914 jobs found

Job Title: Hardware Design Engineer Location: Clacton-on-Sea Salary: £45,000 to £55,000 Employment Type: Permanent Working Arrangements: Onsite working We re supporting a growing engineering business in Clacton-on-Sea that is looking for a Hardware Design Engineer to play a key role in new product development. This role is ideal for someone who enjoys hands-on electronic design, problem solving, and contributing to the full lifecycle of high performance hardware products. What you ll be doing Designing and developing digital and analogue hardware for new and existing products Creating detailed schematics and PCB layouts using industry standard tools (Altium advantageous) Selecting components and performing analysis to ensure optimal performance and reliability Developing and executing test plans for prototypes and production units Debugging and validating hardware using oscilloscopes, logic analysers, spectrum analysers and other lab equipment Working closely with firmware, mechanical, test, NPI and manufacturing teams to ensure seamless integration Supporting products through the full lifecycle, from concept through to end of life Producing and maintaining technical documentation and participating in design reviews Providing support to production and, where required, assisting customers and sales teams What you ll bring Strong background in hardware design for electronic products Proficiency in schematic capture and PCB layout Solid understanding of circuit design principles, including power supplies, signal integrity and noise mitigation Hands on experience with lab test equipment Experience working within multi disciplinary engineering teams RF design experience is beneficial but not essential A proactive, detail focused approach with good communication skills Why join? High level of involvement across the full hardware development lifecycle Opportunity to influence product direction and engineering decisions Supportive, collaborative engineering culture Stable, growing business with long term opportunities On site role in Colchester within a close knit technical team For more information, please contact Cathy Swain. T: (phone number removed) E: (url removed)

We are looking for a Systems Engineer to support the design, integration, and delivery of complex engineering products within a highly technical environment. Key Responsibilities Systems design, integration, and testing Support full product lifecycle (concept through to in-service support) Work across multidisciplinary teams (software, mechanical, electrical) Produce technical proposals, specifications, and reports Mentor junior engineers where required Deliver engineering work packages to time, cost, and quality Requirements Degree in Engineering, Mathematics, Physics, or equivalent experience Experience in systems design, integration and test Understanding of product and systems lifecycles Strong communication skills and customer-facing capability

Senior Test Engineer Location: Horsham Job Type: Permanent A high-growth clean energy engineering business is seeking a Senior Test Engineer to take ownership of complex test and validation activities supporting advanced electro-mechanical systems. This Senior Test Engineer position sits at the centre of product development, working across engineering teams to deliver structured, high-quality testing that directly influences product performance, reliability, and commercial deployment. As a Senior Test Engineer , you will be responsible for executing verification and validation programmes, commissioning test rigs, analysing data, and leading fault-finding investigations. You will also play a key role in improving test processes, developing documentation, and mentoring junior engineers. This role suits a hands-on Senior Test Engineer who enjoys working with real hardware, solving technical problems, and taking ownership of test outcomes in a structured engineering environment. Key responsibilities Execute verification, validation, and development testing activities Prepare, commission, and operate test stands and rigs Analyse test data, identify trends, and produce detailed reports Lead fault-finding and root cause investigations on complex systems Develop test procedures, SOPs, and risk assessments Support test planning, scheduling, and continuous improvement Collaborate with design and systems teams on test capability development Provide technical guidance and mentoring to junior engineers Requirements Degree in Mechanical Engineering, Electrical/Electronic Engineering, Physics or similar Several years experience in a hands-on test or validation role Strong experience with test rigs, instrumentation, and data analysis Proven fault-finding and root cause investigation capability Ability to read and interpret mechanical drawings, schematics, and P&IDs Experience producing technical reports and presenting findings Familiarity with safety tools such as HAZOP, HAZID, FMEA or similar Ability to manage workloads and deliver against multiple priorities Desirable Experience with electro-mechanical systems, energy systems, or complex hardware Exposure to thermodynamics, efficiency calculations, or heat balances Experience working in R&D or product development environments What this role offers Exposure to advanced engineering technology with real-world impact A technically challenging environment with strong engineering standards Opportunity to influence test strategy and system performance Clear progression into senior technical or leadership roles

Inside IR35 An opportunity to become a member of Europe's No. 1 Missile Systems company as a design draughtsperson in the mechanical engineering function, you will work closely with a wide range of project teams to develop definitions to meet our manufacturers and customer's needs. Responsibilities: Must have a strong background in the ability to create 2D and 3D definitions click apply for full job details

Mechanical Design Engineer East Midlands - commutable from Derby, Leicester and Nottingham to c£46k neg dep exp + benefits Our client can demonstrate almost half a century's expertise in the design, development and manufacture of bespoke automation and robotic systems for a diverse range of industry sectors and are regarded by many in the industry as one of the leading automation system solution pro click apply for full job details

We're looking for a talented 3D CAD / BIM Technician to bring technical excellence, creativity, and collaboration to our growing Design Team. In this role, you'll take the lead in developing detailed 3D models and technical drawings for a diverse range of water and wastewater treatment projects. You'll work closely with multidisciplinary teams to ensure digital designs meet industry standards, support project coordination, and contribute to the continual enhancement of our BIM workflows. Alongside hands-on modelling work, you'll also provide mentorship, helping junior technicians develop their own expertise and confidence. This is an opportunity to combine technical skill with leadership, driving quality and innovation across our digital design processes. We're looking forward to expanding our team to Glasgow. Please note that the role requires for you to be in the office or on site at least 3 days a week. About Enisca Browne Enisca Browne is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. Together we deliver essential infrastructure that supports clean water, safe drainage and reliable services for communities. Enisca Browne focuses on the systems that keep water and wastewater treatment sites running at their best. We work on power, process equipment, control systems and the civil structures that support them. As the Group's mechanical, electrical, instrumentation, control and automation specialist, we manage everything from control panel manufacturing to full system integration and commissioning. Our teams bring deep technical knowledge and a collaborative approach to solving real-world challenges. We offer opportunities for people with a range of skills and backgrounds, from hands-on engineering to project support and technical delivery. Everyone plays a part in helping us deliver safe, smart and sustainable solutions. What We're Looking For We're seeking someone who combines strong technical ability with a collaborative mindset and a passion for high-quality design. The ideal candidate will bring experience, problem-solving capability, and a desire to help advance our digital engineering practices. Experience 5+ years as a CAD/BIM Technician, ideally with water or wastewater sector experience. Proficient in BIM tools (Revit, Navisworks) and CAD software (AutoCAD or similar), including managing complex models. Skilled in clash detection, model coordination, and multidisciplinary BIM integration. Strong understanding of technical drawings, specifications, and quality-control processes. Familiarity with infrastructure-related CAD/BIM standards and regulations. Knowledge & Skills High attention to detail, accuracy, and strong organisational skills, with effective communication and cross-discipline collaboration. Problem-solver with experience mentoring junior team members and supporting project coordination, documentation, and BIM workflows. Diploma or degree in Engineering, Architecture, Drafting, or related field, with proven experience ensuring model accuracy, compliance, and effective workflow management. If you're passionate about high-quality digital design, eager to collaborate across disciplines, and ready to contribute to essential infrastructure projects, we'd love to hear from you. Join us and help deliver innovative solutions that make a real impact. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.

Engineering Manager - Data Centre - Critical Infastructures Your new company A market-leading facilities and critical environments specialist, to recruit an experienced Engineering Manager to support major data centre projects for a blue-chip client.This is a technically focused leadership role, ideal for someone with strong electrical and mechanical expertise who enjoys operating at the centre of complex, safety-critical engineering environments. Your new role You'll play a pivotal role providing engineering oversight across electrical, mechanical and controls systems, ensuring designs and delivery meet exacting client standards and international best practice.Working closely with Project Managers, Construction Managers and client engineering teams, you'll help drive integration, risk management, commissioning and continuous improvement across highly resilient data centre infrastructure. Provide senior engineering leadership across data centre systemsReview and approve designs, drawings and technical submissionsEnsure compliance with client standards, local codes and global best practiceIdentify and mitigate technical and safety risks (LOTO, energy isolation, etc.)Support commissioning and integrated systems testingCoordinate with CAD/BIM teams to maintain accurate documentationChair technical coordination meetings and act as client technical liaison.Drive innovation, value engineering and sustainable solutionsMaintain engineering registers, governance and audit readiness What you'll need to succeed Extensive experience in data centre or critical infrastructure engineering Strong technical knowledge of HV/LV, cooling systems and controls Experience managing multidisciplinary engineering teams and interfaces Confident communicator with strong stakeholder management skills Degree in Electrical, Mechanical or Building Services Engineering Chartered Engineer (CEng) status BIM and Primavera P6 exposure Familiarity with G-Suite environments What you'll get in return An initial interim assignment at competitive rate This is a chance to join a forward-thinking, people-first organisation recognised for innovation, safety and engineering excellence. You'll work on high-profile, technically challenging environments with long-term prospects and genuine professional development. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #

Are you a skilled civil engineer with a passion for designing sustainable infrastructure? We're looking for a Civil Design Engineer to join our team and deliver innovative solutions for water and wastewater treatment projects. Working as a key member of our Design Team, you will take responsibility for coordinating, reviewing, and developing civil design packages, ensuring every solution meets project requirements, buildability expectations, and regulatory standards. In this role, you'll lead the civil design scope across multiple projects, managing external consultants, liaising directly with clients, and ensuring designs integrate smoothly with mechanical, electrical, and process engineering disciplines. From feasibility assessments and technical documentation to design risk reviews and supporting construction phases, you'll help deliver efficient, safe, and cost-effective solutions throughout the entire project lifecycle. We're looking forward to expanding our team to Glasgow. Please note that the role requires for you to be in the office or on site at least 3 days a week. About Enisca Browne Enisca Browne is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. Together we deliver essential infrastructure that supports clean water, safe drainage and reliable services for communities. Enisca Browne focuses on the systems that keep water and wastewater treatment sites running at their best. We work on power, process equipment, control systems and the civil structures that support them. As the Group's mechanical, electrical, instrumentation, control and automation specialist, we manage everything from control panel manufacturing to full system integration and commissioning. Our teams bring deep technical knowledge and a collaborative approach to solving real-world challenges. We offer opportunities for people with a range of skills and backgrounds, from hands-on engineering to project support and technical delivery. Everyone plays a part in helping us deliver safe, smart and sustainable solutions. What We're Looking For We're seeking someone who brings technical depth, design leadership, and a collaborative mindset. You'll thrive in a multidisciplinary environment and enjoy influencing the development of sustainable, practical, and innovative designs. Skills & Knowledge Strong leadership and coordination skills, with experience overseeing external consultants and collaborating effectively with clients and multidisciplinary teams. Detail-focused, analytical, and proactive, with strong problem-solving abilities and the organisation to manage multiple design workstreams. Excellent communication skills and a commitment to continuous learning and professional development. Experience 5+ years' civil design engineering experience, ideally within water or wastewater, including managing and reviewing external design consultants. Proven ability to develop civil works packages (earthworks, foundations, structures, drainage) with an understanding of construction methods, buildability, and relevant engineering standards. Essential Qualifications Bachelor's degree in Civil Engineering or related discipline, with proficiency in civil design software (e.g., AutoCAD Civil 3D, Revit) and understanding of BIM processes and collaborative design workflows. If you're passionate about designing infrastructure that has real-world impact and want to work in a team where your expertise helps deliver safe, sustainable, future-ready solutions we'd love to hear from you. Apply today and help us engineer a better tomorrow. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.

We are seeking a Senior Design Manager to take a leading role in driving consistency, quality, and innovation across our UK design operations. This pivotal position focuses on embedding best-practice design management processes, performance frameworks, and reporting standards across all regions, ensuring our teams deliver high-quality outcomes that meet both client expectations and organisational goals. Alongside strategic oversight, the Senior Design Manager will also have the flexibility to step in as a project-level Design Manager for key schemes, providing hands-on leadership to multidisciplinary teams. Central to the role is the mentoring and professional development of Design Managers, fostering a culture of collaboration, continuous improvement, and technical excellence that elevates our entire design function. We're looking forward to expanding our team to Glasgow. Please note that this role requires you to be in the office or on site at least 3 times a week. About Enisca Browne Enisca Browne is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. Together we deliver essential infrastructure that supports clean water, safe drainage and reliable services for communities. Enisca Browne focuses on the systems that keep water and wastewater treatment sites running at their best. We work on power, process equipment, control systems and the civil structures that support them. As the Group's mechanical, electrical, instrumentation, control and automation specialist, we manage everything from control panel manufacturing to full system integration and commissioning. Our teams bring deep technical knowledge and a collaborative approach to solving real-world challenges. We offer opportunities for people with a range of skills and backgrounds, from hands-on engineering to project support and technical delivery. Everyone plays a part in helping us deliver safe, smart and sustainable solutions. What We're Looking For We're looking for an experienced design leader who combines strategic insight with a practical understanding of project delivery. Someone who excels at guiding teams, building strong relationships, and championing consistency, quality, and innovation across diverse regions and project types. Experience 10+ years' experience in design management, with extensive exposure to water and wastewater projects. Proven leadership of multidisciplinary design teams or regional design functions. Experience balancing strategic oversight with hands-on project-level delivery. Strong background in establishing and managing design performance frameworks. In-depth understanding of CDM regulations and the integration of health and safety in design. Knowledge & Skills Strategic thinker with strong leadership and mentoring capability. Excellent communication and stakeholder-engagement skills. Highly organised and detail-driven, ensuring consistency across regions. Proactive, analytical mindset with a commitment to continuous improvement. Collaborative and adaptable, confident working across multiple teams and locations. Advanced understanding of water and wastewater treatment technologies. Essential Qualifications Bachelor's degree in Engineering, Design Management, or a related discipline. Chartered status or working towards it. If you're ready to shape the future of design delivery, mentor talented teams, and elevate standards across a national portfolio, we'd love to hear from you. Apply today and lead the next chapter of design excellence across our UK projects. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.

Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Do you have experience with SysML or Rhapsody? Do you have hands-on experience with DOORS and DOORS NG? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Systems V&V Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: Test Strategy & Development: Defining test requirements, creating test plans, scoping frontend activities with the customer ensuring that requirements are met and understood System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards Influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects Supporting new product bid activities Identify, document, and deploy best practice across the department and within projects Your skillset may include: Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators) Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody Experience in DfT and testability RF / Microwave systems knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

We are looking for a Hardware Engineer to join our UK Team! Our Curtiss Wright Avionics, Video and Systems unit based in our state-of-the-art facility at Bournemouth Airport is looking for a Hardware Engineer to join the design team in our Letchworth office. You will be responsible for implementing all aspects of the electronic design and development process, from initial concept through to the completion of sealed data packs. You will also liaise with software engineers, mechanical engineers, manufacturing and sales to ensure product is fit for purpose, cost effective and reliable. Location: Letchworth office, UK. We Take Care of Our People Work-life balance through our Hybrid working, flexitime program and condensed work week (role dependent) I Paid Time Off I Retirement with Employer Match I Health and Wellness Benefits I Learning and Development Opportunities I Competitive Pay I Bonus Scheme I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: Participate individually and as part of an integrated project team in the design of the Company s products. Design and develop new flight recorder, air data computer, ruggedised computer system or video products. Maintain the existing product line including obsolescence management, periodic circuit uplift and production support. Witnessing and ensuring allocated qualification tests are completed successfully, both in-house and at external test houses. To write formal design documentation To attend and actively contribute to the effective operation of applicable design reviews. To accept technical responsibility for allocated design tasks, with the help of senior engineers. To assist Production Engineering in the introduction of equipment into manufacture in a cost effective and timely manner Occasionally representing the Hardware function internally, and externally with the help of senior engineers. Infrequent UK and international travel may be required. What You Bring: Educated to Degree/HND level in an appropriate technical subject, with several years in industry. Some experience in embedded systems, digital and analogue design. Familiar with small Microprocessor and microcontroller systems Familiar with Schematic and some knowledge of layout design using ORCAD, MENTOR or similar packages. Familiar, or willing to learn, Op Amp level analogue & DC-DC PSU design. Familiar, or willing to learn, Design for EMC. Flexible and able to contribute towards Environmental Testing to standards such as RTCA/DO-160, including detailed test specification and report writing. Ability to fault find down to a board level. Experience working closely with or in production is advantageous. Experience within an aerospace/automotive/medical/safety-critical environment is advantageous. At or working towards MIET and IEng. About Us Our Values Environmental, Social and Governance Curtiss-Wright's Defense Solution division is a trusted, proven leader, delivering superior products and services that meet the defense and aerospace industries' toughest challenges with best-in-class value. In 2017, Curtiss-Wright relocated its Avionics, Sensors & Controls and Industrial Business Units into a brand new, purpose-built 160,000 ft2 facility at Bournemouth International Airport. The state-of-the-art facility has extensive design and manufacturing capabilities as well as in-house environmental stress screening. The facility is committed to quality and excellence in manufacturing for our flight recorder, air data computer, video management systems, computing systems, mission displays and video recorder products. As the design center of excellence for flight recorders and air data computers, the units had to be lightweight and small crash survivability requirements exceeding the existing standards for commercial aircraft. Please note, benefits are country specific and may vary from location to location No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

A market-leading, international manufacturer of Point of Sale equipment is seeking to hire a Development Design Engineer. Based in Loughborough, you will be designing promotional marketing equipment for major cosmetics brands. Your designs will be used to promote the latest make-up products in retailers all over the world. As Development Design Engineer will you be responsible for: Development of complete systems using plastic injection moulding, fabricated metal and acrylic, MDF and wood. 3D CAD using Solidworks. Prototype building and testing. Product development from concept through to production. To be successful as a Development Design Engineer, you will have: Proven experience as a Mechanical Design Engineer, Development Design Engineer, Development Designer or Product Designer. Experience in fast-paced design studios (such as point-of-sale or consultancies). Detail design for manufacture of plastic injection moulded parts, assemblies and mechanisms. 3D CAD (solid modelling and detailed technical drawings). Solidworks experience. In return you will receive the following: 40,000 - 45,000 annual salary. Opportunity to travel the world. Pension. 23 days holiday (plus bank holidays). Full training and continuous development. If you would like to find out more about this opportunity, click the "APPLY NOW" button below and we'll be in touch.

Job Description About the Role NOV Fiber Glass Systems UK Ltd is seeking a Graduate Engineer to join our Plymouth engineering team in a full-time position commencing in July 2026. This role is ideally suited to a graduate with an interest or background in structural or composite engineering who is eager to develop practical engineering design experience within a leading global organisation. Reporting to the Senior Engineering Manager, the successful candidate will support a variety of projects across the Civil, Construction, and Oil & Gas sectors. The role offers exposure to structural calculations, product design, finite element analysis, technical documentation, and innovative engineering solutions, alongside sponsored professional development through MSc to Chartered Engineer (CEng) progression. About the Company NOV Fiber Glass Systems UK Ltd designs, manufactures, and installs advanced composite and thermoplastic solutions for a broad range of industries, including Oil & Gas, Marine & Offshore, Waste Water, and Naval sectors. Bespoke systems are engineered to meet customer-specific requirements while maintaining high standards of safety, quality, and innovation. As part of NOV, a globally recognised leader in energy industry technology and services, we are committed to delivering engineering excellence and supporting the development of future talent. What We Offer Opportunity to join an industry-leading engineering business Exposure to diverse and technically challenging projects Structured development and mentoring from experienced engineering professionals Sponsored progression through MSc to Chartered Engineer (CEng) status Career development opportunities within a global organisation Collaborative and professional working environment Hands-on experience with advanced engineering technologies and methodologies Key Responsibilities Essential Responsibilities Provide engineering support across structural and civil engineering activities, including structural calculations, laminate and joint design, finite element analysis (FEA), structural system design, and product innovation. Produce draft engineering designs for review by the Senior Engineering Manager. Revise and correct engineering designs for client review under the direction of the Senior Engineering Manager. Prepare technical documentation for approval. Complete NOV software, technical, and general training requirements. Support additional engineering and operational activities as required by the business and line management. Qualifications & Skills Essential Qualifications Degree in Structural Engineering, Civil Engineering, Mechanical Engineering, Composite Engineering, or a related discipline, ensures strong foundational engineering knowledge. Engineering fundamentals: Strong understanding of mechanics, stress analysis principles, technical drawing (3D CAD proficiency), materials science with some knowledge of fibre reinforced composite materials and related manufacturing methods Ability to manage workload effectively and prioritise tasks to meet deadlines. Good written and verbal communication skills for technical reporting and collaboration. Proficiency in Microsoft Office and willingness to learn specialist engineering software and tools. Desired Qualifications Exposure to Finite Element Analysis (FEA) software or structural design tools. Knowledge of composite materials and structural systems. Previous internship, placement, or project experience within engineering or manufacturing environments. Understanding of engineering standards, regulations, and best practices relevant to Civil, Construction, or Oil & Gas sectors. Soft Skills Strategic thinker with the ability to quickly learn and adapt to new challenges. Strong customer focus with commitment to internal and external stakeholder support. Collaborative team player who works effectively with peers to solve problems. Professional and confident communicator in both written and verbal interactions. Self-motivated with a commitment to continuous learning and career development. Able to exercise sound judgement while working under pressure and within deadlines. Positive attitude toward challenges and continuous improvement opportunities. Why Join Us? Join our Global Family: We offer an inspiring place to work with great opportunities to develop your skills and the opportunity to work with the brightest minds in the oil and gas industry. You will become part of a professional culture where we work together in teams with other dedicated professionals to achieve common goals. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team

Principal Mechanical Design Engineer - Data Centres Location: South London About the Role We are looking for an experienced Principal Mechanical Design Engineer to lead the design and delivery of large-scale, mission-critical data centre projects . This is a senior leadership opportunity for someone with strong technical expertise in cooling systems, resilience design, and high-performance building services within critical environments. You will play a key role in developing innovative, efficient, and resilient mechanical systems for hyperscale and colocation data centres, working closely with multidisciplinary teams and high-profile clients. Key Responsibilities Lead the mechanical design of major data centre projects from concept through to delivery Design and oversee cooling strategies including chilled water systems, CRAH/CRAC units, direct/indirect air cooling, and liquid cooling solutions Develop resilient systems aligned with Tier classifications (N+1, 2N, etc.) Provide technical leadership across engineering teams and mentor junior engineers Work closely with electrical, structural, and architectural teams to ensure integrated design solutions Engage directly with clients, contractors, and stakeholders Lead design reviews , ensure compliance with industry standards, and drive best practice Champion sustainability, energy efficiency, and low PUE design strategies Key Requirements Degree qualified in Mechanical Engineering or Building Services Engineering Chartered Engineer (CEng) or working towards chartership Significant experience delivering data centre or mission-critical projects Strong knowledge of: Chilled water systems and plant design Airflow management and thermal modelling Cooling technologies for high-density environments Mechanical resilience strategies for critical infrastructure Familiarity with industry tools (e.g., IES, Hevacomp, Revit, CFD modelling tools) Excellent leadership, communication, and client-facing skills Desirable Experience Experience working on hyperscale or colocation data centres Exposure to liquid cooling or emerging cooling technologies International project experience Knowledge of sustainability frameworks and carbon reduction strategies What's on Offer Opportunity to lead cutting-edge data centre projects at scale A collaborative, innovative engineering environment Clear progression to Associate / Director level Competitive salary and benefits package Flexible and hybrid working Apply Now If you are a driven mechanical engineer with a passion for delivering high-performance critical infrastructure, we'd love to hear from you.

Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Do you have experience carrying out thermal analysis of electronics? Do you have experience with MATLAB/Simulink? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Principal Thermal Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Take ownership of delivering packages of thermal analysis work Provide mechanical analysis support to develop designs and deliver thermal performance evidence Deliver analysis evidence in clear reports with firm conclusion statements Participate in team meetings and design reviews Manage workload against time schedules and report progress regularly to stakeholders Responsible for dealing and collaborating with project stakeholders (internal & external) Your skillset may include: Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS) Experience carrying out studies to determine the effects of conduction, convection, and radiation on the thermal response of systems Thermal analysis of electronics Application of MATLAB-Simulink to deliver thermal studies Use of CFD to assess thermal behaviour Scripting using MATLAB or Python If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Principal Thermal Engineer 12 month contract Based in Stevenage Offering 50ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to 48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham

Mechanical Design Engineer Warwick - Hybrid £40,000 - £55,000 + Benefits - Permanent VIQU are working with an established engineering manufacturer delivering large-scale, heavy-duty mechanical systems to recruit a Mechanical Design Engineer with strong experience in structural fabrications and load-bearing equipment. This role is focused on heavy fabricated structures (3mm plate and above) Key Responsibilities of the Mechanical Design Engineer: Design and develop heavy-duty fabricated structures and assemblies Design and detail welded and bolted joints for structural applications Produce 3D models, assemblies and 2D manufacturing drawings with full GD&T/GPS Apply strong mechanical reasoning to understand load paths, stress, deflection and structural behaviour Support validation, verification and design reviews for large mechanical systems Work closely with manufacturing to ensure practical, buildable designs Investigate field and service issues, contributing to root cause analysis and corrective actions Support engineering change management and continuous improvement initiatives Key Requirements of the Mechanical Design Engineer: HNC/HND or Degree in Mechanical Engineering Proven experience designing heavy fabrications (3mm+ plate and welded structures) Experience with large mechanical systems such as cranes, lifting equipment, process plant, construction machinery, agricultural machinery, rail or similar heavy engineered products Strong understanding of welded structures and bolted joint design Ability to produce accurate 2D drawings with appropriate GD&T/GPS application Solid mechanical fundamentals with the ability to understand structural load paths and failure modes Experience resolving in-service or field performance issues 3D CAD experience required (Solid Edge preferred; SolidWorks or Creo considered) Apply now to speak with VIQU in confidence. Or reach out to Phoebe Rees directly. Do you know someone suitable? We offer up to £1,000 for successful referrals (terms apply). For more engineering opportunities, follow VIQU on LinkedIn.

Job Title: NPI Programme Manager Location: Stafford (Full Onsite) Rate: £46.61 per hour Duration: 6 months (likely to extend) Start Date: ASAP The Opportunity We are seeking an experienced NPI Programme Manager to lead multiple high-profile New Product Introduction (NPI) programmes within a fast-paced engineering environment. This is a fantastic opportunity to work on cutting-edge product development initiatives, collaborating with global, cross-functional teams to bring new technologies and products to market. You will play a key role in delivering programmes that drive business growth, increase revenue, and expand product portfolios. Key Responsibilities Lead and manage 4-6 concurrent NPI programmes from launch through to production. Develop and maintain comprehensive project plans , ensuring alignment with programme gateways and delivery milestones. Provide weekly and monthly programme updates , highlighting progress, risks, and mitigation plans. Coordinate and facilitate key meetings including: Governance reviews Stakeholder updates Gateway reviews Issue resolution sessions Manage cross-functional teams across engineering, operations, and other business units. Oversee development builds, pilot phases, field follow-up, and initial production. Ensure alignment with product strategy, financial targets, and cost objectives . Identify risks, resolve complex issues, and drive continuous improvement initiatives. Build strong relationships across departments and mentor junior team members. Essential Requirements Degree in Engineering or equivalent experience (10+ years in project management). Minimum 10 years' experience in engineering, design, development, or operations. At least 5 years leading cross-functional teams . Proven experience in: Engineering project management Stakeholder management Working within cross-functional environments Desirable Skills & Experience Background in engine, electric power, automotive, aerospace, or mechanical manufacturing industries. Strong organisational and time management skills. Excellent communication and problem-solving abilities. Ability to work independently and take initiative. Proficiency in: Microsoft Project Excel PowerPoint Teams Word Working Environment Full onsite role based in Stafford. Working hours: Monday - Thursday: 08:00 - 16:30 Friday: 08:00 - 13:00 (with some flexibility) PPE will be provided. Team Structure You will join an 8-person programme team , consisting of Programme Managers, Programme Leads, and Coordinators, working collaboratively to deliver complex NPI projects. Why Apply? Work on innovative new product introduction programmes with global impact. Be part of a collaborative, high-performing engineering team. Opportunity to influence product strategy and drive business growth. Strong likelihood of contract extension based on performance and business needs. Interview Process Single-stage, face-to-face interview (60 minutes) Conducted by the Hiring Manager and a team member Competency-based (STAR format) If you are a driven NPI professional with a passion for delivering complex engineering programmes, we'd love to hear from you. Apply now to be part of a team shaping the future of engineering innovation.