OLG Recruitment are currently looking for 3 Welders for our client located in Stockport. This is a permanent opportunity working Monday to Thursday 7am - 15:30pm and Fridays 7am to 12pm. Job Purpose Using appropriate welding techniques, you will perform welding activities to build aluminium welded assemblies in accordance with work instructions, engineering drawings and relevant Quality standards and SHE requirements. Main Duties and Responsibilities Always work safely, ensuring compliance with Company Health, Safety and Environmental policies, legislation and regulations. Maintain a safe and efficient working area in accordance with the 5S requirements. Plan and prepare welding activities identifying and reporting any Health & Safety hazards prior to the commencement of work. Weld various joint configurations in various positions to BS EN ISO 10042, follow work instructions, in Welding Procedure Specification WPS, sequence, completing tasks and procedural tests satisfying production schedules to the required quality level and within the specified timescale. Ensure safe handling of aluminium, weld seam and dimensional accuracy meets the drawing and welding specifications. Ensure through visual / non-destructive inspection that the welded finished component conforms to the drawing and requirements. Perform crane operation and lifting tasks in accordance with safe working practices and instructions. Remove material using manual powered and non-powered hand tools, before and during welding to remove defects within the preparation and weld deposit. Remove and dress bracings, strong backs, run-on/run-off tabs and alignment aids, and dress finished external weld surfaces using manual powered and non powered hand tools. Restore the work area and equipment to a safe and reliable condition on completion of welding including the remediation and recycling of bracings, strong backs and alignment aids. Monitor the use of consumables and adjust quantities issued, and return unused consumables for re-conditioning, re use or disposal. Complete production documentation and reporting at the appropriate stages of the work activity booking of hours on a MRP (Materials Requirements Planning) system, SAP. Comply with any qualification and certification tests as required. Additional Duties and Responsibilities Identify areas for improving the production process where possible through the monitoring of performance. Report via approved maintenance reporting procedures any equipment fault or unusual occurrence. Support logistic requirements to complete the movement, delivery, and inspection of parts and consumables as required. You may be required to undertake work at other facilities within a reasonable distance as required. Adhere to the Company s code of conduct, policies and procedures and undertake training as required. Qualifications/Education Essential Recognised time-served City and Guilds/NVQ level 3 Apprenticeship in welding. Coded to BS EN ISO standards. Knowledge/Experience A minimum of 12 months welding / fabrication experience working autonomously fabricating welded aluminium assemblies in a heavy manufacturing or fabrication environment within a recognised Company that complies to, BS EN 1090-1, BS EN ISO 3834-1.BS EN ISO 9001 and Quality Management System (WQMS, Quality Assurance/Quality Control). Good understanding of welding plant operation, the various types and welding consumables. Experience in the use of primarily MIG (MAG and TIG desirable) welding systems including working with aluminium and special applications/requirements to achieve quality to BS EN ISO 10042, Quality levels for imperfections. Demonstrable understanding of welding / fabrication of complex assemblies including the equipment and materials used, their behaviour during the welding processes in relation to the structure of materials, resultant properties and stress aspects. Demonstrable ability to read, understand and translate specifications, BS EN ISO 10042, technical drawings, work instructions and WPS/NDT Methods. Demonstrable understanding of, and identification of welding defects. Demonstrable understanding of Quality, Safety and Environmental systems and processes Desirable Experience with non-destructive testing techniques including mechanical and visual inspection techniques, dye penetration, magnetic particle and radiographic testing. Experience in working in the fabrication of military or similar heavy high integrity welded products. Able to remove material using manual powered and non-powered hand tools, before and during welding to remove defects within the preparation and weld deposit. Able to remove and dress bracings, strong backs, run-on/run-off tabs and alignment aids, and dress finished external weld surfaces using manual powered and non powered hand tools. Experience of Mechanized / Robotic welding systems and processes.
Aug 08, 2026
Full time
OLG Recruitment are currently looking for 3 Welders for our client located in Stockport. This is a permanent opportunity working Monday to Thursday 7am - 15:30pm and Fridays 7am to 12pm. Job Purpose Using appropriate welding techniques, you will perform welding activities to build aluminium welded assemblies in accordance with work instructions, engineering drawings and relevant Quality standards and SHE requirements. Main Duties and Responsibilities Always work safely, ensuring compliance with Company Health, Safety and Environmental policies, legislation and regulations. Maintain a safe and efficient working area in accordance with the 5S requirements. Plan and prepare welding activities identifying and reporting any Health & Safety hazards prior to the commencement of work. Weld various joint configurations in various positions to BS EN ISO 10042, follow work instructions, in Welding Procedure Specification WPS, sequence, completing tasks and procedural tests satisfying production schedules to the required quality level and within the specified timescale. Ensure safe handling of aluminium, weld seam and dimensional accuracy meets the drawing and welding specifications. Ensure through visual / non-destructive inspection that the welded finished component conforms to the drawing and requirements. Perform crane operation and lifting tasks in accordance with safe working practices and instructions. Remove material using manual powered and non-powered hand tools, before and during welding to remove defects within the preparation and weld deposit. Remove and dress bracings, strong backs, run-on/run-off tabs and alignment aids, and dress finished external weld surfaces using manual powered and non powered hand tools. Restore the work area and equipment to a safe and reliable condition on completion of welding including the remediation and recycling of bracings, strong backs and alignment aids. Monitor the use of consumables and adjust quantities issued, and return unused consumables for re-conditioning, re use or disposal. Complete production documentation and reporting at the appropriate stages of the work activity booking of hours on a MRP (Materials Requirements Planning) system, SAP. Comply with any qualification and certification tests as required. Additional Duties and Responsibilities Identify areas for improving the production process where possible through the monitoring of performance. Report via approved maintenance reporting procedures any equipment fault or unusual occurrence. Support logistic requirements to complete the movement, delivery, and inspection of parts and consumables as required. You may be required to undertake work at other facilities within a reasonable distance as required. Adhere to the Company s code of conduct, policies and procedures and undertake training as required. Qualifications/Education Essential Recognised time-served City and Guilds/NVQ level 3 Apprenticeship in welding. Coded to BS EN ISO standards. Knowledge/Experience A minimum of 12 months welding / fabrication experience working autonomously fabricating welded aluminium assemblies in a heavy manufacturing or fabrication environment within a recognised Company that complies to, BS EN 1090-1, BS EN ISO 3834-1.BS EN ISO 9001 and Quality Management System (WQMS, Quality Assurance/Quality Control). Good understanding of welding plant operation, the various types and welding consumables. Experience in the use of primarily MIG (MAG and TIG desirable) welding systems including working with aluminium and special applications/requirements to achieve quality to BS EN ISO 10042, Quality levels for imperfections. Demonstrable understanding of welding / fabrication of complex assemblies including the equipment and materials used, their behaviour during the welding processes in relation to the structure of materials, resultant properties and stress aspects. Demonstrable ability to read, understand and translate specifications, BS EN ISO 10042, technical drawings, work instructions and WPS/NDT Methods. Demonstrable understanding of, and identification of welding defects. Demonstrable understanding of Quality, Safety and Environmental systems and processes Desirable Experience with non-destructive testing techniques including mechanical and visual inspection techniques, dye penetration, magnetic particle and radiographic testing. Experience in working in the fabrication of military or similar heavy high integrity welded products. Able to remove material using manual powered and non-powered hand tools, before and during welding to remove defects within the preparation and weld deposit. Able to remove and dress bracings, strong backs, run-on/run-off tabs and alignment aids, and dress finished external weld surfaces using manual powered and non powered hand tools. Experience of Mechanized / Robotic welding systems and processes.
Pertemps Birmingham Commercial
Solihull, West Midlands
MIG/TIG Welder Location: Solihull Pay Rate: £15.00 - £17.00 per hour (DOE) Job Type: Full-Time Temp to Perm We are currently recruiting for an experienced MIG/TIG Welder to join a well-established engineering and manufacturing company based in Solihull . This is an excellent opportunity for a skilled welder looking to secure a long-term position with a successful and growing business. Hours of Work Monday to Thursday: 7:00am - 3:30pm Friday: 7:00am - 1:00pm Early finish every Friday Full-time hours Temp to permanent opportunity for the right candidate The Role As a MIG/TIG Welder, you will be responsible for producing high-quality welded components while working from engineering drawings and specifications. You will be working with a variety of metals in a busy fabrication environment, ensuring all work meets quality standards. Duties Include MIG and TIG welding to a high standard Welding aluminium, zinc, stainless steel, mild steel and other ferrous and non-ferrous metals Fabricating and assembling metal components Reading and interpreting engineering drawings Producing both bespoke and batch work Grinding, linishing and finishing welded products Inspecting completed welds to ensure quality standards are met Maintaining a clean, safe and organised working environment Following health and safety procedures at all times Candidate Requirements Previous experience as a MIG/TIG Welder Experience welding aluminium is essential Experience working with zinc, stainless steel, mild steel and other metals is highly desirable Ability to read and interpret engineering drawings Good attention to detail with a commitment to producing high-quality work Able to work independently and as part of a team Reliable, punctual and committed to long-term work Successful candidates will be required to complete an on-site practical MIG/TIG weld test as part of the interview process. Only applicants who successfully pass the weld test will be considered for the position. Benefits £15.00 - £17.00 per hour depending on experience Weekly pay Early finish every Friday Full-time hours Free on-site parking Overtime opportunities available Friendly and supportive working environment Genuine temp-to-perm opportunity with long-term career prospects If you are an experienced MIG/TIG Welder looking for your next opportunity in Solihull , we'd love to hear from you. Please apply with your up-to-date CV.
Aug 07, 2026
Full time
MIG/TIG Welder Location: Solihull Pay Rate: £15.00 - £17.00 per hour (DOE) Job Type: Full-Time Temp to Perm We are currently recruiting for an experienced MIG/TIG Welder to join a well-established engineering and manufacturing company based in Solihull . This is an excellent opportunity for a skilled welder looking to secure a long-term position with a successful and growing business. Hours of Work Monday to Thursday: 7:00am - 3:30pm Friday: 7:00am - 1:00pm Early finish every Friday Full-time hours Temp to permanent opportunity for the right candidate The Role As a MIG/TIG Welder, you will be responsible for producing high-quality welded components while working from engineering drawings and specifications. You will be working with a variety of metals in a busy fabrication environment, ensuring all work meets quality standards. Duties Include MIG and TIG welding to a high standard Welding aluminium, zinc, stainless steel, mild steel and other ferrous and non-ferrous metals Fabricating and assembling metal components Reading and interpreting engineering drawings Producing both bespoke and batch work Grinding, linishing and finishing welded products Inspecting completed welds to ensure quality standards are met Maintaining a clean, safe and organised working environment Following health and safety procedures at all times Candidate Requirements Previous experience as a MIG/TIG Welder Experience welding aluminium is essential Experience working with zinc, stainless steel, mild steel and other metals is highly desirable Ability to read and interpret engineering drawings Good attention to detail with a commitment to producing high-quality work Able to work independently and as part of a team Reliable, punctual and committed to long-term work Successful candidates will be required to complete an on-site practical MIG/TIG weld test as part of the interview process. Only applicants who successfully pass the weld test will be considered for the position. Benefits £15.00 - £17.00 per hour depending on experience Weekly pay Early finish every Friday Full-time hours Free on-site parking Overtime opportunities available Friendly and supportive working environment Genuine temp-to-perm opportunity with long-term career prospects If you are an experienced MIG/TIG Welder looking for your next opportunity in Solihull , we'd love to hear from you. Please apply with your up-to-date CV.
Fabricator / Welder Location: Saxmundham, East Suffolk (own transport required) Salary: Up to 37,570 PA (Depending on Experience) Hours: Monday to Friday, 42.5 hours per week Working hours options: 07:30-16:30 We're recruiting on behalf of a well-established, family-run engineering business specialising in high-quality fabrication, bespoke metalwork, and engineered solutions for the agricultural sector. Due to continued growth, they are looking to add a skilled Fabricator / Welder to their team. Role Summary: This is a hands-on workshop role where you'll be involved in the full fabrication process; from reading technical drawings through to welding and final assembly. You'll work on a range of bespoke and batch projects, producing high-quality work to tight specifications. Key Responsibilities: Fabricate, cut, shape, and assemble metal components Carry out MIG welding (2-10mm) and TIG welding (from 1.2mm stainless steel) Read and interpret engineering drawings and specifications Mechanical fitting and assembly of fabricated components Inspect finished products to ensure quality and accuracy Operate workshop machinery and tools safely Maintain high standards of health & safety and workshop housekeeping About You (Essential): Proven experience in fabrication and welding Strong MIG welding experience (TIG advantageous) Ability to read and work from technical drawings Good mechanical fitting skills High attention to detail and quality standards Strong understanding of health & safety Able to work independently and as part of a team Own transport due to location Desirable: Experience within the agricultural or similar industry TIG welding on stainless steel down to approx. 1.2mm Welding/fabrication qualifications (e.g., NVQ or equivalent) Why Apply? Opportunity to join a stable, growing business Varied and interesting fabrication work (bespoke and batch) Supportive, team-oriented environment HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer.
Aug 07, 2026
Full time
Fabricator / Welder Location: Saxmundham, East Suffolk (own transport required) Salary: Up to 37,570 PA (Depending on Experience) Hours: Monday to Friday, 42.5 hours per week Working hours options: 07:30-16:30 We're recruiting on behalf of a well-established, family-run engineering business specialising in high-quality fabrication, bespoke metalwork, and engineered solutions for the agricultural sector. Due to continued growth, they are looking to add a skilled Fabricator / Welder to their team. Role Summary: This is a hands-on workshop role where you'll be involved in the full fabrication process; from reading technical drawings through to welding and final assembly. You'll work on a range of bespoke and batch projects, producing high-quality work to tight specifications. Key Responsibilities: Fabricate, cut, shape, and assemble metal components Carry out MIG welding (2-10mm) and TIG welding (from 1.2mm stainless steel) Read and interpret engineering drawings and specifications Mechanical fitting and assembly of fabricated components Inspect finished products to ensure quality and accuracy Operate workshop machinery and tools safely Maintain high standards of health & safety and workshop housekeeping About You (Essential): Proven experience in fabrication and welding Strong MIG welding experience (TIG advantageous) Ability to read and work from technical drawings Good mechanical fitting skills High attention to detail and quality standards Strong understanding of health & safety Able to work independently and as part of a team Own transport due to location Desirable: Experience within the agricultural or similar industry TIG welding on stainless steel down to approx. 1.2mm Welding/fabrication qualifications (e.g., NVQ or equivalent) Why Apply? Opportunity to join a stable, growing business Varied and interesting fabrication work (bespoke and batch) Supportive, team-oriented environment HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer.
Plater/Fabricator £150 trade test payment if you pass and start on assignment with us! We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Shift rates: Day Shift: £18.98 per hour Afternoon Shift: £22.78 per hour Night Shift: £24.10 per hour Overtime 1.5 (Mon-Sat): £28.47 per hour Overtime 2 (Sundays): £37.96 per hour Shift patterns: Days: Monday - Thursday, 06:45 - 15:00. Friday, 06:45 - 12:45 Back shift: Monday - Thursday, 14:45 - 11:00. Friday, 10:45 - 16:45 Night shift: Monday - Thursday, 22:45 - 07:00. Friday, 16:30 - 22:30 Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of Fabrication Time Served Welder Relevant NVQ Level 3 Your Benefits Package Overtime available On site occupational health Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app Dedicated On site Randstad team to help with any queries Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader!
Aug 07, 2026
Contractor
Plater/Fabricator £150 trade test payment if you pass and start on assignment with us! We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Shift rates: Day Shift: £18.98 per hour Afternoon Shift: £22.78 per hour Night Shift: £24.10 per hour Overtime 1.5 (Mon-Sat): £28.47 per hour Overtime 2 (Sundays): £37.96 per hour Shift patterns: Days: Monday - Thursday, 06:45 - 15:00. Friday, 06:45 - 12:45 Back shift: Monday - Thursday, 14:45 - 11:00. Friday, 10:45 - 16:45 Night shift: Monday - Thursday, 22:45 - 07:00. Friday, 16:30 - 22:30 Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of Fabrication Time Served Welder Relevant NVQ Level 3 Your Benefits Package Overtime available On site occupational health Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app Dedicated On site Randstad team to help with any queries Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader!
Pipe Fitter/ Coded TIG Welder (days) Liverpool £20ph + overtime (x1.5) Mon - Fri Certain Advantage is partnering with an engineering business to recruit an experienced Pipe Fitter/ Coded TIG Welder . You will carry out pipe fabrication and welding duties with an emphasis on quality throughout, following established procedures and protocols always ensuring that customer' and company requirements are met. Key Responsibilities: TIG welding to coded standards in the 6G position across both mild and stainless steel. Interpreting and working from basic sketches, piping isometrics, and technical engineering drawings. All welding carried out to certified coded standards. Working flexibly across both on-site and workshop environments. Your Background: Good experience in TIG welding pipework. Able to work to timescales, using own initiative both individually and as part of a team. Proof of previous codings beneficial. During the Interview, We May Ask You About: CSCS/SPA/CCNSG TIG welding Are you intrigued? Apply now! Lukas - / Working with Certain Advantage We go the extra mile to match top talent with the right opportunities. Whether you're looking to make a big impact or take the next step in your career, we're here to support you. We work with businesses across the UK in Engineering, IT, Finance, and Marketing. If this role isn't for you, visit certainadvantage.co.uk to sign up for job alerts and career advice.
Aug 07, 2026
Seasonal
Pipe Fitter/ Coded TIG Welder (days) Liverpool £20ph + overtime (x1.5) Mon - Fri Certain Advantage is partnering with an engineering business to recruit an experienced Pipe Fitter/ Coded TIG Welder . You will carry out pipe fabrication and welding duties with an emphasis on quality throughout, following established procedures and protocols always ensuring that customer' and company requirements are met. Key Responsibilities: TIG welding to coded standards in the 6G position across both mild and stainless steel. Interpreting and working from basic sketches, piping isometrics, and technical engineering drawings. All welding carried out to certified coded standards. Working flexibly across both on-site and workshop environments. Your Background: Good experience in TIG welding pipework. Able to work to timescales, using own initiative both individually and as part of a team. Proof of previous codings beneficial. During the Interview, We May Ask You About: CSCS/SPA/CCNSG TIG welding Are you intrigued? Apply now! Lukas - / Working with Certain Advantage We go the extra mile to match top talent with the right opportunities. Whether you're looking to make a big impact or take the next step in your career, we're here to support you. We work with businesses across the UK in Engineering, IT, Finance, and Marketing. If this role isn't for you, visit certainadvantage.co.uk to sign up for job alerts and career advice.
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experiencedMIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Overall annual earnings with overtime is approx. £35,000 - £40,000 p/a (x1.5 rate Monday to Saturday overtime after 40 hours & x2 rate on Sundays) Great business with a strong order book.
Aug 07, 2026
Full time
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experiencedMIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Overall annual earnings with overtime is approx. £35,000 - £40,000 p/a (x1.5 rate Monday to Saturday overtime after 40 hours & x2 rate on Sundays) Great business with a strong order book.
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Overall annual earnings with overtime is approx. £35,000 - £40,000 p/a (x1.5 rate Monday to Saturday overtime after 40 hours & x2 rate on Sundays) Great business with a strong order book.
Aug 07, 2026
Full time
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Overall annual earnings with overtime is approx. £35,000 - £40,000 p/a (x1.5 rate Monday to Saturday overtime after 40 hours & x2 rate on Sundays) Great business with a strong order book.
Pertemps Wolverhampton Temps
Wolverhampton, Staffordshire
MIG Welder & Fabricator - Temp to Perm Location: Willenhall Hours: Monday to Friday, 8:00am - 5:00pm Pay: £14.50 per hour Contract: Temp to Perm through Pertemps Wolverhampton Pertemps Wolverhampton is recruiting on behalf of our client for an experienced MIG Welder & Fabricator to join a busy manufacturing team based in Willenhall. This is an excellent temp-to-perm opportunity for the right candidate, offering long-term stability with a well-established business. The successful candidate will be involved in the manufacture, repair, and refurbishment of conveyor systems for production machinery. A full UK driving licence is preferred, as there will be access to a company van when required. Key Responsibilities MIG welding and fabrication of conveyor systems and production machinery. Building new conveyors and repairing existing conveyor equipment. Reading and interpreting engineering drawings. Setting out materials and fabricating components to specification. Cutting, shaping, assembling, and welding steel components. Using fabrication equipment safely and efficiently. Maintaining high standards of quality and health & safety. Experience RequiredApplicants should be confident using and working with: Industrial MIG welding equipment. Cutting and profiling machinery, including CNC plasma or laser cutters. Horizontal bandsaws for cutting structural steel. Hydraulic ironworkers for punching and shearing. Hydraulic press brakes for bending sheet metal. Plate rollers for forming curved sections. Basic TIG welding (advantageous but not essential). Drill presses and milling machines. Angle grinders and belt sanders for preparation and finishing. Measuring equipment and general fabrication tools. Candidate Requirements Previous experience as a MIG Welder/Fabricator. Ability to read and interpret engineering drawings. Confident in setting out fabrication work independently. Excellent MIG welding and fabrication skills. Good attention to detail and pride in producing quality work. Ability to work independently and as part of a team. Full UK driving licence preferred. What We Offer £14.50 per hour. Monday to Friday, 8:00am - 5:00pm. Temp-to-perm opportunity through Pertemps Wolverhampton. Long-term career prospects with a growing company. Access to a company van when required. If you have the skills and experience we're looking for and are seeking a long-term opportunity, apply today through Pertemps Wolverhampton .
Aug 07, 2026
Full time
MIG Welder & Fabricator - Temp to Perm Location: Willenhall Hours: Monday to Friday, 8:00am - 5:00pm Pay: £14.50 per hour Contract: Temp to Perm through Pertemps Wolverhampton Pertemps Wolverhampton is recruiting on behalf of our client for an experienced MIG Welder & Fabricator to join a busy manufacturing team based in Willenhall. This is an excellent temp-to-perm opportunity for the right candidate, offering long-term stability with a well-established business. The successful candidate will be involved in the manufacture, repair, and refurbishment of conveyor systems for production machinery. A full UK driving licence is preferred, as there will be access to a company van when required. Key Responsibilities MIG welding and fabrication of conveyor systems and production machinery. Building new conveyors and repairing existing conveyor equipment. Reading and interpreting engineering drawings. Setting out materials and fabricating components to specification. Cutting, shaping, assembling, and welding steel components. Using fabrication equipment safely and efficiently. Maintaining high standards of quality and health & safety. Experience RequiredApplicants should be confident using and working with: Industrial MIG welding equipment. Cutting and profiling machinery, including CNC plasma or laser cutters. Horizontal bandsaws for cutting structural steel. Hydraulic ironworkers for punching and shearing. Hydraulic press brakes for bending sheet metal. Plate rollers for forming curved sections. Basic TIG welding (advantageous but not essential). Drill presses and milling machines. Angle grinders and belt sanders for preparation and finishing. Measuring equipment and general fabrication tools. Candidate Requirements Previous experience as a MIG Welder/Fabricator. Ability to read and interpret engineering drawings. Confident in setting out fabrication work independently. Excellent MIG welding and fabrication skills. Good attention to detail and pride in producing quality work. Ability to work independently and as part of a team. Full UK driving licence preferred. What We Offer £14.50 per hour. Monday to Friday, 8:00am - 5:00pm. Temp-to-perm opportunity through Pertemps Wolverhampton. Long-term career prospects with a growing company. Access to a company van when required. If you have the skills and experience we're looking for and are seeking a long-term opportunity, apply today through Pertemps Wolverhampton .
Job title:Fabricator WelderJob location:BurtonSalary:£18Hours per week:40Overtime AvailableDuration:PermanentStart date:ImmediateClient Summary:Our client is a well-established manufacturing business specialising in the production of large, bespoke fabricated products for a variety of industries. Due to continued growth, they are looking to recruit an experienced Fabricator Welder to join their skilled workshop team.Position Summary:The successful candidate will be responsible for the fabrication and welding of large specialist fabricated products using both mild steel and stainless steel. You will be able to interpret and work from engineering drawings with minimal supervision, producing high-quality work to specification while maintaining excellent health and safety standards.Key Duties: Fabrication and welding of large bespoke products using mild steel and stainless steel. MIG welding to a high standard, with TIG welding experience being advantageous. Read and interpret engineering drawings accurately. Measure, mark out and prepare materials for fabrication. Assemble fabricated components in line with engineering specifications. Operate workshop equipment safely and efficiently. Carry out quality checks to ensure finished products meet customer requirements. Work collaboratively with the production team to achieve production targets. Maintain a clean, organised and safe working environment. Adhere to all company health and safety procedures.Person Profile/Experience: Previous experience as a Fabricator Welder within a manufacturing environment. Strong MIG welding experience with mild steel and stainless steel. Ability to fabricate from engineering drawings without supervision. Experience working on large fabricated products or heavy engineering projects. Excellent attention to detail and commitment to producing high-quality work. Ability to work independently and as part of a team. Positive attitude with a strong work ethic and willingness to contribute to the wider team.Qualifications: Time-served apprenticeship or recognised fabrication/welding qualification (preferred but not essential). MIG welding qualification or coded welding experience is advantageous. Ability to read and interpret engineering drawings. Forklift or overhead crane experience is beneficial but not essential.Contact Information: James BellEmail:
Aug 06, 2026
Full time
Job title:Fabricator WelderJob location:BurtonSalary:£18Hours per week:40Overtime AvailableDuration:PermanentStart date:ImmediateClient Summary:Our client is a well-established manufacturing business specialising in the production of large, bespoke fabricated products for a variety of industries. Due to continued growth, they are looking to recruit an experienced Fabricator Welder to join their skilled workshop team.Position Summary:The successful candidate will be responsible for the fabrication and welding of large specialist fabricated products using both mild steel and stainless steel. You will be able to interpret and work from engineering drawings with minimal supervision, producing high-quality work to specification while maintaining excellent health and safety standards.Key Duties: Fabrication and welding of large bespoke products using mild steel and stainless steel. MIG welding to a high standard, with TIG welding experience being advantageous. Read and interpret engineering drawings accurately. Measure, mark out and prepare materials for fabrication. Assemble fabricated components in line with engineering specifications. Operate workshop equipment safely and efficiently. Carry out quality checks to ensure finished products meet customer requirements. Work collaboratively with the production team to achieve production targets. Maintain a clean, organised and safe working environment. Adhere to all company health and safety procedures.Person Profile/Experience: Previous experience as a Fabricator Welder within a manufacturing environment. Strong MIG welding experience with mild steel and stainless steel. Ability to fabricate from engineering drawings without supervision. Experience working on large fabricated products or heavy engineering projects. Excellent attention to detail and commitment to producing high-quality work. Ability to work independently and as part of a team. Positive attitude with a strong work ethic and willingness to contribute to the wider team.Qualifications: Time-served apprenticeship or recognised fabrication/welding qualification (preferred but not essential). MIG welding qualification or coded welding experience is advantageous. Ability to read and interpret engineering drawings. Forklift or overhead crane experience is beneficial but not essential.Contact Information: James BellEmail:
We are seeking a skilled Metal & Stainless Steel Welder Fabricator to join our team, supporting projects within the water industry. You will be working alongside mechanical and civil engineering teams to fabricate and assemble high-quality components used in water infrastructure and treatment systems. Working Hours & Overtime Standard working hours: 07 00, with a 1-hour unpaid break Weekday hours are paid at the standard hourly rate Overtime is typically available to meet project demands Weekend shifts are paid at time and a half (£28.50 per hour) Minimum 40 hours per week (average 48 hours per week) Key Responsibilities Fabricate and weld mild steel and stainless steel components to engineering drawings and specifications Perform MIG and TIG welding to a high standard Read and interpret technical drawings, plans, and blueprints Assemble fabricated parts for installation in water industry projects Ensure all work meets quality, safety, and industry standards Carry out inspections and basic quality checks on completed work Collaborate with mechanical and civil engineers to meet project requirements Maintain a clean and safe working environment Requirements Proven experience as a welder fabricator, particularly with stainless steel Strong MIG and TIG welding skills Ability to read and work from technical drawings Experience working on infrastructure, water industry, or similar engineering projects (preferred) Good understanding of health & safety regulations Strong attention to detail and workmanship quality Ability to work independently and as part of a team Desirable Skills Previous experience in the water or utilities sector Welding certifications (e.g., coded welding) Experience with site installation work What We Offer Competitive hourly rate of £17 - £19 Consistent workload with regular overtime opportunities Weekend overtime paid at enhanced rate Opportunity to work on specialist engineering projects within the water industry Supportive team environment
Aug 06, 2026
Full time
We are seeking a skilled Metal & Stainless Steel Welder Fabricator to join our team, supporting projects within the water industry. You will be working alongside mechanical and civil engineering teams to fabricate and assemble high-quality components used in water infrastructure and treatment systems. Working Hours & Overtime Standard working hours: 07 00, with a 1-hour unpaid break Weekday hours are paid at the standard hourly rate Overtime is typically available to meet project demands Weekend shifts are paid at time and a half (£28.50 per hour) Minimum 40 hours per week (average 48 hours per week) Key Responsibilities Fabricate and weld mild steel and stainless steel components to engineering drawings and specifications Perform MIG and TIG welding to a high standard Read and interpret technical drawings, plans, and blueprints Assemble fabricated parts for installation in water industry projects Ensure all work meets quality, safety, and industry standards Carry out inspections and basic quality checks on completed work Collaborate with mechanical and civil engineers to meet project requirements Maintain a clean and safe working environment Requirements Proven experience as a welder fabricator, particularly with stainless steel Strong MIG and TIG welding skills Ability to read and work from technical drawings Experience working on infrastructure, water industry, or similar engineering projects (preferred) Good understanding of health & safety regulations Strong attention to detail and workmanship quality Ability to work independently and as part of a team Desirable Skills Previous experience in the water or utilities sector Welding certifications (e.g., coded welding) Experience with site installation work What We Offer Competitive hourly rate of £17 - £19 Consistent workload with regular overtime opportunities Weekend overtime paid at enhanced rate Opportunity to work on specialist engineering projects within the water industry Supportive team environment
Pertemps Wolverhampton Temps
Willenhall, West Midlands
MIG Welder & Fabricator - Temp to Perm Location: Willenhall Hours: Monday to Friday, 8:00am - 5:00pm Pay: £16.00 - £18.00 per hour Contract: Temp to Perm through Pertemps Wolverhampton Pertemps Wolverhampton is recruiting on behalf of our client for an experienced MIG Welder & Fabricator to join a busy manufacturing team based in Willenhall. This is an excellent temp-to-perm opportunity for the right candidate, offering long-term stability with a well-established business. The successful candidate will be involved in the manufacture, repair, and refurbishment of conveyor systems for production machinery. Key Responsibilities MIG welding and fabrication of conveyor systems and production machinery. Building new conveyors and repairing existing conveyor equipment. Reading and interpreting engineering drawings. Setting out materials and fabricating components to specification. Cutting, shaping, assembling, and welding steel components. Using fabrication equipment safely and efficiently. Maintaining high standards of quality and health & safety. Experience RequiredApplicants should be confident using and working with: Industrial MIG welding equipment. Cutting and profiling machinery, including CNC plasma or laser cutters. Horizontal bandsaws for cutting structural steel. Hydraulic ironworkers for punching and shearing. Hydraulic press brakes for bending sheet metal. Plate rollers for forming curved sections. Basic TIG welding (advantageous but not essential). Drill presses and milling machines. Angle grinders and belt sanders for preparation and finishing. Measuring equipment and general fabrication tools. Candidate Requirements Previous experience as a MIG Welder/Fabricator. Ability to read and interpret engineering drawings. Confident in setting out fabrication work independently. Excellent MIG welding and fabrication skills. Good attention to detail and pride in producing quality work. Ability to work independently and as part of a team. Full UK driving licence preferred. What We Offer £16.00 to £18.00 per hour. Monday to Friday, 8:00am - 5:00pm. Temp-to-perm opportunity through Pertemps Wolverhampton. Long-term career prospects with a growing company. If you have the skills and experience we're looking for and are seeking a long-term opportunity, apply today through Pertemps Wolverhampton .
Aug 05, 2026
Full time
MIG Welder & Fabricator - Temp to Perm Location: Willenhall Hours: Monday to Friday, 8:00am - 5:00pm Pay: £16.00 - £18.00 per hour Contract: Temp to Perm through Pertemps Wolverhampton Pertemps Wolverhampton is recruiting on behalf of our client for an experienced MIG Welder & Fabricator to join a busy manufacturing team based in Willenhall. This is an excellent temp-to-perm opportunity for the right candidate, offering long-term stability with a well-established business. The successful candidate will be involved in the manufacture, repair, and refurbishment of conveyor systems for production machinery. Key Responsibilities MIG welding and fabrication of conveyor systems and production machinery. Building new conveyors and repairing existing conveyor equipment. Reading and interpreting engineering drawings. Setting out materials and fabricating components to specification. Cutting, shaping, assembling, and welding steel components. Using fabrication equipment safely and efficiently. Maintaining high standards of quality and health & safety. Experience RequiredApplicants should be confident using and working with: Industrial MIG welding equipment. Cutting and profiling machinery, including CNC plasma or laser cutters. Horizontal bandsaws for cutting structural steel. Hydraulic ironworkers for punching and shearing. Hydraulic press brakes for bending sheet metal. Plate rollers for forming curved sections. Basic TIG welding (advantageous but not essential). Drill presses and milling machines. Angle grinders and belt sanders for preparation and finishing. Measuring equipment and general fabrication tools. Candidate Requirements Previous experience as a MIG Welder/Fabricator. Ability to read and interpret engineering drawings. Confident in setting out fabrication work independently. Excellent MIG welding and fabrication skills. Good attention to detail and pride in producing quality work. Ability to work independently and as part of a team. Full UK driving licence preferred. What We Offer £16.00 to £18.00 per hour. Monday to Friday, 8:00am - 5:00pm. Temp-to-perm opportunity through Pertemps Wolverhampton. Long-term career prospects with a growing company. If you have the skills and experience we're looking for and are seeking a long-term opportunity, apply today through Pertemps Wolverhampton .
TIG welder Level 1 Immediate start following a successful weld test Pay - £14.25 - £16.60 an hour Hours - shift - 6am - 4pm & 4pm - 2am Monday - Thursday, Overtime is available but is not mandartory. Location - Oxford Cowley Client; We are proud to be working alongside an automotive manufacturing specialist who due to continued growth are looking for welders to join their team in Oxford in their recently refurburished facilty. The role; - Carry out semi skilled TIG welding work ( Spot Welding ) Experience required; - Minimal Welding experience - Experience working in an automotive/mechanical manufacturing environment desired but not essential If this role is of interest please call Adam or Scott to discuss in more detail. INDENG Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position.
Aug 05, 2026
Full time
TIG welder Level 1 Immediate start following a successful weld test Pay - £14.25 - £16.60 an hour Hours - shift - 6am - 4pm & 4pm - 2am Monday - Thursday, Overtime is available but is not mandartory. Location - Oxford Cowley Client; We are proud to be working alongside an automotive manufacturing specialist who due to continued growth are looking for welders to join their team in Oxford in their recently refurburished facilty. The role; - Carry out semi skilled TIG welding work ( Spot Welding ) Experience required; - Minimal Welding experience - Experience working in an automotive/mechanical manufacturing environment desired but not essential If this role is of interest please call Adam or Scott to discuss in more detail. INDENG Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position.
Welders & Fabricators TIG Welders Aerospace Manufacturing Dunstable Full Time, Permanent £38,000 - £42,000 per annum (depending on experience) DAY shift and NIGHT Shift available Monday to Thursday four day week Response Personnel is recruiting Welders and Fabricators / TIG Welders on behalf of a leading aerospace manufacturer based in Dunstable. These are full time, permanent positions offered on either a day shift or night shift, with a four-day working week and excellent overtime opportunities. Shift Pattern & Hours Four day week: Monday to Thursday Day shift: 6.00am - 3.45pm or 7.00am - 4.45pm Night shift: 3.45pm - 1.30am (night shift premium: an additional 1/3 pay) Contracted hours: 37 hours, Monday to Thursday Overtime generally available Friday and Saturday, paid at x1.5 Salary & Benefits £38,000 - £42,000 depending on experience 5 days holiday plus Bank Holidays, increasing to 22 days (plus Bank Holidays) after 3 years Subsidised canteen Life Assurance x3 Company Sick Pay (after successful probationary period) Enhanced Pension Scheme - joinable from Day 1, with flexible contributions via salary sacrifice Access to an Independent Financial Advisor for pension advice Non-contributory Income Protection Insurance Employee Assistance Programme (EAP) On-site car parking On-site shower facilities The Role Production of ducting components using various metals including stainless steel, Titanium and Inconel MIG and TIG welding experience Ability to operate a turntable controlled with a foot pedal, and to operate a welding chamber (Glove Box) Ability to obtain and maintain approval stamps Ability to read and understand engineering drawings Previous experience within the Aerospace industry is desirable Do you have experience working with ducting? Can you read and understand engineering drawings, and are you comfortable working with hand tools (snips, hammers, abrasive pads, etc.)? Materials include - Inconel, Stainless Steel and Titanium before? Recent TIG welding experience, and have you TIG welded Stainless Steel, Titanium and/or nickel alloy tubes with around a 0.71mm wall thickness and 6.35mm diameter Are you comfortable using a foot controller while TIG welding? Do you have Aerospace Experience Have you used a turntable when TIG welding before? Have you previously been formally qualified to weld in different positions, ideally 5F and 6G? To apply, contact Response Personnel with your CV and screening question answers today TIG Welder / Welding / TIG Welder / Welder Fabricator
Aug 05, 2026
Full time
Welders & Fabricators TIG Welders Aerospace Manufacturing Dunstable Full Time, Permanent £38,000 - £42,000 per annum (depending on experience) DAY shift and NIGHT Shift available Monday to Thursday four day week Response Personnel is recruiting Welders and Fabricators / TIG Welders on behalf of a leading aerospace manufacturer based in Dunstable. These are full time, permanent positions offered on either a day shift or night shift, with a four-day working week and excellent overtime opportunities. Shift Pattern & Hours Four day week: Monday to Thursday Day shift: 6.00am - 3.45pm or 7.00am - 4.45pm Night shift: 3.45pm - 1.30am (night shift premium: an additional 1/3 pay) Contracted hours: 37 hours, Monday to Thursday Overtime generally available Friday and Saturday, paid at x1.5 Salary & Benefits £38,000 - £42,000 depending on experience 5 days holiday plus Bank Holidays, increasing to 22 days (plus Bank Holidays) after 3 years Subsidised canteen Life Assurance x3 Company Sick Pay (after successful probationary period) Enhanced Pension Scheme - joinable from Day 1, with flexible contributions via salary sacrifice Access to an Independent Financial Advisor for pension advice Non-contributory Income Protection Insurance Employee Assistance Programme (EAP) On-site car parking On-site shower facilities The Role Production of ducting components using various metals including stainless steel, Titanium and Inconel MIG and TIG welding experience Ability to operate a turntable controlled with a foot pedal, and to operate a welding chamber (Glove Box) Ability to obtain and maintain approval stamps Ability to read and understand engineering drawings Previous experience within the Aerospace industry is desirable Do you have experience working with ducting? Can you read and understand engineering drawings, and are you comfortable working with hand tools (snips, hammers, abrasive pads, etc.)? Materials include - Inconel, Stainless Steel and Titanium before? Recent TIG welding experience, and have you TIG welded Stainless Steel, Titanium and/or nickel alloy tubes with around a 0.71mm wall thickness and 6.35mm diameter Are you comfortable using a foot controller while TIG welding? Do you have Aerospace Experience Have you used a turntable when TIG welding before? Have you previously been formally qualified to weld in different positions, ideally 5F and 6G? To apply, contact Response Personnel with your CV and screening question answers today TIG Welder / Welding / TIG Welder / Welder Fabricator
We have an excellent opportunity for an experienced Fabricator / Welder to join an expanding award-winning team of production technicians, manufacturing stainless steel components, for the automotive, utilities and food industries based close to Meadowhall and the M1 motorway in Sheffield. About the role The role of a Fabricator / Welder involves working within a passionate team responsible for fabricating and TIG welding various products to the highest standards. Key activities involve: Successfully achieving the daily planned production schedule Maintaining and striving to improve, production quality Contributing to the smooth operation of the workshop About the hours & rewards As a Fabricator / Welder, you will work Monday to Friday, 40 hours a week and the benefits are: A salary of £14.00 - £20.00 per hour (depending on experience). Daytime & weekday work only / Early finish Fridays (No weekend work - unless on overtime) 4 weeks plus 8 days statutory holiday (plus a holiday scheme gaining 1 additional day per year of service) Christmas/New Year Shutdown Company Pension Generous Overtime rates Staff Parking Staff discount on company products Company Events About you As a Fabricator / Welder, you must have a professional approach to work and possess the drive and energy to contribute to a flexible, fast-paced environment and contribute to the overall performance and growth of both companies and you must have / be: A proven track record of the high quality TIG / MIG welding and general fabrication skills. Able to produce work of a high standard within given time constraints. Have a good attendance and timekeeping record. Open to new ideas and make a positive contribution to the team. Some experience in small bore pipe welding / Jig work and stainless steel fabrication, (advantageous not essential) More about the company Our client is a renowned Sheffield company with an established substantial and growing client base and an excellent reputation in the industry. They are a family run business with a strong work ethic and a team of long-serving and highly dedicated industry professionals and as holders of ISO9001 and the prestigious 'Made in Sheffield' they take a great pride in the quality of their products, specialising in small component fabrication and welding services.As 2023 winners of the "Made in Yorkshire" Manufacturer of the Year (u. £25M) award, the company constantly strives to evolve, grow and continuously seek excellence in all operations, working closely with the Company of Cutler's in Hallamshire. How to apply Please note that eRecruitSmart is advertising the role of Welder / Fabricator on behalf of the Hiring Company and your CV will be sent to the Hiring Manager who is responsible for the vacancy that you have applied to. Please only apply if you consent to these terms.You must reside in and have eligibility to work in the UK and live within a reasonable commute to Sheffield. Please note, only suitable applicants will be contacted. If your address and contact details are not on your CV, you will not be considered.We look forward to hearing from you!
Aug 05, 2026
Full time
We have an excellent opportunity for an experienced Fabricator / Welder to join an expanding award-winning team of production technicians, manufacturing stainless steel components, for the automotive, utilities and food industries based close to Meadowhall and the M1 motorway in Sheffield. About the role The role of a Fabricator / Welder involves working within a passionate team responsible for fabricating and TIG welding various products to the highest standards. Key activities involve: Successfully achieving the daily planned production schedule Maintaining and striving to improve, production quality Contributing to the smooth operation of the workshop About the hours & rewards As a Fabricator / Welder, you will work Monday to Friday, 40 hours a week and the benefits are: A salary of £14.00 - £20.00 per hour (depending on experience). Daytime & weekday work only / Early finish Fridays (No weekend work - unless on overtime) 4 weeks plus 8 days statutory holiday (plus a holiday scheme gaining 1 additional day per year of service) Christmas/New Year Shutdown Company Pension Generous Overtime rates Staff Parking Staff discount on company products Company Events About you As a Fabricator / Welder, you must have a professional approach to work and possess the drive and energy to contribute to a flexible, fast-paced environment and contribute to the overall performance and growth of both companies and you must have / be: A proven track record of the high quality TIG / MIG welding and general fabrication skills. Able to produce work of a high standard within given time constraints. Have a good attendance and timekeeping record. Open to new ideas and make a positive contribution to the team. Some experience in small bore pipe welding / Jig work and stainless steel fabrication, (advantageous not essential) More about the company Our client is a renowned Sheffield company with an established substantial and growing client base and an excellent reputation in the industry. They are a family run business with a strong work ethic and a team of long-serving and highly dedicated industry professionals and as holders of ISO9001 and the prestigious 'Made in Sheffield' they take a great pride in the quality of their products, specialising in small component fabrication and welding services.As 2023 winners of the "Made in Yorkshire" Manufacturer of the Year (u. £25M) award, the company constantly strives to evolve, grow and continuously seek excellence in all operations, working closely with the Company of Cutler's in Hallamshire. How to apply Please note that eRecruitSmart is advertising the role of Welder / Fabricator on behalf of the Hiring Company and your CV will be sent to the Hiring Manager who is responsible for the vacancy that you have applied to. Please only apply if you consent to these terms.You must reside in and have eligibility to work in the UK and live within a reasonable commute to Sheffield. Please note, only suitable applicants will be contacted. If your address and contact details are not on your CV, you will not be considered.We look forward to hearing from you!
Welder Fabricator Fairford £16.47 - £17.66 per hour Our client based in Fairford are looking for a Welder Fabricator to join their growing team. Welder Fabricator Roles and Responsibilities: Carry out MIG and TIG welding Read and interpret from engineering drawings Manufacturing and fabricating a wide range of steel and metal products Preparing, cutting, assembling and finishing materials using a variety of workshop tools and equipment Inspect completed Welds Assisting with the installation and fitting of fabricated products Welder Fabricator Ideal Candidate: TIG and MIG welding Coded in either MIG or TIG (desirable) Proven experience in welding and fabrication across a variety of projects The ability to work independently with minimal supervision, while also contributing effectively as part of a team Relevant welding or fabrication qualifications are beneficial Willingness to work on customer sites and undertake evening or weekend overtime when necessary Welder Fabricator Working Hours and Benefits: Monday Thursday, 07 30 Friday, 07 30 39 hours per week, including a 30-minute lunch break 30.5 31 days paid holiday (including bank holidays) Company pension scheme with employer contributions FSB Healthcare and employee benefits package Ongoing training and development opportunities Performance-related bonus scheme Enhanced overtime rates Company sick pay Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Aug 05, 2026
Seasonal
Welder Fabricator Fairford £16.47 - £17.66 per hour Our client based in Fairford are looking for a Welder Fabricator to join their growing team. Welder Fabricator Roles and Responsibilities: Carry out MIG and TIG welding Read and interpret from engineering drawings Manufacturing and fabricating a wide range of steel and metal products Preparing, cutting, assembling and finishing materials using a variety of workshop tools and equipment Inspect completed Welds Assisting with the installation and fitting of fabricated products Welder Fabricator Ideal Candidate: TIG and MIG welding Coded in either MIG or TIG (desirable) Proven experience in welding and fabrication across a variety of projects The ability to work independently with minimal supervision, while also contributing effectively as part of a team Relevant welding or fabrication qualifications are beneficial Willingness to work on customer sites and undertake evening or weekend overtime when necessary Welder Fabricator Working Hours and Benefits: Monday Thursday, 07 30 Friday, 07 30 39 hours per week, including a 30-minute lunch break 30.5 31 days paid holiday (including bank holidays) Company pension scheme with employer contributions FSB Healthcare and employee benefits package Ongoing training and development opportunities Performance-related bonus scheme Enhanced overtime rates Company sick pay Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
TIG Welder Location: Near Lancing Job Type: Temp to Perm Pay: Competitive, dependent on experience We are currently recruiting an experienced TIG Welder to join a busy manufacturing company near Lancing. Requirements: Proven TIG welding experience (essential) MIG welding experience (essential) Ability to work from engineering drawings is an advantage Good attention to detail Own transport is essential due to the location This is a temp-to-perm opportunity offering long-term prospects for the right candidate.
Aug 05, 2026
Full time
TIG Welder Location: Near Lancing Job Type: Temp to Perm Pay: Competitive, dependent on experience We are currently recruiting an experienced TIG Welder to join a busy manufacturing company near Lancing. Requirements: Proven TIG welding experience (essential) MIG welding experience (essential) Ability to work from engineering drawings is an advantage Good attention to detail Own transport is essential due to the location This is a temp-to-perm opportunity offering long-term prospects for the right candidate.
Schedule: Monday to Friday 07:00-17:00 Payrate: up to £23 p/h Overview We are seeking a motivated Tig welder to join our client's team. This position is suitable for an experienced welder that will be contributing to the manufacture of high quality of medical equipment. Responsibilities Perform TIG welding on medical equipment components Adjust sheet parts to fit weld jigs accurately Use measuring equipment to ensure components meet drawing specifications Strictly adhere to health and safety and standard operating procedures Working with 1,2,3 millimetre sheet metal Requirements Past welding experience for kitchen manufacturers- cabinets, hospital equipment, trolleys, furniture Ideally a tidy neat worker Strong practical skills and attention to detail Ability to collaborate effectively within cross-functional teams to meet deadlines Knowledge of lean manufacturing techniques and modern manufacturing methods Benefits: Casual dress Free parking On-site parking
Aug 05, 2026
Seasonal
Schedule: Monday to Friday 07:00-17:00 Payrate: up to £23 p/h Overview We are seeking a motivated Tig welder to join our client's team. This position is suitable for an experienced welder that will be contributing to the manufacture of high quality of medical equipment. Responsibilities Perform TIG welding on medical equipment components Adjust sheet parts to fit weld jigs accurately Use measuring equipment to ensure components meet drawing specifications Strictly adhere to health and safety and standard operating procedures Working with 1,2,3 millimetre sheet metal Requirements Past welding experience for kitchen manufacturers- cabinets, hospital equipment, trolleys, furniture Ideally a tidy neat worker Strong practical skills and attention to detail Ability to collaborate effectively within cross-functional teams to meet deadlines Knowledge of lean manufacturing techniques and modern manufacturing methods Benefits: Casual dress Free parking On-site parking
Role : Welder Are you looking for something extra in your work? Do you want great pay rates and excellent working conditions? You could grow your skills working for a recognised global brand in a challenging and quality driven manufacturing environment. Excellent working conditions and great rates please read on for more. Job title: MIG Welder Job type: 24 months Fixed term contract (Jan 2026 - Jan 2028) Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Days £18.97 Backs £22.78 Night £24.10 OT 1.5 £28.47 OT 2.0 £37.96 Three shift pattern, but you must be flexible to work any shift. Some shifts may rotate so flexibility is required. DAYS: 06:45am - 15:00pm (Mon - Thur) 6.45am- 12.45pm (Fri) BACKS: 14:45pm - 23:00pm(Mon - Thur) 10.45am - 16.45pm(Fri) NIGHTS: 22:45pm- 07:00am (Mon - Thur) 16.30pm - 22.30pm (Fri) Responsibilities: Build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure Some manual lifting Attention to detail Focus on safety and quality Requirements: Previous experience of MIG, MMA Time Served Relevant NVQ Level 3 qualification Benefits: Overtime Off every other Friday On site occupational health and Physio Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app which offers you access to a huge range of discounts and savings available at much loved high street stores, supermarkets, restaurants, cinemas, DIY stores, coffee shops and more. Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader! £150 trade test payment if you pass and start on assignment with us! "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
Aug 04, 2026
Contractor
Role : Welder Are you looking for something extra in your work? Do you want great pay rates and excellent working conditions? You could grow your skills working for a recognised global brand in a challenging and quality driven manufacturing environment. Excellent working conditions and great rates please read on for more. Job title: MIG Welder Job type: 24 months Fixed term contract (Jan 2026 - Jan 2028) Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Days £18.97 Backs £22.78 Night £24.10 OT 1.5 £28.47 OT 2.0 £37.96 Three shift pattern, but you must be flexible to work any shift. Some shifts may rotate so flexibility is required. DAYS: 06:45am - 15:00pm (Mon - Thur) 6.45am- 12.45pm (Fri) BACKS: 14:45pm - 23:00pm(Mon - Thur) 10.45am - 16.45pm(Fri) NIGHTS: 22:45pm- 07:00am (Mon - Thur) 16.30pm - 22.30pm (Fri) Responsibilities: Build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure Some manual lifting Attention to detail Focus on safety and quality Requirements: Previous experience of MIG, MMA Time Served Relevant NVQ Level 3 qualification Benefits: Overtime Off every other Friday On site occupational health and Physio Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app which offers you access to a huge range of discounts and savings available at much loved high street stores, supermarkets, restaurants, cinemas, DIY stores, coffee shops and more. Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader! £150 trade test payment if you pass and start on assignment with us! "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
Fabricator / TIG WELDER Letchworth Garden City £Competitive Salary Overtime Long-Term Stability Are you a skilled Fabricator who takes pride in producing high-quality bespoke products? We are partnered with a businesslooking for an experienced TIG Welder/Fabricator to join their growing team in Letchworth Garden City click apply for full job details
Aug 04, 2026
Full time
Fabricator / TIG WELDER Letchworth Garden City £Competitive Salary Overtime Long-Term Stability Are you a skilled Fabricator who takes pride in producing high-quality bespoke products? We are partnered with a businesslooking for an experienced TIG Welder/Fabricator to join their growing team in Letchworth Garden City click apply for full job details
TIG Pipe Welder Temp to Perm Opportunity Location: Dundee Pay Rate: Up to £21.00 per hour Contract: Temporary to Permanent (8-week temporary period with permanent position available) We are currently recruiting for an experienced TIG Pipe Welder to join our clients team based in Dundee click apply for full job details
Aug 04, 2026
Full time
TIG Pipe Welder Temp to Perm Opportunity Location: Dundee Pay Rate: Up to £21.00 per hour Contract: Temporary to Permanent (8-week temporary period with permanent position available) We are currently recruiting for an experienced TIG Pipe Welder to join our clients team based in Dundee click apply for full job details
