117 jobs found

C&I Technician (Control & Instrumentation) 1 year Contract Oxfordshire IR35: Inside Minimum Requirement: The purpose of this role is primarily expected to provide C&I Technician (Control & Instrumentation) support to the MAST-U facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and fault finding. The Role: Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); to support fault finding and repair work on C&I systems associated with the MAST-U facility. Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Take ownership of technical delivery of tasks. Be capable of undertaking delicate and fragile work e.g., thermocouple connections. Generate and maintain appropriate documentation relevant to the above tasks including writing safe systems of work. Essential Qulations. Apprentice trained with relevant experience working in an industrial environment on 3-phase power systems. C&G2330 Level 3 Certificate in Electrotechnical Technology or equivalent qualifications such as an ONC/HNC in Electrical or Electronic Engineering will be acceptable 18th Edition Wiring Regu

Our client, a manufacturing company based in Orpington, who supply to mainly the pharmaceutical/medical market, is looking for a Shop Floor Mechanical /Assembly Technician to join their team. Our client is seeking someone with mechanical, assembly skills, who is physically fit as the successful candidate will be involved in the build/assembly of large medical equipment. Job Description: Our client, a manufacturing company based in Orpington, who supply to mainly the pharmaceutical/medical market, is looking for a Shop Floor Mechanical /Assembly Technician to join their team. Our client is seeking someone with mechanical, assembly skills, who is physically fit as the successful candidate will be involved in the build/assembly of large medical equipment. Hours of work : Monday to Thursday 8 am to 5 pm & Friday 8 am to 1 pm. 23 days holiday plus Bank Holidays . About the role : Fabrications/assembly of steel framework through to the final stage of the build Install electrical chassis and connect wiring looms Installation of pneumatic assemblies and systems to meet operational specifications Read schematics, diagrams, and technical orders to determine methods Previous mechanical assembly technician experience Experience with brazing/soldering is an essential skill required for this role. Previous experience: Previous experience within an engineering environment Must have good mechanical skills and have experience using associated tools Experience with soldering and assembly of mechanical products Must be able to read technical drawings Some heavy lifting involved Suitable candidate : Must be detail-oriented Enthusiasm and professional Able to plan, set, and meet deadlines Must be able to read technical drawings Work well on your own and as part of a team. Tools & equipment used: Hand tools, Air tools, Braising, MIG, T.I.G welding. Pallet trolleys, Pillar drills, Bench grinders. If you have the necessary skills and would like more information regarding this role please apply, attaching your up-to-date CV.

Mechanical & Electrical Vehicle Technician (Contract) Leamington Spa, Warwickshire £18.00 £19.00 per hour Full-time Monday Friday (Days) Ongoing long-term contract Recruitable Staffing are recruiting for an experienced Mechanical & Electrical Vehicle Technician to join a busy automotive/manufacturing environment in Leamington Spa. This is a long-term, ongoing contract with stable weekday hours and competitive pay. Duties include: Mechanical fitting/assembly of vehicle components Routing, running and securing cables and looms Building, fitting and connecting wiring looms to spec Connecting lights, switches, sensors, control units and other electrical components Working from wiring diagrams, build sheets and technical instructions Basic fault finding, testing and visual inspections Maintaining quality, safety and build standards What we re looking for: Previous experience in vehicle build/automotive manufacturing (mechanical + electrical) Strong vehicle wiring skills (cable routing, loom installation, high-quality finish) Able to read wiring diagrams and follow technical instructions Reliable, detail-focused, quality-first approach Right to work in the UK What s on offer: £18.00 £19.00 per hour Monday to Friday, day shifts only Supportive team and modern working environment Ongoing long-term contract Apply now: Submit your CV or contact Recruitable Staffing for more information. Quick one: do you want me to add your contact details at the bottom (phone/email), or keep it apply with CV only for Indeed?

Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self-drive plant equipment, with a strong reputation for delivering high-quality, reliable machinery to the UK s largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Field Service Engineer Purpose: The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a mobile role working on plant machinery out on customer sites. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites. This also includes the checking and verification of all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to our new Field Service Engineer to develop knowledge in machine control technology, plant electronics, and digital construction systems. Field Service Engineers Key Responsibilities Installation & System Integration • Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers, and graders. • Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. • Carry out sensor installation, GPS antenna mounting, wiring, and system configuration within the depot workshop. Service & Maintenance • Perform routine servicing, testing, and maintenance of machine control and HFR systems. • Diagnose and repair electrical, electronic, and mechanical faults relating to installed technology. • Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks • Calibrate sensors, machine control components, and system parameters to ensure accurate operation. • Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup • Upload machine control data including DTM files and digital terrain models where required. • Assist with system configuration and data preparation using office-based computer systems. Workshop Support • Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. • Assist with equipment preparation, upgrades, and system improvements. The Field Service Engineer will need : • Experience working with construction plant, agricultural machinery, or heavy equipment. • Background as a mechanical technician, or workshop engineer is desirable. • Basic understanding of mechanical, electrical installations. • Comfortable working with computers and electronic equipment. • Full UK driving licence desirable. Key Skills & Attributes • Strong mechanical and technical aptitude • Attention to detail and accuracy • Problem-solving and fault-finding ability • Positive attitude and willingness to learn new technologies • Ability to work effectively within a workshop team • Flexible and proactive approach to work Additional Information • Static, depot-based role • Occasional travel may be required for training purposes only • Full training provided in GPS Machine Control and HFR technology • Company equipment such as laptop and mobile phone provided where required If this Field Service Engineer role is of interest, click apply now.

Overview Benefits: Company van provided Accommodation and travel expenses included Exciting opportunity to visit and work at various sites across the UK Job Description: We are seeking a dedicated and qualified Facilities Technician to join our team. The successful candidate will be responsible for supporting new builds and refurbishing existing properties at our various locations across the UK. This role is perfect for someone who enjoys travelling and working in different environments. Responsibilities Key Responsibilities: Lead on all electrical maintenance and installation tasks across our UK sites Carry out troubleshooting and repairs, including basic plumbing, ground maintenance, and decoration Attend to emergency works as needed Support project works and annual compliance checks (e.g. EICR, PAT testing) Collaborate with the wider Facilities team to ensure safe, compliant, and efficient operations Qualifications NVQ 2 Level and/or City & Guilds Level 3 in Electrical Installation 18th Edition Wiring Regulations qualification (desirable) Experience in facilities or building maintenance A valid UK driving licence and willingness to travel extensively A proactive, problem-solving mindset and a team-focused attitude Why Join Us? Be part of a supportive, skilled, and friendly Facilities team Enjoy a varied role where no two days are the same Access to a competitive salary and benefits package Opportunities for training and development Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.

EDS Test Engineer - (phone number removed) - £27.30/hr umbrella rate Do you have EDS experience with a strong understanding of wiring diagrams and vehicle/component testing? Are you ready to step into an exciting opportunity that challenges your skills and offers room for growth? This role as an EDS Test Engineer CST Upper Body is your chance to work in a dynamic environment where innovation meets precision engineering. Join a company renowned for its cutting-edge projects and commitment to delivering world-class physical verification and validation services. With a focus on testing the structural integrity of vehicle harnesses, this position offers the perfect blend of technical expertise and hands-on problem-solving. If you're passionate about engineering excellence and want to make a real impact, this is the role for you. What You Will Do: • Set up and execute EDS structural tests using advanced robotics and hydraulics methodologies with minimal supervision. • Conduct physical rig testing in line with established standards and procedures, ensuring timely and high-quality delivery. • Prepare test rigs and samples, execute test processes, analyse data, and report results clearly and concisely. • Collaborate with stakeholders, including engineers, technicians, and subject matter experts, to ensure seamless test execution. • Identify and implement improvements for test facilities and methodologies, enhancing efficiency and reliability. • Maintain test facilities to high operational standards and support audits for quality, health, safety, and environmental compliance. What You Will Bring: • Strong understanding of wiring diagrams and vehicle/component testing. • Knowledge of instrumentation and data acquisition systems. • Experience with electrical testing techniques and tools, such as multimeters, oscilloscopes, and CAN/LIN communication tools. • Ability to apply basic project planning principles to support facility scheduling. • A collaborative mindset and excellent communication skills to work effectively in a team environment. As an EDS Test Engineer CST Upper Body, you will play a crucial role in ensuring the reliability and durability of vehicle systems. Your expertise will contribute to the company s mission of delivering robust test solutions that meet the highest standards of quality and innovation. You ll be part of an agile team that values continuous improvement and customer-centric service delivery, making every day an opportunity to learn and grow. Location: The main location is Whitley, Coventry with occasional support required on site at Gaydon, depending on the nature of the work. Interested?: Don t miss the chance to take your career to the next level. Apply now to become an EDS Test Engineer CST Upper Body and be part of a team that drives innovation and quality in engineering. This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

HV Technician Field Based About the Role: We are currently seeking a HV Technician, you will be responsible for wiring, installing, and testing HV systems across various industrial and utility projects. Key Responsibilities: Install and terminate HV cables and control wiring on 33kV+ systems. Read and interpret electrical schematics and layout drawings. Work with switchgear, transformers, and protection panels. Carry out testing and commissioning alongside engineering teams. Maintain compliance with HSE standards and electrical safety regulations. Complete job documentation and site reports. Requirements: Experience working on high voltage networks. Recognised electrical qualifications (e.g. NVQ Level 3, C&G 2365/2357). Experience in substations and HV environments. Strong knowledge of control, protection, and HV equipment. Full UK driving licence. HV Technician - Field Based Job Type: Full-time / Permanent Salary: £50,000 - £60,000 Start Date: Immediate / ASAP To discuss this opportunity further, please click Apply Now for a no obligation chat with your VIQU Energy consultant. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU Energy offers an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). HV Technician Field Based

Job Title: Test Engineer - R&D Location: Cambridge Salary: £45,000 to £60,000 Employment Type: Permanent Working Arrangements: Onsite working We have a fantastic opportunity for a Test Engineer to support hands on R&D activities across early stage prototypes. You ll take ownership of test planning, test execution, data capture, and debugging, working closely with design engineers and technicians to push new concepts toward robust, manufacturable products. You ll also write simple test scripts or small pieces of test code (Python or C) to support testing and data capture. What you ll be doing - Driving test activities across prototype hardware and early product builds - Creating test specifications, procedures, and documentation for new features and systems - Designing and building test rigs, fixtures, and setups to support repeatable testing - Running structured tests, capturing data, and ensuring results are clearly documented - Debugging issues, identifying root causes, and feeding findings back into the design team - Supporting iterative development cycles and helping shape test strategy for new products - Writing basic test scripts or small test programs (Python or C) to support test execution and data handling Key skills & experience - Strong hands on experience testing prototype hardware or R&D stage products - Ability to write simple test scripts or basic test code in Python or C - Ability to write clear, structured test specs, test plans, and documentation - Comfortable building test rigs, wiring setups, and using lab equipment - Confident with oscilloscopes, multimeters, power supplies, and general bench tools - Good analytical and problem solving skills, especially in debugging hardware issues - Experience working with design, electronics, or embedded teams is beneficial Why this role? - Work at the heart of R&D on genuinely new technology - High ownership across test strategy, execution, and problem solving - Collaborative engineering environment with real technical depth For more information, please contact Cathy Swain. T: (phone number removed) E: (url removed)

Are you an experienced HVAC and refrigeration technician who enjoys solving complex challenges and sharing your expertise with others? Our client, a well-established rental equipment provider, is looking for an experienced Senior Install Technician to join their growing team. As a Senior Technician, you'll play a key role in ensuring temporary equipment performs reliably. You'll diagnose complex mechanical and electrical issues, complete detailed service documentation and test equipment to guarantee readiness before deployment. Your expertise will be essential in maintaining service standards, supporting customers with technical guidance and mentoring junior team members as they develop their skills in the field. Key Responsibilities: Carry out installation, commissioning, maintenance and repair work on rental equipment, including HVAC and power generation systems. Diagnose and resolve electrical and mechanical faults. Inspect and test equipment to confirm it is operating correctly and ready for use. Provide technical support and advice to customers on the operation of equipment. Maintain accurate service reports and maintenance records. Mentor and assist junior technicians with training and skill development Who They re Looking for: Previous experience working with HVAC, power generation or similar industrial equipment. Strong chiller knowledge Strong fault-finding abilities across mechanical and electrical systems. The ability to interpret wiring diagrams, technical drawings and service manuals. F-Gas qualification desirable A full UK driving licence. What's on offer Company vehicle Life cover Company heath care scheme Death in service Enhanced pension 25 days holiday + bank holidays Option to purchase additional holiday Fantastic career progression opportunities If you are looking for a new opportunity to put your technical expertise to work with a leading provider of rental solutions? Apply today to find out more.

Role: Electrical Qualifying Supervisor Location: Bristol Contract: Permanent 40 hours per week Salary: 46,852.77 per annum Job Purpose: To comply with NICEIC Registration (this is subject to the rules of the NICEIC Registration which is separate from this job description). Oversee electrical safety including but not exclusively the preparation and enforcement of City FM electrical safety procedures (including the process for live and dead working) and practice, promote and oversee the process for electrical installation and minor works certification, undertake a minimum 10% audit of minor works, emergency lighting certification and 100% Installation Certification, assist to co-ordinate provide a specialist support on electrical issues. Ensure all electrical test equipment is annually calibrated and maintain up to date records as appropriate. To assist in the delivery of an effective electrical safety process and ensure City Facilities Management (UK) Ltd meets its statutory responsibilities and promote a safe working environment and safe systems of work for employees, clients and those affected by our undertaking related to any electrical work. Key Accountabilities: Safety Have an understanding of, and day to day responsibility for, the health and safety and other statutory requirements relating to electrical work undertaken. Brief out an electrical safety policy and practice guidelines for field engineers to follow. Ensure there are safe systems of work in place whereby all electrical work People To attend training courses as and where necessary and to ensure personal job skills keep pace with technical developments. Excellence Undertake scheduled audits and inspections of electrical work undertaken; this is likely to be a minimum of 10% of minor works carried out. Undertake audits and inspections, desktop and site visit, of electrical works completed by sub contractors. Service Ensure as far as is reasonably practicable that not only legislative requirements are met but equally industry standards are observed. The appropriate prescribed forms of certification and reporting are issued and completed for all minor electrical work and installations. Ensure electrical test equipment is calibrated annually, maintaining a register of test equipment, ensuring all minor electrical installation work is checked by qualified engineers and the readings recorded and all such paperwork maintained with a copy at each store and a central copy available for inspection. Ensure electrical work undertaken by City FM engineers is fully compliant with current statutory obligations including the Electricity at Work Regulations 1989, Institute of Electrical Engineers Codes of practice and current electrical industry standards. Maintain documentation and records appropriate to the range and scale of electrical work undertaken which shall include BS 7671 requirements for Electrical Installations (IEE Wiring Regulations), associated guidance material as prescribed by the NICEIC and City FM, appropriate British Standard and other Industry Codes of Practice, prescribed forms of certification and reporting for the range of electrical work undertaken. Conversant with the Electricity at Work Regulations, BS 7671, associated guidance material as prescribed by the Council, appropriate British Standard and other appropriate Industry Codes of Practice. To represent the company in a professional manner at all times and develop a good working relationship with the Technicians and colleagues. Well versed in the inspection, testing, verification, certification and reporting procedures for the range of electrical work undertaken by the company. Cover stores throughout the area nominated for the post holder. Other To comply with any other reasonable request or instruction from Management. Knowledge, Skills and Abilities: Electrical Competency Qualification (NVQ Level 3 minimum/City & Guilds or equivalent) 18th edition. City and guilds 2391 Inspection and Testing of Electrical Installations or equivalent GCSE standard Apprentice served electrician with appropriate City & Guilds qualification At least two consecutive years managerial or supervisory responsibility for the technical standard of electrical installation work. 3 phase electrics and its applications. Ability to maintain/repair a range of electrical and mechanical equipment, e.g. fans, pumps and compressors, to recognized standards

About the Role RG Setsquare is recruiting on behalf of a leading facilities management contractor for an experienced HVAC Technician to join their team covering the M40 corridor between Coventry and Oxford. This is a field-based role working on a high-profile large retail estate - a busy, well-supported environment where the standard of technical delivery genuinely matters. You will be responsible for planned and reactive HVAC and gas maintenance across a portfolio of large-format retail sites, working to clear SLAs and high expectations of customer service. The package is one of the strongest we are currently marketing for this type of role: a total salary of 47k inclusive of standby payment, with overtime, paid travel time, 33 days holiday, private healthcare, life insurance, and pension on top. What You'll Be Doing Completing the planned preventive maintenance (PPM) schedule across your allocated sites, ensuring all paperwork is completed accurately and to the required procedures Responding promptly to reactive service calls and alarm requests from the central helpdesk, assessing job requirements and carrying out repairs within agreed response times Servicing and maintaining a wide range of HVAC assets including air handling units with gas-fired heating, LPHW systems, DX coils, heat pump systems, single split air conditioning, LPHW boilers, pumps, inverters, DHW boilers, and water chillers Identifying non-repairable faults in plant and machinery and making clear recommendations to your line manager regarding suitable replacements Updating job and call status on the client's CAFM system following every site visit Delivering all work in full compliance with Health, Safety & Environmental policies Representing the business professionally with client site teams at all times - a friendly, can-do approach is as important here as the technical ability What We're Looking For Essential qualifications - you must hold all of the following: Commercial gas qualifications - as a minimum: COCN1, CCCN1, CIGA1, CORT1, ICPN1, BMP1, CCP1, TPCP1, TPCP1A F-Gas - City & Guilds 2079-11 Level 2 Certificate Unvented water heaters - HWSS Hot Water Systems & Safety (including G3 Unvented HWS) Full UK Driving Licence Desirable: 18th Edition Wiring Regulations (City & Guilds 2382-18) or 17th Edition (City & Guilds 2382-15) The ideal candidate will also bring: Proven experience in HVAC and gas maintenance within a multi-site commercial or retail FM environment A professional, customer-focused approach - you will be working in live retail environments and dealing with site managers daily Strong self-management skills - comfortable planning your own day and hitting response time SLAs without close supervision A positive, flexible attitude and willingness to travel daily across the M40 corridor patch The Package This is a genuinely strong package for the HVAC market in the Midlands: 467k total salary - inclusive of standby payments (1 in 4 rota) Overtime paid on top of base salary Paid travel time 33 days holiday (inclusive of bank holidays) Private healthcare Life insurance Private pension Employee discount scheme Company vehicle How to Apply This vacancy is being managed by RG Setsquare. To be considered, please submit your CV via CV-Library. Shortlisted candidates will be contacted directly by our team with full details on the client, the patch, and next steps in the process. RG Setsquare specialises in technical and FM recruitment across the UK, placing skilled trades and engineering professionals with leading contractors and service providers at every level. A strong package, a high-profile client, and a varied technical role. Apply now. RG Setsquare is acting as an Employment Agency in relation to this vacancy.

Trainee Digital / GPS / HFR Plant Technician About Flannery Plant Hire Flannery Plant Hire is a leading provider of operated and self-drive plant equipment, supporting some of the UK's largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability, embracing the latest technology to improve safety, efficiency and performance across the construction industry. Start Your Career in Construction Technology Are you practical, curious about technology, and looking to build a long-term career? We're looking for enthusiastic individuals to join our team as Trainee Digital / GPS / HFR Plant Technicians. This is an exciting opportunity to learn specialist skills in machine control and safety technology used on modern construction equipment. No previous experience working on plant machinery is required. If you have a positive attitude, enjoy problem-solving and are eager to learn, we'll provide all the training and support you need to succeed. Job Purpose As a Trainee Digital / GPS / HFR Plant Technician, you'll work alongside experienced engineers to prepare construction machinery with advanced digital systems before it is deployed to customer sites. You'll receive hands-on training in the installation, testing and maintenance of GPS Machine Control systems and Human Form Recognition (HFR) safety technology, helping to ensure our equipment is safe, accurate and ready for operation. This is a depot-based role, offering the opportunity to develop valuable technical skills in a growing area of the construction industry. What You'll Be Doing Learning to Install Digital Systems Assist with the installation of GPS Machine Control systems on construction machinery. Support the fitting of Human Form Recognition (HFR) safety systems designed to improve site safety. Learn how to install sensors, antennas, wiring and electronic components. Help prepare machinery for customer deployment. Supporting Servicing and Maintenance Assist with routine inspections and testing of digital equipment. Learn how to identify and report faults. Support experienced technicians with repairs and maintenance. Help ensure all systems are working correctly before machines leave the depot. Calibration and System Checks Learn how to calibrate machine control systems and safety equipment. Carry out basic system checks and testing under supervision. Develop an understanding of how digital technology improves machine accuracy and performance. Data and Technology Assist with uploading machine data and digital files. Learn how to use specialist software and computer systems. Support the setup and configuration of equipment. Workshop Support Work closely with the workshop team to prepare machinery. Assist with equipment upgrades and improvements. Maintain a clean, organised and safe working environment. Follow all health and safety procedures. What We're Looking For We welcome applications from individuals at the start of their careers, including: School or college leavers. Individuals completing apprenticeships. Junior mechanics or technicians. Those with an interest in engineering, construction or technology. Career changers looking to retrain in a technical role. Skills and Attributes A genuine interest in technology and how things work. Practical and hands-on approach to learning. Positive attitude and willingness to learn new skills. Good attention to detail. Strong communication and teamwork skills. Problem-solving mindset. Reliable, motivated and eager to develop. Qualifications Essential: GCSEs (or equivalent), including Maths and English. Basic IT skills and confidence using computers. Desirable: A qualification in engineering, mechanics, electronics, construction or a related subject. Experience using hand tools through work, education or hobbies. Full UK driving licence (or willingness to work towards obtaining one). What You'll Receive: Full training in GPS Machine Control and HFR technology. Structured development programme with ongoing support. Hands-on experience working with advanced construction technology. Mentoring from experienced technicians and engineers. Opportunities for career progression within Flannery Plant Hire. Company equipment provided where required. The chance to build a rewarding career in a growing and innovative sector. Additional Information This is a full-time, depot-based position. Occasional travel may be required for training purposes. No previous plant fitting experience is necessary. Full training will be provided. Why Join Flannery? At Flannery, we invest in people with potential. If you're ready to learn, develop specialist skills and begin a career working with the latest technology in construction, we'd love to hear from you. Start your future with Flannery today.

Clean Room Technician Reporting to: Cell Team Leader please only apply for this role if you have the right to work in the UK as our client do not provide sponsorship About the Role Our client is seeking a Cleanroom Technician to join their manufacturing team. This role is focused on the assembly of ultra-high vacuum (UHV) manipulation and sample handling sub-assemblies, including pre-test data recording and quality control evaluation within a cleanroom environment. The successful candidate will play a key role in supporting the manufacture of highly specialised, precision-engineered products while maintaining the highest standards of quality and cleanliness. Key Responsibilities Assemble mechanical and electrical components to build complex systems in accordance with engineering drawings and specifications. Carry out specialist UHV-compatible instrument wiring and electrical testing. Maintain strict cleanroom and UHV cleanliness standards for all in-vacuum components and sub-assemblies. Support the transition of new products from New Product Introduction (NPI) into routine production, including the creation of manufacturing documentation, work instructions, and guides. Maintain and update existing manufacturing instructions and process documentation. Support the maintenance of departmental records, including test data, quality control information, and product serialisation records to ensure full traceability. Contribute to continuous improvement activities within the manufacturing environment. Occasional European travel Skills & Experience Essential Basic IT skills, including proficiency in Microsoft Office. Strong attention to detail and commitment to quality. Ability to work effectively under pressure and meet deadlines. Good organisational skills and the ability to manage workload effectively. Desirable Experience within a high-technology manufacturing or cleanroom environment. Previous experience in a low-volume, customised manufacturing environment. Understanding of precision mechanical assembly, specialist wiring techniques, and product testing procedures. Familiarity with the manufacture of UHV-compatible devices and instrumentation, particularly those incorporating electron optics or ion optics principles. Qualifications Preferred Relevant engineering qualification such as a Degree, HND, or HNC in Mechanical Engineering, Electromechanical Engineering, or a related discipline. Mechanical Engineering Level 3 qualification. Time-served apprenticeship or equivalent engineering experience will also be considered. Personal Attributes Resilient and able to perform effectively in a demanding environment. Organised, reliable, and punctual. Excellent attention to detail. Strong work ethic and commitment to delivering high-quality work. Team-oriented with a proactive approach to problem-solving. Will need to train to Level 2 Leak Tester so must have a good grasp of mathematics What Our Client Is Looking For This opportunity would suit a hands-on engineering professional who enjoys working with precision components in a highly specialised manufacturing environment. The successful candidate will be motivated by quality, accuracy, and continuous improvement, with a desire to contribute to the production of advanced technology products.

Electrician / Electrical Inspector (CompEx) Excellent opportunity for an Electrician / Electrical Inspector (CompEx) carrying out ATEX inspections, electrical installation, fault finding, electrical rectifications and EC&I work across oil & gas, pharmaceutical, chemical, manufacturing and process industry environments. If you've also worked in the following roles, we'd also like to hear from you: ATEX Inspector, Field Service Engineer, Hazardous Area Electrician, Instrumentation Technician, Electrical Technician, CompEx Inspector, CompEx Electrician, Hazardous Area Inspector, EC&I Technician, EC&I Engineer SALARY: Up to £55,000 per annum (dependent on qualifications and experience) + Car + Benefits LOCATION: Field based across the North West. However, candidates based within the M60 would be favourable due to the client base. JOB TYPE: Full-Time, Permanent JOB OVERVIEW The company continues to expand its Field Service Team, creating an exciting opportunity for a CompEx Electrical Inspector / Electrician to join a forward-thinking organisation delivering specialist EC&I and engineering solutions to customers across multiple process industries. As a CompEx Electrical Inspector / Electrician you will conduct hazardous area inspections, complete ATEX assessments, undertake electrical installation work, fault finding and electrical rectifications, and support instrumentation activities across aerospace, food, beverage, pharmaceutical, chemical and oil & gas sectors. You will work with containment systems, cable installations, electrical wiring diagrams and area classification reports to ensure compliance and operational safety. The CompEx Electrical Inspector / Electrician will play an important role in delivering inspection services in accordance with IEC / BS EN 60079 standards while helping improve reliability, minimise downtime and maintain safe customer operations across the UK and EU. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CompEx Electrical Inspector / Electrician include: ATEX Inspections: conduct detailed ATEX and CompEx inspections to IEC / BS EN 60079-17 standards Electrical Inspection: identify non-compliances and ensure hazardous area equipment meets required standards Electrical Rectifications: complete high-quality electrical repairs and corrective work to minimise downtime Inspection Reporting: produce accurate reports and communicate findings and risks clearly Documentation Preparation: create comprehensive handover documentation following site inspections Containment Installation: install containment and cable systems to a high standard Electrical Installation: undertake electrical installation work safely and efficiently Technical Interpretation: work from electrical wiring diagrams and area classification reports Instrumentation Support: support instrumentation installation and shutdown projects when required Project Delivery: manage work schedules effectively and deliver work within agreed timescales Continuous Improvement: identify recurring issues and contribute to improved inspection processes Client Relationships: collaborate with customers and internal teams to improve compliance and safety outcomes CANDIDATE REQUIREMENTS ESSENTIAL Current CompEx EX01-04 qualification C&G 2391, 2391-52, or 2394 and 2395 qualification JIB Gold Card or higher with recognised apprenticeship or equivalent Electrician qualification Strong understanding of BS EN 60079-14 and BS EN 60079-17 Proven experience conducting ATEX inspections and producing high-quality reports Experience with glanding, terminating, containment installation and cable systems Proficient in interpreting electrical wiring diagrams and area classification reports Competent using Microsoft Excel, SharePoint and Microsoft 365 Willing to travel throughout the UK and EU including overnight stays Full UK driving licence required Able to develop effective customer relationships and communicate clearly DESIRABLE CompEx EX05-06 qualification Valid CCSNG, JIB or equivalent accreditation Previous experience within a service or field-based engineering environment BENEFITS A base salary of up to £55k dependent on qualifications and experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses here! Paid overnight allowance, every night you spend working away Employee Training Company Events Modern open plan office Free Gym membership within walking distance to HQ Company pension package to secure your future Total holiday package of 31 days Employer-sponsored office attire Employer funded Cash plan. Reimbursement for going to the opticians, dentist, physiotherapists and more! HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14715 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Manchester, Greater Manchester, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online

CAD Technician - Lighting Controls Annual Salary: Up to 50k Location: Chiswick, London Job Type: Full-Time, Permanent, Hybrid We are seeking a CAD Technician to join our innovative Lighting Controls team. This role is ideal for someone with a solid understanding of lighting control systems, particularly DALI-based solutions, and a strong grasp of electrical principles. You will play a crucial role in producing detailed technical drawings and schematics for commercial and architectural lighting projects. Day-to-day of the role: Produce detailed lighting control schematics and wiring diagrams using CAD software. Create and maintain project drawings, including DALI networks, PIR and occupancy sensors, photocells, lighting control panels, emergency lighting interfaces, and user interfaces. Develop control system layouts and device schedules. Interpret client specifications, consultant drawings, and electrical designs to ensure compliance with project requirements, company standards, and industry regulations. Update and revise drawings throughout the project lifecycle to maintain accuracy and efficiency. Required Skills & Qualifications: Experience using AutoCAD or equivalent CAD software. Understanding of electrical principles and wiring practices. Knowledge of DALI (Digital Addressable Lighting Interface) systems and associated control devices. Ability to read and interpret electrical schematics and construction drawings. Strong attention to detail and commitment to producing accurate documentation. Good organisational and communication skills. Ability to manage multiple projects and meet deadlines. Desirable Qualifications: Previous experience within the lighting controls industry. Knowledge of DALI-2 standards and commissioning principles. Electrical qualification (City & Guilds, HNC/HND, NVQ, Degree, or equivalent). Experience producing as-built drawings and technical documentation. Benefits: Competitive salary. Training and development opportunities. Exposure to a wide range of commercial and architectural lighting projects. Supportive and collaborative working environment. Career progression within a growing business. To apply for this CAD Technician position in Lighting Controls, please submit your CV and cover letter detailing your relevant experience and why you are interested in this role.

Global Workplace Solutions is a division of CBRE providing integrated solutions across large multi-discipline property portfolios. We are an organisation that has people at the heart of its culture and our aim for this account is to deliver an exceptional service to BT. Our BT Workplace team provide a full range of building maintenance services to their 7,000 buildings in the UK, from commercial offices and telephone exchanges to call centres and retail shops. We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect Integrity Service Excellence The role: Electrical Technician The purpose of our Electrical Technician role is to support the Technical Supervisor and/or Area Operations Manager providing a reactive and planned preventative maintenance service to building engineering systems and services at various sites in accordance with laid down procedures and safe working practices. To carry out maintenance, fault finding and repair on LV electrical systems as directed by the Area Operations Manager. To ensure that systems are maintained to the appropriate standard as defined by relevant regulations. Key responsibilities are as follows: Maintain all low voltage electrical distribution and connected power/ lighting systems and undertake PPM routines as assigned. Maintain equipment, appliances, apparatus, and fixtures connected to the electrical systems as directed. Delivery of small works projects as instructed by the AFM and in association with the Projects and Construction team. Ensure that all repairs and installations are compliant with current BS7671 wiring regulations. Assist in project hand-over and snagging of new installations to ensure electrical systems are fit for purpose and suitable for ease of maintenance. Undertake fault finding and repair on low voltage AC/DC control systems. Ensure that all test equipment is calibrated, suitably maintained and meets current regulations. Complete suitable risk assessments for reactive and planned maintenance tasks to ensure safe working at all times. Diagnose faults on equipment and repair as necessary using manufacturer s manuals and drawings as required. Liaise with the Customer Service Centre (CSC) and AFM, to ensure appropriate response to planned and reactive tasks. Ensure Site Log Books are completed and updated in accordance with procedures. Produce reports as required for the AFM Maintain stock levels of spares as required Undertake the Control of Works Authorised Person (AP) role and support identification of other relevant APs and Competent Persons (CPs) in cluster. Participate in an Emergency Call Out service as required in accordance with the Out of Hours Rota. Other relevant duties consistent with the general requirements of CBRE service delivery as directed by line management. Accountable for the completion of standard or non-standard tasks within own area Acts as part of a team to delivers activities which support operational objectives Manages a variety of tasks and is able to plan accordingly within the short-term Makes decisions within parameters set by line Manager using job/specialist experience May be subject to regular local supervision of progress against results and escalates issues when required Interacts with stakeholders around specific work efforts and deliverables Supports delivery of Health and Safety policy and standards Oversee the activities of others to meet deadlines and quality standards taking account of impact outside area of responsibility. Supports the identification of ways to reduce cost Has awareness of cost/benefit as applicable to tasks performed May work within a given budget. Able to organise a small team of individuals carrying out similar tasks May be called upon to oversee a team delivering tasks and to escalate individual performance issues to their line manager. Person Specification: For non-supervisory roles performs skilled work requiring technical training (NVQ3 or equivalent) Successful completion of CBRE refresher training in Emergency Circuit Breaker and Fuse Theory; Emergency Lighting Testing and Light Fitting Replacement, including Safe Isolation; Water Heater Testing, including Safe Isolation; and Fire Alarm Testing. Essential qualifications are: - Must have completed an apprenticeship or an equivalent formal training programme in electrical installation and maintenance that includes sufficient relevant practical experience to enable assessment as electrically competent. Must hold a City and Guilds level 3 technical certificate or equivalent in an electrical discipline. Must hold a City and Guilds 2382 Level 3 certificate in the requirements for electrical installations BS 7671 (18th Edition) or equivalent. Note: in exceptional cases an applicant who does not hold C&G 2382 or equivalent may be considered for an ET (elec) role provided that the qualification is obtained within 3 months from date of appointment. Desirable (in addition to the above): Hold a Level 3 NVQ diploma in Electrical Installation or Maintenance e.g. City and Guilds 2357 or equivalent. Achievement Measurement 2 (AM2). Hold a JIB skills card. City and Guilds level 3 certificates in inspection, testing and certification of electrical installations or equivalent. Formal training in operation and maintenance of UPS systems and Generators. PASMA IPAF Manual Handling Asbestos Awareness Confined space working Roof Working C&G 2377 or equivalent - Pat testing. HV plant room access training Our mission: To build a world-class business through exceptional service and exceptional people Why CBRE? Salary & Benefits: Enjoy a competitive salary with a comprehensive benefits programme, designed to make sure you feel valued in your role, with benefits that support the mental, physical, emotional and financial health for you and your family. Learning & Development: Access LinkedIn Learning from day one with over 16,000 courses available, grow through our internal career pathways an unlimited training support on Talent Coach. Values-Based Culture: We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect, Integrity, Service and Excellence. Positive Work Environment: Over 74% of our colleagues would recommend us as a great place to work, according to our latest internal engagement survey. Volunteering Days: Benefit from 2 paid volunteering days per year. Exclusive Discounts: Nuffield gym memberships and restaurant discount cards At CBRE, we value diversity and believe that everyone is extraordinary in their own way. We are an inclusive employer. Even if you are not sure you fit all the requirements for a particular role, we'd still love to hear from you. There may be another opportunity within CBRE that is more suitable for you now or in the future.

Electrical Fitter Location: Peterborough Salary: circa. 36,000 DoE + bonus scheme! 39 hour working week + Lots Overtime Available The Company We're partnering with a leading UK manufacturer of specialist electric industrial vehicles, supplying innovative transport solutions to customers across manufacturing, logistics, healthcare, airports, hospitality and many other sectors. Due to continued growth, they're looking to add an Electrical Fitter to their production team based just outside Peterborough. The Role This is a hands-on position within a busy production environment, building, testing, maintaining and repairing a wide range of electric industrial vehicles and bespoke transport solutions. Working as part of the factory team, you'll be involved in both new vehicle production and fleet preparation, ensuring all vehicles meet the highest standards of quality and reliability. Key Responsibilities Electrical installation and wiring of 12V and 48V vehicle systems Electrical fault finding, diagnostics and repair work Mechanical assembly and fitting of vehicle components Building, testing and preparing vehicles for customer delivery Maintaining high quality, safety and housekeeping standards About You We're keen to speak with candidates from backgrounds such as: Automotive Auto Electrical Vehicle Assembly Plant Machinery Agricultural Equipment Manufacturing You'll Ideally Have Previous experience in a mechanical or electrical engineering role Experience working with 12V and 48V electrical systems Electrical fault-finding and diagnostic skills A practical, hands-on approach with a willingness to learn Welding experience would be advantageous but not essential What's On Offer? Competitive salary with realistic OTE of 36,000 - 48,000 Company profit share bonus scheme Overtime opportunities available Ongoing manufacturer and in-house training Career progression opportunities 29 days holiday including bank holidays Interested? If you're an Electrical Fitter, Auto Electrician, Vehicle Technician or Assembly Technician looking for a varied hands-on role with a growing UK manufacturer, we'd love to hear from you. Apply today

Global Workplace Solutions is a division of CBRE providing integrated solutions across large multi-discipline property portfolios. We are an organisation that has people at the heart of its culture and our aim for this account is to deliver an exceptional service to BT. Our BT Workplace team provide a full range of building maintenance services to their 7,000 buildings in the UK, from commercial offices and telephone exchanges to call centres and retail shops. We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect Integrity Service Excellence The role: Electrical Technician The purpose of our Electrical Technician role is to support the Technical Supervisor and/or Area Operations Manager providing a reactive and planned preventative maintenance service to building engineering systems and services at various sites in accordance with laid down procedures and safe working practices. To carry out maintenance, fault finding and repair on LV electrical systems as directed by the Area Operations Manager. To ensure that systems are maintained to the appropriate standard as defined by relevant regulations. Key responsibilities are as follows: Maintain all low voltage electrical distribution and connected power/ lighting systems and undertake PPM routines as assigned. Maintain equipment, appliances, apparatus, and fixtures connected to the electrical systems as directed. Delivery of small works projects as instructed by the AFM and in association with the Projects and Construction team. Ensure that all repairs and installations are compliant with current BS7671 wiring regulations. Assist in project hand-over and snagging of new installations to ensure electrical systems are fit for purpose and suitable for ease of maintenance. Undertake fault finding and repair on low voltage AC/DC control systems. Ensure that all test equipment is calibrated, suitably maintained and meets current regulations. Complete suitable risk assessments for reactive and planned maintenance tasks to ensure safe working at all times. Diagnose faults on equipment and repair as necessary using manufacturer s manuals and drawings as required. Liaise with the Customer Service Centre (CSC) and AFM, to ensure appropriate response to planned and reactive tasks. Ensure Site Log Books are completed and updated in accordance with procedures. Produce reports as required for the AFM Maintain stock levels of spares as required Undertake the Control of Works Authorised Person (AP) role and support identification of other relevant APs and Competent Persons (CPs) in cluster. Participate in an Emergency Call Out service as required in accordance with the Out of Hours Rota. Other relevant duties consistent with the general requirements of CBRE service delivery as directed by line management. Accountable for the completion of standard or non-standard tasks within own area Acts as part of a team to delivers activities which support operational objectives Manages a variety of tasks and is able to plan accordingly within the short-term Makes decisions within parameters set by line Manager using job/specialist experience May be subject to regular local supervision of progress against results and escalates issues when required Interacts with stakeholders around specific work efforts and deliverables Supports delivery of Health and Safety policy and standards Oversee the activities of others to meet deadlines and quality standards taking account of impact outside area of responsibility. Supports the identification of ways to reduce cost Has awareness of cost/benefit as applicable to tasks performed May work within a given budget. Able to organise a small team of individuals carrying out similar tasks May be called upon to oversee a team delivering tasks and to escalate individual performance issues to their line manager. Person Specification: For non-supervisory roles performs skilled work requiring technical training (NVQ3 or equivalent) Successful completion of CBRE refresher training in Emergency Circuit Breaker and Fuse Theory; Emergency Lighting Testing and Light Fitting Replacement, including Safe Isolation; Water Heater Testing, including Safe Isolation; and Fire Alarm Testing. Essential qualifications are: - Must have completed an apprenticeship or an equivalent formal training programme in electrical installation and maintenance that includes sufficient relevant practical experience to enable assessment as electrically competent. Must hold a City and Guilds level 3 technical certificate or equivalent in an electrical discipline. Must hold a City and Guilds 2382 Level 3 certificate in the requirements for electrical installations BS 7671 (18th Edition) or equivalent. Note: in exceptional cases an applicant who does not hold C&G 2382 or equivalent may be considered for an ET (elec) role provided that the qualification is obtained within 3 months from date of appointment. Desirable (in addition to the above): Hold a Level 3 NVQ diploma in Electrical Installation or Maintenance e.g. City and Guilds 2357 or equivalent. Achievement Measurement 2 (AM2). Hold a JIB skills card. City and Guilds level 3 certificates in inspection, testing and certification of electrical installations or equivalent. Formal training in operation and maintenance of UPS systems and Generators. PASMA IPAF Manual Handling Asbestos Awareness Confined space working Roof Working C&G 2377 or equivalent - Pat testing. HV plant room access training Our mission: To build a world-class business through exceptional service and exceptional people Why CBRE? Salary & Benefits: Enjoy a competitive salary with a comprehensive benefits programme, designed to make sure you feel valued in your role, with benefits that support the mental, physical, emotional and financial health for you and your family. Learning & Development: Access LinkedIn Learning from day one with over 16,000 courses available, grow through our internal career pathways an unlimited training support on Talent Coach. Values-Based Culture: We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect, Integrity, Service and Excellence. Positive Work Environment: Over 74% of our colleagues would recommend us as a great place to work, according to our latest internal engagement survey. Volunteering Days: Benefit from 2 paid volunteering days per year. Exclusive Discounts: Nuffield gym memberships and restaurant discount cards At CBRE, we value diversity and believe that everyone is extraordinary in their own way. We are an inclusive employer. Even if you are not sure you fit all the requirements for a particular role, we'd still love to hear from you. There may be another opportunity within CBRE that is more suitable for you now or in the future.

Auto Electrician Dartford 32,000 - 34,000 (OTE 60,000+) + Company Vehicle + Fuel Card + Door To Door Paid + Plenty of Overtime + Family Feel Company + Holiday + Pension + Sick Pay Progression to Senior Engineer + Immediate Start Currently stagnant where you are? This is a great opportunity to train and develop with a company that offers a fantastic training program.This role is perfect if you are an Auto Electrician looking to work across a variety of vehicles, including cars, lorries, and HGVs, with the chance to earn over 60,000 a year through overtime. Join a specialist vehicle security and electrical systems company where you'll feel valued and supported while developing your skills and career. This well-established company has built a strong reputation across the South East for providing high-quality installations and repairs on vehicle electrical systems, including alarms, tracking systems, and bespoke electrical setups. As an Auto Electrician, you'll enjoy job variety, a supportive team environment, and the chance to progress to Senior Engineer level. With plenty of work and overtime available, you can take control of your earnings. Your Role As An Auto Electrician Will Include: Diagnosing, Repairing, and Installing Electrical Systems on cars, lorries, and HGVs Wiring Work fault finding, fitting, and repairing vehicle electrical systems Installing Alarms, Trackers, and Other Specialist Vehicle Systems As An Auto Electrician, You Will Have: Auto Electrical Experience, Cars, Lorries, HGVs, or Plant Electrical Wiring Knowledge, fault finding & installation Full UK Driving Licence Auto Electrician, Dartford, Vehicle Technician, Crayford, Automotive Engineer, Erith, Diagnostic Specialist, Bexleyheath, Master Technician, Gravesend, Mobile Installer, Greenhithe, Telematics Expert, Swanley, ECU Programmer, Sidcup, Workshop Mechanic, Welling, Fleet Maintainer, Belvedere, HGV Electrician, Bromley, LGV Fitter, Orpington, Bus Technician, Sevenoaks, Plant Engineer, Rochester, Rail Operative, Chatham, Marine Specialist, Maidstone, Forklift Inspector, Rainham, Electro-Mechanical Technician, Aylesford, Service Operative, West Malling, CANbus Analyst, Medway

Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for an Electrical Technician to join their engineering team on a 12-month fixed-term contract. Offering a range of industry-leading benefits, including private healthcare, a generous holiday allowance and other perks, this is an excellent time to join this fast-expanding company in a hands-on maintenance role! Key Responsibilities & Duties: Installation of electrical systems Working with single-phase, three-phase, low-voltage and extra-low voltage electrical circuits Preparation and termination of electrical circuits Troubleshooting electrical instrumentation and mechanical equipment and presenting technical solutions to address these issues Testing electrical systems incorporating PLCs, HMIs, VFDs and relays Commissioning of special build equipment, electrically and mechanically This is just a summed-up list, and other duties will be required. Skills & Experience required: City and Guilds Level 3 in electrical installations or equivalent (mandatory) 18th Edition Wiring Regulations would be highly beneficial. Experience in industrial electrical works Experience wiring and fault-finding PLC controlled equipment Ability to work alone or within a team environment. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)