We are working with a well-established UK-based manufacturer of industrial DC power systems, supporting critical infrastructure across sectors including utilities, transport, and energy worldwide. They are seeking a detail-oriented PCB Assembly Technician to join their Somerset site to support the assembly, inspection, and stock control of printed circuit boards click apply for full job details
Jun 13, 2026
Full time
We are working with a well-established UK-based manufacturer of industrial DC power systems, supporting critical infrastructure across sectors including utilities, transport, and energy worldwide. They are seeking a detail-oriented PCB Assembly Technician to join their Somerset site to support the assembly, inspection, and stock control of printed circuit boards click apply for full job details
Astute's Power team is partnering with a leading Energy from Waste company in the UK to recruit an Electrical Controls and Instrumentation Technician for its site in North Yorkshire. The EC&I Technician role comes with a starting salary of up to £48,000 and a bonus. If you are an apprentice trained EC&I Technician with experience on heavy industrial sites and looking to work then submit your CV to click apply for full job details
Jun 13, 2026
Full time
Astute's Power team is partnering with a leading Energy from Waste company in the UK to recruit an Electrical Controls and Instrumentation Technician for its site in North Yorkshire. The EC&I Technician role comes with a starting salary of up to £48,000 and a bonus. If you are an apprentice trained EC&I Technician with experience on heavy industrial sites and looking to work then submit your CV to click apply for full job details
C&I Technician (Control & Instrumentation) 1 year Contract Oxfordshire IR35: Inside Minimum Requirement: The purpose of this role is primarily expected to provide C&I Technician (Control & Instrumentation) support to the MAST-U facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and fault finding. The Role: Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); to support fault finding and repair work on C&I systems associated with the MAST-U facility. Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Take ownership of technical delivery of tasks. Be capable of undertaking delicate and fragile work e.g., thermocouple connections. Generate and maintain appropriate documentation relevant to the above tasks including writing safe systems of work. Essential Qulations. Apprentice trained with relevant experience working in an industrial environment on 3-phase power systems. C&G2330 Level 3 Certificate in Electrotechnical Technology or equivalent qualifications such as an ONC/HNC in Electrical or Electronic Engineering will be acceptable 18th Edition Wiring Regu
Jun 13, 2026
Seasonal
C&I Technician (Control & Instrumentation) 1 year Contract Oxfordshire IR35: Inside Minimum Requirement: The purpose of this role is primarily expected to provide C&I Technician (Control & Instrumentation) support to the MAST-U facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and fault finding. The Role: Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); to support fault finding and repair work on C&I systems associated with the MAST-U facility. Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Take ownership of technical delivery of tasks. Be capable of undertaking delicate and fragile work e.g., thermocouple connections. Generate and maintain appropriate documentation relevant to the above tasks including writing safe systems of work. Essential Qulations. Apprentice trained with relevant experience working in an industrial environment on 3-phase power systems. C&G2330 Level 3 Certificate in Electrotechnical Technology or equivalent qualifications such as an ONC/HNC in Electrical or Electronic Engineering will be acceptable 18th Edition Wiring Regu
Electrical, Control & Instrumentation Engineer Energy from Waste £60,000 £65,000 + annual bonus Cardiff, South Wales SCINERGY Recruitment are supporting a leading Energy from Waste facility in Cardiff with the appointment of an experienced Electrical, Control & Instrumentation Engineer. Based at Trident Park, this is a major Energy Recovery Facility processing around 425,000 tonnes of waste each year, generating enough energy to power the equivalent of 98,280 homes, and helping divert 95% of South Wales residual waste away from landfill. This is a key site-based role focused on plant availability, safe maintenance delivery, asset performance, and the ongoing improvement of EC&I systems across a critical operational energy facility. What you ll be doing day to day: Taking responsibility for EC&I engineering and maintenance across the plant, ensuring electrical, control and instrumentation systems are maintained to a high standard and support long-term site availability. Coordinating, scheduling and planning maintenance activity across planned and unplanned shutdowns, including work on key systems such as HV equipment, CEMS and associated plant infrastructure. Managing the EC&I maintenance workshop, supporting technicians and apprentices, and working closely with mechanical, operations and central engineering teams to deliver robust engineering solutions. Ensuring the maintenance management system is used effectively, statutory inspections are completed, documentation is kept up to date, and plant modifications follow the correct engineering change process. Maintaining a strong focus on health, safety and environmental standards, including safe systems of work, contractor control, site inductions and ensuring all activities are carried out safely and compliantly. What you ll need: Strong EC&I maintenance experience gained within a power, process, Energy from Waste, heavy industrial or similar operational plant environment. A HNC/ONC or equivalent engineering qualification, with the skills and experience to work on LV and HV electrical systems. Senior Authorised Person capability would be highly desirable. A good working knowledge of electrical, controls and instrumentation equipment, including repair methods, preventative maintenance systems and fault-finding on critical plant assets. Experience working with Distributed Control Systems such as Siemens, Valmet or similar, alongside a solid understanding of plant isolations, permit systems and safe systems of work. Previous experience supervising technicians, contractors or maintenance teams, with the ability to coordinate work activity and support delivery against agreed KPIs. To apply or to find out more, contact Steve or Callum at SCINERGY Recruitment on (phone number removed) or email (url removed)
Jun 13, 2026
Full time
Electrical, Control & Instrumentation Engineer Energy from Waste £60,000 £65,000 + annual bonus Cardiff, South Wales SCINERGY Recruitment are supporting a leading Energy from Waste facility in Cardiff with the appointment of an experienced Electrical, Control & Instrumentation Engineer. Based at Trident Park, this is a major Energy Recovery Facility processing around 425,000 tonnes of waste each year, generating enough energy to power the equivalent of 98,280 homes, and helping divert 95% of South Wales residual waste away from landfill. This is a key site-based role focused on plant availability, safe maintenance delivery, asset performance, and the ongoing improvement of EC&I systems across a critical operational energy facility. What you ll be doing day to day: Taking responsibility for EC&I engineering and maintenance across the plant, ensuring electrical, control and instrumentation systems are maintained to a high standard and support long-term site availability. Coordinating, scheduling and planning maintenance activity across planned and unplanned shutdowns, including work on key systems such as HV equipment, CEMS and associated plant infrastructure. Managing the EC&I maintenance workshop, supporting technicians and apprentices, and working closely with mechanical, operations and central engineering teams to deliver robust engineering solutions. Ensuring the maintenance management system is used effectively, statutory inspections are completed, documentation is kept up to date, and plant modifications follow the correct engineering change process. Maintaining a strong focus on health, safety and environmental standards, including safe systems of work, contractor control, site inductions and ensuring all activities are carried out safely and compliantly. What you ll need: Strong EC&I maintenance experience gained within a power, process, Energy from Waste, heavy industrial or similar operational plant environment. A HNC/ONC or equivalent engineering qualification, with the skills and experience to work on LV and HV electrical systems. Senior Authorised Person capability would be highly desirable. A good working knowledge of electrical, controls and instrumentation equipment, including repair methods, preventative maintenance systems and fault-finding on critical plant assets. Experience working with Distributed Control Systems such as Siemens, Valmet or similar, alongside a solid understanding of plant isolations, permit systems and safe systems of work. Previous experience supervising technicians, contractors or maintenance teams, with the ability to coordinate work activity and support delivery against agreed KPIs. To apply or to find out more, contact Steve or Callum at SCINERGY Recruitment on (phone number removed) or email (url removed)
I'm currently supporting a leading COMAH-regulated chemical manufacturing organisation, who are looking to recruit an experienced E&I Technician. This is a key role supporting the safe, reliable, and compliant operation of plant equipment within a complex industrial environment. Key Responsibilities Perform planned preventive and reactive maintenance on electrical, control, and instrumentation syste click apply for full job details
Jun 13, 2026
Full time
I'm currently supporting a leading COMAH-regulated chemical manufacturing organisation, who are looking to recruit an experienced E&I Technician. This is a key role supporting the safe, reliable, and compliant operation of plant equipment within a complex industrial environment. Key Responsibilities Perform planned preventive and reactive maintenance on electrical, control, and instrumentation syste click apply for full job details
Quality Control Manager Foundry Manufacturing £50,000 Are you a hands-on Quality professional who enjoys solving problems on the shop floor rather than from behind a desk? Do you have foundry or heavy manufacturing experience and want the opportunity to shape the future of a growing quality function while working closely with customers, production teams, and senior leadership? Our client is a successful and rapidly expanding UK manufacturing business supplying high-integrity cast components into demanding industrial sectors worldwide. Following significant growth and continued investment, they are now looking to appoint an experienced Quality Control Manager to play a key role in the transformation of their quality department. This is far more than a traditional quality role. It's an opportunity to become the vital link between customers, production, sales, and quality, helping drive standards, solve problems, and improve performance across the business. The Opportunity The business is currently investing heavily in its quality structure, with a new Quality Assurance Manager joining the team and a clear strategy to separate quality process management from product quality ownership. As Quality Control Manager, you will take ownership of product quality throughout the manufacturing process and lead a team of Quality Engineers and Technicians. Working alongside the QA Manager, Production teams and Directors, you'll be instrumental in reducing defects, improving customer satisfaction, and embedding a proactive quality culture throughout the operation. This is a highly visible position with direct access to senior leadership and the opportunity to influence how quality is managed across the business. What You'll Be Doing - Leading day-to-day quality control activities across multiple manufacturing areas. - Acting as the key liaison between customers, production, quality and sales teams. - Managing and developing a quality team with direct responsibility for approximately 8-12 personnel and wider influence across a larger team. - Investigating customer complaints, returns and quality concerns through structured root cause analysis. - Working directly with production teams to identify, implement and verify corrective actions. - Driving improvements in casting quality, process control and defect reduction. - Leading product quality initiatives throughout core making, moulding, melting, pouring, finishing and final inspection operations. - Conducting internal audits and supporting customer and supplier audit activities. - Visiting customers where required to understand issues firsthand and strengthen customer relationships. - Monitoring quality data, trends and KPIs to identify improvement opportunities. - Supporting continuous improvement initiatives and helping embed best practice throughout the business. This Is A Hands-On Role Success in this position will come from being visible, approachable and actively involved in the manufacturing process. We're looking for someone who enjoys spending time on the shop floor, engaging with operators, understanding challenges at source and driving practical solutions. Approximately 60% or more of your time will be spent within the production environment, working closely with teams and supporting improvements where they matter most. If you're looking for a purely office-based quality role, this won't be the right fit. What We're Looking For - Previous experience within a Quality Management, Senior Quality Engineer or Quality Supervisor position. - Strong foundry, castings, metals, heavy manufacturing or similar process industry experience. - Sound understanding of ductile iron casting processes and quality control principles. - Proven ability to lead investigations and deliver effective root cause analysis. - Experience dealing directly with customers and managing quality-related relationships. - Strong communication skills with the ability to influence stakeholders at all levels. - Experience conducting audits and working within ISO quality management systems. - A proactive, solutions-focused approach with a willingness to get involved and lead from the front. Desirable Experience - Qualified Internal Auditor or Lead Auditor. - Six Sigma Yellow Belt or similar continuous improvement qualification. - First Aid qualification. - Experience within high-integrity castings or critical component manufacturing. Why Join? - Opportunity to play a leading role in a significant quality transformation programme. - Join a business experiencing substantial and sustained growth. - Work directly with senior leadership and have genuine influence on business performance. - Strong long-term career progression opportunities within the organisation. - Established support network including a new Quality Assurance Manager and experienced leadership team. - High levels of job security supported by a strong order book and long-term customer relationships. - Opportunity to work with globally recognised industrial customers. - Competitive salary of £50,000 plus benefits. The Culture The business prides itself on investing in its people and creating long-term careers. The interview process is designed to be conversational and collaborative, focusing on finding the right individual rather than putting candidates under pressure. For an ambitious quality professional looking to take the next step in their career and make a genuine impact, this represents an outstanding opportunity.
Jun 13, 2026
Full time
Quality Control Manager Foundry Manufacturing £50,000 Are you a hands-on Quality professional who enjoys solving problems on the shop floor rather than from behind a desk? Do you have foundry or heavy manufacturing experience and want the opportunity to shape the future of a growing quality function while working closely with customers, production teams, and senior leadership? Our client is a successful and rapidly expanding UK manufacturing business supplying high-integrity cast components into demanding industrial sectors worldwide. Following significant growth and continued investment, they are now looking to appoint an experienced Quality Control Manager to play a key role in the transformation of their quality department. This is far more than a traditional quality role. It's an opportunity to become the vital link between customers, production, sales, and quality, helping drive standards, solve problems, and improve performance across the business. The Opportunity The business is currently investing heavily in its quality structure, with a new Quality Assurance Manager joining the team and a clear strategy to separate quality process management from product quality ownership. As Quality Control Manager, you will take ownership of product quality throughout the manufacturing process and lead a team of Quality Engineers and Technicians. Working alongside the QA Manager, Production teams and Directors, you'll be instrumental in reducing defects, improving customer satisfaction, and embedding a proactive quality culture throughout the operation. This is a highly visible position with direct access to senior leadership and the opportunity to influence how quality is managed across the business. What You'll Be Doing - Leading day-to-day quality control activities across multiple manufacturing areas. - Acting as the key liaison between customers, production, quality and sales teams. - Managing and developing a quality team with direct responsibility for approximately 8-12 personnel and wider influence across a larger team. - Investigating customer complaints, returns and quality concerns through structured root cause analysis. - Working directly with production teams to identify, implement and verify corrective actions. - Driving improvements in casting quality, process control and defect reduction. - Leading product quality initiatives throughout core making, moulding, melting, pouring, finishing and final inspection operations. - Conducting internal audits and supporting customer and supplier audit activities. - Visiting customers where required to understand issues firsthand and strengthen customer relationships. - Monitoring quality data, trends and KPIs to identify improvement opportunities. - Supporting continuous improvement initiatives and helping embed best practice throughout the business. This Is A Hands-On Role Success in this position will come from being visible, approachable and actively involved in the manufacturing process. We're looking for someone who enjoys spending time on the shop floor, engaging with operators, understanding challenges at source and driving practical solutions. Approximately 60% or more of your time will be spent within the production environment, working closely with teams and supporting improvements where they matter most. If you're looking for a purely office-based quality role, this won't be the right fit. What We're Looking For - Previous experience within a Quality Management, Senior Quality Engineer or Quality Supervisor position. - Strong foundry, castings, metals, heavy manufacturing or similar process industry experience. - Sound understanding of ductile iron casting processes and quality control principles. - Proven ability to lead investigations and deliver effective root cause analysis. - Experience dealing directly with customers and managing quality-related relationships. - Strong communication skills with the ability to influence stakeholders at all levels. - Experience conducting audits and working within ISO quality management systems. - A proactive, solutions-focused approach with a willingness to get involved and lead from the front. Desirable Experience - Qualified Internal Auditor or Lead Auditor. - Six Sigma Yellow Belt or similar continuous improvement qualification. - First Aid qualification. - Experience within high-integrity castings or critical component manufacturing. Why Join? - Opportunity to play a leading role in a significant quality transformation programme. - Join a business experiencing substantial and sustained growth. - Work directly with senior leadership and have genuine influence on business performance. - Strong long-term career progression opportunities within the organisation. - Established support network including a new Quality Assurance Manager and experienced leadership team. - High levels of job security supported by a strong order book and long-term customer relationships. - Opportunity to work with globally recognised industrial customers. - Competitive salary of £50,000 plus benefits. The Culture The business prides itself on investing in its people and creating long-term careers. The interview process is designed to be conversational and collaborative, focusing on finding the right individual rather than putting candidates under pressure. For an ambitious quality professional looking to take the next step in their career and make a genuine impact, this represents an outstanding opportunity.
Are you looking to build a long-term career with a market-leading manufacturer that combines innovation, sustainability, and investment in its people? We are recruiting on behalf of a highly respected industry leader with a strong reputation for quality, operational excellence, and environmental responsibility. This is an exciting opportunity to join a forward-thinking organisation where your contribution will be valued, your development supported, and your career given every opportunity to grow. As part of the Maintenance team, we are looking for a Multi-Skilled Maintenance Technician. This role will assist in fault diagnosis and repair activities on key technical process equipment and provide support to production teams on technical process equipment as required. They will work closely with all staff in each area to ensure the smooth running of core business plant, optimising the productivity of machinery, equipment, proactively working to eliminate plant downtime and make improvements to the processes and ensuring the site and facility infrastructure is tested and maintained in accordance with current legislation. Key skills for this role include - Qualified time served dual trained electrical / mechanical engineer with relevant experience in an industrial environment Analytical capacity to identify and address technical issues/opportunities which can impact upon production and quality C&G/NVQ Qualification or equivalent Edition Qualification required Experience of motor controls, temperature and pressure sensing and control systems Experience of planned preventative maintenance systems Experience in troubleshooting, installation, fault finding, and repairs Able to read electrical drawings for fault diagnosis and isolation of circuits Computer literate Knowledge of working with and relacing/repairing Bearings, Belt drives, Couplings, Chain Conveyors, Elevators, pumps, motors, gearboxes and pneumatic / hydraulic systems. To discuss in more detail and obtain the full job description please contact Lyndsey
Jun 13, 2026
Full time
Are you looking to build a long-term career with a market-leading manufacturer that combines innovation, sustainability, and investment in its people? We are recruiting on behalf of a highly respected industry leader with a strong reputation for quality, operational excellence, and environmental responsibility. This is an exciting opportunity to join a forward-thinking organisation where your contribution will be valued, your development supported, and your career given every opportunity to grow. As part of the Maintenance team, we are looking for a Multi-Skilled Maintenance Technician. This role will assist in fault diagnosis and repair activities on key technical process equipment and provide support to production teams on technical process equipment as required. They will work closely with all staff in each area to ensure the smooth running of core business plant, optimising the productivity of machinery, equipment, proactively working to eliminate plant downtime and make improvements to the processes and ensuring the site and facility infrastructure is tested and maintained in accordance with current legislation. Key skills for this role include - Qualified time served dual trained electrical / mechanical engineer with relevant experience in an industrial environment Analytical capacity to identify and address technical issues/opportunities which can impact upon production and quality C&G/NVQ Qualification or equivalent Edition Qualification required Experience of motor controls, temperature and pressure sensing and control systems Experience of planned preventative maintenance systems Experience in troubleshooting, installation, fault finding, and repairs Able to read electrical drawings for fault diagnosis and isolation of circuits Computer literate Knowledge of working with and relacing/repairing Bearings, Belt drives, Couplings, Chain Conveyors, Elevators, pumps, motors, gearboxes and pneumatic / hydraulic systems. To discuss in more detail and obtain the full job description please contact Lyndsey
HV Technician Field Based About the Role: We are currently seeking a HV Technician, you will be responsible for wiring, installing, and testing HV systems across various industrial and utility projects. Key Responsibilities: Install and terminate HV cables and control wiring on 33kV+ systems. Read and interpret electrical schematics and layout drawings. Work with switchgear, transformers, and protection panels. Carry out testing and commissioning alongside engineering teams. Maintain compliance with HSE standards and electrical safety regulations. Complete job documentation and site reports. Requirements: Experience working on high voltage networks. Recognised electrical qualifications (e.g. NVQ Level 3, C&G 2365/2357). Experience in substations and HV environments. Strong knowledge of control, protection, and HV equipment. Full UK driving licence. HV Technician - Field Based Job Type: Full-time / Permanent Salary: £50,000 - £60,000 Start Date: Immediate / ASAP To discuss this opportunity further, please click Apply Now for a no obligation chat with your VIQU Energy consultant. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU Energy offers an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). HV Technician Field Based
Jun 13, 2026
Full time
HV Technician Field Based About the Role: We are currently seeking a HV Technician, you will be responsible for wiring, installing, and testing HV systems across various industrial and utility projects. Key Responsibilities: Install and terminate HV cables and control wiring on 33kV+ systems. Read and interpret electrical schematics and layout drawings. Work with switchgear, transformers, and protection panels. Carry out testing and commissioning alongside engineering teams. Maintain compliance with HSE standards and electrical safety regulations. Complete job documentation and site reports. Requirements: Experience working on high voltage networks. Recognised electrical qualifications (e.g. NVQ Level 3, C&G 2365/2357). Experience in substations and HV environments. Strong knowledge of control, protection, and HV equipment. Full UK driving licence. HV Technician - Field Based Job Type: Full-time / Permanent Salary: £50,000 - £60,000 Start Date: Immediate / ASAP To discuss this opportunity further, please click Apply Now for a no obligation chat with your VIQU Energy consultant. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU Energy offers an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). HV Technician Field Based
Maintenance Electrical Technician Weekend Shift Location: Poole Company Overview Our client is a well-established and highly successful manufacturing business operating within a continuous process production environment. They are recognised for their technical excellence, investment in advanced engineering solutions, and commitment to maintaining high standards across safety, quality, and operational performance. The organisation offers a stable and supportive working environment, with ongoing training and development opportunities for skilled engineers. The Role An opportunity has arisen for a Maintenance Electrical Technician to join a skilled maintenance team within a fast-paced production facility. This role is critical in ensuring the reliability and efficiency of plant operations through proactive maintenance, fault finding, and continuous improvement activities. The successful candidate will adopt a multi-skilled approach, working both independently and collaboratively to diagnose and resolve electrical issues within time-sensitive production constraints. Key Responsibilities Carry out planned and reactive electrical maintenance across site equipment Diagnose and rectify faults on complex electrical systems using technical drawings Work on PLC-controlled systems managing hydraulic and pneumatic circuits Perform electrical installation work as required Ensure minimal downtime through efficient fault resolution Maintain high standards of health and safety compliance at all times Contribute to continuous improvement and reliability initiatives Key Requirements NVQ Level 3 in Electrical Engineering (or equivalent) Proven experience in electrical fault finding within a manufacturing or industrial environment Ability to read and interpret electrical drawings and schematics Experience working with PLC-controlled systems (desirable) Strong understanding of health and safety regulations Ability to work independently and as part of a team Ideally currently working in a Maintenance Electrical Technician role Benefits 211 hours annual leave Contributory pension scheme Life assurance Paid overtime opportunities Cycle to work scheme Health cash plan (post-probation) Employee of the Month scheme (£100 reward voucher) Ongoing training and development opportunities Salary & Hours Salary: £50,775 per annum (rising to £52,517 after probation) OTE: c.£62,000+ per annum (based on typical overtime) Working Hours (32 hours per week): Week 1: Saturday & Sunday: 10:00am 10:00pm (2 x 12-hour shifts) Friday: 2:00pm 10:00pm (1 x 8-hour shift) Week 2: Friday & Saturday: 10:00pm 10:00am (2 x 12-hour shifts) Sunday: 10:00pm 6:00am (1 x 8-hour shift) This is an excellent opportunity for a skilled Electrical Technician seeking a stable weekend-focused role within a high-performing engineering environment. If this role is of interest, please press apply or get in touch with Ryan Guy on (url removed) or (phone number removed).
Jun 12, 2026
Full time
Maintenance Electrical Technician Weekend Shift Location: Poole Company Overview Our client is a well-established and highly successful manufacturing business operating within a continuous process production environment. They are recognised for their technical excellence, investment in advanced engineering solutions, and commitment to maintaining high standards across safety, quality, and operational performance. The organisation offers a stable and supportive working environment, with ongoing training and development opportunities for skilled engineers. The Role An opportunity has arisen for a Maintenance Electrical Technician to join a skilled maintenance team within a fast-paced production facility. This role is critical in ensuring the reliability and efficiency of plant operations through proactive maintenance, fault finding, and continuous improvement activities. The successful candidate will adopt a multi-skilled approach, working both independently and collaboratively to diagnose and resolve electrical issues within time-sensitive production constraints. Key Responsibilities Carry out planned and reactive electrical maintenance across site equipment Diagnose and rectify faults on complex electrical systems using technical drawings Work on PLC-controlled systems managing hydraulic and pneumatic circuits Perform electrical installation work as required Ensure minimal downtime through efficient fault resolution Maintain high standards of health and safety compliance at all times Contribute to continuous improvement and reliability initiatives Key Requirements NVQ Level 3 in Electrical Engineering (or equivalent) Proven experience in electrical fault finding within a manufacturing or industrial environment Ability to read and interpret electrical drawings and schematics Experience working with PLC-controlled systems (desirable) Strong understanding of health and safety regulations Ability to work independently and as part of a team Ideally currently working in a Maintenance Electrical Technician role Benefits 211 hours annual leave Contributory pension scheme Life assurance Paid overtime opportunities Cycle to work scheme Health cash plan (post-probation) Employee of the Month scheme (£100 reward voucher) Ongoing training and development opportunities Salary & Hours Salary: £50,775 per annum (rising to £52,517 after probation) OTE: c.£62,000+ per annum (based on typical overtime) Working Hours (32 hours per week): Week 1: Saturday & Sunday: 10:00am 10:00pm (2 x 12-hour shifts) Friday: 2:00pm 10:00pm (1 x 8-hour shift) Week 2: Friday & Saturday: 10:00pm 10:00am (2 x 12-hour shifts) Sunday: 10:00pm 6:00am (1 x 8-hour shift) This is an excellent opportunity for a skilled Electrical Technician seeking a stable weekend-focused role within a high-performing engineering environment. If this role is of interest, please press apply or get in touch with Ryan Guy on (url removed) or (phone number removed).
Working on behalf of our client based on Isle of Grain. We are currently recruiting for a C&I Technician on a permanent basis. This is an excellent opportunity for a skilled professional with a strong background in control and instrumentation within an industrial or process environment. Key Duties: Carry out fault finding and rectification on electrical equipment Perform breakdown repairs and reactive click apply for full job details
Jun 12, 2026
Full time
Working on behalf of our client based on Isle of Grain. We are currently recruiting for a C&I Technician on a permanent basis. This is an excellent opportunity for a skilled professional with a strong background in control and instrumentation within an industrial or process environment. Key Duties: Carry out fault finding and rectification on electrical equipment Perform breakdown repairs and reactive click apply for full job details
FULCRUM RECRUITMENT LIMITED
Newcastle Upon Tyne, Tyne And Wear
Associate / Senior Civil Engineer / Team Leader Location: Gateshead, Tyne and Wear Employment Type: Permanent Salary: Competitive salary + benefits Sector: Civil Engineering / Structural Engineering Consultancy Fulcrum Recruitment is working with a well-established civil and structural engineering consultancy based in Gateshead that is looking to appoint an Associate / Senior Civil Engineer / Team Leader. This is a senior opportunity for an experienced and commercially aware Civil Engineer to lead and develop a Civil Engineering team within a respected regional consultancy. The business delivers practical, commercially aware and cost-effective engineering solutions across a wide range of sectors, including housing, industrial, commercial, retail, healthcare, leisure and wider development schemes. Please note this role is fully office-based in Gateshead and does not offer hybrid working. Candidates should therefore be within a realistic daily commute of the office. The business does offer flexible working hours and operates a 4.5-day working week, finishing at 12:30pm on a Friday. The Role As Associate / Senior Civil Engineer / Team Leader, you will play a key role in leading the Civil Engineering team, overseeing technical delivery, managing workloads and supporting the future growth of the business. You will be responsible for the successful delivery of civil engineering projects from concept through to construction, while maintaining strong client relationships and ensuring technical standards, commercial performance and team development are properly managed. The role would suit a Senior Civil Engineer, Associate Civil Engineer or experienced Team Leader who is confident balancing technical design, people management, client engagement and commercial responsibility. Project Types The consultancy works across a varied portfolio of projects, including social and private housing, industrial and commercial developments, retail schemes, healthcare projects, leisure schemes, refurbishment works and new-build developments. The Civil Engineering team is involved in infrastructure design, drainage, highways, external works, Section Agreements, technical approvals, reports, calculations and construction-stage support. Most work is delivered across the North East, with selected projects in other locations where required. Key Responsibilities Lead and manage civil engineering projects from concept design through to planning, tender, construction and completion. Oversee and review drawings, reports, calculations, technical submissions and project information. Manage team workload, project resourcing, delegation, delivery standards and staff development. Support Section Agreements, technical approvals, drainage design, highway design and related infrastructure submissions. Attend client, consultant, contractor and site meetings, representing the business professionally. Support commercial performance, including fee proposals, variations, change control, invoicing and additional fee requests. Build and maintain strong relationships with clients, consultants and contractors while contributing to business development, bids and growth planning. Promote a positive team culture aligned with quality, collaboration, technical excellence and continuous improvement. Candidate Requirements Chartered Engineer, or working towards chartership, with significant post-qualification experience in a civil engineering consultancy environment. Proven experience in a senior civil engineering role, ideally with responsibility for technical delivery, client relationships and team leadership. Strong ability to produce and review drainage and highway drawings, design calculations, technical reports and site appraisals. Good knowledge of UK planning procedures and relevant design standards, including Water UK, Sewerage Sector Guidance, Manual for Streets, DMRB and Local Authority Design Guidance. Working knowledge of technical software such as AutoCAD, Causeway Flow, Causeway Live or similar design packages. Strong commercial awareness, with experience of fee management, change control, project resourcing and client-facing delivery. Excellent communication, leadership and engagement skills, with the ability to mentor, manage and develop engineers and technicians. Existing right to work in the UK is required, as the company is not currently able to offer visa sponsorship. The Opportunity This is an excellent opportunity to join a friendly, professional and well-regarded consultancy where you can take real ownership, influence the future of the Civil Engineering team and contribute to the continued growth of the business. The role offers a strong mix of technical leadership, team management, client engagement and commercial responsibility, making it particularly suitable for someone looking for a senior, visible and influential position. The company has a collaborative working culture, a strong North East client base and a varied project portfolio across housing, commercial, industrial, retail, healthcare and leisure sectors. Package The package includes a competitive salary and wider benefits. The business offers flexible working hours, a 4.5-day working week, a 12:30pm finish each Friday, pension enrolment, discretionary bonus scheme, death in service benefit, permanent health scheme, employee assistance programme, professional development support, free eye tests and holiday entitlement that increases with service. For further information on this opportunity, please contact David Fletcher of Fulcrum Recruitment.
Jun 12, 2026
Full time
Associate / Senior Civil Engineer / Team Leader Location: Gateshead, Tyne and Wear Employment Type: Permanent Salary: Competitive salary + benefits Sector: Civil Engineering / Structural Engineering Consultancy Fulcrum Recruitment is working with a well-established civil and structural engineering consultancy based in Gateshead that is looking to appoint an Associate / Senior Civil Engineer / Team Leader. This is a senior opportunity for an experienced and commercially aware Civil Engineer to lead and develop a Civil Engineering team within a respected regional consultancy. The business delivers practical, commercially aware and cost-effective engineering solutions across a wide range of sectors, including housing, industrial, commercial, retail, healthcare, leisure and wider development schemes. Please note this role is fully office-based in Gateshead and does not offer hybrid working. Candidates should therefore be within a realistic daily commute of the office. The business does offer flexible working hours and operates a 4.5-day working week, finishing at 12:30pm on a Friday. The Role As Associate / Senior Civil Engineer / Team Leader, you will play a key role in leading the Civil Engineering team, overseeing technical delivery, managing workloads and supporting the future growth of the business. You will be responsible for the successful delivery of civil engineering projects from concept through to construction, while maintaining strong client relationships and ensuring technical standards, commercial performance and team development are properly managed. The role would suit a Senior Civil Engineer, Associate Civil Engineer or experienced Team Leader who is confident balancing technical design, people management, client engagement and commercial responsibility. Project Types The consultancy works across a varied portfolio of projects, including social and private housing, industrial and commercial developments, retail schemes, healthcare projects, leisure schemes, refurbishment works and new-build developments. The Civil Engineering team is involved in infrastructure design, drainage, highways, external works, Section Agreements, technical approvals, reports, calculations and construction-stage support. Most work is delivered across the North East, with selected projects in other locations where required. Key Responsibilities Lead and manage civil engineering projects from concept design through to planning, tender, construction and completion. Oversee and review drawings, reports, calculations, technical submissions and project information. Manage team workload, project resourcing, delegation, delivery standards and staff development. Support Section Agreements, technical approvals, drainage design, highway design and related infrastructure submissions. Attend client, consultant, contractor and site meetings, representing the business professionally. Support commercial performance, including fee proposals, variations, change control, invoicing and additional fee requests. Build and maintain strong relationships with clients, consultants and contractors while contributing to business development, bids and growth planning. Promote a positive team culture aligned with quality, collaboration, technical excellence and continuous improvement. Candidate Requirements Chartered Engineer, or working towards chartership, with significant post-qualification experience in a civil engineering consultancy environment. Proven experience in a senior civil engineering role, ideally with responsibility for technical delivery, client relationships and team leadership. Strong ability to produce and review drainage and highway drawings, design calculations, technical reports and site appraisals. Good knowledge of UK planning procedures and relevant design standards, including Water UK, Sewerage Sector Guidance, Manual for Streets, DMRB and Local Authority Design Guidance. Working knowledge of technical software such as AutoCAD, Causeway Flow, Causeway Live or similar design packages. Strong commercial awareness, with experience of fee management, change control, project resourcing and client-facing delivery. Excellent communication, leadership and engagement skills, with the ability to mentor, manage and develop engineers and technicians. Existing right to work in the UK is required, as the company is not currently able to offer visa sponsorship. The Opportunity This is an excellent opportunity to join a friendly, professional and well-regarded consultancy where you can take real ownership, influence the future of the Civil Engineering team and contribute to the continued growth of the business. The role offers a strong mix of technical leadership, team management, client engagement and commercial responsibility, making it particularly suitable for someone looking for a senior, visible and influential position. The company has a collaborative working culture, a strong North East client base and a varied project portfolio across housing, commercial, industrial, retail, healthcare and leisure sectors. Package The package includes a competitive salary and wider benefits. The business offers flexible working hours, a 4.5-day working week, a 12:30pm finish each Friday, pension enrolment, discretionary bonus scheme, death in service benefit, permanent health scheme, employee assistance programme, professional development support, free eye tests and holiday entitlement that increases with service. For further information on this opportunity, please contact David Fletcher of Fulcrum Recruitment.
Are you a Senior Engineer looking to take that next step in your career with one of the UKs best and most established engineering Facilities Management companies? If so, this a rare opportunity to join their team in a engineering management role. Why would you consider working for this business? They are profitable, expanding, investing in people's careers and offer a highly competitive salary and benefits package of over 55,000, a company car with fuel card, company pension scheme of up to 6% of your salary and an annual bonus. You'll be working with other members of the team, as well as by yourself, taking calls when other issues arise and attending big names retailers and distribution centres. It's fast paced and each working day is never the same. Now really is a fantastic time to be joining a rapidly growing business that is quickly becoming the "go-to" company within their field. Responsibilities of a Senior Door Engineer You'll be reporting to the Doors and Security Manager and be expected to be in control of the maintenance, service, and repairs of automatic swing and sliding automated entrance systems as well as Industrial doors within a local postcode area. Other technicians will call if they have issues, and you'll play a key part in arranging future interviews for potential new members of staff. Each day you'll also be working with an assortment of equipment from Automatic Doors to Industrial roller shutters, You will be expected to manage your own work in progress, ensure all relevant paperwork is completed accurately, whilst communicating with your line manager of any issues the area is experiencing. You'll attend regular training courses and management meetings whilst being an active team player sustaining the company's fantastic reputation and future growth. Essential requirements of a successful Senior Door Engineer EN16005, IPAF, PASMA Previous practical experience working on swing, sliding entrance systems and industrial door systems Confident in your product knowledge and able to offer advice to other quickly when required Electrical, welding or hydraulics experience Strong leadership skills Working to deadlines and time management Problem solving Salary and Benefits for a Senior Door Engineer: Attractive starting salary package of 55,500 basic OTE circa 65k+ in your first year Overtime rates paid at 1.5 minimum Paid from when you leave home to when you return home and attending office On-call support for the team and attend if necessary Company vehicle and fuel card 25 days annual leave and 8 bank holidays (33 total) Company pension scheme Company performance related bonus worth thousands. PPE and Uniform supplied Ongoing manufacturer and people management training If you're interested in this Senior Door Engineer opportunity and looking to join a leader in their field, This could be the perfect opportunity for you. Apply now!
Jun 12, 2026
Full time
Are you a Senior Engineer looking to take that next step in your career with one of the UKs best and most established engineering Facilities Management companies? If so, this a rare opportunity to join their team in a engineering management role. Why would you consider working for this business? They are profitable, expanding, investing in people's careers and offer a highly competitive salary and benefits package of over 55,000, a company car with fuel card, company pension scheme of up to 6% of your salary and an annual bonus. You'll be working with other members of the team, as well as by yourself, taking calls when other issues arise and attending big names retailers and distribution centres. It's fast paced and each working day is never the same. Now really is a fantastic time to be joining a rapidly growing business that is quickly becoming the "go-to" company within their field. Responsibilities of a Senior Door Engineer You'll be reporting to the Doors and Security Manager and be expected to be in control of the maintenance, service, and repairs of automatic swing and sliding automated entrance systems as well as Industrial doors within a local postcode area. Other technicians will call if they have issues, and you'll play a key part in arranging future interviews for potential new members of staff. Each day you'll also be working with an assortment of equipment from Automatic Doors to Industrial roller shutters, You will be expected to manage your own work in progress, ensure all relevant paperwork is completed accurately, whilst communicating with your line manager of any issues the area is experiencing. You'll attend regular training courses and management meetings whilst being an active team player sustaining the company's fantastic reputation and future growth. Essential requirements of a successful Senior Door Engineer EN16005, IPAF, PASMA Previous practical experience working on swing, sliding entrance systems and industrial door systems Confident in your product knowledge and able to offer advice to other quickly when required Electrical, welding or hydraulics experience Strong leadership skills Working to deadlines and time management Problem solving Salary and Benefits for a Senior Door Engineer: Attractive starting salary package of 55,500 basic OTE circa 65k+ in your first year Overtime rates paid at 1.5 minimum Paid from when you leave home to when you return home and attending office On-call support for the team and attend if necessary Company vehicle and fuel card 25 days annual leave and 8 bank holidays (33 total) Company pension scheme Company performance related bonus worth thousands. PPE and Uniform supplied Ongoing manufacturer and people management training If you're interested in this Senior Door Engineer opportunity and looking to join a leader in their field, This could be the perfect opportunity for you. Apply now!
JOB LOCATION: Doncaster, UK. Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. Key job responsibilities Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. A day in the life About the team BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Bachelor's degree in Electrical, Mechanical, Industrial or Civil Engineering - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience managing teams - Experience in strategic planning PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Jun 12, 2026
Full time
JOB LOCATION: Doncaster, UK. Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. Key job responsibilities Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. A day in the life About the team BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Bachelor's degree in Electrical, Mechanical, Industrial or Civil Engineering - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience managing teams - Experience in strategic planning PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. This role includes a travelling activity of 15%. Key job responsibilities Lead the team, own the annual reporting responsibilities, and mentor your direct reports to develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Collaborate with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to enhance safety and equipment availability for our internal customers, with a key focus on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. A day in the life We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centers. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Jun 12, 2026
Full time
Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. This role includes a travelling activity of 15%. Key job responsibilities Lead the team, own the annual reporting responsibilities, and mentor your direct reports to develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Collaborate with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to enhance safety and equipment availability for our internal customers, with a key focus on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. A day in the life We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centers. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
DESCRIPTION: Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. RESPONSIBILITIES: Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. Key job responsibilities Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Bachelor's degree in Electrical, Mechanical, Industrial or Civil Engineering - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience managing teams - Experience in strategic planning PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Jun 12, 2026
Full time
DESCRIPTION: Amazon Operations sits at the heart of the Amazon customer experience. We look after everything from the moment a customer clicks buy, to the moment their item is delivered - from desktop to doorstep. Across Europe we have more than 50 Fulfillment Centers, hundreds of Delivery Stations, thousands of machines, and tens of thousands of employees, all working together in harmony to make sure the right item gets delivered to the right person, in the right place, at the right time. Working in Amazon Operations is for people who like to be active and give their all. We work in a busy, dynamic environment and are part of a bigger team delivering on the expectations of millions of customers every single day. We are open, inclusive and welcome individuality and diversity. The culture in our Operation is built on the way teams bond and the work ethic that enables our business run like clockwork. Our teams take pride in a job well done, looking out for one another, ensuring the highest safety standards and playing their part in delivering the quality service Amazon is known for around the world. Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. PURPOSE OF THE JOB: We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineering Manager. The Reliability Maintenance Engineering Manager is the site lead for all Engineering matters within a building. They are responsible for leading their team and building a culture of safety; for ensuring all statutory compliance requirements are followed to provide a safe working environment for all occupants of the building; for providing a high level of equipment availability to the General Manager and for working with the EU Engineering team to plan for future growth. They are also required to take part in network wide improvement initiatives and to implement standards created elsewhere in the network. This role includes a travelling activity of 15%. RESPONSIBILITIES: Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. Key job responsibilities Lead the team, own the annual reporting responsibilities for the team and mentor their direct reports who in turn develop the technicians within the team. Work with the site Safety department & Site Leadership to implement, record and audit safety and statutory compliance programs to provide a safe working environment for all staff. Own the legal responsibilities as the site engineering lead within this framework. Work with the recruitment team to ensure allocated headcount is filled with high quality experienced staff. This may include support to Apprentice and Graduate programs. Implement standards validated by the EU Engineering team and participate in continuous improvement initiatives to create or update standards as required in order to provide high levels of safety and equipment availability to our internal customers. A key focus is on preventative maintenance programs. Maintain equipment failure contingency plans, coordinate rehearsals with affected parties and be prepared to work in a flexible manner to ensure failures or breakdowns are rectified as quickly as possible. Maintain a long-term focus by working with Site Management, Finance, the EU Engineering team and internal design teams to plan for future growth, upgrades or new equipment roll outs. BASIC QUALIFICATIONS - Bachelor's degree, or experience at Amazon - Bachelor's degree in Electrical, Mechanical, Industrial or Civil Engineering - Experience in employee and performance management - Experience in distribution or manufacturing field with equivalent mechanical or electrical field - Experience in facilities management, office management, corporate administrative services, or hospitality management - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience managing teams - Experience in strategic planning PREFERRED QUALIFICATIONS - Experience in design review process to incorporate electrical, mechanical, automation controls solutions to drive equipment reliability and standards - Experience in automated conveyors systems and controls, electrical and electronic principles, blueprint and electrical schematic reading, CMMS programs, preventive maintenance procedures, industrial electrical, industrial controls , industrial electronics Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
At Saint-Gobain Abrasives, we are looking for a Plating Technician to join our manufacturing team in Staverton, helping to deliver high-quality rotary dresser products used by customers across a range of demanding industries including aerospace, automotive, bearing and powertrain sectors. This role forms part of our specialist manufacturing team responsible for critical plating processes that directly impact product quality and performance. You'll play a key role in preparing products for plating, monitoring plating schedules, maintaining process controls and ensuring components meet exact customer specifications. This is a fantastic opportunity for someone who enjoys a hands-on technical role, takes pride in maintaining high standards and wants to develop their skills within a supportive engineering environment. Saint-Gobain Abrasives is part of Saint-Gobain UK & Ireland, a worldwide leader in light and sustainable construction. Our Abrasives business develops and manufactures innovative grinding, cutting, finishing and precision-engineered solutions that support customers across a wide range of industrial sectors. With a strong focus on innovation, quality and continuous improvement, we play a key role in delivering products that help our customers achieve outstanding performance. This is a permanent role working Monday to Thursday 7:30am - 4:00pm - Friday 7:30am - 12:30pm and following successful completion of probation, you'll also benefit from our flexible working hours policy, allowing you to work your 8 hours shift between the hours of 6am and 6pm. What we're looking for: Experience working within a manufacturing, engineering or process-driven environment where quality and attention to detail are essential. Ability to follow technical instructions and interpret engineering drawings accurately. Strong attention to detail with a conscientious approach to maintaining process controls and product quality. A practical mindset with the ability to carry out basic mechanical and electrical maintenance activities on fixtures and equipment. A positive attitude and willingness to learn, develop new skills and contribute to a collaborative team environment. What you will be doing: Preparing moulds and components for plating through activities such as lacquering, taping and shielding to ensure products meet customer specifications. Monitoring plating solutions, plating schedules and quality control checks to maintain consistent process performance and product quality. Maintaining plating equipment, fixtures and fittings, including supporting basic mechanical and electrical repairs where required. Monitoring and maintaining deionised water and effluent treatment systems, ensuring compliance with operational and environmental standards. Recording production activity through SAP, carrying out product inspections and working closely with colleagues to achieve production and delivery targets. Is Saint-Gobain an inclusive employer? Saint-Gobain is a worldwide leader in light and sustainable construction, following our purpose of 'Making the World a Better Home'. We play a part in improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role. Whilst we can't promise to meet every request when we're recruiting, we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you!
Jun 12, 2026
Full time
At Saint-Gobain Abrasives, we are looking for a Plating Technician to join our manufacturing team in Staverton, helping to deliver high-quality rotary dresser products used by customers across a range of demanding industries including aerospace, automotive, bearing and powertrain sectors. This role forms part of our specialist manufacturing team responsible for critical plating processes that directly impact product quality and performance. You'll play a key role in preparing products for plating, monitoring plating schedules, maintaining process controls and ensuring components meet exact customer specifications. This is a fantastic opportunity for someone who enjoys a hands-on technical role, takes pride in maintaining high standards and wants to develop their skills within a supportive engineering environment. Saint-Gobain Abrasives is part of Saint-Gobain UK & Ireland, a worldwide leader in light and sustainable construction. Our Abrasives business develops and manufactures innovative grinding, cutting, finishing and precision-engineered solutions that support customers across a wide range of industrial sectors. With a strong focus on innovation, quality and continuous improvement, we play a key role in delivering products that help our customers achieve outstanding performance. This is a permanent role working Monday to Thursday 7:30am - 4:00pm - Friday 7:30am - 12:30pm and following successful completion of probation, you'll also benefit from our flexible working hours policy, allowing you to work your 8 hours shift between the hours of 6am and 6pm. What we're looking for: Experience working within a manufacturing, engineering or process-driven environment where quality and attention to detail are essential. Ability to follow technical instructions and interpret engineering drawings accurately. Strong attention to detail with a conscientious approach to maintaining process controls and product quality. A practical mindset with the ability to carry out basic mechanical and electrical maintenance activities on fixtures and equipment. A positive attitude and willingness to learn, develop new skills and contribute to a collaborative team environment. What you will be doing: Preparing moulds and components for plating through activities such as lacquering, taping and shielding to ensure products meet customer specifications. Monitoring plating solutions, plating schedules and quality control checks to maintain consistent process performance and product quality. Maintaining plating equipment, fixtures and fittings, including supporting basic mechanical and electrical repairs where required. Monitoring and maintaining deionised water and effluent treatment systems, ensuring compliance with operational and environmental standards. Recording production activity through SAP, carrying out product inspections and working closely with colleagues to achieve production and delivery targets. Is Saint-Gobain an inclusive employer? Saint-Gobain is a worldwide leader in light and sustainable construction, following our purpose of 'Making the World a Better Home'. We play a part in improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role. Whilst we can't promise to meet every request when we're recruiting, we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you!
Talent STEM are partnering with an innovative scientific organisation operating within the analytical testing and laboratory services sector to recruit a Laboratory Technician Analytical Chemistry for their laboratory team on an initial 6 month contract. This is an excellent opportunity for a recent graduate looking to begin their career within a laboratory environment. The organisation provides specialist analytical services to a diverse range of industries and offers structured training, professional development and long-term career progression opportunities. The role would suit somebody who has recently completed a degree in Chemistry, Forensic Science or a related scientific discipline and is looking to gain valuable hands-on laboratory experience within a commercial setting. Key responsibilities - Preparing samples for chemical analysis - Supporting laboratory testing activities in accordance with established procedures - Operating and maintaining laboratory instrumentation and equipment - Recording, reviewing and reporting analytical data accurately - Assisting with method development and laboratory investigations where required - Ensuring compliance with laboratory quality standards and procedures - Supporting routine laboratory housekeeping and stock control activities - Following health and safety procedures and maintaining a safe working environment - Working closely with senior scientists and laboratory personnel to support project delivery Candidate profile We are interested in speaking with candidates who have: - A degree in Chemistry, Forensic Science or a related scientific discipline - Full right to work in the UK without current or future sponsorship requirements - A genuine interest in analytical chemistry and laboratory-based work - Strong attention to detail and organisational skills - Good written and verbal communication skills - The ability to work effectively both independently and as part of a team - A proactive approach and willingness to learn new techniques and processes - Previous laboratory experience gained through university projects, placements or industrial experience would be advantageous but is not essential Graduates from Chemistry, Forensic Science, Pharmaceutical Science, Analytical Science, Biochemistry and related disciplines are encouraged to apply. This is an excellent opportunity to join a growing scientific organisation offering comprehensive training, exposure to advanced laboratory techniques and genuine opportunities for long-term career development. Please note that applicants must have the unrestricted right to work in the UK. Sponsorship is not available for this position. For further information or a confidential discussion, please contact Talent STEM. Talent STEM is a specialist recruitment consultancy supporting the scientific, engineering, clinical, chemical, pharmaceutical, FMCG, environmental, waste, biotechnology and medical device sectors.
Jun 11, 2026
Seasonal
Talent STEM are partnering with an innovative scientific organisation operating within the analytical testing and laboratory services sector to recruit a Laboratory Technician Analytical Chemistry for their laboratory team on an initial 6 month contract. This is an excellent opportunity for a recent graduate looking to begin their career within a laboratory environment. The organisation provides specialist analytical services to a diverse range of industries and offers structured training, professional development and long-term career progression opportunities. The role would suit somebody who has recently completed a degree in Chemistry, Forensic Science or a related scientific discipline and is looking to gain valuable hands-on laboratory experience within a commercial setting. Key responsibilities - Preparing samples for chemical analysis - Supporting laboratory testing activities in accordance with established procedures - Operating and maintaining laboratory instrumentation and equipment - Recording, reviewing and reporting analytical data accurately - Assisting with method development and laboratory investigations where required - Ensuring compliance with laboratory quality standards and procedures - Supporting routine laboratory housekeeping and stock control activities - Following health and safety procedures and maintaining a safe working environment - Working closely with senior scientists and laboratory personnel to support project delivery Candidate profile We are interested in speaking with candidates who have: - A degree in Chemistry, Forensic Science or a related scientific discipline - Full right to work in the UK without current or future sponsorship requirements - A genuine interest in analytical chemistry and laboratory-based work - Strong attention to detail and organisational skills - Good written and verbal communication skills - The ability to work effectively both independently and as part of a team - A proactive approach and willingness to learn new techniques and processes - Previous laboratory experience gained through university projects, placements or industrial experience would be advantageous but is not essential Graduates from Chemistry, Forensic Science, Pharmaceutical Science, Analytical Science, Biochemistry and related disciplines are encouraged to apply. This is an excellent opportunity to join a growing scientific organisation offering comprehensive training, exposure to advanced laboratory techniques and genuine opportunities for long-term career development. Please note that applicants must have the unrestricted right to work in the UK. Sponsorship is not available for this position. For further information or a confidential discussion, please contact Talent STEM. Talent STEM is a specialist recruitment consultancy supporting the scientific, engineering, clinical, chemical, pharmaceutical, FMCG, environmental, waste, biotechnology and medical device sectors.
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Jun 11, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £42,000 per annum + Benefits LOCATION: Field based across South England and candidates can be based in Surrey, Hampshire, Berkshire or surrounding Counties. JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£42,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14701 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in South / South East England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Jun 11, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £42,000 per annum + Benefits LOCATION: Field based across South England and candidates can be based in Surrey, Hampshire, Berkshire or surrounding Counties. JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£42,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14701 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in South / South East England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
We are working with a well-established UK-based manufacturer of industrial DC power systems, supporting critical infrastructure across sectors including utilities, transport, and energy worldwide. They are seeking a detail-oriented PCB Assembly Technician to join their Somerset site to support the assembly, inspection, and stock control of printed circuit boards. You'll work closely with production and stores teams to ensure high-quality output and efficient operations. Key Responsibilities for this PCB Assembly Technician Based in Somerset: Assemble and solder PCBs to specification (through-hole and surface mount) Inspect assemblies to ensure right-first-time quality Identify faults and carry out basic repairs Monitor and maintain stock levels Complete production and stock records accurately Follow ESD, quality, and health & safety procedures Support continuous improvement initiative Skills & Experience for this PCB Assembly Technician Based in Somerset: Experience in PCB assembly and soldering Ability to read technical drawings and schematics Strong attention to detail and manual dexterity Basic knowledge of electronic components IPC certification (desirable) About You Reliable, self-motivated, and team-oriented Keen to learn and develop Able to work efficiently to deadlines with high accuracy What We Offer Stable role within a growing, specialist manufacturer Supportive team environment Opportunity to contribute to critical engineering solutions Interested? Apply now with your CV and relevant experience to (url removed) or call on (phone number removed)
Jun 11, 2026
Full time
We are working with a well-established UK-based manufacturer of industrial DC power systems, supporting critical infrastructure across sectors including utilities, transport, and energy worldwide. They are seeking a detail-oriented PCB Assembly Technician to join their Somerset site to support the assembly, inspection, and stock control of printed circuit boards. You'll work closely with production and stores teams to ensure high-quality output and efficient operations. Key Responsibilities for this PCB Assembly Technician Based in Somerset: Assemble and solder PCBs to specification (through-hole and surface mount) Inspect assemblies to ensure right-first-time quality Identify faults and carry out basic repairs Monitor and maintain stock levels Complete production and stock records accurately Follow ESD, quality, and health & safety procedures Support continuous improvement initiative Skills & Experience for this PCB Assembly Technician Based in Somerset: Experience in PCB assembly and soldering Ability to read technical drawings and schematics Strong attention to detail and manual dexterity Basic knowledge of electronic components IPC certification (desirable) About You Reliable, self-motivated, and team-oriented Keen to learn and develop Able to work efficiently to deadlines with high accuracy What We Offer Stable role within a growing, specialist manufacturer Supportive team environment Opportunity to contribute to critical engineering solutions Interested? Apply now with your CV and relevant experience to (url removed) or call on (phone number removed)
