ELECTRICAL TEST ENGINEER (EXPERIENCED LEVEL) Job Title: Electrical Test Engineer - Experienced Location: Dorset Department: Electrical Engineering/Test & Validation Reporting To: Lead Electrical Test Engineer/Head of Engineering 1. Job Purpose The Electrical Test Engineer (Experienced Level) is responsible for planning, executing, and analysing electrical and electronic test activities to validate the performance, safety, and compliance of aerospace and defence systems. The role provides strong technical capability in electrical testing, instrumentation, data acquisition, and test procedure development. The post holder will support the full test life cycle-from requirements definition and test planning through to execution, reporting, and certification-ensuring that electrical systems meet design intent, regulatory standards, and customer expectations. 2. Key Responsibilities 2.1 Test Planning & Preparation Develop detailed electrical test plans, procedures, and acceptance criteria based on system requirements. Define test setups, instrumentation requirements, and data acquisition configurations. Support the design and commissioning of electrical test rigs, harnesses, and interface equipment. Ensure all test documentation complies with internal standards and applicable regulations. Conduct risk assessments and ensure safe execution of all electrical test activities. 2.2 Test Execution & Data Acquisition Perform electrical tests including continuity, insulation resistance, power quality, load testing, functional testing, and environmental electrical testing. Install and configure electrical instrumentation such as multimeters, oscilloscopes, power analysers, and signal generators. Operate data acquisition systems and test control equipment to capture accurate and reliable data. Troubleshoot electrical issues, instrumentation faults, and test anomalies during execution. Ensure accurate recording of test conditions, observations, and deviations. 2.3 Data Analysis & Reporting Analyse electrical test data to verify compliance with design requirements and standards. Produce detailed test reports including plots, measurements, and engineering conclusions. Identify electrical failures, root causes, and corrective actions where required. Provide clear technical feedback to design, systems, and manufacturing teams. Support certification and compliance activities with robust electrical test evidence. 2.4 Engineering Support & Collaboration Work closely with electrical, systems, and manufacturing engineers to ensure test coverage aligns with design intent. Support prototype builds, harness manufacture, and integration activities with test-based insights. Assist in resolving electrical design issues through targeted test investigations. Participate in multidisciplinary design reviews and provide electrical test expertise. 2.5 Health, Safety & Quality Ensure all electrical test activities comply with UK Health & Safety legislation including HASAWA 1974. Promote safe working practices in laboratories, workshops, and test facilities. Embed quality and traceability into all test documentation and processes. Support audits, compliance checks, and continuous improvement initiatives. 3. Knowledge, Skills & Experience 3.1 Essential Degree in Electrical Engineering, Electronics Engineering, or related discipline. Experience conducting electrical testing in aerospace, defence, automotive, or similar high-integrity environments. Strong understanding of electrical systems, wiring practices, power distribution, and electronic components. Proficiency with electrical instrumentation and data acquisition systems. Ability to interpret electrical schematics, wiring diagrams, and technical specifications. Strong analytical skills with experience processing and interpreting electrical test data. Good communication skills and ability to work collaboratively across engineering teams. Working knowledge of quality management and configuration control processes. 3.2 Desirable Experience with environmental electrical testing (eg, DO-160, MIL-STD-461/810). Familiarity with aerospace or defence electrical standards and certification processes. Experience designing or commissioning electrical test rigs and harnesses. Knowledge of EMC considerations, grounding, shielding, and electrical safety. Experience with PLM or document control systems (eg, Windchill, Teamcenter, Vault). 4. Security Clearance This role is subject to UK Security Clearance requirements (BPSS, SC, or higher). The post holder must be eligible and able to obtain and maintain the required level of clearance.
May 15, 2026
Contractor
ELECTRICAL TEST ENGINEER (EXPERIENCED LEVEL) Job Title: Electrical Test Engineer - Experienced Location: Dorset Department: Electrical Engineering/Test & Validation Reporting To: Lead Electrical Test Engineer/Head of Engineering 1. Job Purpose The Electrical Test Engineer (Experienced Level) is responsible for planning, executing, and analysing electrical and electronic test activities to validate the performance, safety, and compliance of aerospace and defence systems. The role provides strong technical capability in electrical testing, instrumentation, data acquisition, and test procedure development. The post holder will support the full test life cycle-from requirements definition and test planning through to execution, reporting, and certification-ensuring that electrical systems meet design intent, regulatory standards, and customer expectations. 2. Key Responsibilities 2.1 Test Planning & Preparation Develop detailed electrical test plans, procedures, and acceptance criteria based on system requirements. Define test setups, instrumentation requirements, and data acquisition configurations. Support the design and commissioning of electrical test rigs, harnesses, and interface equipment. Ensure all test documentation complies with internal standards and applicable regulations. Conduct risk assessments and ensure safe execution of all electrical test activities. 2.2 Test Execution & Data Acquisition Perform electrical tests including continuity, insulation resistance, power quality, load testing, functional testing, and environmental electrical testing. Install and configure electrical instrumentation such as multimeters, oscilloscopes, power analysers, and signal generators. Operate data acquisition systems and test control equipment to capture accurate and reliable data. Troubleshoot electrical issues, instrumentation faults, and test anomalies during execution. Ensure accurate recording of test conditions, observations, and deviations. 2.3 Data Analysis & Reporting Analyse electrical test data to verify compliance with design requirements and standards. Produce detailed test reports including plots, measurements, and engineering conclusions. Identify electrical failures, root causes, and corrective actions where required. Provide clear technical feedback to design, systems, and manufacturing teams. Support certification and compliance activities with robust electrical test evidence. 2.4 Engineering Support & Collaboration Work closely with electrical, systems, and manufacturing engineers to ensure test coverage aligns with design intent. Support prototype builds, harness manufacture, and integration activities with test-based insights. Assist in resolving electrical design issues through targeted test investigations. Participate in multidisciplinary design reviews and provide electrical test expertise. 2.5 Health, Safety & Quality Ensure all electrical test activities comply with UK Health & Safety legislation including HASAWA 1974. Promote safe working practices in laboratories, workshops, and test facilities. Embed quality and traceability into all test documentation and processes. Support audits, compliance checks, and continuous improvement initiatives. 3. Knowledge, Skills & Experience 3.1 Essential Degree in Electrical Engineering, Electronics Engineering, or related discipline. Experience conducting electrical testing in aerospace, defence, automotive, or similar high-integrity environments. Strong understanding of electrical systems, wiring practices, power distribution, and electronic components. Proficiency with electrical instrumentation and data acquisition systems. Ability to interpret electrical schematics, wiring diagrams, and technical specifications. Strong analytical skills with experience processing and interpreting electrical test data. Good communication skills and ability to work collaboratively across engineering teams. Working knowledge of quality management and configuration control processes. 3.2 Desirable Experience with environmental electrical testing (eg, DO-160, MIL-STD-461/810). Familiarity with aerospace or defence electrical standards and certification processes. Experience designing or commissioning electrical test rigs and harnesses. Knowledge of EMC considerations, grounding, shielding, and electrical safety. Experience with PLM or document control systems (eg, Windchill, Teamcenter, Vault). 4. Security Clearance This role is subject to UK Security Clearance requirements (BPSS, SC, or higher). The post holder must be eligible and able to obtain and maintain the required level of clearance.
A leading engineering organisation is seeking a talented Electronic Systems Engineer to play a key role in the design and integration of complex electronic systems. This is an excellent opportunity to work on advanced, high-integrity engineering projects within a collaborative and innovative environment. They work on a Hybrid basis, with 2-3 days per week onsite, at either their Stevenage, Bristol or Bolton offices. The Role As an Electronic Systems Engineer, you will take ownership of system-level design and integration, translating high-level requirements into robust, fully integrated hardware solutions. You'll be responsible for defining system architectures, breaking down complex equipment into subsystems, and ensuring seamless connectivity across interfaces. Key Responsibilities: Lead system-level electronic design from concept through to deployment Define system architectures, interfaces, and interconnects Produce high-quality technical documentation, including: System schematics Wiring diagrams Interface control documentation Block diagrams Collaborate with cross-functional teams (mechanical, software, firmware, manufacturing) Support system integration, validation, and acceptance testing Conduct root cause analysis and resolve system-level issues Ensure compliance with relevant safety, EMC, and regulatory standards About You We're looking for a systems-oriented engineer who thrives in complex environments and enjoys solving challenging integration problems. Essential: Degree-qualified in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define system architectures and equipment breakdowns Solid understanding of analogue and digital electronics Experience producing technical documentation and system diagrams Strong analytical, problem-solving, and communication skills Familiarity with systems design tools (e.g. DOORS, Rhapsody, MATLAB/Simulink) Desirable: Experience with power distribution and grounding strategies Knowledge of communication protocols (e.g. CAN, Ethernet, SPI, I C, UART) Understanding of EMC/EMI mitigation Background in regulated industries such as aerospace, defence, automotive, rail, or medical Experience with SPICE simulation tools What's on Offer Competitive salary ( 52,500 - 57,000 depending on experience) Annual performance bonus Generous pension scheme (up to 14% combined contributions) Paid overtime opportunities Flexible working arrangements Additional annual leave options (including flexi leave) Enhanced parental leave benefits On-site facilities including subsidised meals and free parking Healthcare cash plan Additional Information Due to the nature of the work, applicants must be eligible to obtain security clearance. This typically requires British citizenship or dual nationality including British citizenship, along with the ability to pass standard background checks. Apply Now If you're an experienced Electronic Systems Engineer looking to work on technically challenging projects with real-world impact, we'd love to hear from you. Apply today or contact us confidentially for more information.
May 15, 2026
Full time
A leading engineering organisation is seeking a talented Electronic Systems Engineer to play a key role in the design and integration of complex electronic systems. This is an excellent opportunity to work on advanced, high-integrity engineering projects within a collaborative and innovative environment. They work on a Hybrid basis, with 2-3 days per week onsite, at either their Stevenage, Bristol or Bolton offices. The Role As an Electronic Systems Engineer, you will take ownership of system-level design and integration, translating high-level requirements into robust, fully integrated hardware solutions. You'll be responsible for defining system architectures, breaking down complex equipment into subsystems, and ensuring seamless connectivity across interfaces. Key Responsibilities: Lead system-level electronic design from concept through to deployment Define system architectures, interfaces, and interconnects Produce high-quality technical documentation, including: System schematics Wiring diagrams Interface control documentation Block diagrams Collaborate with cross-functional teams (mechanical, software, firmware, manufacturing) Support system integration, validation, and acceptance testing Conduct root cause analysis and resolve system-level issues Ensure compliance with relevant safety, EMC, and regulatory standards About You We're looking for a systems-oriented engineer who thrives in complex environments and enjoys solving challenging integration problems. Essential: Degree-qualified in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define system architectures and equipment breakdowns Solid understanding of analogue and digital electronics Experience producing technical documentation and system diagrams Strong analytical, problem-solving, and communication skills Familiarity with systems design tools (e.g. DOORS, Rhapsody, MATLAB/Simulink) Desirable: Experience with power distribution and grounding strategies Knowledge of communication protocols (e.g. CAN, Ethernet, SPI, I C, UART) Understanding of EMC/EMI mitigation Background in regulated industries such as aerospace, defence, automotive, rail, or medical Experience with SPICE simulation tools What's on Offer Competitive salary ( 52,500 - 57,000 depending on experience) Annual performance bonus Generous pension scheme (up to 14% combined contributions) Paid overtime opportunities Flexible working arrangements Additional annual leave options (including flexi leave) Enhanced parental leave benefits On-site facilities including subsidised meals and free parking Healthcare cash plan Additional Information Due to the nature of the work, applicants must be eligible to obtain security clearance. This typically requires British citizenship or dual nationality including British citizenship, along with the ability to pass standard background checks. Apply Now If you're an experienced Electronic Systems Engineer looking to work on technically challenging projects with real-world impact, we'd love to hear from you. Apply today or contact us confidentially for more information.
The Power Systems Engineer will take ownership of energy architecture, ensuring consistent performance across a diverse range of applications, from portable systems to fully autonomous platforms. Working closely with multidisciplinary teams, you will lead the design, integration and validation of battery and power systems, ensuring reliability, efficiency and performance under demanding real world conditions. The Power Systems Engineer will be responsible for: Designing and developing energy systems to support integration across a range of hardware platforms. Acting as the technical lead for power requirements across electrical, mechanical and systems interfaces. Ensuring stable and uninterrupted power delivery to embedded systems, sensors and autonomous subsystems. Developing and implementing thermal management strategies for battery and power systems. Testing and validating power systems within lab environments and real world field conditions. Supporting compliance and safety testing in line with relevant standards (e.g. UL, IEC, CE) The Power Systems Engineer will have: At least 3 years hands on experience working with battery and power systems in real world applications. Strong understanding of battery chemistries, particularly within low temperature or demanding environments. A degree in Electrical Engineering or a related discipline. Experience with battery management systems, thermal control and system integration. Practical experience in prototyping, testing and hardware development (e.g. PCB design, soldering) The ability to manage technical delivery from concept through to deployment. This role is well suited to an engineer who thrives on solving complex power challenges and delivering systems that perform in demanding environments. If that sounds like your kind of challenge, apply with your CV to learn more.
May 15, 2026
Full time
The Power Systems Engineer will take ownership of energy architecture, ensuring consistent performance across a diverse range of applications, from portable systems to fully autonomous platforms. Working closely with multidisciplinary teams, you will lead the design, integration and validation of battery and power systems, ensuring reliability, efficiency and performance under demanding real world conditions. The Power Systems Engineer will be responsible for: Designing and developing energy systems to support integration across a range of hardware platforms. Acting as the technical lead for power requirements across electrical, mechanical and systems interfaces. Ensuring stable and uninterrupted power delivery to embedded systems, sensors and autonomous subsystems. Developing and implementing thermal management strategies for battery and power systems. Testing and validating power systems within lab environments and real world field conditions. Supporting compliance and safety testing in line with relevant standards (e.g. UL, IEC, CE) The Power Systems Engineer will have: At least 3 years hands on experience working with battery and power systems in real world applications. Strong understanding of battery chemistries, particularly within low temperature or demanding environments. A degree in Electrical Engineering or a related discipline. Experience with battery management systems, thermal control and system integration. Practical experience in prototyping, testing and hardware development (e.g. PCB design, soldering) The ability to manage technical delivery from concept through to deployment. This role is well suited to an engineer who thrives on solving complex power challenges and delivering systems that perform in demanding environments. If that sounds like your kind of challenge, apply with your CV to learn more.
Job Title: Senior Data Engineer Location: Warwick (Hybrid Working) Rate: 550 - 650 per day (Umbrella) Contract: Initial 6 Months Role Overview Our client is seeking a skilled Senior Data Engineer to lead the design, development, and maintenance of data integration solutions and data warehouse environments. This role will focus on building and optimising ETL/ELT pipelines, supporting data warehousing initiatives, and ensuring the quality, performance, and reliability of large-scale data systems. The successful candidate will collaborate closely with data architects, analysts, and developers to drive data integration and analytics across the organisation. Key Responsibilities Lead the design, development, and maintenance of large-scale data systems, including data warehouses, data lakes, and pipelines. Design, develop, and maintain ETL/ELT processes utilising tools such as Matillion. Create and maintain optimal data flows and data pipeline architectures. Develop and manage data warehouse objects, including tables, views, and security roles in Snowflake. Extract data from diverse sources, including databases, flat files, and APIs. Transform and cleanse data to ensure quality and integrity. Load data into the data warehouse while ensuring consistency and accuracy. optimise ETL processes for performance, scalability, and reliability. Implement data validation, quality checks, and security measures. Troubleshoot and resolve data issues, performance bottlenecks, and ETL failures. Implement best practises for data warehousing, data modelling, and ETL development. Document ETL processes, data mappings, and configurations. Collaborate closely with data architects, analysts, and developers to support data integration initiatives. Requirements Experience with relational databases, ETL/ELT, and data warehousing. Expertise in ETL/ELT tools such as Informatica, ODI, Matillion, or SSIS. Experience with cloud-based data platforms like Snowflake. Proven experience in designing and developing complex near real-time and/or batch data integration solutions. Familiarity with both traditional and non-traditional analytical data design methodologies (e.g., Kimball, Inmon). Strong SQL programming skills and a solid understanding of relational database concepts. Experience in loading and maintaining enterprise data warehouse environments. Nice to Have Experience working with finance data or within financial services environments. Familiarity with SAP systems and databases. Knowledge of data visualisation tools such as Power BI or Tableau. If you're passionate about data engineering and meet the above criteria, we would love to hear from you. Join our client and play a pivotal role in enhancing their data infrastructure and analytics capabilities. Apply today! Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Please be advised: if you haven't heard from us within 48 hours, then unfortunately your application has not been successful on this occasion. We may, however, keep your details on file for any suitable future vacancies and contact you accordingly. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
May 15, 2026
Contractor
Job Title: Senior Data Engineer Location: Warwick (Hybrid Working) Rate: 550 - 650 per day (Umbrella) Contract: Initial 6 Months Role Overview Our client is seeking a skilled Senior Data Engineer to lead the design, development, and maintenance of data integration solutions and data warehouse environments. This role will focus on building and optimising ETL/ELT pipelines, supporting data warehousing initiatives, and ensuring the quality, performance, and reliability of large-scale data systems. The successful candidate will collaborate closely with data architects, analysts, and developers to drive data integration and analytics across the organisation. Key Responsibilities Lead the design, development, and maintenance of large-scale data systems, including data warehouses, data lakes, and pipelines. Design, develop, and maintain ETL/ELT processes utilising tools such as Matillion. Create and maintain optimal data flows and data pipeline architectures. Develop and manage data warehouse objects, including tables, views, and security roles in Snowflake. Extract data from diverse sources, including databases, flat files, and APIs. Transform and cleanse data to ensure quality and integrity. Load data into the data warehouse while ensuring consistency and accuracy. optimise ETL processes for performance, scalability, and reliability. Implement data validation, quality checks, and security measures. Troubleshoot and resolve data issues, performance bottlenecks, and ETL failures. Implement best practises for data warehousing, data modelling, and ETL development. Document ETL processes, data mappings, and configurations. Collaborate closely with data architects, analysts, and developers to support data integration initiatives. Requirements Experience with relational databases, ETL/ELT, and data warehousing. Expertise in ETL/ELT tools such as Informatica, ODI, Matillion, or SSIS. Experience with cloud-based data platforms like Snowflake. Proven experience in designing and developing complex near real-time and/or batch data integration solutions. Familiarity with both traditional and non-traditional analytical data design methodologies (e.g., Kimball, Inmon). Strong SQL programming skills and a solid understanding of relational database concepts. Experience in loading and maintaining enterprise data warehouse environments. Nice to Have Experience working with finance data or within financial services environments. Familiarity with SAP systems and databases. Knowledge of data visualisation tools such as Power BI or Tableau. If you're passionate about data engineering and meet the above criteria, we would love to hear from you. Join our client and play a pivotal role in enhancing their data infrastructure and analytics capabilities. Apply today! Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Please be advised: if you haven't heard from us within 48 hours, then unfortunately your application has not been successful on this occasion. We may, however, keep your details on file for any suitable future vacancies and contact you accordingly. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
Senior Systems Engineer Reading Full-Time on site £500 per day Inside IR35 4-Day Week or 9-Day Fortnight Available Contract Length: 12 months Are you a skilled Systems Engineer with a passion for Model-Based Systems Engineering (MBSE)? Do you want to play a pivotal role on one of the UK's most innovative and high-profile defence programmes? This is a fantastic opportunity to contribute to complex, cutting-edge systems that directly support critical national infrastructure and future defence capability! The Opportunity As the Senior Systems Engineer, you'll be at the heart of driving and enhancing MBSE capability across a major engineering environment. You'll work alongside technical experts, business leaders, and multidisciplinary teams to develop robust engineering models, improve system integration, and support key programme decision-making. This role offers genuine technical challenge, long-term project work, and the chance to influence the future of systems engineering delivery within a highly secure and advanced environment. Responsibilities Supporting and advancing Model-Based Systems Engineering (MBSE) practices Managing requirements, interfaces, trade studies, and system integration activities Maintaining the integrity, consistency, and usability of complex engineering models Developing clear reporting tools and visualisations for stakeholders Supporting integration between MBSE tools, systems, and wider engineering functions Producing and analysing performance metrics to drive continuous improvement Collaborating with technical specialists and senior stakeholders across the organisation Developing verification and validation strategies to ensure engineering accuracy and traceability Supporting and maintaining SQL databases to ensure reliable engineering data Skills/Qualifications Strong experience working within Model-Based Systems Engineering (MBSE) Proven ability to manage complex engineering models and system integrations Experience with data analysis, reporting, and visualisation tools Good understanding of SQL/database management Strong communication and stakeholder engagement skills Experience developing verification and validation strategies within engineering or defence environments This role will require active UK security clearance! If you are interested and qualified, please contact (url removed)
May 14, 2026
Contractor
Senior Systems Engineer Reading Full-Time on site £500 per day Inside IR35 4-Day Week or 9-Day Fortnight Available Contract Length: 12 months Are you a skilled Systems Engineer with a passion for Model-Based Systems Engineering (MBSE)? Do you want to play a pivotal role on one of the UK's most innovative and high-profile defence programmes? This is a fantastic opportunity to contribute to complex, cutting-edge systems that directly support critical national infrastructure and future defence capability! The Opportunity As the Senior Systems Engineer, you'll be at the heart of driving and enhancing MBSE capability across a major engineering environment. You'll work alongside technical experts, business leaders, and multidisciplinary teams to develop robust engineering models, improve system integration, and support key programme decision-making. This role offers genuine technical challenge, long-term project work, and the chance to influence the future of systems engineering delivery within a highly secure and advanced environment. Responsibilities Supporting and advancing Model-Based Systems Engineering (MBSE) practices Managing requirements, interfaces, trade studies, and system integration activities Maintaining the integrity, consistency, and usability of complex engineering models Developing clear reporting tools and visualisations for stakeholders Supporting integration between MBSE tools, systems, and wider engineering functions Producing and analysing performance metrics to drive continuous improvement Collaborating with technical specialists and senior stakeholders across the organisation Developing verification and validation strategies to ensure engineering accuracy and traceability Supporting and maintaining SQL databases to ensure reliable engineering data Skills/Qualifications Strong experience working within Model-Based Systems Engineering (MBSE) Proven ability to manage complex engineering models and system integrations Experience with data analysis, reporting, and visualisation tools Good understanding of SQL/database management Strong communication and stakeholder engagement skills Experience developing verification and validation strategies within engineering or defence environments This role will require active UK security clearance! If you are interested and qualified, please contact (url removed)
DESCRIPTION We are looking for a talented Manufacturing IT/OT Software Engineer to join our team in Darlington, County Durham, United Kingdom. This is an on-site role. The position requires a significant presence at the workplace and follows a 37.5-hour work week. In this role, you will make an impact in the following ways: Design, develop, and implement software solutions by analyzing business needs, studying system flows, and applying the full software development lifecycle. Document and demonstrate solutions through clear technical documentation, flowcharts, layouts, and system specifications. Evaluate feasibility of proposed solutions by conducting requirements analysis, problem definition, and solution design. Prepare, install, and maintain software applications while ensuring compliance with coding standards, technical design, and system performance requirements. Continuously improve applications and processes by performing system analysis, recommending changes, and integrating new policies, procedures, and technologies. Stay current with emerging tools, programming techniques, and industry best practices through continuous learning, professional engagement, and adoption of modern technologies (including open source). Ensure quality and reliability by actively participating in testing, validation, and certification processes while fostering built-in quality and technical agility within teams. Protect and deliver business value by safeguarding IT assets, supporting decentralized decision-making, and maintaining strong relationships through effective Business Relationship Management practices. RESPONSIBILITIES To be successful in this role you will need the following: Technical Expertise: Proven experience with cloud-based systems and architectures (Azure, AWS, IoT, AI/ML), DevOps practices, CI/CD pipelines, RDBMS (MS SQL, Oracle, PostgreSQL), and integration technologies (APIs, REST, SOAP, webhooks). Proficient in an enterprise language such as: .NET, Java, or C++ with strong object-oriented design and modular architecture principles a plus Operational Technology & Manufacturing Knowledge: Familiarity with robotic and OT systems (AMRs, Cobots, PLCs), industrial KPIs (OEE, MTBF, cycle time), and supporting tools such as SPC and SCADA; strong understanding of OT communication technologies (OPC, MQTT, TCP, networking). Change & Project Management: Demonstrated ability to follow IT change management methodologies, ensure effective stakeholder communication, and take accountability for project deliverables. Collaboration & Leadership: Strong interpersonal skills with the ability to integrate into teams, build relationships across technical and leadership levels, and drive alignment between Plant IT, GPVs, and Client IT organizations. QUALIFICATIONS Education/ Experience: Bachelor's degree in Computer Science, Engineering, or related field, or equivalent professional experience, with a background as a software engineer. IT fundamentals with hands on experience in the full software development lifecycle, including requirements gathering, system design, coding, testing, deployment, and operations. Familiarity with Agile environments and proven ability to apply software engineering best practices (coding standards, code reviews, source control, CI/CD) while effectively collaborating with users, technical teams, and management to deliver on requirements and deadlines.
May 14, 2026
Full time
DESCRIPTION We are looking for a talented Manufacturing IT/OT Software Engineer to join our team in Darlington, County Durham, United Kingdom. This is an on-site role. The position requires a significant presence at the workplace and follows a 37.5-hour work week. In this role, you will make an impact in the following ways: Design, develop, and implement software solutions by analyzing business needs, studying system flows, and applying the full software development lifecycle. Document and demonstrate solutions through clear technical documentation, flowcharts, layouts, and system specifications. Evaluate feasibility of proposed solutions by conducting requirements analysis, problem definition, and solution design. Prepare, install, and maintain software applications while ensuring compliance with coding standards, technical design, and system performance requirements. Continuously improve applications and processes by performing system analysis, recommending changes, and integrating new policies, procedures, and technologies. Stay current with emerging tools, programming techniques, and industry best practices through continuous learning, professional engagement, and adoption of modern technologies (including open source). Ensure quality and reliability by actively participating in testing, validation, and certification processes while fostering built-in quality and technical agility within teams. Protect and deliver business value by safeguarding IT assets, supporting decentralized decision-making, and maintaining strong relationships through effective Business Relationship Management practices. RESPONSIBILITIES To be successful in this role you will need the following: Technical Expertise: Proven experience with cloud-based systems and architectures (Azure, AWS, IoT, AI/ML), DevOps practices, CI/CD pipelines, RDBMS (MS SQL, Oracle, PostgreSQL), and integration technologies (APIs, REST, SOAP, webhooks). Proficient in an enterprise language such as: .NET, Java, or C++ with strong object-oriented design and modular architecture principles a plus Operational Technology & Manufacturing Knowledge: Familiarity with robotic and OT systems (AMRs, Cobots, PLCs), industrial KPIs (OEE, MTBF, cycle time), and supporting tools such as SPC and SCADA; strong understanding of OT communication technologies (OPC, MQTT, TCP, networking). Change & Project Management: Demonstrated ability to follow IT change management methodologies, ensure effective stakeholder communication, and take accountability for project deliverables. Collaboration & Leadership: Strong interpersonal skills with the ability to integrate into teams, build relationships across technical and leadership levels, and drive alignment between Plant IT, GPVs, and Client IT organizations. QUALIFICATIONS Education/ Experience: Bachelor's degree in Computer Science, Engineering, or related field, or equivalent professional experience, with a background as a software engineer. IT fundamentals with hands on experience in the full software development lifecycle, including requirements gathering, system design, coding, testing, deployment, and operations. Familiarity with Agile environments and proven ability to apply software engineering best practices (coding standards, code reviews, source control, CI/CD) while effectively collaborating with users, technical teams, and management to deliver on requirements and deadlines.
Systems Engineer Embedded and Hardware £60,000 to £70,000 depending on skills and experience + Bonus + Benefits Bedford The Vacancy We are seeking an experienced and Senior Systems Engineer Embedded and Hardware to take ownership of the electronics and software workstream for our IVD medical devices. This is a senior role where you will act as technical design authority, ensuring robust system architecture, supplier governance and regulatory compliance while working at system level rather than as a day to day coder. Based in Bedford and working closely with both in house teams and international third party suppliers, this role offers the opportunity to influence products from early architecture through regulatory approval and post market readiness. Reporting to the Head of Engineering, you will provide technical governance and leadership across hardware, embedded firmware and PC software, ensuring all development activities meet quality, safety and regulatory requirements. You will operate as the system-level technical owner, shaping architecture, design controls and verification strategies, while ensuring supplier outputs are delivered to the highest standards. Key Responsibilities: Third Party Oversight and Governance: Partner with external suppliers to develop electronics, embedded firmware, and software for an IVD medical device, leading supplier governance across design controls, KPIs, risk management, schedules, budgets, quality, and regulatory compliance. Supplier Management and Deliverables: Author and manage supplier agreements (quality agreements, SOWs, acceptance criteria, configuration management) and review / approve all supplier outputs, including designs, code, risk documentation, testing artifacts, traceability, and release records Design Controls and Technical Leadership: Own system and software requirements (including safety, EMI / ESD protection, and usability) and ensure full bidirectional traceability from user needs through design, verification, and validation. Architecture, V&V, and Design Transfer: Lead system architecture decisions across electronics, firmware, and software; define and execute verification and validation strategies (including qualified tools and fixtures); and lead design transfer activities. Regulatory Compliance and QMS: Ensure supplier activities operate under ISO 13485 compliant processes and deliver complete DHF / Technical Documentation regulatory expectations; align development to applicable standards. Risk, Submission and Audit Support: Lead and document risk management (ISO 14971), ensure readiness for UDI, labelling, post market surveillance, and change control, and support regulatory submissions and notified body audits by presenting clear technical rationales and objective evidence. Cross Functional and Stakeholder Integration: Integrate the electronics / software workstream with assay / chemistry, mechanical design, manufacturing / operations, and service, collaborating closely with Quality, Regulatory, Clinical, and Customer Support to ensure end to end readiness. Risk, Performance and Delivery Management: Proactively identify and mitigate risks, manage non conformities and CAPAs with root cause analysis, and track / report KPIs including quality, schedule adherence, test coverage, and audit outcomes. International travel required approximately 4 5 times per year. We re Looking for Someone Who Has: Proven experience in medical devices or IVDs, with hands on exposure to embedded electronics, firmware and software development within a regulated environment. Bachelor s Degree in electrical engineering, software engineering or a related discipline; a Master s Degree would be advantageous. Demonstrable experience overseeing third party design partners, OEMs and ODMs. Strong background in real time embedded systems and instrument control. Solid understanding of design controls, verification and validation. Familiarity with statistical methods for V&V, measurement system analysis and design for reliability. Highly organised with exceptional attention to detail. Clear and confident communicator, both written and verbal. Comfortable working within Microsoft 365; Outlook, Teams, Word, Excel, PowerPoint. Strong sense of ownership and accountability. Able to quickly interpret complex information and identify key technical and programme risks. We Can Offer You: An excellent working environment. Hybrid working three days a week in the office with two days a week working from home. 25 days paid annual leave plus bank holidays. Company pension scheme including competitive employer s contribution. Private Medical Insurance package with additional medical cash plan scheme. Enhanced maternity and paternity pay. Company supported employee Health and Wellbeing programme. Life assurance. Free plentiful car parking and electrical car charging points. Beautiful parkland setting with excellent transportation links to Cambridge, Milton Keynes and London. The Company Swiss Precision Diagnostics GmbH (SPD) is a world leader in the research, design and marketing of advanced consumer diagnostic products. Our SPD research centre is at the cutting edge of innovation and is fully engaged in the development of reliable diagnostic products to empower women on their reproductive journey. We are committed to answering the needs of our existing and future consumers, through a continuous flow of new and innovative products. Interested Click apply and you will be redirected to our careers page to complete your application.
May 14, 2026
Full time
Systems Engineer Embedded and Hardware £60,000 to £70,000 depending on skills and experience + Bonus + Benefits Bedford The Vacancy We are seeking an experienced and Senior Systems Engineer Embedded and Hardware to take ownership of the electronics and software workstream for our IVD medical devices. This is a senior role where you will act as technical design authority, ensuring robust system architecture, supplier governance and regulatory compliance while working at system level rather than as a day to day coder. Based in Bedford and working closely with both in house teams and international third party suppliers, this role offers the opportunity to influence products from early architecture through regulatory approval and post market readiness. Reporting to the Head of Engineering, you will provide technical governance and leadership across hardware, embedded firmware and PC software, ensuring all development activities meet quality, safety and regulatory requirements. You will operate as the system-level technical owner, shaping architecture, design controls and verification strategies, while ensuring supplier outputs are delivered to the highest standards. Key Responsibilities: Third Party Oversight and Governance: Partner with external suppliers to develop electronics, embedded firmware, and software for an IVD medical device, leading supplier governance across design controls, KPIs, risk management, schedules, budgets, quality, and regulatory compliance. Supplier Management and Deliverables: Author and manage supplier agreements (quality agreements, SOWs, acceptance criteria, configuration management) and review / approve all supplier outputs, including designs, code, risk documentation, testing artifacts, traceability, and release records Design Controls and Technical Leadership: Own system and software requirements (including safety, EMI / ESD protection, and usability) and ensure full bidirectional traceability from user needs through design, verification, and validation. Architecture, V&V, and Design Transfer: Lead system architecture decisions across electronics, firmware, and software; define and execute verification and validation strategies (including qualified tools and fixtures); and lead design transfer activities. Regulatory Compliance and QMS: Ensure supplier activities operate under ISO 13485 compliant processes and deliver complete DHF / Technical Documentation regulatory expectations; align development to applicable standards. Risk, Submission and Audit Support: Lead and document risk management (ISO 14971), ensure readiness for UDI, labelling, post market surveillance, and change control, and support regulatory submissions and notified body audits by presenting clear technical rationales and objective evidence. Cross Functional and Stakeholder Integration: Integrate the electronics / software workstream with assay / chemistry, mechanical design, manufacturing / operations, and service, collaborating closely with Quality, Regulatory, Clinical, and Customer Support to ensure end to end readiness. Risk, Performance and Delivery Management: Proactively identify and mitigate risks, manage non conformities and CAPAs with root cause analysis, and track / report KPIs including quality, schedule adherence, test coverage, and audit outcomes. International travel required approximately 4 5 times per year. We re Looking for Someone Who Has: Proven experience in medical devices or IVDs, with hands on exposure to embedded electronics, firmware and software development within a regulated environment. Bachelor s Degree in electrical engineering, software engineering or a related discipline; a Master s Degree would be advantageous. Demonstrable experience overseeing third party design partners, OEMs and ODMs. Strong background in real time embedded systems and instrument control. Solid understanding of design controls, verification and validation. Familiarity with statistical methods for V&V, measurement system analysis and design for reliability. Highly organised with exceptional attention to detail. Clear and confident communicator, both written and verbal. Comfortable working within Microsoft 365; Outlook, Teams, Word, Excel, PowerPoint. Strong sense of ownership and accountability. Able to quickly interpret complex information and identify key technical and programme risks. We Can Offer You: An excellent working environment. Hybrid working three days a week in the office with two days a week working from home. 25 days paid annual leave plus bank holidays. Company pension scheme including competitive employer s contribution. Private Medical Insurance package with additional medical cash plan scheme. Enhanced maternity and paternity pay. Company supported employee Health and Wellbeing programme. Life assurance. Free plentiful car parking and electrical car charging points. Beautiful parkland setting with excellent transportation links to Cambridge, Milton Keynes and London. The Company Swiss Precision Diagnostics GmbH (SPD) is a world leader in the research, design and marketing of advanced consumer diagnostic products. Our SPD research centre is at the cutting edge of innovation and is fully engaged in the development of reliable diagnostic products to empower women on their reproductive journey. We are committed to answering the needs of our existing and future consumers, through a continuous flow of new and innovative products. Interested Click apply and you will be redirected to our careers page to complete your application.
Job Description Job Title Developer - MS Dynamics Finance and Procurement Location At client office(s) in London or client sites as required, minimum 3 days per week. Start Date June 2026 Duration 12 months Experience At least seven (7) years working as a Developer within a large organisation, preferably within central government, defence, or other highly regulated environments. Must have demonstrable experience developing Microsoft Dynamics solutions, ideally across Finance and Procurement functions. Security Clearance Must be UK citizen. Previous security clearance of SC or over required. Do not apply if non-UK citizen. Key Responsibilities Designs, develops, configures, and supports the technical delivery of a major MS Dynamics programme, ensuring that build outputs are robust, maintainable, and aligned to the agreed solution architecture. Works closely with the architect, business analyst, testers, and wider delivery team to translate requirements into high-quality technical components. Supports the use of the latest Microsoft AI-enabled capabilities where appropriate to improve automation, user productivity, and process efficiency. Development and Configuration Develop and configure Microsoft Dynamics Finance and Procurement components in line with functional and technical requirements. Build high-quality solutions that are maintainable, scalable, and aligned to the target architecture. Implement customisations, extensions, workflows, forms, reports, and integrations as required. Ensure development work follows agreed coding standards, design principles, and delivery processes. Technical Implementation Translate functional and technical specifications into working system components. Work closely with the architect to ensure solutions are delivered in accordance with the approved design. Support integration of Microsoft Dynamics with other enterprise systems and data sources. Troubleshoot and resolve technical issues across development, test, and deployment environments. Finance and Procurement Support Develop solutions that support core Finance and Procurement business processes. Ensure technical build aligns with operational requirements, controls, and reporting needs. Work with business users and analysts to clarify requirements and validate technical outputs. Support the delivery of process improvements through efficient system configuration and automation. Testing and Quality Assurance Support unit testing, system testing, and defect resolution activities. Investigate and fix issues identified during testing and user acceptance. Ensure code quality, traceability, and adherence to development standards. Work collaboratively with testers and analysts to ensure that solutions meet business expectations. Integration and Data Build and support interfaces, data flows, and integrations across Microsoft Dynamics and connected systems. Assist in data preparation, conversion, validation, and reconciliation activities where required. Ensure technical solutions handle data securely, accurately, and efficiently. Support reporting and analytical outputs where technical development is required. Microsoft Dynamics and AI Capability Demonstrate strong practical knowledge of Microsoft Dynamics development, particularly in Finance and Procurement. Support the use of the latest Microsoft platform features, including AI-enabled capabilities where appropriate. Implement automation and productivity enhancements that improve user experience and reduce manual effort. Stay informed on emerging Microsoft Dynamics and AI features relevant to enterprise delivery. Deployment and Support Support release management, deployment activities, and transition into live operation. Assist with hypercare and post-go-live support, resolving issues in a timely manner. Contribute to documentation, knowledge transfer, and handover activities. Work proactively to ensure solutions are supportable by the client's operational teams. Qualifications Degree in computer science, engineering, information systems, or a related field. Proven experience of being a Developer within a large, complex programme for a large organisation. Demonstrable experience developing Microsoft Dynamics solutions, ideally in Finance and Procurement. Experience in defence, central government, or similarly regulated environments highly desirable. Competencies and Skills Required Strong technical development and configuration skills. Good understanding of Microsoft Dynamics architecture, tools, and integration patterns. Strong knowledge of Finance and Procurement business processes. Ability to translate functional requirements into practical technical solutions. Experience with testing, defect resolution, and deployment support. Strong problem-solving and troubleshooting abilities. Excellent communication skills with the ability to work effectively across technical and business teams. Ability to work both independently and within a team. Demonstrated leadership abilities, including the ability to take ownership and getting things done. High attention to detail and a disciplined approach to development quality. Familiarity with Microsoft 365 and broader Microsoft platform technologies. Awareness of AI-enabled business applications and automation opportunities desirable. Ability to manage multiple tasks effectively and meet deadlines. About Us Crear Group Ltd is a management consultancy focused on business transformation and growth. We help public and private sector organisations deliver complex change, streamline operations, and use data to improve decision-making. From strategy to delivery, we enable better customer outcomes, higher efficiency, lower costs, and sustainable results.
May 14, 2026
Job Description Job Title Developer - MS Dynamics Finance and Procurement Location At client office(s) in London or client sites as required, minimum 3 days per week. Start Date June 2026 Duration 12 months Experience At least seven (7) years working as a Developer within a large organisation, preferably within central government, defence, or other highly regulated environments. Must have demonstrable experience developing Microsoft Dynamics solutions, ideally across Finance and Procurement functions. Security Clearance Must be UK citizen. Previous security clearance of SC or over required. Do not apply if non-UK citizen. Key Responsibilities Designs, develops, configures, and supports the technical delivery of a major MS Dynamics programme, ensuring that build outputs are robust, maintainable, and aligned to the agreed solution architecture. Works closely with the architect, business analyst, testers, and wider delivery team to translate requirements into high-quality technical components. Supports the use of the latest Microsoft AI-enabled capabilities where appropriate to improve automation, user productivity, and process efficiency. Development and Configuration Develop and configure Microsoft Dynamics Finance and Procurement components in line with functional and technical requirements. Build high-quality solutions that are maintainable, scalable, and aligned to the target architecture. Implement customisations, extensions, workflows, forms, reports, and integrations as required. Ensure development work follows agreed coding standards, design principles, and delivery processes. Technical Implementation Translate functional and technical specifications into working system components. Work closely with the architect to ensure solutions are delivered in accordance with the approved design. Support integration of Microsoft Dynamics with other enterprise systems and data sources. Troubleshoot and resolve technical issues across development, test, and deployment environments. Finance and Procurement Support Develop solutions that support core Finance and Procurement business processes. Ensure technical build aligns with operational requirements, controls, and reporting needs. Work with business users and analysts to clarify requirements and validate technical outputs. Support the delivery of process improvements through efficient system configuration and automation. Testing and Quality Assurance Support unit testing, system testing, and defect resolution activities. Investigate and fix issues identified during testing and user acceptance. Ensure code quality, traceability, and adherence to development standards. Work collaboratively with testers and analysts to ensure that solutions meet business expectations. Integration and Data Build and support interfaces, data flows, and integrations across Microsoft Dynamics and connected systems. Assist in data preparation, conversion, validation, and reconciliation activities where required. Ensure technical solutions handle data securely, accurately, and efficiently. Support reporting and analytical outputs where technical development is required. Microsoft Dynamics and AI Capability Demonstrate strong practical knowledge of Microsoft Dynamics development, particularly in Finance and Procurement. Support the use of the latest Microsoft platform features, including AI-enabled capabilities where appropriate. Implement automation and productivity enhancements that improve user experience and reduce manual effort. Stay informed on emerging Microsoft Dynamics and AI features relevant to enterprise delivery. Deployment and Support Support release management, deployment activities, and transition into live operation. Assist with hypercare and post-go-live support, resolving issues in a timely manner. Contribute to documentation, knowledge transfer, and handover activities. Work proactively to ensure solutions are supportable by the client's operational teams. Qualifications Degree in computer science, engineering, information systems, or a related field. Proven experience of being a Developer within a large, complex programme for a large organisation. Demonstrable experience developing Microsoft Dynamics solutions, ideally in Finance and Procurement. Experience in defence, central government, or similarly regulated environments highly desirable. Competencies and Skills Required Strong technical development and configuration skills. Good understanding of Microsoft Dynamics architecture, tools, and integration patterns. Strong knowledge of Finance and Procurement business processes. Ability to translate functional requirements into practical technical solutions. Experience with testing, defect resolution, and deployment support. Strong problem-solving and troubleshooting abilities. Excellent communication skills with the ability to work effectively across technical and business teams. Ability to work both independently and within a team. Demonstrated leadership abilities, including the ability to take ownership and getting things done. High attention to detail and a disciplined approach to development quality. Familiarity with Microsoft 365 and broader Microsoft platform technologies. Awareness of AI-enabled business applications and automation opportunities desirable. Ability to manage multiple tasks effectively and meet deadlines. About Us Crear Group Ltd is a management consultancy focused on business transformation and growth. We help public and private sector organisations deliver complex change, streamline operations, and use data to improve decision-making. From strategy to delivery, we enable better customer outcomes, higher efficiency, lower costs, and sustainable results.
Salary: Competitive depending on experience Location: 2-3 days on-site at our Harwell office with travel to client site when required Contract type: Full-timepermanent - 37.5 hours A note from the Founders Oxford Dynamics is at an inflection point. We operate in some of the most complex and high stakes environments in the world - defence, national security, AI and robotics. The decisions we make now will define not just how fast we grow, but who we become. You will work closely with all the team. You will be trusted with judgment calls. You will influence the business. And you will see the impact of your work every day in the work we do. If you are excited by ownership, pace and purpose - and by building something that genuinely matters - we would love to hear from you. Who We Are Founded in 2020, Oxford Dynamics (OD) is a fast growing UK deep tech company developing AI and robotic systems designed to operate in mission critical environments. Our flagship AVIS (A Very Intelligent System) AI framework fuses multi modal data - text, imagery, telemetry and sensor feeds - enabling operators to interrogate complex information at speed and make better decisions under pressure. Our STRIDER robotic platform performs autonomous tasks in hazardous environments, protecting people while extending operational reach. Our ambition is simple but demanding: to converge AI and robotics so machines can sense, understand and act in complex, real world environments. We work with defence and security organisations internationally to help protect nations, infrastructure and lives. What you will be doing here/ why this role matters Oxford Dynamics is a small team who rely on a collaborative and positive approach and so the right attitude for this role is equally as important as experience. We are at an important stage and time in our growth, and as aSenior AI Generative Robotics Engineer you will be an essential part of our success. You'll work at thecutting edge of agentic and generative AI, building systems that move beyond lab demos and intoreal world deployment at pace. At Oxford Dynamics, you'll have the freedom to experiment in a fast moving environment, the responsibility to deliver, and the opportunity to shape howmulti agent AI systems operate in complex, constrained, and high trust environments. If you're excited byagent orchestration, VLLMs, and deploying AI where it matters, this role is built for you! Role Summary We're hiring a Test & AI Evaluation Lead to own how Oxford Dynamics validates its AI driven, mission critical systems - from multi agent orchestration and LLM outputs through to cloud infrastructure and real time user facing applications. You'll design and lead test approaches where correctness, resilience, and security matter as much as feature velocity. Working embedded with AI, Backend, Frontend, and DevOps, you'll shape how we validate agent behaviours, data pipelines, and end to end operational workflows - from research prototypes through to production deployments for Defence and Security customers. Quality is built in from day one, not inspected at the end. Key Responsibilities Define and own the end to end test strategy across AI, backend, frontend, and infrastructure layers. Establish testing standards appropriate for agentic AI systems, including non deterministic behaviour and probabilistic outputs. Ensure testing aligns with mission critical, safety conscious, and security first delivery expectations. Act as the primary quality authority across projects, advising engineering and product leadership on risk and readiness. AI & Data Focused Testing Design approaches for testing multi agent workflows, including orchestration logic, memory/state handling, and tool integrations. Define validation strategies for LLM outputs, including groundedness, hallucination detection, task success rates, and regression testing. Work with AI Engineers to embed evaluation metrics and pass/fail thresholds into pipelines. Validate data ingestion, transformation, and inference pipelines across structured and unstructured data sources. Automation & Tooling Drive a test automation first mindset, integrating tests into CI/CD pipelines (GitHub Actions, Argo CD). Oversee automated testing across API and service layers, UI (E2E and accessibility), and infrastructure and deployment workflows. Select, implement, and evolve testing tools and frameworks appropriate to modern cloud native and AI systems. Non Functional Testing Own performance, scalability, reliability, and resilience testing for distributed systems. Coordinate security testing activities in line with secure by design principles (e.g. IAM, secrets handling, data boundaries). Validate backup, disaster recovery, and failover scenarios alongside DevOps and Backend teams. Delivery & Collaboration Embed with delivery teams to ensure testing is planned early and executed continuously. Work closely with Product and Engineering to define clear acceptance criteria and definition of done. Provide clear, decision ready quality reporting to technical and non technical stakeholders. Support customer facing demonstrations, trials, and operational readiness assessments. Required Skills & Experience Proven experience as a Test Manager, Senior Test Lead, or equivalent on complex software systems. Strong track record of taking applications into production in regulated environments. Strong background in automated testing across APIs, services, and UIs, integrated into CI/CD pipelines. Experience testing distributed, cloud native systems (AWS, GCP, or Kubernetes), including performance, reliability, and resilience. Awareness of compliance frameworks (e.g. ISO 27001, NIST, OWASP). ISTQB Advanced / Test Manager certification or equivalent practical experience. SC Clearance or eligibility to obtain UK SC Clearance. Preferred Experience Experience in UK defence, public sector, or security environments. Experience testing AI/ML/LLM based systems, including non deterministic outputs. Exposure to agent based or workflow driven architectures. Soft Skills A pragmatic, delivery focused mindset - able to balance speed with rigour. Comfortable operating in fast moving, ambiguous, R&D heavy environments. Confidence challenging assumptions and raising quality risks early. Strong written and verbal communication, especially around complex technical risk. Why Oxford Dynamics? Join the most exciting growth area in the UK: AI and Robotics! Every member of the Oxford Dynamics team has a major impact on the products and services we provide. Regardless of job title you'll get to make a real difference and learn from colleagues about all areas of our business. Benefits Salary: negotiable based on experience and attitudes Rapid career progression with meaningful ownership of core systems Opportunity to shape the future of a fast growing, successful, early stage business Flexible working hours Hybrid working model Company pension (UK Government NEST scheme) with company contributions at 4% Private Healthcare 29 days holiday in addition to public holidays (Full Time Equivalent) Oxford Dynamics is committed to creating an inclusive team experience for all. Regardless of race, gender, religion, sexual orientation, age, disability, or parental status, we believe our work is at its best when everyone feels free to be their authentic self. Why This Role? You'll play a critical shaping role in how Oxford Dynamics delivers trustworthy, production ready AI systems into some of the most demanding operational environments there are. If you enjoy working close to the technology, influencing how systems are built - not just tested - and tackling the realities of validating AI driven software, this role gives you genuine ownership and impact.
May 14, 2026
Full time
Salary: Competitive depending on experience Location: 2-3 days on-site at our Harwell office with travel to client site when required Contract type: Full-timepermanent - 37.5 hours A note from the Founders Oxford Dynamics is at an inflection point. We operate in some of the most complex and high stakes environments in the world - defence, national security, AI and robotics. The decisions we make now will define not just how fast we grow, but who we become. You will work closely with all the team. You will be trusted with judgment calls. You will influence the business. And you will see the impact of your work every day in the work we do. If you are excited by ownership, pace and purpose - and by building something that genuinely matters - we would love to hear from you. Who We Are Founded in 2020, Oxford Dynamics (OD) is a fast growing UK deep tech company developing AI and robotic systems designed to operate in mission critical environments. Our flagship AVIS (A Very Intelligent System) AI framework fuses multi modal data - text, imagery, telemetry and sensor feeds - enabling operators to interrogate complex information at speed and make better decisions under pressure. Our STRIDER robotic platform performs autonomous tasks in hazardous environments, protecting people while extending operational reach. Our ambition is simple but demanding: to converge AI and robotics so machines can sense, understand and act in complex, real world environments. We work with defence and security organisations internationally to help protect nations, infrastructure and lives. What you will be doing here/ why this role matters Oxford Dynamics is a small team who rely on a collaborative and positive approach and so the right attitude for this role is equally as important as experience. We are at an important stage and time in our growth, and as aSenior AI Generative Robotics Engineer you will be an essential part of our success. You'll work at thecutting edge of agentic and generative AI, building systems that move beyond lab demos and intoreal world deployment at pace. At Oxford Dynamics, you'll have the freedom to experiment in a fast moving environment, the responsibility to deliver, and the opportunity to shape howmulti agent AI systems operate in complex, constrained, and high trust environments. If you're excited byagent orchestration, VLLMs, and deploying AI where it matters, this role is built for you! Role Summary We're hiring a Test & AI Evaluation Lead to own how Oxford Dynamics validates its AI driven, mission critical systems - from multi agent orchestration and LLM outputs through to cloud infrastructure and real time user facing applications. You'll design and lead test approaches where correctness, resilience, and security matter as much as feature velocity. Working embedded with AI, Backend, Frontend, and DevOps, you'll shape how we validate agent behaviours, data pipelines, and end to end operational workflows - from research prototypes through to production deployments for Defence and Security customers. Quality is built in from day one, not inspected at the end. Key Responsibilities Define and own the end to end test strategy across AI, backend, frontend, and infrastructure layers. Establish testing standards appropriate for agentic AI systems, including non deterministic behaviour and probabilistic outputs. Ensure testing aligns with mission critical, safety conscious, and security first delivery expectations. Act as the primary quality authority across projects, advising engineering and product leadership on risk and readiness. AI & Data Focused Testing Design approaches for testing multi agent workflows, including orchestration logic, memory/state handling, and tool integrations. Define validation strategies for LLM outputs, including groundedness, hallucination detection, task success rates, and regression testing. Work with AI Engineers to embed evaluation metrics and pass/fail thresholds into pipelines. Validate data ingestion, transformation, and inference pipelines across structured and unstructured data sources. Automation & Tooling Drive a test automation first mindset, integrating tests into CI/CD pipelines (GitHub Actions, Argo CD). Oversee automated testing across API and service layers, UI (E2E and accessibility), and infrastructure and deployment workflows. Select, implement, and evolve testing tools and frameworks appropriate to modern cloud native and AI systems. Non Functional Testing Own performance, scalability, reliability, and resilience testing for distributed systems. Coordinate security testing activities in line with secure by design principles (e.g. IAM, secrets handling, data boundaries). Validate backup, disaster recovery, and failover scenarios alongside DevOps and Backend teams. Delivery & Collaboration Embed with delivery teams to ensure testing is planned early and executed continuously. Work closely with Product and Engineering to define clear acceptance criteria and definition of done. Provide clear, decision ready quality reporting to technical and non technical stakeholders. Support customer facing demonstrations, trials, and operational readiness assessments. Required Skills & Experience Proven experience as a Test Manager, Senior Test Lead, or equivalent on complex software systems. Strong track record of taking applications into production in regulated environments. Strong background in automated testing across APIs, services, and UIs, integrated into CI/CD pipelines. Experience testing distributed, cloud native systems (AWS, GCP, or Kubernetes), including performance, reliability, and resilience. Awareness of compliance frameworks (e.g. ISO 27001, NIST, OWASP). ISTQB Advanced / Test Manager certification or equivalent practical experience. SC Clearance or eligibility to obtain UK SC Clearance. Preferred Experience Experience in UK defence, public sector, or security environments. Experience testing AI/ML/LLM based systems, including non deterministic outputs. Exposure to agent based or workflow driven architectures. Soft Skills A pragmatic, delivery focused mindset - able to balance speed with rigour. Comfortable operating in fast moving, ambiguous, R&D heavy environments. Confidence challenging assumptions and raising quality risks early. Strong written and verbal communication, especially around complex technical risk. Why Oxford Dynamics? Join the most exciting growth area in the UK: AI and Robotics! Every member of the Oxford Dynamics team has a major impact on the products and services we provide. Regardless of job title you'll get to make a real difference and learn from colleagues about all areas of our business. Benefits Salary: negotiable based on experience and attitudes Rapid career progression with meaningful ownership of core systems Opportunity to shape the future of a fast growing, successful, early stage business Flexible working hours Hybrid working model Company pension (UK Government NEST scheme) with company contributions at 4% Private Healthcare 29 days holiday in addition to public holidays (Full Time Equivalent) Oxford Dynamics is committed to creating an inclusive team experience for all. Regardless of race, gender, religion, sexual orientation, age, disability, or parental status, we believe our work is at its best when everyone feels free to be their authentic self. Why This Role? You'll play a critical shaping role in how Oxford Dynamics delivers trustworthy, production ready AI systems into some of the most demanding operational environments there are. If you enjoy working close to the technology, influencing how systems are built - not just tested - and tackling the realities of validating AI driven software, this role gives you genuine ownership and impact.
Multiverse is the upskilling platform for AI and Tech adoption. We have partnered with 1,500+ companies to deliver a new kind of learning that's transforming today's workforce. Our upskilling apprenticeships are designed for people of any age and career stage to build critical AI, data, and tech skills. Our learners have driven $2bn+ ROI for their employers, using the skills they've learned to improve productivity and measurable performance. In June 2022, we announced a $220 million Series D funding round co led by StepStone Group, Lightspeed Venture Partners and General Catalyst. With a post money valuation of $1.7 bn, the round makes us the UK's first EdTech unicorn. But we're not stopping there. With a strong operational footprint and 800+ employees, we have ambitious plans to continue scaling. We're building a world where tech skills unlock people's potential and output. Join Multiverse and power our mission to equip the workforce to win in the AI era. The Portfolio Lead curates a world class UK apprenticeship product set focused on Data upskilling. Working as one of two dedicated leads within our Data vertical, you are a data literate strategist who isn't shy about your passion for how data literacy, machine learning and advanced analytics are reshaping the workforce. You have a deep understanding of the data tooling market, both now and how it will continue to evolve. Practically, you will own the roadmap and key performance metrics for a set of products, proactively scoping new UK releases to grow bookings and influencing cross organisational decisions on how to maintain and improve programme retention and quality as we scale. You are the technical point of contact for GTM discovery, often supporting complex deal structures or tooling partnership meetings to maximise alignment between our data products and client needs. You also deeply understand what effective, high impact learning looks like in a technical data context and will support our Admissions, Delivery, Learning and Technology/Product teams to evolve their processes as we launch new products or improve our existing offerings. As we release synchronous and blended learning models, you will be vital in quality assuring our products and supporting other members of the Learning team (such as Senior Programme Designers and Technical Learning Designers) to make the right choices to maximise learner engagement. What You'll Do Portfolio Strategy Data Product Roadmap: Own the development and iteration of a subset of our Data product offerings by analysing data (both internal and external) to improve net new bookings, customer retention and learner retention Market Alignment: Validate our assumptions and competitor analysis in the market in partnership with Product Marketing, shaping how we communicate technical value and competitor positioning Horizon Scanning: Stay ahead of the curve on data and tooling trends to identify new skills development pain points and opportunities Investment Validation: Support GTM, Finance and our Delivery teams to scope custom data offerings, balancing market potential against the technical investment required. Product Development, Launch & Iteration Learning Squad Management and Prioritisation: work collaboratively with stakeholders across the business to create compliant apprenticeship curricula which meet learner and client needs. Use data and insights (qualitative and quantitative) to identify and prioritise opportunities for growth and improvement, including managing the backlog and prioritisation of improvements for wider Learning team members and teams external to Learning Organisational enablement and readiness: support partners in Delivery, Admissions and Product to assess and enable the readiness of our systems and people to deliver a high quality learning experience Proactive Risk Mitigation: Identify and elevate risks across all levels in the organisation, including C Suite, to ensure products remain on track to hit quality benchmarks. Agile Feedback Integration: Establish and lead rigorous feedback loops for your products. You won't just "collect" feedback; you will find effective ways to synthesise what you are hearing from different sources including our own internal delivery teams, learners and clients Expert Credibility: Serve as the internal and external "voice" of the data practitioner, building trust with technical leaders and stakeholders at all levels What You'll Bring Data Domain Expertise: A strong background in data upskilling with an existing network of experts and sources you trust to help you stay at the cutting edge-you understand the difference between a data warehouse and a data lake, and you know which libraries or tools are currently (or soon to be) essential for the modern data stack in a range of customer types Product or Curriculum Launch Experience: Proven experience working with a broad cross functional group of stakeholders to launch learning products and their ongoing improvements Confident Written and Oral Communication at all levels: You switch with ease from talking about the technical specifications of a new learning lab environment, to effectively raising a risk with the SLT on product performance, to convincing a Chief Data Officer on the ROI your products bring to his business metrics. You actively enjoy thinking about how to influence these different stakeholders Ability to distinguish between signal and noise: You know how to make stakeholders feel heard whilst holding the line on what is right to prioritise and why. You effectively balance the need to improve learner experience with the practical realities of working with constrained resources A strong vision for applied learning: you strongly believe in the power of apprenticeship and applied learning models to supercharge the acquisition of data skills and you bring vision and expertise both internally and externally to how to do this effectively AI enabled practices: you are confident in building and using AI workflows to automate research, development and reporting tasks, and are excited about embracing AI to help you spend time on the tasks which most need your expertise Preferred Skills and Qualifications Relevant industry experience: work experience in a data aligned field such as Data Science, Analytics or Engineering Instructional Literacy: Experience with cohort based or online content creation, specifically within technical or professional training Regulatory Knowledge Experience working within regulated structures (e.g., UK Apprenticeship Levy) is a significant plus. Benefits Time off - 27 days holiday, plus 5 additional days off: 1 life event day, 2 volunteer days, 2 company wide wellbeing days (M Powered Weekend) and 8 bank holidays per year Health & Wellness - private medical Insurance with Bupa, a medical cashback scheme, life insurance, gym membership & wellness resources through Wellhub and access to Spill - all in one mental health support Hybrid work offering - for most roles we collaborate in the office three days per week with the exception of Coaches and Instructors who collaborate in the office once a month Work from anywhere scheme - you'll have the opportunity to work from anywhere, up to 10 days per year Space to connect - Beyond the desk, we make time for weekly catch ups, seasonal celebrations, and have a kitchen that's always stocked! Our Commitment to Diversity, Equity and Inclusion We're an equal opportunities employer. And proud of it. Every applicant and employee is afforded the same opportunities regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. This will never change. Read our Equality, Diversity & Inclusion policy here. Our Commitment to Safeguarding Multiverse is committed to safeguarding and promoting the welfare of our learners. We expect all employees to share this commitment and adhere to our Safeguarding Policy, our Prevent Policy and all other Multiverse company policies. Successful applicants will be required to undertake at least a Basic check via the Disclosure Barring Service (DBS). For roles that will involve a Regulated Activity, successful applicants must also undergo an Enhanced DBS check, including a Children's Barred List check and a Prohibition Order check. Roles involving Regulated Activity may interact with vulnerable groups, therefore are exempt from the Rehabilitation of Offenders Act 1974 meaning applicants are required to declare any convictions, cautions, reprimands, and final warnings. Providing false information is an offence and could result in the application being rejected or summary dismissal if the applicant has been selected, and possible referral to the police and the DBS.
May 14, 2026
Full time
Multiverse is the upskilling platform for AI and Tech adoption. We have partnered with 1,500+ companies to deliver a new kind of learning that's transforming today's workforce. Our upskilling apprenticeships are designed for people of any age and career stage to build critical AI, data, and tech skills. Our learners have driven $2bn+ ROI for their employers, using the skills they've learned to improve productivity and measurable performance. In June 2022, we announced a $220 million Series D funding round co led by StepStone Group, Lightspeed Venture Partners and General Catalyst. With a post money valuation of $1.7 bn, the round makes us the UK's first EdTech unicorn. But we're not stopping there. With a strong operational footprint and 800+ employees, we have ambitious plans to continue scaling. We're building a world where tech skills unlock people's potential and output. Join Multiverse and power our mission to equip the workforce to win in the AI era. The Portfolio Lead curates a world class UK apprenticeship product set focused on Data upskilling. Working as one of two dedicated leads within our Data vertical, you are a data literate strategist who isn't shy about your passion for how data literacy, machine learning and advanced analytics are reshaping the workforce. You have a deep understanding of the data tooling market, both now and how it will continue to evolve. Practically, you will own the roadmap and key performance metrics for a set of products, proactively scoping new UK releases to grow bookings and influencing cross organisational decisions on how to maintain and improve programme retention and quality as we scale. You are the technical point of contact for GTM discovery, often supporting complex deal structures or tooling partnership meetings to maximise alignment between our data products and client needs. You also deeply understand what effective, high impact learning looks like in a technical data context and will support our Admissions, Delivery, Learning and Technology/Product teams to evolve their processes as we launch new products or improve our existing offerings. As we release synchronous and blended learning models, you will be vital in quality assuring our products and supporting other members of the Learning team (such as Senior Programme Designers and Technical Learning Designers) to make the right choices to maximise learner engagement. What You'll Do Portfolio Strategy Data Product Roadmap: Own the development and iteration of a subset of our Data product offerings by analysing data (both internal and external) to improve net new bookings, customer retention and learner retention Market Alignment: Validate our assumptions and competitor analysis in the market in partnership with Product Marketing, shaping how we communicate technical value and competitor positioning Horizon Scanning: Stay ahead of the curve on data and tooling trends to identify new skills development pain points and opportunities Investment Validation: Support GTM, Finance and our Delivery teams to scope custom data offerings, balancing market potential against the technical investment required. Product Development, Launch & Iteration Learning Squad Management and Prioritisation: work collaboratively with stakeholders across the business to create compliant apprenticeship curricula which meet learner and client needs. Use data and insights (qualitative and quantitative) to identify and prioritise opportunities for growth and improvement, including managing the backlog and prioritisation of improvements for wider Learning team members and teams external to Learning Organisational enablement and readiness: support partners in Delivery, Admissions and Product to assess and enable the readiness of our systems and people to deliver a high quality learning experience Proactive Risk Mitigation: Identify and elevate risks across all levels in the organisation, including C Suite, to ensure products remain on track to hit quality benchmarks. Agile Feedback Integration: Establish and lead rigorous feedback loops for your products. You won't just "collect" feedback; you will find effective ways to synthesise what you are hearing from different sources including our own internal delivery teams, learners and clients Expert Credibility: Serve as the internal and external "voice" of the data practitioner, building trust with technical leaders and stakeholders at all levels What You'll Bring Data Domain Expertise: A strong background in data upskilling with an existing network of experts and sources you trust to help you stay at the cutting edge-you understand the difference between a data warehouse and a data lake, and you know which libraries or tools are currently (or soon to be) essential for the modern data stack in a range of customer types Product or Curriculum Launch Experience: Proven experience working with a broad cross functional group of stakeholders to launch learning products and their ongoing improvements Confident Written and Oral Communication at all levels: You switch with ease from talking about the technical specifications of a new learning lab environment, to effectively raising a risk with the SLT on product performance, to convincing a Chief Data Officer on the ROI your products bring to his business metrics. You actively enjoy thinking about how to influence these different stakeholders Ability to distinguish between signal and noise: You know how to make stakeholders feel heard whilst holding the line on what is right to prioritise and why. You effectively balance the need to improve learner experience with the practical realities of working with constrained resources A strong vision for applied learning: you strongly believe in the power of apprenticeship and applied learning models to supercharge the acquisition of data skills and you bring vision and expertise both internally and externally to how to do this effectively AI enabled practices: you are confident in building and using AI workflows to automate research, development and reporting tasks, and are excited about embracing AI to help you spend time on the tasks which most need your expertise Preferred Skills and Qualifications Relevant industry experience: work experience in a data aligned field such as Data Science, Analytics or Engineering Instructional Literacy: Experience with cohort based or online content creation, specifically within technical or professional training Regulatory Knowledge Experience working within regulated structures (e.g., UK Apprenticeship Levy) is a significant plus. Benefits Time off - 27 days holiday, plus 5 additional days off: 1 life event day, 2 volunteer days, 2 company wide wellbeing days (M Powered Weekend) and 8 bank holidays per year Health & Wellness - private medical Insurance with Bupa, a medical cashback scheme, life insurance, gym membership & wellness resources through Wellhub and access to Spill - all in one mental health support Hybrid work offering - for most roles we collaborate in the office three days per week with the exception of Coaches and Instructors who collaborate in the office once a month Work from anywhere scheme - you'll have the opportunity to work from anywhere, up to 10 days per year Space to connect - Beyond the desk, we make time for weekly catch ups, seasonal celebrations, and have a kitchen that's always stocked! Our Commitment to Diversity, Equity and Inclusion We're an equal opportunities employer. And proud of it. Every applicant and employee is afforded the same opportunities regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. This will never change. Read our Equality, Diversity & Inclusion policy here. Our Commitment to Safeguarding Multiverse is committed to safeguarding and promoting the welfare of our learners. We expect all employees to share this commitment and adhere to our Safeguarding Policy, our Prevent Policy and all other Multiverse company policies. Successful applicants will be required to undertake at least a Basic check via the Disclosure Barring Service (DBS). For roles that will involve a Regulated Activity, successful applicants must also undergo an Enhanced DBS check, including a Children's Barred List check and a Prohibition Order check. Roles involving Regulated Activity may interact with vulnerable groups, therefore are exempt from the Rehabilitation of Offenders Act 1974 meaning applicants are required to declare any convictions, cautions, reprimands, and final warnings. Providing false information is an offence and could result in the application being rejected or summary dismissal if the applicant has been selected, and possible referral to the police and the DBS.
A career without limits As the nation's flag carrier, we take great pride in connecting Britain with the world and the world with Britain. It's something we've been doing for over 100 years, ever since we launched the world's first international scheduled air service between London and Paris. This originality has been in our blood since day one. It's the spirit we share with the people that fly with us, our partners, and our colleagues. So, whether you are a reassuring voice on the end of a phone, a smile at the door, under a wing keeping the turbines spinning or landing us gently in far-flung places, a job at British Airways is yours to make. We know great things can happen when you're inspired to think big and bring your ambition to work every day, which is why, at British Airways, the sky is never the limit. The role Product Analyst As a Product Analyst within Operations Decision Support, you'll play a key role in driving product success by using data, user insight and technical understanding to shape product decisions and measure impact. This is a hands-on role embedded within the product team. You'll work closely with Product Managers, engineers, UX and system integrators, owning discovery, backlog shaping and continuous optimisation to ensure digital tools and systems deliver measurable business value. What you'll do Apply product discovery and delivery techniques such as workshops, rapid prototyping and iterative feedback to understand user and business needs Lead discovery using technical feasibility analysis and proof-of-concept work, engaging architects and data specialists early to shape scalable solutions Independently develop clear user stories and acceptance criteria aligned to product goals and outcomes Translate technical architecture, API contracts and data flows into clear delivery requirements Collaborate closely with Product Managers, engineering leads, UX and system integrators to deliver end-to-end solutions Coordinate end-to-end testing of product features across integrated systems Analyse product performance, user behaviour and market trends to inform prioritisation and improvement Build strong relationships with stakeholders to support testing, validation and feedback loops Monitor and support product enhancements and fixes, ensuring alignment with design direction and architecture standards Oversee technical scalability and integration readiness for product releases Apply agile and waterfall methodologies as appropriate across the product lifecycle Support backlog refinement, release planning and continuous improvement of product processes Ensure robust documentation and knowledge transfer for ongoing support and future development Define and track product KPIs, delivering insights that drive decisions and measurable impact Independently create clear product decks communicating product overview, roadmap and delivery set-up What you'll bring to British Airways Strong hands-on experience working within digital product teams Confidence engaging with technical detail, including APIs, data flows and system integrations Ability to work closely with engineers and lead technical backlog refinement Strong analytical mindset with comfort working with data and data technologies Clear, structured communicator able to translate complexity into actionable insight Proactive, independent approach with strong ownership and accountability Collaborative mindset and resilience in fast-moving delivery environments Your experience Experience defining technical requirements for digital products in a technical department / company (Essential) 2-4 years of top-tier consulting or product in MANGO (required) Numeric Degree in Computer Science, Engineering, Mathematics, Sciences or equivalent (Required) Knowledge of Operations departments (Desirable) Knowledge of Data products; Data cloud solutions AWS, snowflake, or critical systems (Desirable) Demonstrated success in agile product engineering delivery(Desirable) Project Management accreditation (Desirable) Experience with performance monitoring and observability tools (e.g., Datadog) What we offer We believe that all the people who work with us should feel valued for the part they play. It's one of the reasons our rewards go far beyond a competitive salary. From the day you join us, you'll get access to brilliant staff travel benefits including unlimited basic and premium standby tickets on British Airways flights. You'll also receive up to 30 discounted 'Hotline' airfares per year for yourself, friends, and family. At British Airways you'll have the chance to take on new challenges and move forward in a way that feels right for you. We encourage all those who work for us to consider opportunities right across our business to help you develop and progress. We never stand still, and we don't expect our people to either. Inclusion & Diversity At British Airways we all have a part to play in creating an inclusive place to work. Diverse representation among our people is really important to us and we recognise that all our colleagues are uniquely different and bring their own originality, creativity and identity to work. Inclusion and diversity is a key driver of innovation and we're committed to creating a culture where everyone feels that they can be themselves. We're looking for people from all backgrounds and cultures to join us and be a part of our journey to become a Better BA as we continue to connect Britain with the world and the world with Britain.
May 14, 2026
Full time
A career without limits As the nation's flag carrier, we take great pride in connecting Britain with the world and the world with Britain. It's something we've been doing for over 100 years, ever since we launched the world's first international scheduled air service between London and Paris. This originality has been in our blood since day one. It's the spirit we share with the people that fly with us, our partners, and our colleagues. So, whether you are a reassuring voice on the end of a phone, a smile at the door, under a wing keeping the turbines spinning or landing us gently in far-flung places, a job at British Airways is yours to make. We know great things can happen when you're inspired to think big and bring your ambition to work every day, which is why, at British Airways, the sky is never the limit. The role Product Analyst As a Product Analyst within Operations Decision Support, you'll play a key role in driving product success by using data, user insight and technical understanding to shape product decisions and measure impact. This is a hands-on role embedded within the product team. You'll work closely with Product Managers, engineers, UX and system integrators, owning discovery, backlog shaping and continuous optimisation to ensure digital tools and systems deliver measurable business value. What you'll do Apply product discovery and delivery techniques such as workshops, rapid prototyping and iterative feedback to understand user and business needs Lead discovery using technical feasibility analysis and proof-of-concept work, engaging architects and data specialists early to shape scalable solutions Independently develop clear user stories and acceptance criteria aligned to product goals and outcomes Translate technical architecture, API contracts and data flows into clear delivery requirements Collaborate closely with Product Managers, engineering leads, UX and system integrators to deliver end-to-end solutions Coordinate end-to-end testing of product features across integrated systems Analyse product performance, user behaviour and market trends to inform prioritisation and improvement Build strong relationships with stakeholders to support testing, validation and feedback loops Monitor and support product enhancements and fixes, ensuring alignment with design direction and architecture standards Oversee technical scalability and integration readiness for product releases Apply agile and waterfall methodologies as appropriate across the product lifecycle Support backlog refinement, release planning and continuous improvement of product processes Ensure robust documentation and knowledge transfer for ongoing support and future development Define and track product KPIs, delivering insights that drive decisions and measurable impact Independently create clear product decks communicating product overview, roadmap and delivery set-up What you'll bring to British Airways Strong hands-on experience working within digital product teams Confidence engaging with technical detail, including APIs, data flows and system integrations Ability to work closely with engineers and lead technical backlog refinement Strong analytical mindset with comfort working with data and data technologies Clear, structured communicator able to translate complexity into actionable insight Proactive, independent approach with strong ownership and accountability Collaborative mindset and resilience in fast-moving delivery environments Your experience Experience defining technical requirements for digital products in a technical department / company (Essential) 2-4 years of top-tier consulting or product in MANGO (required) Numeric Degree in Computer Science, Engineering, Mathematics, Sciences or equivalent (Required) Knowledge of Operations departments (Desirable) Knowledge of Data products; Data cloud solutions AWS, snowflake, or critical systems (Desirable) Demonstrated success in agile product engineering delivery(Desirable) Project Management accreditation (Desirable) Experience with performance monitoring and observability tools (e.g., Datadog) What we offer We believe that all the people who work with us should feel valued for the part they play. It's one of the reasons our rewards go far beyond a competitive salary. From the day you join us, you'll get access to brilliant staff travel benefits including unlimited basic and premium standby tickets on British Airways flights. You'll also receive up to 30 discounted 'Hotline' airfares per year for yourself, friends, and family. At British Airways you'll have the chance to take on new challenges and move forward in a way that feels right for you. We encourage all those who work for us to consider opportunities right across our business to help you develop and progress. We never stand still, and we don't expect our people to either. Inclusion & Diversity At British Airways we all have a part to play in creating an inclusive place to work. Diverse representation among our people is really important to us and we recognise that all our colleagues are uniquely different and bring their own originality, creativity and identity to work. Inclusion and diversity is a key driver of innovation and we're committed to creating a culture where everyone feels that they can be themselves. We're looking for people from all backgrounds and cultures to join us and be a part of our journey to become a Better BA as we continue to connect Britain with the world and the world with Britain.
Company Overview COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fuelled by performance and expertise, leading the charge in innovation, efficiency and delivering world class customer service. Be part of the journey. Role Overview and Responsibilities This is an excellent opportunity to take the step from Senior Engineer to a direct Management position and lead a team of 8 to 10 Engineers and Technicians through manufacture and complex electronics assembly of products going into a range of regulated industries. Key Responsibilities: Team leadership: Lead and develop a multi disciplinary team of engineers and technicians while fostering a culture of technical and operational excellence. Continuous Improvement: Drive continuous improvement initiatives using Lean tools and diagnostics to reduce the Cost of Poor Quality (CoPQ) and waste. Technical Ownership: Oversee core assembly modules developing and maintaining KPIs to drive deliverables against key strategic objectives. Yield & Stability: Manage daily yield, driving the elimination of stoppages and downtime to achieve world class OEE (Overall Equipment Effectiveness). SPC & Control: Implement real time Statistical Process Control for critical to quality (CTQ) parameters. Yield Test Correlation: Apply data driven analytics to identify process excursions and drive root cause corrective actions (RCCA). Validation: Manage the industrialisation of process development and test system validation, including Design of Experiments (DoE) and Gage Repeatability and Reproducibility (GR&R) studies for optimisation and repeatability. AE Integration: Coordinate the introduction of automated equipment in process and Test and hardware/software interfaces into the production flow. Cross Functional Collaboration: Work with the Product team during the New Product Introduction (NPI) phase to ensure DfM and DfT capability. Work with Production, Quality and Supply Chain teams to resolve technical challenges and maximise Operational Efficiencies. Production Support: Support day to day production demand NPI activities, collaborating across wider operations. Budget Ownership: With support from your line manager, manage budgets for implementing equipment upgrades and improvements in line with objectives. Qualifications, Skills and Attributes Qualifications required Engineering Degree in a relevant discipline or qualified by experience. An additional certification in Lean Six Sigma, Total Preventative Maintenance (TPM), etc would be beneficial but is not essential to apply. Skills and Experience required A background in microelectronics assembly, packaging and test. Strong experience in a manufacturing or process engineering role. Familiarity with TPM, equipment maintainability, and operational performance metrics (OEE, TTP, DT, etc.). Demonstrated ability to lead engineering teams, manage budgets, and drive change in complex environments. Strong communication and stakeholder management skills. Experience in digital manufacturing or Industry 4.0 implementation. Exposure to industrial investment planning and ROI analysis. Familiar with SPS frameworks or similar operational excellence systems. What We Offer You From this role you will have the opportunity to develop the experience needed to explore and progress to more senior leadership roles within TT Electronics Bedlington, or the wider group, if this is in your own career plan. Competitive Salary Enhanced pension contributions Healthcare cashback plan Employee assistance programme Site incentive plan Financial wellbeing benefit Discounted online and high street shopping and lifestyle vouchers Cycle to Work Scheme Discounted RAC membership Discounted Gym membership 5 weeks (in hours) annual leave plus bank holidays A supportive and friendly working environment with a focus on wellbeing and sustainability TT Electronics are committed to Equality, Diversity and Inclusion and actively encourage applications from under represented groups. Please be aware that many roles at TT Electronics are subject to both security and export control restrictions which means that limitations relating to nationality may apply. As a minimum and after offer stage, all successful candidates must achieve Baseline Personnel Security Standard (BPSS). TT Electronics is unable to sponsor work visas for this role. We hold Health and Safety in the highest regard at TT, with the Wellbeing of our employees our top priority. Any successful candidate will be required to successfully pass a pre employment Drug and Alcohol Screening.
May 14, 2026
Full time
Company Overview COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fuelled by performance and expertise, leading the charge in innovation, efficiency and delivering world class customer service. Be part of the journey. Role Overview and Responsibilities This is an excellent opportunity to take the step from Senior Engineer to a direct Management position and lead a team of 8 to 10 Engineers and Technicians through manufacture and complex electronics assembly of products going into a range of regulated industries. Key Responsibilities: Team leadership: Lead and develop a multi disciplinary team of engineers and technicians while fostering a culture of technical and operational excellence. Continuous Improvement: Drive continuous improvement initiatives using Lean tools and diagnostics to reduce the Cost of Poor Quality (CoPQ) and waste. Technical Ownership: Oversee core assembly modules developing and maintaining KPIs to drive deliverables against key strategic objectives. Yield & Stability: Manage daily yield, driving the elimination of stoppages and downtime to achieve world class OEE (Overall Equipment Effectiveness). SPC & Control: Implement real time Statistical Process Control for critical to quality (CTQ) parameters. Yield Test Correlation: Apply data driven analytics to identify process excursions and drive root cause corrective actions (RCCA). Validation: Manage the industrialisation of process development and test system validation, including Design of Experiments (DoE) and Gage Repeatability and Reproducibility (GR&R) studies for optimisation and repeatability. AE Integration: Coordinate the introduction of automated equipment in process and Test and hardware/software interfaces into the production flow. Cross Functional Collaboration: Work with the Product team during the New Product Introduction (NPI) phase to ensure DfM and DfT capability. Work with Production, Quality and Supply Chain teams to resolve technical challenges and maximise Operational Efficiencies. Production Support: Support day to day production demand NPI activities, collaborating across wider operations. Budget Ownership: With support from your line manager, manage budgets for implementing equipment upgrades and improvements in line with objectives. Qualifications, Skills and Attributes Qualifications required Engineering Degree in a relevant discipline or qualified by experience. An additional certification in Lean Six Sigma, Total Preventative Maintenance (TPM), etc would be beneficial but is not essential to apply. Skills and Experience required A background in microelectronics assembly, packaging and test. Strong experience in a manufacturing or process engineering role. Familiarity with TPM, equipment maintainability, and operational performance metrics (OEE, TTP, DT, etc.). Demonstrated ability to lead engineering teams, manage budgets, and drive change in complex environments. Strong communication and stakeholder management skills. Experience in digital manufacturing or Industry 4.0 implementation. Exposure to industrial investment planning and ROI analysis. Familiar with SPS frameworks or similar operational excellence systems. What We Offer You From this role you will have the opportunity to develop the experience needed to explore and progress to more senior leadership roles within TT Electronics Bedlington, or the wider group, if this is in your own career plan. Competitive Salary Enhanced pension contributions Healthcare cashback plan Employee assistance programme Site incentive plan Financial wellbeing benefit Discounted online and high street shopping and lifestyle vouchers Cycle to Work Scheme Discounted RAC membership Discounted Gym membership 5 weeks (in hours) annual leave plus bank holidays A supportive and friendly working environment with a focus on wellbeing and sustainability TT Electronics are committed to Equality, Diversity and Inclusion and actively encourage applications from under represented groups. Please be aware that many roles at TT Electronics are subject to both security and export control restrictions which means that limitations relating to nationality may apply. As a minimum and after offer stage, all successful candidates must achieve Baseline Personnel Security Standard (BPSS). TT Electronics is unable to sponsor work visas for this role. We hold Health and Safety in the highest regard at TT, with the Wellbeing of our employees our top priority. Any successful candidate will be required to successfully pass a pre employment Drug and Alcohol Screening.
Lead Embedded Software Engineer Location: Ealing Area - With Hybrid Working from Home Salary: Up to 80,000 + Extensive Benefits The Role KO2's client is looking for a Lead Embedded Software Engineer to drive the development of robust, scalable embedded software solutions for next-generation electric products. This role combines hands-on technical delivery with small-team leadership, offering the opportunity to influence architecture, mentor engineers, and shape the future direction of embedded platforms. You will play a key role across the full product lifecycle - from early-stage prototyping and system design through to production, manufacturing, and long-term product support - while helping build engineering best practices and delivery capability within the team. Key Responsibilities Lead the design and development of high-quality embedded software that is efficient, maintainable, scalable, and production-ready Provide technical leadership to a small embedded software team, supporting task planning, technical direction, mentoring, and code reviews Collaborate closely with hardware, systems, and manufacturing teams to support board bring-up, debugging, integration, and system validation Own key architectural decisions, helping define software frameworks, coding standards, development processes, and long-term platform strategy Design, implement, test, and maintain embedded software for internally developed electric systems and connected devices Investigate and resolve complex real-time issues relating to timing, performance, reliability, and signal integrity Support continuous improvement initiatives across tooling, automation, testing, and development workflows Contribute to project planning, technical estimation, risk management, and delivery milestones Champion engineering best practices including documentation, version control, CI/CD, and software quality standards About You Strong commercial experience developing embedded software in C and C++ Proven experience leading or mentoring engineers within a small technical team or project environment Strong understanding of embedded systems architecture and full software development lifecycle practices Experience developing RTOS-based applications Hands-on experience with embedded communication protocols such as BLE, CAN, I2C, UART, or SPI Comfortable working across hardware/software boundaries, including debugging and system integration Experience using version control systems, particularly Git, within collaborative development environments A proactive technical problem-solver with strong analytical and root-cause investigation skills Ability to communicate effectively with both technical and non-technical stakeholders Desirable Skills Exposure to functional safety standards such as ISO 13849 or ISO 26262 Experience with CI/CD pipelines and modern development tooling (e.g. Jenkins, Docker) Familiarity with Python for automation, tooling, or test development Experience contributing to technical roadmaps, architectural strategy, or platform standardisatioN Why Apply? This is an excellent opportunity for a senior embedded engineer ready to step into a lead role - or an existing lead engineer looking for greater technical ownership and influence within an innovative engineering environment developing advanced electric products. Apply today with an up-to-date CV
May 13, 2026
Full time
Lead Embedded Software Engineer Location: Ealing Area - With Hybrid Working from Home Salary: Up to 80,000 + Extensive Benefits The Role KO2's client is looking for a Lead Embedded Software Engineer to drive the development of robust, scalable embedded software solutions for next-generation electric products. This role combines hands-on technical delivery with small-team leadership, offering the opportunity to influence architecture, mentor engineers, and shape the future direction of embedded platforms. You will play a key role across the full product lifecycle - from early-stage prototyping and system design through to production, manufacturing, and long-term product support - while helping build engineering best practices and delivery capability within the team. Key Responsibilities Lead the design and development of high-quality embedded software that is efficient, maintainable, scalable, and production-ready Provide technical leadership to a small embedded software team, supporting task planning, technical direction, mentoring, and code reviews Collaborate closely with hardware, systems, and manufacturing teams to support board bring-up, debugging, integration, and system validation Own key architectural decisions, helping define software frameworks, coding standards, development processes, and long-term platform strategy Design, implement, test, and maintain embedded software for internally developed electric systems and connected devices Investigate and resolve complex real-time issues relating to timing, performance, reliability, and signal integrity Support continuous improvement initiatives across tooling, automation, testing, and development workflows Contribute to project planning, technical estimation, risk management, and delivery milestones Champion engineering best practices including documentation, version control, CI/CD, and software quality standards About You Strong commercial experience developing embedded software in C and C++ Proven experience leading or mentoring engineers within a small technical team or project environment Strong understanding of embedded systems architecture and full software development lifecycle practices Experience developing RTOS-based applications Hands-on experience with embedded communication protocols such as BLE, CAN, I2C, UART, or SPI Comfortable working across hardware/software boundaries, including debugging and system integration Experience using version control systems, particularly Git, within collaborative development environments A proactive technical problem-solver with strong analytical and root-cause investigation skills Ability to communicate effectively with both technical and non-technical stakeholders Desirable Skills Exposure to functional safety standards such as ISO 13849 or ISO 26262 Experience with CI/CD pipelines and modern development tooling (e.g. Jenkins, Docker) Familiarity with Python for automation, tooling, or test development Experience contributing to technical roadmaps, architectural strategy, or platform standardisatioN Why Apply? This is an excellent opportunity for a senior embedded engineer ready to step into a lead role - or an existing lead engineer looking for greater technical ownership and influence within an innovative engineering environment developing advanced electric products. Apply today with an up-to-date CV
As Systems Engineer, you will manage development lifecycle involvement to provide Automated Robotic sample storage systems to deliver cutting edge scientific applications and integrated platforms for biological sample and clinical intelligence. Systems Engineer provide the cohesion and co-ordination between engineering and software disciplines. Developing specifications and leading multidisciplinary teams to clearly communicate the requirements for the Store and capture client requirements. The industries we serve have growing requirements for regulatory quality control (GMP, Medical Devices, ISO etc). The System Engineering role provides opportunity to develop the fully documented lifecycle to support adherence to these standards. What You'll Be Doing Designs, defines and implements complex system requirements for customers and/or prepares studies and analyzes existing systems. Determines system specifications, input/output processes and working parameters for hardware/software compatibility. Coordinates design of subsystems and integration of total system. Serves as the primary technical resource for design, manufacture and debug as the product(s) move to completion. Lead a technical team from concept design through to customer delivery and validation. Communications: Co-ordination/cohesion of engineering disciplines: Mechanical, Electrical, Software and Refrigeration. Direct integration with Test team Communication and project transition with Commissioning and Service Interface with planning and procurement. Involved in Sales Support activities to determine user requirements and develop special features. Customer liaison during projects, providing the main technical contact. What You'll Bring Degree level education in an Engineering discipline Experience in a similar role. System level thinking Prior involvement in projects from design to validation Excellent communications and presentations skills Organisational and Co-ordination skills Project planning (Microsoft Project) MS Office including PPT and Visio Experienced with 3D CAD or AutoLab Specification Writing advantageous
May 13, 2026
Full time
As Systems Engineer, you will manage development lifecycle involvement to provide Automated Robotic sample storage systems to deliver cutting edge scientific applications and integrated platforms for biological sample and clinical intelligence. Systems Engineer provide the cohesion and co-ordination between engineering and software disciplines. Developing specifications and leading multidisciplinary teams to clearly communicate the requirements for the Store and capture client requirements. The industries we serve have growing requirements for regulatory quality control (GMP, Medical Devices, ISO etc). The System Engineering role provides opportunity to develop the fully documented lifecycle to support adherence to these standards. What You'll Be Doing Designs, defines and implements complex system requirements for customers and/or prepares studies and analyzes existing systems. Determines system specifications, input/output processes and working parameters for hardware/software compatibility. Coordinates design of subsystems and integration of total system. Serves as the primary technical resource for design, manufacture and debug as the product(s) move to completion. Lead a technical team from concept design through to customer delivery and validation. Communications: Co-ordination/cohesion of engineering disciplines: Mechanical, Electrical, Software and Refrigeration. Direct integration with Test team Communication and project transition with Commissioning and Service Interface with planning and procurement. Involved in Sales Support activities to determine user requirements and develop special features. Customer liaison during projects, providing the main technical contact. What You'll Bring Degree level education in an Engineering discipline Experience in a similar role. System level thinking Prior involvement in projects from design to validation Excellent communications and presentations skills Organisational and Co-ordination skills Project planning (Microsoft Project) MS Office including PPT and Visio Experienced with 3D CAD or AutoLab Specification Writing advantageous
Job Title: Senior Engineer C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and youll be part of something bigger click apply for full job details
May 13, 2026
Full time
Job Title: Senior Engineer C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and youll be part of something bigger click apply for full job details
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
May 13, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
PowerOn Reliance SCADA Engineer - Wokingham - 6 months - Inside IR35 We are hiring experienced PowerOn Reliance SCADA Engineers to support a major utilities programme, delivering critical system validation and integration across transmission SCADA environments. This role will focus on testing, configuration, and end-to-end validation of GE PowerOn Reliance (PoR) systems, ensuring successful deployment across complex operational landscapes. This is a delivery-focused role requiring strong hands-on expertise in SCADA systems, integration, and testing within live or near-live power environments. Key Responsibilities Design and execute testing and validation across GE PowerOn Reliance (PoR) SCADA and EMS systems Perform functional, non-functional, and integration testing across multiple environments Deliver end-to-end SCADA system validation aligned to business and operational requirements Create and execute detailed test plans, scenarios, and test cases Configure and support PoR components including Application Servers, Database Servers, FEP (Front End Processors), and Historian systems Collaborate with system integrators, vendors, and internal delivery teams to ensure alignment with requirements Support integration of SCADA systems with enterprise applications and external interfaces Act as a subject matter expert across SCADA testing and validation phases Work within Agile teams to support delivery, defect management, and reporting using tools such as JIRA/XRAY Ensure adherence to defined test strategies, standards, and processes Must-Have Experience Strong hands-on experience with GE PowerOn Reliance (PoR) SCADA Experience working within Transmission/Utilities SCADA environments Proven background in SCADA testing including FAT, SIT, UAT, and integration testing Experience in system validation, defect management, and test execution Experience configuring and supporting SCADA/EMS environments Strong knowledge of industry protocols including IEC 101, IEC 104, and IEC 61850 Experience integrating SCADA systems with enterprise platforms and external interfaces Strong understanding of SCADA architecture, data flows, and system dependencies Experience working within Agile environments using tools such as JIRA What's on offer? Day Rate: £425 per day (Inside IR35) Length: 6 months (Extension Potential) Start: ASAP Location: Wokingham (5 Days Onsite)
May 13, 2026
Contractor
PowerOn Reliance SCADA Engineer - Wokingham - 6 months - Inside IR35 We are hiring experienced PowerOn Reliance SCADA Engineers to support a major utilities programme, delivering critical system validation and integration across transmission SCADA environments. This role will focus on testing, configuration, and end-to-end validation of GE PowerOn Reliance (PoR) systems, ensuring successful deployment across complex operational landscapes. This is a delivery-focused role requiring strong hands-on expertise in SCADA systems, integration, and testing within live or near-live power environments. Key Responsibilities Design and execute testing and validation across GE PowerOn Reliance (PoR) SCADA and EMS systems Perform functional, non-functional, and integration testing across multiple environments Deliver end-to-end SCADA system validation aligned to business and operational requirements Create and execute detailed test plans, scenarios, and test cases Configure and support PoR components including Application Servers, Database Servers, FEP (Front End Processors), and Historian systems Collaborate with system integrators, vendors, and internal delivery teams to ensure alignment with requirements Support integration of SCADA systems with enterprise applications and external interfaces Act as a subject matter expert across SCADA testing and validation phases Work within Agile teams to support delivery, defect management, and reporting using tools such as JIRA/XRAY Ensure adherence to defined test strategies, standards, and processes Must-Have Experience Strong hands-on experience with GE PowerOn Reliance (PoR) SCADA Experience working within Transmission/Utilities SCADA environments Proven background in SCADA testing including FAT, SIT, UAT, and integration testing Experience in system validation, defect management, and test execution Experience configuring and supporting SCADA/EMS environments Strong knowledge of industry protocols including IEC 101, IEC 104, and IEC 61850 Experience integrating SCADA systems with enterprise platforms and external interfaces Strong understanding of SCADA architecture, data flows, and system dependencies Experience working within Agile environments using tools such as JIRA What's on offer? Day Rate: £425 per day (Inside IR35) Length: 6 months (Extension Potential) Start: ASAP Location: Wokingham (5 Days Onsite)
Systems Engineer (Requirements & Integration) - Defence/EW Luton (4 days on-site) £605/day (Inside IR35) 12-month contract SC clearance is essential We're looking for an experienced Systems Engineer to support the development of complex defence systems, with a focus on requirements definition, system design, and interface management across a multi-disciplinary engineering environment. This role sits within a high performing team working on Electronic Warfare (EW) systems, offering exposure to cutting edge defence technology and collaboration with leading subject matter experts across domain, product, and engineering disciplines. What you'll be doing Develop and refine system-level requirements from stakeholder needs Support system architecture and interface definition activities Contribute to design integration across multiple engineering domains Work across the full engineering life cycle, including: Integration, Verification & Validation and Qualification support Collaborate closely within an Agile engineering environment Use model-based engineering approaches to support system understanding and design decisions Key skills Security cleared (SC) Strong background in Systems Engineering within Defence, Aerospace, or similar complex environments Experience working across the full engineering life cycle Knowledge of requirements engineering and system modelling approaches MATLAB (modelling/analysis) Cameo Systems Modeler (or similar MBSE tools) Understanding of interface management and system integration Exposure to Agile development environments Defence/Electronic Warfare (EW) domain experience Experience supporting V&V or system qualification activities Additional information This role requires 4-5 days per week on-site in Luton Due to the nature of the work, candidates must be eligible for UK security clearance (or hold current clearance, if applicable)
May 13, 2026
Contractor
Systems Engineer (Requirements & Integration) - Defence/EW Luton (4 days on-site) £605/day (Inside IR35) 12-month contract SC clearance is essential We're looking for an experienced Systems Engineer to support the development of complex defence systems, with a focus on requirements definition, system design, and interface management across a multi-disciplinary engineering environment. This role sits within a high performing team working on Electronic Warfare (EW) systems, offering exposure to cutting edge defence technology and collaboration with leading subject matter experts across domain, product, and engineering disciplines. What you'll be doing Develop and refine system-level requirements from stakeholder needs Support system architecture and interface definition activities Contribute to design integration across multiple engineering domains Work across the full engineering life cycle, including: Integration, Verification & Validation and Qualification support Collaborate closely within an Agile engineering environment Use model-based engineering approaches to support system understanding and design decisions Key skills Security cleared (SC) Strong background in Systems Engineering within Defence, Aerospace, or similar complex environments Experience working across the full engineering life cycle Knowledge of requirements engineering and system modelling approaches MATLAB (modelling/analysis) Cameo Systems Modeler (or similar MBSE tools) Understanding of interface management and system integration Exposure to Agile development environments Defence/Electronic Warfare (EW) domain experience Experience supporting V&V or system qualification activities Additional information This role requires 4-5 days per week on-site in Luton Due to the nature of the work, candidates must be eligible for UK security clearance (or hold current clearance, if applicable)
Assignment Type: Temporary, ongoing basis where you will be engaged via HaysLocation: ChichesterWorking Environment: Site based Pay type: Competitive hourly pay rate Start date: ASAP Our Client The world's pre-eminent super-luxury automotive brand based in Goodwood, near Chichester, West Sussex, comprising its global headquarters and Global Centre of Luxury Manufacturing Excellence. Role Overview This role works as part of a cross-functional project and manufacturing team to manage the successful delivery of new and evolving product content into the manufacturing environment. The position is responsible for implementing product and process changes, including bespoke and special content, while balancing OEM systems and customer requirements and ensuring there is no negative impact on manufacturing KPIs, series production, quality, cost or timing.The role encompasses manufacturing engineering, assembly planning and change governance responsibilities, including the management of special tools, fixtures and equipment, proof of manufacturability, procurement, financial planning, risk management, and coordination across plant, project and supplier interfaces. Key Responsibilities Manufacturing Change & Production Integration Management of the build landscape for production with changing and continuously developing product components, including new product introductions, running changes and base launches Management and implementation of product and process changes during SBWE phases, running changes and base launchesProcessing and implementation of all incoming changes controlled via site change coordination and time-slice measuresEnsuring all changes are delivered with zero negative impact to manufacturing KPIs and series production Tools, Fixtures & Equipment (SBMs / TFEs) Responsibility for implementing manual processes and all special tools, fixtures and equipment required for product and process changesProcurement and proof of ability for functionally and FMK-relevant SBMs (BLUM)Sourcing and coordination of all non-FMK-relevant SBMs within the area of responsibilityCoordination of hardware and equipment requirements planning with plant and project teamsRegular coordination with external partners, including facility manufacturers and tooling suppliers Proof of Manufacturability & Validation Execution of proof of manufacturability activities (Process BI)Evaluation and validation of special tools, fixtures and equipment functionalityProcessing of evaluation orders in cooperation with concept planning, plant, quality and project teams Change Control & Technical Governance Managing technical change requests via consolidation meeting landscapesChairing and leading cross-functional and cross-plant forums to align stakeholders on Bespoke and manufacturing change topicsDriving consensus across engineering, production, purchasing, quality and finance to achieve cost-effective, high-quality solutionsProcessing SBWE steering lists and managing related actionsCreation of TD-TVGs (e.g. for construction deviations)Enhancement of assembly processes in Combi-TVGsIntroduction of essential and team-relevant topics into specialist teams and plant forums Risk Management Risk management responsibility at plant level following evaluation of risk filters (RiFI)Definition, tracking and implementation of mitigation measuresCarrying out RiFI for communal issuesResponsibility for processing plant-specific PQM points, including announcements Financial Planning & Investment Control Planning and control of finances required for processes and project deliveryResponsibility for Product Investment, Structure Investment and Budget planningCost planning and governance of manufacturing change activities Systems, Documentation & Information Management Implementation and management of processes for machine and variant controlUse and support of associated information systems, including PUSY (CAS), MOSIS, SAP and BVISManagement and maintenance of process documentation and manufacturing records Cross-Functional & Interface Coordination Regular coordination with plant interface partners, including Assembly PSPs, production, finance and purchasingCoordination with concept planners, quality, manufacturing engineering and project teamsSupport to production teams in addressing manufacturing challenges and continuous improvement activities Skills, Experience & Qualifications Significant manufacturing and automotive industrial experience, preferably within low-volume or premium manufacturing environmentsExperience in Manufacturing Engineering, Assembly Planning, Production Planning, Logistics or Product EngineeringStrong change and project management experience in a manufacturing environmentProven ability to lead and motivate cross-functional teams without direct authorityDemonstrated experience implementing process improvements and managing process documentationProven background supporting production teams with manufacturing challengesEngineering degree, Mechanical Engineering degree or equivalent (preferred but not essential depending on experience)Manufacturing experience of greater than five years is desiredPrior use of OEM assembly planning systems (e.g. BMW systems) is beneficial but not essential; training will be provided as requiredStrong potential to develop into a future leader of people Training & Development OEM-specific system qualifications may be provided through structured competence management frameworks, including:Introduction programmesTraining needs analysis (BBA)Qualification and development measures Benefits Competitive hourly rate with annual performance-related bonusAccess to a subsidised restaurantHays Go1 training platform with over 70,000 coursesAccess to Ben support services (mental health, legal and financial wellbeing)Local retail and restaurant discounts: 35 days annual leave (including bank holidays) Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 13, 2026
Contractor
Assignment Type: Temporary, ongoing basis where you will be engaged via HaysLocation: ChichesterWorking Environment: Site based Pay type: Competitive hourly pay rate Start date: ASAP Our Client The world's pre-eminent super-luxury automotive brand based in Goodwood, near Chichester, West Sussex, comprising its global headquarters and Global Centre of Luxury Manufacturing Excellence. Role Overview This role works as part of a cross-functional project and manufacturing team to manage the successful delivery of new and evolving product content into the manufacturing environment. The position is responsible for implementing product and process changes, including bespoke and special content, while balancing OEM systems and customer requirements and ensuring there is no negative impact on manufacturing KPIs, series production, quality, cost or timing.The role encompasses manufacturing engineering, assembly planning and change governance responsibilities, including the management of special tools, fixtures and equipment, proof of manufacturability, procurement, financial planning, risk management, and coordination across plant, project and supplier interfaces. Key Responsibilities Manufacturing Change & Production Integration Management of the build landscape for production with changing and continuously developing product components, including new product introductions, running changes and base launches Management and implementation of product and process changes during SBWE phases, running changes and base launchesProcessing and implementation of all incoming changes controlled via site change coordination and time-slice measuresEnsuring all changes are delivered with zero negative impact to manufacturing KPIs and series production Tools, Fixtures & Equipment (SBMs / TFEs) Responsibility for implementing manual processes and all special tools, fixtures and equipment required for product and process changesProcurement and proof of ability for functionally and FMK-relevant SBMs (BLUM)Sourcing and coordination of all non-FMK-relevant SBMs within the area of responsibilityCoordination of hardware and equipment requirements planning with plant and project teamsRegular coordination with external partners, including facility manufacturers and tooling suppliers Proof of Manufacturability & Validation Execution of proof of manufacturability activities (Process BI)Evaluation and validation of special tools, fixtures and equipment functionalityProcessing of evaluation orders in cooperation with concept planning, plant, quality and project teams Change Control & Technical Governance Managing technical change requests via consolidation meeting landscapesChairing and leading cross-functional and cross-plant forums to align stakeholders on Bespoke and manufacturing change topicsDriving consensus across engineering, production, purchasing, quality and finance to achieve cost-effective, high-quality solutionsProcessing SBWE steering lists and managing related actionsCreation of TD-TVGs (e.g. for construction deviations)Enhancement of assembly processes in Combi-TVGsIntroduction of essential and team-relevant topics into specialist teams and plant forums Risk Management Risk management responsibility at plant level following evaluation of risk filters (RiFI)Definition, tracking and implementation of mitigation measuresCarrying out RiFI for communal issuesResponsibility for processing plant-specific PQM points, including announcements Financial Planning & Investment Control Planning and control of finances required for processes and project deliveryResponsibility for Product Investment, Structure Investment and Budget planningCost planning and governance of manufacturing change activities Systems, Documentation & Information Management Implementation and management of processes for machine and variant controlUse and support of associated information systems, including PUSY (CAS), MOSIS, SAP and BVISManagement and maintenance of process documentation and manufacturing records Cross-Functional & Interface Coordination Regular coordination with plant interface partners, including Assembly PSPs, production, finance and purchasingCoordination with concept planners, quality, manufacturing engineering and project teamsSupport to production teams in addressing manufacturing challenges and continuous improvement activities Skills, Experience & Qualifications Significant manufacturing and automotive industrial experience, preferably within low-volume or premium manufacturing environmentsExperience in Manufacturing Engineering, Assembly Planning, Production Planning, Logistics or Product EngineeringStrong change and project management experience in a manufacturing environmentProven ability to lead and motivate cross-functional teams without direct authorityDemonstrated experience implementing process improvements and managing process documentationProven background supporting production teams with manufacturing challengesEngineering degree, Mechanical Engineering degree or equivalent (preferred but not essential depending on experience)Manufacturing experience of greater than five years is desiredPrior use of OEM assembly planning systems (e.g. BMW systems) is beneficial but not essential; training will be provided as requiredStrong potential to develop into a future leader of people Training & Development OEM-specific system qualifications may be provided through structured competence management frameworks, including:Introduction programmesTraining needs analysis (BBA)Qualification and development measures Benefits Competitive hourly rate with annual performance-related bonusAccess to a subsidised restaurantHays Go1 training platform with over 70,000 coursesAccess to Ben support services (mental health, legal and financial wellbeing)Local retail and restaurant discounts: 35 days annual leave (including bank holidays) Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Aim high, go beyond! At Open Cosmos we are solving the world's biggest challenges from space, providing businesses, governments and researchers access to more readily available information than ever before - ready for the challenge? Then read on Working in the Satcom Team The Satcom Team is responsible for modelling, simulating, and continuously optimising the performance of Open Cosmos' satellite communication infrastructure. This includes the space segment, inter-satellite links, terminals, and ground connectivity, ensuring our end-to-end systems deliver reliable, efficient, and scalable service under dynamic conditions. We work with cutting-edge technologies such as digital twins, autonomous networks, and large-scale constellation models. The team plays a key role in design validation, mission planning, and performance-driven engineering decision-making. What will you be doing? As a Verification & Validation Engineer, you will ensure Satcom systems meet mission-critical requirements through continuous, automated validation embedded into agile delivery. You will: Translate high-level system requirements into automated tests that run continuously within our CI/CD pipelines. Contribute to agile planning and refinement, defining testable acceptance criteria before features are implemented. Develop complex validation scenarios incrementally, aligned with evolving system capabilities. Write robust, reusable Python test code using internal automated test frameworks to validate complex system behaviour. Execute automated tests seamlessly across Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) environments. Investigate and debug failed tests, working directly with engineers to resolve issues within sprint cycles. Maintain automated performance and regression test suites, identifying degradations in throughput, latency, or stability immediately after release. Collaborate with the Test Automation Framework team to evolve testing tools, improving test creation, execution, and debugging workflows. Contribute to the continuous improvement of verification practices, metrics, and tooling across Satcom. What You'll bring Strong understanding of system verification and validation within agile delivery environments. A clear grasp of shift-left testing and continuous verification principles. The ability to translate system-level requirements into clear, automated, and verifiable tests. Confidence building automated system and integration tests in Python. Understanding of complex, distributed technical systems and how failures propagate across them. Familiarity with SIL and HIL validation environments. Structured, analytical approaches to debugging test failures and identifying root causes. Ownership of automated performance, regression, and stability testing. Familiarity with CI/CD pipelines and automated test execution. A collaborative approach to improving test frameworks, tools, and validation workflows. This role will be based in the UK or Spain. To apply, you must have the legal right to work in this location. When applying, please submit your CV in English. Why Open Cosmos? Work at the cutting edge of space technology with customers around the globe. A mission-driven company making space accessible to help solve real-world challenges. A diverse, ambitious, and supportive team.
May 13, 2026
Full time
Aim high, go beyond! At Open Cosmos we are solving the world's biggest challenges from space, providing businesses, governments and researchers access to more readily available information than ever before - ready for the challenge? Then read on Working in the Satcom Team The Satcom Team is responsible for modelling, simulating, and continuously optimising the performance of Open Cosmos' satellite communication infrastructure. This includes the space segment, inter-satellite links, terminals, and ground connectivity, ensuring our end-to-end systems deliver reliable, efficient, and scalable service under dynamic conditions. We work with cutting-edge technologies such as digital twins, autonomous networks, and large-scale constellation models. The team plays a key role in design validation, mission planning, and performance-driven engineering decision-making. What will you be doing? As a Verification & Validation Engineer, you will ensure Satcom systems meet mission-critical requirements through continuous, automated validation embedded into agile delivery. You will: Translate high-level system requirements into automated tests that run continuously within our CI/CD pipelines. Contribute to agile planning and refinement, defining testable acceptance criteria before features are implemented. Develop complex validation scenarios incrementally, aligned with evolving system capabilities. Write robust, reusable Python test code using internal automated test frameworks to validate complex system behaviour. Execute automated tests seamlessly across Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) environments. Investigate and debug failed tests, working directly with engineers to resolve issues within sprint cycles. Maintain automated performance and regression test suites, identifying degradations in throughput, latency, or stability immediately after release. Collaborate with the Test Automation Framework team to evolve testing tools, improving test creation, execution, and debugging workflows. Contribute to the continuous improvement of verification practices, metrics, and tooling across Satcom. What You'll bring Strong understanding of system verification and validation within agile delivery environments. A clear grasp of shift-left testing and continuous verification principles. The ability to translate system-level requirements into clear, automated, and verifiable tests. Confidence building automated system and integration tests in Python. Understanding of complex, distributed technical systems and how failures propagate across them. Familiarity with SIL and HIL validation environments. Structured, analytical approaches to debugging test failures and identifying root causes. Ownership of automated performance, regression, and stability testing. Familiarity with CI/CD pipelines and automated test execution. A collaborative approach to improving test frameworks, tools, and validation workflows. This role will be based in the UK or Spain. To apply, you must have the legal right to work in this location. When applying, please submit your CV in English. Why Open Cosmos? Work at the cutting edge of space technology with customers around the globe. A mission-driven company making space accessible to help solve real-world challenges. A diverse, ambitious, and supportive team.
