429 jobs found

STRESS ENGINEER Permanent Position Office Based Telford We have an exciting opportunity for an experienced Stress Engineer to join our client who specialise in the design, manufacture and installation of Product Handling Equipment within a variety of engineering industries. An experienced Stress Engineer is required to support the mechanical engineering department with machine and structures design verification. The client Our client is an engineering company specialising in the design, manufacture and installation of product handling systems. Full turnkey solutions - Offering Electrical and Controls engineering undertaken from another site, Mechanical and Hydraulic engineering is taken care of at the Telford office. The full turnkey solution is then built and tested in Telford before being shipped and installed at site. Our client supports its customer worldwide in many industry sectors, both onshore and offshore. Industries supported by our client include Oil and Gas, Renewables, Oceanographic Survey and Defence. About the Role An experienced Stress Engineer is required to support the mechanical engineering department with machine and structures design verification. The stress engineer will support the principal engineer to ensure all designs are suitably assessed and verified. Each design shall be reviewed to determine the most appropriate verification method before undertaking the verification assessment themselves or overseeing another design engineer undertake the assessment. Design verification reports are to be authored and calculation packages compiled for the technical file and/or for third party design verification. Responsibilities Identify loads acting equipment and structures Define load paths acting through equipment and structures Define foundation loads Strength and deflection assessment for equipment and structural verification Design code compliance Proficient in FEA and manual calculation techniques Development of calculation templates for departmental use Training and supporting design engineers in design verification methods Skills and Qualifications Minimum HNC in mechanical engineering and completion of technical apprenticeship scheme. or Degree in mechanical engineering or equivalent Microsoft Office applications Autodesk AutoCAD Autodesk Inventor Nastran InCAD Experience 10 years in a similar role Offshore design with knowledge of DNV, LR, ABS, BV design codes Relevant industry sectors including lifting, cranes, industrial and structural engineering Euro Codes Machinery Directive and/or Supply of Machinery (Safety) Regulations Applications: This vacancy is available to Candidates with relevant experience as detailed in the job description. Due to the volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Candidates must be authorised to work in the country where this role is located BEFORE making an application.

At CV-Library, we have a simple vision: to help the world to work and we are looking for exceptional and talented people to help us realise this vision in both UK and overseas markets. We are in a period of focused internal investment, following a year of key strategic acquisitions and significant investment across all parts of the business, from Tech and Data to People and HR, there's never been a more exciting time to join us or a better place to grow your career! The Role Hours: Monday-Friday, 9:00-17:30 Location: Fleet Working Pattern: Hybrid - twice a quarter We are looking for a Principal Software Engineer to provide technical leadership across multiple domains, including mobile applications and backend/server systems. This role is centred on driving alignment across teams and systems - owning how services and applications interact, ensuring consistency in interface design, and coordinating implementation approaches across Product, Architecture and Engineering. You will play a key role in shaping how our platform evolves, helping teams deliver independently while maintaining a cohesive and scalable system. This is a highly collaborative role requiring strong communication, influence and the ability to build consensus across a diverse engineering organisation. Responsibilities: Own and evolve the interface specification lifecycle, including definition, documentation and governance Act as a bridge between mobile, backend and platform teams, ensuring alignment in how systems interact Coordinate implementation strategies across teams, working closely with Architecture, Product and Engineering Maintain a strategic technical view across domains, identifying opportunities for simplification, reuse and consistency Drive clarity in system boundaries, contracts and integration patterns Facilitate cross-team technical discussions, building alignment and resolving ambiguity Support teams in translating architectural direction into practical, deliverable approaches Identify and manage cross-cutting technical risks and dependencies Champion best practices in API and interface design, focusing on usability, scalability and maintainability Contribute to target architecture planning, including platform convergence and legacy system evolution Mentor engineers and technical leaders, particularly in systems thinking and cross-domain design Ensure high-quality, accessible technical documentation Contribute hands-on to implementation when needed, particularly to unblock teams, accelerate critical delivery, or de-risk complex changes Lead by example through pragmatic technical contribution, balancing strategic oversight with selective execution What we're looking for Strong experience as a senior or lead engineer, with demonstrated impact beyond a single team Proven ability to work across team boundaries, influencing technical direction and driving alignment Experience designing and working with well-defined interfaces and APIs Strong understanding of software architecture concepts and system design principles Excellent communication and consensus-building skills, with the ability to bring diverse stakeholders together Ability to navigate ambiguity and provide clarity in complex technical landscapes A systems-thinking mindset, with an interest in how different parts of a platform interact and evolve Experience supporting delivery through collaboration rather than direct ownership Commitment to high standards in documentation, clarity and engineering quality Strong hands-on engineering capability, with the ability to contribute effectively to production code when required Ability to context-switch between strategic thinking and practical implementation, depending on organisational needs We are actively committed to promoting a fully diverse and inclusive workforce and we welcome applications for this role from all candidates who meet the key requirements. Please do not hesitate to get in touch should you require any reasonable adjustments to assist with your application.

Principal Full Stack Engineer & Architecture Lead London (Hybrid) 80,000 - 90,000 + Benefits Command Recruitment is proud to be partnering with an ambitious and rapidly growing healthcare company that is transforming access to specialist healthcare services across the UK. This is a fantastic opportunity for an experienced Principal Engineer or Technical Architecture Lead to play a key role in shaping a modern, cloud-native healthcare platform that is making a genuine impact on people's lives. Our client is building one of the UK's most innovative healthcare service platforms and is seeking a hands-on technical leader who can combine strategic architecture with strong full-stack engineering expertise. The Opportunity As Principal Full Stack Engineer & Architecture Lead, you will take ownership of platform architecture, engineering standards, cloud infrastructure, and technical delivery across the business. You'll work closely with senior leadership, including the CTO, Director of Engineering, Product teams, and Data teams, to drive scalability, resilience, performance, and engineering excellence while remaining hands-on with development. This role would suit someone who enjoys solving complex technical challenges, mentoring engineers, and building modern distributed systems within a fast-moving product-led environment. Key Responsibilities Architecture & Technical Leadership Lead platform architecture and technical design decisions Define scalable, secure, and maintainable engineering standards Provide technical leadership across frontend, backend, APIs, infrastructure, and integrations Drive platform scalability, resilience, observability, and performance Partner with leadership teams to align technical strategy with business goals Act as the senior technical authority for complex engineering decisions Hands-On Engineering Contribute directly to backend and frontend production code Build scalable applications using Node.js, TypeScript, React, and Next.js Design and develop AWS serverless and event-driven systems Develop and optimise PostgreSQL databases and queries Support engineering teams with the delivery of complex technical initiatives Cloud, DevOps & Infrastructure Design and maintain CI/CD pipelines and deployment automation Build Infrastructure as Code using Terraform or AWS CDK Improve engineering workflows, release processes, and platform reliability Implement best practices across monitoring, logging, security, testing, and resilience Ensure systems remain secure, scalable, and compliant with GDPR and healthcare regulations Engineering Leadership Mentor and support engineers across the organisation Conduct code reviews and promote engineering best practices Help establish coding standards, testing frameworks, and operational excellence Foster a collaborative, high-performing engineering culture Technology Stack Cloud & Infrastructure AWS (Lambda, API Gateway, EventBridge, SQS, Step Functions, S3, CloudWatch, RDS) Backend Node.js, TypeScript Frontend React, Next.js, Tailwind CSS Data & Architecture PostgreSQL, Serverless, Event-Driven Microservices DevOps & Observability Terraform / AWS CDK, CI/CD, Monitoring & Logging About You We are looking for a technically strong and commercially minded engineering leader with: 10+ years of software engineering experience Proven experience operating at Principal Engineer, Staff Engineer, or Architecture Lead level Strong AWS cloud and serverless architecture expertise Excellent full-stack development experience across Node.js, TypeScript, React/Next.js, and PostgreSQL Experience leading technical direction across engineering teams Strong understanding of distributed systems and event-driven architecture Experience designing scalable, secure, production-grade systems A hands-on mindset with a passion for building high-quality technology Desirable Experience Life Science or regulated industry experience GDPR and data security knowledge AI/ML integrations or personalisation systems SaaS or startup experience What's On Offer 80,000 - 90,000 salary Hybrid working (office 2-3 days per week) 30 days holiday including bank holidays Pension contribution Birthday day off Modern equipment provided Team events and collaborative culture Opportunity to shape a fast-scaling healthcare platform with genuine social impact

Overview With the continued expansion of our award winning technical services company, Sudlows, who work throughout the UK, have a growing portfolio of projects and have a fantastic opportunity for a Audio/Visual Solutions Engineer to join our successful business. We have over 220 staff and have achieved recent growth with ongoing expansion plans. Sudlows are keen to recruit candidates who will be part of this ambition. We are an equal opportunities employer and value diversity in our workforce. Role Purpose The role of the Audio / Visual Solutions Engineer (AVSE) sits with Sudlows Smart Technology team and supports a range of activities around the design and delivery of our Audio/Visual Solutions for our customers The employee will principally be involved in the installation, configuration, commissioning and technical support of Audio/Visual systems however will also contribute to design activities such as surveying and support design documentation and well as providing site level project supervision where workload allows. The AVSE should also maintain a good knowledge of the prevalent standards and be willing to continually develop and learn in order to match and stay current with the changing pace of technology. As part of this role the employee must also maintain a working knowledge of structured cabling systems as this is a large part of the businesses offering but also it can be the foundation on which an IP based AV system will sit. Sudlows prides itself on quality of our designs and installations as well as how we engage with the customer, as a customer facing operative the Audio/Visual Solutions Engineer will be expected to provide a high level of customer service in keeping with Sudlows standards as well as proving clear and concise communication both internally and externally. The highest levels of workmanship are expected as standard as well as strict adherence to our health and safety standards. All employees are expected to be able to follow company processes relating to work generated documentation and our internal paperwork and systems. Key Responsibilities Installation and Commissioning Install AV systems including displays, projectors, audio systems, control systems, VC solutions, and structured cabling Terminate and test cabling (Cat6/6A, fibre, speaker cable, control cabling). Rack build, equipment mounting, and system interconnections. Configure AV equipment (e.g. DSPs, control processors, video conferencing systems). Perform system testing, fault finding, and troubleshooting. Commission systems to meet performance and design specifications. Produce commissioning documentation and test results. Complete witness testing and end user training. Project Supervision (Entry-Level) Supervise small AV installations or work packages on-site. Coordinate with subcontractors and internal engineers. Ensure works are delivered in line with programme and scope. Maintain site documentation (RAMS, checklists, progress updates). Liaise with clients and stakeholders during installation. Report progress, risks, and issues to project managers. Design Support Assist with AV system design including: Equipment selection, Signal flow diagrams and Rack layouts and schematics. Support senior engineers or designers in producing technical submissions. Review drawings and identify practical installation considerations. Conduct site surveys for a range of AV solutions. Provide feedback from site to improve future designs. Assist with bill of materials (BOM) preparation. Personal Specification Minimum Requirements Demonstrable knowledge of the design Audio / Visual systems across a range of technologies including but not limited to projectors, TVs, touchscreens, sound systems and amplifiers, communal presentation and meeting systems and software and meeting room integration to control the meeting room environment. Demonstrable knowledge of current and prevalent standards and licencing requirements that govern works within the Audio / Visual space. A working knowledge of structured cabling systems and active networking as the foundations of a system that supports an IP based AV installation. Experience working with industry leading manufacturers systems such as Crestron, Kramer, QSC, Biamp, Samsung and Logitech for example. Excellent attention to detail and accuracy while completing documentation in all its forms. Excellent customer facing manner. Strong fault-finding and problem-solving skills. Flexible approach to working location and times. UK Driving Licence. Desirable Requirements Manufacturer awarded training and certification in the installation and / or design of Audio / Visual systems such as Crestron, Kramer, QSC, Biamp, Samsung and Logitech for example. AVIXA CTS (or working towards). Experience in producing design drawings, schematics and proposals for AV installations. Experience in using a range of design tools such as MS Visio and CAD to support your design proposals. Proven experience and / or industry recognised training with other technologies in the intelligent building space such as, IP Security, Intelligent Lighting, HVAC and Energy Management. CSCS / ECS Card

An exciting opportunity has arisen for an experienced Subject Matter Expert/Design Manager (Airfield Systems) to join a major UK airport, supporting the delivery of a multi-billion-pound capital investment programme focused on enhancing critical airport infrastructure and operational efficiency. This role sits within a dynamic construction and project delivery environment and will play a pivotal role in leading the design of large-scale, strategically important airfield systems projects (typically 100m- 150m+). The Role As the Subject Matter Expert/Design Manager, you will lead design management activities from project inception through to construction, commissioning and handover, ensuring solutions are safe, compliant, cost-effective, and aligned with operational requirements. You'll manage a small team of Design Management professionals and act as a key interface between internal stakeholders, engineering teams, and external design consultants and contractors. Key Responsibilities Lead design management across the full project lifecycle, including associated smaller projects where required Develop project scope, support business cases, and produce detailed design briefs Manage and coordinate external design consultants and Design & Build contractors Drive safe, efficient, and value-led design solutions aligned to engineering standards Ensure all design outputs meet quality, technical, regulatory, and programme requirements Monitor and coordinate design changes throughout construction and handover stages Define asset information requirements in collaboration with internal stakeholders Support statutory duties in line with CDM regulations (Principal Designer responsibilities where applicable) Contribute to contractor and consultant selection processes, including technical evaluations Support continuous improvement of design management and project delivery processes Work closely with stakeholders, balancing operational impact with project delivery needs Collaborate with construction teams to ensure design alignment, safety, and quality on-site Lead the review of as-built information to ensure successful project close-out and handover Ensure compliance with all legal, statutory, planning, and regulatory obligations Lead, coach, mentor, and develop a small team About You Degree-qualified (or equivalent) in Electrical Engineering or a relevant construction/engineering discipline Chartered Engineer (or working towards / highly desirable) Significant experience (typically 10+ years) in engineering design or design management on large, complex infrastructure projects ( 100m+) Strong expertise in airfield systems, particularly Airfield Ground Lighting (AGL), navigation and landing systems (ILS/RNP/GNSS etc), surface movement radar as well as civils works related to drainage and monitoring systems etc Proven experience leading design management teams (typically 3+ years managing small teams) In-depth knowledge of electrical design, installation, commissioning, and regulatory requirements within an airfield environment Strong understanding of project lifecycle, including commissioning and handover processes Solid knowledge of health, safety, environmental, and quality management within construction Experience coordinating multidisciplinary engineering teams Familiarity with NEC contracts (desirable), including PM instructions and contractor claims Strong problem-solving skills, resilience, and ability to manage ambiguity Proficient in MS Office and project tools (e.g., MS Project) CSCS card required Environment & Stakeholder Landscape Part of a Construction function delivering a 1bn capital investment programme over 5 years Projects typically up to 50m within this role's direct remit Extensive stakeholder engagement, including senior airport leadership, airlines, and key suppliers Close collaboration with Engineering, EHS, Procurement, and Construction teams Contract Details Contract role (Inside IR35) Hybrid working: 3 days on-site / 2 days remote Long-term opportunity within a major infrastructure programme

Job Purpose To provide strategic and operational technical leadership on fire safety, fire engineering, and associated building safety risks across the Councils housing portfolio. The postholder supports the Council, as Accountable Person and Principal Accountable Person for its Higher-Risk Buildings (HRBs), by providing specialist technical advice, assurance, and oversight in relation to fire safety compliance, design standards, refurbishment activities, fire protection systems, contractor performance, and incident investigation. The role provides independent technical assurance in relation to fire and building safety risks, supports the development of safe systems of work, contributes to incident management, and ensures technical compliance with relevant fire safety, building safety, and health and safety legislation. The role does not ordinarily hold primary operational responsibility for building-level risk management, which remains with the Building Safety Management function. Whilst the role primarily provides technical leadership, assurance, and professional oversight, the postholder may undertake limited technical involvement in strategically significant Higher-Risk Buildings (HRBs) where required to maintain operational competence, support organisational resilience, or provide specialist technical leadership. Key Accountabilities The postholder is accountable for: Providing strategic technical leadership and independent professional challenge across fire safety, design compliance, contractor assurance, and building safety risk management. Providing assurance to the Head of Fire & Building Safety on emerging technical risks, systemic compliance issues, and organisational fire safety performance. Providing professional fire safety leadership, technical assurance, and expert advice across the housing portfolio. Ensuring fire safety design, construction, refurbishment, and maintenance activities comply with statutory requirements, recognised guidance, and relevant technical standards. Providing independent technical assurance, through risk-based sampling, that Fire Risk Assessment (FRA) actions, fire safety works, and other life safety control measures across the Councils non-HRB housing portfolio are completed, verified, and compliant, with systemic non-compliance formally escalated where required. Leading fire incident investigations, technical reviews, and lessons learned activities. Ensuring fire-related incidents, Mandatory Occurrence Reporting events, and relevant statutory notifications are identified, escalated, and managed appropriately. The effective leadership, performance, and development of direct reports. Escalating significant fire safety, contractor, compliance, or systemic risks to senior management. Key Responsibilities Technical Fire Safety Assurance Review drawings, specifications, fire strategies, design submissions, and technical proposals to ensure compliance with relevant legislation, approved guidance, and standards including Approved Document B, BS 9991, BS 5839, and BS 5266. Identify design defects, fire safety non-compliance, compartmentation failures, and technical risks associated with refurbishment, repairs, or existing buildings, providing formal technical recommendations. Review findings from intrusive investigations, compartmentation surveys, fire stopping inspections, structural fire safety reviews, and Fire Risk Appraisals of External Walls (FRAEWs). Provide technical advice to project teams, Housing, Asset Management, Repairs, Capital Works, Direct Labour Organisation (DLO), Voids, and contractors on corrective actions and risk mitigation. Fire Risk Assessment (FRA) Assurance Provide independent technical assurance of completed Fire Risk Assessment actions across the Councils non-HRB housing portfolio using a risk-based sampling and verification approach. Undertake targeted audits and physical verification inspections of completed FRA actions to assess quality, compliance, workmanship, and effectiveness. Identify systemic issues, recurring defects, contractor underperformance, or weaknesses in action close-out processes, ensuring findings are formally reported and escalated. Work collaboratively with the FRA Manager and associated compliance teams to improve completion assurance, contractor performance, data quality, and organisational learning. Provide technical advice and recommendations where sampled FRA actions are found to be incomplete, non-compliant, or ineffective. Site Inspections & Contractor Assurance Undertake targeted, risk-based site inspections during live works to provide independent technical assurance. Review and provide technical input on RAMS, permit-to-work arrangements, temporary fire precautions, and high-risk activities including hot works, compartmentation breaches, isolations, and fire stopping works. Provide technical assurance of contractor performance and escalate non-compliance, unsafe practices, or defective works where identified. Fire Protection Systems Provide technical assurance on the performance, design, maintenance, and remediation of fire protection systems including fire alarms, emergency lighting, sprinklers, AOVs, smoke control systems, and fire doors. Escalate technical failures and support resolution through project teams, contractors, and the Fire Door Project Manager where required. Building Safety Support Provide specialist technical advice to the Fire & Building Safety Team on Building Safety Cases (BSCs), fire engineering matters, design compliance, and regulatory evidence requirements. Support BSR submissions, gateway requirements, audits, inspections, and regulatory responses where required. Incident Investigation & Regulatory Reporting Lead technical reviews of fire incidents, near misses, and significant safety events across the housing portfolio. Maintain oversight of fire incident recording, analysis, root cause investigation, lessons learned, and corrective actions. Act as technical liaison with the London Fire Brigade and other enforcement or regulatory bodies where required. Ensuring serious fire-related incidents are technically investigated, escalated, and managed appropriately, and providing specialist support where potential Mandatory Occurrence Reporting (MOR) events are identified within HRBs. Resident Safety & Complex Casework Provide technical input to resident engagement, safety communications, complaints, and complex resident vulnerability cases where specialist fire safety advice is required. Support proportionate fire risk assessments for vulnerable residents, including Person-Centred Fire Risk Assessments where required. Provide technical support on complex fire safety issues across non-HRB residential stock including sheltered housing, hostels, street properties, and other specialist accommodation. Leadership & People Management Lead, manage, and develop direct reports in line with organisational policies and expectations. Set objectives, monitor performance, and ensure delivery of fire safety programmes and technical inspections. Undertake regular one-to-one meetings, annual performance reviews, workforce planning, and development activities. Manage attendance, wellbeing, succession planning, and service resilience arrangements. Scope of Role The Fire Safety Technical Lead provides independent technical assurance, professional advice, and specialist oversight in relation to fire safety, fire engineering, contractor assurance, incident investigation, and associated building safety risks. The role does not ordinarily hold primary operational responsibility for building safety risk management, compliance programme delivery, or corporate health and safety advisory functions. Where required, the postholder may provide enhanced technical oversight, specialist intervention, or independent technical assurance in relation to strategically significant Higher-Risk Buildings to maintain professional competence, strengthen service resilience, and support continuous improvement across the Fire & Building Safety function. Key Relationships Internal Head of Fire & Building Safety Senior Building Safety Manager (for operational coordination) Building Safety Managers Fire & Building Safety Team Housing, Asset Management, Capital Works, Repairs, DLO, Voids and Compliance functions Health & Safety, Governance, and Corporate support services External London Fire Brigade Building Safety Regulator Contractors, Consultants, Fire Engineers, and Specialist Advisors Working Arrangements and General Responsibilities The postholder is required to work flexibly in line with service requirements, including hybrid working, office attendance, site inspections, technical meetings, incident response activity, and occasional attendance outside normal working hours where required. Core working arrangements will operate in accordance with Council policies and service requirements.

Role: Mechanical Engineer Location: Rochester, Kent 4+ days on-site per week Salary: 55,000 - 65,000 + benefits Experienced Mechanical Engineer needed in Rochester to work on cutting edge systems within the aerospace industry. The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. You will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. What the role of the Mechanical Engineer entails: Some of the main duties of the Mechanical Engineer will include: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads, Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures What experience you need to be the successful Mechanical Engineer: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team Benefits: Overtime, 14% pension, 25 days holiday, free shares and more! Candidates would need to have lived & worked in the UK for 5+ years and be eligible for SC security clearance. This really is a fantastic opportunity for a Mechanical Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Principal People are excited to be working exclusively with a growing organisation who are looking to appoint a Regional Health and Safety Manager. This is a fantastic opportunity for a Health, Safety and Environmental professional to take ownership of a multi-site role, driving both cultural change and continuous improvement across multiple locations. The successful candidate will join a market leading business that is growing steadily and places health, safety and environmental at the heart of its operations. This is an on-site, operationally focused role with the opportunity to influence senior stakeholders. Regional Health and Safety Manager - Logistics Wakefield, Yorkshire - £60,000 - £65,000 + Benefits Package The key duties include: Leading and driving cultural change across health, safety and environment. Managing HSE compliance across the sites Ensuring risk assessments and safe systems of work are in place and regularly reviewed Developing, implementing and maintaining safety action plans and compliance programmes Managing accident, incident and near-miss reporting, ensuring thorough investigation and follow-up Able to embed a proactive safety culture across the business Being visible and operational throughout the locations and champion behavioural safety Why should you apply for the role? Opportunity to lead HSE with great scope across the business The opportunity to progress to a Head of Health and Safety position in the years to come High levels of autonomy to make positive change, backed by engaged senior leadership A varied role covering multiple sites, each with challenges A chance to make a real difference within the company A wide variation within the company s risk profile We would love to see CVs from people who have NEBOSH General certificate (Diploma is preferred) Experience within a higher risk industry sector such as Manufacturing, Logistics, Waste and Recycling, Engineering etc. Experience within an operational safety environment Someone who s collaborative who can communicate well, is personable with drive and resilience.

Engineering Manager - High-End Commercial Landmark Location: Central London S alary: 67,000 + overtime + on call Contract: Monday - Friday: 8am - 5pm The Opportunity We are seeking an elite Engineering Manager to lead the technical service delivery at a high-spec, prestigious commercial building in Central London. Our client is a premier building services specialist renowned for maintaining some of the capital's most iconic corporate properties. This contract operates within a high-profile, landlord-and-tenant environment where engineering excellence, impeccable plant room standards, and "white-glove" customer service are the everyday standard. This is a strategic management appointment for a technical leader who wants to combine hands-on operational authority with robust commercial governance. The Role As the Engineering Manager, you will hold ultimate accountability for the building's operational uptime, engineering compliance, and financial performance. Managing a dedicated on-site team of supervisors and multi-skilled engineers, you will act as the principal technical advisor to both the landlord and tenant representatives. Key Responsibilities: Technical & Operational Leadership Technical Authority: Serve as the final point of escalation for all technical, mechanical, and electrical queries on-site, with a strong focus on LV/HV distribution, critical cooling, and BMS optimisation. Maintenance Strategy: Govern the delivery of Planned Preventative Maintenance (PPM) and reactive repairs, ensuring 100% operational uptime for the building's critical infrastructure. Commercial & Financial Governance Financial Lifecycle: Manage the "WIP-to-Invoice" cycle, ensuring accurate billing, proactive debt resolution, and streamlined procurement. Account Growth: Identify site improvement projects, prepare detailed commercial quotes, and present business cases to the client to expand the extra works portfolio. People & Performance Management Team Leadership: Provide technical mentorship, support, and line management for a high-performing engineering team, fostering a supportive, "One Team" culture of professional pride. Capability Development: Conduct regular appraisals, skills audits, and identify training pathways to keep your team at the forefront of the building services market. Subcontractor Management: Lead the procurement, coordination, and performance auditing of specialist supply-chain vendors. HSE & Compliance Governance Statutory Compliance: Maintain 100% compliance across all mechanical, electrical, and public health systems. Ensure all technical logbooks are immaculate and audit-ready. Safe Systems of Work (SSoW): Implement and govern robust safe working practices, taking charge of high-risk RAMS reviews and the site's Permit to Work system. What We Are Looking For The ideal candidate will be a well-presented, polished technical professional who thrives in a corporate environment. Technical Requirements: Qualifications: Minimum NVQ Level 3 (or City & Guilds equivalent) in an Electrical discipline Regulations & Safety: 18th Edition IET Wiring Regulations and IOSH Managing Safely or NEBOSH General Certificate. Experience: Proven track record in an Engineering Manager or high-level Technical Supervisor role within high-spec commercial offices, corporate headquarters, or "Landlord & Tenant" environments. System Knowledge: Proficient in the use of advanced CAFM platforms (e.g., Concept, Maximo) and building management systems (BMS). Professional Attributes: Corporate Mindset: Exceptional communication skills with the capability to translate complex engineering challenges into clear, actionable advice for non-technical clients. Decisiveness: Strong leadership presence, capable of making calm, analytical decisions under pressure or in emergency fault scenarios. Why Join the Team? Our client takes genuine pride in supporting their managers and providing the infrastructure for a highly rewarding career: Excellent Benefits: Including a comprehensive pension scheme, private healthcare, and retail discount programs. Workplace Culture: Join an engineering-led business where your professional pride is matched by company-wide standards of excellence. If you are a technical leader ready to drive operational standards at a premium London asset, apply today. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Our environmental services contractor is seeking a Section engineer to join their Stratford based team on a permanent basis with site visits on London based projects. The Section Engineer will join a growing delivery team, supporting sewage and drainage infrastructure works across the UK. This role is to replace a key vacancy and will play a critical part in delivering projects from pre-construction through to final handover. Works include new sewer installations, construction of manholes (MH), drainage diversions, and associated civil engineering works, delivered on behalf of water companies and major principal contractors, including experience aligned with high-profile infrastructure projects such as HS2. Role Responsibilities The successful candidate will take ownership of a section of works and be responsible for: Pre-Construction Preparation and review of documentation including: RAMS (Risk Assessments & Method Statements) Permits to Work ITPs (Inspection & Test Plans) Temporary Works documentation Supporting programme development and buildability reviews Liaising with client representatives, water companies, and principal contractors Construction Phase Setting out for drainage and sewer works Managing Site Engineers and site teams Supervising groundwork, temporary works, and permanent works Construction of new manholes and sewer lines Ensuring compliance with specifications, quality standards, and H&S requirements Coordination with Temporary Works Coordinators and design teams Handover Preparation of as-built drawings Compiling QA documentation and handover packs Supporting client sign-off and completion procedures Skills/experience/qualifications Proven experience as a Section Engineer within sewage, drainage, or utilities infrastructure Strong background in groundwork, temporary works, and permanent works Experience constructing new manholes and sewer systems Competent in setting out Experience managing site engineers and site teams Strong documentation and QA experience (RAMS, ITPs, permits, as-builts) Confident working with water companies and principal contractors CSCS card Strong leadership and communication skills Proactive and solution-focused mindset Ability to manage works from design stage through to completion Strong understanding of UK health & safety regulations Organised, detail-oriented, and quality-driven Desirable: Experience working on major infrastructure projects (e.g. High Speed 2) Confined Space qualification Temporary Works Supervisor (TWS) or related qualification Appointed Person (AP) qualification (beneficial but not essential) Benefits Competitive salary circa 50-60k per annum Office based in Stratford with sites across London Company vehicle or allowance Pension scheme Career progression within a growing civil engineering contractor Opportunity to work on high-profile UK infrastructure projects

We are seeking an experienced and motivated Project Runner to lead and coordinate construction and refurbishment projects through the full range of the RIBA Plan of Work stages (0 7), from initial inception through to completion, handover and post-occupancy review. The role will primarily involve the delivery of small to medium-scale refurbishment, alteration and improvement projects, typically ranging in value from approximately £5K to £500K, although projects outside of this range may occasionally arise. The successful candidate will act as the day-to-day project lead, managing projects on behalf of the client department and ensuring that schemes are developed, procured and delivered in accordance with programme, budget, statutory requirements and quality expectations. Key Responsibilities Lead projects through all RIBA stages from feasibility through to completion and final account. Liaise directly with client departments to establish, develop and refine project briefs, objectives and operational requirements. Work collaboratively with the in-house Quantity Surveying team to establish project budgets, cost plans and procurement strategies. Assist in the appointment and coordination of external consultants and specialist advisors where required through appropriate procurement processes, including:Principal Designer (CDM Regulations)Building Regulations Principal DesignerStructural EngineersMechanical & Electrical ConsultantsSpecialist Surveyors and DesignersUndertake site visits, surveys and investigations to inform design development. Prepare and develop:Feasibility layoutsPlanning and Building Regulations drawings Tender drawings Construction and working drawing packages Assembly and detailing drawingsProduce specifications using NBS or equivalent specification systems. Utilise existing asset management information, survey data and record drawings in the preparation of project documentation. Coordinate and manage the design process to ensure compliance with: Building Regulations Planning requirements CDM Regulations Relevant British Standards and industry guidance Internal client standards and procedures Support tendering activities in conjunction with the Quantity Surveying team, including responding to tender queries and reviewing contractor submissions. Administer and monitor construction works on site, including: Chairing progress meetings Undertaking site inspections Monitoring quality and progress Reviewing contractor information Managing design changes and technical queries Assist with project reporting, risk management and programme monitoring throughout the project lifecycle. Ensure accurate project records and documentation are maintained throughout delivery. Support handover, defects management and post-completion activities. Essential Requirements Experience of delivering construction or refurbishment projects through multiple RIBA Plan of Work stages. Experience preparing technical drawings and construction information using CAD software. Good understanding of construction detailing, building technology and refurbishment works. Experience producing specifications using NBS or similar systems. Understanding of procurement and contract administration processes. Working knowledge of: Building Regulations Planning processes CDM Regulations Health & Safety requirements in construction Ability to coordinate multiple stakeholders and consultants effectively. Strong organisational and communication skills. Ability to manage workload across multiple projects simultaneously. Competent in Microsoft Office applications and project administration. Full UK driving licence and ability to attend sites across the district as required. Support Structure The successful candidate will work closely with an established in-house Quantity Surveying team who will provide support in relation to: Cost planning and cost control Procurement and tendering Contract administration support Financial reporting and valuations Technical and managerial support will also be available from the wider Design Services team and external specialist consultants where required

Join a global technology organisation whose products are trusted by leading brands and deliver real-world impact across sustainability, education and safety. This is a pivotal role, reporting to the Head of Engineering helping lead tech direction and delivery for some genuinely innovative products. The Role Act as the technical SME across multiple engineering teams including (Web Applications, GIS and Robotics) Provide hands-on technical leadership-shaping architecture, improving products and unblocking delivery. Solve complex engineering problems and drive best practice across the organisation. Requirements 5+ years' experience as a Principal Software Engineer (or similar) in an enterprise environment. Proven track record leading across multiple engineering teams and specialties. Experience with Event-driven architectures. Strong technical breadth across C#, .NET, SQL, Kafka and Azure (Java is a plus). Agile Leadership Desirable The role has no direct reports, but established leadership skills are desirable Distributed systems and real-time data processing. Application and platform security fundamentals. Please apply to this advert or email your CV direct to (url removed) Please note; sponsorship is not available for this role. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.

Role: Senior Azure Platform Engineer Location: Manchester city centre Working Arrangement: Ideally 2 days per week in office but open to once per month in the office if needed Salary: Up to £90k plus benefits Key skills; Azure, AKS/Kubernetes, Terraform, Golang, AI tooling and platform engineering automation You ve spent years building and improving cloud platforms. You know what good infrastructure looks like, how to scale systems properly, and how to create environments that engineers actually enjoy working in. You re probably the person people come to when things get complicated. Whether that s improving Kubernetes environments, designing resilient Azure infrastructure, fixing bottlenecks in CI/CD pipelines, or helping teams adopt better engineering practices, you re the one who figures it out. You re also curious about where engineering is heading next, especially when it comes to AI. That s exactly why this role could be worth your attention. I m working with a technology business that is going all-in on AI across its engineering and platform function. They re investing heavily in AI-assisted tooling, automation, operational intelligence, and developer experience improvements, and they want Platform Engineers who are excited about being part of that journey. You ll be working in an environment where tools like GitHub Copilot, OpenAI models, Claude, Gemini, AI-powered observability platforms, intelligent deployment workflows, and internal AI tooling are actively being explored and introduced to improve how engineering teams work day to day. This isn t about ticking a buzzword box. They genuinely want to build a modern engineering environment where AI helps reduce repetitive work, improve operational visibility, speed up delivery, and make developers more effective. From a technical perspective, this is a senior, hands-on platform engineering role where you ll have a lot of influence over how things are built moving forward. You ll be designing and improving Azure infrastructure, evolving Kubernetes platforms within AKS, building reusable Infrastructure-as-Code patterns using Terraform and Crossplane, and helping improve reliability, observability, and security across the wider platform estate. You ll also spend time improving developer tooling and CI/CD processes, helping engineering teams deploy faster and more safely while reducing friction wherever possible. They re looking for someone who enjoys ownership. Someone who can lead large technical initiatives, mentor other engineers, and help shape engineering standards, while still being close to the technology. Technically, you ll need strong experience with: Azure cloud environments Kubernetes and AKS Terraform and Infrastructure-as-Code Golang CI/CD tooling and automation Observability tooling such as Prometheus, Grafana, Datadog, or LGTM stacks Platform reliability, scalability, and security best practices If you ve worked in platform engineering, DevOps, SRE, or cloud infrastructure environments where you ve helped modernise systems and improve engineering practices at scale, you ll likely fit in very well here. There s also plenty of room for progression. The platform function is continuing to grow, so this role has a clear path towards future Staff or Principal-level opportunities over time. On top of the salary, there s a strong benefits package including enhanced annual leave, personal training budgets, enhanced pension contributions, hybrid working, company-paid sick leave, enhanced family policies, and additional flexibility around holidays and working arrangements. If you re looking for a role where you can work with modern cloud technology, influence technical direction, and help shape how AI is integrated into platform engineering, this could be a very good fit for you. We welcome diverse applicants and are dedicated to treating all applicants with dignity and respect, regardless of background.

The Sterling Thermal Technology team is fast-growing and ambitious, working together to partner and pioneer at the forefront of our industry. What we create together matters. The Role The purpose of the role is to supervise the day-to-day Drawing Office activities, including staffing, in the compilation of detailed engineering drawings and models to meet customer specifications. You will ensure that suitable processes are developed to control all data and information. Accuracy of builds, adopting DFM techniques, is critical. Who You Will Interact With Directly supervising: Drawing Office at Aylesbury. Staff relations: All company personnel. General Duties Always look after the company s interests. Maintain strict confidentiality on all matters relating to company business. Ensure that the company s procedures are always followed. Observe and promote all safe working practices. Specific Duties Ensure robust processes and procedures are maintained within the Aylesbury site, always adopting best practice. Ensure that adequately trained and competent capacity exists to fulfil all drawing office requirements. Plan and schedule all work in line with agreed timescales and manage the resources available to ensure deadlines are met. Create both 3D and 2D models and drawings (as required) that meet build requirements within timescales and budgets. Ensure operators check their own work and take responsibility for errors and omissions, including the construction of BOMs. Utilise the CAD system to identify any errors for build adopting, Design for Manufacture. Create drawings in line with general engineering practices, adhering to BS8888 (geometrical tolerancing and engineering) standards or any other applicable or customer-driven specifications. Implement detailed design reviews as required with relevant team members in line with procedures to effect a prompt and detailed handover to Production. Manage the EPDM system, ensuring that revision and issue control are maintained utilising a drawing and data vault. Ensure detailed product libraries are used within SolidWorks in line with part numbering systems. Reduce and simplify the quantity of drawings being produced to a lean state. Ensure the transmittal note system for the issuing of drawings and data, both internally and externally, when releasing/handing over to Production, works effectively. Ensure that all drawing and BOM changes are controlled through the relevant ECN procedures and that these are actioned before the despatch of product to ensure that the design data remains current. Report on key performance indicators that determine effectiveness but especially concentrate on OTD (on-time delivery) of drawings and RFT (right-first-time release). Initiate cost reduction improvements whenever possible. Liaise with all relevant disciplines within the company and, in particular, with Production, on all aspects of designs to ensure that output is appropriate to the efficient and accurate production of equipment. Maintain detailed design standards for the build and construction of all product types. Assist the technical department with any R&D activities as deemed necessary. Key Results Areas Planning and production of mechanical engineering drawings and associated documentation within specified times and with minimum problems at all stages. Continuous improvement of Drawing Office output in terms of accuracy and effectiveness. A coordinated approach to production processes between Engineering and Production departments. Drawings and BOMs produced comply with all relevant specifications. Resources Staff: Assistance as required. Equipment: Principally SolidWorks 3-D CAD, EPDM, Epicor and Microsoft Office software. Computers and printers/photocopiers/scanners available as required. How We ll Support You The training and development aspects of the position will be discussed and agreed with your line manager. Benefits Package 25 days holiday and bank holidays. Life assurance. Pension. Health cash plan. On-site parking. On-site electric charging points. Social events. Seasonal flu jabs. For further information and to apply, please visit our website via the Apply button. Closing date: Friday, 19th June 2026.

Principal Engineer - Product Safety Glasgow, Bristol or Crewe (Hybrid - minimum 2 days onsite) Up to 68,500 (DOE) Full-time Permanent About the Role We are looking for a Principal Engineer - Product Safety to play a critical role in ensuring the safety of complex, safety-critical engineering systems. You will lead on hazard identification, risk analysis and safety case development , working closely with Technical Authorities to ensure that products meet stringent safety requirements across the full engineering lifecycle. This is a key position where you'll act as both a technical specialist and a thought leader , influencing design decisions and ensuring risks are reduced as low as reasonably practicable. Key Responsibilities Lead hazard identification, risk assessment and mitigation activities Develop and maintain hazard logs and safety case arguments Conduct and facilitate HAZID workshops and safety reviews Support Technical Authorities in ensuring safe design solutions Assess product safety across complex subsystems and technologies Review and verify quality and completeness of safety submissions Lead on product safety activities within assigned equipment areas Support and guide junior engineers where required Skills & Experience Required Strong knowledge of product safety management processes Experience across multiple phases of the engineering lifecycle (LCM) Understanding of through-life engineering and design integration Familiarity with key safety standards, including: DSA-02 JSP 430 Def Stan 00-56 MIL-STD-882E BS EN 61508 Ability to produce high-quality technical documentation Strong stakeholder engagement and influencing skills About the Team You'll join a collaborative Product Safety team working across large-scale, complex engineering programmes . You may be supporting a major platform programme or working across multiple smaller projects, gaining exposure to a wide range of technologies and engineering disciplines. You will play a key part in supporting Technical Authorities , helping shape safety strategies and ensuring robust safety arguments are developed and evidenced throughout the lifecycle. What's on Offer Competitive salary up to 68,500 Hybrid and flexible working arrangements Strong focus on career development and progression Support towards professional accreditation (IEng/CEng) Comprehensive benefits package covering wellbeing, lifestyle and financial support Security Requirements Due to the nature of the work, candidates must be eligible for BPSS clearance , with potential for higher levels depending on project assignments. Apply Now If you're an experienced Product Safety Engineer looking to take a lead role on complex, high-impact programmes , we'd love to hear from you.

Lead Test Engineer - Inside IR35 - 600 to 640 per day via umbrella - 12-month contract - SC Clearance is essential (Experience in driving or supporting transformation from monolithic systems to distributed micro-services architectures in Java - is essential) Start date - 25/05/2026 is essential Leeds or Manchester based - in the office not home based Essential Skills & Experience: Technical Expertise: Strong experience designing and implementing test strategies for microservices environments Hands-on automation experience using: o Java, Selenium, Rest Assured o API, contract, and integration testing ( Experience working with monolith and microservices systems is essential) Knowledge of: o CI/CD pipelines o Spring Boot-based applications o Performance testing fundamentals Modern Testing Practices: o Contract testing, API testing, and asynchronous messaging (e.g. Kafka) o Non-functional testing (performance, accessibility) Experience with non-relational databases (e.g. MongoDB) Automation-first mindset with ability to build reusable, maintainable frameworks Leadership: Experience operating at Lead / Principal level Ability to influence stakeholders without direct authority Strong communication skills across technical and non-technical audiences Tools & Technologies Cloud: AWS Test Frameworks: Selenium, Serenity BDD, Playwright Contract Testing: Pactflow, Spring Cloud Contract Messaging: Kafka Databases: MongoDB CI/CD & DevOps: GitHub, GitLab, Jenkins, Docker Performance Testing: Gatling, K6 Observability: Grafana, Prometheus, Splunk What We're Looking For A hands-on technical leader who can set direction and deliver Someone comfortable working across multiple teams and scaling best practice A proactive problem-solver with a strong quality-first mindset Please note you will receive an automated response advising you that we have received your CV. Morgan Philips Group is a global talent solutions business that disrupts conventional thinking in executive search, recruitment and talent consulting. We operate in over 18 markets in Europe, North & South America, Asia, and the Middle East & Africa. We understand that the future is digital and social, so we embrace the latest technology, including video ads and CVs, as well as social recruiting. Our innovative services are tailored to the new world of work yet we do not lose sight of the fact that employees be they existing and potential are ultimately human beings. We are committed to ensuring that all job applicants are treated equally, without discrimination because of gender, sexual orientation, marital or civil partner status, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age.

Principal Embedded Software Engineer Location: Fareham, Hampshire (Hybrid working available) Salary: £70,000 £80,000 Job Type: Full-time, Permanent Visa Sponsorship Available An advanced technology company based in Fareham, Hampshire is looking to recruit a Principal Embedded Software Engineer to join its growing engineering team. This is a senior-level opportunity for an experienced engineer to lead the development of embedded software and algorithms, working across the full product lifecycle while mentoring engineers and driving technical excellence. The Role As a Principal Embedded Software Engineer, you will take ownership of the design, development and delivery of embedded software solutions. You will lead technical direction, coordinate cross-functional teams and ensure high-quality delivery across complex engineering projects. This role combines hands-on development with technical leadership, offering the opportunity to work on cutting-edge technology and influence product direction. Key Responsibilities Technical Leadership & Delivery Lead end-to-end development of embedded software and firmware solutions Define software architecture and key design decisions Coordinate project delivery, ensuring timelines and quality targets are met Provide technical guidance and mentorship to engineers Drive Agile/SCRUM processes including sprint planning and reviews Collaborate with cross-functional teams including hardware and systems engineers Manage technical risks, dependencies and trade-offs across projects Act as a key technical interface for internal and external stakeholders Technical Responsibilities Develop embedded firmware using C and low-level programming techniques Design, implement, debug and test software for embedded systems Develop and optimise algorithms using tools such as Python or MATLAB Work on low-level drivers and hardware interaction Support system integration and troubleshooting on embedded platforms Contribute across the full software development lifecycle What We re Looking For Essential: Degree in Electronics, Computer Science, Software Engineering or similar Strong experience in embedded software development using C Proven experience leading or coordinating technical projects Experience working across the full software development lifecycle Strong understanding of software architecture and system design Hands-on experience with embedded systems debugging and development Experience using version control tools such as Git or SVN Strong communication skills and ability to work across multidisciplinary teams Desirable: Experience with high-level languages such as Python, MATLAB or LabVIEW Knowledge of Digital Signal Processing (DSP) or similar algorithms Experience with Agile development methodologies Familiarity with test-driven development or behaviour-driven development Why Apply? Salary £70,000 £80,000 Senior, technically influential role within a growing engineering team Opportunity to lead projects and mentor engineers Work on advanced technology and complex systems Hybrid working and strong benefits package Visa sponsorship available To Apply For more information or to apply, please contact: Lewis Phillips (phone number removed) (url removed)

Senior Structural and Mechanical Systems Engineer Space/Satellite Guildford Hybrid Competitive salary & package We are seeking a Senior Structural and Mechanical Systems Engineer to help shape and influence current and future flight spacecraft structures and mechanical systems. As part of the mechanical team, you will play a vital role in spacecraft layout, structural developments, and the analysis of new structural systems. You will oversee structural and mechanical sub-systems from concept through to ground verification testing and flight, working closely with mechanical design and principal engineers. The role involves a combination of structural design, analysis, and testing activities, as well as supporting the development of spacecraft mechanical systems to ensure reliable operation in demanding environments. This work focuses on delivering innovative and robust solutions for spacecraft structures and mechanical systems Key Tasks Technical Leadership : Serve as the Technical Lead for structural and mechanical system design for spacecraft structures. Work Package Management: Develop and maintain schedules and budgets for mechanical and structural Work Packages, reporting budget and schedule deviations and managing risks. Risk Management: Identify, monitor, and mitigate structural and mechanical systems risks. Requirement Management: Flow down customer requirements to subsystem and hardware levels, ensuring compliance and validation. Development Plans: Define, organise, and implement structural development, qualification, and validation plans. Finite Element Analysis (FEA) and Analytical Modelling: Develop and manage analytical models for structures and subsystems using FEA, performing static, dynamic, and quasi-static analyses to validate numerical results with test data and determine structural margins of safety. Refine numerical models to ensure alignment with experimental data. Environmental Specifications : Derive environmental envelope specifications from launch documentation, analytical results, and test data. Mass Properties Management: Manage structural and system mass properties including mass, centre of gravity and moments/ products of inertia. Test Campaigns: Define, organise, and lead structural testing (vibration, static, acoustic, shock, and mass properties) Documentation: Maintain design/analysis logs, document analysis activities, and write test and compliance reports. Customer Engagement: Present work at internal and external reviews, ensuring effective communication and reporting. PERSON SPECIFICATION Qualifications A good degree in Mechanical Engineering or equivalent Experience 10+ years analytical design experience for structures Knowledge & Skills Use of software packages including Nastran, HyperMesh, SmartOffice, MATLAB, Ansys Workbench, Solidworks Analysis of both lightweight metallic and composite materials to provide margin of safety/reserve factors using a combination of hand stressing and FEA. Experience of spacecraft level static, dynamic and thermo-elastic analysis using the latest FEA tools. Exposure to spacecraft development and qualification planning Experience of spacecraft mechanical testing such as vibration, static and shock. Ability to manage work packages and be responsible for delivery of work to budget and on schedule Good management and organisational skills Benefits Highly competitive Salary. Flexible working policies. 32 days annual leave + BH. Annual Company Bonus Scheme. Up to 8% employer pension contribution. Life Assurance (6X salary). Private Health Care. Enhanced Maternity & Paternity leave. Multiple Discount, Memberships schemes.