550 jobs found

Material Handler (Sennebogen) & Wheeled Loading Shovel Operator Cardiff Permanent PAYE Available Shifts - 4 on 4 off 6am - 6pm or 6am - 4pm Monday to Friday i Introduction Acorn by Synergie is recruiting an experienced Material Handler (Sennebogen) & Wheeled Loading Shovel Operator for an ongoing position in Cardiff. This role offers the opportunity to join a busy recycling facility with a permanent contract available for the right candidate. Key Responsibilities Conduct pre-start checks and ensure machinery is safe and operational. Operate Material Handlers (Sennebogen, Fuchs, Liebherr) or similar safely and efficiently. Operate wheeled loading shovels and 360 excavators in line with site procedures. Work to established protocols while adhering to cardinal safety rules. Maintain a clean and organised work area. Comply with site health, safety, and environmental policies. Be prepared for due cause substance testing as required. About You / Requirements Previous experience operating Material Handlers and Wheeled Loading Shovels in recycling or similar facilities. UK Driving Licence. CPCS / NPORS or equivalent qualifications (desirable) for 360 Wheeled Excavator / Wheeled Loading Shovel. Reliable, proactive, and safety-conscious. Able to work 40-60 hours per week, including potential overtime. What We Offer Permanent position for the right candidate. Competitive PAYE rates with premium overtime payable. Immediate start available. Supportive working environment with structured processes and training. Interested? Apply now with your CV or contact the Acorn by Synergie team for further information.

Machine Operative Location: Braintree Hours: 40 hours per week, Monday to Friday Pay Rate: £12.71 per hour Contract Type: Temporary About the Role We are currently recruiting for reliable and hardworking Machine Operatives to join a busy and growing manufacturing environment in Braintree. This is a fantastic opportunity for individuals who are looking for stable, full-time hours with the possibility of a long-term career. Key Responsibilities Operating machinery safely and efficiently in line with company procedures Monitoring production processes to ensure quality standards are met Carrying out basic machine adjustments and reporting faults where necessary Performing routine checks and maintaining a clean, organised work area Working as part of a team to meet daily production targets Following all health and safety guidelines at all times Requirements Previous experience in a manufacturing or machine operating role is desirable but not essential Good attention to detail and commitment to quality Ability to work in a fast-paced environment Strong reliability and punctuality A positive attitude and willingness to learn What's on Offer Competitive pay at £12.71 per hour Full-time hours, Monday to Friday (no weekends) Supportive team environment with training provided Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Saw Operator to work a weekend shift (6am to 6pm Sat & Sun), paying 25.96 per hour -based in Patchway / Cribbs Causeway, Bristol. Temporary ongoing position - Benefits include 28 days holiday, Pension, Onsite parking. Immediate start Reporting to the Production Manager and working as part of a team, this role would suit someone who has previously worked as a Saw Operator or Machine Operator or Metal Finisher within an engineering or manufacturing environment and has an understanding of engineering drawings. Previous experience of using aband saw, bar saw or similar would be ideal, as would working with metal or wood. Duties of the Saw Operator will include: Following drawings and work orders to cut materials to size and thickness Checking materials and carrying out quality checks Inspecting first off, using tape, micrometers and calliper instruments Stamping and labelling finished goods Using FLT and some warehouse duties The successful candidate will have previous machine operating experience and ideally have worked with metal parts and materials. You will be able to work from drawings and follow work instructions, as well as checking finished goods. In addition you will have good IT skills and enjoy working as part of a team in a fast paced, busy environment. In return you will be joining a well established and successful company as they go through a sustained period of growth, with plenty of opportunity for progression. Saw Operator 25.96 per hour Temporary ongoing position Patchway, Bristol Saturday & Sunday 6am to 6.00pm (24 hrs per week) Benefits include 28 days holiday, Pension, Onsite parking, Bonus This role would be suitable for someone who wants to work weekends only and who doesn't currently have a full time job which they would work alongside this role. To hear more about this or similar opportunities, please send your CV to (url removed) Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.

Eleven Eleven recruitment are seeking an experienced 360 Operator for work in Peterborough to start Wednesday 20th May. Location: Peterborough Role: 360 Operator Start: Wednesday 20th May Rate: 21.00ph Duration: 1 week Minimum Requirements: - CPCS / NPORS - PPE - 360 Experience - over 4 year's operating experience needed About the role: - Operating the 360 machine on site Payments: 21.00ph 9 hours paid Weekly pay To apply for the role call us on (phone number removed) or apply online to (url removed)

Sewing Machinist Location: Kirriemuir Pay Rate: £13.90 per hour Hours: Monday to Friday, rotating shifts (6am-2pm / 2pm-10pm) Contract: Ongoing temporary role with strong potential for permanent employment Build a Career with a Trusted Textile Manufacturer Are you an experienced Sewing Machinist or machine operator looking for stable work, long-term prospects and a supportive team environment? We are recruiting Sewing Machinists to join a well-established and respected textile manufacturer, producing high-quality technical textile products used across a range of industries. This is a hands-on, detail-focused role suited to individuals who take pride in their work, enjoy working with machinery, and perform well in a fast-paced production setting. With full training and ongoing support, this is an excellent opportunity to further develop your skills and build a long-term career. What You'll Be Doing Operating Industrial Sewing Machinery You will set up, operate and monitor industrial sewing machines, ensuring they run smoothly and efficiently throughout your shift while building confidence and technical skill. Maintaining Quality and Output You will work to production targets while maintaining high standards of quality and accuracy, ensuring all products meet required specifications. Quality Checks and Reporting You will carry out routine inspections, complete production records, and escalate any faults or concerns promptly to maintain consistent output. Working Safely and Keeping Standards High Health and safety are key. You will maintain a clean, organised workstation and follow all procedures to ensure a safe working environment. Contributing to a Strong Team Environment While managing your own machine, you'll be part of a wider production team where reliability, communication and teamwork are essential to success. What We're Looking For Previous sewing or machine operating experience is essential Experience within manufacturing or technical textiles is highly desirable Strong attention to detail and pride in producing quality work Good level of physical fitness for a hands-on role Ability to work independently and as part of a team A reliable, proactive approach with strong communication skills Flexibility to work rotating shifts and reliable transport What You'll Gain Training and Development Structured training and ongoing support to build your skills and confidence. Consistent Working Pattern Monday to Friday shifts with a clear and stable schedule. Competitive Pay £13.90 per hour while developing specialist manufacturing experience. Supportive Working Environment A professional, team-focused workplace where support and knowledge sharing are part of the culture. Long-Term Opportunities A genuine opportunity to secure permanent employment within a growing business. About the Workplace You'll be joining a well-organised production environment known for its high standards, strong team culture and focus on continuous improvement. Support from supervisors and experienced colleagues ensures you'll have everything you need to succeed. Ready to Apply? If you take pride in your work, have a keen eye for detail and are looking for a stable, long-term opportunity, we'd like to hear from you. Apply today to take the next step in your career as a Sewing Machinist. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

CNC Setter / Operator - Turning - Day Shift & Night Shift available Location: Tewkesbury Salary: Competitive + Monthly Bonus Hours: Mon-Thurs 8:00-17:00, Fri 8:00-13:00 or Mon-Thurs 16:30 - 02:45 Hawk 3 Talent Solutions are excited to be recruiting a CNC Setter / Operator for a modern, family run engineering business that's part of a growing international group. This is a great opportunity to join a high quality manufacturing environment with excellent long term prospects. The Role Set and operate CNC machines to produce precision components Complete "first off" checks and follow all QC procedures Work to engineering drawings, tolerances, and cycle times Maintain a clean, safe work area and follow H&S policies Suggest improvements to enhance quality and efficiency What You'll Get Competitive salary + monthly performance bonus Up to 25 days holiday + bank holidays Long service bonus Up to 6% pension & life assurance 9 weeks full sick pay Fully funded PPE + prescription safety glasses Full induction, ongoing training & career development Apprenticeships and further education opportunities Modern facility, landscaped grounds & onsite canteen Free tea/coffee, Christmas gift/party & overtime available Apply Today If you're an experienced CNC Setter / Operator looking for a stable, well supported role with genuine progression, Hawk 3 would love to hear from you. Apply today through Hawk 3 Talent Solutions to find out more. If you would like to apply for the role of CNC Setter then please email your CV to (url removed) or call Donna on (phone number removed).For a confidential discussion or to apply, contact Hawk 3 Talent Solutions today. Closing date is 18.06.2026 Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Production Operative Location: Darton Salary : £26,843 per annum Vacancy Type: Permanent - Full Time Closing date : May 27, 2026 The company are looking for a reliable and hardworking Guillotine Operator to join their busy team. This role involves working with sheet metal guillotines to cut materials accurately and safely, following drawings and job specifications. No previous guillotine experience is required, as full training will be provided. What's important to them is a strong attention to detail, confidence using basic measuring tools, and a hands-on approach to work. If you enjoy practical tasks, take pride in accuracy, and like being active on your feet in a workshop environment, they'd love to hear from you ! Shift pattern: Monday-Thursday - 7:45am-4:30pm Friday -8am-1pm Key Responsibilities Your main duties will be: Cutting down and finishing sheet material in line with customer requirements. Manufacturing pallets in line with bespoke jobs Packing products in line customer requirements and standard operating procedures The maintenance and accurate recording of all details on both the computer based stock control system and all other supporting documentation Promote continuous improvement processes to maximise stock productivity and minimise waste in all operational processes Ensuring that all products are handled in the most appropriate manner to eliminate any damage, or health hazards, in accordance with Health and Safety regulations and Aerospace Handling and Storage Procedures Ensuring the computer based stock control system is updated along with supporting documentation Responsible for ensuring all stock being processed is maximised to achieve the best stock utilisation possible in adherence with their quality and working procedures and practices Ensuring all stock and customer parts are clearly identified in accordance with both Thyssenkrupp and customer requirements at all times Ensure conformance to Health and Safety operating regulations for employees, visitors and self whilst engaged on company business General warehouse duties Skills, Knowledge and Expertise Your profile Essential experience, skills and knowledge: Previous experience on guillotining or similar machines Understanding of materials handling for all processed products in accordance with Health and Safety regulations Self-motivated, reliant, diligent, analytical and numerate PC Literate The ability to understand and use various types of measuring equipment Ability to be trained and understand being a business approved stamp holder Desirable experience, skills and knowledge: Counter balance truck licence Understanding of Health and Safety at Work legislation and its practical application Understanding of the full scope of quality processes applicable to handling of materials Ability to use all relevant areas of manufacturing computer based control system and all its supporting requirements Benefits Annual Leave: 25 days holiday + 8 bank holidays + your birthday Health Cash Plan (after 6 months) Company bonus scheme Advantageous pension scheme Learning & Development opportunities Advanced Family Friendly Policies Employee high street vouchers & discounts Employee Assistance Programme Occupational health & health surveillance Length of Service Awards Christmas savings scheme Eye care vouchers Cycle to Work Scheme Wellbeing events Recognition Portal Rewards Portal Company events Company share schemes Christmas Closedown About the Company The company operates a network of 8 sites with just under 500 employees in England and Northern Ireland which are in; Birmingham, Preston, Darton, Milton Keynes, and two sites in Belfast. They offer a vast range of metal material products such as stainless steel, aluminium and mild steel. They also provide a range of services, whether it be fully welded and fabricated finished parts or bespoke flat products cut to exact sizes. They have years of experience in the aerospace, construction and architecture, automotive and the general engineering industries. To Apply If you feel you are a suitable candidate and would like to work for the company, please click apply.

Position : Turning Programmer/Setter/Operator Salary: Between £53,000 - £63,000 per annum, depending on experience, plus overtime plus benefits Hours: Monday to Thursday 14:45 Midnight (classed as 2nd shift) You would need to work the 1st shift until training has been completed successfully. The 1st Shift hours are 6:30am to 3:15pm Monday to Thursday and 6am to 1pm Friday each week Location: Commutable from Camberley, Bracknell, Farnborough, Farnham, Guildford, Aldershot and surrounding areas Company An established and growing manufacturing company who precision machined parts and solutions to various industries, mainly Aerospace and Defence, are on the lookout for a Turning Programmer/Setter/Operator. If you re looking for a role and company where you will receive job satisfaction, rewards and recognition, are hard working with a positive and a flexible attitude to work with excellent attention to detail and can work effectively and efficiently to meet target deadlines then this role could be for you The environment is modern, clean and working with new cutting edge technologies. Responsibilities The role will involve programming, setting and operating various machinery (including CNC, Mazak, etc.), producing precision components in line with engineering drawings and customer specifications in the aerospace and automotive industry. The role ensures machines are correctly prepared, tooling is optimised, and components are produced efficiently while maintaining the highest standards of quality and safety. Program, set, and operate CNC turning/milling machines Set up machines, tooling, and materials for upcoming jobs within required timeframes Read, understand, and edit CNC programs where required Interpret engineering drawings and specifications to ensure accurate production Use measuring equipment (micrometers, verniers, gauges) to inspect components Carry out in-process and final inspection to ensure parts meet required standards Achieve required output levels while maintaining quality and efficiency Monitor machine performance and make adjustments as required Maintain accurate and up-to-date records, including work orders and verification of operations Requirements Qualification in Engineering or a related field (desirable) 3 5 years experience in a similar CNC machining role Experience programming, setting, and operating CNC turning machines Ability to read and interpret engineering drawings and specifications Competent in the use of measuring equipment (micrometers, verniers, gauges) If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Job Title: CNC Setter Operator Location: Stroud, Gloucestershire Hours: 07:30 to 16:30 Monday to Thursday, 07:30 to 12:30 Friday Salary: £15.00 to £20.00 per hour DOE Overview Our client is seeking a CNC Setter Operator to join their team in a fast paced manufacturing environment, supporting the efficient production of high quality components. Key Responsibilities of a CNC Setter Operator • Set and operate CNC machines to produce components efficiently and to the required quality standards. • Obtain Quality Control authorisation on the first off components. • Check all components are machined from the correct material. • Ensure all components are processed in accordance with the production layout, raising any discrepancies or required amendments with supervision. • Ensure all components are machined to drawing dimensions and tolerances. • Ensure all processes are performed efficiently and within set cycle times. • Comply with the company s Quality Control procedures at all times. • Comply with the company s Health and Safety policy at all times. • Recommend improvements to methods or processes to enhance quality or efficiency. • Maintain work area and machinery in a clean, tidy and organised condition. • Carry out any other reasonable duties as requested. Key Skills of a CNC Setter Operator • Experience setting and operating CNC machinery. • Ability to read and work from engineering drawings. • Strong attention to detail and quality standards. • Good understanding of manufacturing processes and materials. • Ability to work efficiently and meet production targets. • Awareness of health and safety practices within a machine shop environment. • Proactive approach to problem solving and continuous improvement.

Rolling Mill Operator Setter Wolverhampton £12.71 per hour (Trainee Rate) Up to £14.00 per hour for Experienced Setters Full Time/Temp to Perm Our client, a well established manufacturing company based in Wolverhampton, is currently recruiting for a Rolling Mill Operator/Setter to join their production team. This is an excellent opportunity for someone looking to develop a long term career within manufacturing, with full training available for the right trainee candidate and higher rates offered for experienced setters. Hours of Work: Monday to Thursday: 7:00am to 3:30pm Friday: 7:00am to 12:00pm 37 hours per week Pay Rates: £12.71 per hour for trainee candidates Up to £14.00 per hour for experienced Rolling Mill Setters Key Responsibilities: Setting and operating rolling mill machinery to production specifications Monitoring machine performance and product quality Carrying out machine adjustments and minor troubleshooting Ensuring materials are processed efficiently and safely Completing production documentation accurately Maintaining a clean and organised working area Candidate Requirements: Previous experience in a manufacturing or machine operating environment preferred Experience as a rolling mill setter/operator advantageous but not essential for trainee applicants Strong attention to detail and quality standards Reliable, punctual and able to work as part of a team Willingness to learn and develop new skills Benefits: Temp to perm opportunity with long term prospects Early finish every Friday Training and progression opportunities available Competitive pay rates based on experience To apply, please submit your CV today for immediate consideration.

Bar Saw Operator Location: Milton Keynes Salary : £28,080 per annum Vacancy Type: Permanent - Full Time Your responsibilities The company are currently looking for a Production Operative to join them! As the Production Operative (Bar Saw), you will be cutting a range of rolling product for various customers working from design drawing, adhering to tight tolerances and ensuring their customers receive the most high quality material. At their Milton Keynes site, they process metal bars and tubes in various grades and sizes. They have state-of-the-art cutting facilities, including CNC machining with integrated robotics. Their materials are used in the aerospace, defence and medical sectors. Shift Pattern 40 hours a week Week 1: 6am-2pm Week 2: 2pm-10pm Key Responsibilities Your main duties will include: Operating the Bar Saw to a high quality and safe standard Ensuring they have warehouse traceability Working from drawings you will be required to accurately set various machines and produce parts to order Use forklifts to gather material for the jobs and record all information on job sheets Skills, Knowledge and Expertise Essential experience, skills and knowledge: Saw operating knowledge Able to read drawing and record accurate details Flexibility to help with other tasks Strong communication and time management skills Desirable experience, skills and knowledge: Training can be provided for the right applicant Forklift trained Benefits Annual Leave: 25 days holiday + 8 bank holidays + your birthday Health Cash Plan (after 6 months) Company bonus scheme Advantageous pension scheme Learning & Development opportunities Advanced Family Friendly Policies Employee high street vouchers & discounts Employee Assistance Programme Occupational health & health surveillance Length of Service Awards Christmas savings scheme Eye care vouchers Cycle to Work Scheme Wellbeing events Recognition Portal Rewards Portal Company events Company share schemes Christmas Closedown About the Company The company operates a network of 8 sites with just under 500 employees in England and Northern Ireland which are in; Birmingham, Preston, Darton, Milton Keynes, and two sites in Belfast. They offer a vast range of metal material products such as stainless steel, aluminium and mild steel. They also provide a range of services, whether it be fully welded and fabricated finished parts or bespoke flat products cut to exact sizes. They have years of experience in the aerospace, construction and architecture, automotive and the general engineering industries. To Apply If you feel you are a suitable candidate and would like to work for the company, please click apply.

Job Title: Manufacturing Operator - Monoshell Department Location: Sowton Industrial Estate, Exeter, EX2 Employment Type: Full-Time / Shift-Based Shift Pattern: 3 shift rotation 06:00am-14:00pm / 14:00pm -22:00pm / 22:00pm-06:00am Pay Rate: £16.28p/h Overview: We are seeking a reliable and detail-oriented Manufacturing Operator to join our Monoshell Department at Howmet. This role is vital in supporting the early stages of the casting process, ensuring that all wax components are carefully inspected, coated, and prepared using specialized machinery and slurry processes. You'll work in a small, close-knit team where quality, safety, and consistency are key. Whether you have prior manufacturing experience or transferable skills, we provide the training you need to succeed. Key Responsibilities: Maintain a strong focus on Environmental Health & Safety (EH&S) standards Perform final inspections of wax components before the dipping process Follow precise batch recipes to prepare slurry mixtures used in coating Operate machinery for dipping and processing wax components into slurry Rotate and manage stock through baking and drying phases Conduct test runs, identify and report any machinery faults or process issues Work flexibly within a small team, covering all roles as needed to maintain workflow Follow principles, participating in problem-solving and continuous improvement activities Maintain an organized, clean, and efficient work environment Carry out any other reasonable duties required to support the team and production goals What You Bring: Strong attention to detail and focus on product quality Confidence working with machinery and following technical instructions Ability to follow recipes and processes with accuracy A team-oriented approach with the flexibility to support various roles in the department Willingness to participate in ongoing training and improvement initiatives Prior experience in a manufacturing, chemical, or coating environment is helpful but not required - training will be provided Why Join Us: Be part of a team that values precision, safety, and continuous improvement Hands-on experience in a key stage of advanced manufacturing A supportive environment that encourages cross-training and growth Opportunities to build a long-term career in a specialized technical field

Management Consultant / Bid Writer (Hospitality & Food Strategy) Location: Hastings (office-based initially) Salary: excellent, depending on experience Hours: Monday Friday, 8.30am 5.30pm The Opportunity An ambitious and fast-growing international hospitality consultancy is expanding its team and looking for a commercially minded, data-driven Management Consultant to join them at an exciting stage of growth. This is not an operator role. It s a true consultancy position focused on analysis, insight, strategic thinking and influencing decision-making at senior level. You ll be joining a business with an established global client base, strong leadership, and clear growth plans. The role will evolve as the company grows offering real progression and increasing responsibility over time. What You ll Be Doing This is a data-led consulting role with exposure to both UK and international clients. Your work will typically involve: Analysing operational and financial data to identify trends, risks and opportunities Taking a big picture view of a client s food service operation, then drilling down into the detail to uncover practical solutions Supporting and leading elements of bid and proposal writing for public and private sector opportunities Producing clear, persuasive reports and presentations that enable informed decision-making Supporting procurement tenders and outsourcing reviews Conducting site visits and operational audits Contributing to business development activity and strategic growth You ll work closely with senior leadership and be given meaningful responsibility early on. About You We re looking for someone with 2 3 years experience in management consultancy, commercial analysis, bid write or a similar strategy-focused environment. You ll likely have: A strong academic background (degree educated, ideally in Business, Hospitality, Economics or similar) Experience in a consultancy, advisory, or highly analytical commercial role Strong Excel skills and confidence working with complex datasets The ability to interpret data and translate it into clear, commercially sound recommendations Excellent written communication skills (proposal/report writing experience would be advantageous) A genuine interest in food, catering or hospitality being a self-confessed foodie would absolutely fit Hospitality operational experience alone won t be enough we re specifically looking for someone with consultancy DNA: structured thinking, commercial curiosity, and analytical rigour. Working Arrangement The role is office-based in Hastings initially. To fully understand the business, clients and methodology, you ll be expected to be office-based for the first 3 6 months. There is potential for a more hybrid arrangement longer term as the role develops. National and occasional international travel may be required. Why This Role? Join a consultancy in growth mode Work directly with senior leaders and global clients Build real consulting experience early in your career Be part of shaping the next stage of the business This is ideal for someone early in their consultancy career who wants genuine exposure, autonomy, and progression rather than being one small part of a large corporate machine.

Job Title: Sheet Metal Worker / Fabricator Location: Banham, Norfolk Salary: Starting from £19.00 per hour, negotiable depending on experience Job Type: Permanent, Full Time Hours: 40hr week (Monday to Friday) + time and a half overtime About us: Based in the heart of Banham, Norfolk, Full Circle Enterprises Ltd is a trusted name in vehicle care and accident repair. Founded in 2000 we have spent over 25 years building a reputation for quality, precision, and a personal touch that sets us apart. We're currently looking for an experienced Sheet Metal Worker / Fabricator to join our close-knit team in Banham, Norfolk About the role: Because of the bespoke nature of our business we're looking for someone who has a flexible approach to tasks but ideally you'll have experience of the following: Mig & Tig Welding in both Steel & Aluminium Using various machinery such as Brake press & Guillotine Fabricate from pattern/bespoke vehicle parts/panels Corrosion repairs to framework in situ Our team is very collaborative in the way they work so candidates must be able to work as part of a team in a busy workshop environment & use their own initiative. You will need to have access to your own vehicle as there's currently no public transport access to the site. What we offer: Excellent working environment Ongoing training provided We are a proud equal opportunities employer Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Welder Fabricator, Coachbuilder, Panel Beater, MIG & TIG Welder, Aluminium Welding, Classic Car Restoration, Motorsport Fabricator, Body Shop Technician, Press Brake Operator, Bespoke Fabrication, Thin Gauge Welding, Panel Fabrication, Pattern Development, Custom Bodywork, and Structural Repair Technician also be considered for this role.

Precision-Made Careers Start Here - Forge Ahead with Howmet! Job Title: Manufacturing Operative - Finishing Department Location: Sowton Industrial Estate, Exeter, EX2 Employment Type: Full-Time Monday to Friday Shift Pattern: 2 shift rotation 06:00am-14:00pm / 14:00pm-22:00pm Pay Rate: £15.93 per hour Are You Detail-Driven with a Passion for Quality? Join Howmet Aerospace , a global leader in precision-engineered solutions, where your craftsmanship helps power the future. We're looking for a Manufacturing Operator to join our Finishing Department - the final and critical stage before our products go to customers worldwide. This is your chance to work hands-on with high-performance components, ensure flawless finishing, and be part of a tight-knit team that takes pride in every product. What You'll Do: Polish, deburr, and clean precision components using hand tools and machines Inspect final products with a keen eye to ensure they meet exacting quality standards Check against customer specs and internal criteria for flawless delivery Maintain a clean, safe workspace in line with EH&S practices Work collaboratively in a flexible, multi-skilled team Prepare components for final dispatch , ensuring top-tier presentation What We're Looking For: A strong eye for detail and pride in precision work Some experience with surface finishing or polishing tools is a plus - full training provided Ability to follow technical instructions and meet exact standards A proactive, hands-on approach to work and solving problems A team player who's reliable, adaptable, and eager to learn Interest in safety and continuous improvement Why Join Howmet? Be part of a company where craftsmanship and quality are valued Get training and development in specialist finishing techniques Work in a safe, supportive, and team-oriented environment Contribute to ongoing innovation and process improvements Build a career in an industry where your precision makes a difference Your next chapter in manufacturing excellence starts here. Apply today and help us shape the future - one polished part at a time. Please note that this role may be subject to export control restrictions, including under ITAR. Any offer of employment will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology.

Precision-Made Careers Start Here - Forge Ahead with Howmet! Job Title: Wax Department - Manufacturing Operator Location: Sowton Industrial Estate, Exeter, EX2 Employment Type: Full-Time Shift-Based Shift Pattern: 2 shift rotation, Monday to Friday (week 1 06:00am-14:00pm / week 2 14:00pm-22:00pm) Pay Rate: £15.93 per hour Your Work, Our Flight At Howmet Aerospace , everything starts with precision - and in the Wax Department , you'll be part of the foundation that makes advanced casting possible. From delicate wax components to flawless patterns, your steady hands and sharp eyes will help shape parts that fly, rotate, and power our world. Whether you're experienced in manufacturing or new to the field, we'll provide training and support to help you succeed. What You'll Do Perform fine finishing and detailing of wax components with steady hands and precision tools Handle delicate parts with extreme care to preserve pattern integrity Follow technical drawings and instructions to meet exact engineering specifications Conduct quality control inspections , flagging any defects or inconsistencies Set, load, and prepare components for downstream processes Maintain a clean, organised workspace to support production flow and casting schedules Adhere to all Environmental Health & Safety (EH&S) standards Collaborate with your team to keep work moving smoothly and efficiently Pitch in with other tasks when needed - teamwork makes it happen What You Bring A steady hand and sharp eye - confident working with fragile, detailed components Ability to read and interpret technical documentation Pride in delivering high-quality, accurate work Strong communication skills and a collaborative attitude Willingness to learn and grow in a safety-first industrial environment Experience in wax and casting is helpful - but not required (training provided) Why You'll Love This Role Be part of a team that values precision, skill, and attention to detail Hands-on experience in an essential stage of high-performance casting Learn specialised tools and techniques used across advanced manufacturing Enjoy a clean, structured environment where safety and quality come first Grow your skills with ongoing development and support Specialised Roles Within the Wax Department Wax Injection Operator - High-Value Precision Pressing Summary: Operate wax injection presses to produce critical, high-quality patterns using precision tooling for aerospace and engineering applications. Key Responsibilities: Run wax injection presses to exact specifications Protect and maintain high-value tooling Follow detailed technical instructions and production documents Work efficiently to meet daily production goals without sacrificing quality Record outputs and flag any process issues or defects Keep workstations safe, clean, and organized Inspect each wax pattern carefully for structural integrity What You'll Need: Strong manual dexterity and mechanical awareness Confidence using industrial machinery in a high-standards setting Careful handling of expensive tools and small components Basic understanding of equipment care and safety procedures Ability to stay focused and meet deadlines in a fast-moving environment Physical Requirements: Sit for extended periods, perform repetitive tasks Safely lift and handle materials up to 10kg Comfortable working with hot wax and machinery Wax Cell Operator - Hand Finishing & Repair Specialist Summary: Use your fine motor skills and eye for detail to finish, refine, and inspect intricate wax patterns - ensuring each one meets the highest possible standard. Key Responsibilities: Finish and refine wax patterns with hand tools and sharp instruments Detect and repair subtle surface defects using precision techniques Follow work instructions meticulously Record data and report deviations to shift leads Use small, sharp tools like tweezers, brushes, dental picks Maintain a fast, steady rhythm while protecting fragile components Keep your area safe, clean, and ready for action What You'll Need: Excellent hand-eye coordination and patience Experience with detailed handcraft work (e.g. electronics, jewellery, or model-making) is a plus Familiarity with small tools and warm materials Ability to work solo or in a team in a production setting Focus on quality and responsibility in every pattern you handle Physical Requirements: Sit or stand for extended periods Perform repetitive and precise tasks Safely handle wax and tools in a controlled environment Lift items up to 10kg as needed Ready to Join Howmet? From your hands to the skies - your attention to detail in the Wax Department plays a key role in creating parts that power aerospace and energy solutions around the globe. If you're ready to work with purpose, precision, and pride, apply now and grow your career with Howmet Aerospace . Please note that this role may be subject to export control restrictions, including under ITAR. Any offer of employment will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology.