3352 jobs found

Fire & Security Engineer - Job Description Job Title: Fire & Security Engineer Location: Hull/Humber Salary: 34-36K Job Type: Full-Time / Permanent Overview We are seeking an experienced and motivated Fire & Security Engineer to join our clients growing team. The successful candidate will be responsible for the installation, servicing, maintenance, fault finding, and commissioning of a wide range of fire alarm, intruder alarm, CCTV, and access control systems across commercial and residential sites. The ideal candidate will have strong technical knowledge of multiple fire alarm panels and security systems, excellent fault-finding abilities, and a customer-focused attitude. Key Responsibilities Installation, servicing, maintenance, and commissioning of fire and security systems Diagnosing and repairing faults efficiently Conducting routine preventative maintenance visits Completing all documentation and service reports accurately Providing technical support to customers on-site Ensuring all works comply with current industry standards and health & safety regulations Participating in out-of-hours call-out rota when required Maintaining high levels of customer service and professionalism Required Skills & Experience Fire Alarm Systems Experience Strong knowledge and hands-on experience with multiple fire alarm panels including: Advanced Electronics Kentec Morley C-Tec Apollo Hochiki Gent Notifier Siemens Protec Hyfire Ziton Intruder Alarm Systems Experience Experience with installation and servicing of: Texecom Galaxy Pyronix Hikvision AX Pro Scantronic Honeywell Risco Orisec Additional Security Systems Experience with: CCTV systems (Hikvision, Dahua, Hanwha) Access control systems (Paxton, Hikvision, ACT) Emergency lighting testing Networking/IP-based systems Essential Requirements Previous experience as a Fire & Security Engineer 8+ years Full UK driving licence Strong fault-finding and diagnostic skills Good understanding of BS5839 and relevant fire/security standards Ability to work independently and as part of a team Excellent communication and customer service skills ECS/CSCS card preferred FIA qualifications advantageous Benefits Company vehicle Van Mobile phone and tablet Overtime opportunities Pension scheme Training and development Death in service Ideal Candidate The ideal candidate will be reliable, technically competent, and capable of managing their workload effectively while maintaining high standards of workmanship and customer care.

Fire & Security Engineer - Job Description Job Title: Fire & Security Engineer Location: North West Salary: 36-38K Job Type: Full-Time / Permanent Overview We are seeking an experienced and motivated Fire & Security Engineer to join our clients growing team. The successful candidate will be responsible for the installation, servicing, maintenance, fault finding, and commissioning of a wide range of fire alarm, intruder alarm, CCTV, and access control systems across commercial and residential sites. The ideal candidate will have strong technical knowledge of multiple fire alarm panels and security systems, excellent fault-finding abilities, and a customer-focused attitude. Key Responsibilities Installation, servicing, maintenance, and commissioning of fire and security systems Diagnosing and repairing faults efficiently Conducting routine preventative maintenance visits Completing all documentation and service reports accurately Providing technical support to customers on-site Ensuring all works comply with current industry standards and health & safety regulations Participating in out-of-hours call-out rota when required Maintaining high levels of customer service and professionalism Required Skills & Experience: Fire Alarm Systems Experience Strong knowledge and hands-on experience with multiple fire alarm panels including: Advanced Electronics Kentec Morley C-Tec Apollo Hochiki Gent Notifier Siemens Protec Hyfire Ziton Intruder Alarm Systems Experience Experience with installation and servicing of: Texecom Galaxy Pyronix Hikvision AX Pro Scantronic Honeywell Risco Orisec Additional Security Systems Experience with: CCTV systems (Hikvision, Dahua, Hanwha) Access control systems (Paxton, Hikvision, ACT) Emergency lighting testing Networking/IP-based systems Essential Requirements Previous experience as a Fire & Security Engineer 8+ years Full UK driving licence Strong fault-finding and diagnostic skills Good understanding of BS5839 and relevant fire/security standards Ability to work independently and as part of a team Excellent communication and customer service skills ECS/CSCS card preferred FIA qualifications advantageous Benefits Company vehicle Van Mobile phone and tablet Overtime opportunities Pension scheme Training and development Death in service Ideal Candidate The ideal candidate will be reliable, technically competent, and capable of managing their workload effectively while maintaining high standards of workmanship and customer care.

Control Systems Engineer Woodford Green up to 70k As a Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA, HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Essential experience Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLCs like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience)

TV/Satellite Installation Engineer - Salary + Bonus + Car/Fuel card + Heathcare + 25 days holiday This role involves supporting the installation, maintenance, design, and commissioning of communal television systems across Bristol. Working as part of a multi-site engineering team, you will play a key role in delivering high-quality Integrated Reception Systems (IRS) while providing technical support and advice to both clients and internal management teams. You will assist with property surveys, system planning, installations, and testing activities across a range of residential and commercial sites. The role includes working with aerial, satellite, and associated electronic equipment to ensure optimum signal strength, system performance, and customer satisfaction. The successful candidate will be responsible for fault finding, diagnosing technical issues, and ensuring systems are installed and commissioned to the highest standards. You will also maintain accurate technical records, participate in stock checks, and ensure all work is completed in line with health and safety regulations. This is an excellent opportunity for someone with a strong interest in broadcast and reception technologies who enjoys hands-on technical work and delivering excellent service as part of a professional team. Key Responsibilities Assist with the design, installation, commissioning, and maintenance of Integrated Reception Systems (IRS) Carry out property surveys and support project planning activities Install, test, and maintain aerial, satellite, and associated electronic equipment Diagnose faults and carry out repairs to ensure systems operate efficiently Monitor and record signal levels in line with company procedures Ensure all installations meet quality, technical, and safety standards Provide technical guidance and support to colleagues and management when required Maintain accurate job records and participate in weekly stock checks Follow all health and safety procedures and company policies Participate in ongoing training and development programmes What You ll Bring Experience working with communal television or Integrated Reception Systems Knowledge of aerial, satellite, and signal distribution equipment Strong fault-finding and diagnostic skills Experience commissioning and testing electronic systems Ability to accurately record signal readings and technical information Good understanding of health and safety requirements within an engineering environment Strong organisational skills with the ability to work independently and manage workload effectively Confidence when surveying properties and communicating with clients Ability to explain technical information clearly and professionally A willingness to learn, develop new skills, and participate in further training A reliable, detail-oriented, and team-focused approach to work If you are passionate about technology, enjoy problem-solving, and want to be part of a team delivering high-quality media system solutions across Bristol, we would like to hear from you.

Job Title: Maintenance Engineer Location: Chadderton Salary: £54,000 - £58,000 Shift: Nights Job Role: As a Maintenance Engineer, you will play a key role in ensuring the smooth running of a fast-paced FMCG production environment. The Maintenance Engineer will be responsible for both reactive and planned maintenance across a range of production and packaging machinery. The successful Maintenance Engineer will work to minimise downtime, improve equipment reliability, and support continuous improvement initiatives across the site. Sector: FMCG / Manufacturing Non-Negotiable Requirements for the Maintenance Engineer Must be apprentice trained Strong electrical and/or mechanical maintenance background Experience working in a fast-paced manufacturing environment Ability to work permanent night shifts Requirements for the Maintenance Engineer Experience with planned and reactive maintenance Strong fault-finding and diagnostic skills Ability to work on a range of automated machinery Good understanding of health and safety practices Ability to work independently and as part of a team Desirable Requirements for the Maintenance Engineer HNC qualified (or working towards) Previous experience within an FMCG environment Experience with PLC fault finding Continuous improvement experience Benefits: Salary between £54,000 - £58,000 Permanent night shift premium Pension scheme Training and development opportunities Stable and growing business If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details, contact Joe McAuliffe at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Multi-Skilled Engineer Location: Rugby Salary: 56,408+ 5% bonus Shifts: 4 on 4 off (Days & Nights, 7am-7pm / 7pm-7am) Contract: Permanent, Full-Time, 42 hours per week Start: ASAP The Role: We are seeking experienced Multi-Skilled Engineers to ensure maximum equipment availability and reliability across a large-scale food & beverage production site. You will be responsible for reactive and preventative maintenance, site utilities, and driving continuous improvement to support performance, safety, and quality standards. Key Responsibilities: Attend breakdowns, diagnose faults, and carry out effective repairs. Perform planned and preventative maintenance across production and utilities. Ensure full compliance with Health, Safety, Environmental and Quality standards. Support shutdowns, inspections, and capital engineering projects. Apply Lean principles (TPM, RCM, RCA, 5S, PDCA) to drive reliability and efficiency. Work collaboratively within engineering and production teams, coaching and supporting colleagues. Requirements: NVQ Level 3 (or equivalent) in a relevant engineering discipline. Strong multi-skilled background with an electrical bias. Experience in FMCG / manufacturing environments. Knowledge of PUWER, Electricity at Work, COSHH, and related regulations. Excellent problem-solving and teamwork skills. Benefits: Monthly product allowance (alcoholic & non-alcoholic options). Private medical options. Life assurance & enhanced pension contribution. 5% company bonus scheme. 24/7 GP services. Generous holiday allowance (inc. bank holidays). High street discounts.

An established Regional Building Services Installation and Maintenance service provider Job Details Air Conditioning / Refrigeration Engineer to carry out fault finding and PPM of all Refrigeration, Chiller, Air conditioning and ventilation equipment associated with the buildings within a Government Defence establishment contract in the Hereford area predominantly (occasional travel to Brecon). To undertake the day to day operation, planned maintenance, fault finding and repair of the complete spectrum of services found in a building associated with Ventilation and Air Conditioning, including split and multi split systems, refrigerated systems and cold room repairs. To ensure that planned preventative maintenance and associated work reactive works are implemented efficiently to specified requirements. To clearly identify and record concise details when rectifying break-downs and further action required to eliminate or minimise future problems. Ensuring that these records are kept up to date at all times. To communicate all necessary information regarding breakdown problems, alteration to planned preventative maintenance and technical information. HEALTH & SAFETY : To ensure all relevant Health and Safety, COSHH and Permit to Work Regulations are adhered to Report any deficiency in Health and Safety systems or documentation to own Line Manager or Manager of area concerned. Actively report all incidents and near misses in accordance with policies and procedures. Essential City and Guilds Level 3 in Ventilation and Air Conditioning City and Guilds F-Gas Certificate desirable Basic competence in Electrical and Controls systems associated with Mechanical Services. Able to diagnose faults and put forward and complete appropriate rectification measures Able to establish necessary parts/plant/materials necessary for completion of tasks Take part in out of hours duty roster/on call Pass SC and basic security checks Hold a valid UK driving licence Desirable Experience of working in a Commercial or Military environment If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. Vital Human Resources is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of their age, disability, gender reassignment, marriage/civil partnership, pregnancy/maternity, race, religion/belief, sex or sexual orientation. Salary: £40 - £42K Basic Hours: Standard 40 hrs per week Benefits: Pension, Fully Expensed Vehicle, Fuel Card, Overtime & On Call allowance

SG Personnel are working with a market leading manufacturing/engineering business who are looking to recruit a Skilled Maintenance Technician on a permanent basis. Key Accountabilties / Responsibilties: Maintenance & Reliability Maintain, repair and replace plant, equipment, buildings and utilities safely and compliantly. Deliver planned preventative maintenance (PPM) to schedule and diagnose mechanical and electrical faults, implementing effective corrective actions. Ensure equipment meets defined performance standards and escalate non-conformance as required. Complete maintenance records accurately and on time to meet Health & Safety, insurance and ISO requirements. Continuous Improvement & GPS Participate in Grundfos Production System (GPS) activities, including 5S, preventative maintenance and Kaizen. Identify and implement improvements to equipment reliability, safety and process performance. Systems, Communication & Ways of Working Use SAP PM / Nuvolo to manage work orders, time recording and reporting. Communicate effectively with other functions and management to minimise disruption. Plan and prioritise work to support production requirements and agreed timescales. Apprentices & Capability Development Train, coach and support apprentices to develop technical competence and safe working practices. Liaise with supervisors, department heads and HR on training needs and skills development. Contractors & Compliance Coordinate and supervise external contractors on site. Ensure RAMS, permits to work and control measures are in place and followed. Comply with LOTO and Permit to Work procedures. Additional Responsibilities Install, relocate or disconnect plant and equipment as required. Undertake other reasonable duties aligned with the role and terms of employment. The salary ranges from 42,839 to 44,755 depending upon experience.

CNC Setter / Operator Advanced Engineering Are you an experienced CNC Setter/Operator looking to develop your career within a high-performance precision engineering environment? ASL Technical are recruiting on behalf of a leading Advanced Engineering business operating at the forefront of precision manufacturing. This is an excellent opportunity for skilled machinists who take pride in producing high-quality components and want to progress their careers with genuine development opportunities into Team Leader level for the right candidates. The Opportunity You will be working within a modern CNC machining environment producing high-precision components to tight tolerances for demanding customers across multiple sectors. This is a hands-on role suited to experienced machinists who are confident setting and operating CNC machines and are motivated by quality, efficiency and continuous improvement. Key Responsibilities Machine Setup & Operation Set and configure CNC machines in line with engineering drawings and specifications Select and install appropriate tooling and work holding Load and verify NC programs, offsets and tool geometries Quality Assurance & Process Control Inspect finished components to ensure compliance with drawings Identify and report programming or machining issues Monitor machining processes and address tool wear or dimensional variation Teamwork & Development Work collaboratively with engineering, quality and maintenance teams Support and mentor apprentices or junior machinists where required Opportunity to progress into Team Leader responsibilities for suitable candidates Skills & Experience Required Proven experience as a CNC Setter/Operator or similar machining role Strong understanding of CNC machining processes and tooling Strong commitment to safety, quality and continuous improvement What s On Offer 4.5 day working week 5 weeks annual leave plus bank holidays Loyalty length of service scheme Pension scheme Private medical insurance Onsite gym facilities EV company car scheme Structured environment within an ISO9001 quality system Genuine career progression opportunities, including Team Leader development pathways If you are an experienced CNC machinist looking to take the next step in your career within a high-performance engineering environment, we would like to hear from you. Apply today through ASL Technical.

Job Description Life Cycle Engineer - Combat Full time Bristol / Hybrid - 3 days on site per week An excellent opportunity has arisen for an enthusiastic Life Cycle Engineer to join the UK & I Mature Programmes Life Cycle Engineering - Combat Team. As a Life Cycle Engineer, you will be primarily responsible for providing in-service technical support to the product to ensure their safe, reliable and disruption free operation. You will also influence maturity across the product life cycle to meet customer and business needs. This highly challenging and interesting role provides opportunities for ownership of customer operational issues and to act as the customer technical interface. It requires balancing the needs and expectations of the customer with the demands of our business. You will work closely with specialist engineering areas such as Stress, Critical Parts Lifing, Safety and Reliability, Performance and Controls gaining an insight into the operation of these disciplines. You'll be the Customer Engineering interface, working with Operators, Partners, Airframer, Regulatory Authorities and Maintenance, Repair & Overhaul facilities to provide product technical support for the in-service operation. This will typically include: Management of known and potential safety issues (Safety Alert Report & Red Top). Identify, investigate and resolve in-service technical issues (e.g. queries and operational arisings), lead the investigation of operational issues to establish root cause and introduce containment / corrective actions as required. Prepare and deliver technical communications (e.g. presentation and/or reports) to platform provider, regulators, customers and internal stakeholders. This includes developing and approving the technical content of publications / communications including acceptance limit development. Manage any issues that affect the Maturity, Lifecycle Cost, Reliability and Maintainability and maintain Design Intent. This includes identifying cost reduction opportunities by reviewing and maintaining life cycle engineering policies and any associated maintenance planning documentation. Ensure compliance with requirements specified by regulatory authorities and to adhere to technical and business requirements of internal & external stakeholders. You will also be able to influence new product design with in-service experience and develop support strategies across the product lifecycle to suit customer and business requirements. We'll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career. Work with us and we'll welcome you into a culture of caring and belonging where you can be yourself. We will listen first, embrace feedback and act with integrity. We will invest in your continuous learning and development, and make sure you have access to a wide breadth and depth of opportunities to grow your career and make a difference. We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, frequency will depend on business needs, nature of role, what works for the team and for the individual. Who we're looking for Being a part of Rolls-Royce you'll know we put safety first, do the right thing, keep it simple and make a difference. These principles form our behaviours. They are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Educated to degree level in a STEM subject and/or have experience in a relevant engineering environment (Mechanical, Aeronautical, Electrical or Controls). Other qualifications, in combination with relevant experience, may also be considered. A broad understanding of Gas Turbine physical and functional characteristics, as well as familiarity of the in-service operation environment (e.g. direct product experience and knowledge of regulatory / compliance requirements) would be advantageous, but training will be provided to develop this. Candidates should be highly numerate with strong technical and analytical skills, problem-solving ability and capable of systems level thinking, including personal drive, excellent communication and presentation skills, and will need to contribute effectively in a team environment. You will be able to demonstrate a high level of customer focus as well as good business awareness and clear understanding of process improvement principles, taking the lead in investigations, supporting / leading cross-functional teams (e.g. specialists, suppliers, customers, partners), and specifying / executing packages of work. The role requires personal commitment with opportunities to travel both in the UK and overseas, sometimes at short notice and for extended periods to meet the business needs. Join us in Life Cycle Engineering and help Rolls-Royce to become a high-performing, competitive, resilient business. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. Learn more about our global Inclusion Strategy As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Engineering for Services Posting Date 09 Jun 2026; 00:06 Posting End Date 22 Jun 2026PandoLogic.

What Are We Looking For Following continued success, our Treatment Solutions team in Muir of Ord are looking for a Production Project Engineer with a keen interest in project delivery to join us on a permanent basis. You will be responsible for the delivery of projects and manage the performance of projects end-to-end, whilst working with our internal stakeholders to ensure client needs are met. This position would ideally suit someone with the ambition to take on challenges and deliver results, with the support of an experienced team. You ll be afforded the opportunity to be at the forefront of engaging with clients for our various frameworks, as well as benefit from access to an in-house design team to provide technical solutions in real-time. Some Of Your Key Duties Include: Project liaison from enquiry stage to final acceptance and documentation, meeting with Clients as required to discuss specific requirements and carry out site surveys as required. Instructing, directing, controlling and allocating work to Trade Operatives & Apprentices, with attention to quality, productivity and safety. Ensure all technical information is available when required for the delivery of design and/or construction. Interpret and check drawings, specifications and schedules for all activities, directing works accordingly & prepare final documentation (As Built Drawings etc.). Early Identification and resolution of non-conformance within both the design and construction phase Manage the design of systems and products, ensuring alignment with design specifications and technical aspects. Completion of contract documents Management of Project Quality deliverables and procedures ensuring compliance with Internal and Client Quality Systems. Input to Tender, design and construction programmes including progress updates and reporting. Subcontractor liaison, management including tender specification, quotation and H&S documentation review and appraisal. Preparation of Construction Phase Health and Safety Plans for projects with Principal Contractor responsibility under CDM. What Do You Need? Qualification to degree / HND/ HNC in Engineering Systems. Good time management, with the ability to multitask, plan and organise day to day workloads within a busy environment. Good communication skills in both verbal and written communication and ability to follow, interpret and explain technical instructions. Knowledge of the tools, equipment, and materials common to all engineering trades, particularly Mechanical, Electrical and Civil Engineering. Driven, with an ability to work individually and with teams under your direction. Innovative thinking, with and ability to learn, understand, and apply new technologies. Ability to effectively prioritise and execute tasks in a high-pressure environment. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.

Catch 22 are working with a leading student accommodation provider to recruit a Building Maintenance Officer to support a multi-site portfolio across Birmingham and Coventry. This role could be ideal for a multi-skilled engineer looking to step into a more administrative, coordination, and technical support-led position, while still utilising a strong hands-on background. Key responsibilities; Coordination of planned and reactive building services works Support across electrical systems, power distribution, lighting, fire alarms, and BMS controls Involvement in HVAC, heating, plumbing, ventilation, and gas systems Review of contractor works, RAMS, and compliance documentation Technical reporting, asset management support, and maintenance planning Liaising with internal teams and external contractors across multiple sites Perform some basic fix repairs and maintenance Ideal Candidate: Experience in operations support, office administration, or facilities management with a strong focus on compliance. Hands on, trade background (e.g. electrical, mechanical, HVAC, or similar) with the ability to carry out reactive maintenance when required. Strong organisational skills and excellent attention to detail. Proactive and able to anticipate requirements from stakeholders. Experience using facilities management systems. Knowledge of health & safety regulations, CDM, and statutory compliance. Electrical and/or mechanical qualifications (Desirable) Driving licence and ability to travel between sites Role details £38k-£45k Excellent benefits inc extended family leave, 25 days holiday + BH & 5-11% pension scheme Permanent, full time contract, Mon-Fri (No on call) Occasional work from home Excellent opportunities for progressional support If interested in this position, please apply to show your interest.

Job Description Manufacturing Services Engineer Full time Bristol An excellent opportunity has arisen for a Manufacturing Services Engineer to join our team in Bristol to co-ordinate the key maintenance activities within our facility. You will provide support to the Manufacturing Services Manager and take responsibility for coordinating, at plant or cell level, the Manufacturing Services organisations service lines, ensuring all aspects of external Service Provider partnerships are delivered and monitored in line with business requirements. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you will be doing: Work closely with the designated Manufacturing Services Leader (Production Leader) in order to deliver the Manufacturing Services objectives providing data analysis and identifying opportunities to improve performance. Be responsible for the co-ordination & safety of contractors in the facility. Ensure equipment and facility maintenance requirements are planned and scheduled. Proactive response to unplanned issues with plant and equipment. Coordinate designated aspects of external Service Provider partnerships delivered by Manufacturing Services, in line with business requirements and company standards. Support implementation of the company Health & Safety Standards which may include taking the role of Responsible Person (RP) or Assistant RP for specified activities. Develop and implement Energy Management plans, strategies and initiatives for Manufacturing Services at cell and plant level. Be the business's interface for Group Property's Integrated Facilities Supplier monitoring their performance against identified business requirements. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Has had experience in functional support groups. Has a proven track record delivering business results. Has had experience of managing and coordinating external Service Providers. Good communicator. Maintenance qualification; preferably within electrical or mechanical qualification. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Closing date: 17th June 2026 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Manufacturing Services Posting Date 03 Jun 2026; 00:06 Posting End Date 17 Jun 2026PandoLogic.

Location: Sutton In Ashfield Commutable from: Nottingham, Eastwood, Ilkeston, Mansfield, Kirkby-in-Ashfield and surrounding areas Salary: Up to 32,200 per year DOE Hours: Monday to Friday Days Why Apply? Salary up to 32,200 per year depending on experience 4.5 day working week with Friday afternoons off Flexible start and finish times BUPA Private Medical Care Employee Assistance Programme Service-related annual leave increasing up to 24-26 days plus Bank Holidays Holiday buy scheme Cycle to work scheme Company sick pay Death in service benefit Excellent career development opportunities Stable workload with a well-established manufacturer Opportunity to work with modern CNC plasma cutting equipment Supportive and experienced engineering team Overtime available About the Company Our client is a successful fabrication and manufacturing business supplying high-quality metal components to a range of industries. Due to continued growth and increasing customer demand, they are looking to strengthen their production team with an experienced CNC Plasma Operator. The Role This is more than a standard machine operating position. You'll play a key role in the fabrication process, taking responsibility for producing precision-cut components while maintaining high quality and production standards. Working within a busy manufacturing environment, you'll be involved in operating CNC plasma cutting machinery, quality checking finished parts, and supporting wider fabrication activities across the workshop. Key Responsibilities Set and operate CNC plasma cutting machinery Read and interpret engineering drawings Load and unload sheet metal and fabrication materials Monitor machine performance and make adjustments where required Carry out first-off and in-process quality checks Perform basic machine maintenance and fault finding Support fabrication and assembly activities when required Ensure production targets are achieved safely and efficiently Maintain high housekeeping and health & safety standards About You We would like to hear from candidates with experience in: CNC plasma, laser, punch or profile cutting operations Fabrication, welding or sheet metal manufacturing Reading and working from engineering drawings Quality inspection and dimensional checking Manufacturing or engineering environments You will be a reliable, hands-on individual who enjoys working within a fast-paced workshop and takes pride in producing quality work. How to Apply To apply for the CNC Plasma Operator position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps.

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to 48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham

What Are We Looking For? Our Mechanical Trades team is looking for a Fabricator to join our Muir of Ord facility on a permanent basis. You ll work alongside an established team and be required to fabricate and form pipework and manifolds through the safe use of hand tools, machinery, and other equipment. Some of Your Key Duties Include: Fabricate components from customer samples and/or engineer s drawings to client specifications Undertake maintenance/repair work on existing systems Lay out, assemble, fabricate, maintain, troubleshoot and repair piping systems carrying water, steam, chemicals and fuel in heating, cooling, lubricating and other process piping systems Inspect materials and parts to ensure high standards maintained Safe use of hand tools, machinery and other equipment Assist other disciplines when required Carry out all other tasks as requested within the post holder s appropriate skill set What Do You Need? SVQ OR City and Guilds Qualified in a relevant trade Possess general fabrication/pipework knowledge and experience The ability to understand and reproduce components from engineering drawings and/or customer samples To be organised and have the ability to plan a sequence of events, which are required to fabricate a component from start to finish Capable of self-checking work and to possess high personal standards with respect to Environment, Quality and Health & Safety Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading rate of £22.55p/h with overtime available at an enhanced rate. Private Healthcare (Personal). A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply no

Digital Marketing Sales & Social Media Executive Horsham, West Sussex (with occasional travel) The Company A leading UK manufacturer, who design, install and maintain specialist systems for buses, coaches, HGVs and industrial vehicles across the UK and overseas. Due to continued growth, they are looking for an ambitious and motivated Social Media Marketing & Sales Executive to help expand their customer base, strengthen brand presence and generate new business opportunities. The Role Focused on Marketing activity, including social media design & delivery and digital marketing, you will also support the sales function following up web leads, etc. This is a exciting opportunity for someone who enjoys both marketing and sales within a technical industrial environment. You will play a key role in promoting our products and services, generating leads, managing customer relationships, and supporting business growth across multiple sectors. The role combines digital marketing, business development, potential account management and customer engagement. Key Responsibilities Marketing Responsibilities Manage and update company social media platforms and website content Create marketing campaigns, brochures, email newsletters, and promotional materials Maintain company website (Squarespace) Assist with SEO, digital advertising, and online lead generation Coordinate case studies, project showcases, and customer testimonials Monitor marketing performance and provide regular reports Help strengthen the brand within the commercial vehicle and transport sectors Sales Responsibilities Identify and develop new business opportunities within transport, logistics, industrial and fleet sectors Follow up inbound enquiries and convert leads into sales opportunities Build and maintain strong relationships with new and existing clients Arrange and attend industry exhibitions Prepare sales presentations Work closely with management to ensure we achieve sales targets and business objectives Requirements Essential Previous experience in marketing Knowledge of digital marketing, SEO, Google Ads, web design and social media marketing Excellent communication and interpersonal skills Familiarity with LinkedIn marketing and content creation Strong organisational skills and attention to detail Confidence using Microsoft Office and CRM systems Self-motivated with the ability to work independently Website maintenance and design experience ideally with Squarespace Full UK driving licence Desirable Business development experience Experience working with transport, engineering, automotive, or fleet industries Remuneration & Benefits Based within our Horsham offices, the role will require some occasional travel to create content. 8.30-5. Competitive salary Career progression within a growing specialist company Training and ongoing support Company pension Company phone/laptop Private health care upon completion of probationary period 25 days annual leave + Bank Holidays If you are an experienced in sales & marketing, digital & social media marketing, then please reach out to us at startMonday now.

We're looking for a Mobile Plumbing & Fabric Maintenance Engineer to join our EKFB team based in Rushden. Location: Rushden, Northamptonshire Hours: Monday Friday 08:00 to 17:00 We are unable to offer certificates of sponsorship to any candidates in this role Join our talented team as a Mobile Plumbing & Fabric Maintenance Engineer working on the prestigious HS2 project click apply for full job details

Fire Door Inspector & Maintenance Engineer Location: UK - wide (Company van & tools provided) Employer: Fire Door Specialists Ltd, part of The Ranger Group Salary: £38,000, rising to £40,000 after 6 months based on performance Qualification: FDIS desirable This is the role for someone who wants to be at the frontline of life - safety, technical excellence, and industry leadership click apply for full job details

Overview We are seeking an experienced Oracle Database 19c Developer / Application Maintenance Engineer to support and enhance bespoke applications built on Oracle technologies. This role focuses on maintaining and improving existing systems, resolving production issues, implementing enhancements, and ensuring the stability and performance of Oracle-based business applications. The ideal candidate will have strong hands-on expertise in Oracle Database 19c, PL/SQL, and application maintenance, along with experience supporting and developing solutions using Oracle Forms & Reports, Oracle WebLogic, Oracle APEX, and reporting tools such as Crystal Reports. Responsibilities Oracle Database Development & Maintenance Develop, maintain, and enhance PL/SQL packages, procedures, functions, triggers, and database scripts in Oracle 19c. Write and optimize complex SQL queries to support application functionality and reporting requirements. Perform database object maintenance including tables, views, indexes, sequences, and constraints. Support data fixes, data migration, and data validation activities in production and non-production environments. Ensure database code aligns with best practices, performance standards, and security guidelines. Application Maintenance & Production Support Provide day-to-day support and maintenance for Oracle-based applications across multiple environments. Troubleshoot and resolve application incidents related to database logic, Oracle Forms, Reports, and WebLogic deployments. Conduct root cause analysis for recurring issues and implement permanent fixes. Support batch processes, scheduled jobs, and integration feeds to ensure business continuity. Work closely with business users to analyse defects and translate requirements into system enhancements. Oracle Forms & Reports Development Maintain and enhance legacy Oracle Forms and Oracle Reports applications. Debug and modify Forms triggers, procedures, and Reports logic. Support migration efforts, patching, and modernization initiatives involving Oracle Forms/Reports systems. Oracle APEX Development Develop, enhance, and maintain Oracle APEX applications. Create interactive reports, dashboards, and forms using APEX components. Integrate APEX applications with existing Oracle database objects and PL/SQL APIs. Support user access, authentication, and role-based security in APEX. WebLogic Server Administration & Support Support deployment and maintenance of Oracle applications hosted on Oracle WebLogic Server . Assist in troubleshooting WebLogic-related issues such as application availability, performance, configuration, and connectivity. Coordinate deployments and configuration changes across development, test, and production environments. Reporting & Business Intelligence Support Develop and maintain reports using Crystal Reports to support business reporting needs. Analyse reporting requirements and ensure accurate data extraction from Oracle databases. Maintain existing reporting solutions and implement enhancements for improved performance and usability. Performance Tuning & Optimization Identify and resolve database performance issues using tools such as AWR, ADDM, SQL Trace, and Explain Plan . Improve performance through indexing strategies, query optimization, and code refactoring. Assist with database monitoring, performance baselines, and capacity planning. Documentation & Change Management Document technical designs, support procedures, fixes, and enhancements. Support release management activities including deployment planning, scripting, and production validation. Ensure compliance with change control processes and audit requirements. Qualifications Bachelor's degree in Computer Science, Information Technology, or related field (or equivalent experience). Essential skills Strong hands-on expertise in PL/SQL and SQL development. Working knowledge of Oracle Forms and Oracle Reports development and maintenance. Desired skills Familiar with other development platforms Exposure to Azure management/administration Experience Experience in Oracle development and application maintenance/support. Experience supporting enterprise applications in production environments. Strong experience with Oracle Database 19c. Experience with Oracle WebLogic Server in application deployment and support. Experience developing and supporting Oracle APEX applications. Experience creating and maintaining reports using Crystal Reports. Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive