FLT Counterbalance Driver Runcorn 15.20 per hour 4 on 4 off shift pattern Temporary ongoing Immediate start Introduction Acorn by Synergie are looking for a careful, confident FLT Counterbalance Driver to join their client on an ongoing temporary basis at Whitehouse Industrial Estate in Runcorn. Full training is provided for all truck types, including double forks. Key Duties: Carry out general FLT and production duties. Ensure production lines are supplied with required raw materials. Remove finished products from the production area to storage. Perform hygiene duties. Operate FLT trucks, including double fork trucks (experience desirable but not essential). Requirements: Valid RTITB or ITSSAR counterbalance licence refreshed within the last 3 years. Experience operating counterbalance trucks. Able to work independently or as part of a team with minimal supervision. Flexible, practical, hardworking, with a keen eye for detail and initiative. What We Offer: 4 on 4 off shift pattern: 2 x 12 hour days 6am-6pm. 2 x 12 hour nights 6pm-6am. Followed by 4 days off. Overtime available. All breaks are paid. Weekly pay. Accrued holiday pay. Pension contributions. Access to the Acorn Reward Scheme. Dedicated account manager. Friendly working environment. Free parking. Interested? Apply now or contact Christine at the Acorn by Synergie Widnes branch! Acorn by Synergie acts as an employment business for the supply of temporary workers.
May 06, 2026
Seasonal
FLT Counterbalance Driver Runcorn 15.20 per hour 4 on 4 off shift pattern Temporary ongoing Immediate start Introduction Acorn by Synergie are looking for a careful, confident FLT Counterbalance Driver to join their client on an ongoing temporary basis at Whitehouse Industrial Estate in Runcorn. Full training is provided for all truck types, including double forks. Key Duties: Carry out general FLT and production duties. Ensure production lines are supplied with required raw materials. Remove finished products from the production area to storage. Perform hygiene duties. Operate FLT trucks, including double fork trucks (experience desirable but not essential). Requirements: Valid RTITB or ITSSAR counterbalance licence refreshed within the last 3 years. Experience operating counterbalance trucks. Able to work independently or as part of a team with minimal supervision. Flexible, practical, hardworking, with a keen eye for detail and initiative. What We Offer: 4 on 4 off shift pattern: 2 x 12 hour days 6am-6pm. 2 x 12 hour nights 6pm-6am. Followed by 4 days off. Overtime available. All breaks are paid. Weekly pay. Accrued holiday pay. Pension contributions. Access to the Acorn Reward Scheme. Dedicated account manager. Friendly working environment. Free parking. Interested? Apply now or contact Christine at the Acorn by Synergie Widnes branch! Acorn by Synergie acts as an employment business for the supply of temporary workers.
Sheet Metal Worker (3-Day Weekend) Location: HU9 Area, Hull Pay Rate: 12.71 per hour Working Hours: Monday to Thursday, 06:00 - 16:15 Schedule: 4-day week (3-day weekend every week) Role Overview We are seeking a reliable and skilled Sheet Metal Worker to join our team in the HU9 area of Hull. This is a hands-on role involving the preparation, measurement, and fabrication of sheet metal components to a high standard. Key Responsibilities Measuring and marking out sheet metal according to specifications Cutting materials using appropriate tools and machinery Shaping, forming, and assembling sheet metal parts Reading and interpreting technical drawings and plans Operating machinery safely and efficiently Ensuring all work meets quality and safety standards Maintaining a clean and organised work environment Requirements Previous experience in sheet metal work or a similar manufacturing role preferred Ability to read and understand technical drawings Good attention to detail and accuracy in measurements Experience using hand tools and metalworking machinery Strong work ethic and reliability Ability to work independently and as part of a team Benefits Competitive hourly rate of 12.71 3-day weekend every week (Friday-Sunday off) Consistent full-time hours Opportunity to develop skills in a manufacturing environment If you are interested in the above role please send your cv to (url removed)
May 06, 2026
Full time
Sheet Metal Worker (3-Day Weekend) Location: HU9 Area, Hull Pay Rate: 12.71 per hour Working Hours: Monday to Thursday, 06:00 - 16:15 Schedule: 4-day week (3-day weekend every week) Role Overview We are seeking a reliable and skilled Sheet Metal Worker to join our team in the HU9 area of Hull. This is a hands-on role involving the preparation, measurement, and fabrication of sheet metal components to a high standard. Key Responsibilities Measuring and marking out sheet metal according to specifications Cutting materials using appropriate tools and machinery Shaping, forming, and assembling sheet metal parts Reading and interpreting technical drawings and plans Operating machinery safely and efficiently Ensuring all work meets quality and safety standards Maintaining a clean and organised work environment Requirements Previous experience in sheet metal work or a similar manufacturing role preferred Ability to read and understand technical drawings Good attention to detail and accuracy in measurements Experience using hand tools and metalworking machinery Strong work ethic and reliability Ability to work independently and as part of a team Benefits Competitive hourly rate of 12.71 3-day weekend every week (Friday-Sunday off) Consistent full-time hours Opportunity to develop skills in a manufacturing environment If you are interested in the above role please send your cv to (url removed)
Location: West End, London Start Date: 13th April 2026 Hourly Rate: 14ph We are looking for a Temporary Garment Technologist Admin to join our client who are a premium brand based in the West End! This is an excellent opportunity for someone looking to start or develop their career within garment technology, working within a fast-paced and collaborative head office environment. Reporting into the Senior Garment Technologist, you'll provide efficient administrative and technical support across the menswear product lifecycle, working closely with Technical, Design, Product Development, Buying and Merchandising teams. Key Responsibilities Logging and tracking all sample shipments coming into the business Managing sample administration, tracking and organisation Booking models and assisting with fit sessions where required Supporting the technical team with day-to-day administration Updating metadata and internal critical path systems Assisting with sealing comments and technical documentation Liaising with internal departments and suppliers Carrying out regular store visits to review bulk production and liaise with retail Supporting competitor analysis to ensure the brand remains commercially competitive Who you are A degree or qualification in Fashion Technology, Design, or a related field would be beneficial, but not essential, or a basic understanding of garment technology and manufacturing techniques Excellent communication skills, both written and verbal Team player who collaborates with ease Strong organiser who prioritises with ease and understands the importance of excellent time management The ability to analyse problems and offer solutions Attention to detail is key as this is a fast-paced role Advanced/Intermediate MS Office skills Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
May 06, 2026
Seasonal
Location: West End, London Start Date: 13th April 2026 Hourly Rate: 14ph We are looking for a Temporary Garment Technologist Admin to join our client who are a premium brand based in the West End! This is an excellent opportunity for someone looking to start or develop their career within garment technology, working within a fast-paced and collaborative head office environment. Reporting into the Senior Garment Technologist, you'll provide efficient administrative and technical support across the menswear product lifecycle, working closely with Technical, Design, Product Development, Buying and Merchandising teams. Key Responsibilities Logging and tracking all sample shipments coming into the business Managing sample administration, tracking and organisation Booking models and assisting with fit sessions where required Supporting the technical team with day-to-day administration Updating metadata and internal critical path systems Assisting with sealing comments and technical documentation Liaising with internal departments and suppliers Carrying out regular store visits to review bulk production and liaise with retail Supporting competitor analysis to ensure the brand remains commercially competitive Who you are A degree or qualification in Fashion Technology, Design, or a related field would be beneficial, but not essential, or a basic understanding of garment technology and manufacturing techniques Excellent communication skills, both written and verbal Team player who collaborates with ease Strong organiser who prioritises with ease and understands the importance of excellent time management The ability to analyse problems and offer solutions Attention to detail is key as this is a fast-paced role Advanced/Intermediate MS Office skills Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Quality Supervisor Whitstable, Kent £30k - £40k 30 days annual leave, great development opportunities & early Friday finish A new and exciting opportunity has arisen for a Quality Supervisor to join a fantastic engineering business in the Whitstable area. With no day ever being the same the Quality Supervisor role offers genuine long-term progression and career development within a first-class manufacturing environment. Role & Responsibilities: Process Control and quality plans to reduce variation. Goods in inspection Develop, implement, and maintain quality control procedures and standards. Conduct regular audits of manufacturing processes and products to ensure compliance with quality standards. Analyse quality data and identify trends to clearly establish the root cause of a problem. Knowledge, Skills & Experience: Experience as in quality assurance within a manufacturing environment Experience working with ISO 9001 Strong communicator & proactive worker Benefits: £30k - £40k 30 days annual leave Great development opportunities Early Friday finish How to apply: Suitable candidates for the Quality Supervisor role should apply immediately using the 'Apply Now' button by calling Oliver Broderick on or by sending your CV directly to . We regret that this client is not prepared to sponsor work permit or work permit transfer applications. Candidates must be able to prove their eligibility to work in the UK. Legal and Equality Statement Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 06, 2026
Full time
Quality Supervisor Whitstable, Kent £30k - £40k 30 days annual leave, great development opportunities & early Friday finish A new and exciting opportunity has arisen for a Quality Supervisor to join a fantastic engineering business in the Whitstable area. With no day ever being the same the Quality Supervisor role offers genuine long-term progression and career development within a first-class manufacturing environment. Role & Responsibilities: Process Control and quality plans to reduce variation. Goods in inspection Develop, implement, and maintain quality control procedures and standards. Conduct regular audits of manufacturing processes and products to ensure compliance with quality standards. Analyse quality data and identify trends to clearly establish the root cause of a problem. Knowledge, Skills & Experience: Experience as in quality assurance within a manufacturing environment Experience working with ISO 9001 Strong communicator & proactive worker Benefits: £30k - £40k 30 days annual leave Great development opportunities Early Friday finish How to apply: Suitable candidates for the Quality Supervisor role should apply immediately using the 'Apply Now' button by calling Oliver Broderick on or by sending your CV directly to . We regret that this client is not prepared to sponsor work permit or work permit transfer applications. Candidates must be able to prove their eligibility to work in the UK. Legal and Equality Statement Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Do you have experience with Industrial Sewing Machines ? If so read on, Adecco are proud to be working with a well established company who are seeking a Sewing Machinist to join their expanding team. Location: Southend Salary: Up 35,000 per annum Working days: Monday to Friday 8am till 5pm Duration of contract: Permanent Requirements : Experience with industrial sewing machines Fabric cutting experience and reading technical drawings Knowledge of overlocking (desirable) Duties: Operate sewing machines Cutting and folding material Read drawings in order to complete work Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
May 06, 2026
Full time
Do you have experience with Industrial Sewing Machines ? If so read on, Adecco are proud to be working with a well established company who are seeking a Sewing Machinist to join their expanding team. Location: Southend Salary: Up 35,000 per annum Working days: Monday to Friday 8am till 5pm Duration of contract: Permanent Requirements : Experience with industrial sewing machines Fabric cutting experience and reading technical drawings Knowledge of overlocking (desirable) Duties: Operate sewing machines Cutting and folding material Read drawings in order to complete work Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Interior Trim Planner Assignment Type: Temporary, ongoing via Hays Location: Chichester Working Environment: On-site, office-based Pay Type: Competitive hourly rate Role Overview The Interior Trim Planner role combines manufacturing engineering expertise with structured project management to support the delivery of low-volume, high-value bespoke interior products. You will work closely with engineering, design, quality, and production teams to evaluate new features, guide development, and ensure successful industrialisation and launch of bespoke interior components.You will manage multiple projects concurrently, each ranging from early feasibility through to stable production, ensuring technical quality, cost control, and process readiness throughout the product lifecycle. Key Responsibilities New Product Introduction (NPI) & Feasibility Conduct feasibility and cost evaluations for new bespoke interior features.; Assess manufacturability, visual requirements, and technical constraints in early development stages.Support themed or customer-specific product requests within a low-volume, high-luxury environment. End-to-End Project Management Lead Interior Trim Centre activities through the NPI lifecycle: evaluation, engineering development, prototypes, industrialisation, and launch; Coordinate cross-functional teams and act as the key point of contact for bespoke feature delivery; Manage information flow, risk assessments, and progress reporting to stakeholders. Engineering, Development & Process Industrialisation Participate in engineering and design reviews, conducting risk-based assessments of production processes.Plan and deliver prototype builds, evaluation trials, and initial batch production.Establish stable, repeatable manufacturing processes capable of meeting required volumes.Develop, improve, and industrialise both new and existing processes within the Interior Trim Bespoke Studio. Technical Problem-Solving & Continuous Improvement Perform structured problem-solving using DMAIC methodology.Identify risks and implement mitigation plans to ensure robust product and process quality.Support continuous improvement initiatives aligned with Lean Manufacturing principles. Tooling, Fixtures & Equipment Lead the specification, purchase, and commissioning of jigs, fixtures, tooling, and equipment required to support new product launches. Reporting & Stakeholder Communication Deliver Regular updates, presentations, and reports to stakeholders at all levels.Use internal systems and tools, including PowerPoint, for status communication and documentation. Skills, Experience & Qualifications Essential Experience in a manufacturing engineering environment, ideally automotive, aerospace, or marine.Knowledge of NPI, APQP, and structured project management processes.Strong problem-solving capability with experience handling complex technical issues.Excellent communication and interpersonal skills for cross-functional collaboration.Proficiency in 2D and 3D CAD.Understanding of Lean Manufacturing and continuous improvement techniques.High attention to detail with the ability to manage several projects simultaneously. Desirable Degree in Mechanical Engineering, Manufacturing Engineering, or related discipline. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 06, 2026
Contractor
Interior Trim Planner Assignment Type: Temporary, ongoing via Hays Location: Chichester Working Environment: On-site, office-based Pay Type: Competitive hourly rate Role Overview The Interior Trim Planner role combines manufacturing engineering expertise with structured project management to support the delivery of low-volume, high-value bespoke interior products. You will work closely with engineering, design, quality, and production teams to evaluate new features, guide development, and ensure successful industrialisation and launch of bespoke interior components.You will manage multiple projects concurrently, each ranging from early feasibility through to stable production, ensuring technical quality, cost control, and process readiness throughout the product lifecycle. Key Responsibilities New Product Introduction (NPI) & Feasibility Conduct feasibility and cost evaluations for new bespoke interior features.; Assess manufacturability, visual requirements, and technical constraints in early development stages.Support themed or customer-specific product requests within a low-volume, high-luxury environment. End-to-End Project Management Lead Interior Trim Centre activities through the NPI lifecycle: evaluation, engineering development, prototypes, industrialisation, and launch; Coordinate cross-functional teams and act as the key point of contact for bespoke feature delivery; Manage information flow, risk assessments, and progress reporting to stakeholders. Engineering, Development & Process Industrialisation Participate in engineering and design reviews, conducting risk-based assessments of production processes.Plan and deliver prototype builds, evaluation trials, and initial batch production.Establish stable, repeatable manufacturing processes capable of meeting required volumes.Develop, improve, and industrialise both new and existing processes within the Interior Trim Bespoke Studio. Technical Problem-Solving & Continuous Improvement Perform structured problem-solving using DMAIC methodology.Identify risks and implement mitigation plans to ensure robust product and process quality.Support continuous improvement initiatives aligned with Lean Manufacturing principles. Tooling, Fixtures & Equipment Lead the specification, purchase, and commissioning of jigs, fixtures, tooling, and equipment required to support new product launches. Reporting & Stakeholder Communication Deliver Regular updates, presentations, and reports to stakeholders at all levels.Use internal systems and tools, including PowerPoint, for status communication and documentation. Skills, Experience & Qualifications Essential Experience in a manufacturing engineering environment, ideally automotive, aerospace, or marine.Knowledge of NPI, APQP, and structured project management processes.Strong problem-solving capability with experience handling complex technical issues.Excellent communication and interpersonal skills for cross-functional collaboration.Proficiency in 2D and 3D CAD.Understanding of Lean Manufacturing and continuous improvement techniques.High attention to detail with the ability to manage several projects simultaneously. Desirable Degree in Mechanical Engineering, Manufacturing Engineering, or related discipline. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Ernest Gordon Recruitment Limited
Middlesbrough, Yorkshire
Plant Fitter (Switchgear/Transformers) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers and actuators. This Role would suit a Plant Fitter with a background in Switchgear or Transformers or high voltage or similar. You will also require a full UK Driving License. The Role: Maintenance and Repair of HV Switchgear and automation Equipment Installation of transformers, Actuators and RTUs Field Service The Person: Plant Fitter Industrial Engineer UK Driving License REF: BBBH24273JHD If you're interested in this role, click 'apply now ' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 06, 2026
Full time
Plant Fitter (Switchgear/Transformers) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers and actuators. This Role would suit a Plant Fitter with a background in Switchgear or Transformers or high voltage or similar. You will also require a full UK Driving License. The Role: Maintenance and Repair of HV Switchgear and automation Equipment Installation of transformers, Actuators and RTUs Field Service The Person: Plant Fitter Industrial Engineer UK Driving License REF: BBBH24273JHD If you're interested in this role, click 'apply now ' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
We're looking for experienced Sheet Metal Workers to join a major engineering programme in Glasgow, producing high-quality thin gauge fabrications including ducting, bunk beds, cabinets, wardrobes and specialist interior structures. Requirements: Trade Papers to be provided when submitting application What you'll be doing: Manufacturing and installing ventilation and furniture Working to engineering standards, striving for quality first time Using a range of hand tools Hand skills required for manufacturing and installation purposes Understanding of manufacturing and installation drawing Your skills and experiences: Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Clear understanding of SHE, COSHH risks awareness and manufacturing processes Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc Background in a major construction / manufacturing environment Subject to Security Clearance (BPSS) being awarded
May 05, 2026
Contractor
We're looking for experienced Sheet Metal Workers to join a major engineering programme in Glasgow, producing high-quality thin gauge fabrications including ducting, bunk beds, cabinets, wardrobes and specialist interior structures. Requirements: Trade Papers to be provided when submitting application What you'll be doing: Manufacturing and installing ventilation and furniture Working to engineering standards, striving for quality first time Using a range of hand tools Hand skills required for manufacturing and installation purposes Understanding of manufacturing and installation drawing Your skills and experiences: Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Clear understanding of SHE, COSHH risks awareness and manufacturing processes Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc Background in a major construction / manufacturing environment Subject to Security Clearance (BPSS) being awarded
Great opportunity to work as an FLT Driver for our client's site, which produces a wide range of own-label chilled sauces and soups for major UK retailers and employs over 300 employees, all dedicated to creating high-quality, delicious products. Staffline is recruiting FLT Drivers in Bristol. The rate of pay is: - Days £13.90 per hour - Nights £14.90 per hour This is a full-time role working 4 on 4 off , and the hours of work are: - 6am to 6pm - 6pm to 6am Your Time at Work As an FLT Driver your duties include: - Working in a fast-paced warehouse, handling deliveries, storing goods, picking orders, managing waste, and following FIFO for stock rotation. - Accurately receive and record goods using scanning systems, check quality and expiry dates, label items, and separate allergen materials. - Receiving and storing finished products in the despatch area using system tracking tools. - Picking, packing, wrapping, and labeling customer orders, ensuring accuracy, traceability, and timely loading of vehicles with proper documentation. - Using PPE correctly, maintain equipment, and report any issues. - Following food hygiene and health & safety standards, keeping work areas clean (CAYGO) and adapting to schedule changes. - Following company procedures, report issues, attend training, support new staff, and continuously improve safety and efficiency. Our Perfect Worker Our perfect worker will have good English and maths skills. You will be an excellent team player, show great attention to detail, and have the ability to work in a fast-paced environment. Experience in a similar role and a FLT Counterbalance Licence are required. Key Information and Benefits - Earn £13.90 - £14.90 per hour - 4 on 4 off - Temp to perm opportunity - On-site support from Staffline - Canteen on site - Free car parking on site - PPE provided - Opportunities for overtime Job Ref: 1COMPB About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
May 05, 2026
Seasonal
Great opportunity to work as an FLT Driver for our client's site, which produces a wide range of own-label chilled sauces and soups for major UK retailers and employs over 300 employees, all dedicated to creating high-quality, delicious products. Staffline is recruiting FLT Drivers in Bristol. The rate of pay is: - Days £13.90 per hour - Nights £14.90 per hour This is a full-time role working 4 on 4 off , and the hours of work are: - 6am to 6pm - 6pm to 6am Your Time at Work As an FLT Driver your duties include: - Working in a fast-paced warehouse, handling deliveries, storing goods, picking orders, managing waste, and following FIFO for stock rotation. - Accurately receive and record goods using scanning systems, check quality and expiry dates, label items, and separate allergen materials. - Receiving and storing finished products in the despatch area using system tracking tools. - Picking, packing, wrapping, and labeling customer orders, ensuring accuracy, traceability, and timely loading of vehicles with proper documentation. - Using PPE correctly, maintain equipment, and report any issues. - Following food hygiene and health & safety standards, keeping work areas clean (CAYGO) and adapting to schedule changes. - Following company procedures, report issues, attend training, support new staff, and continuously improve safety and efficiency. Our Perfect Worker Our perfect worker will have good English and maths skills. You will be an excellent team player, show great attention to detail, and have the ability to work in a fast-paced environment. Experience in a similar role and a FLT Counterbalance Licence are required. Key Information and Benefits - Earn £13.90 - £14.90 per hour - 4 on 4 off - Temp to perm opportunity - On-site support from Staffline - Canteen on site - Free car parking on site - PPE provided - Opportunities for overtime Job Ref: 1COMPB About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
Field Sales Executive Bangor (BT19) On behalf of our client, a growing local Engineering business McKinty Associates are seeking to recruit a Field Sales Executive to join their team. This is an excellent opportunity for a motivated individual, ideally with an engineering background, who is looking to build a long-term career in technical sales. The role involves visiting industrial and manufacturing clients across Northern Ireland to promote and sell compressed air and pneumatic solutions. Key Duties: Visit existing and prospective industrial customers Promote and sell: Industrial air compressors Air dryers and filtration systems Pneumatic cylinders, valves, and fittings Compressed air pipework systems Identify and develop new business opportunities Conduct basic site surveys and gather technical requirements Prepare and follow up on quotations Achieve monthly and quarterly sales targets Maintain accurate sales records and CRM updates Build long-term relationships with engineers and maintenance managers Eligibility criteria: HND / BEng / Diploma in Mechanical, Electrical, or related discipline (preferred) Strong communication and interpersonal skills Self-motivated and target-driven Willingness to travel across Northern Ireland Full UK driving licence (essential) Previous sales experience beneficial but not required (full training provided) Ability to work on own initiative and as part of a team. Applications for this role will be considered immediately with a view to placing the right individual ASAP, so please register your interest early. Please note, the opening may close in advance of advertised closing date - this is a guideline only. McKinty Associates Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's & Privacy Policy which can be found on our website.
May 05, 2026
Full time
Field Sales Executive Bangor (BT19) On behalf of our client, a growing local Engineering business McKinty Associates are seeking to recruit a Field Sales Executive to join their team. This is an excellent opportunity for a motivated individual, ideally with an engineering background, who is looking to build a long-term career in technical sales. The role involves visiting industrial and manufacturing clients across Northern Ireland to promote and sell compressed air and pneumatic solutions. Key Duties: Visit existing and prospective industrial customers Promote and sell: Industrial air compressors Air dryers and filtration systems Pneumatic cylinders, valves, and fittings Compressed air pipework systems Identify and develop new business opportunities Conduct basic site surveys and gather technical requirements Prepare and follow up on quotations Achieve monthly and quarterly sales targets Maintain accurate sales records and CRM updates Build long-term relationships with engineers and maintenance managers Eligibility criteria: HND / BEng / Diploma in Mechanical, Electrical, or related discipline (preferred) Strong communication and interpersonal skills Self-motivated and target-driven Willingness to travel across Northern Ireland Full UK driving licence (essential) Previous sales experience beneficial but not required (full training provided) Ability to work on own initiative and as part of a team. Applications for this role will be considered immediately with a view to placing the right individual ASAP, so please register your interest early. Please note, the opening may close in advance of advertised closing date - this is a guideline only. McKinty Associates Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's & Privacy Policy which can be found on our website.
Hays Engineering are working in partnership with a leading manufacturing organisation to recruit an experienced Design Engineer to join an established design team based in Dungannon. This is an excellent opportunity to work on the development of innovative heavy equipment used globally. The successful candidate will play a key role in both the development of new products and the ongoing improvement and maintenance of existing equipment, contributing to the delivery of high quality, world class machinery to an international customer base. Your New Role In this role you will: Produce full 3D designs and complete manufacturing packages, including drawings and Bills of Materials, for both new and existing products Collaborate with cross functional teams to investigate and resolve customer complaints, identifying root causes and implementing effective corrective actions Ensure all designs meet required standards for safety, functionality, performance and reliability Drive continuous improvement through efficient and cost effective design solutions Support the application of modern design practices and Lean manufacturing principles What You'll Need to Succeed To be considered for this role, you should have: Degree level qualification (or equivalent) in Engineering Proven design experience within heavy equipment, mobile crushing or screening machinery (or similar sectors) Strong 3D modelling experience, ideally using Creo, along with familiarity with PDM systems Good technical knowledge of mechanical, electrical and hydraulic systems An understanding of real world operating environments and performance expectations of mobile equipment What You'll Get in Return You will join a forward thinking engineering team within a well established manufacturer offering: A competitive salary and benefits package Exposure to global product development projects A collaborative and innovative working environment Opportunities for professional development and career progression What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 05, 2026
Full time
Hays Engineering are working in partnership with a leading manufacturing organisation to recruit an experienced Design Engineer to join an established design team based in Dungannon. This is an excellent opportunity to work on the development of innovative heavy equipment used globally. The successful candidate will play a key role in both the development of new products and the ongoing improvement and maintenance of existing equipment, contributing to the delivery of high quality, world class machinery to an international customer base. Your New Role In this role you will: Produce full 3D designs and complete manufacturing packages, including drawings and Bills of Materials, for both new and existing products Collaborate with cross functional teams to investigate and resolve customer complaints, identifying root causes and implementing effective corrective actions Ensure all designs meet required standards for safety, functionality, performance and reliability Drive continuous improvement through efficient and cost effective design solutions Support the application of modern design practices and Lean manufacturing principles What You'll Need to Succeed To be considered for this role, you should have: Degree level qualification (or equivalent) in Engineering Proven design experience within heavy equipment, mobile crushing or screening machinery (or similar sectors) Strong 3D modelling experience, ideally using Creo, along with familiarity with PDM systems Good technical knowledge of mechanical, electrical and hydraulic systems An understanding of real world operating environments and performance expectations of mobile equipment What You'll Get in Return You will join a forward thinking engineering team within a well established manufacturer offering: A competitive salary and benefits package Exposure to global product development projects A collaborative and innovative working environment Opportunities for professional development and career progression What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Company: Ball Corporation Title: EHS Manager Location: Milton Keynes, GB, MK15 0DA Position overview: The role manages the plant's environmental, health and safety (EHS), fire safety and property protection (FSPP) sustainability programmes to ensure the safety and well being of all workers and protection of the environment. Also he/she will provide advice and guidance to plant management on EHS, FSPP, sustainability issues. EHS Manager owns proactive management of EHS and FSPP risks to ensure the plant meets its compliance obligations and Ball requirements and implements best practice. The job position coordinates EHS activity, including EHS management systems (ISO and ASI) (certified where applicable). Key responsibilities include: In collaboration with Plant leadership team and Regional EHS, drive delivery of PHC and Global Ball Operational Excellence (BOE) EHS strategy, KPIs and programmes through identification, implementation and monitoring of local initiatives Develop and implement BBS and proactive reporting and engagement initiatives such as near miss, hazard and/or good catch to promote safe behaviours and develop a positive safety culture Identify and ensure compliance with EHS compliance obligations (e.g. laws, regulations, permits, licences etc) and other stakeholder requirements (e.g. FSPP insurance) Ensure plant management and workers are aware of, take ownership and deliver on their respective EHS accountabilities and responsibilities, including deputies to cover absences. Escalate issues promptly to the plant manager and Regional EHS Implement and maintain hazard identification and risk assessment programme that reflects hazards during normal, abnormal and emergency conditions and apply the hierarchy of control. Incorporates the Ball BOE, LiFE and hazard mapping into risk management programmes Identify and assess environment aspects and manage significant impacts under normal, abnormal and emergency conditions including emissions to air, waste, water, wastewater, energy and VOCs. Implement programs to manage significant impacts such as waste minimisation management strategy, pollution prevention, ecological issues. Manage environmental protection infrastructure Manage the timely reporting, recording, investigation and identification of root causes of EHS incidents and complaints along with oversight of corrective actions including Global reporting via Enablon and Alerts Implement monitoring and inspection programmes to check compliance with regulations, permits/licences, management systems, procedures Work with functional department leaders to develop and implement EHS programmes, requirements, rules, procedures, systems to manage EHS risk and meet all EHS requirements and drive continuous improvement Establish and implement robust communication and consultation channels to raise awareness, drive engagement, provide information on EHS issues including oversight of the EHS committee and liaison with Safety Representatives Implement and maintain integrated EHS management systems (and where applicable maintain certification to ISO 14001, ISO 45001, BRC, food safety standards and integrated with ISO 9001) including oversight of external and internal audits, FSPP surveys and management reviews Implement occupational / industrial hygiene, occupational health and well being programmes in accordance with identified risks and legal requirements in consultation with HR and external providers Act as primary liaison with regulatory authorities and other external stakeholders (for example FSPP insurers, auditors) and internal stakeholders (Regional and Global EHS, Group Insurance, Group Security) and ensure their requirements and reporting are dealt with efficiently What are we looking for? Relevant EHS qualification to a high level (minimum diploma or local equivalent) including relevant qualification stipulated in the country of operation Alternatively Engineering qualification with relevant experience of at least 3 years of experience in an EHS managerial role in manufacturing, heavy engineering, construction or similar industry Proven EHS management experience in a similar industry with proactive shopfloor engagement and comprehensive knowledge of EHS risks and issues At least 10 years of EHS working experience Comprehensive knowledge of EHS legislative requirements Working knowledge of implementing Behavioural based safety programmes Managing fire safety and property protection insurance risks Fluent in written and spoken English Ball Corporation is an Equal Opportunity Employer. We actively encourage applications from everybody, regardless of gender, age, ethnicity, faith, ability, or orientation. When you join Ball you belong to a team of over 16,000 members worldwide. Our products range from infinitely recyclable aluminium cans, cups to aerosol bottles solutions that enable our customers to contribute to a better world.
May 05, 2026
Full time
Company: Ball Corporation Title: EHS Manager Location: Milton Keynes, GB, MK15 0DA Position overview: The role manages the plant's environmental, health and safety (EHS), fire safety and property protection (FSPP) sustainability programmes to ensure the safety and well being of all workers and protection of the environment. Also he/she will provide advice and guidance to plant management on EHS, FSPP, sustainability issues. EHS Manager owns proactive management of EHS and FSPP risks to ensure the plant meets its compliance obligations and Ball requirements and implements best practice. The job position coordinates EHS activity, including EHS management systems (ISO and ASI) (certified where applicable). Key responsibilities include: In collaboration with Plant leadership team and Regional EHS, drive delivery of PHC and Global Ball Operational Excellence (BOE) EHS strategy, KPIs and programmes through identification, implementation and monitoring of local initiatives Develop and implement BBS and proactive reporting and engagement initiatives such as near miss, hazard and/or good catch to promote safe behaviours and develop a positive safety culture Identify and ensure compliance with EHS compliance obligations (e.g. laws, regulations, permits, licences etc) and other stakeholder requirements (e.g. FSPP insurance) Ensure plant management and workers are aware of, take ownership and deliver on their respective EHS accountabilities and responsibilities, including deputies to cover absences. Escalate issues promptly to the plant manager and Regional EHS Implement and maintain hazard identification and risk assessment programme that reflects hazards during normal, abnormal and emergency conditions and apply the hierarchy of control. Incorporates the Ball BOE, LiFE and hazard mapping into risk management programmes Identify and assess environment aspects and manage significant impacts under normal, abnormal and emergency conditions including emissions to air, waste, water, wastewater, energy and VOCs. Implement programs to manage significant impacts such as waste minimisation management strategy, pollution prevention, ecological issues. Manage environmental protection infrastructure Manage the timely reporting, recording, investigation and identification of root causes of EHS incidents and complaints along with oversight of corrective actions including Global reporting via Enablon and Alerts Implement monitoring and inspection programmes to check compliance with regulations, permits/licences, management systems, procedures Work with functional department leaders to develop and implement EHS programmes, requirements, rules, procedures, systems to manage EHS risk and meet all EHS requirements and drive continuous improvement Establish and implement robust communication and consultation channels to raise awareness, drive engagement, provide information on EHS issues including oversight of the EHS committee and liaison with Safety Representatives Implement and maintain integrated EHS management systems (and where applicable maintain certification to ISO 14001, ISO 45001, BRC, food safety standards and integrated with ISO 9001) including oversight of external and internal audits, FSPP surveys and management reviews Implement occupational / industrial hygiene, occupational health and well being programmes in accordance with identified risks and legal requirements in consultation with HR and external providers Act as primary liaison with regulatory authorities and other external stakeholders (for example FSPP insurers, auditors) and internal stakeholders (Regional and Global EHS, Group Insurance, Group Security) and ensure their requirements and reporting are dealt with efficiently What are we looking for? Relevant EHS qualification to a high level (minimum diploma or local equivalent) including relevant qualification stipulated in the country of operation Alternatively Engineering qualification with relevant experience of at least 3 years of experience in an EHS managerial role in manufacturing, heavy engineering, construction or similar industry Proven EHS management experience in a similar industry with proactive shopfloor engagement and comprehensive knowledge of EHS risks and issues At least 10 years of EHS working experience Comprehensive knowledge of EHS legislative requirements Working knowledge of implementing Behavioural based safety programmes Managing fire safety and property protection insurance risks Fluent in written and spoken English Ball Corporation is an Equal Opportunity Employer. We actively encourage applications from everybody, regardless of gender, age, ethnicity, faith, ability, or orientation. When you join Ball you belong to a team of over 16,000 members worldwide. Our products range from infinitely recyclable aluminium cans, cups to aerosol bottles solutions that enable our customers to contribute to a better world.
Great opportunity to work as a Senior Production Operative for our client - a leading national bakery. Staffline is recruiting a Senior Production Operative based in Milton Keynes. The rate of pay is £14.25- £28.77 per hour. Overtime is available and is paid at time and a half. This is a full-time role working rotating shifts, 3 on 3 off . The hours of work are: - 6am to 6pm - 6pm to 6am Applicants must send their CV to be considered for this position. Your Time at Work As a Senior Production Operative, your duties include: - Working in low-risk/high-risk/enclosed packing areas preparing raw materials, mixing, processing, slicing, and cooling products for Packing and Packing product - Ensuring that all production activities are carried out safely, effectively, and efficiently to produce safe and legal products - Reporting any breakdowns and ensuring procedures are followed accordingly - Weighing up ingredients prior to mixing - Carrying out any other reasonable duties within the production area - Ensuring that you fully conform to health & safety guidelines There will be some lifting involved in this role. Our Perfect Worker Our perfect worker will show strong attention to detail and accuracy. You will also have good written and verbal communication skills. Experience in a similar role is required. Key Information and Benefits - Earn £14.25- £28.77 per hour - Opportunities for overtime - Shifts: 3 on 3 off - Temp to perm opportunity - OnSite support from Staffline - Canteen on site - Free car parking on site - Good links to public transport - PPE provided Job Ref: 1DDMK About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
May 05, 2026
Seasonal
Great opportunity to work as a Senior Production Operative for our client - a leading national bakery. Staffline is recruiting a Senior Production Operative based in Milton Keynes. The rate of pay is £14.25- £28.77 per hour. Overtime is available and is paid at time and a half. This is a full-time role working rotating shifts, 3 on 3 off . The hours of work are: - 6am to 6pm - 6pm to 6am Applicants must send their CV to be considered for this position. Your Time at Work As a Senior Production Operative, your duties include: - Working in low-risk/high-risk/enclosed packing areas preparing raw materials, mixing, processing, slicing, and cooling products for Packing and Packing product - Ensuring that all production activities are carried out safely, effectively, and efficiently to produce safe and legal products - Reporting any breakdowns and ensuring procedures are followed accordingly - Weighing up ingredients prior to mixing - Carrying out any other reasonable duties within the production area - Ensuring that you fully conform to health & safety guidelines There will be some lifting involved in this role. Our Perfect Worker Our perfect worker will show strong attention to detail and accuracy. You will also have good written and verbal communication skills. Experience in a similar role is required. Key Information and Benefits - Earn £14.25- £28.77 per hour - Opportunities for overtime - Shifts: 3 on 3 off - Temp to perm opportunity - OnSite support from Staffline - Canteen on site - Free car parking on site - Good links to public transport - PPE provided Job Ref: 1DDMK About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline.
Harlow Salary - Negotiable DOE Monday - Thursday night shift Your new role: You will be joining a nationally known manufacturing business specialising in the production of a range of products used in the retail, hospitality and similar industries. Due to continuous expansion, the business is now looking for a Press Brake Operator to join their shop floor team, on the night shift. Key Responsibilities& Duties: Set up and operate press brake machines, including tool changing and adjustments. Read and interpret engineering drawings to accurately produce metal components. Perform routine maintenance checks on equipment to ensure optimal performance. Work with tight tolerances to meet customer specifications and demands. Have a good understanding of sheet metal fabrication processes and experience in laser/punch manufacturing with various metals such as mild steel and stainless steel. This is just a summed-up list, and other duties will be required. Experience & Skills needed: Experience using press brakes within a manufacturing environment Ability to work to engineering drawings and specifications Experience in a manufacturing or production environment Experience working to Health & safety and quality standards. Ability to work alone or within a team environment. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 05, 2026
Full time
Harlow Salary - Negotiable DOE Monday - Thursday night shift Your new role: You will be joining a nationally known manufacturing business specialising in the production of a range of products used in the retail, hospitality and similar industries. Due to continuous expansion, the business is now looking for a Press Brake Operator to join their shop floor team, on the night shift. Key Responsibilities& Duties: Set up and operate press brake machines, including tool changing and adjustments. Read and interpret engineering drawings to accurately produce metal components. Perform routine maintenance checks on equipment to ensure optimal performance. Work with tight tolerances to meet customer specifications and demands. Have a good understanding of sheet metal fabrication processes and experience in laser/punch manufacturing with various metals such as mild steel and stainless steel. This is just a summed-up list, and other duties will be required. Experience & Skills needed: Experience using press brakes within a manufacturing environment Ability to work to engineering drawings and specifications Experience in a manufacturing or production environment Experience working to Health & safety and quality standards. Ability to work alone or within a team environment. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Mechanical Design Engineer required for long term contract based out of Stevenage or Bristol. 4 days on site 1 remote. Skillset/experience required: Experience using Creo 3D design tool Knowledge of several of the following: Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Tooling/fixtures design Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. An appreciation of other engineering areas/domains. Responsibilities: Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
May 05, 2026
Contractor
Mechanical Design Engineer required for long term contract based out of Stevenage or Bristol. 4 days on site 1 remote. Skillset/experience required: Experience using Creo 3D design tool Knowledge of several of the following: Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Tooling/fixtures design Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. An appreciation of other engineering areas/domains. Responsibilities: Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Baltic Recruitment Services Ltd
North Shields, Tyne And Wear
Production Operatives - North Shields Baltic Recruitment are currently seeking several enthusiastic Warehouse Operatives for our client based in North Shields, Tyne and Wear. Key Responsibilities: Picking & Packing orders for customers Placing receipted goods into the correct locations Always maintain good housekeeping Ability to work towards targets Be able to work off a headset to pick items Pay: 12.71ph basic rate 18 overtime rate for anything worked over 47.5 hours Shift: Day shift, between the hours of 6am - 7pm Person Specification Ability to carry out tasks and functions as requested by team leaders/supervisors Understand the importance of working as a team to achieve productivity standards Awareness of the importance of customer service and satisfaction Be professional and possess a polite and positive attitude Problem solving skills Strong organisation skills and being able to work flexibly and to deadlines Understand the importance of Health & Safety If you want to apply or want more information, please call the office on (phone number removed) If this job isn't quite right for you but you are looking for a new role, please contact us to see how can help. We also recruit in surrounding areas for warehouse operatives, pickers and packers, production operatives and much more! Baltic Recruitment acts as an employment agency for Temporary and Permanent recruitment and as an employment business for supply of temporary workers. By applying for this job, you accept T&C's, privacy policy and disclaimers which can be found on our website.
May 05, 2026
Seasonal
Production Operatives - North Shields Baltic Recruitment are currently seeking several enthusiastic Warehouse Operatives for our client based in North Shields, Tyne and Wear. Key Responsibilities: Picking & Packing orders for customers Placing receipted goods into the correct locations Always maintain good housekeeping Ability to work towards targets Be able to work off a headset to pick items Pay: 12.71ph basic rate 18 overtime rate for anything worked over 47.5 hours Shift: Day shift, between the hours of 6am - 7pm Person Specification Ability to carry out tasks and functions as requested by team leaders/supervisors Understand the importance of working as a team to achieve productivity standards Awareness of the importance of customer service and satisfaction Be professional and possess a polite and positive attitude Problem solving skills Strong organisation skills and being able to work flexibly and to deadlines Understand the importance of Health & Safety If you want to apply or want more information, please call the office on (phone number removed) If this job isn't quite right for you but you are looking for a new role, please contact us to see how can help. We also recruit in surrounding areas for warehouse operatives, pickers and packers, production operatives and much more! Baltic Recruitment acts as an employment agency for Temporary and Permanent recruitment and as an employment business for supply of temporary workers. By applying for this job, you accept T&C's, privacy policy and disclaimers which can be found on our website.
Health and Safety Manager Location: West London (with international travel) Salary: Up to 65,000 plus benefits Irwin and Colton are pleased to have been engaged by one of the world's leading sports and entertainment organisations who are looking to bring on board a new Health and Safety Manager. The vacancy is new to the team with a focus across both the corporate real estate side to the business as well as the live events which take place throughout the annual season (both UK-based and internationally). The role will also report to the Senior Health and Safety Manager. This is a fantastic opportunity to join a growing health and safety team, looking to drive cultural change across the board, and to work in a professional and fast-paced working environment. Responsibilities of the Health and Safety Manager will include: Engaging with key stakeholders to drive a positive health and safety culture, from employees right through to senior management Supporting the wider business units on the development and delivery of operational safety protocol; identifying opportunities to enhance the effectiveness of the health and safety function internally and externally with clients Assessment and development on the integration of ISO-45001 to ensure that it reflects best practice To analyse risk across the critical working environment and to create change to mitigate risks Ensuring contractors on-sites are compliant to agreed legislation and company guidelines The successful Health and Safety Manager will have: NEBOSH general certificate (or equivalent) and relevant membership of a professional body (Diploma is preferred) Proven experience within sports, events, media, production and/or hospitality Experience in influencing, engaging, and liaising with senior management to create cultural change on safety Strong working understanding of relevant ISO systems (ISO 45001, 14001, and 9001) Comfortable operating in a fast-paced environment Happy to commit to international travel when necessary This is an excellent opportunity to join an extremely fast-growing and well renowned organisation with a long history and strong heritage, and brilliant retention. For more information on this opportunity or to discuss your next career move, contact Matthew Cathcart on (0) (phone number removed) or apply here. Irwin and Colton are a specialist Health and Safety recruitment company, based in the Southeast of England we recruit across the UK. We recruit all roles in the health and safety industry from Health and Safety Manager, Health and Safety Director to Health and Safety Advisor positions. Irwin and Colton Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website (url removed).
May 05, 2026
Full time
Health and Safety Manager Location: West London (with international travel) Salary: Up to 65,000 plus benefits Irwin and Colton are pleased to have been engaged by one of the world's leading sports and entertainment organisations who are looking to bring on board a new Health and Safety Manager. The vacancy is new to the team with a focus across both the corporate real estate side to the business as well as the live events which take place throughout the annual season (both UK-based and internationally). The role will also report to the Senior Health and Safety Manager. This is a fantastic opportunity to join a growing health and safety team, looking to drive cultural change across the board, and to work in a professional and fast-paced working environment. Responsibilities of the Health and Safety Manager will include: Engaging with key stakeholders to drive a positive health and safety culture, from employees right through to senior management Supporting the wider business units on the development and delivery of operational safety protocol; identifying opportunities to enhance the effectiveness of the health and safety function internally and externally with clients Assessment and development on the integration of ISO-45001 to ensure that it reflects best practice To analyse risk across the critical working environment and to create change to mitigate risks Ensuring contractors on-sites are compliant to agreed legislation and company guidelines The successful Health and Safety Manager will have: NEBOSH general certificate (or equivalent) and relevant membership of a professional body (Diploma is preferred) Proven experience within sports, events, media, production and/or hospitality Experience in influencing, engaging, and liaising with senior management to create cultural change on safety Strong working understanding of relevant ISO systems (ISO 45001, 14001, and 9001) Comfortable operating in a fast-paced environment Happy to commit to international travel when necessary This is an excellent opportunity to join an extremely fast-growing and well renowned organisation with a long history and strong heritage, and brilliant retention. For more information on this opportunity or to discuss your next career move, contact Matthew Cathcart on (0) (phone number removed) or apply here. Irwin and Colton are a specialist Health and Safety recruitment company, based in the Southeast of England we recruit across the UK. We recruit all roles in the health and safety industry from Health and Safety Manager, Health and Safety Director to Health and Safety Advisor positions. Irwin and Colton Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website (url removed).
Fine Limit Sheet Metal Fabricator Precision Engineering We're looking for an experienced Sheet Metal Fabricator who takes pride in high-precision work and enjoys working on complex, tight-tolerance components. This is a hands-on role within a specialist fabrication environment, producing detailed parts for highly regulated industries. You'll be working with a wide range of materials - including more challenging alloys - where quality and accuracy are critical. The Opportunity You'll play a key role in transforming flat sheet into finished components, often working from detailed drawings but also applying your own judgement and craftsmanship where required. Core Responsibilities Manufacture precision sheet metal components to tight tolerances using a range of fabrication techniques Carry out bending, forming, cutting, and assembly operations across a variety of materials Interpret engineering drawings, sketches, and shop floor instructions to produce accurate parts Set up and operate fabrication machinery such as press brakes, fly presses, and finishing equipment Perform hand forming and development work on prototype or low-volume components Complete finishing processes including deburring, trimming, drilling, filing, and grinding Inspect components throughout the process to ensure compliance with specification Maintain tools, jigs, and equipment in good working order and ready for use What We're Looking For Strong background in fine limit sheet metal work within a precision manufacturing setting Proven ability to work to tight tolerances across complex components Confident reading and interpreting technical engineering drawings Experience working with a variety of materials including aluminium and stainless steel Ability to work independently and maintain high standards under minimal supervision Highly Desirable Previous experience within aerospace, defence, or other highly regulated industries Familiarity with exotic materials such as titanium and nickel-based alloys (e.g. Inconel) Skilled in manual forming techniques for bespoke or prototype work Experience assembling fabricated parts alongside machined components Why Consider This Role Work on complex, high-specification components rather than repetitive production Opportunity to utilise and develop advanced fabrication skills Join a team where craftsmanship and precision are genuinely valued How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.
May 05, 2026
Full time
Fine Limit Sheet Metal Fabricator Precision Engineering We're looking for an experienced Sheet Metal Fabricator who takes pride in high-precision work and enjoys working on complex, tight-tolerance components. This is a hands-on role within a specialist fabrication environment, producing detailed parts for highly regulated industries. You'll be working with a wide range of materials - including more challenging alloys - where quality and accuracy are critical. The Opportunity You'll play a key role in transforming flat sheet into finished components, often working from detailed drawings but also applying your own judgement and craftsmanship where required. Core Responsibilities Manufacture precision sheet metal components to tight tolerances using a range of fabrication techniques Carry out bending, forming, cutting, and assembly operations across a variety of materials Interpret engineering drawings, sketches, and shop floor instructions to produce accurate parts Set up and operate fabrication machinery such as press brakes, fly presses, and finishing equipment Perform hand forming and development work on prototype or low-volume components Complete finishing processes including deburring, trimming, drilling, filing, and grinding Inspect components throughout the process to ensure compliance with specification Maintain tools, jigs, and equipment in good working order and ready for use What We're Looking For Strong background in fine limit sheet metal work within a precision manufacturing setting Proven ability to work to tight tolerances across complex components Confident reading and interpreting technical engineering drawings Experience working with a variety of materials including aluminium and stainless steel Ability to work independently and maintain high standards under minimal supervision Highly Desirable Previous experience within aerospace, defence, or other highly regulated industries Familiarity with exotic materials such as titanium and nickel-based alloys (e.g. Inconel) Skilled in manual forming techniques for bespoke or prototype work Experience assembling fabricated parts alongside machined components Why Consider This Role Work on complex, high-specification components rather than repetitive production Opportunity to utilise and develop advanced fabrication skills Join a team where craftsmanship and precision are genuinely valued How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.
Join Our Team as a Manufacturing Technician! Are you ready to make a difference in the life sciences industry? We are seeking a dedicated and enthusiastic Manufacturing Technician to join our dynamic team at our facility located in Edgbaston, Birmingham. This is your chance to play a crucial role in the production of world-leading diagnostic products! Position Details: Job Title: Manufacturing Technician Location: Edgbaston Contract Type: Temporary (6 months) Hours: Full Time (Mon-Fri, 07:00 - 15:30) Hourly Rate: 13.53 Why Join Us? At our client, you will be part of a passionate manufacturing team dedicated to driving global progress through innovative diagnostic solutions. Your contributions will help maintain our reputation for impeccable performance and groundbreaking ideas. Key Responsibilities: Manage Your Workload: Independently handle your own tasks according to a published plan. Inventory Management: Ensure materials are available and transactions are completed to meet work requirements. Scheduled Activities: Own and perform scheduled tasks for designated equipment, area, or function. Drive Improvements: Proactively identify and implement initiatives to enhance work processes. Quality Assurance: Take full responsibility for your work to ensure it is completed 'right first time'. Flexibility: Be prepared to perform any other reasonable duties as required. What We're Looking For: Required Skills: Minimum of 1 year of experience in a manufacturing, operations, production, or lab setting. Good verbal and written communication skills. Proficient in IT, especially Microsoft Office and Excel. Ability to learn, understand, and carry out instructions effectively. Strong multitasking and prioritisation abilities. Preferred Experience: Previous experience in a cGMP environment and workload management. Don't miss out on this opportunity to be a part of a team that's making a real impact in the life sciences field. Apply now and take your career to the next level with us! We look forward to hearing from you! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
May 05, 2026
Seasonal
Join Our Team as a Manufacturing Technician! Are you ready to make a difference in the life sciences industry? We are seeking a dedicated and enthusiastic Manufacturing Technician to join our dynamic team at our facility located in Edgbaston, Birmingham. This is your chance to play a crucial role in the production of world-leading diagnostic products! Position Details: Job Title: Manufacturing Technician Location: Edgbaston Contract Type: Temporary (6 months) Hours: Full Time (Mon-Fri, 07:00 - 15:30) Hourly Rate: 13.53 Why Join Us? At our client, you will be part of a passionate manufacturing team dedicated to driving global progress through innovative diagnostic solutions. Your contributions will help maintain our reputation for impeccable performance and groundbreaking ideas. Key Responsibilities: Manage Your Workload: Independently handle your own tasks according to a published plan. Inventory Management: Ensure materials are available and transactions are completed to meet work requirements. Scheduled Activities: Own and perform scheduled tasks for designated equipment, area, or function. Drive Improvements: Proactively identify and implement initiatives to enhance work processes. Quality Assurance: Take full responsibility for your work to ensure it is completed 'right first time'. Flexibility: Be prepared to perform any other reasonable duties as required. What We're Looking For: Required Skills: Minimum of 1 year of experience in a manufacturing, operations, production, or lab setting. Good verbal and written communication skills. Proficient in IT, especially Microsoft Office and Excel. Ability to learn, understand, and carry out instructions effectively. Strong multitasking and prioritisation abilities. Preferred Experience: Previous experience in a cGMP environment and workload management. Don't miss out on this opportunity to be a part of a team that's making a real impact in the life sciences field. Apply now and take your career to the next level with us! We look forward to hearing from you! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
The Company You will be joining a well established manufacturing organisation that places people at the centre of its culture. The business is built on values such as respect, integrity and continuous improvement, and it is committed to creating an inclusive environment where every team member feels supported, safe and empowered to succeed. The company operates with a strong focus on safety, innovation and long term sustainability, and it encourages all employees to contribute ideas, develop their skills and grow within the organisation. The Role As a Material Handler, you will play a vital part in ensuring the smooth and efficient flow of materials throughout the fabrication process. You will work closely with the production team to deliver parts accurately and on time, supporting the wider operation by processing materials received from cutting and stores, operating equipment safely and maintaining compliance with inventory and environmental procedures. Your contribution will be essential in keeping production running effectively and ensuring high standards of organisation and housekeeping across the site. Requirements To succeed in this position, you will bring experience gained within a fast moving manufacturing environment and have experience using a pallet truck. You will have a solid understanding of inventory control and be confident working both independently and as part of a team. The role requires someone who can use initiative, adapt to changing priorities and approach challenges with a problem solving mindset. A commitment to continuous improvement, strong self motivation and the ability to maintain a clean, safe working environment will be key to thriving in this role. What's in It for You You will be joining an organisation that invests in its people and offers a wide range of benefits designed to support your wellbeing and career development. You can expect a competitive salary, bonus opportunities, healthcare support, generous holiday entitlement, pension contributions and life assurance. The company also provides access to extensive learning and development programmes, accredited training, on site parking and a variety of additional employee benefits aimed at helping you reach your full potential. This is an opportunity to build a rewarding career within a forward thinking and supportive environment. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 05, 2026
Full time
The Company You will be joining a well established manufacturing organisation that places people at the centre of its culture. The business is built on values such as respect, integrity and continuous improvement, and it is committed to creating an inclusive environment where every team member feels supported, safe and empowered to succeed. The company operates with a strong focus on safety, innovation and long term sustainability, and it encourages all employees to contribute ideas, develop their skills and grow within the organisation. The Role As a Material Handler, you will play a vital part in ensuring the smooth and efficient flow of materials throughout the fabrication process. You will work closely with the production team to deliver parts accurately and on time, supporting the wider operation by processing materials received from cutting and stores, operating equipment safely and maintaining compliance with inventory and environmental procedures. Your contribution will be essential in keeping production running effectively and ensuring high standards of organisation and housekeeping across the site. Requirements To succeed in this position, you will bring experience gained within a fast moving manufacturing environment and have experience using a pallet truck. You will have a solid understanding of inventory control and be confident working both independently and as part of a team. The role requires someone who can use initiative, adapt to changing priorities and approach challenges with a problem solving mindset. A commitment to continuous improvement, strong self motivation and the ability to maintain a clean, safe working environment will be key to thriving in this role. What's in It for You You will be joining an organisation that invests in its people and offers a wide range of benefits designed to support your wellbeing and career development. You can expect a competitive salary, bonus opportunities, healthcare support, generous holiday entitlement, pension contributions and life assurance. The company also provides access to extensive learning and development programmes, accredited training, on site parking and a variety of additional employee benefits aimed at helping you reach your full potential. This is an opportunity to build a rewarding career within a forward thinking and supportive environment. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
