Technician - Trains Location: Southampton Contract: 12 months, potential for extension Shifts: Nights, 5 on and 5 off Start Date: 29th June Training/shadowing period will be days. Pay Rates: Umbrella: 30.42 per hour (the rate includes 130% night shift uplift) PAYE: 23.17 per hour (the rate includes 130% night shift uplift) Role Overview We are looking for skilled Technicians to support a major Rolling Stock project, working on a variety of rail fleets within a modern, well-equipped depot. You'll be responsible for overhaul, repair, and modification activities on wheelsets, bogies, and associated components, working to all required safety and quality standards. Key Responsibilities Conduct initial inspections of wheelsets and bogies, recording all findings accurately. Safely remove axle bearings, wheel pans, and other components without causing damage. Carry out paint removal, surface defect removal, and general component preparation. Perform oil draining/filling on wheelset gearboxes, couplings, and related parts. Remove and disassemble wheelsets and frames in line with engineering procedures. Repair and reassemble components following technical guidelines. Assist the wider team with bogie and wheelset overhauls, supporting collaborative working and skill development. Identify and collect required materials and spares from stores. Support general depot and rolling stock cleaning when required. Principal Accountabilities Deliver high-quality mechanical repairs, modifications, and overhauls as part of the Engineering Team. Work safely and efficiently within a structured maintenance environment. Ensure all work is completed to the required technical and safety standards. Knowledge & Experience Required Background in mechanical or electrical engineering or a similar process-based environment. Basic fault-finding skills. Ability to accurately record work completed and follow all procedures. Strong understanding of safe use and care of tools, equipment, and PPE. Knowledge of Health & Safety requirements, including manual handling, COSHH, and biohazards. Computer literacy and the ability to interpret technical documents. Capable of producing detailed technical reports when required. All PPE provided by the client and Health and Safety explained before and on site. Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. INDTR-PW Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
Jun 24, 2026
Contractor
Technician - Trains Location: Southampton Contract: 12 months, potential for extension Shifts: Nights, 5 on and 5 off Start Date: 29th June Training/shadowing period will be days. Pay Rates: Umbrella: 30.42 per hour (the rate includes 130% night shift uplift) PAYE: 23.17 per hour (the rate includes 130% night shift uplift) Role Overview We are looking for skilled Technicians to support a major Rolling Stock project, working on a variety of rail fleets within a modern, well-equipped depot. You'll be responsible for overhaul, repair, and modification activities on wheelsets, bogies, and associated components, working to all required safety and quality standards. Key Responsibilities Conduct initial inspections of wheelsets and bogies, recording all findings accurately. Safely remove axle bearings, wheel pans, and other components without causing damage. Carry out paint removal, surface defect removal, and general component preparation. Perform oil draining/filling on wheelset gearboxes, couplings, and related parts. Remove and disassemble wheelsets and frames in line with engineering procedures. Repair and reassemble components following technical guidelines. Assist the wider team with bogie and wheelset overhauls, supporting collaborative working and skill development. Identify and collect required materials and spares from stores. Support general depot and rolling stock cleaning when required. Principal Accountabilities Deliver high-quality mechanical repairs, modifications, and overhauls as part of the Engineering Team. Work safely and efficiently within a structured maintenance environment. Ensure all work is completed to the required technical and safety standards. Knowledge & Experience Required Background in mechanical or electrical engineering or a similar process-based environment. Basic fault-finding skills. Ability to accurately record work completed and follow all procedures. Strong understanding of safe use and care of tools, equipment, and PPE. Knowledge of Health & Safety requirements, including manual handling, COSHH, and biohazards. Computer literacy and the ability to interpret technical documents. Capable of producing detailed technical reports when required. All PPE provided by the client and Health and Safety explained before and on site. Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. INDTR-PW Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
Production Technician - Rolling Stock (Trains) Location: Northampton Contract Duration: 6 Months' Minimum Shifts: 12 hour days / nights (Apply online only), (Apply online only) Pay Rates: 26.56 for the first 12 weeks (Umbrella), then increasing to 27.99 per hour (Umbrella) or 21.32 per hour PAYE Your Responsibilties: Working as part of the Engineering team, this challenging role involves mechanical production duties - gearboxes, mod repairs and Production of rolling stock assets. Supporting with the completion of repairs, modifications, commission within a well-equipped rolling stock depot With minimal supervision undertake Modification of the allocated rolling stock to meet the requirements of the modification and production plan. Undertake any other duties as and when required within the scope of the modification and production work Working underneath the specified engineering instructions and drawings, following the methods and tooling specified within them. Knowledge & Experience: Must have relevant experience in an engineering environment Ability to complete all records of actions and operations accurately and to procedures Knowledge of Health & Safety including bio-hazards, manual handling and Control of Substances Hazardous to Health (COSHH) Ability to use a laptop for diagnostic purposes Ability to understand and interpret relevant technical publications Knowledge of Health & Safety including biohazards, manual handling and Control of Substances Hazardous to Health (COSHH) Ability to understand and care for tools, equipment, and PPE Ability to understand and interpret relevant technical publications Ability to use a laptop for diagnostic fault finding and rectification purposes Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
Jun 24, 2026
Contractor
Production Technician - Rolling Stock (Trains) Location: Northampton Contract Duration: 6 Months' Minimum Shifts: 12 hour days / nights (Apply online only), (Apply online only) Pay Rates: 26.56 for the first 12 weeks (Umbrella), then increasing to 27.99 per hour (Umbrella) or 21.32 per hour PAYE Your Responsibilties: Working as part of the Engineering team, this challenging role involves mechanical production duties - gearboxes, mod repairs and Production of rolling stock assets. Supporting with the completion of repairs, modifications, commission within a well-equipped rolling stock depot With minimal supervision undertake Modification of the allocated rolling stock to meet the requirements of the modification and production plan. Undertake any other duties as and when required within the scope of the modification and production work Working underneath the specified engineering instructions and drawings, following the methods and tooling specified within them. Knowledge & Experience: Must have relevant experience in an engineering environment Ability to complete all records of actions and operations accurately and to procedures Knowledge of Health & Safety including bio-hazards, manual handling and Control of Substances Hazardous to Health (COSHH) Ability to use a laptop for diagnostic purposes Ability to understand and interpret relevant technical publications Knowledge of Health & Safety including biohazards, manual handling and Control of Substances Hazardous to Health (COSHH) Ability to understand and care for tools, equipment, and PPE Ability to understand and interpret relevant technical publications Ability to use a laptop for diagnostic fault finding and rectification purposes Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Mechanical Maintenance Engineer. What s on offer: Day shift only with early finish on Fridays to enjoy the weekend! Overtime available £45k Neg DOE basic for day shift ! Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Maintenance of all onsite machinery and equipment to allow optimum production levels. Responding to machine breakdowns on heavy machines Efficient fault finding and repairs on heavy machines and heavy equipment. Timely completion of PPM as per schedules Check and calibrate instruments and equipment. Organization of on-site machine servicing contractors Flexible to undertake domestic maintenance/repairs as required. About you: You will have excellent mechanical skills with a bias to moving parts machines Proven experience within a reactive maintenance environment Experience of repairs of CNC machines and manual machinery would be an advantage Proficient at reading engineering drawings and schematics Ability to work efficiently under pressure and manage a varied workload. Recognised apprenticeship qualification or time served equivalent. This role offers a fantastic opportunity for someone that likes a varied role, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
Jun 24, 2026
Full time
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Mechanical Maintenance Engineer. What s on offer: Day shift only with early finish on Fridays to enjoy the weekend! Overtime available £45k Neg DOE basic for day shift ! Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Maintenance of all onsite machinery and equipment to allow optimum production levels. Responding to machine breakdowns on heavy machines Efficient fault finding and repairs on heavy machines and heavy equipment. Timely completion of PPM as per schedules Check and calibrate instruments and equipment. Organization of on-site machine servicing contractors Flexible to undertake domestic maintenance/repairs as required. About you: You will have excellent mechanical skills with a bias to moving parts machines Proven experience within a reactive maintenance environment Experience of repairs of CNC machines and manual machinery would be an advantage Proficient at reading engineering drawings and schematics Ability to work efficiently under pressure and manage a varied workload. Recognised apprenticeship qualification or time served equivalent. This role offers a fantastic opportunity for someone that likes a varied role, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
Carpenter / Joiner - Track Workshops (NIGHT SHIFT) Location: London Duration: 6-month contract Pay Rate: £50.34 per hour An exciting opportunity for an experienced Carpenter/Joiner to join a specialist workshop team supporting key infrastructure works on a major London transport network. The role involves the manufacture, repair, and installation of precision timber components for use across the network. Key Responsibilities: Manufacture, modify, and repair timber components to spec Install timber items on site when required Operate hand and power tools, wood machines, and workshop equipment Work from technical drawings and templates Drive workshop vehicles to and from work sites (if required) Maintain a clean, safe working environment Requirements: Apprenticeship or equivalent hands-on joinery experience Skilled in reading engineering drawings and producing timber assemblies Comfortable using machinery, overhead cranes, and mechanical handling tools Able to apply finishes and safely handle workshop solutions We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on or email your CV and covering letter . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Jun 24, 2026
Contractor
Carpenter / Joiner - Track Workshops (NIGHT SHIFT) Location: London Duration: 6-month contract Pay Rate: £50.34 per hour An exciting opportunity for an experienced Carpenter/Joiner to join a specialist workshop team supporting key infrastructure works on a major London transport network. The role involves the manufacture, repair, and installation of precision timber components for use across the network. Key Responsibilities: Manufacture, modify, and repair timber components to spec Install timber items on site when required Operate hand and power tools, wood machines, and workshop equipment Work from technical drawings and templates Drive workshop vehicles to and from work sites (if required) Maintain a clean, safe working environment Requirements: Apprenticeship or equivalent hands-on joinery experience Skilled in reading engineering drawings and producing timber assemblies Comfortable using machinery, overhead cranes, and mechanical handling tools Able to apply finishes and safely handle workshop solutions We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on or email your CV and covering letter . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Maintenance Engineer. What s on offer: Days and early shifts ONLY with early finish on Fridays to enjoy the weekend! up to 45k basic for day shifts NEG DOE lots of overtime available Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Maintenance of all onsite machinery and equipment to allow optimum production levels. Responding to CNC breakdowns including turning, milling, and grinding machines Efficient fault finding and repairs on CNC machines and heavy equipment. Timely completion of PPM as per schedules Check and calibrate instruments and equipment. Organization of on-site machine servicing contractors Flexible to undertake domestic maintenance/repairs as required. About you: You will have excellent mechanical skills with a bias to CNC machinery/metal cutting. Proven experience within a reactive maintenance environment Experience of repairs of CNC machines and manual machinery Proficient at reading engineering drawings and schematics Ability to work efficiently under pressure and manage a varied workload. Recognised apprenticeship qualification or time served equivalent. This role offers a fantastic opportunity for someone that likes a varied role, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
Jun 24, 2026
Full time
My client, a specialist high precision component and machine manufacturer, have a fantastic opportunity for a Maintenance Engineer. What s on offer: Days and early shifts ONLY with early finish on Fridays to enjoy the weekend! up to 45k basic for day shifts NEG DOE lots of overtime available Great company team and culture Excellent pension scheme and life assurance Free onsite parking Sick pay scheme and cash health plan The Job: Maintenance of all onsite machinery and equipment to allow optimum production levels. Responding to CNC breakdowns including turning, milling, and grinding machines Efficient fault finding and repairs on CNC machines and heavy equipment. Timely completion of PPM as per schedules Check and calibrate instruments and equipment. Organization of on-site machine servicing contractors Flexible to undertake domestic maintenance/repairs as required. About you: You will have excellent mechanical skills with a bias to CNC machinery/metal cutting. Proven experience within a reactive maintenance environment Experience of repairs of CNC machines and manual machinery Proficient at reading engineering drawings and schematics Ability to work efficiently under pressure and manage a varied workload. Recognised apprenticeship qualification or time served equivalent. This role offers a fantastic opportunity for someone that likes a varied role, working with a niche precision engineering company that is highly respected throughout the world. Please apply with your CV to Janette Consulting for a further discussion about the role.
Multiskilled Maintenance Engineer Attleborough Shift pattern:2 Shifts Circa £54,000 Yolk Recruitment are supporting a leading manufacturing business in Norfolk to recruit an Multiskilled Maintenance Engineer for their high-volume production site near Attleborough. This is an excellent opportunity for a time-served, multi-skilled engineer to join a stable, growing business and play a key role in keeping a modern facility running efficiently. This is what you'll be doing. As an Multiskilled Maintenance Engineer, you'll be part of the site Engineering team, reporting into the Engineering Management structure. You will: Carry out planned preventative maintenance (PPM) and reactive maintenance on production equipment and site services Diagnose and resolve electrical and mechanical faults to minimise downtime and maintain production efficiency Accurately complete maintenance documentation, service reports and update maintenance systems Support continuous improvement activities and contribute technical ideas to improve reliability and performance Ensure all work is carried out in line with Health & Safety and environmental legislation and company procedures Work closely with production, engineering and external contractors to ensure safe, efficient operation of the plant Help to maintain key services such as electricity and compressed air and ensure they meet operational requirements The experience you'll bring to the team. You'll be a practical, hands-on engineer with a strong Multiskilled background and experience in a fast-moving manufacturing environment. Time-served multi-skilled engineer with a BTEC Level 3 (or equivalent) in Mechanical or Electrical engineering Proven experience in planned and reactive maintenance within a manufacturing / industrial environment Strong electrical fault-finding and problem-solving skills on low voltage panels, drives and inverters Confident communicator, able to work effectively with colleagues at all levels And this is what you'll get in return. Permanent role with an established manufacturing business with a great financial backing. Opportunity to work on a variety of equipment in a modern, high-volume plant Supportive Engineering team with a focus on safety, reliability and continuous improvement Ongoing training and development opportunities Salary of circa £49,000 Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
Jun 24, 2026
Full time
Multiskilled Maintenance Engineer Attleborough Shift pattern:2 Shifts Circa £54,000 Yolk Recruitment are supporting a leading manufacturing business in Norfolk to recruit an Multiskilled Maintenance Engineer for their high-volume production site near Attleborough. This is an excellent opportunity for a time-served, multi-skilled engineer to join a stable, growing business and play a key role in keeping a modern facility running efficiently. This is what you'll be doing. As an Multiskilled Maintenance Engineer, you'll be part of the site Engineering team, reporting into the Engineering Management structure. You will: Carry out planned preventative maintenance (PPM) and reactive maintenance on production equipment and site services Diagnose and resolve electrical and mechanical faults to minimise downtime and maintain production efficiency Accurately complete maintenance documentation, service reports and update maintenance systems Support continuous improvement activities and contribute technical ideas to improve reliability and performance Ensure all work is carried out in line with Health & Safety and environmental legislation and company procedures Work closely with production, engineering and external contractors to ensure safe, efficient operation of the plant Help to maintain key services such as electricity and compressed air and ensure they meet operational requirements The experience you'll bring to the team. You'll be a practical, hands-on engineer with a strong Multiskilled background and experience in a fast-moving manufacturing environment. Time-served multi-skilled engineer with a BTEC Level 3 (or equivalent) in Mechanical or Electrical engineering Proven experience in planned and reactive maintenance within a manufacturing / industrial environment Strong electrical fault-finding and problem-solving skills on low voltage panels, drives and inverters Confident communicator, able to work effectively with colleagues at all levels And this is what you'll get in return. Permanent role with an established manufacturing business with a great financial backing. Opportunity to work on a variety of equipment in a modern, high-volume plant Supportive Engineering team with a focus on safety, reliability and continuous improvement Ongoing training and development opportunities Salary of circa £49,000 Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
Maintenance EngineerPertemps are recruiting for a Maintenance Engineer on a 3-month fixed-term contract.Pay Rate: £20 per hourWe are seeking a motivated and safety-conscious engineer with mechanical and/or electrical engineering experience to support the operation and maintenance of renewable energy equipment. This role plays a key part in ensuring the safe, efficient and compliant running of plant operations, helping to convert organic food waste into clean energy.Key Responsibilities: Carry out planned preventative maintenance on mechanical, electrical and PLC systems Respond to equipment breakdowns and complete reactive repairs to minimise downtime Maintain and support specialist equipment, including CHP units, Grid Entry Units and biogas compressors Ensure all work is completed in accordance with health, safety and environmental procedures Monitor operational performance, recording data relating to gas quality, temperature control and feedstock management Participate in on-call rota duties and remote monitoring activities when required Support continuous improvement initiatives across the site About You: Qualified in Mechanical or Electrical Engineering, or able to demonstrate equivalent engineering experience Proven maintenance engineering experience within an industrial, process, manufacturing or similar environment Knowledge of planned preventative maintenance systems Strong understanding of health, safety and environmental practices Ability to work independently and as part of a team Self-motivated, proactive and adaptable approach to work Strong problem-solving skills and ability to prioritise workloads effectively Flexible and willing to work across a range of shift patterns to support operational requirements Full UK driving licence Knowledge of DSEAR and ATEX regulations Experience working with ISO 9001, ISO 14001 and ISO 45001 management systems COTC, IOSH, NEBOSH, confined space, working at height, first aid or banksman training The successful candidate will be comfortable working in a hands-on operational environment and carrying out physical engineering duties where required.To apply or find out more, contact Pertemps today.
Jun 23, 2026
Seasonal
Maintenance EngineerPertemps are recruiting for a Maintenance Engineer on a 3-month fixed-term contract.Pay Rate: £20 per hourWe are seeking a motivated and safety-conscious engineer with mechanical and/or electrical engineering experience to support the operation and maintenance of renewable energy equipment. This role plays a key part in ensuring the safe, efficient and compliant running of plant operations, helping to convert organic food waste into clean energy.Key Responsibilities: Carry out planned preventative maintenance on mechanical, electrical and PLC systems Respond to equipment breakdowns and complete reactive repairs to minimise downtime Maintain and support specialist equipment, including CHP units, Grid Entry Units and biogas compressors Ensure all work is completed in accordance with health, safety and environmental procedures Monitor operational performance, recording data relating to gas quality, temperature control and feedstock management Participate in on-call rota duties and remote monitoring activities when required Support continuous improvement initiatives across the site About You: Qualified in Mechanical or Electrical Engineering, or able to demonstrate equivalent engineering experience Proven maintenance engineering experience within an industrial, process, manufacturing or similar environment Knowledge of planned preventative maintenance systems Strong understanding of health, safety and environmental practices Ability to work independently and as part of a team Self-motivated, proactive and adaptable approach to work Strong problem-solving skills and ability to prioritise workloads effectively Flexible and willing to work across a range of shift patterns to support operational requirements Full UK driving licence Knowledge of DSEAR and ATEX regulations Experience working with ISO 9001, ISO 14001 and ISO 45001 management systems COTC, IOSH, NEBOSH, confined space, working at height, first aid or banksman training The successful candidate will be comfortable working in a hands-on operational environment and carrying out physical engineering duties where required.To apply or find out more, contact Pertemps today.
Role: Handy Person / Fabric Technician Shifts: Monday Friday 7 30 Salary: Up to £39,000 Opportunity: Fabric Technician required to support the maintenance and upkeep of 26 stations from Central London to the Southeast Coast. You ll be the driving force behind keeping stations safe, functional, and welcoming for both passengers and staff - handling a wide range of maintenance tasks that keep the network moving. If you thrive on variety, responsibility, and the satisfaction of seeing the impact of your work across an entire region, this is a standout opportunity to elevate your career. What you ll be doing: Delivering planned preventative maintenance (PPM) and reactive repairs across mechanical, and building fabric systems. Working with external contractors and internal teams to meet service standards and deadlines. Assisting with small-scale projects such as refurbishments and estate improvements. Carrying out practical maintenance tasks including door repairs, lighting fixes, PAT testing, basic plumbing, and general building upkeep. What we re looking for: Background in Fabric Technician, building services, or a similar multi-skilled engineering role. Detail-focused with a strong commitment to health & safety. Good communication skills and a collaborative working style. Full UK driving licence and willingness to travel within the region. About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
Jun 22, 2026
Full time
Role: Handy Person / Fabric Technician Shifts: Monday Friday 7 30 Salary: Up to £39,000 Opportunity: Fabric Technician required to support the maintenance and upkeep of 26 stations from Central London to the Southeast Coast. You ll be the driving force behind keeping stations safe, functional, and welcoming for both passengers and staff - handling a wide range of maintenance tasks that keep the network moving. If you thrive on variety, responsibility, and the satisfaction of seeing the impact of your work across an entire region, this is a standout opportunity to elevate your career. What you ll be doing: Delivering planned preventative maintenance (PPM) and reactive repairs across mechanical, and building fabric systems. Working with external contractors and internal teams to meet service standards and deadlines. Assisting with small-scale projects such as refurbishments and estate improvements. Carrying out practical maintenance tasks including door repairs, lighting fixes, PAT testing, basic plumbing, and general building upkeep. What we re looking for: Background in Fabric Technician, building services, or a similar multi-skilled engineering role. Detail-focused with a strong commitment to health & safety. Good communication skills and a collaborative working style. Full UK driving licence and willingness to travel within the region. About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
Maintenance Engineer - Romford - Essex Salary: 48,500 Shift Pattern: Monday-Friday + 1 in 3 Sundays 25 days holiday + B/H, ongoing training and development opportunities, enhanced maternity, paternity and adoption policies, employee assistance program We are recruiting for a leading UK company that plays an important role in supporting communities across the country. With lots of investment happening across all sites, it's a great time to join as the business continues to grow and improve the way it works. The company is focused on getting better every day, using new technology, and building for the future, making it a great place for engineers who want to learn, develop, and make a real difference. The Role Maintain and repair conveying systems and site facilities Work across mechanical and electrical systems Drive continuous improvement initiatives Support a fast-paced, high-volume environment Lead by example, ensuring safety and operational excellence About You Holds a recognised engineering apprenticeship Has experience in distribution, manufacturing, pharma, or FMCG Possesses a Level 3 engineering qualification Is confident working both mechanically and electrically Thrives under pressure and within tight deadlines Constantly seeks ways to improve processes and performance Benefits package 25 days annual leave Enhanced family leave (maternity, paternity & adoption) Employee assistance programme + wellbeing app Company pension (5% employee / 3% employer) Clear progression pathways - from senior roles to management and beyond This is more than just a job, it's an opportunity to be part of a business investing heavily in its people, technology, and future. You'll be surrounded by a team that values innovation, collaboration, and making a meaningful contribution every day. If you are interested in this opportunity or others please contact Emma Hardman at (url removed) for a confidential discussion If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 22, 2026
Full time
Maintenance Engineer - Romford - Essex Salary: 48,500 Shift Pattern: Monday-Friday + 1 in 3 Sundays 25 days holiday + B/H, ongoing training and development opportunities, enhanced maternity, paternity and adoption policies, employee assistance program We are recruiting for a leading UK company that plays an important role in supporting communities across the country. With lots of investment happening across all sites, it's a great time to join as the business continues to grow and improve the way it works. The company is focused on getting better every day, using new technology, and building for the future, making it a great place for engineers who want to learn, develop, and make a real difference. The Role Maintain and repair conveying systems and site facilities Work across mechanical and electrical systems Drive continuous improvement initiatives Support a fast-paced, high-volume environment Lead by example, ensuring safety and operational excellence About You Holds a recognised engineering apprenticeship Has experience in distribution, manufacturing, pharma, or FMCG Possesses a Level 3 engineering qualification Is confident working both mechanically and electrically Thrives under pressure and within tight deadlines Constantly seeks ways to improve processes and performance Benefits package 25 days annual leave Enhanced family leave (maternity, paternity & adoption) Employee assistance programme + wellbeing app Company pension (5% employee / 3% employer) Clear progression pathways - from senior roles to management and beyond This is more than just a job, it's an opportunity to be part of a business investing heavily in its people, technology, and future. You'll be surrounded by a team that values innovation, collaboration, and making a meaningful contribution every day. If you are interested in this opportunity or others please contact Emma Hardman at (url removed) for a confidential discussion If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Our client is seeking a skilled and proactive Electrical Maintenance Technician to join the team at their Barnsley site. If you have a strong background in machine repair, planned preventative maintenance (PPM), and problem solving, this is an excellent opportunity to take your career further in a dynamic, team-driven environment. You will join them on a full-time, permanent basis , and in return, you will receive a competitive salary. As one of the UK s leading manufacturers of Kitchen, Bedroom and Bathroom fitted furniture, our client has had unsuppressed growth, with almost 50 years experience. Their emphasis is on providing a high standard for all their products and the services they offer. They are currently seeking the very best people, to further strengthen their position within the industry by appointing dedicated individuals to share in their success The Electrical Maintenance Technician role: As part of their maintenance team, you ll play a key role in ensuring their production equipment runs efficiently, safely, and reliably. You ll be responsible for delivering high-quality maintenance support across a variety of plant systems and machinery, contributing directly to their operational success. The key responsibilities of their Electrical Maintenance Technician will include: Perform maintenance and repairs on production plant and equipment Carry out planned and preventative maintenance (PPM) to minimise downtime Be able to work well and communicate with on site contractors and remote service engineers Diagnose and resolve machine breakdowns swiftly and effectively Fault find on mechanical systems i.e. gearboxes etc. Have a good understanding of pneumatic and hydraulic circuits Maintain accurate records and reports within the CMMS system Manage and monitor stock levels of critical parts and equipment Mentoring of apprentices This is a hands-on role ideal for someone who thrives on technical challenges and takes pride in keeping operations running smoothly. To be successful in this Electrical Maintenance Technician role, you will: Be a qualified and experienced Maintenance Engineer, holding a minimum of 4 years industrial experience and NVQ Level 3 (or equivalent) in a relevant discipline. Have prior experience working within a fast-paced engineering or manufacturing environment. Be computer literate, with proven experience using CMMS systems. Demonstrate the ability to work independently and use your own initiative to solve problems effectively. Be flexible and willing to work overtime to support production demands and cover holidays or sickness within the department. Be able to work a 4 shift rota The department operates the following shifts:- Shift 1 6am - 2pm Monday to Friday Shift 2 2pm - 10pm Monday to Friday Shift 3 10pm - 6am Monday to Friday Shift 4 6am - 4pm Thursday to Sunday This position will be rewarded with a competitive salary. In order for you application to be taken further please state your required salary. If this sounds like the perfect opportunity for you and you d like to become their Electrical Maintenance Technician then please click apply today don t miss out, they d love to hear from you!
Jun 21, 2026
Full time
Our client is seeking a skilled and proactive Electrical Maintenance Technician to join the team at their Barnsley site. If you have a strong background in machine repair, planned preventative maintenance (PPM), and problem solving, this is an excellent opportunity to take your career further in a dynamic, team-driven environment. You will join them on a full-time, permanent basis , and in return, you will receive a competitive salary. As one of the UK s leading manufacturers of Kitchen, Bedroom and Bathroom fitted furniture, our client has had unsuppressed growth, with almost 50 years experience. Their emphasis is on providing a high standard for all their products and the services they offer. They are currently seeking the very best people, to further strengthen their position within the industry by appointing dedicated individuals to share in their success The Electrical Maintenance Technician role: As part of their maintenance team, you ll play a key role in ensuring their production equipment runs efficiently, safely, and reliably. You ll be responsible for delivering high-quality maintenance support across a variety of plant systems and machinery, contributing directly to their operational success. The key responsibilities of their Electrical Maintenance Technician will include: Perform maintenance and repairs on production plant and equipment Carry out planned and preventative maintenance (PPM) to minimise downtime Be able to work well and communicate with on site contractors and remote service engineers Diagnose and resolve machine breakdowns swiftly and effectively Fault find on mechanical systems i.e. gearboxes etc. Have a good understanding of pneumatic and hydraulic circuits Maintain accurate records and reports within the CMMS system Manage and monitor stock levels of critical parts and equipment Mentoring of apprentices This is a hands-on role ideal for someone who thrives on technical challenges and takes pride in keeping operations running smoothly. To be successful in this Electrical Maintenance Technician role, you will: Be a qualified and experienced Maintenance Engineer, holding a minimum of 4 years industrial experience and NVQ Level 3 (or equivalent) in a relevant discipline. Have prior experience working within a fast-paced engineering or manufacturing environment. Be computer literate, with proven experience using CMMS systems. Demonstrate the ability to work independently and use your own initiative to solve problems effectively. Be flexible and willing to work overtime to support production demands and cover holidays or sickness within the department. Be able to work a 4 shift rota The department operates the following shifts:- Shift 1 6am - 2pm Monday to Friday Shift 2 2pm - 10pm Monday to Friday Shift 3 10pm - 6am Monday to Friday Shift 4 6am - 4pm Thursday to Sunday This position will be rewarded with a competitive salary. In order for you application to be taken further please state your required salary. If this sounds like the perfect opportunity for you and you d like to become their Electrical Maintenance Technician then please click apply today don t miss out, they d love to hear from you!
Electrical Fitter Newcastle Upon Tyne Reporting to the Production Supervisor 2 Shift Pattern (early/ late) 23.05 per hour PAYE Role Overview: We are seeking a skilled Electrical Fitter to support the manufacture and assembly of advanced hydrogen power units. This role involves building, wiring, and testing electrical systems and control panels that form part of hydrogen-based energy solutions. The ideal candidate will have strong electrical experience, the ability to read technical drawings, and a keen focus on safety and quality in a clean manufacturing environment. Key Responsibilities: Assemble and wire electrical components, control panels, and sub-assemblies for hydrogen power units. Interpret electrical schematics, wiring diagrams, and layout drawings. Install cable containment systems (trunking, conduit, cable trays). Carry out point-to-point wiring and terminations to a high standard. Perform electrical testing (continuity, insulation resistance, functional checks). Support integration of components such as PLCs, sensors, and power distribution systems. Work closely with mechanical fitters and engineers during system build. Identify and report faults, discrepancies. Ensure all work complies with relevant standards. Maintain a clean, safe, and organised work environment. Follow strict safety procedures, especially when working with hydrogen-related systems. Skills, Experience & Qualifications: NVQ Level 3 in Engineering (Electrical or related discipline) - essential Proven experience as an Electrical Fitter, Panel Wirer, or Electrical Technician Ability to read and understand electrical drawings and schematics Experience with control panel wiring and electrical assembly Familiarity with industrial electrical components (relays, contactors, breakers, PLCs) Competence in using electrical testing equipment Strong attention to detail and commitment to quality Good problem-solving skills Ability to work independently and as part of a team Adhere to all company health and safety policies Follow safe working practices in environments involving hydrogen systems Use appropriate PPE at all times Participate in risk assessments and safety briefings Working Conditions: Workshop/manufacturing environment May involve standing for extended periods Occasional lifting of components and assemblies Potential for overtime depending on production demands Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1
Jun 21, 2026
Contractor
Electrical Fitter Newcastle Upon Tyne Reporting to the Production Supervisor 2 Shift Pattern (early/ late) 23.05 per hour PAYE Role Overview: We are seeking a skilled Electrical Fitter to support the manufacture and assembly of advanced hydrogen power units. This role involves building, wiring, and testing electrical systems and control panels that form part of hydrogen-based energy solutions. The ideal candidate will have strong electrical experience, the ability to read technical drawings, and a keen focus on safety and quality in a clean manufacturing environment. Key Responsibilities: Assemble and wire electrical components, control panels, and sub-assemblies for hydrogen power units. Interpret electrical schematics, wiring diagrams, and layout drawings. Install cable containment systems (trunking, conduit, cable trays). Carry out point-to-point wiring and terminations to a high standard. Perform electrical testing (continuity, insulation resistance, functional checks). Support integration of components such as PLCs, sensors, and power distribution systems. Work closely with mechanical fitters and engineers during system build. Identify and report faults, discrepancies. Ensure all work complies with relevant standards. Maintain a clean, safe, and organised work environment. Follow strict safety procedures, especially when working with hydrogen-related systems. Skills, Experience & Qualifications: NVQ Level 3 in Engineering (Electrical or related discipline) - essential Proven experience as an Electrical Fitter, Panel Wirer, or Electrical Technician Ability to read and understand electrical drawings and schematics Experience with control panel wiring and electrical assembly Familiarity with industrial electrical components (relays, contactors, breakers, PLCs) Competence in using electrical testing equipment Strong attention to detail and commitment to quality Good problem-solving skills Ability to work independently and as part of a team Adhere to all company health and safety policies Follow safe working practices in environments involving hydrogen systems Use appropriate PPE at all times Participate in risk assessments and safety briefings Working Conditions: Workshop/manufacturing environment May involve standing for extended periods Occasional lifting of components and assemblies Potential for overtime depending on production demands Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1
Walker Group provides advanced high-precision manufacturing services from centres of excellence located in the UK and Poland. Due to ongoing demand, we have an exciting opportunity to join our team in Glasgow as a EDM Engineer. As EDM Engineer, you will be responsible for setting up and operating Spark and Wire Erosion machines to perform EDM precision machining operations. EDM Engineer Key Responsibilities: Oversee Machinery set-up and operate machines Loading materials and unloading finished products Adjust machine settings as required Follow technical drawings working to customer tolerances Carefully follow procedures and safety guidelines. Including company procedures, operating standards, and process documentation Maintain an accurate log of production and equipment problems, adjustments, and repairs. Machine inspections for mechanical or safety issues Ensure machines are well stocked with tooling and material to ensure limited downtime Safety focus to ensure themselves and others are safe around operational machinery Flexibility to support production requirements during busier periods EDM Engineer Skills & Behaviours: Strong attention to detail and a commitment to producing high-quality work Excellent communication and teamwork skill Ability to follow instructions EDM Engineer Qualifications & Experience: Time served EDM Engineer Experience in Spark Erosion & Wire Erosion Ability to read technical drawings Experience of working to high quality standards on precision components Knowledge of safety and manufacturing regulations and procedures What's in it for you? Full time, permanent contract, working 37 hours per week, Monday to Friday on a three-shift rotation, covering early, back and night shift Attractive rate of pay plus shift allowance You'll gain access to the following company benefits: pension, life insurance, private medical healthcare, prescription protection eyewear, employee retail discounts You will receive 33 days holiday per year which includes a Christmas closure Access to online learning platforms to support your development You'll have ample opportunities to grow and develop within the team, while working in a supportive and collaborative environment Interested? Click on the Apply button today! We look forward to hearing from you!
Jun 21, 2026
Full time
Walker Group provides advanced high-precision manufacturing services from centres of excellence located in the UK and Poland. Due to ongoing demand, we have an exciting opportunity to join our team in Glasgow as a EDM Engineer. As EDM Engineer, you will be responsible for setting up and operating Spark and Wire Erosion machines to perform EDM precision machining operations. EDM Engineer Key Responsibilities: Oversee Machinery set-up and operate machines Loading materials and unloading finished products Adjust machine settings as required Follow technical drawings working to customer tolerances Carefully follow procedures and safety guidelines. Including company procedures, operating standards, and process documentation Maintain an accurate log of production and equipment problems, adjustments, and repairs. Machine inspections for mechanical or safety issues Ensure machines are well stocked with tooling and material to ensure limited downtime Safety focus to ensure themselves and others are safe around operational machinery Flexibility to support production requirements during busier periods EDM Engineer Skills & Behaviours: Strong attention to detail and a commitment to producing high-quality work Excellent communication and teamwork skill Ability to follow instructions EDM Engineer Qualifications & Experience: Time served EDM Engineer Experience in Spark Erosion & Wire Erosion Ability to read technical drawings Experience of working to high quality standards on precision components Knowledge of safety and manufacturing regulations and procedures What's in it for you? Full time, permanent contract, working 37 hours per week, Monday to Friday on a three-shift rotation, covering early, back and night shift Attractive rate of pay plus shift allowance You'll gain access to the following company benefits: pension, life insurance, private medical healthcare, prescription protection eyewear, employee retail discounts You will receive 33 days holiday per year which includes a Christmas closure Access to online learning platforms to support your development You'll have ample opportunities to grow and develop within the team, while working in a supportive and collaborative environment Interested? Click on the Apply button today! We look forward to hearing from you!
Rolling Stock Fitter (C4 Technician) Location: Cardiff Contract Type: Inside IR35 Rate: 33.00 per hour (Umbrella) Duration: 3-6 months initially, with potential for extension Positions Available: 3 Hours: 36 hours per week (Day & Afternoon Shifts) The Opportunity We are currently recruiting for several experienced Rolling Stock Fitters to support a major rolling stock overhaul programme based in Cardiff. This is an excellent opportunity to join a skilled maintenance team working on the overhaul and refurbishment of a fleet of diesel multiple units. The programme involves the overhaul of 18 units with a planned 20-day turnaround per vehicle. Essential Requirements Candidates must possess: NVQ Level 3, Apprenticeship, or equivalent qualification in a relevant mechanical, engineering, or rolling stock discipline Proven rolling stock maintenance, overhaul, or heavy maintenance experience Demonstrable C4 competency across the majority of the activities listed below C4 Experience Required Successful candidates should have experience in most of the following: Autocoupler removal and refit Intermediate Bar Coupler removal and refit Spring Box Assembly work Gangway removal and refit Gangway Flexi removal and refit Valve change-outs Bogie disconnection Centre Pivot / Pedestal removal and refit Hydraulic reservoir and hose removal and refit Key Responsibilities Carrying out mechanical overhaul, maintenance, and refurbishment activities Working to engineering standards, specifications, and maintenance instructions Ensuring all work is completed safely and in accordance with quality requirements Supporting the delivery of overhaul programmes to strict timescales Completing all associated documentation accurately and on time What's on Offer? 33.00 per hour (Umbrella) Long-term contract opportunity with extension potential Immediate starts available Opportunity to work on a significant rolling stock overhaul programme Stable shift pattern with consistent hours If you have the relevant C4 experience and rolling stock qualifications, we'd be keen to hear from you. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
Jun 20, 2026
Contractor
Rolling Stock Fitter (C4 Technician) Location: Cardiff Contract Type: Inside IR35 Rate: 33.00 per hour (Umbrella) Duration: 3-6 months initially, with potential for extension Positions Available: 3 Hours: 36 hours per week (Day & Afternoon Shifts) The Opportunity We are currently recruiting for several experienced Rolling Stock Fitters to support a major rolling stock overhaul programme based in Cardiff. This is an excellent opportunity to join a skilled maintenance team working on the overhaul and refurbishment of a fleet of diesel multiple units. The programme involves the overhaul of 18 units with a planned 20-day turnaround per vehicle. Essential Requirements Candidates must possess: NVQ Level 3, Apprenticeship, or equivalent qualification in a relevant mechanical, engineering, or rolling stock discipline Proven rolling stock maintenance, overhaul, or heavy maintenance experience Demonstrable C4 competency across the majority of the activities listed below C4 Experience Required Successful candidates should have experience in most of the following: Autocoupler removal and refit Intermediate Bar Coupler removal and refit Spring Box Assembly work Gangway removal and refit Gangway Flexi removal and refit Valve change-outs Bogie disconnection Centre Pivot / Pedestal removal and refit Hydraulic reservoir and hose removal and refit Key Responsibilities Carrying out mechanical overhaul, maintenance, and refurbishment activities Working to engineering standards, specifications, and maintenance instructions Ensuring all work is completed safely and in accordance with quality requirements Supporting the delivery of overhaul programmes to strict timescales Completing all associated documentation accurately and on time What's on Offer? 33.00 per hour (Umbrella) Long-term contract opportunity with extension potential Immediate starts available Opportunity to work on a significant rolling stock overhaul programme Stable shift pattern with consistent hours If you have the relevant C4 experience and rolling stock qualifications, we'd be keen to hear from you. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.
Our client is one of the worlds leading data centre specialists who maintain data centres in the UK, Europe and World Wide. They now have an opportunity for a Shift Leader to join the team on a permanent basis. The Responsibilities: Maintaining and keeping in good repair, the buildings mechanical & electrical systems along with all associated component parts of Data Centres. Routine tests, checks and record keeping for all the buildings systems HV Switching, writing HV/LV switching schedules Maintain water systems and all records to the highest standard in accordance with L8 Legislation. Undertake daily walk rounds of client areas and plant rooms to note and rectify any defects and to maintain Plant rooms in a clean, tidy and safe condition. Liaise and arrange sub contractor support and effectively manage and control all sub-contractors, including cleaning. To monitor the buildings environmental temperature, humidity, and space conditions and ensuring that they are maintained in accordance with the business requirement To monitor and adjust as deemed necessary, the building management systems (BMS) to control the buildings HVAC to optimal levels of efficiency. Provide rapid and effective response to customer and helpdesk calls and defects. Provide innovative solutions to improve building, plant and system energy efficiency. Manage, rectify and record defects through the Help Desk to ensure all are rectified within SLA timeframes. Keep the Shift Manager and Operations Manager briefed on all issues and progress. Raise hazard, incident and flash reports Use the Log Book System to store all records and certification for the site. Manage defects to completion; including full investigation, sourcing materials, provision of quotes, raising of Purchase Orders and arrangement of rectification. They are looking for a Shift Leader Salary including shift allowance 69,000 to 70,000 + Bonus + Annual Salary increases 4on, 4off, 4on, 6off, 6on, 4off Overtime Available at 1.5x hourly rate Pension 20 Shift Days Holiday Cycle to work Scheme Life Assurance Retail Discounts There will also be a great opportunity to progress within supervisory and management positions etc. To be considered for the post you will need to have relevant electrical qualifications and experience in a similar role carrying out building services maintenance in a critical environment. City and Guilds, NVQ or equivalent is essential Previous experience with HV in a Data Centre This job involves the maintenance and upkeep of the building systems, AHUs/Lighting/Power/UPS/HV/Generators/Cooling systems/BMS/Faultfinding etc. The HV ticket doesn't necessarily need to be in date. If you would like to be considered for this incredible job opportunity, apply now online or contact Tarik Bell-Ross on (phone number removed) / (url removed) RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Jun 20, 2026
Full time
Our client is one of the worlds leading data centre specialists who maintain data centres in the UK, Europe and World Wide. They now have an opportunity for a Shift Leader to join the team on a permanent basis. The Responsibilities: Maintaining and keeping in good repair, the buildings mechanical & electrical systems along with all associated component parts of Data Centres. Routine tests, checks and record keeping for all the buildings systems HV Switching, writing HV/LV switching schedules Maintain water systems and all records to the highest standard in accordance with L8 Legislation. Undertake daily walk rounds of client areas and plant rooms to note and rectify any defects and to maintain Plant rooms in a clean, tidy and safe condition. Liaise and arrange sub contractor support and effectively manage and control all sub-contractors, including cleaning. To monitor the buildings environmental temperature, humidity, and space conditions and ensuring that they are maintained in accordance with the business requirement To monitor and adjust as deemed necessary, the building management systems (BMS) to control the buildings HVAC to optimal levels of efficiency. Provide rapid and effective response to customer and helpdesk calls and defects. Provide innovative solutions to improve building, plant and system energy efficiency. Manage, rectify and record defects through the Help Desk to ensure all are rectified within SLA timeframes. Keep the Shift Manager and Operations Manager briefed on all issues and progress. Raise hazard, incident and flash reports Use the Log Book System to store all records and certification for the site. Manage defects to completion; including full investigation, sourcing materials, provision of quotes, raising of Purchase Orders and arrangement of rectification. They are looking for a Shift Leader Salary including shift allowance 69,000 to 70,000 + Bonus + Annual Salary increases 4on, 4off, 4on, 6off, 6on, 4off Overtime Available at 1.5x hourly rate Pension 20 Shift Days Holiday Cycle to work Scheme Life Assurance Retail Discounts There will also be a great opportunity to progress within supervisory and management positions etc. To be considered for the post you will need to have relevant electrical qualifications and experience in a similar role carrying out building services maintenance in a critical environment. City and Guilds, NVQ or equivalent is essential Previous experience with HV in a Data Centre This job involves the maintenance and upkeep of the building systems, AHUs/Lighting/Power/UPS/HV/Generators/Cooling systems/BMS/Faultfinding etc. The HV ticket doesn't necessarily need to be in date. If you would like to be considered for this incredible job opportunity, apply now online or contact Tarik Bell-Ross on (phone number removed) / (url removed) RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Multiskilled Maintenance Engineer (Electrical Bias with some mechanical expereince beneficial) 37.5 hours per week Location: Warrington (WA5) Shifts: 06:00-14:15 paid as £25p/h and 22:00-06:15 paid as £27/h plus overtime when required paid at time and a third Monday- Friday and weekends are paid at double time Salary: £50,700 Contract: Permanent, Full-time What's in it for you Competitive salary with structured pay increases 22 days holiday + 8 bank holidays Excellent pension scheme (5% employee / 3% employer) Free on-site parking State-of-the-art, clean, modern manufacturing site Long-term career stability with a company that values its people About the Company Our client is a market-leading UK manufacturer, trusted for over 40 years and now entering an exciting new growth phase. With a brand-new, high-tech site on the horizon, they're investing heavily in cutting-edge automated machinery and continuous improvement. You'll be joining a company that genuinely values engineering excellence where quality, innovation, and team longevity are part of the culture. Their product quality and warranty standards are second to none, and engineers here take pride in being part of something built to last. The Role You'll play a key part in maintaining and improving a high-volume automated manufacturing operation. This is a hands-on, proactive role where you'll diagnose, repair, and improve electrical and mechanical systems across modern production lines. Day to day, you will: Carry out planned and reactive maintenance on automated machinery Identify and resolve breakdowns efficiently to minimise downtime Ensure compliance with all safety and inspection standards Work closely with Production and Quality teams to optimise processes Contribute to continuous improvement and reliability initiatives What We're Looking For You're a practical problem-solver who loves getting to the root cause, not just fixing symptoms. You take pride in precision, enjoy a challenge, and thrive in a fast-moving environment. Essential experience & qualifications Time-served apprenticeship + ONC (or higher) in Electrical/Electronic Engineering Proven post-apprenticeship experience in an industrial/manufacturing setting Strong electrical fault-finding and maintenance skills Knowledge of mechanical, hydraulic, and pneumatic systems Confident using CMMS and other computer-based systems Personal attributes Analytical, systematic thinker with strong attention to detail Calm and methodical under pressure Able to work both independently and collaboratively Flexible, reliable, and motivated to learn Why You'll Love Working Here You'll work with the latest technology in an environment that's modern, clean, and well-organised no "make do and mend" culture. You'll be well rewarded for your skills with clear, structured pay progression. You'll join a company that keeps its people known for long service and genuine investment in staff. You'll have a voice: engineers are encouraged to bring ideas and shape how things are done. Interested? If you're ready to take the next step in your maintenance career, we'd love to hear from you. Send your CV (including salary expectations and notice period) to Or call Victoria O'Connor on to discuss the role in more detail.INDBSO
Jun 20, 2026
Full time
Multiskilled Maintenance Engineer (Electrical Bias with some mechanical expereince beneficial) 37.5 hours per week Location: Warrington (WA5) Shifts: 06:00-14:15 paid as £25p/h and 22:00-06:15 paid as £27/h plus overtime when required paid at time and a third Monday- Friday and weekends are paid at double time Salary: £50,700 Contract: Permanent, Full-time What's in it for you Competitive salary with structured pay increases 22 days holiday + 8 bank holidays Excellent pension scheme (5% employee / 3% employer) Free on-site parking State-of-the-art, clean, modern manufacturing site Long-term career stability with a company that values its people About the Company Our client is a market-leading UK manufacturer, trusted for over 40 years and now entering an exciting new growth phase. With a brand-new, high-tech site on the horizon, they're investing heavily in cutting-edge automated machinery and continuous improvement. You'll be joining a company that genuinely values engineering excellence where quality, innovation, and team longevity are part of the culture. Their product quality and warranty standards are second to none, and engineers here take pride in being part of something built to last. The Role You'll play a key part in maintaining and improving a high-volume automated manufacturing operation. This is a hands-on, proactive role where you'll diagnose, repair, and improve electrical and mechanical systems across modern production lines. Day to day, you will: Carry out planned and reactive maintenance on automated machinery Identify and resolve breakdowns efficiently to minimise downtime Ensure compliance with all safety and inspection standards Work closely with Production and Quality teams to optimise processes Contribute to continuous improvement and reliability initiatives What We're Looking For You're a practical problem-solver who loves getting to the root cause, not just fixing symptoms. You take pride in precision, enjoy a challenge, and thrive in a fast-moving environment. Essential experience & qualifications Time-served apprenticeship + ONC (or higher) in Electrical/Electronic Engineering Proven post-apprenticeship experience in an industrial/manufacturing setting Strong electrical fault-finding and maintenance skills Knowledge of mechanical, hydraulic, and pneumatic systems Confident using CMMS and other computer-based systems Personal attributes Analytical, systematic thinker with strong attention to detail Calm and methodical under pressure Able to work both independently and collaboratively Flexible, reliable, and motivated to learn Why You'll Love Working Here You'll work with the latest technology in an environment that's modern, clean, and well-organised no "make do and mend" culture. You'll be well rewarded for your skills with clear, structured pay progression. You'll join a company that keeps its people known for long service and genuine investment in staff. You'll have a voice: engineers are encouraged to bring ideas and shape how things are done. Interested? If you're ready to take the next step in your maintenance career, we'd love to hear from you. Send your CV (including salary expectations and notice period) to Or call Victoria O'Connor on to discuss the role in more detail.INDBSO
Job Title: Mechanical Fitter/Vehicle Builder - Contract OR Permanent Location: Milton Keynes Salary: Competitive + plus shift allowance Contract hourly rate: Competitive Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer About the Role: We are currently seeking experienced Mechanical Fitters to join a leading Engineering company based in Milton Keynes. In this role, you will have the opportunity to work on either the 150s or the West Repair Project, focusing on Rolling Stock. The position involves working shifts, including earlies (6am-2pm) or lates (2pm-10pm). For the West Repair Project, there may be occasional night shifts. Key Responsibilities: Conducting vehicle building tasks according to project requirements Performing repairs, maintenance, and inspections on trains Stripping and re-fitting of mechanical components Stripping and re-fitting of seats Stripping and re-fitting of hand rails & grab rails Stripping and re-fitting of underframe Adhering to safety protocols and quality standards Collaborating with team members to ensure efficient workflow Following shift schedules and meeting project deadlines Requirements: Previous experience as a Vehicle Builder or similar role Knowledge of vehicle assembly, repair, and maintenance techniques Ability to work effectively in a team environment Strong attention to detail and quality craftsmanship Flexibility to work shifts, including evenings and occasional nights NVQ Level 3 or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME, Plant, FMCG. Competitive salary Uplifted overtime rate
Jun 20, 2026
Full time
Job Title: Mechanical Fitter/Vehicle Builder - Contract OR Permanent Location: Milton Keynes Salary: Competitive + plus shift allowance Contract hourly rate: Competitive Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer About the Role: We are currently seeking experienced Mechanical Fitters to join a leading Engineering company based in Milton Keynes. In this role, you will have the opportunity to work on either the 150s or the West Repair Project, focusing on Rolling Stock. The position involves working shifts, including earlies (6am-2pm) or lates (2pm-10pm). For the West Repair Project, there may be occasional night shifts. Key Responsibilities: Conducting vehicle building tasks according to project requirements Performing repairs, maintenance, and inspections on trains Stripping and re-fitting of mechanical components Stripping and re-fitting of seats Stripping and re-fitting of hand rails & grab rails Stripping and re-fitting of underframe Adhering to safety protocols and quality standards Collaborating with team members to ensure efficient workflow Following shift schedules and meeting project deadlines Requirements: Previous experience as a Vehicle Builder or similar role Knowledge of vehicle assembly, repair, and maintenance techniques Ability to work effectively in a team environment Strong attention to detail and quality craftsmanship Flexibility to work shifts, including evenings and occasional nights NVQ Level 3 or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME, Plant, FMCG. Competitive salary Uplifted overtime rate
Electrical - Multi skilled shift engineer I'm helping a major FM service provider find a shift engineer on a large contract in central London. £52,000 - £54,000 + overtime (flexible with experience) Contintal days and nights Large, static site in East London Further training and progression Tasks: Planned Preventative Maintenance (PPM) Carry out scheduled maintenance of electrical and mechanical systems, including lighting, power distribution, and HVAC equipment. Ensure that all maintenance tasks are completed to high standards and in compliance with regulations. Fault Diagnosis and Repair Diagnose, troubleshoot, and repair electrical and mechanical faults on a variety of systems, including control panels, motors, pumps, and BMS. Respond promptly to breakdowns and emergencies, minimising downtime and ensuring equipment is back in service as quickly as possible. Electrical Installations and Upgrades Carry out electrical installations, modifications, and upgrades as required, adhering to relevant regulations and standards (BS7671). Qualifications: NVQ or City and Guilds Level 3 electrical installations 17th or 18th Edition Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 20, 2026
Full time
Electrical - Multi skilled shift engineer I'm helping a major FM service provider find a shift engineer on a large contract in central London. £52,000 - £54,000 + overtime (flexible with experience) Contintal days and nights Large, static site in East London Further training and progression Tasks: Planned Preventative Maintenance (PPM) Carry out scheduled maintenance of electrical and mechanical systems, including lighting, power distribution, and HVAC equipment. Ensure that all maintenance tasks are completed to high standards and in compliance with regulations. Fault Diagnosis and Repair Diagnose, troubleshoot, and repair electrical and mechanical faults on a variety of systems, including control panels, motors, pumps, and BMS. Respond promptly to breakdowns and emergencies, minimising downtime and ensuring equipment is back in service as quickly as possible. Electrical Installations and Upgrades Carry out electrical installations, modifications, and upgrades as required, adhering to relevant regulations and standards (BS7671). Qualifications: NVQ or City and Guilds Level 3 electrical installations 17th or 18th Edition Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
WHAT IS IN IT FOR YOU? Permanent role Gateshead or Tanfield location 3 Shift Pattern Rotating 7am-3pm, 3pm-11pm and 11pm-7am £33.7k pa (equating to £16.21 per hour including shift allowance - 40-hour week) Excellent overtime rates available 20 days holiday plus bank holidays and 1 gift holiday per year Company pension scheme Cycle To Work scheme Employee Assistance program Electric charging points on site Various staff events including charity events Employee saving scheme Greggs Friday Tyne & Wear location Easily accessible Supportive culture, inclusive environment and growing employer THE BUSINESS Westray Recruitment Group is seeking an experienced Thermoforming Setter to work on a permanent contract for our client based in Tyne & Wear. The role consists of working a 3-shift pattern 7am-3pm, 3pm-11pm & 11pm-7am. The organisation produces a variety of products including food packaging. They provide themselves on their ability to provide innovative designs built on sustainability. They are a growing employer and their reputation has been built on offering high quality products at cost effective pricing. As an experienced thermoforming setter, you will be responsible for setting up to 8 illig thermoforming lines. THE ROLE To act as a thermoforming setter and drive the efficient running of the thermoforming department working efficiently to the speed and quality required. To perform tool changes and change products as and when necessary To run the Thermoforming machines to correct standard including Quality and Speed To complete all relevant paperwork during every shift in a timely manner To perform Quality checks and weight checks as and when required To perform inspections of products throughout production to ensure they meet the required quality To check and prepare tooling to make ready to be installed into thermoforming machines Change tooling parts or blade changes as and when required Diagnose and correct running faults in a timely manner Keep the area tidy with CLEAN AS YOU GO and completes allocated cleaning tasks on a daily basis as outlined in the cleaning rota Effectively communicate progress and any issues that arise with the Shift Manager / Shift Supervisor. May be required to wrap pallets and move product pallets around site. To ensure all protective clothing provided is worn as per the guidance To work within company Health and Safety Rules To assist and adhere to BRC standards To carry out any other duties that are within the employee's skills and abilities whenever reasonably instructed. Contribute to team efforts by accomplishing related results as needed and maintain a professional attitude Adhere to all policies and procedures as set out within the employee handbook THE PERSON You must have a minimium of 2 years experience as a Thermoforming Setter in the plastics industry to be considered for this role Must be competent to run multiple machines Must be prepared to work shifts and contribute to overtime Must understand food hygiene Mechanical skills and very basic electrical skills TO APPLY Please send your updated CV to Harry Mann in our Engineering team or apply direct by calling Westray Recruitment Group.
Jun 19, 2026
Full time
WHAT IS IN IT FOR YOU? Permanent role Gateshead or Tanfield location 3 Shift Pattern Rotating 7am-3pm, 3pm-11pm and 11pm-7am £33.7k pa (equating to £16.21 per hour including shift allowance - 40-hour week) Excellent overtime rates available 20 days holiday plus bank holidays and 1 gift holiday per year Company pension scheme Cycle To Work scheme Employee Assistance program Electric charging points on site Various staff events including charity events Employee saving scheme Greggs Friday Tyne & Wear location Easily accessible Supportive culture, inclusive environment and growing employer THE BUSINESS Westray Recruitment Group is seeking an experienced Thermoforming Setter to work on a permanent contract for our client based in Tyne & Wear. The role consists of working a 3-shift pattern 7am-3pm, 3pm-11pm & 11pm-7am. The organisation produces a variety of products including food packaging. They provide themselves on their ability to provide innovative designs built on sustainability. They are a growing employer and their reputation has been built on offering high quality products at cost effective pricing. As an experienced thermoforming setter, you will be responsible for setting up to 8 illig thermoforming lines. THE ROLE To act as a thermoforming setter and drive the efficient running of the thermoforming department working efficiently to the speed and quality required. To perform tool changes and change products as and when necessary To run the Thermoforming machines to correct standard including Quality and Speed To complete all relevant paperwork during every shift in a timely manner To perform Quality checks and weight checks as and when required To perform inspections of products throughout production to ensure they meet the required quality To check and prepare tooling to make ready to be installed into thermoforming machines Change tooling parts or blade changes as and when required Diagnose and correct running faults in a timely manner Keep the area tidy with CLEAN AS YOU GO and completes allocated cleaning tasks on a daily basis as outlined in the cleaning rota Effectively communicate progress and any issues that arise with the Shift Manager / Shift Supervisor. May be required to wrap pallets and move product pallets around site. To ensure all protective clothing provided is worn as per the guidance To work within company Health and Safety Rules To assist and adhere to BRC standards To carry out any other duties that are within the employee's skills and abilities whenever reasonably instructed. Contribute to team efforts by accomplishing related results as needed and maintain a professional attitude Adhere to all policies and procedures as set out within the employee handbook THE PERSON You must have a minimium of 2 years experience as a Thermoforming Setter in the plastics industry to be considered for this role Must be competent to run multiple machines Must be prepared to work shifts and contribute to overtime Must understand food hygiene Mechanical skills and very basic electrical skills TO APPLY Please send your updated CV to Harry Mann in our Engineering team or apply direct by calling Westray Recruitment Group.
Mechanical Fitter Location: Crewe Salary: £47,147 per year (rising to £55,000+) Shift Pattern: 4 on / 4 off A fantastic opportunity has opened for a Level 3 qualified Mechanical Fitter with a background in heavy engineering to step into the rail industry and work on some of the most powerful machines on the network. Your New Opportunity Join a highly skilled engineering team responsible for keeping heavy diesel locomotives running safely and reliably. In this role, you will: Carry out mechanical maintenance , repair , and overhaul tasks on locomotives. Diagnose , investigate , and repair faults across mechanical , pneumatic , hydraulic , and basic electrical systems. Use written maintenance instructions (VMI) and engineering drawings to complete examinations, inspections, and routine servicing. Every shift offers variety, technical challenge, and the chance to work on impressive large-scale machinery. The Ideal Candidate You'll bring experience, precision, and a strong maintenance mindset. We're looking for someone with: Previous experience as a Mechanical Fitter in a heavy engineering environment. A background from sectors such as REME (ex-forces), HGV, bus/coach fleets, aviation, large machinery, or ideally locomotives/rolling stock. Confidence working rotating shifts, including earlies, lates, and nights. Essential Criteria Proven maintenance and fault-finding experience within transport or plant engineering. Level 3 qualification (or equivalent) in mechanical or electrical engineering. Full UK driving licence. Ability to pass a medical, drug & alcohol screening, and a DBS check. Progression & Earnings Your base salary starts at £47,147 per year , with clear and achievable routes to increase your earnings: Additional £1,000 per year for train driving and shunting duties. Up to 6 technical training modules , each worth £1,500 per annum , enabling total earnings of £55,000+ . Training includes shunter operations, axle & bearing engineering, electrical fault-finding, mentoring, and more. This is a brilliant chance to grow your career in a thriving sector with unmatched stability, development, and long-term prospects. Take the next step in your engineering journey - apply today and progress your career in the rail industry. Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom.1. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services - permanent and temporary.2. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract.3. Ford & Stanley Executive Search - Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe.4. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way.Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.Services advertised by Ford & Stanley are that of an employment consultancy business.
Jun 19, 2026
Full time
Mechanical Fitter Location: Crewe Salary: £47,147 per year (rising to £55,000+) Shift Pattern: 4 on / 4 off A fantastic opportunity has opened for a Level 3 qualified Mechanical Fitter with a background in heavy engineering to step into the rail industry and work on some of the most powerful machines on the network. Your New Opportunity Join a highly skilled engineering team responsible for keeping heavy diesel locomotives running safely and reliably. In this role, you will: Carry out mechanical maintenance , repair , and overhaul tasks on locomotives. Diagnose , investigate , and repair faults across mechanical , pneumatic , hydraulic , and basic electrical systems. Use written maintenance instructions (VMI) and engineering drawings to complete examinations, inspections, and routine servicing. Every shift offers variety, technical challenge, and the chance to work on impressive large-scale machinery. The Ideal Candidate You'll bring experience, precision, and a strong maintenance mindset. We're looking for someone with: Previous experience as a Mechanical Fitter in a heavy engineering environment. A background from sectors such as REME (ex-forces), HGV, bus/coach fleets, aviation, large machinery, or ideally locomotives/rolling stock. Confidence working rotating shifts, including earlies, lates, and nights. Essential Criteria Proven maintenance and fault-finding experience within transport or plant engineering. Level 3 qualification (or equivalent) in mechanical or electrical engineering. Full UK driving licence. Ability to pass a medical, drug & alcohol screening, and a DBS check. Progression & Earnings Your base salary starts at £47,147 per year , with clear and achievable routes to increase your earnings: Additional £1,000 per year for train driving and shunting duties. Up to 6 technical training modules , each worth £1,500 per annum , enabling total earnings of £55,000+ . Training includes shunter operations, axle & bearing engineering, electrical fault-finding, mentoring, and more. This is a brilliant chance to grow your career in a thriving sector with unmatched stability, development, and long-term prospects. Take the next step in your engineering journey - apply today and progress your career in the rail industry. Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom.1. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services - permanent and temporary.2. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract.3. Ford & Stanley Executive Search - Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe.4. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way.Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.Services advertised by Ford & Stanley are that of an employment consultancy business.
M+E Maintenance Engineer Permanent - Shift Pattern Hours: 6am - 2pm, 2pm - 12 Midnight currently - This will be changing the in near future to the following 6am - 2pm, 2pm - 10pm, 10pm to 6am Sheffield £45,000 - £48,000 + Package The M+E Maintenance Engineer Opportunity A recruitment partner is currently supporting a well-established engineering and manufacturing business in the search for an experienced M+E Maintenance Engineer to join their maintenance team. This position will play a key role in supporting day-to-day operational reliability across a fast-paced manufacturing environment. The successful candidate will be responsible for both electrical and mechanical maintenance activities, ensuring plant equipment, systems, and machinery are maintained to a high operational and compliance standard. The business operates within a precision engineering and heavy industrial environment, supplying specialist engineered products into demanding global markets. Key Responsibilities of the M+E Maintenance Engineer The successful M+E Maintenance engineer will be responsible for carrying out planned preventative maintenance as well as responding to reactive breakdowns across the facility. The role will involve diagnosing and repairing both electrical and mechanical faults in a safe and efficient manner, minimising downtime and supporting production continuity. You will assist with installation works and modifications to plant equipment where required, while ensuring all maintenance activities are completed in accordance with site safety procedures and compliance standards. Prior to carrying out tasks, suitable risk assessments and safe systems of work must always be followed. The role will also involve working with site electrical and control systems, supporting continuous improvement initiatives, and maintaining accurate maintenance records using internal systems and software. You will regularly liaise with production teams, supervisors, and external contractors to coordinate maintenance activities and ensure work is completed effectively and safely. Requirements from the M+E Maintenance Engineer Applicants should hold a recognised apprenticeship within either electrical or mechanical maintenance engineering and have previous experience working within a manufacturing, industrial, or heavy engineering environment. Candidates should have strong fault-finding abilities across mechanical and electrical systems, with exposure to PLCs, plant controls, and automated systems considered highly advantageous. The ideal candidate will be self-motivated, safety conscious, and capable of working independently or as part of a wider engineering team. Strong communication skills and basic computer literacy are also important for the role. What s on Offer for the M+E Maintenance Engineer This opportunity offers the chance to join a stable and growing engineering business with a strong reputation within its sector. The company can provide long-term career development, exposure to complex engineering systems, and the opportunity to work within a highly skilled maintenance environment.
Jun 19, 2026
Full time
M+E Maintenance Engineer Permanent - Shift Pattern Hours: 6am - 2pm, 2pm - 12 Midnight currently - This will be changing the in near future to the following 6am - 2pm, 2pm - 10pm, 10pm to 6am Sheffield £45,000 - £48,000 + Package The M+E Maintenance Engineer Opportunity A recruitment partner is currently supporting a well-established engineering and manufacturing business in the search for an experienced M+E Maintenance Engineer to join their maintenance team. This position will play a key role in supporting day-to-day operational reliability across a fast-paced manufacturing environment. The successful candidate will be responsible for both electrical and mechanical maintenance activities, ensuring plant equipment, systems, and machinery are maintained to a high operational and compliance standard. The business operates within a precision engineering and heavy industrial environment, supplying specialist engineered products into demanding global markets. Key Responsibilities of the M+E Maintenance Engineer The successful M+E Maintenance engineer will be responsible for carrying out planned preventative maintenance as well as responding to reactive breakdowns across the facility. The role will involve diagnosing and repairing both electrical and mechanical faults in a safe and efficient manner, minimising downtime and supporting production continuity. You will assist with installation works and modifications to plant equipment where required, while ensuring all maintenance activities are completed in accordance with site safety procedures and compliance standards. Prior to carrying out tasks, suitable risk assessments and safe systems of work must always be followed. The role will also involve working with site electrical and control systems, supporting continuous improvement initiatives, and maintaining accurate maintenance records using internal systems and software. You will regularly liaise with production teams, supervisors, and external contractors to coordinate maintenance activities and ensure work is completed effectively and safely. Requirements from the M+E Maintenance Engineer Applicants should hold a recognised apprenticeship within either electrical or mechanical maintenance engineering and have previous experience working within a manufacturing, industrial, or heavy engineering environment. Candidates should have strong fault-finding abilities across mechanical and electrical systems, with exposure to PLCs, plant controls, and automated systems considered highly advantageous. The ideal candidate will be self-motivated, safety conscious, and capable of working independently or as part of a wider engineering team. Strong communication skills and basic computer literacy are also important for the role. What s on Offer for the M+E Maintenance Engineer This opportunity offers the chance to join a stable and growing engineering business with a strong reputation within its sector. The company can provide long-term career development, exposure to complex engineering systems, and the opportunity to work within a highly skilled maintenance environment.
