We are currently looking for good Groundwork Civils gangs to start work for an important Civils client of ours based in the Birmingham City Centre area. ideally we are looking for a gang of Groundworkers consisting of the following: CPCS or NPORS Dumper / Roller driver CPCS A73 Plant & Vehicle Marshall Confined Space Someone must have A Ganger - (Someone who looks after this gang) Slinger / Banksman First Aid - Desirable EUSR Permit Acceptor (HSG47 Cat 1 and 2, in cable avoidance Manual Handling / Small Tool / Abrasive Wheels - Desirable The gang will be expected to be able to do general civils groundworks including, shallow drainage, ducting, kerb laying, concreting and hand digging etc. Ideal candidates must have good previous groundwork/civils experience working in a gang. Can any candidates interested in applying please contact Steve by email?
Jun 16, 2026
Seasonal
We are currently looking for good Groundwork Civils gangs to start work for an important Civils client of ours based in the Birmingham City Centre area. ideally we are looking for a gang of Groundworkers consisting of the following: CPCS or NPORS Dumper / Roller driver CPCS A73 Plant & Vehicle Marshall Confined Space Someone must have A Ganger - (Someone who looks after this gang) Slinger / Banksman First Aid - Desirable EUSR Permit Acceptor (HSG47 Cat 1 and 2, in cable avoidance Manual Handling / Small Tool / Abrasive Wheels - Desirable The gang will be expected to be able to do general civils groundworks including, shallow drainage, ducting, kerb laying, concreting and hand digging etc. Ideal candidates must have good previous groundwork/civils experience working in a gang. Can any candidates interested in applying please contact Steve by email?
Mechanical Fitter Job Type: Full Time, Permanent Location: Shipdham, Norfolk Working Hours: Monday to Friday 7:30am to 4.00pm, with a 30-minute unpaid lunch break. The position offers a minimum of 40 basic paid hours per week, with overtime required as necessary. Overtime will be paid at 1.5 times the standard hourly rate. Salary: £16.00 per hour to £18.00 per hour, depending on experience. Benefits: Pension Scheme Death in Service Enhanced annual leave based on service (first increase of one day after 2 years) Within the Falcon Group is Falcon Tower Crane Services, the largest tower crane supplier in the UK and one of the largest in the world with just under 450 tower cranes nationwide. Falcon Power Generation with 400 generators nationwide along with Falcon Freight who operate a fleet of 37 HGV vehicles with a selection of units supporting artic and rigid HIAB cranes. We are looking for a full-time Mechanical Fitter to be based at our Shipdham, Norfolk depot. Comprehensive training, continued professional development, and ongoing support will be provided to help you excel in the role. The Role: Working collaboratively within the Mechanical Department at our Shipdham Depot, you will support the maintenance, servicing, and repair of the Company s fleet of tower cranes, gantry cranes, and associated plant equipment. This will include, but is not limited to, carrying out planned servicing and preventative maintenance, diagnosing and repairing mechanical, hydraulic, and electrical faults, and replacing worn or damaged components to ensure equipment remains safe and operational. You will also be responsible for completing inspections, safety checks, and accurate maintenance records, sourcing replacement parts where required, and responding to equipment breakdowns to minimise operational downtime. The role will involve working at height in line with Company procedures, using approved safety equipment at all times. You will ensure all work is completed safely and efficiently, following Company policies, procedures, risk assessments, and relevant health & safety requirements. What We re Looking For: Essential Experience & Qualifications: NVQ Level 2 Plant Maintenance NVQ Level 2 Engineering Experience in mechanical maintenance, fault finding, and repairs Ability to diagnose and resolve mechanical, hydraulic, and electrical faults Ability to work independently and as part of a team Good problem-solving skills and a practical hands-on approach Ability to follow procedures and complete work safely and efficiently Good communication skills and ability to work effectively with colleagues and external stakeholders High attention to detail and accuracy Commitment to health and safety and following company procedures Desirable Qualifications & Experience: Industrial electrical knowledge Industrial Forklift experience Slinger/signaller qualification or experience Experience working with cranes, plant machinery, or heavy equipment Key Skills & Personal Attributes: Able to communicate clearly and effectively. Able to work independently and as part of a team with a highly supportive and collaborative approach. Excellent time management skills to ensure the workload is carried out effectively. Excellent attention to detail and the ability to work under pressure. Commitment to safety and following company procedures Positive attitude, good timekeeping, and a desire to learn and develop Strong problem-solving abilities and a hands-on approach to tasks. Strong work ethic and a can-do attitude. The ability to perform the job responsibilities safely and effectively, without endangering your own health or the health of others. Be prepared to work outside in all weather conditions, for which suitable PPE will be provided. Promote and display a positive Safety Culture. Due to our rural location, it is essential that the successful candidate has a full driving licence and their own transport.
Jun 15, 2026
Full time
Mechanical Fitter Job Type: Full Time, Permanent Location: Shipdham, Norfolk Working Hours: Monday to Friday 7:30am to 4.00pm, with a 30-minute unpaid lunch break. The position offers a minimum of 40 basic paid hours per week, with overtime required as necessary. Overtime will be paid at 1.5 times the standard hourly rate. Salary: £16.00 per hour to £18.00 per hour, depending on experience. Benefits: Pension Scheme Death in Service Enhanced annual leave based on service (first increase of one day after 2 years) Within the Falcon Group is Falcon Tower Crane Services, the largest tower crane supplier in the UK and one of the largest in the world with just under 450 tower cranes nationwide. Falcon Power Generation with 400 generators nationwide along with Falcon Freight who operate a fleet of 37 HGV vehicles with a selection of units supporting artic and rigid HIAB cranes. We are looking for a full-time Mechanical Fitter to be based at our Shipdham, Norfolk depot. Comprehensive training, continued professional development, and ongoing support will be provided to help you excel in the role. The Role: Working collaboratively within the Mechanical Department at our Shipdham Depot, you will support the maintenance, servicing, and repair of the Company s fleet of tower cranes, gantry cranes, and associated plant equipment. This will include, but is not limited to, carrying out planned servicing and preventative maintenance, diagnosing and repairing mechanical, hydraulic, and electrical faults, and replacing worn or damaged components to ensure equipment remains safe and operational. You will also be responsible for completing inspections, safety checks, and accurate maintenance records, sourcing replacement parts where required, and responding to equipment breakdowns to minimise operational downtime. The role will involve working at height in line with Company procedures, using approved safety equipment at all times. You will ensure all work is completed safely and efficiently, following Company policies, procedures, risk assessments, and relevant health & safety requirements. What We re Looking For: Essential Experience & Qualifications: NVQ Level 2 Plant Maintenance NVQ Level 2 Engineering Experience in mechanical maintenance, fault finding, and repairs Ability to diagnose and resolve mechanical, hydraulic, and electrical faults Ability to work independently and as part of a team Good problem-solving skills and a practical hands-on approach Ability to follow procedures and complete work safely and efficiently Good communication skills and ability to work effectively with colleagues and external stakeholders High attention to detail and accuracy Commitment to health and safety and following company procedures Desirable Qualifications & Experience: Industrial electrical knowledge Industrial Forklift experience Slinger/signaller qualification or experience Experience working with cranes, plant machinery, or heavy equipment Key Skills & Personal Attributes: Able to communicate clearly and effectively. Able to work independently and as part of a team with a highly supportive and collaborative approach. Excellent time management skills to ensure the workload is carried out effectively. Excellent attention to detail and the ability to work under pressure. Commitment to safety and following company procedures Positive attitude, good timekeeping, and a desire to learn and develop Strong problem-solving abilities and a hands-on approach to tasks. Strong work ethic and a can-do attitude. The ability to perform the job responsibilities safely and effectively, without endangering your own health or the health of others. Be prepared to work outside in all weather conditions, for which suitable PPE will be provided. Promote and display a positive Safety Culture. Due to our rural location, it is essential that the successful candidate has a full driving licence and their own transport.
CPCS Lifting Supervisor - Bournemouth 30.00 per hour 8 Hours Paid Per Day 1 Month Contract Tech-People are currently recruiting for an experienced CPCS Lifting Supervisor for a project in Bournemouth, starting on 22nd June 2026. This is a fantastic opportunity for a reliable and competent Lifting Supervisor to join a busy site on a temporary contract lasting approximately one month. Duties will include: Supervising all lifting operations on site Ensuring lifts are carried out safely and in accordance with approved lift plans and method statements Coordinating crane operations, slingers, signallers, and other personnel involved in lifting activities Conducting briefings and ensuring all lifting activities comply with current health and safety regulations Liaising with site management and crane operators to ensure smooth site operations Requirements: Valid CPCS Lifting Supervisor (A62) card Proven experience working as a Lifting Supervisor on construction sites Strong understanding of lifting operations, lift plans, and site safety procedures Excellent communication and organisational skills Ability to work independently and manage lifting activities effectively What's on Offer: 30.00 per hour 8 hours work per day Approximately 1 month of work Parking available on site Immediate start available from 22/06/2026 If you are an experienced CPCS Lifting Supervisor and are available for this project, please apply with your CV or contact Gosia on (phone number removed) for more information. Tech-People are a leading recruitment business within M&E and Construction. We are committed to attracting and providing a diverse workforce reflective of the communities we serve, and supporting an inclusive working environment for all.
Jun 14, 2026
Seasonal
CPCS Lifting Supervisor - Bournemouth 30.00 per hour 8 Hours Paid Per Day 1 Month Contract Tech-People are currently recruiting for an experienced CPCS Lifting Supervisor for a project in Bournemouth, starting on 22nd June 2026. This is a fantastic opportunity for a reliable and competent Lifting Supervisor to join a busy site on a temporary contract lasting approximately one month. Duties will include: Supervising all lifting operations on site Ensuring lifts are carried out safely and in accordance with approved lift plans and method statements Coordinating crane operations, slingers, signallers, and other personnel involved in lifting activities Conducting briefings and ensuring all lifting activities comply with current health and safety regulations Liaising with site management and crane operators to ensure smooth site operations Requirements: Valid CPCS Lifting Supervisor (A62) card Proven experience working as a Lifting Supervisor on construction sites Strong understanding of lifting operations, lift plans, and site safety procedures Excellent communication and organisational skills Ability to work independently and manage lifting activities effectively What's on Offer: 30.00 per hour 8 hours work per day Approximately 1 month of work Parking available on site Immediate start available from 22/06/2026 If you are an experienced CPCS Lifting Supervisor and are available for this project, please apply with your CV or contact Gosia on (phone number removed) for more information. Tech-People are a leading recruitment business within M&E and Construction. We are committed to attracting and providing a diverse workforce reflective of the communities we serve, and supporting an inclusive working environment for all.
Banksmen Slinger We are currently looking for casual personnel to support our Aberdeen Quayside operation Qualification minimum OPITO Banksman/Slinger Initial Certificate Willing to work as part of a Team Be available at short notice Live local to Aberdeen Comfortable with nightshift and weekend working If this is you, please call Aberdeen (phone number removed) or (phone number removed) for an informal chat, previous experience within a Cargo Operations/Quayside role would be advantageous.
Jun 13, 2026
Seasonal
Banksmen Slinger We are currently looking for casual personnel to support our Aberdeen Quayside operation Qualification minimum OPITO Banksman/Slinger Initial Certificate Willing to work as part of a Team Be available at short notice Live local to Aberdeen Comfortable with nightshift and weekend working If this is you, please call Aberdeen (phone number removed) or (phone number removed) for an informal chat, previous experience within a Cargo Operations/Quayside role would be advantageous.
Our client is a well-established specialist in architectural metalwork and steel fabrication, delivering high-quality projects across the UK. Due to continued growth, they are seeking an experienced Skilled Site Fitter & Fabricator to join their installation team. This is an excellent opportunity for a motivated individual with experience in secondary steelwork, architectural staircases, balustrades, handrails, and glass installations to work on a variety of exciting projects nationwide. As a Skilled Site Fitter & Fabricator, you will be responsible for carrying out onsite installation and fabrication work while ensuring projects are completed safely, efficiently, and to the highest quality standards. Key responsibilities include: Installing and fabricating architectural metalwork including staircases, balustrades, handrails, and glass panels. Reading and interpreting technical drawings, site packs, RAMS, and installation instructions. Supervising and supporting semi-skilled fitters on site. Ensuring all work is completed in line with project deadlines and quality requirements. Maintaining accurate site records, timesheets, and daily progress reports. Identifying and resolving onsite issues while communicating effectively with management. Adhering to all Health & Safety procedures and promoting safe working practices. The successful candidate will have: Proven experience in site fitting and fabrication within the steelwork or architectural metalwork industry. Strong knowledge of installing staircases, balustrades, handrails, and secondary steelwork. Ability to read and interpret fabrication and installation drawings. Excellent problem-solving and organisational skills. A proactive and self-motivated approach to work. Full UK Driving Licence. Desirable Qualifications CSCS Card IPAF PASMA Telehandler FLT Licence Harness Training Slinger/Signaller (Banksman) What's on Offer? Paying upto £20.00 per hours DOE Overtime available Long-term career development with a growing business. Diverse and interesting projects across the UK. Supportive team environment. Ongoing training and development opportunities. If you have the skills, experience, and commitment to deliver high-quality workmanship and want to be part of a successful and expanding business, we'd love to hear from you. This vacancy is advertised on behalf of Talent-UK Ltd who are operating as an employment agency/business, we are an equal opportunities employer, your application will be sent to us for review, at which stage we will be in touch to discuss your details further. We will not submit your CV until you have been briefed on the position and we have your consent to do so.
Jun 12, 2026
Full time
Our client is a well-established specialist in architectural metalwork and steel fabrication, delivering high-quality projects across the UK. Due to continued growth, they are seeking an experienced Skilled Site Fitter & Fabricator to join their installation team. This is an excellent opportunity for a motivated individual with experience in secondary steelwork, architectural staircases, balustrades, handrails, and glass installations to work on a variety of exciting projects nationwide. As a Skilled Site Fitter & Fabricator, you will be responsible for carrying out onsite installation and fabrication work while ensuring projects are completed safely, efficiently, and to the highest quality standards. Key responsibilities include: Installing and fabricating architectural metalwork including staircases, balustrades, handrails, and glass panels. Reading and interpreting technical drawings, site packs, RAMS, and installation instructions. Supervising and supporting semi-skilled fitters on site. Ensuring all work is completed in line with project deadlines and quality requirements. Maintaining accurate site records, timesheets, and daily progress reports. Identifying and resolving onsite issues while communicating effectively with management. Adhering to all Health & Safety procedures and promoting safe working practices. The successful candidate will have: Proven experience in site fitting and fabrication within the steelwork or architectural metalwork industry. Strong knowledge of installing staircases, balustrades, handrails, and secondary steelwork. Ability to read and interpret fabrication and installation drawings. Excellent problem-solving and organisational skills. A proactive and self-motivated approach to work. Full UK Driving Licence. Desirable Qualifications CSCS Card IPAF PASMA Telehandler FLT Licence Harness Training Slinger/Signaller (Banksman) What's on Offer? Paying upto £20.00 per hours DOE Overtime available Long-term career development with a growing business. Diverse and interesting projects across the UK. Supportive team environment. Ongoing training and development opportunities. If you have the skills, experience, and commitment to deliver high-quality workmanship and want to be part of a successful and expanding business, we'd love to hear from you. This vacancy is advertised on behalf of Talent-UK Ltd who are operating as an employment agency/business, we are an equal opportunities employer, your application will be sent to us for review, at which stage we will be in touch to discuss your details further. We will not submit your CV until you have been briefed on the position and we have your consent to do so.
Experience CPCS/ NPORS Slinger Banksman required in Fenham Newcastle for its 1 weeks work for a slipform project must have experience in Rc frame concrete works, if availble for next week Monday 15th let me know , parking available on site
Jun 12, 2026
Seasonal
Experience CPCS/ NPORS Slinger Banksman required in Fenham Newcastle for its 1 weeks work for a slipform project must have experience in Rc frame concrete works, if availble for next week Monday 15th let me know , parking available on site
Appointed Person (Lifting Operations) / Lift Planner Salary £35 £40k + benefits and career opportunities Location: King's Lynn with regional travel We have an exciting opportunity for an Appointed Person / Lift Planner to work for an industry We have an exciting opportunity for an Appointed Person / Lift Planner to work for an industry leading provider of modular buildings and site accommodation solutions. This role offers a clear pathway into Project Management, making it an excellent opportunity for someone looking to progress their career within a growing organisation. The main purpose of the role is to plan and coordinate lifting operations, produce site-specific documentation, and act as the key technical link between customers and internal teams to ensure safe and efficient delivery and installation of projects. Key Responsibilities Carry out site surveys and produce site-specific lifting plans, method statements and risk assessments Act as the key technical point of contact between customers, operations and internal teams Coordinate delivery and installation activities to ensure projects run efficiently Provide technical advice and guidance on lifting operations and installation requirements Ensure all lifting operations comply with relevant legislation and safety standards Support factory and operational teams to ensure customer requirements are met Monitor installation activities and provide ongoing support to ensure safe working practices Develop strong working relationships with customers, suppliers and colleagues About You Must have experience working in a similar role such as Appointed Person, Lift Planner, Crane Supervisor or Site Inspector. Experience producing lifting plans, method statements and risk assessments, and a strong understanding of lifting operations and site-based activities. Appointed Person (Lifting Operations) qualification. The following would also be advantageous but are not essential: Slinger/Signaller, IPAF, PASMA or SSSTS. You should be organised, detail-focused and confident managing multiple projects, with the ability to communicate effectively across customers and internal teams. If you feel you can meet the challenges of this role then please apply by attaching your CV. Smartsearch take your privacy seriously and will only use your personal information to administer your application. To effectively process your application, we may share your details with the company for whom we are collecting job applications and Smartsearch or the company may contact you by email, telephone or SMS. A copy of our privacy policy will be emailed to you upon receipt of your application.
Jun 12, 2026
Full time
Appointed Person (Lifting Operations) / Lift Planner Salary £35 £40k + benefits and career opportunities Location: King's Lynn with regional travel We have an exciting opportunity for an Appointed Person / Lift Planner to work for an industry We have an exciting opportunity for an Appointed Person / Lift Planner to work for an industry leading provider of modular buildings and site accommodation solutions. This role offers a clear pathway into Project Management, making it an excellent opportunity for someone looking to progress their career within a growing organisation. The main purpose of the role is to plan and coordinate lifting operations, produce site-specific documentation, and act as the key technical link between customers and internal teams to ensure safe and efficient delivery and installation of projects. Key Responsibilities Carry out site surveys and produce site-specific lifting plans, method statements and risk assessments Act as the key technical point of contact between customers, operations and internal teams Coordinate delivery and installation activities to ensure projects run efficiently Provide technical advice and guidance on lifting operations and installation requirements Ensure all lifting operations comply with relevant legislation and safety standards Support factory and operational teams to ensure customer requirements are met Monitor installation activities and provide ongoing support to ensure safe working practices Develop strong working relationships with customers, suppliers and colleagues About You Must have experience working in a similar role such as Appointed Person, Lift Planner, Crane Supervisor or Site Inspector. Experience producing lifting plans, method statements and risk assessments, and a strong understanding of lifting operations and site-based activities. Appointed Person (Lifting Operations) qualification. The following would also be advantageous but are not essential: Slinger/Signaller, IPAF, PASMA or SSSTS. You should be organised, detail-focused and confident managing multiple projects, with the ability to communicate effectively across customers and internal teams. If you feel you can meet the challenges of this role then please apply by attaching your CV. Smartsearch take your privacy seriously and will only use your personal information to administer your application. To effectively process your application, we may share your details with the company for whom we are collecting job applications and Smartsearch or the company may contact you by email, telephone or SMS. A copy of our privacy policy will be emailed to you upon receipt of your application.
We currently have vacancy for a Base Operative to support operations at our Heysham facility. Duties will include but not limited to loading and discharging trailers and containers, lifting operations, checking materials and maintaining yard and warehouse cleanliness. Applicants will have experience of operating a forklift up to 12 tonne and working in a similar role. An OPITO approved Banksman/Slinger certificate is also highly desirable, but not essential as training will be provided. The successful candidate will have a focus on delivering good customer service as well as a commitment to health and safety. Communication skills are also important in this safety critical role. SAP and stock checking experience is desirable but not essential The successful candidate will also be required to support the duty call out rota (1 week out of 3). Our Company From our roots in agricultural inspections, Peterson and Control Union have been operating for nearly 100 years in the field of logistics, quality, certifications and risk management. Our in-depth knowledge and experience covers all aspects of the supply chain in many industries including agriculture, energy, forestry, sustainability and textiles.
Jun 11, 2026
Full time
We currently have vacancy for a Base Operative to support operations at our Heysham facility. Duties will include but not limited to loading and discharging trailers and containers, lifting operations, checking materials and maintaining yard and warehouse cleanliness. Applicants will have experience of operating a forklift up to 12 tonne and working in a similar role. An OPITO approved Banksman/Slinger certificate is also highly desirable, but not essential as training will be provided. The successful candidate will have a focus on delivering good customer service as well as a commitment to health and safety. Communication skills are also important in this safety critical role. SAP and stock checking experience is desirable but not essential The successful candidate will also be required to support the duty call out rota (1 week out of 3). Our Company From our roots in agricultural inspections, Peterson and Control Union have been operating for nearly 100 years in the field of logistics, quality, certifications and risk management. Our in-depth knowledge and experience covers all aspects of the supply chain in many industries including agriculture, energy, forestry, sustainability and textiles.
Slinger Signalller St Andrews offers an immediate start for a Slinger Signaller. Safely sling and attach loads for crane lifting operations Direct crane movements using approved hand and radio signals Ensure lifting activities are carried out in accordance with site safety procedures Carry out pre-lift checks and inspect lifting accessories before use Communicate effectively with crane operators, site supervisors, and ground teams Maintain safe exclusion zones and monitor lifting operations at all times We're Looking For Valid CPCS or NPORS Slinger Signaller qualification Previous experience working as a Slinger Signaller on construction sites Strong understanding of lifting operations and site safety requirements Excellent communication skills and attention to detail Reliable, punctual, and able to work effectively as part of a team Ability to follow lifting plans and site instructions accurately Salary: 18.00 to 24.00 per hour, depending on experience Location: Onsite role Job Type: Full-time Call to Action If interested in the poison above, please send your CV to (url removed) or alternatively (phone number removed). Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Jun 11, 2026
Seasonal
Slinger Signalller St Andrews offers an immediate start for a Slinger Signaller. Safely sling and attach loads for crane lifting operations Direct crane movements using approved hand and radio signals Ensure lifting activities are carried out in accordance with site safety procedures Carry out pre-lift checks and inspect lifting accessories before use Communicate effectively with crane operators, site supervisors, and ground teams Maintain safe exclusion zones and monitor lifting operations at all times We're Looking For Valid CPCS or NPORS Slinger Signaller qualification Previous experience working as a Slinger Signaller on construction sites Strong understanding of lifting operations and site safety requirements Excellent communication skills and attention to detail Reliable, punctual, and able to work effectively as part of a team Ability to follow lifting plans and site instructions accurately Salary: 18.00 to 24.00 per hour, depending on experience Location: Onsite role Job Type: Full-time Call to Action If interested in the poison above, please send your CV to (url removed) or alternatively (phone number removed). Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Lifting Supervisor /Slinger Signaller required to work on a civil engineering project in Christchurch, Dorset from Monday 15th June 2026 Applicants must hold a Blue CPCS Card with experience and be able to provide checkable references. Pay Rate: 25.00 per hour Working hours 07:30am - 18:00pm Duties will include unloading wagons with deliveries of materials, Slinging materials for trades on site with the Tower Crane, carrying out all lifts as per the site lifting plan, directing the Tower Crane Operator, completing daily paper work and all other associated duties as and when required. For more information please call Kasia at FBR Recruitment (phone number removed)
Jun 11, 2026
Contractor
Lifting Supervisor /Slinger Signaller required to work on a civil engineering project in Christchurch, Dorset from Monday 15th June 2026 Applicants must hold a Blue CPCS Card with experience and be able to provide checkable references. Pay Rate: 25.00 per hour Working hours 07:30am - 18:00pm Duties will include unloading wagons with deliveries of materials, Slinging materials for trades on site with the Tower Crane, carrying out all lifts as per the site lifting plan, directing the Tower Crane Operator, completing daily paper work and all other associated duties as and when required. For more information please call Kasia at FBR Recruitment (phone number removed)
Established for over 30 years, Wright engineering are looking to recruit enthusiastic and experienced Platers / Steel Erectors / Fitters / Pipe Fitters to join our team servicing sites across the UK. This is the perfect opportunity for an enthusiastic and dynamic person to thrive, working within a successful and vibrant team. Overview: - Working on sites across the UK on new-build, maintenance, and overhaul work. - Wide variety of work ranging for power stations, waste recovery, building product manufacture and quarrying. - Promotion opportunities available. Compensation and Benefits: - Competitive salary starting at £18.47/hour + £15 per night working away allowance + £25 per day sustenance allowance - Standard overtime rate of £27.70/hour and £39.48/hour on Sundays - Comprehensive pension plan and additional benefits. - 25 days holiday allowance plus statutory holidays. - Loyalty bonus scheme rewarding long-term commitment. Schedule: - Monday to Friday. - Overtime. - Weekend availability. The skills required are: - Experience of working on medium to heavy engineering. - Reading engineering GAs and detailed drawings. - Installing and maintaining a wide range of equipment such as conveyors, ash handling equipment. - On site fabrication and modifications. - Installation of new equipment and repairs to old. - Working to the highest of safety standards. - Plant operations such as MEWP, Loadall, Slinger banksman and PASMA would be benefit but training can be given. - NVQ training in the relevant trade.
Jun 11, 2026
Full time
Established for over 30 years, Wright engineering are looking to recruit enthusiastic and experienced Platers / Steel Erectors / Fitters / Pipe Fitters to join our team servicing sites across the UK. This is the perfect opportunity for an enthusiastic and dynamic person to thrive, working within a successful and vibrant team. Overview: - Working on sites across the UK on new-build, maintenance, and overhaul work. - Wide variety of work ranging for power stations, waste recovery, building product manufacture and quarrying. - Promotion opportunities available. Compensation and Benefits: - Competitive salary starting at £18.47/hour + £15 per night working away allowance + £25 per day sustenance allowance - Standard overtime rate of £27.70/hour and £39.48/hour on Sundays - Comprehensive pension plan and additional benefits. - 25 days holiday allowance plus statutory holidays. - Loyalty bonus scheme rewarding long-term commitment. Schedule: - Monday to Friday. - Overtime. - Weekend availability. The skills required are: - Experience of working on medium to heavy engineering. - Reading engineering GAs and detailed drawings. - Installing and maintaining a wide range of equipment such as conveyors, ash handling equipment. - On site fabrication and modifications. - Installation of new equipment and repairs to old. - Working to the highest of safety standards. - Plant operations such as MEWP, Loadall, Slinger banksman and PASMA would be benefit but training can be given. - NVQ training in the relevant trade.
Piling Recruitment Group Ltd
Port Talbot, West Glamorgan
Job Title: Slinger Signallers (Crane Banking Duties) Location: Port Talbot Start Date: July 2026 Duration: Until December 2026 Rates: Excellent rates available CIS or PAYE We are currently recruiting for experienced Slinger Signallers to work on a major construction project based in Port Talbot, commencing July 2026 and running through to December 2026. This role will involve all aspects of slinging and signalling duties, with a strong focus on crane banking operations, supporting safe lifting activities across a busy site. Key Responsibilities: Carrying out all slinger/signaller duties on site Banking cranes safely and effectively during lifting operations Attaching and detaching loads in line with lift plans Directing crane and lifting operations using approved hand signals and radios Ensuring exclusion zones are maintained at all times Working closely with crane operators, supervisors, and lifting teams Adhering strictly to site lifting plans, RAMS, and health & safety procedures Requirements: Valid CPCS Slinger Signaller ticket (All Duties) Proven experience working as a Slinger Signaller on construction sites Strong understanding of lifting operations and crane safety Excellent communication and situational awareness Ability to work as part of a busy site lifting team Must be able to commit to the full contract duration (July December 2026) Safety Critical Medical required (can be arranged if not currently held) What We Offer: Excellent rates of pay (CIS or PAYE options available) Long-term, stable work on a major infrastructure project Strong, well-managed lifting team environment Support with Safety Critical Medical if required If you are an experienced Slinger Signaller available for long-term work in Port Talbot, we want to hear from you. To apply, please submit your CV or apply online for more information.
Jun 11, 2026
Contractor
Job Title: Slinger Signallers (Crane Banking Duties) Location: Port Talbot Start Date: July 2026 Duration: Until December 2026 Rates: Excellent rates available CIS or PAYE We are currently recruiting for experienced Slinger Signallers to work on a major construction project based in Port Talbot, commencing July 2026 and running through to December 2026. This role will involve all aspects of slinging and signalling duties, with a strong focus on crane banking operations, supporting safe lifting activities across a busy site. Key Responsibilities: Carrying out all slinger/signaller duties on site Banking cranes safely and effectively during lifting operations Attaching and detaching loads in line with lift plans Directing crane and lifting operations using approved hand signals and radios Ensuring exclusion zones are maintained at all times Working closely with crane operators, supervisors, and lifting teams Adhering strictly to site lifting plans, RAMS, and health & safety procedures Requirements: Valid CPCS Slinger Signaller ticket (All Duties) Proven experience working as a Slinger Signaller on construction sites Strong understanding of lifting operations and crane safety Excellent communication and situational awareness Ability to work as part of a busy site lifting team Must be able to commit to the full contract duration (July December 2026) Safety Critical Medical required (can be arranged if not currently held) What We Offer: Excellent rates of pay (CIS or PAYE options available) Long-term, stable work on a major infrastructure project Strong, well-managed lifting team environment Support with Safety Critical Medical if required If you are an experienced Slinger Signaller available for long-term work in Port Talbot, we want to hear from you. To apply, please submit your CV or apply online for more information.
Wright Engineering are currently recruiting for Slinger/Signallers with immediate starts to join there dynamic team working away on a blue book site! About Wright Engineering: - A trailblazer with over 30 years in the industry. - A commitment to employee satisfaction and high staff retention. - Diverse projects across the UK, offering a stimulating work environment. Requirements: CCNSG Safety Passport CPCS Slinger/Signaller Ticket Banksman Ticket What We Offer: Blue Book PAYE rates Ongoing work Weekly pay Immediate starts available To apply, send your CV along with copies of your valid tickets.
Jun 10, 2026
Full time
Wright Engineering are currently recruiting for Slinger/Signallers with immediate starts to join there dynamic team working away on a blue book site! About Wright Engineering: - A trailblazer with over 30 years in the industry. - A commitment to employee satisfaction and high staff retention. - Diverse projects across the UK, offering a stimulating work environment. Requirements: CCNSG Safety Passport CPCS Slinger/Signaller Ticket Banksman Ticket What We Offer: Blue Book PAYE rates Ongoing work Weekly pay Immediate starts available To apply, send your CV along with copies of your valid tickets.
PSI Global Specialist Recruitment
Longbridge, Warwickshire
Our Major Projects team are recruiting 1x Groundworker with Slinger Ticket for work near Coventry starting Monday 15th June . Please note that due to the site location, you must have your own transport . Site is inaccessible via public transport. Job Details Location: Rugby (CV34) Start: Monday 15/6/26 Duration: 4 Weeks Hours: 07:30-17:00 (9hrs paid) per day (Mon-Fri) Rates: £22ph (CIS) Duties: Working on a Severn Trent Water project. Essential requirements CSCS Card Slinger Ticket Own Transport Checkable work references
Jun 10, 2026
Contractor
Our Major Projects team are recruiting 1x Groundworker with Slinger Ticket for work near Coventry starting Monday 15th June . Please note that due to the site location, you must have your own transport . Site is inaccessible via public transport. Job Details Location: Rugby (CV34) Start: Monday 15/6/26 Duration: 4 Weeks Hours: 07:30-17:00 (9hrs paid) per day (Mon-Fri) Rates: £22ph (CIS) Duties: Working on a Severn Trent Water project. Essential requirements CSCS Card Slinger Ticket Own Transport Checkable work references
Job Title: Civil Operatives (Groundworkers) - National Grid Substation Project Location: Long Lane, Whiston, Rotherham (GGP Project) Start Date: 22nd June 2026 Duration: Until 28th August 2026 Hours: 45 Hours per Week Rate: 27.00 per hour Positions Available: 2 Contract Type: Temporary We are currently recruiting for 2 experienced Civil Operatives/Groundworkers to join a major National Grid substation project in Rotherham on behalf of a leading energy infrastructure contractor. This is an excellent opportunity for operatives with previous substation experience who are competent in excavation, ducting, drainage, and associated civil works within a high-voltage environment. Duties will include: Surface water, foul water, and oily water drainage installations HV & LV ducting works and draw pit installations Installation of HV & LV precast troughs Excavation works and safe digging practices Blinding and concrete placement to foundations Reinstatement of excavations, including backfilling and compaction Hand digging and service avoidance in accordance with HSG47 Vehicle marshalling and banksman duties Operating plant including dumpers and rollers General groundworks and civil engineering activities associated with substation construction Essential Requirements: National Grid Person Authorisation National Grid Substation HSG47 (2-Day Course) Dumper Ticket 360 Excavator Ticket Slinger/Signaller Qualification Previous experience working on National Grid or HV substation projects Full PPE Ability to start on 22nd June 2026 Important: Please do not apply unless you hold all of the essential tickets and experience listed above. Candidates who do not meet the required criteria will not be considered. If you are interested and available, please send your CV along with copies of your tickets and certifications for immediate consideration. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age
Jun 10, 2026
Contractor
Job Title: Civil Operatives (Groundworkers) - National Grid Substation Project Location: Long Lane, Whiston, Rotherham (GGP Project) Start Date: 22nd June 2026 Duration: Until 28th August 2026 Hours: 45 Hours per Week Rate: 27.00 per hour Positions Available: 2 Contract Type: Temporary We are currently recruiting for 2 experienced Civil Operatives/Groundworkers to join a major National Grid substation project in Rotherham on behalf of a leading energy infrastructure contractor. This is an excellent opportunity for operatives with previous substation experience who are competent in excavation, ducting, drainage, and associated civil works within a high-voltage environment. Duties will include: Surface water, foul water, and oily water drainage installations HV & LV ducting works and draw pit installations Installation of HV & LV precast troughs Excavation works and safe digging practices Blinding and concrete placement to foundations Reinstatement of excavations, including backfilling and compaction Hand digging and service avoidance in accordance with HSG47 Vehicle marshalling and banksman duties Operating plant including dumpers and rollers General groundworks and civil engineering activities associated with substation construction Essential Requirements: National Grid Person Authorisation National Grid Substation HSG47 (2-Day Course) Dumper Ticket 360 Excavator Ticket Slinger/Signaller Qualification Previous experience working on National Grid or HV substation projects Full PPE Ability to start on 22nd June 2026 Important: Please do not apply unless you hold all of the essential tickets and experience listed above. Candidates who do not meet the required criteria will not be considered. If you are interested and available, please send your CV along with copies of your tickets and certifications for immediate consideration. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age
VGC Group are recruiting for the following position: Role SSE Cat3A Supervisor Location Nigg, Aberdeen (AB12) Salary/Rate £34 (PAYE) + Paid Holidays Duration 1 Week, Monday 13th - Friday 17th October Overview: SSE Cat 3a Supervise a Working Party in an Exposed Live HV S/S Open Buzz Bar Compound Required Qualifications: SSE Cat3a Manuel Handling First Aid at Work EUSR Utility SHEA Power Slinger/Signaller COSHH + Fire Safety Awareness VGC Group is committed to equality, diversity, and inclusion. VGC is acting as an employment business. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. INDBSCOT
Oct 08, 2025
Contractor
VGC Group are recruiting for the following position: Role SSE Cat3A Supervisor Location Nigg, Aberdeen (AB12) Salary/Rate £34 (PAYE) + Paid Holidays Duration 1 Week, Monday 13th - Friday 17th October Overview: SSE Cat 3a Supervise a Working Party in an Exposed Live HV S/S Open Buzz Bar Compound Required Qualifications: SSE Cat3a Manuel Handling First Aid at Work EUSR Utility SHEA Power Slinger/Signaller COSHH + Fire Safety Awareness VGC Group is committed to equality, diversity, and inclusion. VGC is acting as an employment business. VGC Group are one of the UK's leading labour supply companies, supporting major tier one contractors on some of the most exciting infrastructure projects in the country. As a people business, we genuinely invest in supporting and developing our workforce, and aim to create opportunities for our workforce to progress. INDBSCOT
We are looking for experienced Steel Erectors to join our team on a major cement plant project in Sheerness. This role involves the erection of approximately 350T of structural steelwork, including columns up to 18 metres in length. Candidates must be confident working on large-scale industrial steel erection projects and committed to maintaining high safety standards. Key Details: 10-hour shifts, 6 days per week Phase 1: Approx. 6 weeks (Phase 2 to commence shortly after) Immediate start available Competitive rates depending on experience and qualifications Responsibilities: Erecting, aligning, and bolting heavy steel columns and structures Working with columns up to 18m in length Reading and interpreting technical drawings and lift plans Ensuring all work is carried out in line with strict health & safety standards Coordinating with crane teams and site supervisors Requirements: Valid CSCS / NVQ Level 2 in Steel Erecting (essential) IPAF, CPCS/NPORS (Slinger/Signaller or Crane Supervisor beneficial) Proven experience in heavy steel erection and working at height
Oct 07, 2025
Contractor
We are looking for experienced Steel Erectors to join our team on a major cement plant project in Sheerness. This role involves the erection of approximately 350T of structural steelwork, including columns up to 18 metres in length. Candidates must be confident working on large-scale industrial steel erection projects and committed to maintaining high safety standards. Key Details: 10-hour shifts, 6 days per week Phase 1: Approx. 6 weeks (Phase 2 to commence shortly after) Immediate start available Competitive rates depending on experience and qualifications Responsibilities: Erecting, aligning, and bolting heavy steel columns and structures Working with columns up to 18m in length Reading and interpreting technical drawings and lift plans Ensuring all work is carried out in line with strict health & safety standards Coordinating with crane teams and site supervisors Requirements: Valid CSCS / NVQ Level 2 in Steel Erecting (essential) IPAF, CPCS/NPORS (Slinger/Signaller or Crane Supervisor beneficial) Proven experience in heavy steel erection and working at height
We are currently looking for a High Voltage Maintenance Technician for our client based in the East of England. This is a permanent opportunity to join a great company with career prospects. Areas covered will range from Kings Lynn to Southend. Candidates will be placed closest to their home locations. This role will be within the MEICA and capital maintenance- Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. As the next HV Electrician, you'll work within a small team carrying out the installation, maintenance, and repair of high-voltage (HV) electrical equipment and systems to ensure safety, compliance and operational efficiency. The role involves working in the distribution network sector, supporting asset availability and critical maintenance works. General maintenance routines, periodic testing, inspection and associated remedial works. Installation of power systems on-site and assisting station engineers with reported defects. Installation and maintenance of both AIS and GIS substation equipment. Maintenance of HV equipment such as power transformers (up to 132kV), earth switches, disconnectors, CTs, protection panels, battery chargers, SCADA panels, etc., within new or existing substations to ensure compliance with DNO/IDNO specifications. Installation and maintenance of switchgear from low voltage up to 132kV. Installation of prefabricated steel work and cable containment. Testing and inspection of installations, including cable testing (insulation resistance, continuity), ductor testing, and recording results. Glanding and termination of SWA and multicore cables. Interpreting engineering drawings and specifications to determine assembly requirements. Assembling components using hand tools, power tools, and other necessary equipment. Conducting quality checks on completed assemblies to ensure compliance with standards. Panel wiring following line drawings and core sheets. Ensuring compliance with all health, safety, environment, and quality policies, procedures, and standards at all times. Collaborating with team members to troubleshoot issues. Maintaining a clean and organized work environment, adhering to health and safety regulations. What you'll bring: Proficient in the use of hand tools and power tools for assembly tasks. Strong understanding of safe systems of work within a substation. Excellent attention to detail and ability to follow precise instructions. Strong problem-solving skills and ability to work under pressure. Effective communication skills, both verbal and written, for collaboration with team members. Qualifications: City & Guilds 2339-17 (or equivalent) Level 3 Power Networks Craftsperson Qualification Level 3 in Electrical Engineering Level 3 NVQ Electrical Maintenance (or Installations) BSth Edition Wiring Regulations Additional Qualifications (desirable): Emergency First Aid at Work Confined Space A, B & C certifications EUSR PAF 3a and 3b PASMA Ladder Association Inspector & User certifications Slinger/Sig and Telehandler certifications Staff benefits include: Company van/vehicle and fuel card for business use 25 days annual leave plus bank holidays Recommend a friend - get rewarded for introducing people to us! Matched or contributory pension scheme Employee Assistance Programme My Rewards portal, access to 1000's of retail discounts Life assurance Cycle to work scheme 40 hours per week, Overtime is offered when available.
Oct 07, 2025
Full time
We are currently looking for a High Voltage Maintenance Technician for our client based in the East of England. This is a permanent opportunity to join a great company with career prospects. Areas covered will range from Kings Lynn to Southend. Candidates will be placed closest to their home locations. This role will be within the MEICA and capital maintenance- Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. As the next HV Electrician, you'll work within a small team carrying out the installation, maintenance, and repair of high-voltage (HV) electrical equipment and systems to ensure safety, compliance and operational efficiency. The role involves working in the distribution network sector, supporting asset availability and critical maintenance works. General maintenance routines, periodic testing, inspection and associated remedial works. Installation of power systems on-site and assisting station engineers with reported defects. Installation and maintenance of both AIS and GIS substation equipment. Maintenance of HV equipment such as power transformers (up to 132kV), earth switches, disconnectors, CTs, protection panels, battery chargers, SCADA panels, etc., within new or existing substations to ensure compliance with DNO/IDNO specifications. Installation and maintenance of switchgear from low voltage up to 132kV. Installation of prefabricated steel work and cable containment. Testing and inspection of installations, including cable testing (insulation resistance, continuity), ductor testing, and recording results. Glanding and termination of SWA and multicore cables. Interpreting engineering drawings and specifications to determine assembly requirements. Assembling components using hand tools, power tools, and other necessary equipment. Conducting quality checks on completed assemblies to ensure compliance with standards. Panel wiring following line drawings and core sheets. Ensuring compliance with all health, safety, environment, and quality policies, procedures, and standards at all times. Collaborating with team members to troubleshoot issues. Maintaining a clean and organized work environment, adhering to health and safety regulations. What you'll bring: Proficient in the use of hand tools and power tools for assembly tasks. Strong understanding of safe systems of work within a substation. Excellent attention to detail and ability to follow precise instructions. Strong problem-solving skills and ability to work under pressure. Effective communication skills, both verbal and written, for collaboration with team members. Qualifications: City & Guilds 2339-17 (or equivalent) Level 3 Power Networks Craftsperson Qualification Level 3 in Electrical Engineering Level 3 NVQ Electrical Maintenance (or Installations) BSth Edition Wiring Regulations Additional Qualifications (desirable): Emergency First Aid at Work Confined Space A, B & C certifications EUSR PAF 3a and 3b PASMA Ladder Association Inspector & User certifications Slinger/Sig and Telehandler certifications Staff benefits include: Company van/vehicle and fuel card for business use 25 days annual leave plus bank holidays Recommend a friend - get rewarded for introducing people to us! Matched or contributory pension scheme Employee Assistance Programme My Rewards portal, access to 1000's of retail discounts Life assurance Cycle to work scheme 40 hours per week, Overtime is offered when available.
Norse are looking for a Lift Supervisor / Slinger for a job in Cambridge. Lift Supervisor/Slinger would need relevant qualifications for the job. CPCS/NPORS and a CSCS/ Lift Supervisor/ Slinger would need relevant experience on the job. Lift Supervisor/ Slinger would need relevant PPE - 5 point Lift supervisor / slinger would start on the 15th September. Please call the contact below or please apply and we will get in touch with you.
Oct 06, 2025
Seasonal
Norse are looking for a Lift Supervisor / Slinger for a job in Cambridge. Lift Supervisor/Slinger would need relevant qualifications for the job. CPCS/NPORS and a CSCS/ Lift Supervisor/ Slinger would need relevant experience on the job. Lift Supervisor/ Slinger would need relevant PPE - 5 point Lift supervisor / slinger would start on the 15th September. Please call the contact below or please apply and we will get in touch with you.
We are currently looking for a Curtain wall fixer / Slinger for a contract in the Hackney Wick London area. You will be required to undertake installation of curtain wall and will also be required to do slinging works 1/2 times per week when deliveries arrive 20- 21 per hour 9 hours CIS If available please call Joe (phone number removed)
Oct 06, 2025
Seasonal
We are currently looking for a Curtain wall fixer / Slinger for a contract in the Hackney Wick London area. You will be required to undertake installation of curtain wall and will also be required to do slinging works 1/2 times per week when deliveries arrive 20- 21 per hour 9 hours CIS If available please call Joe (phone number removed)
