1467 jobs found

Field Service Engineer, Laboratory Automation Systems Overall Earnings £60,000+ Basic Salary Up To £52,000 Overtime On Call Allowance 10% Bonus Company Car (Electric Or Hybrid) Pension Healthcare Life Insurance Phone, Laptop Holidays The role will involve working one weekend in four (during this week you will receive two alternative days off work) The Role Field Service Engineer, Laboratory Automation Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for: The service, installation, breakdown, repair and calibration of a wide range of sophisticated laboratory diagnostics systems utilised within pathology departments, NHS laboratories and clinical chemistry environments Supporting flow cytometry, cell separation and diagnostics products located at customer sites Your Background Field Service Engineer, Laboratory Automation Systems To apply you should be able to demonstrate the following: A strong background working in a field service or technical support role, gained within an electronics or electro-mechanical service or technical support background Applications are welcomed from a wide variety of backgrounds including high value electronics capital equipment,microscopy, cameras, lasers, x-ray security detection, ex-forces (weapons guidance, radar, avionics or biomedical engineering), medical device, biomedical engineering, pathology laboratory diagnostics and laboratory device Qualified to a minimum ONC / HNC level or above in electronics or another relevant technical discipline Impeccable customer service skills and the ability to remain confident in customer facing environments The Company - Field Service Engineer, Laboratory Automation Systems Instantly recognisable brand leader supplying a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector Their commitment to investment in Research and Development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business.

Field Service Engineer, Laboratory Automation Systems Overall Earnings £60,000+ Basic Salary Up To £52,000 Overtime On Call Allowance 10% Bonus Company Car (Electric Or Hybrid) Pension Healthcare Life Insurance Phone, Laptop Holidays The role will involve working one weekend in four (during this week you will receive two alternative days off work) The Role Field Service Engineer, Laboratory Automation Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for: The service, installation, breakdown, repair and calibration of a wide range of sophisticated laboratory diagnostics systems utilised within pathology departments, NHS laboratories and clinical chemistry environments Supporting flow cytometry, cell separation and diagnostics products located at customer sites Your Background Field Service Engineer, Laboratory Automation Systems To apply you should be able to demonstrate the following: A strong background working in a field service or technical support role, gained within an electronics or electro-mechanical service or technical support background Applications are welcomed from a wide variety of backgrounds including high value electronics capital equipment,microscopy, cameras, lasers, x-ray security detection, ex-forces (weapons guidance, radar, avionics or biomedical engineering), medical device, biomedical engineering, pathology laboratory diagnostics and laboratory device Qualified to a minimum ONC / HNC level or above in electronics or another relevant technical discipline Impeccable customer service skills and the ability to remain confident in customer facing environments The Company - Field Service Engineer, Laboratory Automation Systems Instantly recognisable brand leader supplying a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector Their commitment to investment in Research and Development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business.

Technical Sales & Business Development Manager - South Due to a dedication to continued profitable, ambitious and long-term growth, our client now seeks to appoint a Technical Sales & Business Development Manager, with the focus upon successfully developing, maintaining and managing clients. This challenging and exciting opportunity requires an individual with a technical background and proven experience in taking the lead to develop and ultimately secure opportunities from the construction, civil engineering or infrastructure sectors. This position is based from home with appropriate travel to meet clients or attend site visits. A full UK driving licence is required, and a minimum qualification level of an HNL in any related construction discipline. The role will provide support to the Sales Director and will lead the management and development of new and existing clients. This will be successfully achieved through effective engagement and servicing of associated stakeholders, and a focus upon maintaining net margins, whilst liaising closely with the senior management team in providing regular business reporting in regard to sales and business development matters. The Role You will be responsible for the ongoing development and continued success with both existing and new clients, whilst helping to develop and secure new project opportunities You will possess demonstrable achievement within any area of the aforementioned sectors You will have the ability to nurture profitable relationships with a wide cross section of clients, whilst also providing appropriate technical advice and guidance if required You will manage your own workload and develop and nurture clients effectively Provide regular progress reporting to the management in regard to potential opportunities You should be outgoing with excellent negotiation, communication and presentation skills, and have the ability to form long term mutually beneficial and harmonious relationships with clients and customers of all levels The Person You will offer an advanced level of technical sales expertise and client support experience gained from working within any area of the above-mentioned sectors, or variations thereof You will have demonstrable and advanced technical client development and management experience in a similar role within the aforementioned areas You will hold a full UK driving licence and be proficient in Microsoft Office packages You will be qualified to a minimum level of an HNC in any related construction discipline Our Client Our client is one of the UK s leading specialist contractors, renowned for providing technically advanced and cost-effective solutions across the structural support, ground stabilisation, land remediation, foundations, underpinning, ground improvement, stabilisation, geotechnical engineering and subsidence repair sectors. Their offering includes design, build, installation and non-disruptive services provided to all areas of the residential, social housing, local authorities, housing associations and public sectors. Their reputation is built on engineering excellence and a commitment to continual innovation, backed by a central technical design and engineering resource, ensuring they deliver a full range of techniques bespoke to any requirement and specification. A very attractive basic salary, plus a highly lucrative bonus commission scheme, and an extensive benefits package is on offer to the successful candidate, along with longevity of career given the dedicated and ambitious growth plans and forward order workload for the UK.

Field Service Engineer, Laboratory Automation Systems Overall Earnings £60,000+ Basic Salary Up To £52,000 Overtime On Call Allowance 10% Bonus Company Car (Electric Or Hybrid) Pension Healthcare Life Insurance Phone, Laptop Holidays The role will involve working one weekend in four (during this week you will receive two alternative days off work) The Role Field Service Engineer, Laboratory Automation Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for: The service, installation, breakdown, repair and calibration of a wide range of sophisticated laboratory diagnostics systems utilised within pathology departments, NHS laboratories and clinical chemistry environments Supporting flow cytometry, cell separation and diagnostics products located at customer sites Your Background Field Service Engineer, Laboratory Automation Systems To apply you should be able to demonstrate the following: A strong background working in a field service or technical support role, gained within an electronics or electro-mechanical service or technical support background Applications are welcomed from a wide variety of backgrounds including high value electronics capital equipment,microscopy, cameras, lasers, x-ray security detection, ex-forces (weapons guidance, radar, avionics or biomedical engineering), medical device, biomedical engineering, pathology laboratory diagnostics and laboratory device Qualified to a minimum ONC / HNC level or above in electronics or another relevant technical discipline Impeccable customer service skills and the ability to remain confident in customer facing environments The Company - Field Service Engineer, Laboratory Automation Systems Instantly recognisable brand leader supplying a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector Their commitment to investment in Research and Development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business.

Job Title: Water Hygiene Plumber Location: Basildon, Essex Salary/Benefits: 26k - 39k DOE + Training & Benefits One of our clients is seeking a resilient Water Hygiene Plumber, based in the South East of England. Ideally candidates will be qualified with NVQ L2 plumbing and G3 unvented ticket, and will have proven hands-on experience working across a range of sites. You will be expected to hit the ground running, undertaking a range of duties, including: deadleg removals, fault finding and tank refurbishments. This industry leading company can offer competitive salaries and extensive benefits such as: company vehicle, overtime and competitve salaries. Applicants will be considered from: Basildon, Billericay, Brentwood, Romford, Southend-on-Sea, Ilford, Chelmsford, Enfield, Dartford, Gravesend, Chatham, Bromley, Orpington, Wickford, Hockley, South Benfleet, Canvey Island, Grays, Tilbury, Barking, South Woodham Ferrers, Great Baddow, Ingatestone, Snodland, Erith, Sidcup, Croydon. Experience / Qualifications: Experience working as a Water Hygiene Plumber Will hold the City and Guilds or NVQ L2 in Plumbing Beneficial to hold G3 unvented qualification Well versed in ACOP L8 guidelines Proficient in using Microsoft office Strong interpersonal skills Working on a mixed portfolio of client sites The Role: Fault finding with offering diagnosis Pipework installations and modifications CWST refurbishments and installations Servicing of unvented cylinders POU water heater installations Removing deadlegs Producing regular service reports Building strong working relationships with clients Making sure all works are carried out in accordance with relevant health and safety procedures Alternative job titles: Plumber, Remedial Plumber, Legionella Plumber, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Welder Fabricator Spider is advertising on behalf of a family-focused engineering and manufacturing business serving customers across a range of commercial sectors, who are looking for a Welder Fabricator to join their team on a full-time, permanent basis near Ipswich, Suffolk. Fantastic company benefits include: Competitive Salary:£13.00 - £18.00 per hour, depending on experience; overtime is also available and paid at 1.5 times the basic hourly rate Holiday: 20 days annual leave + bank holidays Additional: Company pension scheme About the role: Due to continued growth and expansion, our client is seeking an experienced Welder Fabricator to join their skilled workshop team. Working within a well-established family-run business, you will be involved in the fabrication of commercial vehicle bodies, lifting equipment, and associated structures for a national customer base operating across a variety of transport-related sectors. This is a hands-on role offering variety, stability, and the opportunity to work on a range of bespoke projects from a fully equipped workshop environment. Working hours for this role are: Monday to Thursday, 08 30 and Friday, 08 00 Key Duties include: Fabricate substructures, lifting equipment, and commercial vehicle bodies to required specifications Work on a variety of fabrication projects from the company workshop Interpret and work from technical drawings and project documentation Ensure all work is completed accurately and to agreed project deadlines Maintain high standards of workmanship, quality, and safety throughout all fabrication activities About you As a Welder Fabricator, you will have a minimum of five years' positional MIG welding experience and be confident welding a range of material thicknesses from 1mm to 20mm. You will possess strong fabrication skills, good attention to detail, and the ability to work accurately from technical documentation. You will have basic mathematical and design skills, be reliable, self-motivated, and capable of managing your workload effectively. A full UK driving licence is essential, and applicants must live within a commutable distance of Ipswich. About them: Our client is a successful family-run business with a strong reputation for manufacturing high-quality commercial bodies, lifting equipment, and truck-mounted crane installations. Serving customers nationwide across a range of industries, they pride themselves on delivering quality workmanship, maintaining long-term customer relationships, and creating a supportive working environment where employees are valued and encouraged to develop their skills. If you have the relevant skills and experience for this Welder Fabricator role and would like to be considered, please apply by forwarding an up-to-date CV as soon as possible. We look forward to hearing from you. Please check your email inbox and spam/junk folder for any correspondence for this role. If you require any reasonable adjustments or information in an alternative format, please inform us as soon as possible so that appropriate arrangements can be made. This vacancy is being advertised and handled through Spider, the region s Online Job Advertiser. We take your privacy seriously. When you apply, your details are processed and available for us to directly review for this vacancy. You may be contacted by email, text, or telephone. For full Privacy Policy details please see email correspondence on receipt of your application.

Multiskilled Maintenance Engineer Salary: £44,000 Location: Banbury / Oxfordshire Shift Pattern: Monday to Friday - Double Days (6am to 2pm, 2pm to 10pm) Excellent Benefits Include: Outstanding training & development opportunities Strong pension contribution Life assurance Employee perks & benefits scheme About the Company A highly reputable and financially secure business with a global presence and annual turnover exceeding £100m. As a market leader within their industry, they continue to invest heavily in the latest automation and manufacturing technology. The site is currently undergoing an exciting £8m production line installation project, supporting continued growth across their portfolio of 100+ products supplied to major retailers nationwide. The company is known for investing in its engineers, offering: Ongoing OEM and technical training Further education support through local colleges Health & Safety development programmes Clear opportunities for progression and skill enhancement They are looking for an experienced Multiskilled Maintenance Engineer who wants to make an immediate impact within a growing operation and contribute towards the continued success of the site. The Role Your day-to-day responsibilities as a Maintenance Engineer will include: Working as part of a team of engineers, responsible for the planned and reactive maintenance and service of all the state-of-the-art kit on site, as well as continuous improvement tasks. Working on VFD, Three Phase Motors, working in panels with sensors, relays, contactors, inverters, fuses, power supplies, breakers, switches Reading through electrical schematics, utilizing electrical test equipment such as multi-meters and fault finding on panels. Mechanically replacing worn out parts on the conveyors which will include rollers, bearings and pulleys. Also working on Gearboxes, Shafts, Belts, Pneumatic and Hydraulic systems Swapping both electrical and mechanical components like for like with the odd strip and rebuild project, Working with latest technology working with a CMMS utilising the tablet-based PPM and reactive work The Person To succeed in this role, you should have: A recognised engineering qualification (ideally electrical) Proven maintenance experience in an industrial environment (ideally FMCG, Pharmaceutical, Manufacturing, Heavy Industry a) Strong electrical and mechanical fault-finding skills with a focus on root cause analysis PLC experience Being proactive with the ability to work independently and as part of a team ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Technical Estimator High Security Manchester / Remote £42,000 £47,000 DOE + Company Car or Car Allowance 37 Hours per Week Monday Friday Join a business protecting some of the UK's Most critical environments. My client, a well-established and highly respected specialist security solutions provider is seeking a Technical Estimator to join its growing High Security division. With a long-standing reputation for delivering complex security projects across some of the UK's most demanding and security-sensitive environments, the business combines technical excellence, innovation and collaborative working to deliver exceptional results for its customers. This is an excellent opportunity for an experienced estimator or security systems professional looking to play a key role in the design and delivery of technically robust and commercially successful security solutions. The successful candidate will join a knowledgeable and supportive team where expertise is valued, professional development is encouraged, and employees have the opportunity to contribute to high-profile projects that genuinely make a difference. The Opportunity The Technical Estimator will be responsible for producing accurate, compliant and commercially viable estimates for electronic security system projects. Working closely with commercial, operational and project delivery teams, the successful candidate will bridge the gap between technical design and project execution, ensuring solutions meet customer requirements, industry standards and commercial objectives. This role requires a strong combination of technical understanding, commercial awareness and attention to detail, alongside the ability to develop practical, cost-effective solutions for complex security challenges. Key Responsibilities Prepare detailed cost estimates and technical proposals for electronic security systems, including: Perimeter Intrusion Detection Systems (PIDS) Access Control Systems Associated hardware, software and supporting infrastructure Review tender documentation, specifications and technical drawings to identify project requirements, risks and opportunities Produce technical submissions, including system designs, Bills of Quantities (BoQs), equipment specifications and scope of works documentation Liaise with suppliers and manufacturers to obtain technical information and pricing Ensure proposed solutions meet required standards while delivering best value Collaborate with operational and project delivery teams to ensure estimates are practical, achievable and aligned with installation methodologies Support value engineering and cost optimisation initiatives Maintain estimating databases, pricing tools and costing models Ensure compliance with company procedures, quality standards and health and safety requirements Support pre-sales activities, client engagement and business development opportunities Contribute to the continuous improvement of estimating processes, technical standards and ways of working About the Candidate The ideal candidate will combine strong technical capability with commercial judgement and a proactive, solutions-focused approach. Applicants should possess: Experience in technical estimating, system design or a similar role within the security, construction or related sector Strong knowledge of electronic security systems, particularly PIDS and Access Control Systems CCTV system experience would be advantageous The ability to interpret technical drawings, specifications and tender documentation Excellent analytical and problem-solving skills Strong attention to detail and organisational ability Effective communication and stakeholder management skills Experience using estimating software and Microsoft Office applications A commitment to continuous improvement and delivering high-quality work Willingness to undergo Security Clearance Full UK Driving Licence What's on Offer? Competitive salary of £42,000 £47,000 depending on experience Company Car or Car Allowance Flexible remote working arrangement Opportunity to work on specialist, high-security projects Ongoing training and professional development Supportive and collaborative working environment Long-term career progression opportunities The chance to work alongside experienced industry professionals on technically challenging and rewarding projects This is an excellent opportunity for a Technical Estimator seeking a role where their expertise will be valued, their ideas welcomed, and their contribution recognised. Applications are welcomed from individuals with experience in electronic security systems, technical estimating, system design, access control, perimeter protection, integrated security solutions, defence, infrastructure, utilities, construction and other related sectors.

MK Search have partnered with a leading M&E contractor with a turnover of 400m and a strong presence delivering across sectors who are looking for a mechanical construction manager to join their team on a notable 65m M&E data centre they are delivering in partnership with a leading main contractor in High Wycombe. Reporting to a mechanical project manager, you will join the project from the very beginning of the project as part of a talented team to take control of the complex mechanical package through the delivery phase the PC. Key Responsibilities: Oversee the mechanical installation from pre-construction through to commissioning and handover Manage site teams including supervisors, subcontractors, and specialist packages Ensure works are delivered safely, on programme, and to the highest quality standards Coordinate closely with project managers, planners, and other disciplines (electrical & public health) Drive programme, manage risk, and resolve on-site technical challenges Lead progress meetings and report into senior project leadership Ensure full compliance with HSE regulations and company procedures The project will run for circa 3 years and the company have a busy presence across the region with plan works for many years to come. Sign off to pay a very attractive salary or day rate.

Field Service Engineer, Laboratory Automation Systems Overall Earnings £60,000+ Basic Salary Up To £52,000 Overtime On Call Allowance 10% Bonus Company Car (Electric Or Hybrid) Pension Healthcare Life Insurance Phone, Laptop Holidays The role will involve working one weekend in four (during this week you will receive two alternative days off work) The Role Field Service Engineer, Laboratory Automation Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for: The service, installation, breakdown, repair and calibration of a wide range of sophisticated laboratory diagnostics systems utilised within pathology departments, NHS laboratories and clinical chemistry environments Supporting flow cytometry, cell separation and diagnostics products located at customer sites Your Background Field Service Engineer, Laboratory Automation Systems To apply you should be able to demonstrate the following: A strong background working in a field service or technical support role, gained within an electronics or electro-mechanical service or technical support background Applications are welcomed from a wide variety of backgrounds including high value electronics capital equipment,microscopy, cameras, lasers, x-ray security detection, ex-forces (weapons guidance, radar, avionics or biomedical engineering), medical device, biomedical engineering, pathology laboratory diagnostics and laboratory device Qualified to a minimum ONC / HNC level or above in electronics or another relevant technical discipline Impeccable customer service skills and the ability to remain confident in customer facing environments The Company - Field Service Engineer, Laboratory Automation Systems Instantly recognisable brand leader supplying a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector Their commitment to investment in Research and Development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business.

Junior Telecoms / EPOS Engineer (Full Training) 30,000 (OTE 35,000) + Full Product Training + Career Progression + No Callout + No Weekend + Overtime + Private Healthcare Field based role, covering the South of England, commutable from Crawley, Royal Tunbridge Wells, Croydon, Sevenoaks, Caterham, Redhill and surrounding areas. Are you an aspiring engineer from an Electrical, Telecoms, EPOS, or similar engineering background looking to join a rapidly expanding EPOS specialist who will offer full technical product training, exciting career progression opportunities and give you the opportunity to develop your engineering career while enjoying a great work life balance? This is a great opportunity to join the installation team of a thriving, privately owned SME where you will be able to upskill and progress your career to be a hands on technical expert while maintaining a great work life balance in a Monday to Friday days based role with no callouts and no weekend work. This company manufacture, supply, install and commission a range of technical solutions into commercial facilities such as schools, shops, and hospitals. They have been established for over 10 years and grown to have a strong workforce of over 100 staff. They are privately owned and have a real family feel where everyone is valued, and flexibility is encouraged. On offer is a Junior Engineer position where you will be customer facing and responsible for travelling to customers in the commercial and education sectors to physically install hardware, route cables, configure software and train clients across the equipment. This role would suit an aspiring engineer from an electrical, telecoms, EPOS or similar engineering background that is looking for full technical training to progress their engineering career. The Role: Field Installation Engineer Covering the South of England, regular stays away included Full technical product training The Person: Any experience in electrical industry (Telecoms, Electricians, EPOS, Security or similar) Full UK driving license Willing to cover a large patch and stay away from home Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Maintenance Engineer Clitheroe Up to £49,000 per annum Yolk Recruitment are exclusively supporting a leading manufacturing business in The Northwest to recruit a Multi - Skilled Maintenance Engineer for their high volume production site near Blackburn. This is an excellent opportunity for a time served, multi skilled engineer to join a stable, growing business and play a key role in keeping a modern facility running efficiently. What You'll Do: You will play a key role in keeping a fast-paced manufacturing environment running smoothly and efficiently. Working as part of a skilled engineering team, you will take ownership of both reactive and planned maintenance activities across a range of production and packaging equipment. Carry out both proactive and reactive maintenance on production and packaging machinery Complete planned preventative maintenance to minimise downtime Diagnose and resolve equipment faults quickly and effectively Support production teams to maximise line efficiency and uptime Maintain accurate records of maintenance activities and equipment history Assist with site facilities maintenance and improvement work Contribute to engineering projects including machinery upgrades and installations Manage spare parts and stock levels to ensure availability when needed Work safely at all times, adhering to health and safety procedures Communicate technical issues clearly with internal teams Support continuous improvement initiatives and lead small projects where required What You'll Bring: A relevant engineering qualification such as ONC, HNC or NVQ in Mechanical or Electrical Engineering Experience within a manufacturing, production or FMCG environment Strong fault-finding and problem-solving ability Experience with packaging machinery is highly desirable Excellent organisational skills with the ability to manage multiple priorities Strong communication skills and a collaborative approach Good IT skills with the ability to maintain records and reports A proactive mindset with a willingness to learn and develop Ability to work effectively both independently and as part of a team Why You Should Apply: This is a fantastic opportunity to join a forward-thinking manufacturing business that truly invests in its people. You will benefit from a supportive team environment, ongoing training, and real opportunities for career progression. Competitive salary with shift pattern offering work-life balance Access to a wide range of lifestyle and financial benefits Excellent wellbeing support including mental, physical and financial resources Ongoing training, development and career progression opportunities A positive and inclusive working culture where your contribution is recognised Opportunities to get involved in projects and continuous improvement initiatives Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities!

15 - 18 an hr (DOE), working Monday to Friday 8am -4pm/3.30pm on a Friday (days, no shifts). Overtime being paid at 1.5. The working environment is clean and organised. Location Near Birstall, easily reached from the M62 Corridor (Leeds to Huddersfield) The position offers the opportunity to work for a company that provides excellent training and working conditions. We would be very keen to speak to people who have worked as Apprentice trained or Semi Skilled Fitters that have worked with, plant machninery, vehicles or HGV or PSV fitters, Hydraulics engineers, Coachbuilders, Vehicle Technicians etc The Mechanical Fitter role: Fitting of mechanical installations incorporating hydraulic/pneumatic components to new vehicles. (Full training given as the work is bespoke in nature) The work is varied and interesting a training will give due to the bespoke nature of the work. Mounting products to vehicles in accordance with build instructions Ensuring all products meet all necessary quality requirements Maintaining all necessary documents and records required by the company quality systems Maintaining a high standard of housekeeping Reporting any defects and quality issues immediately to production supervisor/quality engineer Adherence to company health and safety procedures . The role is varied and you would be required to read basic engineering drawings as well as work with your initiative Benefits of the position 15 - 18 an hr DOE Monday to Friday - Early finish on a Friday Friendly team - Good working atmosphere Good holiday and additional company benefits that can be discussed prior to interviewing If you would like a private chat about the role before submitting your application. Please contact Rodger Morley ay E3 Recruitment.

Job Title: Senior Multiskilled Maintenance Engineer Location: Nottingham Salary: £48,000 - £55,000 (DOE) Type: Permanent Full Time Hours: Monday - Friday On-site Benefits: + wellbeing & development budgets, birthday off, team events, and a strong perks package. Overview The Flavour Network are excited to be in close partnership with a fast-growing food manufacturing business to recruit a Senior Multiskilled Maintenance Engineer. This newly created role offers the opportunity to play a key part in developing and scaling the engineering function within a fast-paced environment. As the Senior Multiskilled Maintenance Engineer, you will be responsible for both reactive maintenance and the development of preventive maintenance strategies to improve reliability and reduce downtime. With a high level of autonomy, you ll also have input into tools, equipment, and how machinery evolves as the business grows. Working at the heart of production, you ll collaborate closely with Operations, QA, and Technical teams, supporting day-to-day issues while contributing to longer-term projects such as automation and new equipment commissioning. This is a hands-on, varied role with a mix of mechanical and electrical work, ideal for someone who enjoys problem-solving and improving machinery performance. Key Responsibilities for the Senior Multiskilled Maintenance Engineer: Carry out planned preventative maintenance (PPM) and reactive repairs Diagnose and troubleshoot mechanical and electrical faults across production equipment Support the installation and commissioning of new machinery Maintain accurate records of maintenance activities, repairs, and improvements Work across equipment such as conveyors, chillers, weighers, mixers, and packaging machinery Minimise unplanned downtime through effective and timely problem-solving Ensure compliance with health & safety and food hygiene standards Contribute to continuous improvement initiatives to enhance performance and reliability Provide support and informal mentoring to junior engineers or apprentices Requirements for the Senior Multiskilled Maintenance Engineer: Proven experience in a multi-skilled engineering role within food manufacturing, FMCG, or a similar environment Strong mechanical and electrical fault-finding and repair skills Experience working with PLC-controlled systems, sensors, VFDs, and electrical systems Hands-on experience with welding, fabrication, or machinery modification is advantageous Ability to remain calm under pressure with a proactive, solution-focused mindset Good understanding of health & safety regulations and food hygiene standards Strong communication skills with the ability to collaborate across departments Well-organised with accurate documentation skills Flexibility - occasional weekend or evening work may be required, depending on project requirements If you are a hands-on engineer looking to take ownership in a growing manufacturing environment and play a key role in shaping engineering operations, we would love to hear from you.

An excellent opportunity for an experienced Health & Safety Advisor to join a global engineering and automation business delivering major warehouse automation and intralogistics projects across the UK. The role of Health & Safety Advisor is a site-focused position supporting large-scale construction, mechanical installation and automation projects across the UK. Working closely with project teams, contractors and clients, you will play a key role in ensuring the highest standards of health, safety and environmental compliance throughout project delivery. As a Health & Safety Advisor, you will be responsible for conducting site inspections and audits, supporting risk assessments and method statements, investigating incidents, delivering practical safety guidance and ensuring compliance with company procedures and relevant legislation, including CDM Regulations. You will work closely with Project Managers, Principal Contractors, installation teams and subcontractors, helping to drive a strong and proactive safety culture across multiple project sites. Willingness to travel and stay away from home is essential. This is a home based role, and a central UK location would be ideal to travel UK more easily. Benefits c£55,000 depending on experience Annual bonus scheme Work on complex, high-value, cutting-edge automation projects Real autonomy and opportunity to influence safety standards Key Responsibilities of the Health & Safety Advisor Conduct site inspections, audits and safety reviews Support project teams with risk assessments and safe systems of work Investigate accidents, incidents and near misses Monitor compliance with health, safety and environmental legislation Review contractor documentation and RAMS Attend project and construction coordination meetings Deliver health and safety guidance and training where required Support continuous improvement initiatives across projects Maintain accurate HSE documentation and records Promote best practice across construction and installation activities Requirements NEBOSH General Certificate or NEBOSH Construction Certificate CSCS card or equivalent construction safety qualification Experience within construction, engineering, automation, logistics or industrial projects Strong understanding of CDM Regulations Experience conducting site audits, inspections and incident investigations Excellent communication and stakeholder management skills Experience with Temporary Works, Lifting Operations, Machine Safety or automated handling systems would be advantageous but not essential. Full UK driving licence and willingness to travel and stay away from home This role would suit a Health & Safety Advisor , HSE Advisor, EHS Advisor, CDM Advisor or Construction Safety professional seeking a challenging position within a highly technical engineering environment. Please apply, or contact Stuart Cooper at Wagstaff Recruitment for more information. Wagstaff Recruitment Building Trusted Relationships to Create Great Opportunities

My client, a market leading MEP design Consultancy who specialise in complex MEP designs for varied projects, are searching for a Principal Mechanical Engineer to join their team Birmingham. You will be required to work from the office on a hybrid basis- 2-3 days a week. Flexible working is available and excellent benefits The office is located within commutable distance Birmingham New Street and you will join a supportive and friendly team who work well together in an open plan office. As a Principal Mechanical Engineer you will join an experienced team to complete HVAC designs for healthcare, commercial, residential and industrial developments across the UK. As Principal Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g. Revit, AutoCAD, HAP, or Elite). You will also prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. The role will also involve; -Designing to BIM level 2 in accordance with British Standards PAS 1192-5. -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. - Attend internal external meetings with Clients and Contractors on site to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Liaise with design teams, architectural teams and site engineers to ensure designs are installed to specifications and client requirements. -Client meetings to discuss design briefs and project progress. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary and excellent benefits including; Bonuses, generous annual leave + Christmas off and reduced hours on a Friday, flexibility for families, memberships paid, career progression and varied projects. You will be required to work from the office for 2/3 days a week. You will also have the chance to progress your career, mentor team members and have the option to work on varied projects, alongside an experienced and supportive/friendly team. As a Principal Mechanical Engineer, you will be expected to be close to Chartered status have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs ideally for GP Surgeries and Hospitals using AutoCAD and Revit. You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5, RIBA stage 4 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero and live within commutable distance of Birmingham. If this role is of interest to you, please contact Jordanna Morris at Aztrum for more information regarding the role and team environment.

We are supporting a high-tech manufacturing business looking to hire a hands-on Manufacturing Engineer to support the maintenance and performance of advanced production equipment, including laser systems. This is a great opportunity for someone who enjoys complex fault finding, working at component level, and keeping critical equipment running in a fast-paced environment. Core duties: Maintaining and repairing high-precision production equipment Diagnosing electrical and electronic faults (down to component level) Supporting installation, calibration, and upgrades of equipment Driving improvements in reliability, uptime, and performance About you: Background in electrical/electronic engineering Strong experience in maintenance and fault-finding Comfortable working with complex manufacturing equipment Proactive, problem-solving mindset This is an urgent requirement, and applications will be reviewed at speed. Full job description available on request. Apply today for immediate consideration!

Groundworker Required - Water Treatment Site (13-Week Contract) Location: Lancaster Duration: 13 Weeks Start Date: 15/06/2026 Rate: Competitive (CIS / Ltd / PAYE available) We are currently seeking an experienced Groundworker to join our team on a busy Water Treatment Site for a 13-week project. Role Overview Weeks 1-3: Assisting with and carrying out piling mat works , including preparation, installation, and maintenance in accordance with site specifications. Weeks 4-13: General groundwork duties, including: Drainage installation Ducting and pipework Concrete works Excavation support Kerbing and edging General site preparation and finishing works Requirements Proven experience in groundwork and piling mat construction. Valid CSCS Card (essential). Experience working on civil engineering or water treatment projects preferred. Ability to work safely and effectively within a team. CPCS/NPORS plant tickets advantageous but not essential. What We Offer 13 weeks of continuous work. Competitive rates of pay. Opportunity to work on a major infrastructure project. Immediate start available for the right candidate. To apply, please send your CV Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

UK Health, Safety & Environmental Manager The systems are built. The culture shift is next. Come in and make this role your own. About Joloda Hydraroll Joloda Hydraroll is a global specialist in loading automation and conveyor technology, with manufacturing and engineering operations across the UK. Based in Speke, Liverpool, they design and deliver systems that help household-name logistics and manufacturing clients move goods more efficiently. The team is practical, technically minded, and down to earth. The role This is the number one health and safety position for Joloda s UK operations, covering manufacturing, installation, field service, and office-based activity. Reporting to the Operations Director, your central objective is to continuously drive down accident frequency and severity rates across all areas of the business. You ll maintain and build on the management systems already in place, lead the cultural shift that gets everyone on board, and be the competent person the business relies on when regulators, insurers, or customers require it. The person before you built the structure from the ground up. Your job is to bring it to life and make the numbers move. What you'll do Maintain and continuously improve ISO 14001 and ISO 45001 across UK operations Lead incident investigations, RIDDOR reporting, and corrective action tracking Support manufacturing, installation, and field service teams with RAMS, permits, and site HSE requirements Manage relationships with the HSE, insurers, certification bodies, and key customers Chair Safety and Environmental Committee meetings and manage Management Reviews Deliver toolbox talks, inductions, and briefings that people actually engage with Manage contractor assessment, approval, and on-site monitoring Continuously drive down accident frequency and severity rates in all areas What you'll bring Essential: Proven background in health and safety within manufacturing, engineering, or a similar industrial environment NEBOSH General Certificate Joloda can help you obtain diploma Direct experience dealing with the HSE, insurers, or external auditors Good working knowledge of UK health and safety legislation A fantastic communicator, with the ability to communicate at all levels Useful, not essential: NEBOSH Diploma, or actively working towards it Experience maintaining ISO 14001 and ISO 45001 Multi-site HSE management experience Membership of IOSH, IIRSM, or IEMA Package & working arrangements Financial: £48,000 £55,000, depending on experience. Development : Joloda will sponsor NEBOSH Diploma study, with a clear path to a group-level role for the right person. Flexibility : Split your time between Speke and Anglesey. A company car is provided. Holiday: 25 days + bank holidays. Company pension included. Location : Speke, Liverpool, with weekly travel to Anglesey. Or Anglesey based with weekly travel to Speke. Contract : Permanent Full-time. How to apply If this sounds like the right next move, click to apply and we'll be in touch. Applications are reviewed as they come in.

K-People Europe is a London based recruitment consultancy and we've been recruiting top talents for our clients in UK & Europe since 2007. Our client, an industry leading global manufacturer of imaging solutions, is looking for a Customer Solutions Operations Manager who will be responsible is responsible for identifying, developing, and implementing optimal operational systems to enhance the efficiency, effectiveness, and overall quality of customer service operations, ensuring they reflect the standards, professionalism, and reputation expected of a global market-leading brand. Responsibilities (1) Operational Strategy, System Development & Process Improvement • Design, implement, and continuously improve scalable customer service systems and workflows across internal teams, distributors, and external partners. • Establish structured processes for technical enquiries, service coordination, stock management, quotations, spare parts operations, and customer communication to ensure consistency, accountability, and efficiency. • Develop, implement, and maintain SOPs (Standard Operating Procedures) across Customer Solutions operations to support operational consistency, service quality, and long-term scalability. • Lead the implementation and optimisation of software platforms and digital tools to improve visibility, communication, workflow efficiency, and cross-functional collaboration. • Review and improve service and spare parts pricing structures through operational analysis, market awareness, and business performance evaluation. • Establish structured administrative systems for service scheduling, reporting, coordination, documentation, and operational tracking. • Establish clear operational structures, responsibilities, and workflows between Customer Solutions Operations and the Technical Team to improve efficiency, accountability, and collaboration. • Support the development of a scalable Customer Solutions infrastructure capable of supporting future business growth across the UK and international markets. (2) Customer Solutions Operations & Technical Coordination • Develop a strong operational understanding of technical service activities, including hardware and software installation, system configuration, repair coordination, troubleshooting support, and service administration. • Coordinate customer service and technical support activities in collaboration with the Technical Team to ensure efficient communication, workflow management, and timely issue resolution. • Maintain up-to-date knowledge of industry trends, customer service developments, and operational best practices relevant to technical and customer support operations. • Prepare operational and customer service-related reports for management, HQ, and the European Head Office, including service performance analysis, failure rate reporting, and operational improvement updates. • Support the delivery of dealer and end-user training sessions when required to strengthen operational consistency, product understanding, and customer experience standards. (3) Spare Parts Operations, Commercial Administration & Stock Management • Manage spare parts and consumable operations while continuously improving related workflows and administrative processes. • Oversee quotations, order processing, invoicing, delivery coordination, and associated technical and administrative documentation to ensure operational accuracy and efficiency. • Manage purchasing activities including purchase orders, goods receipt processing, accounts payable invoice posting, and import-related administration. • Manage warranty operations, including warranty parts tracking, claim administration, documentation, and record management to support efficient and accurate warranty processes. • Support commercial performance and service revenue optimisation through effective management of spare parts, consumables, warranty systems, and service administration. • Identify opportunities to improve operational efficiency, stock accuracy, cost control, and service profitability through ongoing process evaluation and workflow improvement initiatives. Requirements (1) Must be fluent in English (2) Minimum of 5 years' experience in customer service operations, stock management, order management, or operational coordination roles. (3) Previous experience within technical service, IT, engineering, electrical, mechanical, or operational support environments is highly desirable. (4) Strong analytical, organisational, and problem-solving capabilities, with the ability to manage multiple priorities in a fast-paced environment while maintaining a high level of accuracy and attention to detail. (5) Strong report writing, administrative, and presentation skills, with proficiency in Microsoft Office applications including Word, Excel, PowerPoint, and Outlook. (6) Experience using CRM platforms, ERP systems, and operational management software. SAP experience is preferred. (7) Ability to build structured systems, improve workflows, and contribute to operational scalability and continuous improvement initiatives. (8) Must have UK driving licence Conditions (1) Job type: Full-time & Permanent & Office based (2) Location: South West London (3) Working hours: 9am - 5:30pm (4) Annual leave: 22 days + Public/Bank holidays (5) Salary: K (depending on experience) Before you apply (1) The right candidate must be eligible to work full-time in UK immediately without any visa restriction. If you're on any visa permitting full-time work in UK, please indicate your visa status in your CV and when it expires. (2) The right candidate must be able to commute to South West London regularly as it's a fully office based role without hybrid option. (3) Please send your CV in MS Word format (4) ONLY right candidates will be contacted, and if your application is successful, we'll contact you within 5 working days.