The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Jul 31, 2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. Embedded Systems Engineer - AI Innovation Cwmbran, South Wales On Site - occasional opportunity for home working Skills: Artificial Intelligence, Machine Learning, Real-Time, Embedded development, Custom Models, Sensor Fusion, Automation, Edge AI, RTOS, Deep learning, LLM, ANN, C++, Electronics, Mechatronics, Robotics Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Engineering Innovation team as an Embedded Systems Engineer at our Cwmbran, South Wales site. Your Role As a key member of our Research & Technology team at Safran Seats, you'll use cutting-edge artificial intelligence to improve our products and processes - particularly by elevating passenger experience with intelligent edge-based systems in aircraft cabins. You'll collaborate with experts, partners, and innovators, using your hands-on technical skills to bring AI concepts from idea to real-world demonstration, all while helping build AI capabilities among colleagues. Key Responsibilities: Build deep technical and regulatory understanding of our cabin/seat electronic and data systems. Develop and test edge-AI solutions that enhance passenger experience and advance internal R&T workflows. Lead proof-of-concept trials and demonstrate the value of AI for real Safran products. Drive projects through our Technology Readiness Level process, ensuring compliance and maturity. Share AI knowledge across teams; be an in-house AI ambassador! Manage external collaborations with universities and technology partners. Maintain up-to-date project plans, budgets, and technical records. Represent Safran at industry conferences and technology events. What You'll Bring Degree (or equivalent experience) in Engineering, Computer Science, Data Science, Electronics, or similar (Essential) Proven experience designing, training, and deploying AI/ML models (deep learning/classical ML) on real-world problems (Essential) Hands-on skills integrating and deploying AI solutions on edge or resource-constrained platforms (MCUs, MPUs, GPUs, SoCs) (Essential) Programming proficiency: Python, C/C++, TensorFlow/PyTorch; version control (e.g., Git) (Essential) Innovative, practical, and communicative - comfortable explaining AI concepts and collaborating with a wide range of stakeholders (Essential) Proven experience in custom model generation with model optimisation to achieve performance targets within system constraints. (Essential) Embedded system development using RTOS, with experience in debugging and troubleshooting target hardware. (Desirable) Postgraduate qualification or formal training in AI/ML, data science, human-computer interaction or related specialism. (Desirable) At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation.
Jul 31, 2026
Full time
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. Embedded Systems Engineer - AI Innovation Cwmbran, South Wales On Site - occasional opportunity for home working Skills: Artificial Intelligence, Machine Learning, Real-Time, Embedded development, Custom Models, Sensor Fusion, Automation, Edge AI, RTOS, Deep learning, LLM, ANN, C++, Electronics, Mechatronics, Robotics Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Engineering Innovation team as an Embedded Systems Engineer at our Cwmbran, South Wales site. Your Role As a key member of our Research & Technology team at Safran Seats, you'll use cutting-edge artificial intelligence to improve our products and processes - particularly by elevating passenger experience with intelligent edge-based systems in aircraft cabins. You'll collaborate with experts, partners, and innovators, using your hands-on technical skills to bring AI concepts from idea to real-world demonstration, all while helping build AI capabilities among colleagues. Key Responsibilities: Build deep technical and regulatory understanding of our cabin/seat electronic and data systems. Develop and test edge-AI solutions that enhance passenger experience and advance internal R&T workflows. Lead proof-of-concept trials and demonstrate the value of AI for real Safran products. Drive projects through our Technology Readiness Level process, ensuring compliance and maturity. Share AI knowledge across teams; be an in-house AI ambassador! Manage external collaborations with universities and technology partners. Maintain up-to-date project plans, budgets, and technical records. Represent Safran at industry conferences and technology events. What You'll Bring Degree (or equivalent experience) in Engineering, Computer Science, Data Science, Electronics, or similar (Essential) Proven experience designing, training, and deploying AI/ML models (deep learning/classical ML) on real-world problems (Essential) Hands-on skills integrating and deploying AI solutions on edge or resource-constrained platforms (MCUs, MPUs, GPUs, SoCs) (Essential) Programming proficiency: Python, C/C++, TensorFlow/PyTorch; version control (e.g., Git) (Essential) Innovative, practical, and communicative - comfortable explaining AI concepts and collaborating with a wide range of stakeholders (Essential) Proven experience in custom model generation with model optimisation to achieve performance targets within system constraints. (Essential) Embedded system development using RTOS, with experience in debugging and troubleshooting target hardware. (Desirable) Postgraduate qualification or formal training in AI/ML, data science, human-computer interaction or related specialism. (Desirable) At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation.
Renishaw is seeking to recruit a Process Development Engineer to work within the New Products Integration (NPI) area of the Industrial Metrology Group (IMG). The role will focus on the design, development and introduction of innovative, capable and effective assembly processes to take products from prototypes into full production. Responsibilities Work closely with product design teams, developing strategies for the assembly of new products. Translate product design requirements into manufacturable processes. Design, develop and introduction of processes for the assembly and testing of new products. Prove build strategies and processes through pilot validation batches. Project managing the sourcing, supply and manufacture of the equipment and tooling required for the processes being developed. Ensuring new processes are safe, controlled, robust, capable and efficient. Utilising production control technology within the process where appropriate. Reporting the development and introduction of processes to enable product transfer to manufacturing sites. Key requirements Applicants are required to be educated to at least HNC level in Mechanical Engineering, Electrical Engineering, Systems Engineering, Production Engineering, Mechatronics or Automation Engineering; OR be able to demonstrate relevant experience. Experience in producing fully validated and documented assembly processes. Involvement in new product launches (on time, within cost, and to quality targets). Reduction of manufacturing risks through robust assembly process design. Continuous improvement in yield, FTPR, efficiency, and cost. Desirable requirements Previous experience and success in the development of precision assembly processes. Experience of DfA/DfM, Process FMEA or Six Sigma. Knowledge of production assembly techniques and their application to assembly processes. Person specification The successful candidate will have a strong technical background, ability and initiative to apply innovation to process design and development and a good aptitude for problem solving. This will be complimented by enthusiasm and commitment to deliver challenging projects against targets. The applicant will possess good interpersonal and organisational skills and will be capable of planning and managing their own time and projects to meet business targets and expectations. They will be an effective team member with keen attention to detail and excellent communication skills. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. ( not available at all sites). We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 times annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, Health Cash Plan, the option to join BUPA Renishaw Health Trust and an Employee Assistance Programme for employees and family.
Jul 31, 2026
Full time
Renishaw is seeking to recruit a Process Development Engineer to work within the New Products Integration (NPI) area of the Industrial Metrology Group (IMG). The role will focus on the design, development and introduction of innovative, capable and effective assembly processes to take products from prototypes into full production. Responsibilities Work closely with product design teams, developing strategies for the assembly of new products. Translate product design requirements into manufacturable processes. Design, develop and introduction of processes for the assembly and testing of new products. Prove build strategies and processes through pilot validation batches. Project managing the sourcing, supply and manufacture of the equipment and tooling required for the processes being developed. Ensuring new processes are safe, controlled, robust, capable and efficient. Utilising production control technology within the process where appropriate. Reporting the development and introduction of processes to enable product transfer to manufacturing sites. Key requirements Applicants are required to be educated to at least HNC level in Mechanical Engineering, Electrical Engineering, Systems Engineering, Production Engineering, Mechatronics or Automation Engineering; OR be able to demonstrate relevant experience. Experience in producing fully validated and documented assembly processes. Involvement in new product launches (on time, within cost, and to quality targets). Reduction of manufacturing risks through robust assembly process design. Continuous improvement in yield, FTPR, efficiency, and cost. Desirable requirements Previous experience and success in the development of precision assembly processes. Experience of DfA/DfM, Process FMEA or Six Sigma. Knowledge of production assembly techniques and their application to assembly processes. Person specification The successful candidate will have a strong technical background, ability and initiative to apply innovation to process design and development and a good aptitude for problem solving. This will be complimented by enthusiasm and commitment to deliver challenging projects against targets. The applicant will possess good interpersonal and organisational skills and will be capable of planning and managing their own time and projects to meet business targets and expectations. They will be an effective team member with keen attention to detail and excellent communication skills. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. ( not available at all sites). We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 times annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, Health Cash Plan, the option to join BUPA Renishaw Health Trust and an Employee Assistance Programme for employees and family.
Job Title: Electrical Design Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions. About the Role Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages) Select appropriate control, measurement, and electrical hardware based on customer requirements Produce electrical schematics, technical documentation, test plans, and commissioning documentation Build, test, troubleshoot, and commission electrical systems Support on-site installation and commissioning across customer sites Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions Participate in hardware design reviews and resolve technical issues across electrical and control systems Support supplier selection, component integration, and proof-of-concept activities Deliver projects on time, within budget, and to customer expectations About You Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline Experience designing electrical or control systems Proficient with EPLAN , AutoCAD Electrical , SolidWorks Electrical , or similar schematic design software Hands-on experience with electrical system build, testing, fault finding, and commissioning Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation Good understanding of EMC principles and practical electrical design Knowledge of CE/UKCA compliance and electrical design standards Strong problem-solving skills with the ability to work across multidisciplinary engineering teams Willingness to travel to customer sites across the UK (approximately 30-50%) Desirable Skills Functional safety or safety instrumented systems (e.g. IEC 61508) ATEX or hazardous area design experience Basic mechanical design for control panels and enclosures National Instruments (NI) hardware or software experience PLC programming or modification 18th Edition qualification Experience with safety PLCs or SISTEMA Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.
Jul 31, 2026
Full time
Job Title: Electrical Design Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions. About the Role Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages) Select appropriate control, measurement, and electrical hardware based on customer requirements Produce electrical schematics, technical documentation, test plans, and commissioning documentation Build, test, troubleshoot, and commission electrical systems Support on-site installation and commissioning across customer sites Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions Participate in hardware design reviews and resolve technical issues across electrical and control systems Support supplier selection, component integration, and proof-of-concept activities Deliver projects on time, within budget, and to customer expectations About You Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline Experience designing electrical or control systems Proficient with EPLAN , AutoCAD Electrical , SolidWorks Electrical , or similar schematic design software Hands-on experience with electrical system build, testing, fault finding, and commissioning Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation Good understanding of EMC principles and practical electrical design Knowledge of CE/UKCA compliance and electrical design standards Strong problem-solving skills with the ability to work across multidisciplinary engineering teams Willingness to travel to customer sites across the UK (approximately 30-50%) Desirable Skills Functional safety or safety instrumented systems (e.g. IEC 61508) ATEX or hazardous area design experience Basic mechanical design for control panels and enclosures National Instruments (NI) hardware or software experience PLC programming or modification 18th Edition qualification Experience with safety PLCs or SISTEMA Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.
Rubicon Consulting is currently recruiting for a Hardware Engineer on a 12 month contract based in Northern Ireland. Role Summary We are looking for a (contractor) motivated and experienced Hardware Engineer, reporting to the HW Functional Manager for Monitoring & Diagnostics (M&D), within Grid Automation (GA). The M&D product line is a class leading vendor of sensing devices and systems to Electrical Utilities and Industrial customers. The product line spans sensing of multiple asset types and has a broad portfolio of advanced technology, which aid customers to understand and optimize the operating condition of key assets such as HV/MV power transformers and circuit breakers. Troubleshooting complex electro-mechanical products. Delivering workable solutions and or product improvements. Collaborating with wider engineering team (hardware, software, firmware engineers) to ensure delivery of updates works seamlessly in the final product. Run small projects to deliver customer requests (internal and external). Support manufacturing engineers to improve yield. Designing test procedures, test fixtures etc. Redesign of PCBAs due to Obsolescence/Shortages. Ensure adherence to HW design, including all required reviews. Carry out additional duties as requested by the HW Functional Manager. Requirements: Degree or equivalent (HND with experience) in electrical/electronic or mechatronics engineering. Demonstrated experience of hardware/electronics design. Demonstrated fault finding capabilities. High level understanding of embedded software Ability to work independently and be self-motivated to deliver projects efficiently and on time. Must be organized and have methodical approach to problem solving. Strong oral and written communication skills, especially on technical matters. Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance and competitive advantage by choosing the right people first time!
Jul 31, 2026
Contractor
Rubicon Consulting is currently recruiting for a Hardware Engineer on a 12 month contract based in Northern Ireland. Role Summary We are looking for a (contractor) motivated and experienced Hardware Engineer, reporting to the HW Functional Manager for Monitoring & Diagnostics (M&D), within Grid Automation (GA). The M&D product line is a class leading vendor of sensing devices and systems to Electrical Utilities and Industrial customers. The product line spans sensing of multiple asset types and has a broad portfolio of advanced technology, which aid customers to understand and optimize the operating condition of key assets such as HV/MV power transformers and circuit breakers. Troubleshooting complex electro-mechanical products. Delivering workable solutions and or product improvements. Collaborating with wider engineering team (hardware, software, firmware engineers) to ensure delivery of updates works seamlessly in the final product. Run small projects to deliver customer requests (internal and external). Support manufacturing engineers to improve yield. Designing test procedures, test fixtures etc. Redesign of PCBAs due to Obsolescence/Shortages. Ensure adherence to HW design, including all required reviews. Carry out additional duties as requested by the HW Functional Manager. Requirements: Degree or equivalent (HND with experience) in electrical/electronic or mechatronics engineering. Demonstrated experience of hardware/electronics design. Demonstrated fault finding capabilities. High level understanding of embedded software Ability to work independently and be self-motivated to deliver projects efficiently and on time. Must be organized and have methodical approach to problem solving. Strong oral and written communication skills, especially on technical matters. Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance and competitive advantage by choosing the right people first time!
Westray Recruitment Consultants Ltd
Fenham, Newcastle Upon Tyne
WHAT IS IN IT FOR YOU? Permanent role full time Salary £32k pa circa Tyne & Wear location Monday to Friday 8:30am - 5pm 25 days holiday plus standard bank holidays Company pension scheme Performance-related bonus Ongoing training and career development with progression available Opportunity to work on a wide variety of industrial equipment Supportive team environment with experienced engineers Long-term career progression within a specialist engineering business Hands-on role where no two projects are the same THE BUSINESS Our client is a well-established engineering company specialising in the repair, refurbishment, and testing of industrial electronic and electrical equipment used across a range of sectors including manufacturing, energy, process industries, offshore operations, and heavy engineering. The business supports customers where equipment failures can lead to costly downtime, providing specialist repair solutions for both modern and obsolete systems. Their workshop handles a diverse range of equipment, from power electronics and motor control systems through to complex industrial control equipment. This is an excellent opportunity to join a growing technical team where practical problem-solving, engineering knowledge, and a willingness to learn are highly valued. THE ROLE Diagnose faults on industrial electronic assemblies and electrical systems down to component level Display good understanding on how components behave, how faults develop and how to read and reason from a diagram Use a range of diagnostic and test equipment to identify failures and root causes Carry out soldering and desoldering of both through-hole and surface-mount components Repair power supplies, motor drives, control systems, and industrial electronic equipment Test repaired equipment safely and effectively following established procedures Identify and replace faulty components including semiconductors, capacitors, relays, contactors, and associated circuitry Carry out fault-finding on electrical control systems and industrial automation equipment Work on a variety of legacy and unsupported equipment where technical documentation may be limited Maintain accurate repair records and technical documentation Support customer deadlines through efficient and high-quality repair work Follow workshop health, safety, and quality procedures at all times THE PERSON Qualification in Electronics, Electrical Engineering, Mechatronics, or a related discipline (HND, C&G, apprenticeship or equivalent) Strong understanding of electronic and electrical circuit theory principles Knowledge of SMPS, AC/DC drives, servo systems, PLC-related equipment, or industrial controls Ability to read and interpret circuit diagrams, PCB layouts and technical documentation Experience using oscilloscopes, multimeters, and other electronic test equipment Logical and methodical approach to fault diagnosis Practical hands-on attitude with excellent attention to detail Comfortable working on unfamiliar equipment and learning new technologies Good communication and documentation skills Able to work independently and as part of a team Keen to develop technical skills within an industrial repair environment Committed to delivering high standards of workmanship and quality TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Jul 31, 2026
Full time
WHAT IS IN IT FOR YOU? Permanent role full time Salary £32k pa circa Tyne & Wear location Monday to Friday 8:30am - 5pm 25 days holiday plus standard bank holidays Company pension scheme Performance-related bonus Ongoing training and career development with progression available Opportunity to work on a wide variety of industrial equipment Supportive team environment with experienced engineers Long-term career progression within a specialist engineering business Hands-on role where no two projects are the same THE BUSINESS Our client is a well-established engineering company specialising in the repair, refurbishment, and testing of industrial electronic and electrical equipment used across a range of sectors including manufacturing, energy, process industries, offshore operations, and heavy engineering. The business supports customers where equipment failures can lead to costly downtime, providing specialist repair solutions for both modern and obsolete systems. Their workshop handles a diverse range of equipment, from power electronics and motor control systems through to complex industrial control equipment. This is an excellent opportunity to join a growing technical team where practical problem-solving, engineering knowledge, and a willingness to learn are highly valued. THE ROLE Diagnose faults on industrial electronic assemblies and electrical systems down to component level Display good understanding on how components behave, how faults develop and how to read and reason from a diagram Use a range of diagnostic and test equipment to identify failures and root causes Carry out soldering and desoldering of both through-hole and surface-mount components Repair power supplies, motor drives, control systems, and industrial electronic equipment Test repaired equipment safely and effectively following established procedures Identify and replace faulty components including semiconductors, capacitors, relays, contactors, and associated circuitry Carry out fault-finding on electrical control systems and industrial automation equipment Work on a variety of legacy and unsupported equipment where technical documentation may be limited Maintain accurate repair records and technical documentation Support customer deadlines through efficient and high-quality repair work Follow workshop health, safety, and quality procedures at all times THE PERSON Qualification in Electronics, Electrical Engineering, Mechatronics, or a related discipline (HND, C&G, apprenticeship or equivalent) Strong understanding of electronic and electrical circuit theory principles Knowledge of SMPS, AC/DC drives, servo systems, PLC-related equipment, or industrial controls Ability to read and interpret circuit diagrams, PCB layouts and technical documentation Experience using oscilloscopes, multimeters, and other electronic test equipment Logical and methodical approach to fault diagnosis Practical hands-on attitude with excellent attention to detail Comfortable working on unfamiliar equipment and learning new technologies Good communication and documentation skills Able to work independently and as part of a team Keen to develop technical skills within an industrial repair environment Committed to delivering high standards of workmanship and quality TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Senior Optical Engineer Overview An innovative technology company developing advanced photonic and precision engineering solutions is seeking an experienced Senior Optical Engineer to join its growing engineering team. This role offers the opportunity to design, develop and integrate sophisticated optical systems for highly advanced scientific and engineering applications. Working within a multidisciplinary environment, you will collaborate with physicists and engineers across multiple disciplines to transform research concepts into robust, production-ready optical solutions. The position combines hands-on laboratory work with optical design, simulation and system integration, making it ideal for someone who enjoys solving complex technical challenges. Key Responsibilities Lead the development of advanced optical systems from concept through design, integration, testing and validation. Design free-space and fibre-optic systems, including laser distribution, beam delivery and imaging solutions. Perform optical modelling, optimisation and tolerance analysis using industry-standard simulation software. Assemble and precisely align optical components and complex laser systems. Develop structured verification plans and carry out performance testing using laboratory instrumentation. Produce technical documentation and communicate design decisions to project stakeholders. Lead technical design reviews and support continuous improvement activities. Collaborate with multidisciplinary engineering teams to deliver innovative products. Essential Requirements Master's degree (or equivalent experience) in Optical Engineering, Physics, Mechanical Engineering, Mechatronics or a related discipline. Minimum of five years' industrial experience in optical engineering. Strong understanding of free-space optics and fibre-optic system design. Experience designing and integrating complex optical assemblies. Hands-on experience aligning precision optical and laser systems. Excellent understanding of beam quality, aberration control and optical tolerancing. Experience using optical simulation software such as Zemax or equivalent. Familiarity with laboratory optical measurement equipment, including beam profilers, optical spectrum analysers, wavefront sensors, photodiodes and related instrumentation. Strong written and verbal communication skills. Desirable Experience Laser beam delivery and modulation. Imaging system design and camera selection. Beam stability relating to power, pointing, polarisation and phase. Photonic integrated circuits, micro-optics or advanced optical components. Mechanical integration and optical mounting tolerances. Experience using 3D CAD software such as SolidWorks. Previous experience working in multidisciplinary research and development environments. Working Environment The role is primarily laboratory and office based, involving hands-on optical assembly, testing and characterisation alongside computer-based design and analysis. Occasional lifting of laboratory equipment and optical hardware may be required. Equal Opportunities Our client is committed to creating an inclusive workplace where individuals from all backgrounds are encouraged to apply. Applications are welcomed based on skills, experience and potential, regardless of age, gender, ethnicity, disability, sexual orientation or any other protected characteristic
Jul 31, 2026
Full time
Senior Optical Engineer Overview An innovative technology company developing advanced photonic and precision engineering solutions is seeking an experienced Senior Optical Engineer to join its growing engineering team. This role offers the opportunity to design, develop and integrate sophisticated optical systems for highly advanced scientific and engineering applications. Working within a multidisciplinary environment, you will collaborate with physicists and engineers across multiple disciplines to transform research concepts into robust, production-ready optical solutions. The position combines hands-on laboratory work with optical design, simulation and system integration, making it ideal for someone who enjoys solving complex technical challenges. Key Responsibilities Lead the development of advanced optical systems from concept through design, integration, testing and validation. Design free-space and fibre-optic systems, including laser distribution, beam delivery and imaging solutions. Perform optical modelling, optimisation and tolerance analysis using industry-standard simulation software. Assemble and precisely align optical components and complex laser systems. Develop structured verification plans and carry out performance testing using laboratory instrumentation. Produce technical documentation and communicate design decisions to project stakeholders. Lead technical design reviews and support continuous improvement activities. Collaborate with multidisciplinary engineering teams to deliver innovative products. Essential Requirements Master's degree (or equivalent experience) in Optical Engineering, Physics, Mechanical Engineering, Mechatronics or a related discipline. Minimum of five years' industrial experience in optical engineering. Strong understanding of free-space optics and fibre-optic system design. Experience designing and integrating complex optical assemblies. Hands-on experience aligning precision optical and laser systems. Excellent understanding of beam quality, aberration control and optical tolerancing. Experience using optical simulation software such as Zemax or equivalent. Familiarity with laboratory optical measurement equipment, including beam profilers, optical spectrum analysers, wavefront sensors, photodiodes and related instrumentation. Strong written and verbal communication skills. Desirable Experience Laser beam delivery and modulation. Imaging system design and camera selection. Beam stability relating to power, pointing, polarisation and phase. Photonic integrated circuits, micro-optics or advanced optical components. Mechanical integration and optical mounting tolerances. Experience using 3D CAD software such as SolidWorks. Previous experience working in multidisciplinary research and development environments. Working Environment The role is primarily laboratory and office based, involving hands-on optical assembly, testing and characterisation alongside computer-based design and analysis. Occasional lifting of laboratory equipment and optical hardware may be required. Equal Opportunities Our client is committed to creating an inclusive workplace where individuals from all backgrounds are encouraged to apply. Applications are welcomed based on skills, experience and potential, regardless of age, gender, ethnicity, disability, sexual orientation or any other protected characteristic
Are you an experienced Multiskilled Engineer that prioritises your development and career progression? This opportunity offers a fantastic salary of 54,000 plus a 5% Bonus as well as premium overtime, and a market-leading 10% matched pension. This is a modern, fully equipped engineering site designed for high performance industrial scale manufacturing near Walbottle area of Newcastle. With accredited cross-skilling, continuous upskilling, and clear career progression pathways, this position delivers long-term stability, standout benefits, and exceptional earning potential. What's on offer as an Multiskilled Maintenance Engineer Basic Salary: 54,000 + bonus + premium overtime (x1.5, x2), OTE in excess of 65k per annum Training & Development: Commitment to a focused training and development programme, including mechanical cross-skilling for those who want it, leadership training and opportunities, specialist PLC training, continuous improvement training, etc. If it helps you progress as an engineer, they will support it where possible Pension matched up to 10% Private healthcare scheme Prime site location near Walbottle with excellent transport links 4 on 4 off working pattern - days/nights Role & Responsibilities as a Multiskilled Maintenance Engineer Deliver plant-wide proactive and reactive maintenance to ensure optimum factory performance Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team Fault-find and repair key electrical systems including PLCs, motors, drives, and control panels Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards What do you require to apply as a Multiskilled Maintenance Engineer City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in Engineering (Electrical & Mechanical) Apprenticeship trained in Electrical Engineering, Mechatronics, or related discipline, or experience as a Multi-Skilled Engineer Strong background in planned and reactive electrical maintenance within manufacturing To apply for the Multiskilled Engineering position, please click "Apply Now" and attach your most up to date CV.
Jul 31, 2026
Full time
Are you an experienced Multiskilled Engineer that prioritises your development and career progression? This opportunity offers a fantastic salary of 54,000 plus a 5% Bonus as well as premium overtime, and a market-leading 10% matched pension. This is a modern, fully equipped engineering site designed for high performance industrial scale manufacturing near Walbottle area of Newcastle. With accredited cross-skilling, continuous upskilling, and clear career progression pathways, this position delivers long-term stability, standout benefits, and exceptional earning potential. What's on offer as an Multiskilled Maintenance Engineer Basic Salary: 54,000 + bonus + premium overtime (x1.5, x2), OTE in excess of 65k per annum Training & Development: Commitment to a focused training and development programme, including mechanical cross-skilling for those who want it, leadership training and opportunities, specialist PLC training, continuous improvement training, etc. If it helps you progress as an engineer, they will support it where possible Pension matched up to 10% Private healthcare scheme Prime site location near Walbottle with excellent transport links 4 on 4 off working pattern - days/nights Role & Responsibilities as a Multiskilled Maintenance Engineer Deliver plant-wide proactive and reactive maintenance to ensure optimum factory performance Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team Fault-find and repair key electrical systems including PLCs, motors, drives, and control panels Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards What do you require to apply as a Multiskilled Maintenance Engineer City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in Engineering (Electrical & Mechanical) Apprenticeship trained in Electrical Engineering, Mechatronics, or related discipline, or experience as a Multi-Skilled Engineer Strong background in planned and reactive electrical maintenance within manufacturing To apply for the Multiskilled Engineering position, please click "Apply Now" and attach your most up to date CV.
Role: Robotics and Motion Control Engineer Location: Tewkesbury, 1-day WFH per week Salary: £55,000 - £70,000 Description of a Robotics and Motion Control Engineer As a result of continuing expansion, we are recruiting a robotics and motion control development engineer to join our team and help us designing and developing the next generation of our robotic and motion control systems. We have developed a complete industrial robotics solution with kinematic and dynamics algorithms, path and trajectory planning, and other advanced mathematical solutions. We design and test our own robotics scripting language and develop new commands and structures. Our Motion Coordinators are used internationally for industrial high-speed robotic and machine control, and incorporate advanced algorithms, software and electronics - including 64-bit multicore ARM processors and FPGA s. The role will involve: Leading and owning our robotic and motion control system development roadmap Engineering research and algorithm development The design, development, implementation and delivery of our robotic solutions Direct contact with customers and real applications, via our application development teams Skills Required as a Robotics and Motion Control Engineer Applicants must have a good degree, masters or PhD in Robotics, Mechatronics, Mathematics or strongly related discipline. They must be able to demonstrate a solid understanding of the principles behind industrial motion and robotic control, gained over at least 4 years of experience, ideally on industrial or high reliability projects. Experience with the following will be advantageous: Good understanding of kinematics and dynamics for industrial robots. Algorithm development MathWorks MATLAB High level programming languages; for example, C, Python, MATLAB / Simulink , ABB Rapid Experience with different industrial robots and systems Knowledge of interfacing automation hardware with electrical systems, sensors and actuators; and the basic principles of machine control Control systems Servo and stepper motors A broad personality and ability to communicate effectively in English is required. Applicants must be legally entitled to work in the UK. Benefits : Pivotal role in an engineering led company Work with the latest technology motion control Competitive salary, profit related pay, pension contribution and flexible working Occasional international travel Competitive salary Membership of Profit Related Pay (PRP) bonus scheme Matched personal pension contributions scheme of up to 5% Death in service insurance at 3x basic annual salary Access to an employee healthcare and well-being cash plan Access to an Employee Assistance Programme (EAP) and Remote GP services Remote/hybrid working option up to 25% of working time 25 days holiday per annum + your birthday 1 additional day holiday after 5 years and 10 years of service Robotics and Motion Control Engineer Robotics and Motion Control Engineer Robotics and Motion Control Engineer
Jul 31, 2026
Full time
Role: Robotics and Motion Control Engineer Location: Tewkesbury, 1-day WFH per week Salary: £55,000 - £70,000 Description of a Robotics and Motion Control Engineer As a result of continuing expansion, we are recruiting a robotics and motion control development engineer to join our team and help us designing and developing the next generation of our robotic and motion control systems. We have developed a complete industrial robotics solution with kinematic and dynamics algorithms, path and trajectory planning, and other advanced mathematical solutions. We design and test our own robotics scripting language and develop new commands and structures. Our Motion Coordinators are used internationally for industrial high-speed robotic and machine control, and incorporate advanced algorithms, software and electronics - including 64-bit multicore ARM processors and FPGA s. The role will involve: Leading and owning our robotic and motion control system development roadmap Engineering research and algorithm development The design, development, implementation and delivery of our robotic solutions Direct contact with customers and real applications, via our application development teams Skills Required as a Robotics and Motion Control Engineer Applicants must have a good degree, masters or PhD in Robotics, Mechatronics, Mathematics or strongly related discipline. They must be able to demonstrate a solid understanding of the principles behind industrial motion and robotic control, gained over at least 4 years of experience, ideally on industrial or high reliability projects. Experience with the following will be advantageous: Good understanding of kinematics and dynamics for industrial robots. Algorithm development MathWorks MATLAB High level programming languages; for example, C, Python, MATLAB / Simulink , ABB Rapid Experience with different industrial robots and systems Knowledge of interfacing automation hardware with electrical systems, sensors and actuators; and the basic principles of machine control Control systems Servo and stepper motors A broad personality and ability to communicate effectively in English is required. Applicants must be legally entitled to work in the UK. Benefits : Pivotal role in an engineering led company Work with the latest technology motion control Competitive salary, profit related pay, pension contribution and flexible working Occasional international travel Competitive salary Membership of Profit Related Pay (PRP) bonus scheme Matched personal pension contributions scheme of up to 5% Death in service insurance at 3x basic annual salary Access to an employee healthcare and well-being cash plan Access to an Employee Assistance Programme (EAP) and Remote GP services Remote/hybrid working option up to 25% of working time 25 days holiday per annum + your birthday 1 additional day holiday after 5 years and 10 years of service Robotics and Motion Control Engineer Robotics and Motion Control Engineer Robotics and Motion Control Engineer
Blighter Surveillance Services Ltd
Great Chesterford, Essex
Project Engineer About the role: Blighter Surveillance Systems is looking to recruit a Project Engineer to help deliver and develop Blighter radar systems and projects. Responsibilities of the role include; System-level design, architecture, and specification of systems and installations using Blighter Radars. Working with both our sales team and customers to establish and develop their requirements. Delivering customer demonstrations & training. Planning & overseeing radar test and development trials. Working with the support team to deliver completed solutions and systems. Supporting existing & future systems by working hands-on with Blighter radars as required. The role is based at our main office but will sometimes require visits to supplier and customer locations both in the UK (4-5 times/year) and overseas (2-3 times/year). The engineering team at Blighter is small and flexible. We are looking for someone capable of working on their own initiative, but who also appreciates the vital importance of collaborating and communicating effectively with other engineers and end users. In-depth knowledge of radars is not required - training on Blighter radars and systems will be provided, with many opportunities for hands-on experience. You will have the following skills and abilities: A demonstrable ability to design, develop, analyse, and think at a system level. Experience working with formal system requirements. An appreciation of multiple engineering disciplines. Experience in a customer-facing role. The ability to create and maintain system diagrams and documentation. Experience installing and configuring software on Windows-based computers. Computer networking (at intermediate level or above). A practical and hands-on approach. Excellent written and spoken communication skills. You will have the following background and experience: Degree-level education in an applicable engineering discipline, e.g.; o Electrical or Electronic Engineering o Software Engineering/Computer Science o Mechanical Engineering o Aerospace Engineering o Robotics/Mechatronics Engineering 2Y+ experience in security, defence, or other mixed-discipline high-tech industry The following skill & experience would be beneficial, but not required: Experience of radar systems. Industrial experience from an aerospace systems, sensors, or ISTAR/C4ISR/ESM domain. The ability to understand (and perhaps design) simple electronics. The ability to write simple software from scratch (e.g. python scripts) or amend or tweak more complex software Recent graduates who have completed a sandwich course, year in industry, or with other significant relevant working experience will also be considered. The requirement for occasional travel means that a driver s licence will be considered beneficial. About Blighter: BSS is a UK-based electronic-scanning radar and sensor solution provider delivering an integrated multi-sensor package to systems integrators comprising Blighter electronic-scanning radars, cameras, thermal imagers, trackers and software solutions. Blighter Surveillance Systems (BSS) is looking to increase its in-house design and development team in support of new product developments and enhancements. We are located 10 miles south of Cambridge in the semi-rural village of Great Chesterford, with ample parking, a railway station on the Liverpool St. Cambridge line and easy access to the M11.
Jul 31, 2026
Full time
Project Engineer About the role: Blighter Surveillance Systems is looking to recruit a Project Engineer to help deliver and develop Blighter radar systems and projects. Responsibilities of the role include; System-level design, architecture, and specification of systems and installations using Blighter Radars. Working with both our sales team and customers to establish and develop their requirements. Delivering customer demonstrations & training. Planning & overseeing radar test and development trials. Working with the support team to deliver completed solutions and systems. Supporting existing & future systems by working hands-on with Blighter radars as required. The role is based at our main office but will sometimes require visits to supplier and customer locations both in the UK (4-5 times/year) and overseas (2-3 times/year). The engineering team at Blighter is small and flexible. We are looking for someone capable of working on their own initiative, but who also appreciates the vital importance of collaborating and communicating effectively with other engineers and end users. In-depth knowledge of radars is not required - training on Blighter radars and systems will be provided, with many opportunities for hands-on experience. You will have the following skills and abilities: A demonstrable ability to design, develop, analyse, and think at a system level. Experience working with formal system requirements. An appreciation of multiple engineering disciplines. Experience in a customer-facing role. The ability to create and maintain system diagrams and documentation. Experience installing and configuring software on Windows-based computers. Computer networking (at intermediate level or above). A practical and hands-on approach. Excellent written and spoken communication skills. You will have the following background and experience: Degree-level education in an applicable engineering discipline, e.g.; o Electrical or Electronic Engineering o Software Engineering/Computer Science o Mechanical Engineering o Aerospace Engineering o Robotics/Mechatronics Engineering 2Y+ experience in security, defence, or other mixed-discipline high-tech industry The following skill & experience would be beneficial, but not required: Experience of radar systems. Industrial experience from an aerospace systems, sensors, or ISTAR/C4ISR/ESM domain. The ability to understand (and perhaps design) simple electronics. The ability to write simple software from scratch (e.g. python scripts) or amend or tweak more complex software Recent graduates who have completed a sandwich course, year in industry, or with other significant relevant working experience will also be considered. The requirement for occasional travel means that a driver s licence will be considered beneficial. About Blighter: BSS is a UK-based electronic-scanning radar and sensor solution provider delivering an integrated multi-sensor package to systems integrators comprising Blighter electronic-scanning radars, cameras, thermal imagers, trackers and software solutions. Blighter Surveillance Systems (BSS) is looking to increase its in-house design and development team in support of new product developments and enhancements. We are located 10 miles south of Cambridge in the semi-rural village of Great Chesterford, with ample parking, a railway station on the Liverpool St. Cambridge line and easy access to the M11.
Engineering technician - mechanical, mechatronics or electrical Advanced Biomedical Technology West London full time on site This is a rare opportunity to join a growing company at the forefront of advanced biomedical engineering. Are you an ONC/HNC (or higher) qualified technician/engineer with at least three years of practical experience? Do you enjoy solving problems, thinking independently, and making tangible improvements? Would you like to work for a cutting-edge biomedical company transforming healthcare? If so, this could be the opportunity for you. The Company An innovative West London based biomedical start-up, is designing and manufacturing advanced laboratory and clinical cell-manufacturing equipment. Their technology is revolutionising healthcare by automating the production of stem cells with minimal human intervention. Their systems integrate, mechanical assemblies, electrical systems, robotics/mechatronics, fluid control, and instrumentation technology The Role As an Engineering Technician, you will work across a broad range of activities including: Mechanical assembly of enclosures, structures, robotic components, small drives and actuators, senors and actuators, PCBAs, small looms, pipes and specialist consumable items. In house and client-based fault finding, rectification and diagnostics Supplier liaison Component-level testing and commissioning This is a hands-on, varied position within a highly technical and fast-moving environment. Full training and instruction will be given and previous medical or assembly experience is NOT essential What We re Looking For The bar is high but open to all backgrounds, even Selection is based on what you can demonstrate now. Essential Requirements: NVQ, ONC/D, HNC/D, in Mechanical, Mechatronics , electrical or Instrumentation Engineering. Good understanding of engineering principles Able to read and interpret engineering drawings inc some knowledge of BS8888, Minimum 3 years of practical engineering experience of technical assembly following instructions, drawings, schematics within mechanical, electromechanical, robotics, sensors, fluids or instrumentation. Experience of working in a regulated industry aerospace, avionics, defence, nuclear, motorsport, automotive or similar Demonstrated ability to apply original thought and affect change (not simply follow instructions) Strong structured thinking able to explain reasoning clearly (e.g. using 5 Whys problem-solving) Clear, concise and effective communication skills within a team-focused environment Right to work in UK indefinitely Commutable of west London or willing to relocate Desirable 5 years plus experience as a technician within an instrumentation, process control, medical devices, robotic or fluidic systems environment Ability to read simple electrical/fluid schematics and use hand tools soldering to IPC level manual/low volume machining light fabrication ISO EN 13485 We re looking for individuals with curiosity, structured thinking, and the confidence to improve procedures not just maintain them. Why Apply? Join a mission-driven biomedical company making a real difference to patients lives Working in west central London Work on advanced, multidisciplinary systems in a varied role Be part of a growing, innovative team Contribute meaningfully from day one How to Apply Please include a short covering paragraph within your CV explaining why you are suitable for this role and the key word TONTO (If you ve read this far this is essential.)
Jul 30, 2026
Full time
Engineering technician - mechanical, mechatronics or electrical Advanced Biomedical Technology West London full time on site This is a rare opportunity to join a growing company at the forefront of advanced biomedical engineering. Are you an ONC/HNC (or higher) qualified technician/engineer with at least three years of practical experience? Do you enjoy solving problems, thinking independently, and making tangible improvements? Would you like to work for a cutting-edge biomedical company transforming healthcare? If so, this could be the opportunity for you. The Company An innovative West London based biomedical start-up, is designing and manufacturing advanced laboratory and clinical cell-manufacturing equipment. Their technology is revolutionising healthcare by automating the production of stem cells with minimal human intervention. Their systems integrate, mechanical assemblies, electrical systems, robotics/mechatronics, fluid control, and instrumentation technology The Role As an Engineering Technician, you will work across a broad range of activities including: Mechanical assembly of enclosures, structures, robotic components, small drives and actuators, senors and actuators, PCBAs, small looms, pipes and specialist consumable items. In house and client-based fault finding, rectification and diagnostics Supplier liaison Component-level testing and commissioning This is a hands-on, varied position within a highly technical and fast-moving environment. Full training and instruction will be given and previous medical or assembly experience is NOT essential What We re Looking For The bar is high but open to all backgrounds, even Selection is based on what you can demonstrate now. Essential Requirements: NVQ, ONC/D, HNC/D, in Mechanical, Mechatronics , electrical or Instrumentation Engineering. Good understanding of engineering principles Able to read and interpret engineering drawings inc some knowledge of BS8888, Minimum 3 years of practical engineering experience of technical assembly following instructions, drawings, schematics within mechanical, electromechanical, robotics, sensors, fluids or instrumentation. Experience of working in a regulated industry aerospace, avionics, defence, nuclear, motorsport, automotive or similar Demonstrated ability to apply original thought and affect change (not simply follow instructions) Strong structured thinking able to explain reasoning clearly (e.g. using 5 Whys problem-solving) Clear, concise and effective communication skills within a team-focused environment Right to work in UK indefinitely Commutable of west London or willing to relocate Desirable 5 years plus experience as a technician within an instrumentation, process control, medical devices, robotic or fluidic systems environment Ability to read simple electrical/fluid schematics and use hand tools soldering to IPC level manual/low volume machining light fabrication ISO EN 13485 We re looking for individuals with curiosity, structured thinking, and the confidence to improve procedures not just maintain them. Why Apply? Join a mission-driven biomedical company making a real difference to patients lives Working in west central London Work on advanced, multidisciplinary systems in a varied role Be part of a growing, innovative team Contribute meaningfully from day one How to Apply Please include a short covering paragraph within your CV explaining why you are suitable for this role and the key word TONTO (If you ve read this far this is essential.)
Marcus Webb Associates Limited
Stubwood, Staffordshire
Principal EDS Engineer £60-75k + benefits Stoke-on-Trent area, Staffordshire - 5 days onsite This role is open to a senior engineer looking to progress or principal engineer, hence the broad salary range. The upper end would be principal. Background: Principal EDS Engineer This role involves technically leading a small team of electrical engineers working on the design and development of electrical distribution systems for complex agricultural machines / vehicles. In this role you will become the technical authority for a range of products, owning electrical schematic and harness design and delivery for the machines. You will mentor, lead and develop the team and contribute to next generation products, implementing new ideas and technologies. The ideal candidate will be a senior electrical design engineer or principal EDS engineer with excellent electrical engineering competence within electrical schematic and harness design of low voltage DC systems (e.g. 12v or 24v). In addition, team and project leading experience would be preferred. The company manufactures a range of complex, high value agricultural vehicles incorporating a broad array of electronic sensors, hydraulics, pneumatics, and intelligent capabilities. Candidates that have worked on the design of agricultural machinery design would be preferred, although other products can be considered. Skills / Experience required: Principal EDS Engineer A good degree in a relevant subject (e.g. electrical engineering, mechatronics engineering) At least 5 years of relevant experience in the design of electrical schematics and harnesses for low voltage DC systems (e.g. 12v, 24v) Experience in the design of electrical distribution systems for agricultural machines, construction machinery, automotive systems, or perhaps aerospace or other off-highway vehicles (e.g. military vehicles). Hands-on experience of 2D and 3D CAD for electrical schematic and harness design Experience of electrical architecture, electrical load calculations, and problem solving methods (8D, FMEA, etc) Experience of high reliability design taking into consideration water ingress, vibration, heat, impact, etc. Good communication skills and the ability to work effectively in a small team environment NOTE : Experience of designing low voltage DC systems for vehicles is essential. Ideally, this would be off-highway systems (see above). This role is not suited to engineers that do not have strong electrical schematic design experience or the ability to design from first principals. This senior / principal EDS engineer role is based onsite near Stoke-on-Trent. Hybrid working is not supported. It is commutable from Rocester, Rugeley, Crewe, Stafford, Birmingham, Uttoxeter, Lichfield, Macclesfield and Uttoxeter.
Jul 30, 2026
Full time
Principal EDS Engineer £60-75k + benefits Stoke-on-Trent area, Staffordshire - 5 days onsite This role is open to a senior engineer looking to progress or principal engineer, hence the broad salary range. The upper end would be principal. Background: Principal EDS Engineer This role involves technically leading a small team of electrical engineers working on the design and development of electrical distribution systems for complex agricultural machines / vehicles. In this role you will become the technical authority for a range of products, owning electrical schematic and harness design and delivery for the machines. You will mentor, lead and develop the team and contribute to next generation products, implementing new ideas and technologies. The ideal candidate will be a senior electrical design engineer or principal EDS engineer with excellent electrical engineering competence within electrical schematic and harness design of low voltage DC systems (e.g. 12v or 24v). In addition, team and project leading experience would be preferred. The company manufactures a range of complex, high value agricultural vehicles incorporating a broad array of electronic sensors, hydraulics, pneumatics, and intelligent capabilities. Candidates that have worked on the design of agricultural machinery design would be preferred, although other products can be considered. Skills / Experience required: Principal EDS Engineer A good degree in a relevant subject (e.g. electrical engineering, mechatronics engineering) At least 5 years of relevant experience in the design of electrical schematics and harnesses for low voltage DC systems (e.g. 12v, 24v) Experience in the design of electrical distribution systems for agricultural machines, construction machinery, automotive systems, or perhaps aerospace or other off-highway vehicles (e.g. military vehicles). Hands-on experience of 2D and 3D CAD for electrical schematic and harness design Experience of electrical architecture, electrical load calculations, and problem solving methods (8D, FMEA, etc) Experience of high reliability design taking into consideration water ingress, vibration, heat, impact, etc. Good communication skills and the ability to work effectively in a small team environment NOTE : Experience of designing low voltage DC systems for vehicles is essential. Ideally, this would be off-highway systems (see above). This role is not suited to engineers that do not have strong electrical schematic design experience or the ability to design from first principals. This senior / principal EDS engineer role is based onsite near Stoke-on-Trent. Hybrid working is not supported. It is commutable from Rocester, Rugeley, Crewe, Stafford, Birmingham, Uttoxeter, Lichfield, Macclesfield and Uttoxeter.
PLC Software Engineer Siemens TIA Portal Automated Warehousing Warwickshire £60-65k Samuel Frank is recruiting for a PLC Software Engineer to join a growing automation business delivering turnkey automated warehousing and material handling systems across the UK. This role will suit an Engineer with strong Siemens TIA Portal experience who enjoys seeing projects through from software development in the office to commissioning on customer sites. Based in the North of Warwickshire, you ll spend around 75% of your time developing PLC software in the office and 25% supporting installation and commissioning activities across customer sites in the Home Counties. Travel is project-based, with commissioning phases typically lasting between 4-6 weeks. Key aspects of the PLC Software Engineer role include; Developing PLC and HMI software using Siemens TIA Portal Designing structured PLC software using IEC (phone number removed), primarily Structured Text Working on full project lifecycle automation projects from initial software development through to commissioning and customer handover Commissioning and optimising multi-axis motion control systems Configuring and tuning servo drives and motor control systems Integrating industrial communication networks including Profinet, EtherCAT and OPC-UA Supporting the development of remote monitoring, diagnostics and IoT-enabled control solutions Assisting with the implementation and validation of machine safety systems to IEC 61508 and ISO 13849 standards Working closely with electrical design and mechanical engineering teams to deliver complete automation solutions Site travel will typically account for around 25% of your time, mainly across the Home Counties, with occasional commissioning phases lasting 4-6 weeks The successful PLC Software Engineer will have; Strong Siemens TIA Portal PLC programming experience - this is essential Experience developing PLC software using Structured Text Degree qualification in Electrical Engineering, Mechatronics, Automation or a similar engineering discipline would be advantageous Some Beckhoff PLC experience would be beneficial but isn t essential Experience of machine builders, OEMs, automated warehousing, logistics, conveyors or material handling systems would be highly desirable Good understanding of industrial communication networks such as Profinet and EtherCAT A willingness to travel within the UK during commissioning phases Strong communication skills and the ability to work directly with customers during project delivery The successful PLC Software Engineer will be joining a growing UK engineering team with an excellent pipeline of automation projects. You ll work on technically interesting machinery, gain exposure to the latest control technologies and play an important role delivering bespoke systems from concept through to successful commissioning. The role is commutable from Coventry, Hinckley, Tamworth, East and North Birmingham, Leicester and Rugby. If you re a PLC Software Engineer with strong Siemens TIA Portal experience who enjoys a mix of office-based software development and hands-on commissioning work, please apply today.
Jul 30, 2026
Full time
PLC Software Engineer Siemens TIA Portal Automated Warehousing Warwickshire £60-65k Samuel Frank is recruiting for a PLC Software Engineer to join a growing automation business delivering turnkey automated warehousing and material handling systems across the UK. This role will suit an Engineer with strong Siemens TIA Portal experience who enjoys seeing projects through from software development in the office to commissioning on customer sites. Based in the North of Warwickshire, you ll spend around 75% of your time developing PLC software in the office and 25% supporting installation and commissioning activities across customer sites in the Home Counties. Travel is project-based, with commissioning phases typically lasting between 4-6 weeks. Key aspects of the PLC Software Engineer role include; Developing PLC and HMI software using Siemens TIA Portal Designing structured PLC software using IEC (phone number removed), primarily Structured Text Working on full project lifecycle automation projects from initial software development through to commissioning and customer handover Commissioning and optimising multi-axis motion control systems Configuring and tuning servo drives and motor control systems Integrating industrial communication networks including Profinet, EtherCAT and OPC-UA Supporting the development of remote monitoring, diagnostics and IoT-enabled control solutions Assisting with the implementation and validation of machine safety systems to IEC 61508 and ISO 13849 standards Working closely with electrical design and mechanical engineering teams to deliver complete automation solutions Site travel will typically account for around 25% of your time, mainly across the Home Counties, with occasional commissioning phases lasting 4-6 weeks The successful PLC Software Engineer will have; Strong Siemens TIA Portal PLC programming experience - this is essential Experience developing PLC software using Structured Text Degree qualification in Electrical Engineering, Mechatronics, Automation or a similar engineering discipline would be advantageous Some Beckhoff PLC experience would be beneficial but isn t essential Experience of machine builders, OEMs, automated warehousing, logistics, conveyors or material handling systems would be highly desirable Good understanding of industrial communication networks such as Profinet and EtherCAT A willingness to travel within the UK during commissioning phases Strong communication skills and the ability to work directly with customers during project delivery The successful PLC Software Engineer will be joining a growing UK engineering team with an excellent pipeline of automation projects. You ll work on technically interesting machinery, gain exposure to the latest control technologies and play an important role delivering bespoke systems from concept through to successful commissioning. The role is commutable from Coventry, Hinckley, Tamworth, East and North Birmingham, Leicester and Rugby. If you re a PLC Software Engineer with strong Siemens TIA Portal experience who enjoys a mix of office-based software development and hands-on commissioning work, please apply today.
Onsite / Hybrid Start-up Unmanned Aircraft Programme No visa sponsorship is available. Applicants must already have the right to work in the UK. A fast-growing start-up is looking for a senior, hands-on engineer to lead the design, integration and troubleshooting of avionics and onboard systems for a flagship unmanned aircraft programme, plus future product and customer developments. You'll sit within a growing systems engineering function, working closely with senior engineering leadership, while staying heavily involved in practical integration across avionics, comms, power, autopilot and payload/ground interfaces. What you'll be doing Design, integrate and troubleshoot UAS avionics and onboard systems Define avionics architecture, interfaces, power distribution, wiring and communications requirements Support autopilot, telemetry, GNSS/INS, payload interfaces and ground-control integration Produce and maintain interface documents, wiring diagrams, configuration records and test evidence Support requirements capture, integration planning, ground test, SIL/HIL and flight test activities Identify and resolve integration risks and system-level issues Improve repeatability and maturity (documented, testable, supportable systems) and help productise integration approaches What we're looking for (essential) Strong background in UAS / aerospace / avionics / robotics / embedded systems / mechatronics Experience integrating avionics, communications, autopilots and/or payload interfaces Practical understanding of wiring, power and data interfaces, and HW/SW integration Confident fault-finding on complex integrated systems Test support experience (ground, field and/or flight test) Strong documentation and configuration-control habits Comfortable working hands-on in a small, fast-growing technical team Nice to have PX4, ArduPilot, Auterion (or similar) MAVLink, CAN, Ethernet, serial, GNSS/INS, telemetry, RF SIL/HIL testing exposure Aerospace/defence/robotics/autonomy background Awareness of safety/airworthiness/regulated test environments
Jul 30, 2026
Full time
Onsite / Hybrid Start-up Unmanned Aircraft Programme No visa sponsorship is available. Applicants must already have the right to work in the UK. A fast-growing start-up is looking for a senior, hands-on engineer to lead the design, integration and troubleshooting of avionics and onboard systems for a flagship unmanned aircraft programme, plus future product and customer developments. You'll sit within a growing systems engineering function, working closely with senior engineering leadership, while staying heavily involved in practical integration across avionics, comms, power, autopilot and payload/ground interfaces. What you'll be doing Design, integrate and troubleshoot UAS avionics and onboard systems Define avionics architecture, interfaces, power distribution, wiring and communications requirements Support autopilot, telemetry, GNSS/INS, payload interfaces and ground-control integration Produce and maintain interface documents, wiring diagrams, configuration records and test evidence Support requirements capture, integration planning, ground test, SIL/HIL and flight test activities Identify and resolve integration risks and system-level issues Improve repeatability and maturity (documented, testable, supportable systems) and help productise integration approaches What we're looking for (essential) Strong background in UAS / aerospace / avionics / robotics / embedded systems / mechatronics Experience integrating avionics, communications, autopilots and/or payload interfaces Practical understanding of wiring, power and data interfaces, and HW/SW integration Confident fault-finding on complex integrated systems Test support experience (ground, field and/or flight test) Strong documentation and configuration-control habits Comfortable working hands-on in a small, fast-growing technical team Nice to have PX4, ArduPilot, Auterion (or similar) MAVLink, CAN, Ethernet, serial, GNSS/INS, telemetry, RF SIL/HIL testing exposure Aerospace/defence/robotics/autonomy background Awareness of safety/airworthiness/regulated test environments
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. We are now entering a new and strategically significant phase of growth, characterised by the expansion of our systems to incorporate Land Border Surveillance Systems. Our new Sovereign Territory Surveillance (STS) Systems will play a crucial role in enhancing civil defence security through the deployment of advanced automated security infrastructures. Utilised by nations worldwide, these technologies facilitate the monitoring of sovereign land borders, thereby strengthening border integrity and national security. Mechanical Design and Integration Engineer - Mobile Surveillance Towers (Sovereign Territory Surveillance) We are seeking a highly motivated Mechanical Design and Integration Engineer - Mobile Surveillance Towers to own the design and development of mobile ruggedised surveillance tower systems deployed across marine and land border environments. You will own the full system design and integration package from concept generation through prototype development, testing, and production, delivering systems capable of operating in some of the harshest environments on earth. Working closely with other internal SRT teams such as Systems Engineering, Product Management and Project Engineering, you will develop mobile tower structures, sensor payload interfaces, and associated infrastructure that support advanced surveillance capabilities, including radar, EO/IR systems, communications equipment, and autonomous sensors. The ideal new colleague will be equally comfortable with the design of mechanical and electrical installations, CAD designs and engineering drawings, building and integrating prototypes, and troubleshooting in the field. Please note - the role of Mechanical Design and Integration Engineer - Mobile Surveillance Towers is a hybrid role, working both in our Bristol office, WFH and site visits to our global customers. Key Responsibilities - Mechanical Design and Integration Engineer - Mobile Surveillance Towers (not exhaustive): Own ruggedised mobile surveillance tower hardware design from concept generation through prototype development, qualification, and production realisation under demanding timelines Own the end-to-end engineering process, translating requirements into robust, manufacturable products from concept and design through testing, qualification, and production release Design and develop structural, mechanical, and electromechanical installations of sensors, mounts, enclosures, deployment mechanisms, and equipment interfaces Lead design reviews, perform engineering analysis, and define and execute verification and environmental test plans Design for operation in harsh environments, accounting for wind loading, vibration, corrosion, thermal effects, ingress protection, and long-term maintainability Build and evaluate prototypes of complex mechanical and electromechanical systems Coordinate with suppliers and manufacturing partners to transition successful concepts into production Investigate failures, perform root-cause analysis, and implement corrective actions Support internal testing, customer trials, and operational deployments Travel to suppliers, integration facilities, and remote test sites as required Requirements - Mechanical Design and Integration Engineer - Mobile Surveillance Towers (not exhaustive): Self-starter with extensive professional experience designing mechanical or electromechanical systems Proven experience delivering ruggedised hardware products from concept through production Strong understanding of system integration, mechanical design, electrical design, environmental loading, and system testing Proficiency in 3D CAD tools Ability to understand and produce high-quality engineering drawings Experience planning and executing testing and validation activities Comfortable working across multiple engineering disciplines in fast-paced development environments Strong analytical and problem-solving skills with a practical, hands-on approach to engineering challenges Highly Beneficial Qualifications and Experience Engineering degree in Electrical/Electronics, Mechanical, Mechatronics, Systems Engineering, or Product Design Engineering Experience designing equipment for defence, surveillance, telecommunications, aerospace, offshore, or other harsh-environment applications Experience integrating sensors, radar systems, EO/IR payloads, communications equipment, or power systems Benefits Package Excellent salary and package Private health care Career Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
Jul 30, 2026
Full time
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. We are now entering a new and strategically significant phase of growth, characterised by the expansion of our systems to incorporate Land Border Surveillance Systems. Our new Sovereign Territory Surveillance (STS) Systems will play a crucial role in enhancing civil defence security through the deployment of advanced automated security infrastructures. Utilised by nations worldwide, these technologies facilitate the monitoring of sovereign land borders, thereby strengthening border integrity and national security. Mechanical Design and Integration Engineer - Mobile Surveillance Towers (Sovereign Territory Surveillance) We are seeking a highly motivated Mechanical Design and Integration Engineer - Mobile Surveillance Towers to own the design and development of mobile ruggedised surveillance tower systems deployed across marine and land border environments. You will own the full system design and integration package from concept generation through prototype development, testing, and production, delivering systems capable of operating in some of the harshest environments on earth. Working closely with other internal SRT teams such as Systems Engineering, Product Management and Project Engineering, you will develop mobile tower structures, sensor payload interfaces, and associated infrastructure that support advanced surveillance capabilities, including radar, EO/IR systems, communications equipment, and autonomous sensors. The ideal new colleague will be equally comfortable with the design of mechanical and electrical installations, CAD designs and engineering drawings, building and integrating prototypes, and troubleshooting in the field. Please note - the role of Mechanical Design and Integration Engineer - Mobile Surveillance Towers is a hybrid role, working both in our Bristol office, WFH and site visits to our global customers. Key Responsibilities - Mechanical Design and Integration Engineer - Mobile Surveillance Towers (not exhaustive): Own ruggedised mobile surveillance tower hardware design from concept generation through prototype development, qualification, and production realisation under demanding timelines Own the end-to-end engineering process, translating requirements into robust, manufacturable products from concept and design through testing, qualification, and production release Design and develop structural, mechanical, and electromechanical installations of sensors, mounts, enclosures, deployment mechanisms, and equipment interfaces Lead design reviews, perform engineering analysis, and define and execute verification and environmental test plans Design for operation in harsh environments, accounting for wind loading, vibration, corrosion, thermal effects, ingress protection, and long-term maintainability Build and evaluate prototypes of complex mechanical and electromechanical systems Coordinate with suppliers and manufacturing partners to transition successful concepts into production Investigate failures, perform root-cause analysis, and implement corrective actions Support internal testing, customer trials, and operational deployments Travel to suppliers, integration facilities, and remote test sites as required Requirements - Mechanical Design and Integration Engineer - Mobile Surveillance Towers (not exhaustive): Self-starter with extensive professional experience designing mechanical or electromechanical systems Proven experience delivering ruggedised hardware products from concept through production Strong understanding of system integration, mechanical design, electrical design, environmental loading, and system testing Proficiency in 3D CAD tools Ability to understand and produce high-quality engineering drawings Experience planning and executing testing and validation activities Comfortable working across multiple engineering disciplines in fast-paced development environments Strong analytical and problem-solving skills with a practical, hands-on approach to engineering challenges Highly Beneficial Qualifications and Experience Engineering degree in Electrical/Electronics, Mechanical, Mechatronics, Systems Engineering, or Product Design Engineering Experience designing equipment for defence, surveillance, telecommunications, aerospace, offshore, or other harsh-environment applications Experience integrating sensors, radar systems, EO/IR payloads, communications equipment, or power systems Benefits Package Excellent salary and package Private health care Career Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machine issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day MHE and facilities maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or innovative tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Jul 29, 2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machine issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day MHE and facilities maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or innovative tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Simulation Systems Engineer Location: Hertfordshire Type: Full-time Permanent - Hybrid work available Important requirement: SC eligibility About the Role Matchtech are working closely with an innovative organisation within the defence and security sector, who are seeking a Simulation Systems Engineer to join a highly skilled Hardware-in-the-Loop (HWIL) team. This role offers the opportunity to work on advanced simulation technologies in a collaborative and supportive environment, contributing to cutting-edge engineering solutions. Key Responsibilities Maintain and optimise simulation environments, ensuring systems and control equipment remain operational and fit for purpose Support the upkeep of multi-axis hydraulic motion simulators and antenna positioning systems Carry out both planned preventative maintenance and reactive fault resolution Perform hands-on engineering tasks in a practical, workshop-based environment Interpret complex systems, applying engineering judgement to troubleshoot and improve performance Work flexibly across a range of technical challenges, developing broad, transferable skills Contribute ideas and improvements to enhance team performance and operational efficiency Skills & Experience Knowledge of hydraulic systems Ability to read and interpret mechanical and electrical engineering drawings Experience with CAD tools (CREO desirable) Practical workshop experience using hand and powered tools Strong coordination and manual dexterity for hands-on technical work Comfortable working at height when required Understanding of control systems theory Confident using IT systems, including Management Information Systems (MIS) Able to work independently while collaborating effectively within a team Qualifications Degree (2:1 or above preferred) in one of the following: Mechanical Engineering Mechatronics / Robotics Aeronautical Engineering Electronic Engineering (Equivalent experience will also be considered) What's on Offer Performance-related bonus (up to 2,500) Pension contributions up to 14% Paid overtime opportunities Flexible leave, including up to 15 additional days Flexible working arrangements Enhanced family leave (up to 26 weeks for maternity, adoption, and shared parental leave) On-site facilities including subsidised meals and free parking Inclusive Recruitment Statement Our client is committed to building an inclusive and diverse workforce. Applications are welcomed from individuals of all backgrounds, experiences, and perspectives. Selection decisions are based on skills, qualifications, and experience relevant to the role. Apply If you are motivated by complex engineering challenges and want to develop your career within an innovative simulation environment, we encourage you to apply. Join a team where your expertise will help shape advanced defence technologies.
Jul 29, 2026
Full time
Simulation Systems Engineer Location: Hertfordshire Type: Full-time Permanent - Hybrid work available Important requirement: SC eligibility About the Role Matchtech are working closely with an innovative organisation within the defence and security sector, who are seeking a Simulation Systems Engineer to join a highly skilled Hardware-in-the-Loop (HWIL) team. This role offers the opportunity to work on advanced simulation technologies in a collaborative and supportive environment, contributing to cutting-edge engineering solutions. Key Responsibilities Maintain and optimise simulation environments, ensuring systems and control equipment remain operational and fit for purpose Support the upkeep of multi-axis hydraulic motion simulators and antenna positioning systems Carry out both planned preventative maintenance and reactive fault resolution Perform hands-on engineering tasks in a practical, workshop-based environment Interpret complex systems, applying engineering judgement to troubleshoot and improve performance Work flexibly across a range of technical challenges, developing broad, transferable skills Contribute ideas and improvements to enhance team performance and operational efficiency Skills & Experience Knowledge of hydraulic systems Ability to read and interpret mechanical and electrical engineering drawings Experience with CAD tools (CREO desirable) Practical workshop experience using hand and powered tools Strong coordination and manual dexterity for hands-on technical work Comfortable working at height when required Understanding of control systems theory Confident using IT systems, including Management Information Systems (MIS) Able to work independently while collaborating effectively within a team Qualifications Degree (2:1 or above preferred) in one of the following: Mechanical Engineering Mechatronics / Robotics Aeronautical Engineering Electronic Engineering (Equivalent experience will also be considered) What's on Offer Performance-related bonus (up to 2,500) Pension contributions up to 14% Paid overtime opportunities Flexible leave, including up to 15 additional days Flexible working arrangements Enhanced family leave (up to 26 weeks for maternity, adoption, and shared parental leave) On-site facilities including subsidised meals and free parking Inclusive Recruitment Statement Our client is committed to building an inclusive and diverse workforce. Applications are welcomed from individuals of all backgrounds, experiences, and perspectives. Selection decisions are based on skills, qualifications, and experience relevant to the role. Apply If you are motivated by complex engineering challenges and want to develop your career within an innovative simulation environment, we encourage you to apply. Join a team where your expertise will help shape advanced defence technologies.
Blue Arrow is urgently recruiting for A Lead Diagnostics & Electrical Systems Engineer to join our clients growing Automotive Manufacturing team based in the Llanelli area. Contract : Permanent Salary : 45,000pa Hours of work : Full time: Monday - Thursday 08.30-17.00/ Friday 09.00-15.00 Role Purpose: The Lead Diagnostics & Electrical Systems Engineer is responsible for leading the development, release and delivery of automotive diagnostic solutions, retailer diagnostic tooling and vehicle electrical systems engineering activities across premium automotive and electrified vehicle programmes. The role acts as the primary technical interface between customers, suppliers, business development teams and internal engineering functions, ensuring projects are delivered to agreed quality, timing and budget objectives. This is a hands-on technical leadership position combining engineering excellence, customer engagement, commercial support and team mentoring. Key Responsibilities: Lead automotive diagnostic development, validation, release and maintenance activities. Define diagnostic strategies and technical solutions for customer programmes. Lead design, development, production and support of retailer diagnostic tooling. Provide specialist expertise in vehicle electrical and electronic systems. Support EV and HV investigations, testing, validation and issue resolution. Conduct root cause analysis and implement corrective actions. Analyse vehicle, warranty and diagnostic data to identify improvement opportunities. Act as primary technical customer contact throughout programme lifecycle. Lead customer workshops, technical reviews and progress meetings. Manage project timing, cost, scope, risks and deliverables. Prepare and present technical reports to customers and senior stakeholders. Support quotation development, statements of work and technical proposals. Identify opportunities for new business and revenue growth. Mentor engineers and technicians and promote engineering best practice. Support resource planning and technical governance. Manage suppliers and external technical partners. Essential Experience: 8-12+ years within automotive engineering Proven automotive diagnostics development experience OEM, retailer or Tier 1 experience Retailer/dealer diagnostic tooling experience Strong vehicle electrical systems knowledge Customer-facing technical leadership. Project delivery from concept through release. Supplier and stakeholder management. Quotation and solution development experience. Essential Technical Knowledge: UDS, ODX, OTX and DoIP. CAN, CAN FD, LIN and Automotive Ethernet. Vehicle electrical and electronic architectures. Diagnostic development and release processes. Electrical fault finding and root cause analysis. Retailer diagnostic tooling and service environments. EV and electrified vehicle systems. Technical reporting and presentation skills. Qualifications: Degree in Automotive Engineering, Electrical Engineering, Electronic Engineering, Mechatronics or related discipline. Full UK Driving License. Willingness to travel within the UK and internationally occasionally. Preferred Experience: High Voltage qualification or authorisation (training can be provided). Premium automotive OEM experience. Hybrid and Battery Electric Vehicle programmes. Vector CANoe, CANalyzer, ETAS INCA or equivalent toolsets. Six Sigma, DMAIC or structured problem-solving methodologies. Practical vehicle testing and validation experience. If you feel you are the right candidate for this role then please submit your CV for immediate response. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.
Jul 29, 2026
Full time
Blue Arrow is urgently recruiting for A Lead Diagnostics & Electrical Systems Engineer to join our clients growing Automotive Manufacturing team based in the Llanelli area. Contract : Permanent Salary : 45,000pa Hours of work : Full time: Monday - Thursday 08.30-17.00/ Friday 09.00-15.00 Role Purpose: The Lead Diagnostics & Electrical Systems Engineer is responsible for leading the development, release and delivery of automotive diagnostic solutions, retailer diagnostic tooling and vehicle electrical systems engineering activities across premium automotive and electrified vehicle programmes. The role acts as the primary technical interface between customers, suppliers, business development teams and internal engineering functions, ensuring projects are delivered to agreed quality, timing and budget objectives. This is a hands-on technical leadership position combining engineering excellence, customer engagement, commercial support and team mentoring. Key Responsibilities: Lead automotive diagnostic development, validation, release and maintenance activities. Define diagnostic strategies and technical solutions for customer programmes. Lead design, development, production and support of retailer diagnostic tooling. Provide specialist expertise in vehicle electrical and electronic systems. Support EV and HV investigations, testing, validation and issue resolution. Conduct root cause analysis and implement corrective actions. Analyse vehicle, warranty and diagnostic data to identify improvement opportunities. Act as primary technical customer contact throughout programme lifecycle. Lead customer workshops, technical reviews and progress meetings. Manage project timing, cost, scope, risks and deliverables. Prepare and present technical reports to customers and senior stakeholders. Support quotation development, statements of work and technical proposals. Identify opportunities for new business and revenue growth. Mentor engineers and technicians and promote engineering best practice. Support resource planning and technical governance. Manage suppliers and external technical partners. Essential Experience: 8-12+ years within automotive engineering Proven automotive diagnostics development experience OEM, retailer or Tier 1 experience Retailer/dealer diagnostic tooling experience Strong vehicle electrical systems knowledge Customer-facing technical leadership. Project delivery from concept through release. Supplier and stakeholder management. Quotation and solution development experience. Essential Technical Knowledge: UDS, ODX, OTX and DoIP. CAN, CAN FD, LIN and Automotive Ethernet. Vehicle electrical and electronic architectures. Diagnostic development and release processes. Electrical fault finding and root cause analysis. Retailer diagnostic tooling and service environments. EV and electrified vehicle systems. Technical reporting and presentation skills. Qualifications: Degree in Automotive Engineering, Electrical Engineering, Electronic Engineering, Mechatronics or related discipline. Full UK Driving License. Willingness to travel within the UK and internationally occasionally. Preferred Experience: High Voltage qualification or authorisation (training can be provided). Premium automotive OEM experience. Hybrid and Battery Electric Vehicle programmes. Vector CANoe, CANalyzer, ETAS INCA or equivalent toolsets. Six Sigma, DMAIC or structured problem-solving methodologies. Practical vehicle testing and validation experience. If you feel you are the right candidate for this role then please submit your CV for immediate response. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.
CNC Service Engineer Days 39,500 (OTE - 50,000) Are you a hands-on problem solver who loves working with cutting-edge technology? We're looking for a Field Service Engineer to join our clients growing team, supporting customers across the UK with the installation, service, and repair of advanced CNC pressbrakes and laser machines. What's in it for you? Full training provided - no prior CNC or laser experience required Competitive salary with overtime and bonus opportunities Company vehicle, laptop, and phone Ongoing career development and manufacturer training Be part of a friendly, supportive, and highly skilled team The role: Install, maintain, and service CNC pressbrakes and laser cutting machinery Diagnose and resolve mechanical, electrical, and software issues Deliver excellent customer support on-site Work independently in the field while being backed up by our expert team What we're looking for: Engineering background (mechanical, electrical, or mechatronics preferred) Strong problem-solving skills and a practical mindset Willingness to travel and work independently Full UK driving licence Enthusiasm to learn - full training is given If you are interested, please call Callum on (phone number removed) or e-mail
Jul 29, 2026
Full time
CNC Service Engineer Days 39,500 (OTE - 50,000) Are you a hands-on problem solver who loves working with cutting-edge technology? We're looking for a Field Service Engineer to join our clients growing team, supporting customers across the UK with the installation, service, and repair of advanced CNC pressbrakes and laser machines. What's in it for you? Full training provided - no prior CNC or laser experience required Competitive salary with overtime and bonus opportunities Company vehicle, laptop, and phone Ongoing career development and manufacturer training Be part of a friendly, supportive, and highly skilled team The role: Install, maintain, and service CNC pressbrakes and laser cutting machinery Diagnose and resolve mechanical, electrical, and software issues Deliver excellent customer support on-site Work independently in the field while being backed up by our expert team What we're looking for: Engineering background (mechanical, electrical, or mechatronics preferred) Strong problem-solving skills and a practical mindset Willingness to travel and work independently Full UK driving licence Enthusiasm to learn - full training is given If you are interested, please call Callum on (phone number removed) or e-mail
Job Title: Systems Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're partnering with a growing specialist engineering company that designs and delivers bespoke technology solutions for customers across a range of highly regulated sectors. Due to continued growth, they're looking to recruit a Systems Engineer or Senior Systems Engineer to join their collaborative engineering team. You'll work on varied, technically challenging projects from concept through to commissioning, developing integrated hardware and software solutions for complex engineering applications. About the Role Deliver engineering projects across the full system lifecycle, from requirements capture through to commissioning. Design and develop data acquisition, control, and automation systems. Program efficient control and data acquisition applications. Develop intuitive graphical user interfaces (GUIs). Select instrumentation and measurement hardware to meet customer specifications. Install and commission systems at customer sites across the UK. Troubleshoot complex hardware and software issues. Produce technical documentation including specifications, test plans, and user manuals. Work closely with electrical, software, and mechanical engineers to deliver integrated solutions. Support customer meetings, technical presentations, demonstrations, and proposal development. Contribute to system architecture, technical planning, and project delivery. About You Degree qualified in Electrical Engineering, Electronic Engineering, Mechatronics, Computer Science, Mechanical Engineering, or a related discipline. Experience developing industrial control, automation, or measurement systems. Knowledge of instrumentation and data acquisition systems. Experience capturing technical requirements and producing engineering documentation. Strong fault-finding and problem-solving skills across hardware and software systems. Excellent communication skills with the ability to work directly with customers. Comfortable managing multiple technical priorities in a collaborative environment. Full UK driving licence and willingness to travel to customer sites across the UK (approximately 50%). Desirable Skills Experience with PLC platforms such as Siemens or Allen-Bradley. National Instruments (NI) hardware, including DAQ, CompactRIO or PXI. LabVIEW, LabVIEW FPGA or LabVIEW Real-Time. Programming experience in Python, C, C++, or Java. Object-oriented software development. Control panel or instrumentation experience. Experience producing system-level electrical diagrams using EPLAN or similar CAD software. NI certifications (CLD, CLA, CTD, CTA, CLED). Please note we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Jul 29, 2026
Full time
Job Title: Systems Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're partnering with a growing specialist engineering company that designs and delivers bespoke technology solutions for customers across a range of highly regulated sectors. Due to continued growth, they're looking to recruit a Systems Engineer or Senior Systems Engineer to join their collaborative engineering team. You'll work on varied, technically challenging projects from concept through to commissioning, developing integrated hardware and software solutions for complex engineering applications. About the Role Deliver engineering projects across the full system lifecycle, from requirements capture through to commissioning. Design and develop data acquisition, control, and automation systems. Program efficient control and data acquisition applications. Develop intuitive graphical user interfaces (GUIs). Select instrumentation and measurement hardware to meet customer specifications. Install and commission systems at customer sites across the UK. Troubleshoot complex hardware and software issues. Produce technical documentation including specifications, test plans, and user manuals. Work closely with electrical, software, and mechanical engineers to deliver integrated solutions. Support customer meetings, technical presentations, demonstrations, and proposal development. Contribute to system architecture, technical planning, and project delivery. About You Degree qualified in Electrical Engineering, Electronic Engineering, Mechatronics, Computer Science, Mechanical Engineering, or a related discipline. Experience developing industrial control, automation, or measurement systems. Knowledge of instrumentation and data acquisition systems. Experience capturing technical requirements and producing engineering documentation. Strong fault-finding and problem-solving skills across hardware and software systems. Excellent communication skills with the ability to work directly with customers. Comfortable managing multiple technical priorities in a collaborative environment. Full UK driving licence and willingness to travel to customer sites across the UK (approximately 50%). Desirable Skills Experience with PLC platforms such as Siemens or Allen-Bradley. National Instruments (NI) hardware, including DAQ, CompactRIO or PXI. LabVIEW, LabVIEW FPGA or LabVIEW Real-Time. Programming experience in Python, C, C++, or Java. Object-oriented software development. Control panel or instrumentation experience. Experience producing system-level electrical diagrams using EPLAN or similar CAD software. NI certifications (CLD, CLA, CTD, CTA, CLED). Please note we cannot offer sponsorship for this role. If interested, please send over an updated CV.
