1246 jobs found

Quality Inspector 6 month contract Based in Portsmouth Offering 35ph Inside IR35 Do you have experience working to quality standards such as ECSS-Q-ST-70-08, 28, 38, 61? Do you have experience performing design and integrity verification inspections on flight hardware and test set-up? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Ensure conformity of production and test operations within the Cleanroom in accordance with Plans, Processes and Procedures for Space Equipment production, to approved quality standards in particular ECSS-Q-ST-70-08, 28, 38 or ECSS-Q-ST-70-61 Responsible and accountable for the correct "as built as design" validation Responsible for the environmental and H&S control of assembly, integration & test activities in accordance with the appropriate standards Support Key Inspection Points (KIPs) for the physical inspections Monitor and drive workmanship standards and clean room practices/processes Perform design and integrity verification inspections on Flight Hardware and Test set-up in accordance with inspection criteria in addition to ECSS-Q-ST-70-08, 28, 38, or ECSS-Q-ST-70-61 Identify and record non-conformities and investigate with manufacturing engineering, PA, M&P/Process Owner Support Root cause analysis of non-quality events Perform internal audits on cleanroom activities as directed by Equipment Quality group Complete QVP verifications as directed by Equipment Quality Assurance group Support specific operational tasks such as critical move, Ready for Test process activities and flight packing Ensure work environment in cleanroom is compliant with Health & Safety policy and any risks are mitigated Perform documentation checks, paperwork completion, and approval of reworks Control and maintenance of quarantined Equipment If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Quality Inspector 6 month contract Based in Portsmouth Offering 35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Mobile Commercial Gas Engineer Location: South East London (Mobile) Salary: 52,000 per annum + Company Van & Fuel Card Working Hours: Monday - Friday (Standard Day Shift) About the Role We are seeking an experienced Mobile Commercial Gas & FGAS Engineer to cover commercial sites across South East London. In this role, you will be responsible for planned preventative maintenance (PPM), reactive repairs, and fault finding across commercial heating, boiler plant rooms, and air conditioning/HVAC systems. Key Responsibilities Planned & Reactive Maintenance: Carry out routine PPMs, servicing, and reactive breakdown repairs on commercial heating systems, boilers, water heaters, and AC equipment. Diagnostics & Fault Finding: Inspect, troubleshoot, and repair mechanical plant room issues and refrigeration/HVAC circuits efficiently. Compliance & Safety: Ensure all work adheres to Gas Safe regulations, F-Gas compliance standards, and British Safety regulations. System Testing: Perform gas tightness testing, flue gas analysis, and complete digital job sheets via CAFM / mobile software. Client Engagement: Act as a professional technical point of contact for on-site facility managers and building owners. Requirements & Qualifications Essential Qualification / Skill Details Commercial Gas Certification Valid ACS Commercial Gas tickets (COCN1 / CODNCO1, CIGA1, CORT1, CDGA1, ICPN1) F-Gas Certification Category 1 F-Gas (City & Guilds 2079 / CITB) Driving Licence Full UK Driving Licence (clean or low points) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Accounts Assistant Ashby-de-la-Zouch c 38,000 p.a. Depending on Experience 1 day per week working from home considered after successful completion of probation Do you have a solid understanding of double-entry bookkeeping and enjoy supporting a busy finance function? Are you looking for a varied role that combines finance responsibilities and office administration? Do you thrive in a fast-paced environment where organisation, accuracy and adaptability are key? The Company: ER Recruitment are delighted to be partnering with Bluesky International, a Woolpert Company, a leading global architecture, engineering and geospatial consultancy, to recruit an Accounts Assistant. This is a fantastic opportunity to join a collaborative finance team supporting the UK business, whilst working within a global organisation. The role offers a varied mix of finance and office coordination responsibilities, making it ideal for someone who enjoys rolling up their sleeves, supporting colleagues and ensuring the smooth day-to-day running of the office. Role & Responsibilities of the Accounts Assistant: Accounts: Daily reconciliation of bank account and posting cash receipts/payments, maintaining Excel cash forecast spreadsheet. General debt chasing/credit control. Raise purchase orders and code to the appropriate general ledger account. Match purchase invoices to purchase orders, circulate for approval and process onto the purchase ledger. Prepare purchase ledger payment runs for approval and set up payments within the banking system. Manage company credit cards, expenses & petty cash and post to the general ledger. Post payroll journal and other routine journals in preparation for month-end. Reconcile key control accounts including bank and purchase ledger etc. Support month-end close activities, preparing information through to trial balance. Maintain bookkeeping records for the company trade body on an Excel spreadsheet. Create subscription and sponsorship invoices as required. Occasional administrative support alongside the wider team, including answering incoming calls and welcoming visitors, maintaining the electronic visitor registration system, managing incoming and outgoing post, ordering stationery and office supplies, and coordinating building maintenance requirements with external contractors. About You as the Accounts Assistant: Experience within an Accounts Assistant, Finance Assistant, Accounts Administrator or similar finance support role. A sound understanding of double-entry bookkeeping and experience working through to trial balance. AAT qualified/studying or equivalent practical bookkeeping experience would be advantageous. Confident using accounting software (Microsoft Dynamics 365 and/or Sage experience would be beneficial). Strong Microsoft Excel skills and confidence learning new systems. Highly organised, methodical and able to prioritise a varied workload. Logical thinker with excellent attention to detail. Adaptable and comfortable working in a changing environment. Strong communication skills with a proactive, team-focused approach. Please note by applying for this role you give consent for ER Recruitment to retain your CV for up to 24 months for the purposes of assisting you to find your next role unless you notify us otherwise. While we aim to get back to all applicants, if you do not receive a response within 7 working days then unfortunately your application has been unsuccessful on this occasion. We are here to help with your career so please send a copy of your CV to us. If you know of anyone else who is looking for their next opportunity, please feel free to refer them to us or pass on our details. We look forward to hearing from you.

Our client, a leading manufacturer based in South Oxfordshire, is looking for an organised and proactive Health & Safety Administrator to join their Quality team. This is a varied and rewarding role supporting Health & Safety, Quality and Facilities across the business. You'll play a key part in ensuring compliance, maintaining accurate records and driving continuous improvement within a busy manufacturing environment. Key Responsibilities . Maintain Health & Safety records, compliance registers, planners and documentation. . Coordinate inspections, servicing schedules, audits and statutory compliance activities. . Support the preparation and maintenance of risk assessments, COSHH assessments, RAMS and safe systems of work. . Arrange contractor visits, issue permits to work and maintain contractor compliance documentation. . Assist with Health & Safety training, toolbox talks and workplace inspections. . Produce reports, meeting minutes and Quality, Health, Safety and Facilities (QHSF) documentation. . Support ISO 9001 quality management processes and continuous improvement initiatives. About You To be successful in this role, you will ideally have: . Previous experience in a Health & Safety, QHSE or Compliance Administration role. . Experience working within a manufacturing or engineering environment. . A good understanding of the Health & Safety at Work Act 1974 and current Health & Safety legislation. . IOSH Managing Safely qualification (or higher), or an equivalent Health & Safety qualification. . Strong administration skills with excellent attention to detail and the ability to manage multiple priorities. . Strong Microsoft Office skills, including Excel and SharePoint. . Excellent communication and organisational skills with the confidence to work across different departments. If you're an experienced administrator with a passion for Health & Safety and compliance and are looking to develop your career within a well-established manufacturing business, we'd love to hear from you. For information on how we collect, store and process your personal data, please refer to our GDPR Privacy Policy on The Recruitment Group website

IT Roaming Engineer - Field-based Tailor Made Technologies, Whiteley (On-site) Overview of the role We are recruiting for a Roaming Engineer to join our large, supportive team of Outsourced Engineers. As one of our Outsourced team members you will support a wide range of customers needs onsite and from our head office in Whiteley. You will provide excellent and prompt technical customer support and will represent Tailor Made Technologies in a professional and courteous manner. This role would suit an experienced 2nd/ 3rd Line Engineer who wants to progress onto their next steps, or a Field Engineer who wants a company where you aren t just a number but a valued member of our team. Benefits of working for Tailor Made Technologies: A competitive salary and company car Training opportunities set out with a clear training structure Progressive working environment with access to voice your opinions to decision makers 25 days holiday plus bank holidays Your birthday off Flexi health plan cover and access to a range of Health Benefits IT purchasing scheme Company pension An active Social Committee who plan monthly competitions and events A brilliant breakout room with free breakfast and a pool table Join a Trusted Partner for Transformative Managed Technology Experts in Managed IT, Cyber Security and Communications solutions, Tailor Made Technologies (TMT) is on a mission to help small and medium-sized enterprises leverage business technology to achieve their goals. Partnership-focused with a deep and deliberate understanding of customers strategic goals, our in-house teams tailor our services to suit every client s unique requirements and drive business growth. Through comprehensive offerings, broad technical knowledge and excellent customer service, we ensure your business-critical IT and Communications systems work seamlessly in the background, unleashing you to fulfil your targets. Duties and responsibilities of our Roaming Engineer: Responsible for provision of second line technical support to the customer. Ensure IT Roaming Engineer calendar bookings are followed in line with Onsite Engineering requirements. Identify areas of improvement and make recommendations to appropriate parties. Use of Tailor Made software to manage, monitor and respond proactively to customer incidents. Ensuring customers are kept informed regarding on-going tickets and effective communication is delivered to the business. Achieving agreed and contracted SLAs. In line with ISO standards, ensure that all processes, procedures and documentation are maintained and updated where appropriate in line with company procedures. Working with 3rd parties to provide incident support through to resolution with customer specific applications. Support the Technical Resource Operations Manager, Account Manager, Service Desk Manager and Project Engineers with infrastructure upgrades, maintenance and renewals. Undertake equipment builds and installations as and when required. Ensure all activities are aligned with ITIL procedures. Any other ad hoc duties as and when required. Your previous experience: Experience with a service desk ticketing system If you have experience in any of the below, we d like to hear from you (not all required): Windows Desktops configuration and support experience Windows Server configuration and support experience Office 365 support experience Microsoft Exchange configuration and support experience Active Directory configuration and administration VMware support experience Citrix support experience Strong networking skills ITIL knowledge Essential Skills: Excellent communication skills Organisational skills Results driven with a proven track record of achieving Team player Self-motivated and proactive Ability to be resilient and to work under pressure

Temporary Administrator Immediate Start Essential Full-Time Monday to Friday Location: Medway City Estate, Rochester Company: CC Cousins Salary: 26,500 per annum equivalent / hourly rate depending on experience Temporary Position About the Role CC Cousins is looking for a Temporary Administrator to join our busy and friendly office team. This is a varied administrative role supporting our engineers, Contracts Manager and wider operations team. You will play an important part in keeping jobs moving, ensuring engineers have the information and materials they need, maintaining accurate records and keeping track of works being completed for our clients. This would suit someone who is organised, practical, confident using IT and able to manage several tasks at once in a busy working environment. Key Responsibilities Provide day-to-day administrative support to engineers and the Contracts Manager Assist with the planning and coordination of engineer workloads Keep track of client works and ensure jobs are progressing as required Update internal systems and records with accurate job information Monitor outstanding works and follow up with engineers where necessary Assist with raising and updating jobs on our Job Logic CRM/CAFM system Maintain accurate records of completed and outstanding works Manage and maintain inventory records, including stock levels and materials Track materials and equipment issued to engineers Assist with ordering materials and ensuring engineers have the equipment required for their jobs Liaise with suppliers, engineers, clients and subcontractors when required Assist the Contracts Manager with general administration and reporting Prepare spreadsheets, reports and other documentation Monitor emails and respond to enquiries in a professional and timely manner Help ensure client works are kept up to date and completed within required timescales General office administration and other duties to support the operational team About You We are looking for someone who is reliable, organised and proactive, with the ability to work in a busy environment where priorities can change throughout the day. You will ideally have: Previous administration experience Good written and verbal communication skills A confident and professional telephone manner Good knowledge of Microsoft Office, particularly Excel, Outlook and Word The ability to maintain accurate records and work with spreadsheets The confidence to communicate with engineers, managers, suppliers and clients The ability to prioritise workload and meet deadlines A practical and common-sense approach to problem solving The ability to work independently while also being a strong team player Experience within facilities management, construction, engineering or a similar operational environment would be advantageous but is not essential. About CC Cousins CC Cousins is an established facilities maintenance company providing a wide range of reactive, planned and project maintenance services to commercial and retail clients across the South of England. Our teams cover multiple trades and services, including electrical, plumbing, drainage, building fabric, civils, grounds maintenance and small works. If you're organised, reliable, hardworking and enjoy being part of a busy team, we'd love to hear from you. Apply today to join CC Cousins as a Temporary Administrator.

Our client is a national multi-service provider delivering electrical, drainage, pumping and lighting solutions across the UK. The Group is rapidly expanding and includes a dedicated Renewables Team delivering end-to-end low-carbon solutions for commercial, industrial and public sector clients. The Renewables Team delivers: • Solar PV design & installation (roof and ground mount) • Battery Energy Storage Systems (BESS) • EV charging infrastructure (commercial and fleet) • Grid connections and power upgrades (LV/HV via delivery partners) • Operations & maintenance (O&M), monitoring and performance optimisation • Energy efficiency and compliance-led electrical works supporting decarbonisation This Contracts Manager (Renewables) role is central to ensuring excellent customer experience, strong commercial control, and effective coordination between clients, delivery teams and project managers. Home locations to include Kent, Milton Keynes, Bedfordshire, Luton, Cambridgeshire & Essex Location: Office-based with hybrid working and regular travel to client sites across the UK. The role of a Contracts Manager To own the day-to-day commercial and customer management of renewables contracts, ensuring accurate quoting, timely resolution of escalations, and clear communication between customers, the delivery team and project managers. The Contracts Manager will act as a trusted advisor to existing clients, identifying and developing organic opportunities that improve asset performance, reduce risk and expand Metcor s scope of work. Main duties Manage a portfolio of renewables clients, acting as the primary point of contact for commercial and operational queries. Produce and issue quotations for variations, remedials, additional works and lifecycle upgrades (PV, BESS, EV, electrical enabling works). Coordinate internally with project managers, engineering, procurement and subcontractors to build technically accurate and commercially robust quotes. Own escalation management: investigate issues, agree corrective actions, and ensure clear and timely communication to customers. Ensure smooth handover from quote to delivery, including scope, programme, access requirements, H&S documentation and customer expectations. Monitor contract performance (financial and operational), supporting governance, reporting and action tracking. Identify and develop organic growth opportunities within existing accounts, positioning Metcor as a trusted advisor. Support pricing strategy and margin protection by maintaining accurate cost build-ups, risk/assumption registers and approval workflows. Maintain accurate CRM and contract records, ensuring all client communications, quotes and actions are auditable and traceable. Essentials Proven experience in a contracts management, commercial, or account management role within renewables, M&E, electrical, utilities or FM environments. Strong track record producing accurate, timely quotations, managing variations/change control and supporting prompt invoicing/close-out. Excellent stakeholder management skills, confident handling customer and supplier escalations and resolving issues professionally. Strong commercial awareness: understanding of margins, risk, scope control, contractual obligations and performance reporting. Experience collaborating with delivery teams and project managers to manage programmes, access/outages, dependencies and customer expectations. Disciplined documentation and record keeping (contract files, quotes, approvals, meeting notes, action logs) with audit-ready standards. Competent with Microsoft 365 (Excel, Word, Outlook) and CRM systems. Full UK driving licence. Technical requirements Working knowledge of renewables project and O&M activities (e.g., PV, BESS, EV) and typical operational, warranty and compliance considerations. Understanding of contract delivery models and commercial terms (scope, assumptions, exclusions, SLAs/KPIs, variations and change control). Confidence reviewing technical reports and translating findings into customer actions (e.g., remedials, lifecycle replacement, optimisation upgrades). Experience coordinating subcontractors/suppliers (rates, scope, performance, and resolution of defects/issues). Working knowledge of site documentation and safe systems of work (RAMS, permits, site inductions, incident reporting) as applicable. Desirable: familiarity with common forms of contract (e.g., NEC / JCT / FIDIC) and principles of early warnings, compensation/change events, and dispute avoidance. Training & Certifications Contract and commercial management training (formal or on-the-job). Customer service and escalation management training. QHSE training (RAMS awareness, incident reporting, and safe systems of work). Desirable: NEC/JCT/FIDIC short course and/or renewables awareness training (PV / BESS / EV / O&M). Key Responsibilities 1. Customer & Account Management Be the day-to-day contact for a defined portfolio of renewables customers, managing expectations and service experience. Build trusted relationships with client stakeholders (operations, estates, energy, procurement) and maintain a clear communication cadence (updates, actions, and reporting). 2. Quoting, Variations & Commercial Control Prepare and submit quotations for additional works, remedials, call-off tasks and upgrades, ensuring clear scope, assumptions and exclusions. Secure internal approvals in line with delegated authority and protect margin through accurate cost build-ups. Maintain disciplined change control from quote to order to completion, ensuring variations are correctly recorded and invoicing-ready. 3. Escalations & Issue Resolution Own customer and supplier escalations end-to-end, coordinating investigations and corrective actions with project managers and delivery teams. Communicate clearly with clients on status, next steps, and timeframes; reset expectations where required. Capture lessons learned and implement preventative actions to reduce recurrence and protect client satisfaction. 4. Communication with Delivery Teams & Project Managers Ensure effective handover of scope, programme, constraints and customer requirements from commercial to delivery. Facilitate internal coordination and governance (actions, risks, and decisions) to keep works on track and communications consistent. Support project managers with customer-facing updates, documentation and contractual correspondence. 5. Organic Growth & Trusted Advisor Approach Proactively identify opportunities within existing contracts (e.g., remedials, lifecycle replacements, additional sites, monitoring improvements, capacity upgrades). Use client insight, performance data and operational feedback to propose value-led solutions and new scopes of work. Support renewals and retention by ensuring high-quality service, transparent communication and consistent delivery. Common requirements End-to-end contract administration: maintaining accurate contract/job files, documentation for handover and invoicing, and auditable records of communications and actions. Strong customer and stakeholder management: interpreting requirements, providing clear updates, attending meetings, and maintaining long-term relationships. Escalation/complaints handling: ownership of issues through to resolution, with professional communication and clear corrective actions. Change control and variations: disciplined management of changes from identification/notification through quotation, approval, delivery and commercial close-out. Supplier/subcontractor interface: coordinating performance, negotiating rates/terms where required, and resolving defects or delivery issues. Commercial and performance governance: tracking costs/margins, contract KPIs/SLAs, and producing routine performance reporting. Contract form awareness (often NEC/JCT/FIDIC depending on client type): understanding early warnings, change events/variations, and dispute avoidance principles. H&S and compliance documentation expectations: supporting safe systems of work (RAMS) and site/client requirements alongside delivery teams. Required qualifications and attributes: Customer-first mindset with the confidence to lead difficult conversations and resolve issues. Commercially minded, disciplined with scope control, and comfortable balancing risk, margin and service. Highly organised with strong attention to detail and follow-through. Strong communicator who can work effectively with engineers, project managers and senior client stakeholders. Proactive and solutions-led, with a desire to improve processes and grow accounts organically. Key Objectives in first 12 months Take ownership of assigned client portfolio, establishing clear communication routines and stakeholder maps. Deliver consistent, accurate quoting with robust scope definitions and strong conversion rate from quote to order. Reduce response time and improve resolution quality for escalations through structured triage and action tracking. Improve internal handover quality between commercial and delivery functions, reducing rework and customer dissatisfaction. Generate measurable organic growth within existing clients by identifying and converting additional scope opportunities. KPIs . click apply for full job details

Service Administrator Monday to Friday 8.30 to 5.30pm 30,000 to 32,000 depending on experience Join a busy and supportive Service team where you'll play a key role in delivering excellent customer service and keeping operations running smoothly. We're looking for an organised and customer-focused Service Administrator to support our growing Service team. This is a fantastic opportunity for someone who enjoys variety, thrives on building relationships, and takes pride in providing first-class administrative support. As a key member of the team, you'll support customers, engineers and internal departments, helping to ensure the efficient day-to-day running of the service operation. From managing service contracts and invoicing to resolving customer queries and coordinating maintenance schedules, you'll be at the heart of the business. What you'll be doing Processing service administration, including raising invoices and credit notes across multiple customer sectors. Managing and resolving invoice queries efficiently and professionally. Uploading invoices and supporting documentation to customer portals. Producing customer and internal reports as required. Managing monthly key account invoicing and maintaining accurate customer asset lists. Handling incoming telephone calls from customers and colleagues, providing a professional and helpful service. Administering service contracts, including preparing quotations for new contracts and renewals. Following up on contract opportunities and equipment approaching the end of its warranty. Coordinating and managing planned maintenance visit schedules. Supporting the wider Service Administration team with day-to-day operational activities. Providing scheduling support during busy periods and holiday cover. What we're looking forYou'll be someone who enjoys working in a fast-paced environment and takes pride in delivering excellent customer service. You'll also have: Previous experience in an administrative or service support role. A strong customer service focus with excellent written and verbal communication skills. Confidence in solving problems and finding practical solutions. The ability to manage multiple priorities while maintaining accuracy. Experience working in a KPI and SLA-driven environment. The ability to work well under pressure and meet deadlines. Excellent organisational skills with strong attention to detail. A positive, team-oriented approach. Strong Microsoft Office skills, particularly Excel. Experience using SAP and CRM systems is highly desirable. What you'll receive The opportunity to join a well-established and growing organisation. A supportive and collaborative team environment. Ongoing training and development opportunities. A varied role where no two days are the same. Opportunities for career progression for the right candidate. Excellent benefits. Apply now If you're an organised administrator with excellent customer service skills and enjoy working as part of a busy team, we'd love to hear from you. Please submit your CV.

At Safran Electrical & Power, we recognise that aviation needs to innovate and change in order to protect our environment. We believe that future aircraft power systems will be hybrid-electric or full-electric, which is why we are working to develop and deliver advanced electrical solutions to help decarbonise flight. If you want to help deliver this future, we are looking for enthusiastic and creative people to join our team. The UK Safran Electrical & Power team has expertise in designing and developing electrical systems comprising generators, power conversion, distribution and control, with developing expertise in electric motors for aircraft propulsion. SMS Manager Pitstone, Buckinghamshire Hybrid Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision The SMS Manager role is a nominated post holder for all of Safran Electrical & Power UK Ltd's approvals under UK CAA & EASA Part 21J (Design), P21G (Production) & Part 145 (Maintenance) and takes responsibility for Pitstone and Twinsburg's Safety Management System (SMS). The SMS Manager's priorities are to develop, supervise and maintain compliance of the safety management processes and procedures within the organisations Safety Management System (SMS). The SMS Manager is also seen as the facilitator for changes necessary to effect safety and airworthiness across the organisation. Full implementation of an SMS across both Safran Electrical & Power sites (Pitstone & Twinsburg); Promote safety awareness within the two organizational sites; Ensure that safety management has the same or higher priority level throughout both organisations as any other management and operational processes; Implementation of a standardized process for embedding demonstration of compliance with airworthiness requirements across all projects across both sites; Facilitating training to increase awareness of airworthiness issues across both sites Manage all aspects of the organisations SMS, including full development and implementation of a SMS across Safran Electrical & Power (Pitstone and Twinsburg); Monitoring the effectiveness of SMS; Initiating corrective actions when necessary; Providing safety reports on SMS performance on periodic basis; Providing safety advice to top management and proposing corrective actions on safety related-issues as needed; Ensuring that safety-related documentation and records are available and up-to-date via Coordination of the weekly PIC meetings. Monitor the reliability of SEP products and ensure actions are taken to correct any potential impairment of airworthiness safety. Collate, coordinate and analyse all occurrence reports from across both sites. Main coordinator with the authorities for MOR's. Providing safety advice and mentoring to management, staff and contractors. Maintaining a safety reporting system to identify and manage safety related hazards and risks. Investigating or coordinating the investigation of accidents and incidents. Identifying and often facilitating ongoing staff training to support SMS objectives. Overseeing internal and external safety audit programs. Maintaining the company's emergency response plan. Promoting general safety awareness and the development of a healthy safety culture within the company. Providing management with data to assess the performance of the SMS and areas where improvement is required. Professional Skills: MS office proficiency and engineering related tools Organization and Project Management Extensive UK CAA / EASA Part 21J (Design), Part 21G (Production) & Part 145 Maintenance regulatory requirements Good skills for quality issues investigation, audit, analysis and correction / prevention Ability to interpret a variety of instructions in written, oral, diagram or schedule form Good skills to coordinate issues with operations and other areas MEDA safety investigator (or equivalent) Lead Auditor trained Train the Trainer trained Behavioral Skills: Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists Must have the ability follow up actions effectively Ability to manage multiple tasks Good leadership, initiative and execution Ability to convince, accept responsibility, adaptability-flexibility

Job Title: Mobile Fabric Maintenance Engineer Location: NW London (covering various static sites) Salary: Up to 42,000 per annum + Company Van & Fuel Card Working Hours: Monday - Friday, Standard Business Hours Are you an experienced Fabric Maintenance Engineer looking for a stable, mobile role with a guaranteed client base Key Responsibilities Carry out routine fabric maintenance, minor repairs, and reactive works across designated facilities in NW London. Perform basic carpentry, door/lock repairs, painting, decorating, basic plumbing, and minor tiling/plastering. Ensure all work meets strict health, safety, and compliance standards within operational emergency service buildings. Manage job tickets via a mobile device, keeping clear records of completed work and ordering necessary materials. Requirements Proven experience as a Fabric Engineer, Handyperson, or Multi-Skilled Technician in a commercial or mobile environment. Relevant trade qualification (e.g., NVQ Level 2/3 in Carpentry, Plumbing, or Painting) or time-served equivalent. Full UK Driving Licence (essential for van usage). Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Are you an experienced Building Surveyor or Project Surveyor looking to manage a diverse portfolio of capital investment projects while making a real difference to customers' homes? We're looking for an Asset Delivery Surveyor to join a forward-thinking Property & Place team, delivering planned investment programmes and capital projects across a varied housing portfolio. This is an excellent opportunity to manage projects from inception through to completion while working with contractors, consultants and customers to deliver high-quality homes and outstanding customer service. About the Role Reporting to the Asset Delivery Manager , you'll take responsibility for delivering planned investment and capital works projects, ensuring schemes are completed safely, on time, within budget and to the highest quality standards. Working across multiple projects, you'll oversee contractors on site, monitor performance and ensure full compliance with statutory and regulatory requirements. Key Responsibilities Manage capital investment and planned maintenance projects from inception through to final account. Prepare specifications, schedules of work and tender documentation. Carry out site inspections to monitor quality, programme, safety and compliance. Manage contractors, consultants and supply chain partners to deliver excellent project outcomes. Monitor project budgets, valuations, variations and payment certificates. Ensure compliance with CDM Regulations, Building Regulations, Planning requirements, Party Wall legislation and asbestos regulations. Produce project reports, monitor KPIs and provide accurate performance information. Work closely with customers, leaseholders and residents, ensuring excellent communication throughout project delivery. Resolve technical issues and provide professional advice to internal and external stakeholders. Support continuous improvement and collaborative working across the Property & Place team. About You We're looking for someone who has: Experience managing planned maintenance, capital investment or refurbishment projects. Strong project management skills within housing, construction or property. Experience writing specifications, tender documentation and managing contractors. Knowledge of Building Regulations, CDM Regulations, Party Wall legislation and Health & Safety requirements. Excellent communication and stakeholder management skills. Strong financial awareness with experience managing project budgets and delivering value for money. Excellent report writing, IT and analytical skills. HNC/HND (or equivalent) in Building Surveying, Construction, Quantity Surveying or a related discipline. SMSTS (or equivalent) is desirable. Full UK Driving Licence and access to a vehicle for business use. What You'll Receive Salary of £43,839.56 SMART working with flexible working arrangements Varied and interesting capital investment projects Professional development opportunities Supportive team environment Opportunity to make a real impact on customers and communities To apply please submit your CV or contact Harvey Baker for more information on

ABOUT THE ROLE As a Head of Maintenance at a Barchester care home, you'll make sure we have a clean and well-maintained environment so that residents feel at home and staff can do their jobs well. Creating a warm and welcoming atmosphere is part of our commitment to delivering first-class care and support. You can expect plenty of variety as a Head of Maintenance with us. You'll turn your hand to all sorts of tasks within the care home building as well as in the gardens and grounds. That could mean fixing a leaky tap one minute and planting some new bulbs the next. You should be comfortable working alone, leading a team and supporting the General Manager with annual budget planning. We'll also need you to liaise with contractors on jobs that fall outside the expertise of your team. ABOUT YOU The wellbeing of our residents will be your number one priority as a Head of Maintenance at Barchester you'll make sure all work is carried out with sensitivity to their needs. With hands-on experience of property maintenance, you'll have at least one trade skill and, ideally, a proven ability to undertake a wide range of maintenance tasks. You should be reliable and flexible when it comes to your working hours. This role also calls for a full UK driving licence, IT literacy and GCSEs in Maths and English (or equivalent). REWARDS PACKAGE In return for your dedication, you'll receive a competitive rate of pay plus our sector-leading benefits and rewards package including: Free training and development for all roles Access to wellbeing and support tools A range of retail discounts and savings Unlimited referrals with our Refer a Friend' bonus scheme Employee of the Month' rewards and Long Service Awards' And so much more! If you'd like to use your maintenance and people skills in an organisation that provides the quality care you'd expect for your loved ones, this is a rewarding place to be.

Are you looking for a hands-on, site-based role where safety, reliability and practical problem-solving make a visible difference every day? UK Power Networks Services is looking for a Substation Inspector to join our team based from Gatwick, supporting the safe inspection, maintenance and care of substations across the Services region. Reporting to the Site Supervisor, you will work within the UKPN Services directorate as a permanent employee. This role offers a salary of 38,832 plus a 3% bonus. As the work is required to be carried out on site, blended working is not available. The closing date for applications is 28/07/2026. You will play an important role in the safe delivery of the Inspection and Maintenance Programme, working either as part of a team or independently across the Services geographical area. The role involves carrying out the full range of tasks associated with substation inspections and vegetation management at substation voltages up to 33kV, helping to keep critical infrastructure safe, compliant and operational. You'll work as part of a team or as a lone worker, in the Services geographical area, carrying out the full range of tasks associated with Substation Inspections and vegetation management at substation voltages up to 33kV. Your duties will include inspection and non-intrusive diagnostic testing of all plant and apparatus associated with the HV and LV distribution network, fault location and repair of minor plant defects, taking oil samples where required for diagnostic testing from HV plant, and using hand-held IT equipment to capture and manage information. You will demonstrate a safety culture that embraces the UKPNS Stay Safe programme, oversee maintenance, project and subcontract staff within your working party, assist the team with maintenance and project-based work, and be prepared to support other sections during organisational changes, system emergencies or other operational needs in line with your experience. You will also clean substation internals, including plant and apparatus associated with the HV and LV distribution network under UKPN Services' guardianship. This will include dusting, sweeping, vacuuming, mopping and cleaning internal windows, completing additional site visits to meet ESQC Regulations, carrying out HV and LV meter reading, pruning or removing vegetation from external substation compounds by manual, mechanical or chemical control, and undertaking touch-up redecoration tasks within substations. You will be safety-focused, enthusiastic, willing to work as part of a team or independently, and keen to learn and develop new techniques. Any company-specific training required for the role will be provided. If you are ready to take on a practical, safety-critical role supporting essential electrical infrastructure, we would like to hear from you. Apply by 09/08/2026 to be considered for the Substation Inspector opportunity at UK Power Networks Services.

Repairs Planner Location: North West London Salary: 17 per hour Hours: 42.5 hours per week Contract: Temp to Perm We are currently recruiting for an experienced Repairs Planner to join a busy Property Services team based in North West London , with the opportunity to become permanent. The Role As a Repairs Planner, you will be responsible for coordinating repairs and maintenance works, ensuring jobs are scheduled efficiently and residents receive a high level of service. Key Responsibilities Planning and scheduling repairs and maintenance works Allocating jobs to operatives and contractors Managing engineers' diaries and workloads Liaising with residents, operatives and internal teams Responding to queries and providing updates on repairs Monitoring outstanding jobs and ensuring works are completed within required timescales Updating internal systems and maintaining accurate records Prioritising urgent and emergency repairs where required About You The ideal candidate will have previous experience working within repairs planning, scheduling or property maintenance , ideally within social housing or a similar environment. You will be organised, confident communicating with different stakeholders and able to work effectively in a fast-paced environment. This is a fantastic opportunity to join a well-established team on a temp-to-perm basis. Apply today to find out more.

API/Integration Developer - SC Cleared 7 months London / Hybrid - 2-3 days per week on site 550 Pay per day (Inside IR35) Please note - Due to the nature of the role and the client, the selected candidate MUST HAVE ACTIVE SC Clearance The Role We are currently looking for a Senior API/Integration Developer to join a major public sector technology programme on an initial 7-month contract. This is a hands-on development role focused on delivering bespoke integrations between internal systems, cloud platforms and third-party applications. The ideal candidate will have strong experience across Azure and C#/.NET , alongside a proven background in developing and supporting complex integration solutions. Candidates with strong integration experience using Python or other comparable programming languages will also be considered. Key Responsibilities Design and develop bespoke integration solutions between multiple systems and platforms. Develop and maintain integrations with third-party applications and services. Build and support cloud-based solutions using Microsoft Azure . Develop integration components and applications using C#/.NET or another suitable programming language. Work with APIs, web services and other integration technologies. Troubleshoot and resolve complex integration and application issues. Work closely with developers, architects, technical teams and stakeholders to deliver integration solutions. Contribute to technical design, documentation and development standards. Support testing, deployment and ongoing maintenance of integration services. Ensure solutions are secure, scalable, reliable and maintainable. Essential Skills & Experience Active SC Clearance . Strong commercial experience in bespoke systems integration . Proven experience integrating systems with third-party applications/services . Strong Microsoft Azure experience. Strong development experience with C# / .NET or a comparable programming language. Experience working with APIs and web services . Good understanding of integration patterns and software development principles. Strong problem-solving and troubleshooting skills. Ability to work effectively within a collaborative Agile environment. Desirable Experience with Python . REST / SOAP APIs. Microservices and cloud-native development. Azure integration services. CI/CD and DevOps practices. Experience integrating legacy and modern systems. Experience working within large, complex or highly regulated organisations. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Job Title: Mobile A/C Engineer Location: South London (Static commercial sites) Salary: 45,000 + OT + Van & Fuel Card Hours: Monday - Friday On-Call: 1 in 5 rotation ( 100 standby allowance) Role Overview We are hiring a Mobile A/C Engineer to deliver maintenance and repairs across static commercial sites in South London. You will work extensively on splits, multi-splits, VRV/VRF systems, and VAV (Variable Air Volume) terminal units. Key Responsibilities Splits & Multi-Splits: Routine servicing, filter changes, leak checks, coil cleaning, and compressor diagnostics. VAV Units: Airflow balancing, actuator/damper troubleshooting, controller setup, and reheater coil maintenance. Commercial A/C Equipment: PPMs, fault-finding, major component replacement, and reactive repairs on VRV/VRF systems and air handling plant. Compliance: Complete F-Gas logbooks, maintain compliance records, and join the 1 in 5 call-out rota. Requirements NVQ Level 2/3 in A/C & Refrigeration + valid F-Gas Category 1 (2079). Strong hands-on experience with VAV boxes, splits, and commercial A/C systems. Full UK driving license and proximity to South London. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Quality Lineside Engineer - Nightshift 9 month contract Based in Broughton Offering 40.13ph Inside IR35 + Nightshift allowance Shift Times - 8:45pm - 6:00am Do you hold an NVQ Level 4 or equivalent? Do you have experience as a Quality Lineside Engineer? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Lineside Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. Some of what you will be involved in: Investigate and support the resolution of Non-Conformities (NCs), assembly anomalies, and production issues Provide technical analysis, documentation, and support for corrective and containment actions Create and manage Design Query Notes (DQNs), rework work orders, and outstanding work Identify production issues and coordinate with Engineering, Maintenance, Logistics, Quality, and other support functions Support continuous improvement, Lean, and waste elimination initiatives Support the development, modification, repair, and calibration of jigs, tooling, and industrial assets Manage blocked and priority work orders to minimise production disruption and lead-time impact Provide technical information including drawings, part references, tooling, and relevant documentation Support the implementation and adherence of Health & Safety, quality, and production standards on the shopfloor Identify and support the resolution of near misses and other EHS concerns Support prioritisation and delivery of materials required for rework activities Your skillset may include: NVQ Level 4 or equivalent Experience in a manufacturing, production, or engineering environment, ideally within aerospace or another highly regulated industry Strong technical problem-solving and analytical skills Ability to investigate issues and translate technical information into practical shopfloor solutions Good understanding of production processes, quality, and continuous improvement principles Experience working collaboratively across multiple functions and stakeholders Knowledge of Lean/Operational Excellence, NC management, SAP, or similar production systems would be advantageous If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Quality Lineside Engineer - Nightshift 9 month contract Based in Broughton Offering 40.13ph Inside IR35 + Nightshift allowance Shift Times - 8:45pm - 6:00am Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Are you an organised and customer-focused Helpdesk Administrator with experience in helpdesk, service desk, estimating, maintenance or facilities management? We are recruiting on behalf of a growing business in Bolton for a Helpdesk / Estimator Administrator to join their busy Helpdesk team. This is a varied role combining customer service, job coordination, administration and estimating, making it ideal for someone who enjoys being at the centre of day-to-day operations and managing multiple priorities Benefits: Salary up to £30,000 - may be some wiggle room for the right candidate Hours: Full-time, 40 hours per week 20 days annual leave + 8 bank holidays Free on-site parking Full-time, permanent position Opportunity to develop within a varied operational role Monday to Friday working hours The Role You will manage client requests from initial enquiry through to completion, coordinate engineers and subcontractors, prepare quotations and ensure jobs are accurately recorded and progressed. Key responsibilities include: Managing incoming client enquiries via telephone, email and helpdesk systems Logging, prioritising and allocating reactive maintenance jobs Preparing quotations and estimates for maintenance and construction works Liaising with clients, contractors, suppliers and internal teams Scheduling engineers and subcontractors Monitoring jobs against SLAs and client deadlines Raising purchase orders and maintaining accurate job costing information Producing work orders, reports and supporting documentation Maintaining accurate records of jobs, quotations, invoices and communications Providing customers with regular progress updates Supporting project managers and operational teams with administration Booking accommodation for field-based engineers Ensuring company procedures, quality and health & safety requirements are followed Skills/Experience required: We are looking for someone who is highly organised, commercially aware and confident dealing with customers and contractors.Pr Pevious experience within a helpdesk, service desk, estimating, maintenance or administration environment Experience using CAFM or job management systems Strong organisational and time-management skills Excellent telephone and written communication skills Strong attention to detail and accuracy Good Microsoft Office skills, particularly Excel, Outlook and Word A customer-focused approach The ability to manage multiple jobs and priorities in a fast-paced environment Experience within facilities management, construction, maintenance, property services or engineering would be advantageous. Desirable experience BigChange or another CAFM system Reactive and planned maintenance Preparing quotations or cost estimates Purchase orders, invoicing and job costing Subcontractor and supplier coordination If you are an organised Helpdesk administrator who enjoys coordinating work, dealing with customers and keeping jobs moving, we'd love to hear from you. Apply today for more information.

Position: Network Engineer Job ID: 2394/18 Location: Surrey Rate/Salary: To be confirmed by the recruiter Benefits: On-site gym at the HQ, 25 days holiday plus BH, Hybrid working after 6 months probation Type: Permanent HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors visit the HSB Technical website for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas. The job description below will outline this position: Network Engineer Typically, this person will be responsible for the design, build, maintenance, and support of secure networks for both internal teams and external customers. The role covers the full lifecycle of network management, from design through to commissioning and long-term support, while ensuring security, reliability, and performance standards are met. HSB Technical s client is an established and well-regarded business entity. Duties and responsibilities of the Network Engineer: Act as a subject matter expert for network design, management, and security. Lead the design, build, test, and commissioning of internal and occasional customer networks. Support, troubleshoot, and maintain complex network environments including Fortinet firewalls, Cisco routers/switches, VPNs, and VoIP QoS. Analyse logs, identify trends, and recommend network improvements. Maintain and update documentation, including configurations, schematics, and support guides. Provide 3rd line support for escalated network issues, often with tight deadlines. Liaise with internal teams and external stakeholders to ensure network integrity and service availability. Participate in on-call and out-of-hours support rota as required. Qualifications and requirements for the Network Engineer: Professional networking certifications such as FCSS/FCP and/or CCNA/CCNP (or equivalent). Minimum 5 years hands-on experience designing and managing networks. Strong technical knowledge of Fortinet Fortigate Firewalls, Cisco Routers/Switches, VPN, BGP, OSPF, IPSec, and VoIP QoS. Ability to obtain or hold DV Security Clearance. Strong organisational skills, proactive approach, and attention to detail. Excellent communication skills and the ability to support and train others. Desirable: experience with satcom, maritime communications, MPLS, 802.1x, multicast, Linux, Docker, and Python. This vacancy is being advertised by HSB Technical Ltd, who have been appointed to act as a recruitment partner for this role.

Job Role: JetVac Operator / Drainage Operator Location: Droitwich Spa, Worcestershire Salary: Up to £38,000 per annum (DOE) Contract: Permanent, Full-Time Hours: Monday to Friday, 08 30 (30-minute lunch break) Working Pattern: Working away Monday to Friday is a core requirement of the role, typically departing on Monday morning and returning on Friday. Overtime & Allowances: 1.5x hourly rate Monday to Saturday 2x hourly rate Sundays and Bank Holidays £20 per night working away allowance Patch lining bonus of £15 per patch after the first 5 patches completed Role Overview We are recruiting an experienced JetVac Operator / Drainage Operator to join a growing drainage solutions team based in Droitwich. This is a hands-on, field-based role supporting drainage and environmental projects across multiple sites throughout the UK. Working alongside CCTV Survey Teams, Patch Lining Engineers and Drainage Specialists, you will play a vital role in delivering high-quality drainage maintenance, cleansing and rehabilitation services. As a JetVac Operator , you will operate specialist Jet Vac equipment, support drainage repair works and ensure projects are completed safely, efficiently and to the highest standards. This position is ideal for someone with strong drainage experience who enjoys site-based work and is happy working away during the week. Key Responsibilities Drainage & JetVac Operations Operate JetVac equipment to support drainage maintenance and cleaning works Carry out drainage investigations, cleansing and jetting activities Maintain, service and inspect equipment in line with manufacturer guidelines Support drainage repair, patch lining and rehabilitation projects Assist CCTV and drainage survey teams where required Ensure works are completed safely, efficiently and in accordance with project specifications Health, Safety & Compliance Follow all RAMS, health & safety procedures and company policies Promote safe systems of work on all sites Ensure full compliance with environmental and waste management regulations Complete waste transfer, duty-of-care and compliance documentation accurately Report incidents, near misses and safety concerns appropriately Customer Service & Communication Build positive relationships with customers and site representatives Communicate effectively with operational management and project teams Provide updates on site progress and issues Represent the business professionally at all times Vehicle, Equipment & Documentation Complete daily vehicle and equipment inspections Maintain JetVac equipment in safe working order Complete job sheets, reports and operational paperwork accurately Ensure all equipment, PPE and tools are maintained and available for operational use Essential Criteria Class 2 HGV Licence Proven experience within drainage and jetting operations Strong understanding of RAMS and safe working practices Experience operating JetVac or similar specialist drainage equipment Good verbal and written communication skills Full UK driving licence Right to work in the UK Willingness to work away from home on a weekly basis Desirable Criteria Patch Lining experience UV Lining experience CCTV drainage surveying experience Environmental services or utilities background Confined Space certification High Pressure Water Jetting qualifications Personal Attributes Reliable and safety conscious Practical and hands-on approach Strong work ethic and attention to detail Flexible and adaptable to operational requirements Team player with a positive attitude Committed to delivering high standards of customer service Benefits Competitive salary and overtime opportunities Working away allowance Patch lining productivity bonus Ongoing training and development Career progression opportunities Opportunity to work within a growing specialist drainage team Additional Information Based from the Droitwich depot with travel to sites across the UK Regular overnight stays required Monday to Friday Overtime is a normal part of the role Role involves outdoor work in varying weather conditions Full PPE and specialist equipment provided How to Apply For more information or to apply for the JetVac Operator / Drainage Operator role, please contact: Robert Rowe on (phone number removed) or email (url removed)