Mechanical Assembler Stable Temp to Perm, Immediate start Location: Buntingford Rate Guide: £14.00 per hour, Overtime at £21.00 per hour, time and a half This is a 40-hour working week, Monday to Friday. Rotating Early and Late shift We are seeking an experienced Mechanical Assembler to join a busy production team. Initially, the role will be on the early shift, working from 7:30am to 4:00pm. A late shift of 1:00pm to 10:00pm will be introduced shortly, after which you will be required to work both shifts on a rotating basis. A shift premium is paid after 4.00pm when working on the late shift Key responsibilities: Accurately assemble mechanical components and sub-assemblies to specification. Read and interpret assembly drawings, work instructions and bills of materials. Use hand tools, power tools and basic measuring equipment. Carry out quality checks and ensure components meet tolerance and finish requirements. Identify and report non-conformances and work with the team to implement corrective actions. Maintain accurate assembly records and complete paperwork as required. Follow health & safety procedures and maintain an orderly work area. Requirements: Previous experience as a mechanical assembler or in a similar manufacturing/assembly role. Strong mechanical aptitude and good manual dexterity. Ability to read basic engineering drawings and follow written instructions. Reliable, punctual and able to work the both the early and late shift Comfortable standing for prolonged periods and performing light to moderate lifting. Good communication skills and a team-oriented attitude. What's on offer: Temp-to-perm opportunity with the potential for a permanent role Standard 40-hour working week, Monday to Friday Overtime rate at time and a half Shift premium if working on late shift after 4.00 pm Opportunity for skills development and training HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer.
May 19, 2026
Full time
Mechanical Assembler Stable Temp to Perm, Immediate start Location: Buntingford Rate Guide: £14.00 per hour, Overtime at £21.00 per hour, time and a half This is a 40-hour working week, Monday to Friday. Rotating Early and Late shift We are seeking an experienced Mechanical Assembler to join a busy production team. Initially, the role will be on the early shift, working from 7:30am to 4:00pm. A late shift of 1:00pm to 10:00pm will be introduced shortly, after which you will be required to work both shifts on a rotating basis. A shift premium is paid after 4.00pm when working on the late shift Key responsibilities: Accurately assemble mechanical components and sub-assemblies to specification. Read and interpret assembly drawings, work instructions and bills of materials. Use hand tools, power tools and basic measuring equipment. Carry out quality checks and ensure components meet tolerance and finish requirements. Identify and report non-conformances and work with the team to implement corrective actions. Maintain accurate assembly records and complete paperwork as required. Follow health & safety procedures and maintain an orderly work area. Requirements: Previous experience as a mechanical assembler or in a similar manufacturing/assembly role. Strong mechanical aptitude and good manual dexterity. Ability to read basic engineering drawings and follow written instructions. Reliable, punctual and able to work the both the early and late shift Comfortable standing for prolonged periods and performing light to moderate lifting. Good communication skills and a team-oriented attitude. What's on offer: Temp-to-perm opportunity with the potential for a permanent role Standard 40-hour working week, Monday to Friday Overtime rate at time and a half Shift premium if working on late shift after 4.00 pm Opportunity for skills development and training HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer.
Travail Employment Group : Burgess Hill
Uckfield, Sussex
Production Operative £12.71 p/h, paid weekly, Temporary ongoing position, Uckfield, Monday - Friday 7:45am - 4:15pm / 3:15pm finish on a Friday, Free parking, Training and development, PPE supplied, Christmas shutdown, increasing annual leave, occasional overtime available. We are delighted to be working with our established and longstanding client who are seeking a Production Operative to join their existing production line. This is a great opportunity for experienced individuals looking for a manufacturing position in a busy working environment. To complete light assembly work Finishing all products ready for packing - prepping, cleaning, checking Some basic computer terminal work Complete all relevant documentation and ensure products comply with marking and tagging requirements The suitable candidate will offer experience in an assembly or production-based role and be confident using simple hand tools. You will need to demonstrate good dexterity skills, be physically fit with good stamina and be comfortable standing throughout the shift. Jobholders must be reliable, hardworking, and flexible, with a problem-solving approach to work. You will be a team player, and have come from a similar working environment as a factory operative or production operative. The Package Temporary position to begin immediately £12.71 p/h paid weekly Accrual of up to 32 days annual leave including bank holidays Uckfield with free parking Monday to Friday, 7:45am - 4:15pm (3:15pm finish on a Friday) PPE supplied Christmas shutdown Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion.
May 19, 2026
Full time
Production Operative £12.71 p/h, paid weekly, Temporary ongoing position, Uckfield, Monday - Friday 7:45am - 4:15pm / 3:15pm finish on a Friday, Free parking, Training and development, PPE supplied, Christmas shutdown, increasing annual leave, occasional overtime available. We are delighted to be working with our established and longstanding client who are seeking a Production Operative to join their existing production line. This is a great opportunity for experienced individuals looking for a manufacturing position in a busy working environment. To complete light assembly work Finishing all products ready for packing - prepping, cleaning, checking Some basic computer terminal work Complete all relevant documentation and ensure products comply with marking and tagging requirements The suitable candidate will offer experience in an assembly or production-based role and be confident using simple hand tools. You will need to demonstrate good dexterity skills, be physically fit with good stamina and be comfortable standing throughout the shift. Jobholders must be reliable, hardworking, and flexible, with a problem-solving approach to work. You will be a team player, and have come from a similar working environment as a factory operative or production operative. The Package Temporary position to begin immediately £12.71 p/h paid weekly Accrual of up to 32 days annual leave including bank holidays Uckfield with free parking Monday to Friday, 7:45am - 4:15pm (3:15pm finish on a Friday) PPE supplied Christmas shutdown Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion.
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Mechanical Fitter. What s on offer: Working pattern 4 days Monday Thursday! Overtime available Overseas travel occasionally Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Build sub-assemblies from component level following schematics. Work to tight tolerances (-10 microns) Working on complex machine builds Maintenance of refurb of heavy machinery Working experience of hydraulics and pneumatics would be an advantage. Confident with bearings, gears, and machine alignment About you: Mechanical trained with the ability to build a component from start to finish. Experience of multi axis precision machinery Ability to read and understand technical drawings and schematics. Confidence and the ability to work in a precision engineering environment and the ability to work on bespoke and one-off items. Good all-round mechanical assembler with a confident understanding of machine tools This role offers a fantastic opportunity, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
May 19, 2026
Full time
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Mechanical Fitter. What s on offer: Working pattern 4 days Monday Thursday! Overtime available Overseas travel occasionally Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Build sub-assemblies from component level following schematics. Work to tight tolerances (-10 microns) Working on complex machine builds Maintenance of refurb of heavy machinery Working experience of hydraulics and pneumatics would be an advantage. Confident with bearings, gears, and machine alignment About you: Mechanical trained with the ability to build a component from start to finish. Experience of multi axis precision machinery Ability to read and understand technical drawings and schematics. Confidence and the ability to work in a precision engineering environment and the ability to work on bespoke and one-off items. Good all-round mechanical assembler with a confident understanding of machine tools This role offers a fantastic opportunity, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
Travail Employment Group
Coleford, Gloucestershire
Mechanical Fitter - Coleford, Gloucestershire - Permanent - 37.5 working 6am til 2pm/2pm til 10pm - Monday to Friday - circa 34,000 - 33 days holiday, uniform, onsite parking and Pension - Interviewing ASAP Due to continued growth over the past couple of years, our client is looking to increase the team and are looking for Fitter/Mechanical Assembler on a permanent basis. The successful Fitter/Mechanical Assembler will be responsible for; Assembling and building products from Engineering drawings Using power and hand tools Raise any assembly issues with QA Engineer and Supervisor Fill in production data books with project critical information requested Complete check quality sheets Comply with health, safety, and environmental rules as detailed in risk assessments and COSHH sheets Operating overhead cranes Working as part of a team In order to be considered for this role you must be able to read from engineering drawings and have worked within a similar environment. Mechanical Fitter - Coleford, Gloucestershire - Permanent - 37.5 working 6am til 2pm/2pm til 10pm - Monday to Friday - circa 34,000 - 33 days holiday, uniform, onsite parking and Pension - Interviewing ASAP Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
May 18, 2026
Full time
Mechanical Fitter - Coleford, Gloucestershire - Permanent - 37.5 working 6am til 2pm/2pm til 10pm - Monday to Friday - circa 34,000 - 33 days holiday, uniform, onsite parking and Pension - Interviewing ASAP Due to continued growth over the past couple of years, our client is looking to increase the team and are looking for Fitter/Mechanical Assembler on a permanent basis. The successful Fitter/Mechanical Assembler will be responsible for; Assembling and building products from Engineering drawings Using power and hand tools Raise any assembly issues with QA Engineer and Supervisor Fill in production data books with project critical information requested Complete check quality sheets Comply with health, safety, and environmental rules as detailed in risk assessments and COSHH sheets Operating overhead cranes Working as part of a team In order to be considered for this role you must be able to read from engineering drawings and have worked within a similar environment. Mechanical Fitter - Coleford, Gloucestershire - Permanent - 37.5 working 6am til 2pm/2pm til 10pm - Monday to Friday - circa 34,000 - 33 days holiday, uniform, onsite parking and Pension - Interviewing ASAP Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Mechanical Assembler Location - Reading Working Hours - 8:00am - 4:30pm Salary - £30,000 £35,000 Are you a skilled Mechanical Assembler looking to take the next step in your engineering career? This hands on, varied role offers the chance to work within a collaborative production environment where precision, quality and teamwork are essential. The Role As a Mechanical Assembler, you will carry out mechanical subassembly work and support the build of complete finished units. You ll be interpreting engineering drawings, following assembly instructions, performing basic product testing and contributing to the smooth running of day to day production. You will also help maintain a safe and organised workspace while working closely with engineering and production teams. Key Responsibilities of the Mechanical Assembler Assemble and fit mechanical subassemblies and final products Conduct basic inspections and testing. Prepare and clean products for packing following testing Work with supervisors to meet daily production targets Report damages, shortages or quality issues promptly Maintain a clean, safe and efficient work area Experience & Skills Required Strong ability to read and interpret 2D & 3D engineering drawings Competent with mechanical hand tools and powered tools Excellent manual dexterity and strong attention to detail Able to work both independently and as part of a multi-skilled team Confident communicator, especially with engineers. Desirable Skills Basic hand soldering Ability to read electronic assembly documentation If you re looking to take the next step in your mechanical assembly career, we d love to hear from you. Press APPLY NOW or contact Charlie at Orion. INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.
May 18, 2026
Full time
Mechanical Assembler Location - Reading Working Hours - 8:00am - 4:30pm Salary - £30,000 £35,000 Are you a skilled Mechanical Assembler looking to take the next step in your engineering career? This hands on, varied role offers the chance to work within a collaborative production environment where precision, quality and teamwork are essential. The Role As a Mechanical Assembler, you will carry out mechanical subassembly work and support the build of complete finished units. You ll be interpreting engineering drawings, following assembly instructions, performing basic product testing and contributing to the smooth running of day to day production. You will also help maintain a safe and organised workspace while working closely with engineering and production teams. Key Responsibilities of the Mechanical Assembler Assemble and fit mechanical subassemblies and final products Conduct basic inspections and testing. Prepare and clean products for packing following testing Work with supervisors to meet daily production targets Report damages, shortages or quality issues promptly Maintain a clean, safe and efficient work area Experience & Skills Required Strong ability to read and interpret 2D & 3D engineering drawings Competent with mechanical hand tools and powered tools Excellent manual dexterity and strong attention to detail Able to work both independently and as part of a multi-skilled team Confident communicator, especially with engineers. Desirable Skills Basic hand soldering Ability to read electronic assembly documentation If you re looking to take the next step in your mechanical assembly career, we d love to hear from you. Press APPLY NOW or contact Charlie at Orion. INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.
15 per hour, 8:00am - 4:00pm, Early Friday Finish , Overtime x1.5, Weekly Pay , Full Product Training Provided A Mechanical Sub Assembler is needed to join an international, market-leading engineering business that is at the forefront of its industry. With significant recent investment in the site and a strong order book, this is a secure and stable opportunity within a well-managed and supportive team environment. The Mechanical Sub Assembler role is varied and hands-on, offering full product training and long-term development. As a Mechanical Sub Assembler, you will: Assemble shafts and driveline sub-assemblies Read and interpret basic engineering drawings Use hand tools and assembly equipment Work both independently and as part of a production team Follow quality and safety standards at all times This position would suit someone currently working as a Mechanical Fitter, Bench Fitter, Vehicle Fitter, Hydraulics Engineer etc. We Would Welcome People to Apply Who Have: Previous experience in mechanical assembly The ability to read basic engineering drawings Good attention to detail A strong work ethic and willingness to learn If you have worked in any mechanical assembly environment, your skills are highly transferable to this Mechanical Sub Assembler opportunity. Benefits of the Mechanical Sub Assembler Role 15 Overtime paid at x1.5 Weekly pay Free on-site parking Full product training provided Immediate start potentially available Large multinational organisation offering long-term job security Excellent company to add to your CV If this is of interest, please apply now or contact Rodger Morley at E3 Recruitment for more information.
May 17, 2026
Full time
15 per hour, 8:00am - 4:00pm, Early Friday Finish , Overtime x1.5, Weekly Pay , Full Product Training Provided A Mechanical Sub Assembler is needed to join an international, market-leading engineering business that is at the forefront of its industry. With significant recent investment in the site and a strong order book, this is a secure and stable opportunity within a well-managed and supportive team environment. The Mechanical Sub Assembler role is varied and hands-on, offering full product training and long-term development. As a Mechanical Sub Assembler, you will: Assemble shafts and driveline sub-assemblies Read and interpret basic engineering drawings Use hand tools and assembly equipment Work both independently and as part of a production team Follow quality and safety standards at all times This position would suit someone currently working as a Mechanical Fitter, Bench Fitter, Vehicle Fitter, Hydraulics Engineer etc. We Would Welcome People to Apply Who Have: Previous experience in mechanical assembly The ability to read basic engineering drawings Good attention to detail A strong work ethic and willingness to learn If you have worked in any mechanical assembly environment, your skills are highly transferable to this Mechanical Sub Assembler opportunity. Benefits of the Mechanical Sub Assembler Role 15 Overtime paid at x1.5 Weekly pay Free on-site parking Full product training provided Immediate start potentially available Large multinational organisation offering long-term job security Excellent company to add to your CV If this is of interest, please apply now or contact Rodger Morley at E3 Recruitment for more information.
Assembly Operative Double days, moving to Night Shift after training. Havant £15.76 per hour rising to £16.40 per hour + On Site Parking + Subsidised Canteen. Double Day Shift (6am 2pm / 2pm 10pm Mon Fri) moving to Night Shift (10pm to 6am Sunday to Thursday nights) after initial training. Are you an experienced Assembler with a manufacturing background and confident using hand tools Do you enjoy working in a fast-paced production environment where quality and teamwork matter Can you work night shifts Workshop Recruitment is supporting a large manufacturer of electrical safety devices in the search for assembler / testers to join their production team in Havant. This is an ongoing contract opportunity offering stable hours, a structured shift pattern, and excellent onsite facilities. The successful Assembler will support the assembly and testing of a range of small electrical products while maintaining high quality standards. This role would suit someone with previous production or manufacturing experience looking for a long-term opportunity. Key Responsibilities Assemble small electrical products to specification Use hand tools and basic assembly equipment safely Follow production instructions and quality procedures Test completed products Inspect completed products for faults or defects Maintain a clean and organised work area Work efficiently to meet production targets Support other manufacturing tasks as required Skills & Knowledge Required Previous experience as an Assembler or production operative Manufacturing or production background preferred Able to stand while working Confident using hand tools Good attention to detail Ability to follow written instructions Reliable and punctual approach to work Able to work effectively within a team Good manual dexterity and practical skills
May 17, 2026
Seasonal
Assembly Operative Double days, moving to Night Shift after training. Havant £15.76 per hour rising to £16.40 per hour + On Site Parking + Subsidised Canteen. Double Day Shift (6am 2pm / 2pm 10pm Mon Fri) moving to Night Shift (10pm to 6am Sunday to Thursday nights) after initial training. Are you an experienced Assembler with a manufacturing background and confident using hand tools Do you enjoy working in a fast-paced production environment where quality and teamwork matter Can you work night shifts Workshop Recruitment is supporting a large manufacturer of electrical safety devices in the search for assembler / testers to join their production team in Havant. This is an ongoing contract opportunity offering stable hours, a structured shift pattern, and excellent onsite facilities. The successful Assembler will support the assembly and testing of a range of small electrical products while maintaining high quality standards. This role would suit someone with previous production or manufacturing experience looking for a long-term opportunity. Key Responsibilities Assemble small electrical products to specification Use hand tools and basic assembly equipment safely Follow production instructions and quality procedures Test completed products Inspect completed products for faults or defects Maintain a clean and organised work area Work efficiently to meet production targets Support other manufacturing tasks as required Skills & Knowledge Required Previous experience as an Assembler or production operative Manufacturing or production background preferred Able to stand while working Confident using hand tools Good attention to detail Ability to follow written instructions Reliable and punctual approach to work Able to work effectively within a team Good manual dexterity and practical skills
Production Assembler - Electronics Coventry - Ansty Park 18 per hour, rising to 19 per hour 4-Day Working Week 20-Week Project Immediate Start Manpower is recruiting experienced Production Assemblers to join a secure, classified manufacturing project based in Coventry. These are temporary roles for an initial 20-week period, offering competitive pay and a 4-day working week. Screening & Vetting Requirements Due to the nature of this project, the following are mandatory: BPSS clearance UK Born nationals who still hold UK nationality only Trade Tests include Soldering and Assembly Colour-blindness Numeracy and Literacy The Role You'll be working within a structured production environment on precision electronic and mechanical assemblies. This role requires strong attention to detail and the ability to work to defined quality and production standards. Key Responsibilities Soldering to a high standard Electronic and mechanical assembly (small-build work preferred) Working on a production line to meet output targets Operating within a secure and compliance-led environment Pay & Working Hours 18 per hour Rising to 19 per hour upon completion of performance targets Monday to Thursday 07:00 - 16:30 36 hours per week (9 hours per day including 30-minute unpaid break) Every Friday off Essential Experience Proven soldering experience Electronic and mechanical assembly background Production line experience Use of Hand Tools Contract Details Temporary assignment 20-week initial project Immediate starts available
May 17, 2026
Seasonal
Production Assembler - Electronics Coventry - Ansty Park 18 per hour, rising to 19 per hour 4-Day Working Week 20-Week Project Immediate Start Manpower is recruiting experienced Production Assemblers to join a secure, classified manufacturing project based in Coventry. These are temporary roles for an initial 20-week period, offering competitive pay and a 4-day working week. Screening & Vetting Requirements Due to the nature of this project, the following are mandatory: BPSS clearance UK Born nationals who still hold UK nationality only Trade Tests include Soldering and Assembly Colour-blindness Numeracy and Literacy The Role You'll be working within a structured production environment on precision electronic and mechanical assemblies. This role requires strong attention to detail and the ability to work to defined quality and production standards. Key Responsibilities Soldering to a high standard Electronic and mechanical assembly (small-build work preferred) Working on a production line to meet output targets Operating within a secure and compliance-led environment Pay & Working Hours 18 per hour Rising to 19 per hour upon completion of performance targets Monday to Thursday 07:00 - 16:30 36 hours per week (9 hours per day including 30-minute unpaid break) Every Friday off Essential Experience Proven soldering experience Electronic and mechanical assembly background Production line experience Use of Hand Tools Contract Details Temporary assignment 20-week initial project Immediate starts available
Mechanical Assembler salary 16.50 per hour or 31,746 annually + over time at 1.5 or x 2, Keynsham, BS31, 33 days holiday, pension, sick pay, parking, Monday to Friday 37 hour week, flexible start and finish times, Permanent role. An opportunity to join an established, friendly and stable manufacturing company as a mechanical fitter assembling special purpose machinery, working in a mechanical assembly workshop environment reporting to the mechanical team leader. The mechanical assembler, machine assembly role involves Build & install of mechanical sub assemblies in accordance with supplied engineering drawings and specification sheets. Complete work in a timely manner and to meet the machine build time line. mechanical bench fitting work Build of mechanical sub assemblies Set-up & alignment of machine frames and tooling Set-up machines to specified tolerances and capability Functional testing and fault finding Use of conventional hand and machine tools, any basic machining skills are useful Opportunities to support visits to customers to commission & test and set up machines The mechanical assembler or machine machine assembly position requirements are Ideally from a mechanical fitting or mechanical assembly background any knowledge of packaging industry would be of interest Would suit a candidate with attention to detail, some computer literacy Able to read engineering drawings and follow specification sheets A mechanical apprenticeship or technical training to City & Guilds or NVQ qualification or equivalent level is ideal but candidates who have experience through a time served route would also be of interest The mechanical assembler role is working with an established and friendly production engineering company on the outskirts of Bristol in Keynsham where you will get full product training and be an integral part of the team. Benefits Job title: mechanical assembler Salary: 16.50 per hour or 31,746 annually + over time at 1.5 or x 2 Benefits: 33 days holiday, pension, sick pay, parking Hours: Monday to Friday 37 hour week, flexible start and finish times Location: Keynsham, BS31 Duration: Permanent Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
May 17, 2026
Full time
Mechanical Assembler salary 16.50 per hour or 31,746 annually + over time at 1.5 or x 2, Keynsham, BS31, 33 days holiday, pension, sick pay, parking, Monday to Friday 37 hour week, flexible start and finish times, Permanent role. An opportunity to join an established, friendly and stable manufacturing company as a mechanical fitter assembling special purpose machinery, working in a mechanical assembly workshop environment reporting to the mechanical team leader. The mechanical assembler, machine assembly role involves Build & install of mechanical sub assemblies in accordance with supplied engineering drawings and specification sheets. Complete work in a timely manner and to meet the machine build time line. mechanical bench fitting work Build of mechanical sub assemblies Set-up & alignment of machine frames and tooling Set-up machines to specified tolerances and capability Functional testing and fault finding Use of conventional hand and machine tools, any basic machining skills are useful Opportunities to support visits to customers to commission & test and set up machines The mechanical assembler or machine machine assembly position requirements are Ideally from a mechanical fitting or mechanical assembly background any knowledge of packaging industry would be of interest Would suit a candidate with attention to detail, some computer literacy Able to read engineering drawings and follow specification sheets A mechanical apprenticeship or technical training to City & Guilds or NVQ qualification or equivalent level is ideal but candidates who have experience through a time served route would also be of interest The mechanical assembler role is working with an established and friendly production engineering company on the outskirts of Bristol in Keynsham where you will get full product training and be an integral part of the team. Benefits Job title: mechanical assembler Salary: 16.50 per hour or 31,746 annually + over time at 1.5 or x 2 Benefits: 33 days holiday, pension, sick pay, parking Hours: Monday to Friday 37 hour week, flexible start and finish times Location: Keynsham, BS31 Duration: Permanent Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Ernest Gordon Recruitment Limited
Stroud, Gloucestershire
Mechanical Fitter/Engineer (Training/progression) 35,000 ( 40,000 - 42,000 OTE) overtime + Progression + Training + Bonus Stroud Do you have a Mechanical Fitter or Engineer background or similar, looking for a new role with an expanding business, that will provide you with multiple routes of progression, access to regular overtime and bonuses to boost your annual income? On offer is the opportunity to join a market-leading business that supports your development through training and offers a clear path for career progression, giving you greater autonomy over your future. The company is globally recognised for delivering engineering solutions to a diverse client base, ranging from aviation to military sectors This is a hands-on, static role where you will help build, install, and maintain equipment fitted to a specialist vehicle. You will work with tools to assemble components such as pumps, valves, and pipework. Your role will also involve inspecting systems for faults, carrying out repairs, and ensuring everything operates smoothly. This role would suit someone with a Mechanical background or similar looking to join a company that will provide training to upskill ad offer multiple pathways of progression. The role Mechanical Assembly Carry out maintenance, fault-finding, and repair Static role The Person Commutable to stroud Mechanical background Reference BBBH25348 Mechanical fitter, Pneumatics, Hydraulics, Pipe, Mechanic, Plant Fitter, Pump Engineer, Automotive, Motors, Plumber, Agricultural, Plumbing Mechanical technician, Fluid System Technician, Maintenance Engineer, Stroud, Nailsworth, Gloucester, Dursley, Assembley, Assembler, Mechnical maintenance, Mechanical Engineer If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you
May 16, 2026
Full time
Mechanical Fitter/Engineer (Training/progression) 35,000 ( 40,000 - 42,000 OTE) overtime + Progression + Training + Bonus Stroud Do you have a Mechanical Fitter or Engineer background or similar, looking for a new role with an expanding business, that will provide you with multiple routes of progression, access to regular overtime and bonuses to boost your annual income? On offer is the opportunity to join a market-leading business that supports your development through training and offers a clear path for career progression, giving you greater autonomy over your future. The company is globally recognised for delivering engineering solutions to a diverse client base, ranging from aviation to military sectors This is a hands-on, static role where you will help build, install, and maintain equipment fitted to a specialist vehicle. You will work with tools to assemble components such as pumps, valves, and pipework. Your role will also involve inspecting systems for faults, carrying out repairs, and ensuring everything operates smoothly. This role would suit someone with a Mechanical background or similar looking to join a company that will provide training to upskill ad offer multiple pathways of progression. The role Mechanical Assembly Carry out maintenance, fault-finding, and repair Static role The Person Commutable to stroud Mechanical background Reference BBBH25348 Mechanical fitter, Pneumatics, Hydraulics, Pipe, Mechanic, Plant Fitter, Pump Engineer, Automotive, Motors, Plumber, Agricultural, Plumbing Mechanical technician, Fluid System Technician, Maintenance Engineer, Stroud, Nailsworth, Gloucester, Dursley, Assembley, Assembler, Mechnical maintenance, Mechanical Engineer If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
May 16, 2026
Full time
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Position: Cable Assembler Salary: 12.71 - 14.24 per hour Location: Northampton Proactive currently have an exciting opportunity for a Cable Assembler to begin work for a leading manufacturing and production business in Northampton. Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Cable Assembler to help ensure the quality and accuracy of the Site's function is well maintained throughout this new and excited influx of work. Key duties include: Wiring of cables and looms Crimping Testing and quality checking products Packing, labelling and stock control Reading technical drawings and work instructions Applying coatings and heat shrink General production and assembly tasks What we're looking for: Previous experience in cable assembly and basic wiring Good attention to detail Fine soldering experience preferred Ability to work independently and within a team Basic IT skills (Outlook, Word, Excel) Positive attitude and willingness to learn If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Cable Assembler Salary: 12.71 - 14.24 per hour Location: Northampton Proactive currently have an exciting opportunity for a Cable Assembler to begin work for a leading manufacturing and production business in Northampton. Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Cable Assembler to help ensure the quality and accuracy of the Site's function is well maintained throughout this new and excited influx of work. Key duties include: Wiring of cables and looms Crimping Testing and quality checking products Packing, labelling and stock control Reading technical drawings and work instructions Applying coatings and heat shrink General production and assembly tasks What we're looking for: Previous experience in cable assembly and basic wiring Good attention to detail Fine soldering experience preferred Ability to work independently and within a team Basic IT skills (Outlook, Word, Excel) Positive attitude and willingness to learn If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Electromechanical Assembler Pay Rate: £15.51ph PAYE or £21.72 Umbrella Location: Farnborough Employment Type: Contract/Temp to perm/long term contract About the Role We are seeking a skilled and detail oriented Electromechanical Assembler to join our growing manufacturing team in Farnborough. In this role, you will be responsible for the intricate assembly of components and will be putting your electromechanical assembly skills to excellent use. Key Responsibilities of the Electromechanical Assembler Perform intricate electromechanical assembly, working closely with different teams Diagnose faults and complete accurate assessments of required work Carry out component overhauls, adjustments, and lubrication Complete detailed assembly of small and delicate components for a manufacturing environment About the Electromechanical Assembler Previous experience as an Electromechanical Assembler or Technician Excellent attention to detail and strong manual dexterity Ability to work independently as well as part of a team A passion for precision engineering and high†quality workmanship Formal electromechanical or engineering training is highly beneficial but not essential What s on Offer for the Electromechanical Assembler £15.51ph Supportive and well equipped workshop environment Opportunities for training and skills development Long term contract/potential Temp to perm How to Apply If you re a dedicated Electromechanical Assembler ready for your next challenge, we d love to hear from you. INDMAN
May 16, 2026
Full time
Electromechanical Assembler Pay Rate: £15.51ph PAYE or £21.72 Umbrella Location: Farnborough Employment Type: Contract/Temp to perm/long term contract About the Role We are seeking a skilled and detail oriented Electromechanical Assembler to join our growing manufacturing team in Farnborough. In this role, you will be responsible for the intricate assembly of components and will be putting your electromechanical assembly skills to excellent use. Key Responsibilities of the Electromechanical Assembler Perform intricate electromechanical assembly, working closely with different teams Diagnose faults and complete accurate assessments of required work Carry out component overhauls, adjustments, and lubrication Complete detailed assembly of small and delicate components for a manufacturing environment About the Electromechanical Assembler Previous experience as an Electromechanical Assembler or Technician Excellent attention to detail and strong manual dexterity Ability to work independently as well as part of a team A passion for precision engineering and high†quality workmanship Formal electromechanical or engineering training is highly beneficial but not essential What s on Offer for the Electromechanical Assembler £15.51ph Supportive and well equipped workshop environment Opportunities for training and skills development Long term contract/potential Temp to perm How to Apply If you re a dedicated Electromechanical Assembler ready for your next challenge, we d love to hear from you. INDMAN
A manufacturer of automotive components is looking for an Assembler to join their growing team. Ideally you will have Assembly experience or come from a motor mechanic type background or maybe you have completed a manufacturing or engineering college course or similar equivalence. This is an exciting time to join a fast-growing company who have a fantastic working facility with a full order book. The company work on projects for ulta-high value automotive companies including Mercedes AMG-ONE, Pininfarina, Aston Martin, McLaren etc so you will be working on some exciting projects. If you want stability, this is the company to work for! There are 3 static shifts which are as follows:- 6am till 2.30pm Monday to Friday 8am to 4.30pm Monday to Friday 11.30am to 8pm Monday to Friday The hourly rate is 12.71ph There is free parking on site. Assembler Duties:- Assembling products to company standard Reporting defects to management Reviewing manufacturing documents Read from drawings Using hand and power tools Other tasks such as blocking up and packing goods as an example For the role you will need to have a good eye for detail, take pride in the quality of your work and be reliable. This is a temporary to permanent Assembler role. If you have any questions about the Assembly role or the company, please call Prime Appointments and ask for Simon. If you have assembly experience and are interested, please apply!
May 16, 2026
Seasonal
A manufacturer of automotive components is looking for an Assembler to join their growing team. Ideally you will have Assembly experience or come from a motor mechanic type background or maybe you have completed a manufacturing or engineering college course or similar equivalence. This is an exciting time to join a fast-growing company who have a fantastic working facility with a full order book. The company work on projects for ulta-high value automotive companies including Mercedes AMG-ONE, Pininfarina, Aston Martin, McLaren etc so you will be working on some exciting projects. If you want stability, this is the company to work for! There are 3 static shifts which are as follows:- 6am till 2.30pm Monday to Friday 8am to 4.30pm Monday to Friday 11.30am to 8pm Monday to Friday The hourly rate is 12.71ph There is free parking on site. Assembler Duties:- Assembling products to company standard Reporting defects to management Reviewing manufacturing documents Read from drawings Using hand and power tools Other tasks such as blocking up and packing goods as an example For the role you will need to have a good eye for detail, take pride in the quality of your work and be reliable. This is a temporary to permanent Assembler role. If you have any questions about the Assembly role or the company, please call Prime Appointments and ask for Simon. If you have assembly experience and are interested, please apply!
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
May 16, 2026
Full time
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
Position: Assembly Technician Location: Bishops Stortford Salary: 13.00ph - 14.56ph - Depending on experience Hours : Full Time - 37.5 hours per week - 08:00am - 16:00pm, Monday to Friday Proactive are currently in search of an experienced Electro Mechanical Assemblers to start work immediately for a client of ours in Bishops Stortford. The successful candidate will be working as part of a team within the production area, and should have previous assembly experience working within a faced paced manufacturing environment. Duties will include but not be limited to: Mechanical / Electro Assembly, involving wet and dry systems. Soldering & crimping. Use of hand tools, with some use of electrical hand tools Ability to be read wiring diagrams Ability to understand assembly diagrams Cooperate and work with all other production staff Ensure all operations are complete and done correctly How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Assembly Technician Location: Bishops Stortford Salary: 13.00ph - 14.56ph - Depending on experience Hours : Full Time - 37.5 hours per week - 08:00am - 16:00pm, Monday to Friday Proactive are currently in search of an experienced Electro Mechanical Assemblers to start work immediately for a client of ours in Bishops Stortford. The successful candidate will be working as part of a team within the production area, and should have previous assembly experience working within a faced paced manufacturing environment. Duties will include but not be limited to: Mechanical / Electro Assembly, involving wet and dry systems. Soldering & crimping. Use of hand tools, with some use of electrical hand tools Ability to be read wiring diagrams Ability to understand assembly diagrams Cooperate and work with all other production staff Ensure all operations are complete and done correctly How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Assembly Technician (Full Time) Job details Job type Full-time Location Malmesbury SN16 Our client designs and manufactures agricultural machinery which is used all around the world. We're seeking an experienced Assembly Technician to join our production team - working to complete final assembly across our wide range of products with precision, care and efficiency. Skills required: Mechanical assembly & fitting - including of bearings, sprockets, gearboxes etc. Ability to read engineering drawings and technical diagrams Operation of hand and power tools Working to specified timescales and tolerances Attention to detail and ability to spot quality issues Knowledge of relevant safety standards Keenness and interest to learn and develop within the role A reasonable level of strength and fitness, as the role includes aspects of manual handling. Beneficial but not critical: Electrical assembly experience Crane certificate Scissor lift licence Forklift licence Competitive pay available with opportunities for overtime at 1.5x and productivity bonus. Job Type: Full-time Benefits: Company pension Application question(s): Please note there is limited public transport available to our site. Please confirm you have your own vehicle and are commute to SN16 Work authorisation: United Kingdom (required) Work Location: In person Further information is available on request. If you are interested please apply online to avoid missing out on this fantastic opportunity Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Assembly Technician (Full Time) Job details Job type Full-time Location Malmesbury SN16 Our client designs and manufactures agricultural machinery which is used all around the world. We're seeking an experienced Assembly Technician to join our production team - working to complete final assembly across our wide range of products with precision, care and efficiency. Skills required: Mechanical assembly & fitting - including of bearings, sprockets, gearboxes etc. Ability to read engineering drawings and technical diagrams Operation of hand and power tools Working to specified timescales and tolerances Attention to detail and ability to spot quality issues Knowledge of relevant safety standards Keenness and interest to learn and develop within the role A reasonable level of strength and fitness, as the role includes aspects of manual handling. Beneficial but not critical: Electrical assembly experience Crane certificate Scissor lift licence Forklift licence Competitive pay available with opportunities for overtime at 1.5x and productivity bonus. Job Type: Full-time Benefits: Company pension Application question(s): Please note there is limited public transport available to our site. Please confirm you have your own vehicle and are commute to SN16 Work authorisation: United Kingdom (required) Work Location: In person Further information is available on request. If you are interested please apply online to avoid missing out on this fantastic opportunity Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Hands-on uPVC window and door manufacturing role with fixed shifts, weekly bonus and clear pay progression. Window Fabricator / Production Operative Lenwade, Norwich, NR9 Permanent, full-time £12.76 to £13.81 per hour Monday to Friday, fixed shifts Weekly bonus Pay progression PM shift allowance Polyframe is looking for Window Fabricators / Production Operatives to join its manufacturing team in Lenwade. This is a practical, hands-on role making uPVC windows and doors . It would suit someone who has worked in window fabrication, door manufacturing, glazing, beading, frame assembly, uPVC production or a similar factory role using hand tools, air tools or machinery. Shifts available: Monday to Friday, 6.00am to 2.00pm Monday to Friday, 2.15pm to 10.15pm About the company POLYFRAME is a leading independent fabricator of high-quality PVCu window and door systems, manufacturing products for trade customers across the UK. What's on offer Permanent, full-time role £12.76 per hour starting rate Progression to £13.06 and £13.81 per hour Realistic progression within 3 to 6 months after training Weekly bonus scheme, based on targets £20 per week shift allowance for the PM shift Fixed Monday to Friday shifts 22 days' holiday, rising to 25 days with service, plus Bank Holidays Option to buy up to 2 extra holiday days per year Company pension Full PPE provided Paid volunteering day Long-term progression opportunities What you'll be doing You'll work as part of a busy production team manufacturing uPVC window and door products. Your role will include: Cutting uPVC profiles Reinforcing and welding window frames Attaching handles and mechanisms Using hand tools, air tools and production machinery Beading and glazing windows Checking finished products for quality Handling and loading window frames safely Working to production targets Keeping your work area clean, organised and safe What we're looking for We are especially keen to hear from people with experience in: Window fabrication Door manufacturing uPVC or aluminium fabrication Glazing, beading or frame assembly Factory production using hand tools or power tools Practical assembly-style manufacturing You do not need to have done this exact role before, but you do need to be practical, reliable, hands-on and comfortable working in a busy production environment. Previous window or door experience would be a strong advantage. Why apply? This is a good opportunity for someone who wants stable, permanent factory work with fixed shifts, weekly bonus and a clear route to increase their hourly rate as they complete training. If you have experience making, assembling, fitting, glazing or fabricating windows, doors, frames or similar products, this role could be a strong fit. Apply now Please apply with your CV today. Please note The role is based in Lenwade. Own transport would be useful, as the nearest bus stop is approximately half a mile away. Applicants must already have the right to work in the UK, as sponsorship is not available for this role. No agencies, please. Alternative job titles may include Window Fabricator, Door Fabricator, uPVC Fabricator, Production Operative, Assembly Operative, Glazing Operative, Frame Assembler, Fabrication Operative, Manufacturing Operative, Machine Operative
May 15, 2026
Full time
Hands-on uPVC window and door manufacturing role with fixed shifts, weekly bonus and clear pay progression. Window Fabricator / Production Operative Lenwade, Norwich, NR9 Permanent, full-time £12.76 to £13.81 per hour Monday to Friday, fixed shifts Weekly bonus Pay progression PM shift allowance Polyframe is looking for Window Fabricators / Production Operatives to join its manufacturing team in Lenwade. This is a practical, hands-on role making uPVC windows and doors . It would suit someone who has worked in window fabrication, door manufacturing, glazing, beading, frame assembly, uPVC production or a similar factory role using hand tools, air tools or machinery. Shifts available: Monday to Friday, 6.00am to 2.00pm Monday to Friday, 2.15pm to 10.15pm About the company POLYFRAME is a leading independent fabricator of high-quality PVCu window and door systems, manufacturing products for trade customers across the UK. What's on offer Permanent, full-time role £12.76 per hour starting rate Progression to £13.06 and £13.81 per hour Realistic progression within 3 to 6 months after training Weekly bonus scheme, based on targets £20 per week shift allowance for the PM shift Fixed Monday to Friday shifts 22 days' holiday, rising to 25 days with service, plus Bank Holidays Option to buy up to 2 extra holiday days per year Company pension Full PPE provided Paid volunteering day Long-term progression opportunities What you'll be doing You'll work as part of a busy production team manufacturing uPVC window and door products. Your role will include: Cutting uPVC profiles Reinforcing and welding window frames Attaching handles and mechanisms Using hand tools, air tools and production machinery Beading and glazing windows Checking finished products for quality Handling and loading window frames safely Working to production targets Keeping your work area clean, organised and safe What we're looking for We are especially keen to hear from people with experience in: Window fabrication Door manufacturing uPVC or aluminium fabrication Glazing, beading or frame assembly Factory production using hand tools or power tools Practical assembly-style manufacturing You do not need to have done this exact role before, but you do need to be practical, reliable, hands-on and comfortable working in a busy production environment. Previous window or door experience would be a strong advantage. Why apply? This is a good opportunity for someone who wants stable, permanent factory work with fixed shifts, weekly bonus and a clear route to increase their hourly rate as they complete training. If you have experience making, assembling, fitting, glazing or fabricating windows, doors, frames or similar products, this role could be a strong fit. Apply now Please apply with your CV today. Please note The role is based in Lenwade. Own transport would be useful, as the nearest bus stop is approximately half a mile away. Applicants must already have the right to work in the UK, as sponsorship is not available for this role. No agencies, please. Alternative job titles may include Window Fabricator, Door Fabricator, uPVC Fabricator, Production Operative, Assembly Operative, Glazing Operative, Frame Assembler, Fabrication Operative, Manufacturing Operative, Machine Operative
Role: Software Engineer Cheltenham (3-4 days on site) Rate : 82.50 Umbrella Duration : 6 Months Vacancy Details : Key Activities Software requirements analysis Software design Implementation (language is C) Module test and integration test Timing analysis, full software verification, authoring and execution of software test scripts Essential Responsibilities Software Development (requirements, design, code) Software Verification (review, test, analysis.) Undertake Software engineering tasks as requested by team lead. Working to DO178-C Ability to analyse tasking and provide feedback if the task appears more complicated than first envisaged Qualifications / Requirements Previous experience working in Aerospace / Safety critical software roles, with an embedded software qualification or equivalent experience Desired Characteristics Experience in use of: DOORS, TI Code Composer Studio IDE, WindRiver Workbench, LDRA (or similar), Rational Team Concert, Rally and Jenkins Experience to Agile and/or iterative development processes Exposure to support of Aerospace Certification Authority led activities, including SOI Audits Experience in writing assembler Knowledge of network protocols inc. ARINC 664, ARINC-429, ARINC 629 and ARINC-825 (CAN) Knowledge / Experience of document records management
May 15, 2026
Contractor
Role: Software Engineer Cheltenham (3-4 days on site) Rate : 82.50 Umbrella Duration : 6 Months Vacancy Details : Key Activities Software requirements analysis Software design Implementation (language is C) Module test and integration test Timing analysis, full software verification, authoring and execution of software test scripts Essential Responsibilities Software Development (requirements, design, code) Software Verification (review, test, analysis.) Undertake Software engineering tasks as requested by team lead. Working to DO178-C Ability to analyse tasking and provide feedback if the task appears more complicated than first envisaged Qualifications / Requirements Previous experience working in Aerospace / Safety critical software roles, with an embedded software qualification or equivalent experience Desired Characteristics Experience in use of: DOORS, TI Code Composer Studio IDE, WindRiver Workbench, LDRA (or similar), Rational Team Concert, Rally and Jenkins Experience to Agile and/or iterative development processes Exposure to support of Aerospace Certification Authority led activities, including SOI Audits Experience in writing assembler Knowledge of network protocols inc. ARINC 664, ARINC-429, ARINC 629 and ARINC-825 (CAN) Knowledge / Experience of document records management
