projects, alongside a strong understanding of ports, terminals or heavy industrial environments. Familiarity with electrical standards and grid compliance across UK, Ireland and Northern Europe would be ideal as would an appreciation of decarbonisation drivers, funding mechanisms and regulatory pressures shaping the maritime sector. For further information and a confidential discussion, please contact Sharon Hill. AE1
May 14, 2026
Full time
Are you a Sales or Business Development Engineer passionate about clean energy, electrification, and sustainable maritime solutions? We have an exciting opportunity if you have experience of developing strategic partnerships within major ports in the UK or Northern Europe. This position offers the opportunity to work at the forefront of global electrification and decarbonisation, delivering technically advanced solutions that have a tangible impact on the future of energy and infrastructure. This role provides direct influence on how ports across Northern Europe transition toward cleaner, electrified operations. Sales/Business Development Manager Ports & Shore Power £60k Basic + Excellent Bonus, Car Allowance & Healthcare Opportunity to work with a global industry leader Work from home. Ref: 25309 Proven experience in business development, sales, or solutions engineering within electrical power systems, industrial drives, or infrastructure projects, with a strong understanding of medium- and high-voltage electrical systems, power electronics and electrical infrastructure. Experience working with complex, engineered-to-order solutions and the ability to operate credibly with both engineering teams and senior customer stakeholders. Sales Manager / BDM - The Role: Drive business growth across the UK, Ireland, and Northern Europe within the ports and maritime infrastructure sector, with a focus on electrification and shore power solutions Develop and execute a regional business development strategy aligned with wider systems growth objectives. Identify, develop and convert opportunities in port electrification, shore power (LV/MV/HV), and supporting electrical infrastructure. Build and manage a strong sales pipeline using CRM tools and internal processes Act as the key technical-commercial interface with customers, supporting the development of compliant and competitive electrical system solutions. Support preparation of proposals, system designs and commercial offers, and participate in technical and contractual discussions Build and maintain relationships with port authorities, terminal operators, EPC contractors, utilities, and engineering consultants. Represent the business at industry events across the maritime and electrification sectors Collaborate internally with engineering, proposals, project management, and service teams to ensure smooth project handover and delivery. Regular travel across the UK, Ireland, and Northern Europe, with occasional international travel is required. Sales / BDM - The Person: Degree (or equivalent) in Electrical or Power Engineering, or a related discipline Strong experience in business development, technical sales, or solutions engineering within electrical power systems or industrial infrastructure Solid understanding of medium- and high-voltage systems, power electronics, and electrical distribution infrastructure Experience working with complex, engineered-to-order solutions Commercially astute with strong negotiation skills and a consultative approach to sales Able to engage confidently with both technical engineering teams and senior customer stakeholders Strategic thinker with the ability to execute and deliver results in a regional role Strong communication, presentation, and stakeholder management skills Self-motivated and able to work independently across a geographically dispersed region Ideal candidates will have direct experience in shore power (cold ironing) or port electrification projects, alongside a strong understanding of ports, terminals or heavy industrial environments. Familiarity with electrical standards and grid compliance across UK, Ireland and Northern Europe would be ideal as would an appreciation of decarbonisation drivers, funding mechanisms and regulatory pressures shaping the maritime sector. For further information and a confidential discussion, please contact Sharon Hill. AE1
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
May 14, 2026
Full time
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
May 14, 2026
Full time
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Working for a global leader in Luton, this contract role requires a competent Manufacturing Test Engineer for an immediate start. As a knowledgeable Manufacturing Test Engineer in the electronics field you will undertake the following duties for this contract: Develop and maintain test systems using National Instruments (NI) hardware and LabVIEW software / Test Stand in a production environment. Design, implement and liaise with equipment suppliers for automated test equipment (ATE) and test fixtures to support the manufacturing process of both low and high volume. A very strong understanding of analogue and digital electronic circuits. Collaborate with cross-functional teams, including design engineers, production engineers, and quality assurance personnel, to identify test requirements and develop appropriate test strategies. Analyse test data to identify trends and areas for improvement in the manufacturing process and provide recommendations to optimise product quality and safety. Create and maintain detailed documentation, including test plans, procedures, and reports, in accordance with company and regulatory standards. Provide technical support to production staff in resolving testing issues and ensuring the smooth operation of test equipment. Experience of extracting, exporting and analysing test data, specifically with SQL and MySQL. Reverse engineer existing equipment to understand their functionality, identify areas for improvement and to optimise test process. Create detailed specifications for new equipment, prepare Capital Expenditure applications and liaise with respected suppliers. A 'hands-on' approach will be required at times for shopfloor support. The following background knowledge is required for this manufacturing test engineer: Bachelor's degree in Electrical or Electronic Engineering, Computer Engineering, or a related field id preferred. Minimum of 5 - 8 years of experience in a manufacturing test engineering role, preferably in the field of intrinsically safe products or other electronic devices. Strong proficiency in LabVIEW software, TestStand and NI products, including hardware platforms such as PXI, cRIO, and cDAQ. Experience in designing and implementing ATE and test fixtures for manufacturing environments. Knowledge of industry standards and regulations related to intrinsically safe products and hazardous area certifications (e.g., ATEX, IECEx). Excellent problem-solving skills and the ability to work effectively in a team environment. Strong written and verbal communication skills, with the ability to effectively document and present technical information. Hours of work are Monday to Friday 8.30am - 17.00pm, salary is 25.18 per hour. Apply today! Aimee McGrath Response Personnel
May 14, 2026
Contractor
Working for a global leader in Luton, this contract role requires a competent Manufacturing Test Engineer for an immediate start. As a knowledgeable Manufacturing Test Engineer in the electronics field you will undertake the following duties for this contract: Develop and maintain test systems using National Instruments (NI) hardware and LabVIEW software / Test Stand in a production environment. Design, implement and liaise with equipment suppliers for automated test equipment (ATE) and test fixtures to support the manufacturing process of both low and high volume. A very strong understanding of analogue and digital electronic circuits. Collaborate with cross-functional teams, including design engineers, production engineers, and quality assurance personnel, to identify test requirements and develop appropriate test strategies. Analyse test data to identify trends and areas for improvement in the manufacturing process and provide recommendations to optimise product quality and safety. Create and maintain detailed documentation, including test plans, procedures, and reports, in accordance with company and regulatory standards. Provide technical support to production staff in resolving testing issues and ensuring the smooth operation of test equipment. Experience of extracting, exporting and analysing test data, specifically with SQL and MySQL. Reverse engineer existing equipment to understand their functionality, identify areas for improvement and to optimise test process. Create detailed specifications for new equipment, prepare Capital Expenditure applications and liaise with respected suppliers. A 'hands-on' approach will be required at times for shopfloor support. The following background knowledge is required for this manufacturing test engineer: Bachelor's degree in Electrical or Electronic Engineering, Computer Engineering, or a related field id preferred. Minimum of 5 - 8 years of experience in a manufacturing test engineering role, preferably in the field of intrinsically safe products or other electronic devices. Strong proficiency in LabVIEW software, TestStand and NI products, including hardware platforms such as PXI, cRIO, and cDAQ. Experience in designing and implementing ATE and test fixtures for manufacturing environments. Knowledge of industry standards and regulations related to intrinsically safe products and hazardous area certifications (e.g., ATEX, IECEx). Excellent problem-solving skills and the ability to work effectively in a team environment. Strong written and verbal communication skills, with the ability to effectively document and present technical information. Hours of work are Monday to Friday 8.30am - 17.00pm, salary is 25.18 per hour. Apply today! Aimee McGrath Response Personnel
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: We are seeking an experienced and motivated Production Planner to join our growing team. You will play a crucial role in ensuring the smooth and efficient production of our high-tech products. As a Production Planner, you will be supporting development and implementation of production plans, coordinating materials and resources, ensuring the timely delivery of products. As a production planner, you will collaborate with various teams including production, procurement, logistics and engineering to optimize efficiency an achieve production goals. Responsibilities: Supporting daily tasks within the planning team. Collaborate with operational teams to develop and maintain production schedules and plans. Supporting the maintenance, and daily co-ordination of shop orders reserved and released from planning to production and stores. Support NCR requests and re-work tickets for the shop floor. Control demand for materials and components based on production requirements. Coordinate with cross-functional teams to ensure timely availability of materials and shop orders for production. Effectively communicate production plans, updates, and challenges to relevant parties. Inventory Support: Monitor optimized inventory levels to meet production requirements to help minimize holding costs. Conduct regular inventory analysis to identify slow-moving or obsolete stock. Coordinate with the stores team to ensure accurate stock counts and resolve any discrepancies. Continuous Improvement: Maintain a controlled release principle for shop orders, aligned to production capacity. Identify opportunities for process improvements, demand and cost savings in the procurement and planning functions. Support projects/initiatives towards implementing continuous improvement activities behind the production plan. Qualifications and Requirements: Proven experience and understanding as a production planner in a manufacturing environment, preferably in electrical assembly. Good analytical, problem-solving, and data reporting skills. Excellent communicator and ability to work collaboratively in a cross-functional team environment. Experience in using ERP (Enterprise Resource Planning) and MRP (Material Requirements Planning) systems. Detail-oriented with strong organizational skills to manage multiple tasks and priorities effectively. Good understanding on Microsoft office applications (Word, PowerPoint and Excel) Personal Attributes Proactive, hands-on, and solutions-focused person within a growing business. Strong communicator who thrives in changing production environment. Analytical thinker with attention to detail. Reliable, committed, and able to work autonomously. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
May 14, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: We are seeking an experienced and motivated Production Planner to join our growing team. You will play a crucial role in ensuring the smooth and efficient production of our high-tech products. As a Production Planner, you will be supporting development and implementation of production plans, coordinating materials and resources, ensuring the timely delivery of products. As a production planner, you will collaborate with various teams including production, procurement, logistics and engineering to optimize efficiency an achieve production goals. Responsibilities: Supporting daily tasks within the planning team. Collaborate with operational teams to develop and maintain production schedules and plans. Supporting the maintenance, and daily co-ordination of shop orders reserved and released from planning to production and stores. Support NCR requests and re-work tickets for the shop floor. Control demand for materials and components based on production requirements. Coordinate with cross-functional teams to ensure timely availability of materials and shop orders for production. Effectively communicate production plans, updates, and challenges to relevant parties. Inventory Support: Monitor optimized inventory levels to meet production requirements to help minimize holding costs. Conduct regular inventory analysis to identify slow-moving or obsolete stock. Coordinate with the stores team to ensure accurate stock counts and resolve any discrepancies. Continuous Improvement: Maintain a controlled release principle for shop orders, aligned to production capacity. Identify opportunities for process improvements, demand and cost savings in the procurement and planning functions. Support projects/initiatives towards implementing continuous improvement activities behind the production plan. Qualifications and Requirements: Proven experience and understanding as a production planner in a manufacturing environment, preferably in electrical assembly. Good analytical, problem-solving, and data reporting skills. Excellent communicator and ability to work collaboratively in a cross-functional team environment. Experience in using ERP (Enterprise Resource Planning) and MRP (Material Requirements Planning) systems. Detail-oriented with strong organizational skills to manage multiple tasks and priorities effectively. Good understanding on Microsoft office applications (Word, PowerPoint and Excel) Personal Attributes Proactive, hands-on, and solutions-focused person within a growing business. Strong communicator who thrives in changing production environment. Analytical thinker with attention to detail. Reliable, committed, and able to work autonomously. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Job Description Summary Job Description The Lead Systems Engineer (Electrical Test) will work with the Test Manager to deliver and improve the capability and capacity of the test facilities for HVDC manufacturing. They will be responsible for the safety of test cells, training of test technicians and junior colleagues and facility bring up. Responsibilities - What you'll do Serve as the technical authority for manufacturing test infrastructure, leading issue resolution and supporting the development of junior colleagues Act as a technical escalation point for day to day running and breakdowns of test equipment Develop and deliver new test infrastructure and tools Manage suppliers and contractors for test facility build, commissioning & maintenance Roll out and maintain processes for test facilities and equipment (change management, scheduled calibration, preventative maintenance, etc.) Lead New Product Introduction (NPI) for test facilities (i.e. requirements capture, timely procurement of machinery, updating test sequences, etc.) Cross functional collaboration to facilitate New Product Development (NPD), issue resolution and continuous improvement Work with engineering teams to define and develop manufacturing test strategies and specifications Work with IT and OT teams to integrate test software systems into business software systems for management and reporting Develop and maintain departmental and test operator/technician training, SOPs, risk analyses and any other documentation Carry out continuous improvement activities for test processes and infrastructure to improve KPIs such as OEE, throughput, FPY Skills & Experience - What you'll bring Essential A process driven mindset backed by a 'can do' attitude and a desire to learn Degree, HNC/HND, or equivalent qualification in an engineering discipline A strong understanding of managing electrical safety in a high voltage environment, including using tools such as risk assessments, FMEA, SSoW, LOTO, etc. Demonstrable experience in structured root cause analyses of complex issues (Fishbone diagrams, 5 Whys, ABA testing, etc.) Significant experience in manufacturing test facility design and implementation Be able to communicate ideas, concepts and results to non-technical stakeholders Understanding of lean principles (Kaizen, 5S, etc.) and tools (DMAIC, FMEA, etc) Demonstrable experience in writing or maintaining test specifications Desirable Experience in automated test equipment implementation (NI LabVIEW & TestStand) Demonstrable knowledge of power electronics, product manufacturing and testing Experience supporting New Product Development (NPD) activities Exposure to lean manufacturing environment Specific Abilities: Able to communicate effectively in English (verbal and written) Proactive and self motivating Highly competent in using electrical test equipment (oscilloscope, DMM, power analyser) Able to deliver work proactively, to schedule and within budget Willingness to travel Additional Information Relocation Assistance Provided: No
May 14, 2026
Full time
Job Description Summary Job Description The Lead Systems Engineer (Electrical Test) will work with the Test Manager to deliver and improve the capability and capacity of the test facilities for HVDC manufacturing. They will be responsible for the safety of test cells, training of test technicians and junior colleagues and facility bring up. Responsibilities - What you'll do Serve as the technical authority for manufacturing test infrastructure, leading issue resolution and supporting the development of junior colleagues Act as a technical escalation point for day to day running and breakdowns of test equipment Develop and deliver new test infrastructure and tools Manage suppliers and contractors for test facility build, commissioning & maintenance Roll out and maintain processes for test facilities and equipment (change management, scheduled calibration, preventative maintenance, etc.) Lead New Product Introduction (NPI) for test facilities (i.e. requirements capture, timely procurement of machinery, updating test sequences, etc.) Cross functional collaboration to facilitate New Product Development (NPD), issue resolution and continuous improvement Work with engineering teams to define and develop manufacturing test strategies and specifications Work with IT and OT teams to integrate test software systems into business software systems for management and reporting Develop and maintain departmental and test operator/technician training, SOPs, risk analyses and any other documentation Carry out continuous improvement activities for test processes and infrastructure to improve KPIs such as OEE, throughput, FPY Skills & Experience - What you'll bring Essential A process driven mindset backed by a 'can do' attitude and a desire to learn Degree, HNC/HND, or equivalent qualification in an engineering discipline A strong understanding of managing electrical safety in a high voltage environment, including using tools such as risk assessments, FMEA, SSoW, LOTO, etc. Demonstrable experience in structured root cause analyses of complex issues (Fishbone diagrams, 5 Whys, ABA testing, etc.) Significant experience in manufacturing test facility design and implementation Be able to communicate ideas, concepts and results to non-technical stakeholders Understanding of lean principles (Kaizen, 5S, etc.) and tools (DMAIC, FMEA, etc) Demonstrable experience in writing or maintaining test specifications Desirable Experience in automated test equipment implementation (NI LabVIEW & TestStand) Demonstrable knowledge of power electronics, product manufacturing and testing Experience supporting New Product Development (NPD) activities Exposure to lean manufacturing environment Specific Abilities: Able to communicate effectively in English (verbal and written) Proactive and self motivating Highly competent in using electrical test equipment (oscilloscope, DMM, power analyser) Able to deliver work proactively, to schedule and within budget Willingness to travel Additional Information Relocation Assistance Provided: No
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
May 14, 2026
Full time
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Product Design Engineer Full-Time, Permanent Walsall, West Midlands Hybrid Working Available Competitive Salary & Benefits Package We are partnering with a leading lighting manufacturer in the West Midlands who are seeking an experienced Senior Product Design Engineer to join their growing engineering team. This is a key hire for the business, reporting directly into the Managing Director, with responsibility for leading engineering projects from initial concept through to full production. The successful candidate will play a pivotal role in both new product development (NPD) and the continuous improvement of existing product ranges, with a strong focus on innovation, sustainability, and manufacturability. This is a hands-on leadership role, combining technical design expertise with engineering ownership and process improvement across the full product lifecycle. Senior Product Design Engineer Job Description Lead end-to-end engineering projects from concept through to production, including modifications to existing product ranges Oversee all stages of the design and development process, ensuring innovation, quality, and sustainability targets are achieved Take ownership of New Product Introduction (NPI) for both standard product development and bespoke lighting solutions Act as technical lead within the engineering function, driving continuous improvement across products and processes Ensure all designs comply with relevant national and international safety and performance standards Deliver hands-on electro-mechanical design work, including 3D CAD modelling and prototype development Produce and maintain technical documentation, including drawings, specifications, and production libraries Manage component specifications for purchased parts and assemblies Provide technical support to both internal stakeholders and external customers Lead Value Analysis / Value Engineering (VAVE) initiatives in line with business objectives Support the Managing Director with technical and engineering-related activities Senior Product Design Engineer Skills & Experience Required Minimum 5+ years' experience in a product design / development engineering role Ideally experienced within the lighting or electrical manufacturing sector Strong proficiency in 3D and 2D CAD software (Autodesk Inventor preferred) Solid understanding of design for manufacture (DFM) principles Knowledge of manufacturing processes including casting, moulding, extrusion, and sheet metal fabrication Hands-on prototyping experience (bench work, soldering, assembly, etc.) Experience with document management systems such as Autodesk Vault (or equivalent) Strong attention to detail with excellent organisational skills Ability to work independently and as part of a cross-functional engineering team Strong communication skills with the ability to engage at all levels of the business What's on Offer Opportunity to lead full product lifecycle development within a growing manufacturing business High level of autonomy and direct influence over engineering and product direction Exposure to innovative lighting product development and bespoke project work Close collaboration with senior leadership, including direct reporting to the Managing Director Long-term career progression within a technically driven environment
May 14, 2026
Full time
Senior Product Design Engineer Full-Time, Permanent Walsall, West Midlands Hybrid Working Available Competitive Salary & Benefits Package We are partnering with a leading lighting manufacturer in the West Midlands who are seeking an experienced Senior Product Design Engineer to join their growing engineering team. This is a key hire for the business, reporting directly into the Managing Director, with responsibility for leading engineering projects from initial concept through to full production. The successful candidate will play a pivotal role in both new product development (NPD) and the continuous improvement of existing product ranges, with a strong focus on innovation, sustainability, and manufacturability. This is a hands-on leadership role, combining technical design expertise with engineering ownership and process improvement across the full product lifecycle. Senior Product Design Engineer Job Description Lead end-to-end engineering projects from concept through to production, including modifications to existing product ranges Oversee all stages of the design and development process, ensuring innovation, quality, and sustainability targets are achieved Take ownership of New Product Introduction (NPI) for both standard product development and bespoke lighting solutions Act as technical lead within the engineering function, driving continuous improvement across products and processes Ensure all designs comply with relevant national and international safety and performance standards Deliver hands-on electro-mechanical design work, including 3D CAD modelling and prototype development Produce and maintain technical documentation, including drawings, specifications, and production libraries Manage component specifications for purchased parts and assemblies Provide technical support to both internal stakeholders and external customers Lead Value Analysis / Value Engineering (VAVE) initiatives in line with business objectives Support the Managing Director with technical and engineering-related activities Senior Product Design Engineer Skills & Experience Required Minimum 5+ years' experience in a product design / development engineering role Ideally experienced within the lighting or electrical manufacturing sector Strong proficiency in 3D and 2D CAD software (Autodesk Inventor preferred) Solid understanding of design for manufacture (DFM) principles Knowledge of manufacturing processes including casting, moulding, extrusion, and sheet metal fabrication Hands-on prototyping experience (bench work, soldering, assembly, etc.) Experience with document management systems such as Autodesk Vault (or equivalent) Strong attention to detail with excellent organisational skills Ability to work independently and as part of a cross-functional engineering team Strong communication skills with the ability to engage at all levels of the business What's on Offer Opportunity to lead full product lifecycle development within a growing manufacturing business High level of autonomy and direct influence over engineering and product direction Exposure to innovative lighting product development and bespoke project work Close collaboration with senior leadership, including direct reporting to the Managing Director Long-term career progression within a technically driven environment
Systems Engineer Embedded and Hardware £60,000 to £70,000 depending on skills and experience + Bonus + Benefits Bedford The Vacancy We are seeking an experienced and Senior Systems Engineer Embedded and Hardware to take ownership of the electronics and software workstream for our IVD medical devices. This is a senior role where you will act as technical design authority, ensuring robust system architecture, supplier governance and regulatory compliance while working at system level rather than as a day to day coder. Based in Bedford and working closely with both in house teams and international third party suppliers, this role offers the opportunity to influence products from early architecture through regulatory approval and post market readiness. Reporting to the Head of Engineering, you will provide technical governance and leadership across hardware, embedded firmware and PC software, ensuring all development activities meet quality, safety and regulatory requirements. You will operate as the system-level technical owner, shaping architecture, design controls and verification strategies, while ensuring supplier outputs are delivered to the highest standards. Key Responsibilities: Third Party Oversight and Governance: Partner with external suppliers to develop electronics, embedded firmware, and software for an IVD medical device, leading supplier governance across design controls, KPIs, risk management, schedules, budgets, quality, and regulatory compliance. Supplier Management and Deliverables: Author and manage supplier agreements (quality agreements, SOWs, acceptance criteria, configuration management) and review / approve all supplier outputs, including designs, code, risk documentation, testing artifacts, traceability, and release records Design Controls and Technical Leadership: Own system and software requirements (including safety, EMI / ESD protection, and usability) and ensure full bidirectional traceability from user needs through design, verification, and validation. Architecture, V&V, and Design Transfer: Lead system architecture decisions across electronics, firmware, and software; define and execute verification and validation strategies (including qualified tools and fixtures); and lead design transfer activities. Regulatory Compliance and QMS: Ensure supplier activities operate under ISO 13485 compliant processes and deliver complete DHF / Technical Documentation regulatory expectations; align development to applicable standards. Risk, Submission and Audit Support: Lead and document risk management (ISO 14971), ensure readiness for UDI, labelling, post market surveillance, and change control, and support regulatory submissions and notified body audits by presenting clear technical rationales and objective evidence. Cross Functional and Stakeholder Integration: Integrate the electronics / software workstream with assay / chemistry, mechanical design, manufacturing / operations, and service, collaborating closely with Quality, Regulatory, Clinical, and Customer Support to ensure end to end readiness. Risk, Performance and Delivery Management: Proactively identify and mitigate risks, manage non conformities and CAPAs with root cause analysis, and track / report KPIs including quality, schedule adherence, test coverage, and audit outcomes. International travel required approximately 4 5 times per year. We re Looking for Someone Who Has: Proven experience in medical devices or IVDs, with hands on exposure to embedded electronics, firmware and software development within a regulated environment. Bachelor s Degree in electrical engineering, software engineering or a related discipline; a Master s Degree would be advantageous. Demonstrable experience overseeing third party design partners, OEMs and ODMs. Strong background in real time embedded systems and instrument control. Solid understanding of design controls, verification and validation. Familiarity with statistical methods for V&V, measurement system analysis and design for reliability. Highly organised with exceptional attention to detail. Clear and confident communicator, both written and verbal. Comfortable working within Microsoft 365; Outlook, Teams, Word, Excel, PowerPoint. Strong sense of ownership and accountability. Able to quickly interpret complex information and identify key technical and programme risks. We Can Offer You: An excellent working environment. Hybrid working three days a week in the office with two days a week working from home. 25 days paid annual leave plus bank holidays. Company pension scheme including competitive employer s contribution. Private Medical Insurance package with additional medical cash plan scheme. Enhanced maternity and paternity pay. Company supported employee Health and Wellbeing programme. Life assurance. Free plentiful car parking and electrical car charging points. Beautiful parkland setting with excellent transportation links to Cambridge, Milton Keynes and London. The Company Swiss Precision Diagnostics GmbH (SPD) is a world leader in the research, design and marketing of advanced consumer diagnostic products. Our SPD research centre is at the cutting edge of innovation and is fully engaged in the development of reliable diagnostic products to empower women on their reproductive journey. We are committed to answering the needs of our existing and future consumers, through a continuous flow of new and innovative products. Interested Click apply and you will be redirected to our careers page to complete your application.
May 14, 2026
Full time
Systems Engineer Embedded and Hardware £60,000 to £70,000 depending on skills and experience + Bonus + Benefits Bedford The Vacancy We are seeking an experienced and Senior Systems Engineer Embedded and Hardware to take ownership of the electronics and software workstream for our IVD medical devices. This is a senior role where you will act as technical design authority, ensuring robust system architecture, supplier governance and regulatory compliance while working at system level rather than as a day to day coder. Based in Bedford and working closely with both in house teams and international third party suppliers, this role offers the opportunity to influence products from early architecture through regulatory approval and post market readiness. Reporting to the Head of Engineering, you will provide technical governance and leadership across hardware, embedded firmware and PC software, ensuring all development activities meet quality, safety and regulatory requirements. You will operate as the system-level technical owner, shaping architecture, design controls and verification strategies, while ensuring supplier outputs are delivered to the highest standards. Key Responsibilities: Third Party Oversight and Governance: Partner with external suppliers to develop electronics, embedded firmware, and software for an IVD medical device, leading supplier governance across design controls, KPIs, risk management, schedules, budgets, quality, and regulatory compliance. Supplier Management and Deliverables: Author and manage supplier agreements (quality agreements, SOWs, acceptance criteria, configuration management) and review / approve all supplier outputs, including designs, code, risk documentation, testing artifacts, traceability, and release records Design Controls and Technical Leadership: Own system and software requirements (including safety, EMI / ESD protection, and usability) and ensure full bidirectional traceability from user needs through design, verification, and validation. Architecture, V&V, and Design Transfer: Lead system architecture decisions across electronics, firmware, and software; define and execute verification and validation strategies (including qualified tools and fixtures); and lead design transfer activities. Regulatory Compliance and QMS: Ensure supplier activities operate under ISO 13485 compliant processes and deliver complete DHF / Technical Documentation regulatory expectations; align development to applicable standards. Risk, Submission and Audit Support: Lead and document risk management (ISO 14971), ensure readiness for UDI, labelling, post market surveillance, and change control, and support regulatory submissions and notified body audits by presenting clear technical rationales and objective evidence. Cross Functional and Stakeholder Integration: Integrate the electronics / software workstream with assay / chemistry, mechanical design, manufacturing / operations, and service, collaborating closely with Quality, Regulatory, Clinical, and Customer Support to ensure end to end readiness. Risk, Performance and Delivery Management: Proactively identify and mitigate risks, manage non conformities and CAPAs with root cause analysis, and track / report KPIs including quality, schedule adherence, test coverage, and audit outcomes. International travel required approximately 4 5 times per year. We re Looking for Someone Who Has: Proven experience in medical devices or IVDs, with hands on exposure to embedded electronics, firmware and software development within a regulated environment. Bachelor s Degree in electrical engineering, software engineering or a related discipline; a Master s Degree would be advantageous. Demonstrable experience overseeing third party design partners, OEMs and ODMs. Strong background in real time embedded systems and instrument control. Solid understanding of design controls, verification and validation. Familiarity with statistical methods for V&V, measurement system analysis and design for reliability. Highly organised with exceptional attention to detail. Clear and confident communicator, both written and verbal. Comfortable working within Microsoft 365; Outlook, Teams, Word, Excel, PowerPoint. Strong sense of ownership and accountability. Able to quickly interpret complex information and identify key technical and programme risks. We Can Offer You: An excellent working environment. Hybrid working three days a week in the office with two days a week working from home. 25 days paid annual leave plus bank holidays. Company pension scheme including competitive employer s contribution. Private Medical Insurance package with additional medical cash plan scheme. Enhanced maternity and paternity pay. Company supported employee Health and Wellbeing programme. Life assurance. Free plentiful car parking and electrical car charging points. Beautiful parkland setting with excellent transportation links to Cambridge, Milton Keynes and London. The Company Swiss Precision Diagnostics GmbH (SPD) is a world leader in the research, design and marketing of advanced consumer diagnostic products. Our SPD research centre is at the cutting edge of innovation and is fully engaged in the development of reliable diagnostic products to empower women on their reproductive journey. We are committed to answering the needs of our existing and future consumers, through a continuous flow of new and innovative products. Interested Click apply and you will be redirected to our careers page to complete your application.
Our client is a highly innovative engineering organisation delivering complex, safety-critical projects within a regulated environmen t. This is an opportunity to work on challenging, multidisciplinary programmes across the full engineering lifecycle. We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Safety Systems Engineer Permanent 40,000 - 50,000 Portsmouth We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Responsibilities Deliver system and functional safety across multiple concurrent, safety-critical engineering projects Develop and maintain Safety Management Plans, safety cases, and assurance documentation Lead hazard identification and risk analysis activities (HAZID, HAZOP, FMEA) and manage hazard logs Ensure safety requirements traceability through design, verification, validation, and evidence generation Collaborate across multidisciplinary teams and support safety reviews, audits, and regulatory engagement Essential Skills and Experience Degree in Systems, Mechanical, Electrical Engineering, or related discipl ine Familiarity with safety standards such as Def Stan, IEC 61508, or MIL-STD frameworks Proven experience in safety engineering within defence or safety-critical environments Experience producing safety cases, hazard analysis, and risk assessments Benefits: Private healthcare Life assurance Professional development Pension contribution
May 14, 2026
Full time
Our client is a highly innovative engineering organisation delivering complex, safety-critical projects within a regulated environmen t. This is an opportunity to work on challenging, multidisciplinary programmes across the full engineering lifecycle. We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Safety Systems Engineer Permanent 40,000 - 50,000 Portsmouth We are seeking an experienced Safety Systems Engineer to deliver functional and system safety across a portfolio of complex engineering projects. This role will play a key part in ensuring robust safety processes, compliance, and assurance throughout the full engineering lifecycle. Responsibilities Deliver system and functional safety across multiple concurrent, safety-critical engineering projects Develop and maintain Safety Management Plans, safety cases, and assurance documentation Lead hazard identification and risk analysis activities (HAZID, HAZOP, FMEA) and manage hazard logs Ensure safety requirements traceability through design, verification, validation, and evidence generation Collaborate across multidisciplinary teams and support safety reviews, audits, and regulatory engagement Essential Skills and Experience Degree in Systems, Mechanical, Electrical Engineering, or related discipl ine Familiarity with safety standards such as Def Stan, IEC 61508, or MIL-STD frameworks Proven experience in safety engineering within defence or safety-critical environments Experience producing safety cases, hazard analysis, and risk assessments Benefits: Private healthcare Life assurance Professional development Pension contribution
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Power Systems Engineer Our client, a leading consultancy in the power distribution sector, is currently seeking a Senior Power Systems Engineer to join their team in Manchester. This permanent role involves executing the electro-mechanical design of substations, leading multidisciplinary teams, and ensuring solutions meet client requirements, legislation, and industry standards. The role spans a wide range of local and international projects for commercial, industrial, and utility clients. Key Responsibilities: Designing power systems up to 132 kV, with preference for experience up to 400 kV Leading the engineering of utility substations, including primary design and protection & control design Developing SCADA systems and creating single-line diagrams and substation layouts Selecting and calculating CT/VTs, and managing auxiliary AC/DC power systems Preparing technical reports and client documentation Assessing broader system contexts and understanding cross-disciplinary impacts Mentoring and developing graduate engineers and consultants Job Requirements: Experience in transmission and distribution engineering Strong knowledge of UK electrical engineering standards and regulations Extensive utility substation engineering experience Excellent written and verbal communication skills Understanding of SCADA system design and development Experience with substation safety and access training Ability to support business development and consulting activities Experience in installation and commissioning activities (desirable) Preferred Skills and Attributes: Professional registration as an Incorporated Engineer (IEng) with the Engineering Council Relevant Health & Safety qualifications (e.g., IOSH, NEBOSH) Good understanding of UK environmental and waste management legislation Strong team collaboration skills and experience in knowledge sharing Benefits: 25 days' annual leave plus bank holidays with an option to purchase additional holiday Up to 12 smart-working days per month (post-probation) Support for Military Reservists with 10 additional paid days Healthcare cover (family members can be added at extra cost) 6% matched pension and life assurance Professional development support to achieve chartership Payment of professional membership fees Cycle-to-work scheme and employee perks, including retail discounts Generous recruitment referral bonus Four half-days of paid leave for STEM Ambassador activities Season ticket loan If you are an experienced Senior Power Systems Engineer looking for a new opportunity to further develop your career, we would love to hear from you. Apply now to join our client's dynamic and talented team in Manchester.
May 14, 2026
Full time
Senior Power Systems Engineer Our client, a leading consultancy in the power distribution sector, is currently seeking a Senior Power Systems Engineer to join their team in Manchester. This permanent role involves executing the electro-mechanical design of substations, leading multidisciplinary teams, and ensuring solutions meet client requirements, legislation, and industry standards. The role spans a wide range of local and international projects for commercial, industrial, and utility clients. Key Responsibilities: Designing power systems up to 132 kV, with preference for experience up to 400 kV Leading the engineering of utility substations, including primary design and protection & control design Developing SCADA systems and creating single-line diagrams and substation layouts Selecting and calculating CT/VTs, and managing auxiliary AC/DC power systems Preparing technical reports and client documentation Assessing broader system contexts and understanding cross-disciplinary impacts Mentoring and developing graduate engineers and consultants Job Requirements: Experience in transmission and distribution engineering Strong knowledge of UK electrical engineering standards and regulations Extensive utility substation engineering experience Excellent written and verbal communication skills Understanding of SCADA system design and development Experience with substation safety and access training Ability to support business development and consulting activities Experience in installation and commissioning activities (desirable) Preferred Skills and Attributes: Professional registration as an Incorporated Engineer (IEng) with the Engineering Council Relevant Health & Safety qualifications (e.g., IOSH, NEBOSH) Good understanding of UK environmental and waste management legislation Strong team collaboration skills and experience in knowledge sharing Benefits: 25 days' annual leave plus bank holidays with an option to purchase additional holiday Up to 12 smart-working days per month (post-probation) Support for Military Reservists with 10 additional paid days Healthcare cover (family members can be added at extra cost) 6% matched pension and life assurance Professional development support to achieve chartership Payment of professional membership fees Cycle-to-work scheme and employee perks, including retail discounts Generous recruitment referral bonus Four half-days of paid leave for STEM Ambassador activities Season ticket loan If you are an experienced Senior Power Systems Engineer looking for a new opportunity to further develop your career, we would love to hear from you. Apply now to join our client's dynamic and talented team in Manchester.
Description Electrical Design Engineer for Site Surveys Electrical design power engineer within sub stations - AC and DC power. They have a significant number of sites to survey - they will take 3 to 4 days a week if needed. 1 Survey a week which can take 2-3 days to complete. Travel and expenses will be covered. Sites in Central UK but do have northern, central and southern points. Own vehicle - have their CDM 2015 (hard hats, safety boots, fluorescent jackets) Laptop/Torch - provided by client Skills Design Electrical engineering Electrical Engineering Employee Value Proposition This is an exciting opportunity to work with industry leaders on cutting-edge projects for a globally recognized end customer. Job Title: Electrical Design Engineer Location: London, UK Rate/Salary: .00 GBP Daily Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
May 14, 2026
Contractor
Description Electrical Design Engineer for Site Surveys Electrical design power engineer within sub stations - AC and DC power. They have a significant number of sites to survey - they will take 3 to 4 days a week if needed. 1 Survey a week which can take 2-3 days to complete. Travel and expenses will be covered. Sites in Central UK but do have northern, central and southern points. Own vehicle - have their CDM 2015 (hard hats, safety boots, fluorescent jackets) Laptop/Torch - provided by client Skills Design Electrical engineering Electrical Engineering Employee Value Proposition This is an exciting opportunity to work with industry leaders on cutting-edge projects for a globally recognized end customer. Job Title: Electrical Design Engineer Location: London, UK Rate/Salary: .00 GBP Daily Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
Technical Sales Engineer Our client, one of the world s leading engineering companies, based in Wymondham are currently seeking a driven and commercially minded Technical Sales Engineer to join our client in an outward-facing, client-focused role. About the Role Primarily a Monday Friday position Field-based role with regular international travel High level of autonomy and responsibility Main Office based in Wymondham Key Knowledge, Skills & Experience: Previous experience in a technical sales or outward-facing sales role Engineering background or hands-on experience as an engineer (essential) Ability to understand and assess technical installations, particularly within marine or yacht environments Strong communication and relationship-building skills Self-motivated with excellent organisational and time management abilities Willingness and ability to travel internationally on a regular basis Previous experience in the yachting or commercial marine markets Familiarity with electrical systems This position combines technical expertise with proactive sales activity , supporting both existing customers and developing new business opportunities across Europe, Turkey, and the rest of the world. The successful candidate will be responsible for selling mission-critical electronic marine products , with a focus on the company brand. Key Responsibilities Manage and grow a portfolio of existing clients, maximising business opportunities and strengthening relationships Identify and develop new business opportunities with prospective customers across the EU, Turkey, and the rest of the world Conduct regular client visits, including overseas travel (approximately 9 days per month) Carry out onboard yacht assessments, advising on equipment placement and suitability based on technical specifications and spatial constraints Perform service reviews with existing customers to ensure satisfaction and identify further opportunities Work closely with the Managing Director on sales strategy and key accounts Independently manage your diary and travel schedule to meet business needs Act as understudy to company GM to learn to design and quote system solutions Develop and maintain relationships with a global network of distributors, installers, OEMs, and yacht owners/captains Identify and develop new business opportunities with both OEM and refit customers Hosting technical trainings to members of the marine industry; boatbuilders and partners. Attending tradeshows including, but not limited to METS, Monaco Yacht Show, Fort Lauderdale, Seaworks, and Workboat Show, Palm Beach, FLIBS, METS, Provide technical training and pre- and post-sales support Accurately log customer and opportunity details in both Salesforce and Simpro Additional Information This role will work alongside an existing counterpart based in Florida, with responsibility for the EU, Turkish, and worldwide markets. For further details, please forward a copy of your CV today Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
May 14, 2026
Full time
Technical Sales Engineer Our client, one of the world s leading engineering companies, based in Wymondham are currently seeking a driven and commercially minded Technical Sales Engineer to join our client in an outward-facing, client-focused role. About the Role Primarily a Monday Friday position Field-based role with regular international travel High level of autonomy and responsibility Main Office based in Wymondham Key Knowledge, Skills & Experience: Previous experience in a technical sales or outward-facing sales role Engineering background or hands-on experience as an engineer (essential) Ability to understand and assess technical installations, particularly within marine or yacht environments Strong communication and relationship-building skills Self-motivated with excellent organisational and time management abilities Willingness and ability to travel internationally on a regular basis Previous experience in the yachting or commercial marine markets Familiarity with electrical systems This position combines technical expertise with proactive sales activity , supporting both existing customers and developing new business opportunities across Europe, Turkey, and the rest of the world. The successful candidate will be responsible for selling mission-critical electronic marine products , with a focus on the company brand. Key Responsibilities Manage and grow a portfolio of existing clients, maximising business opportunities and strengthening relationships Identify and develop new business opportunities with prospective customers across the EU, Turkey, and the rest of the world Conduct regular client visits, including overseas travel (approximately 9 days per month) Carry out onboard yacht assessments, advising on equipment placement and suitability based on technical specifications and spatial constraints Perform service reviews with existing customers to ensure satisfaction and identify further opportunities Work closely with the Managing Director on sales strategy and key accounts Independently manage your diary and travel schedule to meet business needs Act as understudy to company GM to learn to design and quote system solutions Develop and maintain relationships with a global network of distributors, installers, OEMs, and yacht owners/captains Identify and develop new business opportunities with both OEM and refit customers Hosting technical trainings to members of the marine industry; boatbuilders and partners. Attending tradeshows including, but not limited to METS, Monaco Yacht Show, Fort Lauderdale, Seaworks, and Workboat Show, Palm Beach, FLIBS, METS, Provide technical training and pre- and post-sales support Accurately log customer and opportunity details in both Salesforce and Simpro Additional Information This role will work alongside an existing counterpart based in Florida, with responsibility for the EU, Turkish, and worldwide markets. For further details, please forward a copy of your CV today Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
Our telecoms client is looking for EAD Circuit Designers for their client is Glasgow. This role is mainly remote with occasional travel to site or stakeholder workshops in Glasgow. This is a 3-6 months contract initially and the rate is £300-£310 per day outside IR35. We are looking for an experienced EAD Circuit Designer to support telecoms circuit delivery into electricity substation and utility environments. This is not a standard network design role. The person must have strong experience in BT/Openreach EAD/Ethernet access circuit delivery, with the ability to assess site feasibility, interpret survey outputs, understand access constraints, and produce practical design packs for implementation. The role is specifically focused on sites where telecoms delivery may be affected by electromagnetic interference, EMC requirements, Earth Potential Rise, fibre/copper suitability, cabinet specification, cable entry, ventilation, earthing, and substation access constraints. The designer will work with engineering, stakeholders, field engineers, commissioning teams and cabinet suppliers to ensure each circuit design is technically feasible, safe, installable and supportable. Required skills and experience: - Hands-on experience designing BT/Openreach EAD, Ethernet access, leased line or carrier Ethernet circuits - Strong understanding of BT/Openreach delivery life cycle, including survey, order validation, civils, provisioning, wayleaves and site readiness - Experience producing telecoms access design packs, HLDs, LLDs, implementation diagrams or as-built documentation - Ability to interpret site surveys, task sheets, supplier notes and technical constraints - Experience working with fibre access design and circuit routing - Understanding of copper access limitations in electrically sensitive or high-voltage environments - Awareness of electromagnetic interference, EMC requirements and their impact on telecoms design - Awareness of Earth Potential Rise and why it affects telecoms delivery into substations - Experience supporting telecoms delivery into substations, utilities, rail, power, industrial or other controlled environments - Knowledge of telecoms cabinet/rack requirements, including EMC cabinets, gland plates, filters, ventilation and cable entry - Experience coordinating with BT/Openreach, field engineers, commissioning teams and equipment suppliers - Strong documentation discipline and ability to produce clear implementation-ready design outputs LA International is an award-winning partner of choice for many of the world's most influential companies and government organisations. Holding Enhanced Government Security Accreditation, we are recognised as the European market leader in the delivery of Security Cleared talent to organisations that demand the very highest levels of security, compliance and assurance. A multiple award-winning organisation, having secured the prestigious Queens Award for Enterprise: International Trade over consecutive years. We are committed to fostering an inclusive, equitable and accessible workplace where everyone feels valued and supported. We welcome applications from all individuals, regardless of background or identity, and we encourage candidates who may not meet every listed requirement to still apply. If you require any adjustments or support during the recruitment process, please let us know and we will work with you to ensure a fair and accessible experience. Please Note: If a high volume of applications is received, only candidates shortlisted will be contacted.
May 14, 2026
Contractor
Our telecoms client is looking for EAD Circuit Designers for their client is Glasgow. This role is mainly remote with occasional travel to site or stakeholder workshops in Glasgow. This is a 3-6 months contract initially and the rate is £300-£310 per day outside IR35. We are looking for an experienced EAD Circuit Designer to support telecoms circuit delivery into electricity substation and utility environments. This is not a standard network design role. The person must have strong experience in BT/Openreach EAD/Ethernet access circuit delivery, with the ability to assess site feasibility, interpret survey outputs, understand access constraints, and produce practical design packs for implementation. The role is specifically focused on sites where telecoms delivery may be affected by electromagnetic interference, EMC requirements, Earth Potential Rise, fibre/copper suitability, cabinet specification, cable entry, ventilation, earthing, and substation access constraints. The designer will work with engineering, stakeholders, field engineers, commissioning teams and cabinet suppliers to ensure each circuit design is technically feasible, safe, installable and supportable. Required skills and experience: - Hands-on experience designing BT/Openreach EAD, Ethernet access, leased line or carrier Ethernet circuits - Strong understanding of BT/Openreach delivery life cycle, including survey, order validation, civils, provisioning, wayleaves and site readiness - Experience producing telecoms access design packs, HLDs, LLDs, implementation diagrams or as-built documentation - Ability to interpret site surveys, task sheets, supplier notes and technical constraints - Experience working with fibre access design and circuit routing - Understanding of copper access limitations in electrically sensitive or high-voltage environments - Awareness of electromagnetic interference, EMC requirements and their impact on telecoms design - Awareness of Earth Potential Rise and why it affects telecoms delivery into substations - Experience supporting telecoms delivery into substations, utilities, rail, power, industrial or other controlled environments - Knowledge of telecoms cabinet/rack requirements, including EMC cabinets, gland plates, filters, ventilation and cable entry - Experience coordinating with BT/Openreach, field engineers, commissioning teams and equipment suppliers - Strong documentation discipline and ability to produce clear implementation-ready design outputs LA International is an award-winning partner of choice for many of the world's most influential companies and government organisations. Holding Enhanced Government Security Accreditation, we are recognised as the European market leader in the delivery of Security Cleared talent to organisations that demand the very highest levels of security, compliance and assurance. A multiple award-winning organisation, having secured the prestigious Queens Award for Enterprise: International Trade over consecutive years. We are committed to fostering an inclusive, equitable and accessible workplace where everyone feels valued and supported. We welcome applications from all individuals, regardless of background or identity, and we encourage candidates who may not meet every listed requirement to still apply. If you require any adjustments or support during the recruitment process, please let us know and we will work with you to ensure a fair and accessible experience. Please Note: If a high volume of applications is received, only candidates shortlisted will be contacted.
