You'll be part of a Test Rig Design Team who spend about a year designing and building bespoke test rigs for a single test that lasts less than 10 seconds. Your contribution is to select and calibrate a wide range of instruments including transducers, accelerometers, load cells, data acquisition and signal conditioning circuits that will be integrated into these test rigs. Ideally, you'll have experience with hybrid III test dummies, velocity measuring systems, camera control circuits and timing systems too but your core skills must be in working with test instrument calibration One of the UK's leading test instrument experts is retiring so you'll be under his guidance, training and mentoring for at least 12-18 months learning everything about Hybrid 3 test dummies too CV not ready? No problem, just email, text or call me - I'll always get back to you
Jun 23, 2026
Full time
You'll be part of a Test Rig Design Team who spend about a year designing and building bespoke test rigs for a single test that lasts less than 10 seconds. Your contribution is to select and calibrate a wide range of instruments including transducers, accelerometers, load cells, data acquisition and signal conditioning circuits that will be integrated into these test rigs. Ideally, you'll have experience with hybrid III test dummies, velocity measuring systems, camera control circuits and timing systems too but your core skills must be in working with test instrument calibration One of the UK's leading test instrument experts is retiring so you'll be under his guidance, training and mentoring for at least 12-18 months learning everything about Hybrid 3 test dummies too CV not ready? No problem, just email, text or call me - I'll always get back to you
Firewall Engineer Location: Bath (Hybrid) Contract: 12 Months Rate: Competitive (Inside/Outside IR35 to be confirmed) Firewall Engineer - 12 Month Contract - Bath We are currently seeking an experienced Firewall Engineer to join a well-established organisation on an initial 12-month contract. This is an excellent opportunity to work within a complex enterprise environment, supporting and enhancing critical network security infrastructure. The successful candidate will be responsible for the administration, support, troubleshooting and optimisation of firewall technologies, ensuring the security and availability of business-critical systems and services. Key Responsibilities Administer, maintain and support enterprise firewall environments. Implement and manage firewall policies, NAT rules and security controls. Monitor network security infrastructure and investigate security-related incidents. Perform firewall rule reviews and ensure compliance with security standards. Support VPN technologies and remote access solutions. Troubleshoot complex network connectivity and security issues. Collaborate with infrastructure, security and project teams on network-related initiatives. Assist with firewall migrations, upgrades and platform enhancements. Produce and maintain technical documentation. Required Skills & Experience Strong hands-on experience with enterprise firewall technologies such as: Fortinet / FortiGate Palo Alto Networks Check Point Cisco ASA / Firepower Sophos Experience managing site-to-site and remote access VPNs. Strong understanding of networking fundamentals including: TCP/IP Routing & Switching DNS LAN/WAN technologies Experience troubleshooting complex network and security issues. Knowledge of network monitoring and security best practices. Excellent communication and stakeholder management skills. Desirable Skills Experience working within large enterprise or regulated environments. Exposure to network security monitoring tools. Relevant vendor certifications such as: PCNSA / PCNSE NSE CCNA / CCNP Security Check Point CCSA / CCSE
Jun 23, 2026
Contractor
Firewall Engineer Location: Bath (Hybrid) Contract: 12 Months Rate: Competitive (Inside/Outside IR35 to be confirmed) Firewall Engineer - 12 Month Contract - Bath We are currently seeking an experienced Firewall Engineer to join a well-established organisation on an initial 12-month contract. This is an excellent opportunity to work within a complex enterprise environment, supporting and enhancing critical network security infrastructure. The successful candidate will be responsible for the administration, support, troubleshooting and optimisation of firewall technologies, ensuring the security and availability of business-critical systems and services. Key Responsibilities Administer, maintain and support enterprise firewall environments. Implement and manage firewall policies, NAT rules and security controls. Monitor network security infrastructure and investigate security-related incidents. Perform firewall rule reviews and ensure compliance with security standards. Support VPN technologies and remote access solutions. Troubleshoot complex network connectivity and security issues. Collaborate with infrastructure, security and project teams on network-related initiatives. Assist with firewall migrations, upgrades and platform enhancements. Produce and maintain technical documentation. Required Skills & Experience Strong hands-on experience with enterprise firewall technologies such as: Fortinet / FortiGate Palo Alto Networks Check Point Cisco ASA / Firepower Sophos Experience managing site-to-site and remote access VPNs. Strong understanding of networking fundamentals including: TCP/IP Routing & Switching DNS LAN/WAN technologies Experience troubleshooting complex network and security issues. Knowledge of network monitoring and security best practices. Excellent communication and stakeholder management skills. Desirable Skills Experience working within large enterprise or regulated environments. Exposure to network security monitoring tools. Relevant vendor certifications such as: PCNSA / PCNSE NSE CCNA / CCNP Security Check Point CCSA / CCSE
Are you a Graduate Embedded Software Engineer, who is looking to work in a fast paced, global, market leading company? Here at Innovative Technology, we have an excellent opportunity for a Graduate Embedded Software Engineer to join our site-based Research & Development team at our global head office in Oldham, Greater Manchester. The role overview: You will develop firmware / embedded software for our range of products, using a variety of programming languages, tools, and development practices. Working alongside experienced engineers, you will gain hands-on experience in developing, testing, documenting, and maintaining software that helps ensure our devices and systems continue to meet high industry standards. Responsibilities of our Graduate Embedded Software Engineer: Assist in the design, development, testing, and maintenance of embedded software for a range of ITL products. Support the development of PC tools and configuration software used alongside ITL products. Learn and apply source control processes, software release procedures, and coding standards. Contribute to product design documentation, test records, and software development documentation. Help investigate software issues, identify possible causes, and work with experienced engineers to develop appropriate solutions. Support feasibility investigations for new product concepts, product improvements, and software design options. Develop an understanding of hardware constraints and how software interacts with embedded systems. Collaborate with other development teams to help clarify requirements, agree timescales, and support delivery of project objectives. Participate in code reviews, design discussions, and team learning activities to develop technical knowledge and engineering best practice. Essential Skills & Experience: A degree, or equivalent qualification, in Software Engineering, Computer Science, Electronics, Embedded Systems, or a related discipline. Knowledge of C/C++ programming, ideally with some exposure to embedded systems. An interest in firmware, embedded software, microcontrollers, or electronics. Basic understanding of electronic hardware and the ability to interpret schematic diagrams at a graduate level. Familiarity with software development principles, debugging, testing, and problem-solving. Some knowledge of high-level programming languages for PC application development would be beneficial. Awareness of real-time operating systems would be advantageous. Awareness of communication standards and protocols would be advantageous. A willingness to learn, ask questions, and develop technical skills within a supportive engineering team. Your Package & Perks: A competitive salary Flexible working hours 32 days holiday, (including public Holidays) plus the opportunity to earn up to an extra 13 days holiday each year Enhanced maternity/paternity/adoption leave & pay Enhanced Pension Contribution Healthcare Insurance (including dental) Wellbeing support Life Insurance Income Protection Insurance Educational Sponsorship Electric Car Scheme Onsite electric car charging points Free secure parking Cycle to Work Scheme Informal dress code Paid breaks, with free premium hot drinks We re Innovative Trading for over 30 years here at Innovative Technology, where we now have offices on five continents and employ around 400 people, with over 170 based from our state-of-the-art R&D hub. From self-service checkouts to arcade machines, we provide our retail, banking, kiosk, vending, gaming and amusement customers with products and services that help them securely accept automated payments, with our industry-leading technology keeping us at the forefront of our sector. We also provide facial analysis technology for age estimation and control access for some of the world s leading companies. By being true to our values of Innovation, Collaboration, Respect and Drive we ve seen significant growth and won numerous domestic and international awards, whilst offering outstanding career opportunities and great benefits. You ll find us on the edge of the Pennines and less than half an hour from central Manchester, with modern offices, free parking and excellent transport links. We are a disability-confident employer, as such we will shortlist all candidates meeting our minimum criteria (as specified in the job description) who state they have a disability within their application. What s next? If you re a graduate wanting to become an Embedded Software Engineer and want to join our award-winning team working on the latest cutting-edge technology, we want to hear from you. A better way Through our people, drive and commitment we push boundaries to deliver innovative products and services. This is a two-part interview process, starting with a brief telephone screening followed by a formal site-based interview.
Jun 23, 2026
Full time
Are you a Graduate Embedded Software Engineer, who is looking to work in a fast paced, global, market leading company? Here at Innovative Technology, we have an excellent opportunity for a Graduate Embedded Software Engineer to join our site-based Research & Development team at our global head office in Oldham, Greater Manchester. The role overview: You will develop firmware / embedded software for our range of products, using a variety of programming languages, tools, and development practices. Working alongside experienced engineers, you will gain hands-on experience in developing, testing, documenting, and maintaining software that helps ensure our devices and systems continue to meet high industry standards. Responsibilities of our Graduate Embedded Software Engineer: Assist in the design, development, testing, and maintenance of embedded software for a range of ITL products. Support the development of PC tools and configuration software used alongside ITL products. Learn and apply source control processes, software release procedures, and coding standards. Contribute to product design documentation, test records, and software development documentation. Help investigate software issues, identify possible causes, and work with experienced engineers to develop appropriate solutions. Support feasibility investigations for new product concepts, product improvements, and software design options. Develop an understanding of hardware constraints and how software interacts with embedded systems. Collaborate with other development teams to help clarify requirements, agree timescales, and support delivery of project objectives. Participate in code reviews, design discussions, and team learning activities to develop technical knowledge and engineering best practice. Essential Skills & Experience: A degree, or equivalent qualification, in Software Engineering, Computer Science, Electronics, Embedded Systems, or a related discipline. Knowledge of C/C++ programming, ideally with some exposure to embedded systems. An interest in firmware, embedded software, microcontrollers, or electronics. Basic understanding of electronic hardware and the ability to interpret schematic diagrams at a graduate level. Familiarity with software development principles, debugging, testing, and problem-solving. Some knowledge of high-level programming languages for PC application development would be beneficial. Awareness of real-time operating systems would be advantageous. Awareness of communication standards and protocols would be advantageous. A willingness to learn, ask questions, and develop technical skills within a supportive engineering team. Your Package & Perks: A competitive salary Flexible working hours 32 days holiday, (including public Holidays) plus the opportunity to earn up to an extra 13 days holiday each year Enhanced maternity/paternity/adoption leave & pay Enhanced Pension Contribution Healthcare Insurance (including dental) Wellbeing support Life Insurance Income Protection Insurance Educational Sponsorship Electric Car Scheme Onsite electric car charging points Free secure parking Cycle to Work Scheme Informal dress code Paid breaks, with free premium hot drinks We re Innovative Trading for over 30 years here at Innovative Technology, where we now have offices on five continents and employ around 400 people, with over 170 based from our state-of-the-art R&D hub. From self-service checkouts to arcade machines, we provide our retail, banking, kiosk, vending, gaming and amusement customers with products and services that help them securely accept automated payments, with our industry-leading technology keeping us at the forefront of our sector. We also provide facial analysis technology for age estimation and control access for some of the world s leading companies. By being true to our values of Innovation, Collaboration, Respect and Drive we ve seen significant growth and won numerous domestic and international awards, whilst offering outstanding career opportunities and great benefits. You ll find us on the edge of the Pennines and less than half an hour from central Manchester, with modern offices, free parking and excellent transport links. We are a disability-confident employer, as such we will shortlist all candidates meeting our minimum criteria (as specified in the job description) who state they have a disability within their application. What s next? If you re a graduate wanting to become an Embedded Software Engineer and want to join our award-winning team working on the latest cutting-edge technology, we want to hear from you. A better way Through our people, drive and commitment we push boundaries to deliver innovative products and services. This is a two-part interview process, starting with a brief telephone screening followed by a formal site-based interview.
MERITUS are recruiting for a Systems Engineer in Nuclear Hardening to join a defence client of ours based in Portsmouth on an initial 6 month contract. SYSTEMS ENGINEER - NUCLEAR HARDENING - INSIDE IR35 - 80 PER HOUR - PORTSMOUTH, ONSITE - SC CLEARED (REQUIRED ON APPLICATION) - 6 MONTHS + LIKELY EXTENSION - SECTOR: DEFENCE MERITUS are recruiting for a Nuclear Hardening Systems Engineer to support a leading defence and communications programme focused on secure military ground infrastructure. This role will focus on the design, analysis, verification, and certification of ground-based communications and control system installations operating within highly regulated defence environments. You will work across the full system lifecycle, developing installation solutions that meet demanding operational, environmental, and compliance requirements. The position would suit candidates with experience in defence systems, electrical installation design, communications infrastructure, EMC/EMI engineering, systems integration, or military ground systems. Key Responsibilities Develop compliant installation designs for critical communications and control systems. Capture and analyse customer and stakeholder requirements. Define system architectures and installation solutions. Produce technical documentation, analysis reports, and compliance evidence. Develop verification, validation, and acceptance test plans. Assess installation environments and identify appropriate mitigation strategies. Conduct engineering trade studies and impact assessments. Manage system interfaces and integration activities. Support equipment selection, installation, testing, and customer acceptance. Liaise with customers, suppliers, and specialist test facilities to ensure technical compliance. Support engineering activities throughout the system lifecycle, from concept through to operational deployment. Essential Skills & Experience Experience designing or supporting electrical equipment installations within defence, aerospace, communications, or critical infrastructure environments. Knowledge of electrical systems, equipment racks, power distribution, cabling, grounding, and installation standards. Understanding of electromagnetic interference (EMI), electromagnetic compatibility (EMC), and mitigation techniques. Experience producing engineering documentation, test plans, and verification evidence. Systems engineering experience across requirements, design, integration, verification, and validation activities. Strong stakeholder management and technical communication skills. Desirable Skills & Experience Knowledge of Nuclear Hardening (NH), EMP protection, or resilient infrastructure standards. Experience within military communications, satellite communications, or secure network environments. Familiarity with military ground installations and associated engineering standards. Experience engaging with test houses, certification authorities, or defence customers. Security-cleared defence project experience. Qualifications Degree qualified in Electrical Engineering, Systems Engineering, Electronic Engineering, Communications Engineering, or a related discipline. Chartered Engineer status or working towards professional registration is desirable.
Jun 23, 2026
Contractor
MERITUS are recruiting for a Systems Engineer in Nuclear Hardening to join a defence client of ours based in Portsmouth on an initial 6 month contract. SYSTEMS ENGINEER - NUCLEAR HARDENING - INSIDE IR35 - 80 PER HOUR - PORTSMOUTH, ONSITE - SC CLEARED (REQUIRED ON APPLICATION) - 6 MONTHS + LIKELY EXTENSION - SECTOR: DEFENCE MERITUS are recruiting for a Nuclear Hardening Systems Engineer to support a leading defence and communications programme focused on secure military ground infrastructure. This role will focus on the design, analysis, verification, and certification of ground-based communications and control system installations operating within highly regulated defence environments. You will work across the full system lifecycle, developing installation solutions that meet demanding operational, environmental, and compliance requirements. The position would suit candidates with experience in defence systems, electrical installation design, communications infrastructure, EMC/EMI engineering, systems integration, or military ground systems. Key Responsibilities Develop compliant installation designs for critical communications and control systems. Capture and analyse customer and stakeholder requirements. Define system architectures and installation solutions. Produce technical documentation, analysis reports, and compliance evidence. Develop verification, validation, and acceptance test plans. Assess installation environments and identify appropriate mitigation strategies. Conduct engineering trade studies and impact assessments. Manage system interfaces and integration activities. Support equipment selection, installation, testing, and customer acceptance. Liaise with customers, suppliers, and specialist test facilities to ensure technical compliance. Support engineering activities throughout the system lifecycle, from concept through to operational deployment. Essential Skills & Experience Experience designing or supporting electrical equipment installations within defence, aerospace, communications, or critical infrastructure environments. Knowledge of electrical systems, equipment racks, power distribution, cabling, grounding, and installation standards. Understanding of electromagnetic interference (EMI), electromagnetic compatibility (EMC), and mitigation techniques. Experience producing engineering documentation, test plans, and verification evidence. Systems engineering experience across requirements, design, integration, verification, and validation activities. Strong stakeholder management and technical communication skills. Desirable Skills & Experience Knowledge of Nuclear Hardening (NH), EMP protection, or resilient infrastructure standards. Experience within military communications, satellite communications, or secure network environments. Familiarity with military ground installations and associated engineering standards. Experience engaging with test houses, certification authorities, or defence customers. Security-cleared defence project experience. Qualifications Degree qualified in Electrical Engineering, Systems Engineering, Electronic Engineering, Communications Engineering, or a related discipline. Chartered Engineer status or working towards professional registration is desirable.
Automation Engineer £38,000 + Company Vehicle Birmingham / Stoke-on-Trent Location: Birmingham / Stoke-on-Trent (Field Based) Salary: £38,000 OTE: Competitive basic salary plus overtime and on-call opportunities Industry: Automation Our client is a well-established provider of automated access solutions, delivering installation, maintenance, and repair services across both residential and commercial environments. Due to continued growth, they are seeking an experienced Automation Engineer to join their field-based team, supporting customers across the Midlands region. Benefits Automation Engineer • Competitive salary of £38,000 • Company vehicle provided • Permanent, full-time position with a Monday to Friday schedule • Overtime opportunities available for additional earnings • Participation in an on-call rota with extra earning potential • Stable workload across diverse projects • Ongoing training and professional development • Work with a respected and growing organisation Responsibilities Automation Engineer As an Automation Engineer, your role will include: • Diagnosing and resolving mechanical and electrical faults • Installing and commissioning automatic doors, gates, and barriers • Conducting site surveys and system inspections • Responding to reactive breakdowns and fault-finding callouts • Carrying out planned preventative maintenance and servicing • Completing accurate job reports and documentation • Maintaining high standards of health and safety compliance • Managing timesheets and service records efficiently • Participating in the on-call rota and supporting out-of-hours work when required Requirements Automation Engineer • ADSA or ADIA accreditation • Minimum of 3 years' experience working with automatic doors, gates, or barriers • Full UK manual driving licence • Strong fault-finding and problem-solving skills • Excellent communication and customer service abilities • High attention to detail and commitment to quality workmanship • Flexible approach to work and willingness to support operational requirements • Ability to work independently and manage workloads effectively Why Join? • Join a growing organisation that values its engineers and provides a supportive working environment • Benefit from a varied workload • Develop your technical expertise while working with a broad range of automated access systems Apply Now! If you're an experienced Automation Engineer based in or near Birmingham, Stoke-on-Trent, or the surrounding Midlands area, this is your chance to join a respected company offering real work-life balance, strong earning potential, and professional development. Successful candidates with the required experience will be contacted by a member of the recruitment team. Automation Service Engineer Automatic Door Engineer Gate Automation Engineer Barrier Engineer ADSA Engineer ADIA Engineer Service Engineer Field Service Engineer Installation Engineer Maintenance Engineer Fault Finding Reactive Maintenance Planned Preventative Maintenance Automatic Gates Automatic Doors Access Control Midlands Birmingham Stoke-on-Trent Electrical Engineer Mechanical Engineer Building Services Automated Access Systems.
Jun 23, 2026
Full time
Automation Engineer £38,000 + Company Vehicle Birmingham / Stoke-on-Trent Location: Birmingham / Stoke-on-Trent (Field Based) Salary: £38,000 OTE: Competitive basic salary plus overtime and on-call opportunities Industry: Automation Our client is a well-established provider of automated access solutions, delivering installation, maintenance, and repair services across both residential and commercial environments. Due to continued growth, they are seeking an experienced Automation Engineer to join their field-based team, supporting customers across the Midlands region. Benefits Automation Engineer • Competitive salary of £38,000 • Company vehicle provided • Permanent, full-time position with a Monday to Friday schedule • Overtime opportunities available for additional earnings • Participation in an on-call rota with extra earning potential • Stable workload across diverse projects • Ongoing training and professional development • Work with a respected and growing organisation Responsibilities Automation Engineer As an Automation Engineer, your role will include: • Diagnosing and resolving mechanical and electrical faults • Installing and commissioning automatic doors, gates, and barriers • Conducting site surveys and system inspections • Responding to reactive breakdowns and fault-finding callouts • Carrying out planned preventative maintenance and servicing • Completing accurate job reports and documentation • Maintaining high standards of health and safety compliance • Managing timesheets and service records efficiently • Participating in the on-call rota and supporting out-of-hours work when required Requirements Automation Engineer • ADSA or ADIA accreditation • Minimum of 3 years' experience working with automatic doors, gates, or barriers • Full UK manual driving licence • Strong fault-finding and problem-solving skills • Excellent communication and customer service abilities • High attention to detail and commitment to quality workmanship • Flexible approach to work and willingness to support operational requirements • Ability to work independently and manage workloads effectively Why Join? • Join a growing organisation that values its engineers and provides a supportive working environment • Benefit from a varied workload • Develop your technical expertise while working with a broad range of automated access systems Apply Now! If you're an experienced Automation Engineer based in or near Birmingham, Stoke-on-Trent, or the surrounding Midlands area, this is your chance to join a respected company offering real work-life balance, strong earning potential, and professional development. Successful candidates with the required experience will be contacted by a member of the recruitment team. Automation Service Engineer Automatic Door Engineer Gate Automation Engineer Barrier Engineer ADSA Engineer ADIA Engineer Service Engineer Field Service Engineer Installation Engineer Maintenance Engineer Fault Finding Reactive Maintenance Planned Preventative Maintenance Automatic Gates Automatic Doors Access Control Midlands Birmingham Stoke-on-Trent Electrical Engineer Mechanical Engineer Building Services Automated Access Systems.
Security Engineer 35,000 - 42,000 OTE + Full Benefits Package What's on Offer OBase salary up to 42,000 Regional coverage across Leicestershire 28 days holiday Private Pension Specialist Tools Provided, Company Vehicle, IT Equipment 1 in 7 call out rota (rare call outs) Health & wellbeing support Employee recognition programme The Role Service, maintain and install CCTV, intruder alarms and access control systems, with a little fire alarms. Deliver a high standard of customer service and build strong client relationships Manage your own workload across a regional patch Diagnose faults and carry out effective repairs Complete accurate service and compliance reports Identify system issues and recommend improvements Work to deadlines while maintaining quality standards Ensure full compliance with health & safety regulations Collaborate with internal teams to deliver efficient service Aim for first-time fixes wherever possible What We're Looking For Experience across both fire and security systems Relevant industry qualifications (FIA or equivalent advantageous) Strong fault-finding ability Comfortable with digital reporting systems Solid understanding of health & safety practices Good communication and customer-facing skills Self-motivated and organised approach Full UK driving licence Join a well-established and growing organisation delivering high-quality fire and security solutions across Leicestershire. This is a field-based role centred around Leicestershire, covering a regional patch, offering stability, strong earning potential, and a genuinely supportive environment. INDAV
Jun 23, 2026
Full time
Security Engineer 35,000 - 42,000 OTE + Full Benefits Package What's on Offer OBase salary up to 42,000 Regional coverage across Leicestershire 28 days holiday Private Pension Specialist Tools Provided, Company Vehicle, IT Equipment 1 in 7 call out rota (rare call outs) Health & wellbeing support Employee recognition programme The Role Service, maintain and install CCTV, intruder alarms and access control systems, with a little fire alarms. Deliver a high standard of customer service and build strong client relationships Manage your own workload across a regional patch Diagnose faults and carry out effective repairs Complete accurate service and compliance reports Identify system issues and recommend improvements Work to deadlines while maintaining quality standards Ensure full compliance with health & safety regulations Collaborate with internal teams to deliver efficient service Aim for first-time fixes wherever possible What We're Looking For Experience across both fire and security systems Relevant industry qualifications (FIA or equivalent advantageous) Strong fault-finding ability Comfortable with digital reporting systems Solid understanding of health & safety practices Good communication and customer-facing skills Self-motivated and organised approach Full UK driving licence Join a well-established and growing organisation delivering high-quality fire and security solutions across Leicestershire. This is a field-based role centred around Leicestershire, covering a regional patch, offering stability, strong earning potential, and a genuinely supportive environment. INDAV
Interaction Engineering Controls & Automation Engineer About the Role We are seeking a talented and motivated Controls & Automation Engineer to join a growing engineering team delivering advanced water treatment and process solutions for commercial and industrial clients. This role offers the opportunity to work on a variety of projects involving the design, programming, commissioning, and support of control and automation systems. The successful candidate will play a key role in delivering innovative, reliable, and efficient solutions from concept through to completion. Key Responsibilities Design and develop control systems for water treatment and process applications. Program and configure PLCs, HMIs, SCADA systems, and associated instrumentation. Commission and test automation systems on-site. Diagnose and resolve control system faults and performance issues. Produce electrical and control system documentation, including schematics and functional design specifications. Support project delivery throughout all project phases. Collaborate with customers, contractors, and internal teams to ensure successful project outcomes. Ensure compliance with industry standards, health and safety requirements, and company procedures. Provide technical support and training where required. Essential Requirements Degree, HNC, HND, or equivalent qualification in Electrical Engineering, Automation, Controls Engineering, or a related discipline. Experience programming and commissioning PLC systems (such as Siemens, Allen-Bradley, Mitsubishi, or Schneider). Experience with HMI and SCADA platforms. Strong understanding of electrical control panels, instrumentation, and industrial communication networks. Ability to read and interpret electrical drawings and technical documentation. Excellent problem-solving and analytical skills. Strong communication and organisational abilities. Full UK driving licence and willingness to travel to customer sites when required. Desirable Skills Experience within the water treatment, utilities, or process industries. Knowledge of telemetry and remote monitoring systems. Experience with variable speed drives and motor control systems. Familiarity with industrial networking protocols such as Modbus, Profibus, Profinet, or Ethernet/IP. Experience using AutoCAD Electrical or similar design software. What We Offer Competitive salary and benefits package. Company pension scheme. Ongoing training and professional development. Opportunities to work on varied and technically challenging projects. Clear career progression opportunities. Supportive and collaborative working environment. Apply Now If you are a driven Controls & Automation Engineer looking for your next challenge and the opportunity to contribute to innovative engineering projects, we would like to hear from you. Please submit your CV and a covering letter outlining your experience and suitability for the role. INDTE
Jun 23, 2026
Full time
Interaction Engineering Controls & Automation Engineer About the Role We are seeking a talented and motivated Controls & Automation Engineer to join a growing engineering team delivering advanced water treatment and process solutions for commercial and industrial clients. This role offers the opportunity to work on a variety of projects involving the design, programming, commissioning, and support of control and automation systems. The successful candidate will play a key role in delivering innovative, reliable, and efficient solutions from concept through to completion. Key Responsibilities Design and develop control systems for water treatment and process applications. Program and configure PLCs, HMIs, SCADA systems, and associated instrumentation. Commission and test automation systems on-site. Diagnose and resolve control system faults and performance issues. Produce electrical and control system documentation, including schematics and functional design specifications. Support project delivery throughout all project phases. Collaborate with customers, contractors, and internal teams to ensure successful project outcomes. Ensure compliance with industry standards, health and safety requirements, and company procedures. Provide technical support and training where required. Essential Requirements Degree, HNC, HND, or equivalent qualification in Electrical Engineering, Automation, Controls Engineering, or a related discipline. Experience programming and commissioning PLC systems (such as Siemens, Allen-Bradley, Mitsubishi, or Schneider). Experience with HMI and SCADA platforms. Strong understanding of electrical control panels, instrumentation, and industrial communication networks. Ability to read and interpret electrical drawings and technical documentation. Excellent problem-solving and analytical skills. Strong communication and organisational abilities. Full UK driving licence and willingness to travel to customer sites when required. Desirable Skills Experience within the water treatment, utilities, or process industries. Knowledge of telemetry and remote monitoring systems. Experience with variable speed drives and motor control systems. Familiarity with industrial networking protocols such as Modbus, Profibus, Profinet, or Ethernet/IP. Experience using AutoCAD Electrical or similar design software. What We Offer Competitive salary and benefits package. Company pension scheme. Ongoing training and professional development. Opportunities to work on varied and technically challenging projects. Clear career progression opportunities. Supportive and collaborative working environment. Apply Now If you are a driven Controls & Automation Engineer looking for your next challenge and the opportunity to contribute to innovative engineering projects, we would like to hear from you. Please submit your CV and a covering letter outlining your experience and suitability for the role. INDTE
Control Systems Engineer Colchester Up to 55,000 The company We're working with a well-established, specialist engineering business based in Colchester that designs and delivers safety-critical control systems for demanding sectors including rail, marine, and oil & gas,with projects spanning the UK and internationally. This is a genuinely interesting place to build a career: small enough that your work has real impact, experienced enough that the technical challenges are serious. The role As a Control Systems Engineer you'll be involved across the full project lifecycle, from initial design through to on-site commissioning, working on both new builds and upgrades to existing systems. Some UK and overseas travel is required for commissioning work, so a willingness to be away from home periodically is important. Developing detailed control system designs, wiring schematics, and layouts using AutoCAD Writing and developing PLC code, Allen Bradley Rockwell as a minimum Designing SCADA systems and HMIs Hardware and software design engineering Testing, validation, and commissioning of new systems (UK and overseas sites) Reviewing project specifications and developing functional design documentation Attending technical and design meetings with clients and stakeholders What we're looking for Proven experience in control systems design and implementation Strong PLC programming skills, Allen Bradley Rockwell essential Proficiency with SCADA, HMI, and related control system hardware/software AutoCAD experience is essential, evidence of this will be required Industrial communications knowledge (Profibus, Ethernet, DeviceNet) Degree in Control, Automation, or Electrical Engineering preferred Experience with safety-critical or SIL-rated systems is a strong advantage Rail industry knowledge is advantageous but not essential Willingness to travel within the UK and occasionally overseas What's on offer 25 days holiday + bank holidays Annual performance-based bonus Health & wellbeing programme Subsidised gym membership Team building events Pension scheme How to apply If you're a Control Systems Engineer based in or around Colchester and your background fits, we'd love to hear from you. Apply with your CV or get in touch for a confidential conversation with Mark
Jun 23, 2026
Full time
Control Systems Engineer Colchester Up to 55,000 The company We're working with a well-established, specialist engineering business based in Colchester that designs and delivers safety-critical control systems for demanding sectors including rail, marine, and oil & gas,with projects spanning the UK and internationally. This is a genuinely interesting place to build a career: small enough that your work has real impact, experienced enough that the technical challenges are serious. The role As a Control Systems Engineer you'll be involved across the full project lifecycle, from initial design through to on-site commissioning, working on both new builds and upgrades to existing systems. Some UK and overseas travel is required for commissioning work, so a willingness to be away from home periodically is important. Developing detailed control system designs, wiring schematics, and layouts using AutoCAD Writing and developing PLC code, Allen Bradley Rockwell as a minimum Designing SCADA systems and HMIs Hardware and software design engineering Testing, validation, and commissioning of new systems (UK and overseas sites) Reviewing project specifications and developing functional design documentation Attending technical and design meetings with clients and stakeholders What we're looking for Proven experience in control systems design and implementation Strong PLC programming skills, Allen Bradley Rockwell essential Proficiency with SCADA, HMI, and related control system hardware/software AutoCAD experience is essential, evidence of this will be required Industrial communications knowledge (Profibus, Ethernet, DeviceNet) Degree in Control, Automation, or Electrical Engineering preferred Experience with safety-critical or SIL-rated systems is a strong advantage Rail industry knowledge is advantageous but not essential Willingness to travel within the UK and occasionally overseas What's on offer 25 days holiday + bank holidays Annual performance-based bonus Health & wellbeing programme Subsidised gym membership Team building events Pension scheme How to apply If you're a Control Systems Engineer based in or around Colchester and your background fits, we'd love to hear from you. Apply with your CV or get in touch for a confidential conversation with Mark
Our client has an opportunity for a Systems Engineer to join them on a contract basis for 6 months. This team is responsible for the satellite communication solutions which include ground based installations of satellite control and communication equipment such as computer server systems, network infrastructure and transmission systems. The primary focus for this role at the Portsmouth site is for the design of equipment installations which are compliant with TEMPEST and EMC standards within the ground based MilSatcom domain. Role : Systems Engineer Location : Portsmouth - fully onsite Hours : 37 per week Hourly Rate : 70 per for via Umbrella, inside IR35 Clearance : SC required upon application. UK Eyes Only due to project What you'll be doing: The Engineer role involves; Identify boundary of the solution to be developed. Elicit and validate requirements for TEMPEST and EMC whilst considering the complete system lifecycle. Design and define possible architectures, in collaboration with IS/IT specialists, considering the functions and other requirements (constraints). Produce EMC/TEMPEST test plans Lead the engagement with test houses to fully define the approach Lead modelling using appropriate systems engineering techniques. Lead analysis (e.g., performance). Perform trade-off analysis in order to select the best solution fulfilling the requirements. Validate architecture. Define and manage interface requirements. Lead verification of the implementation and its interfaces. Lead operational and in-service evaluation. Lead impact analysis of any design change request during the entire product lifecycle. Identify the stakeholder for the solution to be developed and capture their needs and expectations. Requirements: We are looking for candidates with the following skills and experience: Be able to address the following aspects of TEMPEST/EMC compliant equipment installation: Familiarity with TEMPEST standards - preferable Knowledge of TEMPEST test specifications, test procedures, test setups, test data - preferable Familiarity with EMC standards - preferable Knowledge of EMC test specifications, test procedures, test setups, test data - preferable Customer EMC requirements analysis System level EMC design, development and solutions EMC Equipment selection Practical experience of installation of electrical equipment, including rack installation and compliant cabling practices - essential Understanding of the effects of electrical equipment (and cabling) interference, and methods for mitigating interference - essential Electrical safety certification Previous experience of generating test plans for sign off of electrical equipment installation, preferably with TEMPEST and/or EMC experience Verification, Validation & integration Transition to Operation Educated to at least Degree Level or equivalent in a recognised engineering discipline as recognised by the IET. The candidate should preferably hold a Chartered Engineer status and a member of the IET or other equivalent body. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jun 23, 2026
Contractor
Our client has an opportunity for a Systems Engineer to join them on a contract basis for 6 months. This team is responsible for the satellite communication solutions which include ground based installations of satellite control and communication equipment such as computer server systems, network infrastructure and transmission systems. The primary focus for this role at the Portsmouth site is for the design of equipment installations which are compliant with TEMPEST and EMC standards within the ground based MilSatcom domain. Role : Systems Engineer Location : Portsmouth - fully onsite Hours : 37 per week Hourly Rate : 70 per for via Umbrella, inside IR35 Clearance : SC required upon application. UK Eyes Only due to project What you'll be doing: The Engineer role involves; Identify boundary of the solution to be developed. Elicit and validate requirements for TEMPEST and EMC whilst considering the complete system lifecycle. Design and define possible architectures, in collaboration with IS/IT specialists, considering the functions and other requirements (constraints). Produce EMC/TEMPEST test plans Lead the engagement with test houses to fully define the approach Lead modelling using appropriate systems engineering techniques. Lead analysis (e.g., performance). Perform trade-off analysis in order to select the best solution fulfilling the requirements. Validate architecture. Define and manage interface requirements. Lead verification of the implementation and its interfaces. Lead operational and in-service evaluation. Lead impact analysis of any design change request during the entire product lifecycle. Identify the stakeholder for the solution to be developed and capture their needs and expectations. Requirements: We are looking for candidates with the following skills and experience: Be able to address the following aspects of TEMPEST/EMC compliant equipment installation: Familiarity with TEMPEST standards - preferable Knowledge of TEMPEST test specifications, test procedures, test setups, test data - preferable Familiarity with EMC standards - preferable Knowledge of EMC test specifications, test procedures, test setups, test data - preferable Customer EMC requirements analysis System level EMC design, development and solutions EMC Equipment selection Practical experience of installation of electrical equipment, including rack installation and compliant cabling practices - essential Understanding of the effects of electrical equipment (and cabling) interference, and methods for mitigating interference - essential Electrical safety certification Previous experience of generating test plans for sign off of electrical equipment installation, preferably with TEMPEST and/or EMC experience Verification, Validation & integration Transition to Operation Educated to at least Degree Level or equivalent in a recognised engineering discipline as recognised by the IET. The candidate should preferably hold a Chartered Engineer status and a member of the IET or other equivalent body. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Role : Software Location : Cheltenham Duration : 12 months Rate: 75/hour Inside IR35 : Umbrella Role Summary As a Software Engineer in the Displays Application team you will be responsible for the design and development of real-time embedded software within an integrated team environment, developing Aircraft Standby Display Systems. You will demonstrate independence & sound technical judgement to execute on assignments, identifying problems and formulating solutions. Essential Responsibilities Execute the requirements, design, implementation and verification of assigned software projects using sound engineering principles and adhering to business standards, practices, procedures and product / program requirements Document technical data generated by the assigned project consistent with engineering policies and procedures Provide timely communications on significant issues or developments Assure proper documentation of technical data is generated for the assigned projects and/or tasks consistent with engineering policies and procedures Qualifications / Requirements Degree from an accredited university or college or equivalent level of knowledge or experience Strong experience designing and implementing real-time embedded software Experience of software design lifecycle within Aerospace or similar controlled industry. Experience of RTCA DO-178B/C to high safety levels Development in C and target hardware Strong technical aptitude, including applicable engineering tools and systems Good oral and written communication skills Good problem solving and solution building skills Note This role requires UK nationality If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Jun 23, 2026
Contractor
Role : Software Location : Cheltenham Duration : 12 months Rate: 75/hour Inside IR35 : Umbrella Role Summary As a Software Engineer in the Displays Application team you will be responsible for the design and development of real-time embedded software within an integrated team environment, developing Aircraft Standby Display Systems. You will demonstrate independence & sound technical judgement to execute on assignments, identifying problems and formulating solutions. Essential Responsibilities Execute the requirements, design, implementation and verification of assigned software projects using sound engineering principles and adhering to business standards, practices, procedures and product / program requirements Document technical data generated by the assigned project consistent with engineering policies and procedures Provide timely communications on significant issues or developments Assure proper documentation of technical data is generated for the assigned projects and/or tasks consistent with engineering policies and procedures Qualifications / Requirements Degree from an accredited university or college or equivalent level of knowledge or experience Strong experience designing and implementing real-time embedded software Experience of software design lifecycle within Aerospace or similar controlled industry. Experience of RTCA DO-178B/C to high safety levels Development in C and target hardware Strong technical aptitude, including applicable engineering tools and systems Good oral and written communication skills Good problem solving and solution building skills Note This role requires UK nationality If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Role: Senior Business Analyst (Cyber Resilience & Operational Transformation) Sector: Utilities / Critical National Infrastructure (CNI) Location: UK (Hybrid) Purpose of the Role Lead the business analysis, requirement elicitation, and governance frameworks for critical cyber resilience and operational transformation initiatives. This position bridges corporate technology and site-based industrial systems to translate complex cyber security, data protection, and business continuity expectations into executable, delivery-ready technical specifications. Key Responsibilities Cyber Security & Regulatory Alignment: Drive Cyber Assessment Framework (CAF) aligned activities, executing control mapping, evidence collation, gap analysis, and compilation of robust regulatory Evidence Packs (EP) to satisfy NIS compliance. Resilience & Disaster Recovery (DR): Elicit and define comprehensive end-to-end Business Continuity and Disaster Recovery (BCDR) requirements, focusing on ransomware resilience, data recovery governance, and secure operational restoration. IT/OT Integration Assurance: Collaborate with cross-functional architecture and engineering teams to govern system onboarding (e.g., SIEM/SOC infrastructure monitoring) across both corporate enterprise and industrial Operational Technology (OT/SCADA) environments. Requirements Governance: Create procurement-grade business analysis artifacts, including functional/non-functional specifications, process maps (BPMN), and strict Requirements Traceability Matrices (RTM). Requirements Extensive experience operating as a Senior, Lead, or Principal Business Analyst within a utility, regulated energy network, or CNI environment. Deep domain fluency in cybersecurity, industrial data protection frameworks, and complex disaster recovery structures. Proven exposure mapping technical systems to regulatory frameworks (such as NIS regulations or NCSC guidelines). Randstad Technologies is acting as an Employment Business in relation to this vacancy.
Jun 23, 2026
Contractor
Role: Senior Business Analyst (Cyber Resilience & Operational Transformation) Sector: Utilities / Critical National Infrastructure (CNI) Location: UK (Hybrid) Purpose of the Role Lead the business analysis, requirement elicitation, and governance frameworks for critical cyber resilience and operational transformation initiatives. This position bridges corporate technology and site-based industrial systems to translate complex cyber security, data protection, and business continuity expectations into executable, delivery-ready technical specifications. Key Responsibilities Cyber Security & Regulatory Alignment: Drive Cyber Assessment Framework (CAF) aligned activities, executing control mapping, evidence collation, gap analysis, and compilation of robust regulatory Evidence Packs (EP) to satisfy NIS compliance. Resilience & Disaster Recovery (DR): Elicit and define comprehensive end-to-end Business Continuity and Disaster Recovery (BCDR) requirements, focusing on ransomware resilience, data recovery governance, and secure operational restoration. IT/OT Integration Assurance: Collaborate with cross-functional architecture and engineering teams to govern system onboarding (e.g., SIEM/SOC infrastructure monitoring) across both corporate enterprise and industrial Operational Technology (OT/SCADA) environments. Requirements Governance: Create procurement-grade business analysis artifacts, including functional/non-functional specifications, process maps (BPMN), and strict Requirements Traceability Matrices (RTM). Requirements Extensive experience operating as a Senior, Lead, or Principal Business Analyst within a utility, regulated energy network, or CNI environment. Deep domain fluency in cybersecurity, industrial data protection frameworks, and complex disaster recovery structures. Proven exposure mapping technical systems to regulatory frameworks (such as NIS regulations or NCSC guidelines). Randstad Technologies is acting as an Employment Business in relation to this vacancy.
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 23, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
An opportunity has arisen for an experienced Principal Protection & Control Engineer to join a leading engineering consultancy delivering major infrastructure and energy transition projects across the UK. You will join a specialist transmission and distribution engineering team working across high-voltage networks, renewable integration and complex utility infrastructure programmes. This role offers the chance to lead technical delivery while shaping protection and control strategies for critical national assets. The Role As a Principal P&C Engineer, you will take a lead role in the design, review and delivery of protection and control systems for high-voltage transmission projects up to 400kV. Key responsibilities include: Leading the design of transmission protection systems up to 400kV Reviewing internal and third-party protection and control designs Developing design estimates, deliverables lists and engineering programmes Providing technical leadership and mentoring to junior engineers Advising on protection design, system operation and design change impacts Ensuring compliance with CDM regulations and engineering standards Challenging and improving existing technical solutions and design approaches Managing delivery of project tasks to scope, time, cost and quality requirements Undertaking site visits and supporting construction and commissioning activities Identifying and managing technical, safety and project risks Acting as a key interface with clients, contractors, system operators and stakeholders Supporting coordination across multidisciplinary engineering teams About You You will likely bring: Strong background in power system protection design and application Experience working at transmission voltage levels up to 400kV (utility, consultancy or OEM environment) Proven experience producing protection and control design deliverables Ability to calculate relay settings and develop logic files Experience producing schematics and detailed P&C engineering drawings Knowledge of protection schemes including busbar, transformer, feeder, reactor and circuit breaker fail protection Understanding of SCADA interfaces and system integration Experience working with IEC 61850 communication protocols Familiarity with protection studies and coordination tools such as ASPEN, ETAP or DIgSILENT Strong understanding of substation secondary systems including panel design and cable schedules Experience working within multi-disciplinary engineering and delivery teams Strong communication skills with the ability to engage at senior stakeholder level Desirable Experience TP141, CDAE or LCDAE authorisation Chartered Engineer status HVDC and FACTS protection system experience SCADA system design (e.g. Zenon-Copa-Data) What's on Offer Opportunity to lead technical delivery on major UK transmission projects Significant influence over protection and control design standards and approaches Hybrid and flexible working arrangements Exposure to complex, high-value national infrastructure programmes Strong career progression within a specialist engineering environment This is a key opportunity for a senior protection engineer looking to take a leading role in shaping critical UK transmission infrastructure and supporting the energy transition. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Jun 23, 2026
Full time
An opportunity has arisen for an experienced Principal Protection & Control Engineer to join a leading engineering consultancy delivering major infrastructure and energy transition projects across the UK. You will join a specialist transmission and distribution engineering team working across high-voltage networks, renewable integration and complex utility infrastructure programmes. This role offers the chance to lead technical delivery while shaping protection and control strategies for critical national assets. The Role As a Principal P&C Engineer, you will take a lead role in the design, review and delivery of protection and control systems for high-voltage transmission projects up to 400kV. Key responsibilities include: Leading the design of transmission protection systems up to 400kV Reviewing internal and third-party protection and control designs Developing design estimates, deliverables lists and engineering programmes Providing technical leadership and mentoring to junior engineers Advising on protection design, system operation and design change impacts Ensuring compliance with CDM regulations and engineering standards Challenging and improving existing technical solutions and design approaches Managing delivery of project tasks to scope, time, cost and quality requirements Undertaking site visits and supporting construction and commissioning activities Identifying and managing technical, safety and project risks Acting as a key interface with clients, contractors, system operators and stakeholders Supporting coordination across multidisciplinary engineering teams About You You will likely bring: Strong background in power system protection design and application Experience working at transmission voltage levels up to 400kV (utility, consultancy or OEM environment) Proven experience producing protection and control design deliverables Ability to calculate relay settings and develop logic files Experience producing schematics and detailed P&C engineering drawings Knowledge of protection schemes including busbar, transformer, feeder, reactor and circuit breaker fail protection Understanding of SCADA interfaces and system integration Experience working with IEC 61850 communication protocols Familiarity with protection studies and coordination tools such as ASPEN, ETAP or DIgSILENT Strong understanding of substation secondary systems including panel design and cable schedules Experience working within multi-disciplinary engineering and delivery teams Strong communication skills with the ability to engage at senior stakeholder level Desirable Experience TP141, CDAE or LCDAE authorisation Chartered Engineer status HVDC and FACTS protection system experience SCADA system design (e.g. Zenon-Copa-Data) What's on Offer Opportunity to lead technical delivery on major UK transmission projects Significant influence over protection and control design standards and approaches Hybrid and flexible working arrangements Exposure to complex, high-value national infrastructure programmes Strong career progression within a specialist engineering environment This is a key opportunity for a senior protection engineer looking to take a leading role in shaping critical UK transmission infrastructure and supporting the energy transition. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Simpson Recruitment Services
West Bromwich, West Midlands
CNC Programmer Process Engineer Location: Birmingham, B71 Salary: £50,000 to £55,000 Shift Pattern: Days, Monday to Friday Our client is a well-established, privately owned engineering business and a key 1st and 2nd tier supplier to the automotive industry. With a strong heritage and multiple sites across the Midlands, they have built an enviable reputation for the batch manufacture of precision components, supplying several of the most recognisable OEMs across the automotive sector and beyond. The business is currently enjoying a sustained period of both organic and acquisitive growth, underpinned by significant investment in new machinery, systems and site infrastructure. It is a genuinely exciting time to come on board. As part of this expansion, they are now looking for a talented and motivated CNC Process Engineer to take ownership of efficiency and productivity within their CNC and traditional machine shop, which specialises in the machining of aluminium castings. This facility plays a central role in delivering components to demanding quality, cost and delivery standards, and the appointment of the right person will be pivotal to its continued success. The Role Working across the CNC machining facility, you will be genuinely hands-on with setting and programming, while also bringing a clear process engineering mindset to how the shop floor operates day to day. You will be expected to identify opportunities for improvement, refine methods, optimise cycle times, support the team, and ensure that the right component is produced right first time, every time. The work is varied and technically demanding. It will suit someone who enjoys getting the detail right, takes pride in their craft, and is always looking for ways to make things run a little better. Key Responsibilities Setting and programming across a range of CNC equipment. Reviewing and improving existing processes, methods and cycle times. Introducing best practice in tooling, fixturing and workholding. Supporting the production team with technical problem-solving on the shop floor. Working closely with quality, production and engineering colleagues to ensure components meet specification. Contributing to continuous improvement projects across the facility. Candidate Profile A solid CNC machining background, ideally as a setter-programmer. Proven programming experience on FANUC and Mazatrol controls. Strong setting knowledge across a range of CNC equipment. Ideally a background in industrial engineering, production engineering or work study. A methodical, improvement-minded approach with a genuine appetite for making things better. Why Join? This is an excellent opportunity to join a forward-thinking business at a real high point in its journey. Our client is committed to investing in its people as well as its plant, and offers a competitive salary of £50,000 to £55,000 alongside a stable, days-based working pattern. The role is Monday to Friday, days, although you may occasionally need to meet team members working on other shifts. For the right candidate, this is far more than just another engineering role. It offers a clear pathway towards senior management within a company that genuinely values technical expertise, professionalism and the drive to improve. How to Apply If this sounds like the next move for you, I would be delighted to hear from you. Please send your CV to Gary Simpson at Simpson Recruitment Services in the first instance, and we will arrange a confidential conversation to discuss the role in more detail. Take the next step in your career and play a part in the continued success of one of the Midlands' most respected engineering businesses.
Jun 23, 2026
Full time
CNC Programmer Process Engineer Location: Birmingham, B71 Salary: £50,000 to £55,000 Shift Pattern: Days, Monday to Friday Our client is a well-established, privately owned engineering business and a key 1st and 2nd tier supplier to the automotive industry. With a strong heritage and multiple sites across the Midlands, they have built an enviable reputation for the batch manufacture of precision components, supplying several of the most recognisable OEMs across the automotive sector and beyond. The business is currently enjoying a sustained period of both organic and acquisitive growth, underpinned by significant investment in new machinery, systems and site infrastructure. It is a genuinely exciting time to come on board. As part of this expansion, they are now looking for a talented and motivated CNC Process Engineer to take ownership of efficiency and productivity within their CNC and traditional machine shop, which specialises in the machining of aluminium castings. This facility plays a central role in delivering components to demanding quality, cost and delivery standards, and the appointment of the right person will be pivotal to its continued success. The Role Working across the CNC machining facility, you will be genuinely hands-on with setting and programming, while also bringing a clear process engineering mindset to how the shop floor operates day to day. You will be expected to identify opportunities for improvement, refine methods, optimise cycle times, support the team, and ensure that the right component is produced right first time, every time. The work is varied and technically demanding. It will suit someone who enjoys getting the detail right, takes pride in their craft, and is always looking for ways to make things run a little better. Key Responsibilities Setting and programming across a range of CNC equipment. Reviewing and improving existing processes, methods and cycle times. Introducing best practice in tooling, fixturing and workholding. Supporting the production team with technical problem-solving on the shop floor. Working closely with quality, production and engineering colleagues to ensure components meet specification. Contributing to continuous improvement projects across the facility. Candidate Profile A solid CNC machining background, ideally as a setter-programmer. Proven programming experience on FANUC and Mazatrol controls. Strong setting knowledge across a range of CNC equipment. Ideally a background in industrial engineering, production engineering or work study. A methodical, improvement-minded approach with a genuine appetite for making things better. Why Join? This is an excellent opportunity to join a forward-thinking business at a real high point in its journey. Our client is committed to investing in its people as well as its plant, and offers a competitive salary of £50,000 to £55,000 alongside a stable, days-based working pattern. The role is Monday to Friday, days, although you may occasionally need to meet team members working on other shifts. For the right candidate, this is far more than just another engineering role. It offers a clear pathway towards senior management within a company that genuinely values technical expertise, professionalism and the drive to improve. How to Apply If this sounds like the next move for you, I would be delighted to hear from you. Please send your CV to Gary Simpson at Simpson Recruitment Services in the first instance, and we will arrange a confidential conversation to discuss the role in more detail. Take the next step in your career and play a part in the continued success of one of the Midlands' most respected engineering businesses.
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 23, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
We are working with one of the largest international independent manufacturers of metallic aerospace detailed parts. Capabilities include Machining, Assembly, Inspection & Control, Integrated Logistics, Processing & Finishing, Sheet Metal & Fabrication, Speed Shop, Engineering. They are looking for a Group Technical Quality Engineer to add to the team. Group Technical Quality Engineer Permanent £50,000 per annum Monday - Thursday 07:30 - 16:00, Friday 07:30 - 12:30 Hybrid/Remote/Site Based Group Technical Quality Engineer Job Description Act as internal focal point of contact, and support the central quality teams (group) as well as sites, in an expert role for escalated technical questions, queries and issues (within the assigned scope) Support all sites with specialist knowledge on deployment of APQP deliverables, and support identification and deployment of APQP training to all group sites. Work closely with manufacturing engineering to continuously improve planning and inspection processes to share, embed and flow down best practices across the group Support activities within the group (and across the sites) to maintain NADCAP and (customer) process approvals, including supporting site teams with NADCAP preparation audits Conduct internal process audits to support identification of improvement areas Support with the effective implementation of corrective and continuous improvement actions Support all ToW and NPI projects in the area of expertise Support the inspection team with technical queries and standardised approach. Group Technical Quality Engineer Essential Experience/Skills/Qualifications Quality or Manufacturing Engineering Professional with extensive experience in a similar role Experience in deployment of APQP deliverables Working knowledge of international standards for quality management systems (AS9100, ISO9001) Highly proficient in reading, understanding and applying technical documentation such as drawings, technical specifications, standards etc. Experience in manufacturing processes for sheet metal and machined components, including surface treatment processes Proficient in developing and improving planning (routing) and supporting documentation. Experience in a highly regulated industry, preferably Aerospace Strong knowledge of problem analysis methodologies & working experience with ERP systems. Group Technical Quality Engineer Company Benefits Hybrid Working Company pension scheme 25 days annual leave + 8 statutory holidays, Christmas shutdown BUPA Healthcare Death in Service benefit If you feel you're a good fit for this position, please click 'apply'
Jun 23, 2026
Full time
We are working with one of the largest international independent manufacturers of metallic aerospace detailed parts. Capabilities include Machining, Assembly, Inspection & Control, Integrated Logistics, Processing & Finishing, Sheet Metal & Fabrication, Speed Shop, Engineering. They are looking for a Group Technical Quality Engineer to add to the team. Group Technical Quality Engineer Permanent £50,000 per annum Monday - Thursday 07:30 - 16:00, Friday 07:30 - 12:30 Hybrid/Remote/Site Based Group Technical Quality Engineer Job Description Act as internal focal point of contact, and support the central quality teams (group) as well as sites, in an expert role for escalated technical questions, queries and issues (within the assigned scope) Support all sites with specialist knowledge on deployment of APQP deliverables, and support identification and deployment of APQP training to all group sites. Work closely with manufacturing engineering to continuously improve planning and inspection processes to share, embed and flow down best practices across the group Support activities within the group (and across the sites) to maintain NADCAP and (customer) process approvals, including supporting site teams with NADCAP preparation audits Conduct internal process audits to support identification of improvement areas Support with the effective implementation of corrective and continuous improvement actions Support all ToW and NPI projects in the area of expertise Support the inspection team with technical queries and standardised approach. Group Technical Quality Engineer Essential Experience/Skills/Qualifications Quality or Manufacturing Engineering Professional with extensive experience in a similar role Experience in deployment of APQP deliverables Working knowledge of international standards for quality management systems (AS9100, ISO9001) Highly proficient in reading, understanding and applying technical documentation such as drawings, technical specifications, standards etc. Experience in manufacturing processes for sheet metal and machined components, including surface treatment processes Proficient in developing and improving planning (routing) and supporting documentation. Experience in a highly regulated industry, preferably Aerospace Strong knowledge of problem analysis methodologies & working experience with ERP systems. Group Technical Quality Engineer Company Benefits Hybrid Working Company pension scheme 25 days annual leave + 8 statutory holidays, Christmas shutdown BUPA Healthcare Death in Service benefit If you feel you're a good fit for this position, please click 'apply'
Buyer East Kent Hybrid Up to £41,000 DOE Full time Permanent A large, complex infrastructure organisation is seeking a Buyer to join them on a hybrid basis, this role we are looking for an experience candidate within procurement, purchasing or a project based role where you have worked within the engineering, infrastructure or construction industry! This is a technical role within a busy department. Key responsibilities include: Support purchasing activity across infrastructure, operational, facilities and other technical categories Help set up fair and compliant supplier engagement processes, ensuring strong standards around ethics, health & safety, and corporate responsibility Assist with end-to-end tender activity including supplier sourcing, timelines, documentation and pricing coordination Review and assess supplier submissions, checking commercial detail, cost structures and compliance with contractual/legal requirements Take part in clarification discussions with both suppliers and internal teams to resolve technical and commercial queries Support negotiation activity and contribute to supplier selection decisions and tender award recommendations Prepare, issue and help manage contracts through to completion and signature Monitor supplier delivery and performance, supporting contract variations, change control and issue resolution where required Track key commercial risks including guarantees, penalties and contractual obligations Provide regular updates and progress reporting to senior procurement stakeholders What we re looking for: Previous experience in purchasing, procurement, or a project-focused role within a technical environment Familiarity with SAP or other similar procurement/ERP systems Strong working knowledge of Microsoft Excel, including data handling and reporting Background in engineering, infrastructure, or construction would be highly advantageous Why apply? Unique chance to join a high-performing organisation in a technically fascinating environment Excellent salary and benefits package Hybrid working with strong flexibility A welcoming team culture that values collaboration, expertise and continuous improvement This is a fantastic opportunity for a detail-oriented and proactive standards professional ready to take the next step in their career. If you feel you meet the above criteria, apply today for immediate consideration. This role is being managed by Holly Ensoll and Chloe Wadhams , Recruitment Consultant for Pearson Whiffin Recruitment. Not the right role but still looking? Follow us on and
Jun 23, 2026
Full time
Buyer East Kent Hybrid Up to £41,000 DOE Full time Permanent A large, complex infrastructure organisation is seeking a Buyer to join them on a hybrid basis, this role we are looking for an experience candidate within procurement, purchasing or a project based role where you have worked within the engineering, infrastructure or construction industry! This is a technical role within a busy department. Key responsibilities include: Support purchasing activity across infrastructure, operational, facilities and other technical categories Help set up fair and compliant supplier engagement processes, ensuring strong standards around ethics, health & safety, and corporate responsibility Assist with end-to-end tender activity including supplier sourcing, timelines, documentation and pricing coordination Review and assess supplier submissions, checking commercial detail, cost structures and compliance with contractual/legal requirements Take part in clarification discussions with both suppliers and internal teams to resolve technical and commercial queries Support negotiation activity and contribute to supplier selection decisions and tender award recommendations Prepare, issue and help manage contracts through to completion and signature Monitor supplier delivery and performance, supporting contract variations, change control and issue resolution where required Track key commercial risks including guarantees, penalties and contractual obligations Provide regular updates and progress reporting to senior procurement stakeholders What we re looking for: Previous experience in purchasing, procurement, or a project-focused role within a technical environment Familiarity with SAP or other similar procurement/ERP systems Strong working knowledge of Microsoft Excel, including data handling and reporting Background in engineering, infrastructure, or construction would be highly advantageous Why apply? Unique chance to join a high-performing organisation in a technically fascinating environment Excellent salary and benefits package Hybrid working with strong flexibility A welcoming team culture that values collaboration, expertise and continuous improvement This is a fantastic opportunity for a detail-oriented and proactive standards professional ready to take the next step in their career. If you feel you meet the above criteria, apply today for immediate consideration. This role is being managed by Holly Ensoll and Chloe Wadhams , Recruitment Consultant for Pearson Whiffin Recruitment. Not the right role but still looking? Follow us on and
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 23, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Description About the Role The Generator Technician will play a key role in supporting NOV's Portable Power business, delivering high-quality service and technical expertise to our customers. Based in Great Yarmouth, this position involves hands-on work across installation, commissioning, servicing, and maintenance of generator systems and associated equipment. The majority of work will be UK-based, with occasional opportunities to support projects globally. Success in this role will depend on strong electrical expertise, a proactive approach to problem-solving, and the ability to work both independently and as part of a team in demanding environments, including offshore and wind farm sites. About the Company NOV delivers technology-driven solutions that support the global energy industry. We are known for innovation, quality, and reliability, supporting customers across drilling, completion, production, and industrial markets. Our Portable Power business provides critical power solutions to customers across Europe, supporting both traditional oil & gas and renewable energy sectors. What We Offer Diverse project exposure - primarily UK-based work with opportunities for international assignments Hands-on technical role - real impact on installations, commissioning, and servicing activities Exposure to both oil & gas and renewable (wind) environments Strong safety culture - clear procedures and high HSE standards Competitive compensation and benefits package (country-specific) Career development - opportunities to expand technical expertise across multiple systems and technologies Key Responsibilities Deliver installation, commissioning, servicing, and maintenance of generator systems and associated equipment Perform scheduled maintenance, repairs, and refurbishment in line with NOV procedures Conduct electrical completion checks, function tests, loop checks, and site acceptance tests Support factory acceptance testing (FAT) and P&ID walkdowns Provide after-sales support including inspections, technical advice, and spare parts recommendations Liaise with workshop teams, project teams, clients, and vendors Prepare and complete work orders and technical documentation Participate in on-call rota to provide responsive customer support Ensure all work is carried out safely and in compliance with HSE standards Travel to onshore and offshore sites, including physically demanding environments (e.g., climbing structures) Qualifications & Skills Essential: Strong electrical knowledge within installation, commissioning, servicing, and maintenance environments (including offshore) Ability to interpret and mark up engineering drawings Knowledge of relevant industry standards Willingness and ability to travel offshore and work in physically demanding environments Desirable: City & Guilds 2382-18 (18th Edition) City & Guilds HV Switching & System Control (0672) COMPEX certification Experience with diesel and gas-driven generators Experience with Cummins, Iveco, or Perkins engines Knowledge of Deep Sea control systems PLC programming skills Soft Skills Strong problem-solving mindset and ability to work under pressure Ability to work both independently and within a team Good communication skills with internal and external stakeholders High level of reliability, ownership, and safety awareness Flexibility and adaptability to dynamic environments Why Join Us? You'll join a global organisation where safety, quality, and innovation are at the core of everything we do. This role offers a unique opportunity to work in a technically challenging environment across both traditional and renewable energy sectors. Join our Global Family: We offer an inspiring place to work with opportunities to develop your skills and collaborate with experienced professionals across the industry. At NOV, you will be part of a culture that values teamwork, technical excellence, and continuous improvement. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Jun 23, 2026
Full time
Job Description About the Role The Generator Technician will play a key role in supporting NOV's Portable Power business, delivering high-quality service and technical expertise to our customers. Based in Great Yarmouth, this position involves hands-on work across installation, commissioning, servicing, and maintenance of generator systems and associated equipment. The majority of work will be UK-based, with occasional opportunities to support projects globally. Success in this role will depend on strong electrical expertise, a proactive approach to problem-solving, and the ability to work both independently and as part of a team in demanding environments, including offshore and wind farm sites. About the Company NOV delivers technology-driven solutions that support the global energy industry. We are known for innovation, quality, and reliability, supporting customers across drilling, completion, production, and industrial markets. Our Portable Power business provides critical power solutions to customers across Europe, supporting both traditional oil & gas and renewable energy sectors. What We Offer Diverse project exposure - primarily UK-based work with opportunities for international assignments Hands-on technical role - real impact on installations, commissioning, and servicing activities Exposure to both oil & gas and renewable (wind) environments Strong safety culture - clear procedures and high HSE standards Competitive compensation and benefits package (country-specific) Career development - opportunities to expand technical expertise across multiple systems and technologies Key Responsibilities Deliver installation, commissioning, servicing, and maintenance of generator systems and associated equipment Perform scheduled maintenance, repairs, and refurbishment in line with NOV procedures Conduct electrical completion checks, function tests, loop checks, and site acceptance tests Support factory acceptance testing (FAT) and P&ID walkdowns Provide after-sales support including inspections, technical advice, and spare parts recommendations Liaise with workshop teams, project teams, clients, and vendors Prepare and complete work orders and technical documentation Participate in on-call rota to provide responsive customer support Ensure all work is carried out safely and in compliance with HSE standards Travel to onshore and offshore sites, including physically demanding environments (e.g., climbing structures) Qualifications & Skills Essential: Strong electrical knowledge within installation, commissioning, servicing, and maintenance environments (including offshore) Ability to interpret and mark up engineering drawings Knowledge of relevant industry standards Willingness and ability to travel offshore and work in physically demanding environments Desirable: City & Guilds 2382-18 (18th Edition) City & Guilds HV Switching & System Control (0672) COMPEX certification Experience with diesel and gas-driven generators Experience with Cummins, Iveco, or Perkins engines Knowledge of Deep Sea control systems PLC programming skills Soft Skills Strong problem-solving mindset and ability to work under pressure Ability to work both independently and within a team Good communication skills with internal and external stakeholders High level of reliability, ownership, and safety awareness Flexibility and adaptability to dynamic environments Why Join Us? You'll join a global organisation where safety, quality, and innovation are at the core of everything we do. This role offers a unique opportunity to work in a technically challenging environment across both traditional and renewable energy sectors. Join our Global Family: We offer an inspiring place to work with opportunities to develop your skills and collaborate with experienced professionals across the industry. At NOV, you will be part of a culture that values teamwork, technical excellence, and continuous improvement. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 23, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
