Mobile Vehicle Engineer - Gloucester Day shifts Monday to Friday Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts - 45 hour week Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of Gloucester and surrounding We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker
May 07, 2026
Full time
Mobile Vehicle Engineer - Gloucester Day shifts Monday to Friday Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts - 45 hour week Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of Gloucester and surrounding We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker
We Build Recruitment is looking for an experienced Labour Manager to lead and develop our Mechanical & Electrical (M&E) labour desk. This role focuses on supplying high-quality M&E operatives to construction and building services projects, ensuring clients receive skilled, compliant, and reliable personnel. You will play a key role in building a strong network of electricians, plumbers, HVAC engineers, and associated trades, while maintaining excellent service delivery to clients across commercial, residential, and industrial projects. Key Responsibilities M&E Labour Supply & Coordination Source, vet, and place qualified M&E operatives (e.g. electricians, mates, plumbers, pipefitters, HVAC engineers) Manage daily bookings, site allocations, and workforce planning specific to M&E projects Respond rapidly to urgent client requirements, shutdowns, and project demands Client Management (M&E Focus) Develop and maintain strong relationships with M&E contractors and building services clients Act as the primary contact for all M&E labour requirements Understand project scopes, timelines, and technical requirements to ensure accurate placements Compliance & Technical Vetting Verify qualifications and certifications (e.g. ECS/CSCS cards, JIB grading, NVQs, 18th Edition wiring regs) Ensure all operatives meet health & safety and site-specific compliance standards Maintain up-to-date records of certifications, right to work, and training Candidate Management Build and maintain a strong pipeline of M&E candidates across multiple disciplines Conduct interviews and competency checks relevant to M&E roles Monitor on-site performance and address any issues proactively Requirements Proven experience in recruitment or labour management within Mechanical & Electrical (M&E) or building services Strong understanding of M&E roles, qualifications, and site requirements Established network of M&E candidates or clients (desirable) Ability to work in a fast-paced, reactive environment Strong organisational and communication skills Knowledge of compliance requirements within the M&E sector
May 07, 2026
Full time
We Build Recruitment is looking for an experienced Labour Manager to lead and develop our Mechanical & Electrical (M&E) labour desk. This role focuses on supplying high-quality M&E operatives to construction and building services projects, ensuring clients receive skilled, compliant, and reliable personnel. You will play a key role in building a strong network of electricians, plumbers, HVAC engineers, and associated trades, while maintaining excellent service delivery to clients across commercial, residential, and industrial projects. Key Responsibilities M&E Labour Supply & Coordination Source, vet, and place qualified M&E operatives (e.g. electricians, mates, plumbers, pipefitters, HVAC engineers) Manage daily bookings, site allocations, and workforce planning specific to M&E projects Respond rapidly to urgent client requirements, shutdowns, and project demands Client Management (M&E Focus) Develop and maintain strong relationships with M&E contractors and building services clients Act as the primary contact for all M&E labour requirements Understand project scopes, timelines, and technical requirements to ensure accurate placements Compliance & Technical Vetting Verify qualifications and certifications (e.g. ECS/CSCS cards, JIB grading, NVQs, 18th Edition wiring regs) Ensure all operatives meet health & safety and site-specific compliance standards Maintain up-to-date records of certifications, right to work, and training Candidate Management Build and maintain a strong pipeline of M&E candidates across multiple disciplines Conduct interviews and competency checks relevant to M&E roles Monitor on-site performance and address any issues proactively Requirements Proven experience in recruitment or labour management within Mechanical & Electrical (M&E) or building services Strong understanding of M&E roles, qualifications, and site requirements Established network of M&E candidates or clients (desirable) Ability to work in a fast-paced, reactive environment Strong organisational and communication skills Knowledge of compliance requirements within the M&E sector
Location; UK field based - head office Walsall We are working with a specialist engineering business supplying industrial washing and hygiene systems into food manufacturing, pharmaceutical and industrial processing environments across the UK. The business designs, installs and maintains bespoke washing systems, supporting customers where uptime, reliability and service response are critical. Due to continued growth, the business is looking to recruit a Field Service Mechanical Engineer to join a small, experienced engineering team. This is a field-based role working on customer sites across the UK, supporting planned maintenance, breakdown response, installation work and ongoing equipment reliability. You will be working on industrial washers, conveyor systems, spray bars, air knives, bin lifts and utensil washing equipment. The role combines hands-on mechanical maintenance with customer-facing service work, offering good variety and strong long-term stability. This role would suit a mechanically biased Maintenance Engineer or Mechanical Fitter who enjoys field-based problem solving, travel, varied site work and working with specialist industrial equipment. Electrical experience is useful, but the business is happy to provide training where needed. Responsibilities of a field service mechanical engineer: Carry out planned maintenance, repairs and first-line fault finding on industrial washing systems Replace worn or damaged components to maintain safe and reliable equipment performance Work on industrial conveyor systems, spray bars, air knives, bin lifts and utensil washers Support installations, commissioning and planned service work on customer sites across the UK Carry out TIG welding where required as part of repair and modification work Work independently on service visits or as part of a team on larger installations Maintain high standards of health, safety and customer service while working on site Complete service reports and communicate clearly with customers and internal teams Skills & qualifications of a field service mechanical engineer: Strong mechanical maintenance background within industrial, manufacturing or service environments Mechanical or maintenance qualifications beneficial but not essential TIG welding experience essential Experience working on conveyors, production equipment or industrial plant desirable Electrical fault-finding experience advantageous but not essential Ability to work independently and manage field-based workloads Good communication skills and customer-facing attitude Full UK driving licence required Benefits of a field service mechanical engineer: Salary: £33,000 £37,000 (with review based on experience) Monday to Thursday: 07 00 Friday: 07 00 Overtime paid at 1.5x UK-wide field-based role with varied customer sites and equipment Stop-out allowance including hotel accommodation plus meal allowance / £20 per night Pension scheme Training and development in electrical systems and specialist machinery Long-term stable role within a growing specialist engineering business If you feel this Field Service Mechanical Engineer role is right for you, please contact Dan Fergus at Maintech Recruitment for more information or click apply. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed in line with our privacy policy, available on our website. Top of Form Bottom of Form
May 07, 2026
Full time
Location; UK field based - head office Walsall We are working with a specialist engineering business supplying industrial washing and hygiene systems into food manufacturing, pharmaceutical and industrial processing environments across the UK. The business designs, installs and maintains bespoke washing systems, supporting customers where uptime, reliability and service response are critical. Due to continued growth, the business is looking to recruit a Field Service Mechanical Engineer to join a small, experienced engineering team. This is a field-based role working on customer sites across the UK, supporting planned maintenance, breakdown response, installation work and ongoing equipment reliability. You will be working on industrial washers, conveyor systems, spray bars, air knives, bin lifts and utensil washing equipment. The role combines hands-on mechanical maintenance with customer-facing service work, offering good variety and strong long-term stability. This role would suit a mechanically biased Maintenance Engineer or Mechanical Fitter who enjoys field-based problem solving, travel, varied site work and working with specialist industrial equipment. Electrical experience is useful, but the business is happy to provide training where needed. Responsibilities of a field service mechanical engineer: Carry out planned maintenance, repairs and first-line fault finding on industrial washing systems Replace worn or damaged components to maintain safe and reliable equipment performance Work on industrial conveyor systems, spray bars, air knives, bin lifts and utensil washers Support installations, commissioning and planned service work on customer sites across the UK Carry out TIG welding where required as part of repair and modification work Work independently on service visits or as part of a team on larger installations Maintain high standards of health, safety and customer service while working on site Complete service reports and communicate clearly with customers and internal teams Skills & qualifications of a field service mechanical engineer: Strong mechanical maintenance background within industrial, manufacturing or service environments Mechanical or maintenance qualifications beneficial but not essential TIG welding experience essential Experience working on conveyors, production equipment or industrial plant desirable Electrical fault-finding experience advantageous but not essential Ability to work independently and manage field-based workloads Good communication skills and customer-facing attitude Full UK driving licence required Benefits of a field service mechanical engineer: Salary: £33,000 £37,000 (with review based on experience) Monday to Thursday: 07 00 Friday: 07 00 Overtime paid at 1.5x UK-wide field-based role with varied customer sites and equipment Stop-out allowance including hotel accommodation plus meal allowance / £20 per night Pension scheme Training and development in electrical systems and specialist machinery Long-term stable role within a growing specialist engineering business If you feel this Field Service Mechanical Engineer role is right for you, please contact Dan Fergus at Maintech Recruitment for more information or click apply. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed in line with our privacy policy, available on our website. Top of Form Bottom of Form
Job title: Electrical/HVAC FitterJob location: Crewe, CheshireHourly pay rate: £18.82 PAYE / £24.40 UmbrellaShifts: Mon -Thurs 8am - 4.30pm (with flexibility to work shifts) Friday Early finish 12.15pm Hours per week: 37Duration: OngoingStart date: ASAPIndustries considered: Rolling Stock, Automotive, Marine, Aviation, Military, HGV Technicians, Aerospace, HVAC Technicians, Vehicle Technicians, Electricians, Electrical Engineers, PlumbersCompany Summary:A global leader in Rolling Stock vehicle manufacturing, service and maintenance.Position Summary:Based within the Rolling Stock industry (Trains) we are currently recruiting for Electrical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Electrical Overhaul of Rail HVAC units Candidates will be required to carry out the following duties: HVAC overhaul, damage repair and engineering Read schematics and technical drawings Understanding of electrical components Carry out electrical builds Crimping Soldering Pipe Bending Brazing experience (Desirable not essential) F-Gas certification (Desirable not essential) Re-engineering and production of spare partsTo undertake all types of Electrical/Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train.Person Profile/Experience: You will be a highly self-motivated individual, able to work under your own initiative. You will possess excellent communication & interpersonal skills. You will need extensive all-round knowledge of Electrical and Mechanical Engineering You will ideally have knowledge of modern rolling stock systems, You will ideally have experience of HVAC systems You will ideally have experience of Train depot operations.Qualifications:Candidates would preferably be time served, and apprentice trained with the relevant mechanical papers. A minimum of a NVQ level 2 or equivalent in an Electrical/Mechanical discipline is a requirement. Contact Information:Email: Phone: PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject to change as agreed with our client.
May 07, 2026
Contractor
Job title: Electrical/HVAC FitterJob location: Crewe, CheshireHourly pay rate: £18.82 PAYE / £24.40 UmbrellaShifts: Mon -Thurs 8am - 4.30pm (with flexibility to work shifts) Friday Early finish 12.15pm Hours per week: 37Duration: OngoingStart date: ASAPIndustries considered: Rolling Stock, Automotive, Marine, Aviation, Military, HGV Technicians, Aerospace, HVAC Technicians, Vehicle Technicians, Electricians, Electrical Engineers, PlumbersCompany Summary:A global leader in Rolling Stock vehicle manufacturing, service and maintenance.Position Summary:Based within the Rolling Stock industry (Trains) we are currently recruiting for Electrical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Electrical Overhaul of Rail HVAC units Candidates will be required to carry out the following duties: HVAC overhaul, damage repair and engineering Read schematics and technical drawings Understanding of electrical components Carry out electrical builds Crimping Soldering Pipe Bending Brazing experience (Desirable not essential) F-Gas certification (Desirable not essential) Re-engineering and production of spare partsTo undertake all types of Electrical/Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train.Person Profile/Experience: You will be a highly self-motivated individual, able to work under your own initiative. You will possess excellent communication & interpersonal skills. You will need extensive all-round knowledge of Electrical and Mechanical Engineering You will ideally have knowledge of modern rolling stock systems, You will ideally have experience of HVAC systems You will ideally have experience of Train depot operations.Qualifications:Candidates would preferably be time served, and apprentice trained with the relevant mechanical papers. A minimum of a NVQ level 2 or equivalent in an Electrical/Mechanical discipline is a requirement. Contact Information:Email: Phone: PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject to change as agreed with our client.
Randstad Construction & Property
Leicester, Leicestershire
Shift Maintenance Team Leader Shift Pattern: Monday to Thursday 4 Days On (3 Off) 4 Nights On (3 Off) Salary: £62,000 OTE (Includes 6 hours built-in overtime per week) About the Role We are seeking a proactive Shift Maintenance Team Leader to coordinate a multi-skilled team responsible for urgent breakdown repairs across a heavy industrial plant. You will thrive under pressure, leading hands-on maintenance activities to ensure rapid, safe, and effective responses to both electrical and mechanical failures. This role is focused on minimizing production downtime through effective leadership and technical expertise. Key Responsibilities Lead & Supervise: Assign tasks to the reactive maintenance team based on urgency, risk, and technical skills. Rapid Response: Coordinate resources to manage plant breakdowns and minimize downtime. Technical Support: Provide guidance to electricians, fitters, and technicians on complex fault-finding. Safety & Compliance: Ensure strict adherence to LOTOTO, PPE, and safety protocols during all repairs. Reporting: Maintain accurate records of faults, parts used, and repair times within the CMMS. Continuous Improvement: Identify repeat faults and recommend long-term reliability improvements. What We're Looking For Proven experience as a maintenance fitter or electrician in an industrial environment. Strong leadership or supervisory experience with the ability to coordinate a team under pressure. Excellent mechanical and electrical fault-finding abilities. Experience with heavy plant equipment (mixers, conveyors, pumps, or material-handling systems). Solid understanding of Health & Safety principles (LOTO, isolations, and risk assessments). CMMS experience and good technical reporting skills. Benefits Competitive salary with built-in overtime. Generous pension scheme. 20 days annual leave. Life assurance and employee assistance programme. Enhanced parental leave and cycle to work scheme. Continuous professional development and upskilling opportunities. Free onsite parking. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 07, 2026
Full time
Shift Maintenance Team Leader Shift Pattern: Monday to Thursday 4 Days On (3 Off) 4 Nights On (3 Off) Salary: £62,000 OTE (Includes 6 hours built-in overtime per week) About the Role We are seeking a proactive Shift Maintenance Team Leader to coordinate a multi-skilled team responsible for urgent breakdown repairs across a heavy industrial plant. You will thrive under pressure, leading hands-on maintenance activities to ensure rapid, safe, and effective responses to both electrical and mechanical failures. This role is focused on minimizing production downtime through effective leadership and technical expertise. Key Responsibilities Lead & Supervise: Assign tasks to the reactive maintenance team based on urgency, risk, and technical skills. Rapid Response: Coordinate resources to manage plant breakdowns and minimize downtime. Technical Support: Provide guidance to electricians, fitters, and technicians on complex fault-finding. Safety & Compliance: Ensure strict adherence to LOTOTO, PPE, and safety protocols during all repairs. Reporting: Maintain accurate records of faults, parts used, and repair times within the CMMS. Continuous Improvement: Identify repeat faults and recommend long-term reliability improvements. What We're Looking For Proven experience as a maintenance fitter or electrician in an industrial environment. Strong leadership or supervisory experience with the ability to coordinate a team under pressure. Excellent mechanical and electrical fault-finding abilities. Experience with heavy plant equipment (mixers, conveyors, pumps, or material-handling systems). Solid understanding of Health & Safety principles (LOTO, isolations, and risk assessments). CMMS experience and good technical reporting skills. Benefits Competitive salary with built-in overtime. Generous pension scheme. 20 days annual leave. Life assurance and employee assistance programme. Enhanced parental leave and cycle to work scheme. Continuous professional development and upskilling opportunities. Free onsite parking. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER click apply for full job details
May 06, 2026
Contractor
PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER click apply for full job details
Fitter Location: Gravesend Shifts: Monday to Friday, 40 hours per week Pay Rate: 14.29 per hour As a Fitter, you will be responsible for refurbishing and modernising modular buildings, transforming used units into high-quality, ready-to-hire cabins. This is a hands-on role suited to someone with strong practical skills and a flexible approach to different tasks. Key Responsibilities Prepare surfaces for painting Carry out basic plumbing work Fit windows and doors Perform general maintenance and repairs Use hand and power tools safely Remove and replace flooring Install and remove wall and ceiling panels Ensure all work meets company quality standards and customer expectations Requirements Semi-skilled or multi-skilled background Experience in one or more of the following: Joinery Plumbing Electrical work Good general DIY skills Ability to adapt to a variety of tasks
May 06, 2026
Seasonal
Fitter Location: Gravesend Shifts: Monday to Friday, 40 hours per week Pay Rate: 14.29 per hour As a Fitter, you will be responsible for refurbishing and modernising modular buildings, transforming used units into high-quality, ready-to-hire cabins. This is a hands-on role suited to someone with strong practical skills and a flexible approach to different tasks. Key Responsibilities Prepare surfaces for painting Carry out basic plumbing work Fit windows and doors Perform general maintenance and repairs Use hand and power tools safely Remove and replace flooring Install and remove wall and ceiling panels Ensure all work meets company quality standards and customer expectations Requirements Semi-skilled or multi-skilled background Experience in one or more of the following: Joinery Plumbing Electrical work Good general DIY skills Ability to adapt to a variety of tasks
We are seeking qualified Electrical Fitters / Marine Electricans to carry out various maintenance work on Royal Naval vessels. WORKING HOURS Day's Mon - Thurs (Apply online only) Fri (Apply online only) OUTLINE OF DUTIES Ensure safe systems of work are carried out at all times. Read/Interpret Electrical Drawings, MDS and Guidance information. Undertake new system fits across all classes of RN vessels. Install various types of Electrical Equipment associated with an RN vessel such as motors, starters, control panels, Radar and associated equipment, weapons systems, internal and external comms. Fault diagnosis and defect rectification. Carry out Electrical Testing. Execute various crimping techniques. ERMA, Gold pin. Soldering Terminate multiple types of Cable. Install Cable Support Systems. Cable Tray/Basket/Conduit/Hangers Install/Reeve cables Pack various types of glands / transits. Roxtec, RISE, Brattberg. Terminate multi pin plugs such as 608 and Amphinol. Remove and install basic mechanical and constructive items as required. General information Based in HM Naval base Portsmouth in support of Royal Navy, RFA and commercial vessels employed as an industrial electrical fitter. Personnel must have a deep understanding of electrical work and be able to carry out the various techniques used in ship repair and support industry. Suitable candidates will have a good understanding of safe systems of work including electrical work, confined spaces, working at height and RN specific safety operations. In addition a basic knowledge of mechanical systems and associated equipment is required candidates must be flexible to undertake tasks across any trade discipline as required. Must be prepared to work in a team to provide a high quality service to meet customer expectations. Qualification requirements Must have completed recognised electrical apprenticeship. Hold a minimum a level 3 qualification (NVQ/City & Guilds) in an electrical discipline
May 06, 2026
Contractor
We are seeking qualified Electrical Fitters / Marine Electricans to carry out various maintenance work on Royal Naval vessels. WORKING HOURS Day's Mon - Thurs (Apply online only) Fri (Apply online only) OUTLINE OF DUTIES Ensure safe systems of work are carried out at all times. Read/Interpret Electrical Drawings, MDS and Guidance information. Undertake new system fits across all classes of RN vessels. Install various types of Electrical Equipment associated with an RN vessel such as motors, starters, control panels, Radar and associated equipment, weapons systems, internal and external comms. Fault diagnosis and defect rectification. Carry out Electrical Testing. Execute various crimping techniques. ERMA, Gold pin. Soldering Terminate multiple types of Cable. Install Cable Support Systems. Cable Tray/Basket/Conduit/Hangers Install/Reeve cables Pack various types of glands / transits. Roxtec, RISE, Brattberg. Terminate multi pin plugs such as 608 and Amphinol. Remove and install basic mechanical and constructive items as required. General information Based in HM Naval base Portsmouth in support of Royal Navy, RFA and commercial vessels employed as an industrial electrical fitter. Personnel must have a deep understanding of electrical work and be able to carry out the various techniques used in ship repair and support industry. Suitable candidates will have a good understanding of safe systems of work including electrical work, confined spaces, working at height and RN specific safety operations. In addition a basic knowledge of mechanical systems and associated equipment is required candidates must be flexible to undertake tasks across any trade discipline as required. Must be prepared to work in a team to provide a high quality service to meet customer expectations. Qualification requirements Must have completed recognised electrical apprenticeship. Hold a minimum a level 3 qualification (NVQ/City & Guilds) in an electrical discipline
Mobile Fleet Technician - Kent Day shifts Up to £42,500- Paid door to door Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections You will be travelling within a designated area and have use of a fully equipped van. We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker Abiding by health and safety rules A problem solver with a can-do mindset In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Gritters, Refuse Collection Vehicles, Tankers, Sweepers, Flat Beds and Cherry Pickers. Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. AClass2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
May 06, 2026
Full time
Mobile Fleet Technician - Kent Day shifts Up to £42,500- Paid door to door Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections You will be travelling within a designated area and have use of a fully equipped van. We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker Abiding by health and safety rules A problem solver with a can-do mindset In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Gritters, Refuse Collection Vehicles, Tankers, Sweepers, Flat Beds and Cherry Pickers. Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. AClass2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Our client is a successful and well-established manufacturer. They are looking for an experienced Auto Electrician to work on the electrical aspects of vehicle manufacture / conversion. They are looking for people that are used to working with hand and power tools, and that can follow diagrams, schematics and instructions with precision. PLEASE ONLY APPLY IF YOU ARE AN EXPERIENCED / SENIOR AUTO ELECTRICIAN Responsibilities: Research electrical faults. Repair and replace electrical items. Understand and be able to fit; Tail Lifts, Towbars, Beacons, and any extra lights inside and out on panel vans or chassis. Installation and fitting of electrical systems, including; alarms, immobilisers, tracking, parking sensors, split charge systems, welfare heating, water, and power systems. General upkeep of the workshop and premises to aid with the smooth running of the workshop and conversion of vehicles. Installations should be to a high standard. This role covers all duties in the workshop electrical department, and can involve mentoring. Requirements: Good working knowledge of vehicle Electrics and a proven background as an Auto Electrician is essential. Have the basic tooling and be able to use hand and power tools. Work methodically and pay close attention to detail. Ability to read electrical diagrams. Flexible as work can be varied. Have own tools and also be able to look after and care for any company tooling and equipment used. Be competent at working alone or as part of a team. Salary: £30,000 - £33,000 depending on experience. Hours of work: 4 day week! Monday to Thursday, 6:30am to 5:00pm, 40 hour week. Benefits: Free parking Gym membership Health & wellbeing programme On-site parking This job would suit someone with a background in Automotive Electrics, e.g. Automotive Electrician / Electrical Assembler / Coach Builder / Automotive Electrician / Vehicle Conversion Operative / Electrical Engineer / Electrical Technician / Electrical Assembly Operative / Electrical Fitter / Electrical Engineer / etc.
May 06, 2026
Full time
Our client is a successful and well-established manufacturer. They are looking for an experienced Auto Electrician to work on the electrical aspects of vehicle manufacture / conversion. They are looking for people that are used to working with hand and power tools, and that can follow diagrams, schematics and instructions with precision. PLEASE ONLY APPLY IF YOU ARE AN EXPERIENCED / SENIOR AUTO ELECTRICIAN Responsibilities: Research electrical faults. Repair and replace electrical items. Understand and be able to fit; Tail Lifts, Towbars, Beacons, and any extra lights inside and out on panel vans or chassis. Installation and fitting of electrical systems, including; alarms, immobilisers, tracking, parking sensors, split charge systems, welfare heating, water, and power systems. General upkeep of the workshop and premises to aid with the smooth running of the workshop and conversion of vehicles. Installations should be to a high standard. This role covers all duties in the workshop electrical department, and can involve mentoring. Requirements: Good working knowledge of vehicle Electrics and a proven background as an Auto Electrician is essential. Have the basic tooling and be able to use hand and power tools. Work methodically and pay close attention to detail. Ability to read electrical diagrams. Flexible as work can be varied. Have own tools and also be able to look after and care for any company tooling and equipment used. Be competent at working alone or as part of a team. Salary: £30,000 - £33,000 depending on experience. Hours of work: 4 day week! Monday to Thursday, 6:30am to 5:00pm, 40 hour week. Benefits: Free parking Gym membership Health & wellbeing programme On-site parking This job would suit someone with a background in Automotive Electrics, e.g. Automotive Electrician / Electrical Assembler / Coach Builder / Automotive Electrician / Vehicle Conversion Operative / Electrical Engineer / Electrical Technician / Electrical Assembly Operative / Electrical Fitter / Electrical Engineer / etc.
MET Technician / Strip Fitter Eastleigh Up to 47,000 OTE 65,000 + Time Saved Bonus - banked weekly & paid monthly Monday to Friday only Access 30% of your wages in advance every month 29 days annual leave (increasing with service) Clear progression opportunities within an expanding company Enhanced sick pay Plus, many more great benefits For more information, please call Rochelle on: (phone number removed) MET Technician / Strip & Fit - Accident Repair Specialist If you're an experienced MET Technician and confident Strip & Fitter from an accident repair background, this is a brilliant opportunity to join a forward-thinking, quality-focused repair centre - one that values precision over speed and takes pride in doing things properly. You'll be working with a respected name in the industry, in a workshop that's fully equipped, well-organised, and focused on high-standard repairs - not rushed jobs. If you take real pride in your workmanship, you'll fit in perfectly. What You'll Be Doing: MET Technician Removing and refitting mechanical and electrical trims, panels, and components Professionally stripping and rebuilding vehicles, ensuring work is completed to manufacturer standards Dismantling accident-damaged vehicles ahead of panel and paint stages Performing fault finding, diagnostics, and inspections Steering, suspension, and wheel alignment work as required Ordering and fitting replacement parts Carefully reassembling vehicles to pre-accident condition Working on bodywork, trim, and all mechanical/electrical aspects within your remit Following manufacturer repair methods and ensuring all work meets quality and safety standards Managing repair times effectively and ensuring work is completed within agreed timelines What You'll Need: Previous experience as a MET Technician in a bodyshop or accident repair setting Strong mechanical, electrical, and diagnostic skills Ability to follow technical repair methods accurately An ATA, NVQ Level 3, or IMI Level 3 qualification would be a big advantage A proactive mindset and pride in delivering high-quality work If you're looking to join a company that truly respects the skill behind accident repair and provides the right environment to do your best work, we'd love to hear from you If you would like to be considered for the MET Technician job, please call Rochelle at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more IND123
May 06, 2026
Full time
MET Technician / Strip Fitter Eastleigh Up to 47,000 OTE 65,000 + Time Saved Bonus - banked weekly & paid monthly Monday to Friday only Access 30% of your wages in advance every month 29 days annual leave (increasing with service) Clear progression opportunities within an expanding company Enhanced sick pay Plus, many more great benefits For more information, please call Rochelle on: (phone number removed) MET Technician / Strip & Fit - Accident Repair Specialist If you're an experienced MET Technician and confident Strip & Fitter from an accident repair background, this is a brilliant opportunity to join a forward-thinking, quality-focused repair centre - one that values precision over speed and takes pride in doing things properly. You'll be working with a respected name in the industry, in a workshop that's fully equipped, well-organised, and focused on high-standard repairs - not rushed jobs. If you take real pride in your workmanship, you'll fit in perfectly. What You'll Be Doing: MET Technician Removing and refitting mechanical and electrical trims, panels, and components Professionally stripping and rebuilding vehicles, ensuring work is completed to manufacturer standards Dismantling accident-damaged vehicles ahead of panel and paint stages Performing fault finding, diagnostics, and inspections Steering, suspension, and wheel alignment work as required Ordering and fitting replacement parts Carefully reassembling vehicles to pre-accident condition Working on bodywork, trim, and all mechanical/electrical aspects within your remit Following manufacturer repair methods and ensuring all work meets quality and safety standards Managing repair times effectively and ensuring work is completed within agreed timelines What You'll Need: Previous experience as a MET Technician in a bodyshop or accident repair setting Strong mechanical, electrical, and diagnostic skills Ability to follow technical repair methods accurately An ATA, NVQ Level 3, or IMI Level 3 qualification would be a big advantage A proactive mindset and pride in delivering high-quality work If you're looking to join a company that truly respects the skill behind accident repair and provides the right environment to do your best work, we'd love to hear from you If you would like to be considered for the MET Technician job, please call Rochelle at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more IND123
Ernest Gordon Recruitment Limited
Middlesbrough, Yorkshire
Plant Fitter (Switchgear/Transformers) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers and actuators. This Role would suit a Plant Fitter with a background in Switchgear or Transformers or high voltage or similar. You will also require a full UK Driving License. The Role: Maintenance and Repair of HV Switchgear and automation Equipment Installation of transformers, Actuators and RTUs Field Service The Person: Plant Fitter Industrial Engineer UK Driving License REF: BBBH24273JHD If you're interested in this role, click 'apply now ' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 06, 2026
Full time
Plant Fitter (Switchgear/Transformers) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers and actuators. This Role would suit a Plant Fitter with a background in Switchgear or Transformers or high voltage or similar. You will also require a full UK Driving License. The Role: Maintenance and Repair of HV Switchgear and automation Equipment Installation of transformers, Actuators and RTUs Field Service The Person: Plant Fitter Industrial Engineer UK Driving License REF: BBBH24273JHD If you're interested in this role, click 'apply now ' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Ernest Gordon Recruitment Limited
Skelmersdale, Lancashire
Plant Mechanic (Construction / Piling) £45,000 - £k OTE) + Training on Specialist Equipment + 1.5x Overtime + Van and Fuel Card + Private Pension + Holiday Purchase Scheme + Door 2 Door + Healthcare + Progression Skelmersdale, Lancashire Are you a Plant Mechanic or similar with experience working with heavy plant like excavators, cranes or Casagrande, Bauer, Liebherr, Soilmec equipment or similar and looking for a new Monday to Friday role that offers a vehicle and is paid door to door? This company, established in the 1960's and has cemented themselves within the construction/plant industry and boasts a multimillion-pound turnover. With numerous offices, they have a global impact within the Plant and Construction industries. They have recently taken on some large projects, and as a result are looking for a Plant Engineer to join their team in Burscough. In this varied role you will be split between the workshop and the field, working on a variety of heavy construction plant equipment such as Soilmec, CAT, Casagrande, Bauer and Liebherr. You will be involved in fault finding on Mechanical and Electrical equipment, as well as rigging, carrying out inspections and preventative maintenance. This role would suit a Plant Mechanic or similar, with experience working on heavy plant equipment, looking for a technical role within a global organisation, offering ongoing progression and career development. The Role Working on heavy machinery and plant equipment Split 80-20 between site and workshop Fault finding and maintenance Monday to Thursday (7:30am - 5pm) / Friday (7:30am - 1pm) The Person Plant Mechanic or similar UK driver's license Reference Number: BBBH24726a Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 06, 2026
Full time
Plant Mechanic (Construction / Piling) £45,000 - £k OTE) + Training on Specialist Equipment + 1.5x Overtime + Van and Fuel Card + Private Pension + Holiday Purchase Scheme + Door 2 Door + Healthcare + Progression Skelmersdale, Lancashire Are you a Plant Mechanic or similar with experience working with heavy plant like excavators, cranes or Casagrande, Bauer, Liebherr, Soilmec equipment or similar and looking for a new Monday to Friday role that offers a vehicle and is paid door to door? This company, established in the 1960's and has cemented themselves within the construction/plant industry and boasts a multimillion-pound turnover. With numerous offices, they have a global impact within the Plant and Construction industries. They have recently taken on some large projects, and as a result are looking for a Plant Engineer to join their team in Burscough. In this varied role you will be split between the workshop and the field, working on a variety of heavy construction plant equipment such as Soilmec, CAT, Casagrande, Bauer and Liebherr. You will be involved in fault finding on Mechanical and Electrical equipment, as well as rigging, carrying out inspections and preventative maintenance. This role would suit a Plant Mechanic or similar, with experience working on heavy plant equipment, looking for a technical role within a global organisation, offering ongoing progression and career development. The Role Working on heavy machinery and plant equipment Split 80-20 between site and workshop Fault finding and maintenance Monday to Thursday (7:30am - 5pm) / Friday (7:30am - 1pm) The Person Plant Mechanic or similar UK driver's license Reference Number: BBBH24726a Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
MET Technician Location: Lincoln Annual Salary: Up to £65,000 per year Hours: Monday to Friday 42.5h week Benefits: Excellent Time Saved Bonus Scheme with uncapped earning potential, 30 Days holiday and more. Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Strip Fitter / MET Technician: Recognised apprenticeship as a MET Strip Fitter / MET Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDHW
May 05, 2026
Full time
MET Technician Location: Lincoln Annual Salary: Up to £65,000 per year Hours: Monday to Friday 42.5h week Benefits: Excellent Time Saved Bonus Scheme with uncapped earning potential, 30 Days holiday and more. Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Strip Fitter / MET Technician: Recognised apprenticeship as a MET Strip Fitter / MET Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDHW
MET Technician Location: East Birmingham Annual Salary: up to £60,000 Hours: Mon-Fri, 42.5h week Extras: 30 Days holiday, Achievable Individual Time Saved Bonuses and many more Our client is looking for a talented and efficient MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Recognised apprenticeship as a MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDHW
May 05, 2026
Full time
MET Technician Location: East Birmingham Annual Salary: up to £60,000 Hours: Mon-Fri, 42.5h week Extras: 30 Days holiday, Achievable Individual Time Saved Bonuses and many more Our client is looking for a talented and efficient MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Recognised apprenticeship as a MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDHW
Jonathan Lee Recruitment Ltd
Nailsworth, Gloucestershire
We are seeking a skilled Mechanical Fitter to join our clients team. In this role, you will be responsible for producing high-quality products to the required standards, as defined by drawings, written instructions, and guidance from the supervisor. Key Responsibilities: - Complete engineering duties for sub-assembly production, fitting, and final assembly - Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies as required - Assist with the production and build of fabricated assemblies of varying size and complexity, using general skills such as marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, and pneumatic runs - Comply with the company's health and safety policies and procedures, ensuring your own safety and that of others - Perform any other duties as reasonably expected by the company Required Skills and Qualifications: - Solid engineering background with experience working from manufacturing drawings, general arrangement drawings, and sub-assembly drawings - Proficiency in using a variety of hand and power tools to assemble a wide range of large and small fabricated components - Ability to check the complete assembly for alignment, dimensions, and quality - Experience in vehicle fabricating/fitting is an advantage - Strong problem-solving skills and a logical mindset - Knowledge of pneumatics, hydraulics, and electrical circuitry - Background in aviation, military, marine, or a similar industry is desirable - Basic electrical assembly skills and the ability to read electrical circuit drawings are preferred but not essential This role is working Days, Monday-Friday and offers a competitive salary with bonus incentives. If you are an experienced Mechanical Fitter with a passion for delivering high-quality work, we encourage you to apply for this exciting role. Should this role be of interest, please submit your CV to Barry Salters, Email - (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
May 05, 2026
Full time
We are seeking a skilled Mechanical Fitter to join our clients team. In this role, you will be responsible for producing high-quality products to the required standards, as defined by drawings, written instructions, and guidance from the supervisor. Key Responsibilities: - Complete engineering duties for sub-assembly production, fitting, and final assembly - Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies as required - Assist with the production and build of fabricated assemblies of varying size and complexity, using general skills such as marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, and pneumatic runs - Comply with the company's health and safety policies and procedures, ensuring your own safety and that of others - Perform any other duties as reasonably expected by the company Required Skills and Qualifications: - Solid engineering background with experience working from manufacturing drawings, general arrangement drawings, and sub-assembly drawings - Proficiency in using a variety of hand and power tools to assemble a wide range of large and small fabricated components - Ability to check the complete assembly for alignment, dimensions, and quality - Experience in vehicle fabricating/fitting is an advantage - Strong problem-solving skills and a logical mindset - Knowledge of pneumatics, hydraulics, and electrical circuitry - Background in aviation, military, marine, or a similar industry is desirable - Basic electrical assembly skills and the ability to read electrical circuit drawings are preferred but not essential This role is working Days, Monday-Friday and offers a competitive salary with bonus incentives. If you are an experienced Mechanical Fitter with a passion for delivering high-quality work, we encourage you to apply for this exciting role. Should this role be of interest, please submit your CV to Barry Salters, Email - (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
We are looking for an Electrical Fitter to work permanently for our client who are based in East Cheshire. The role offers a competitive salary, plus a comprehensive benefits package including pension scheme, health and wellbeing support, recognition and reward programmes, employee referral incentive, and opportunities for ongoing training and development click apply for full job details
May 05, 2026
Full time
We are looking for an Electrical Fitter to work permanently for our client who are based in East Cheshire. The role offers a competitive salary, plus a comprehensive benefits package including pension scheme, health and wellbeing support, recognition and reward programmes, employee referral incentive, and opportunities for ongoing training and development click apply for full job details
15.00- 17.00p/h, No Weekends, Overtime at 150%, Half Day Friday, Career Progression, Perm Role, 33 days holiday About the Auto Electrician role: We are looking for a skilled Auto Electrician to join a company in Wolverhampton that specialise in manufacturing waste handling equipment/vehicles. As the auto electrician, you'll work on a wide range of bespoke builds - this is not repetitive production work. In this role, you will be responsible for installing, maintaining, and repairing electrical systems in specialist vehicles, ensuring all work meets the highest safety and quality standards. Key Responsibilities of the Auto Electrician: Diagnose and repair electrical faults Install new electrical systems and components. Conduct routine maintenance and inspections of vehicle electrical systems. Maintain accurate records of work completed and parts used. Ensure compliance with health and safety standards at all times. Requirements of the Auto Electrician: Proven experience as a Vehicle Electrical Fitter or similar role. Strong knowledge of vehicle electrical systems. Ability to work independently and as part of a team. Good problem-solving skills and attention to detail. Benefits of the Auto Electrician Role: Competitive hourly rate ( 15.00- 17.00). Monday-Friday only with early finish on Friday (12:30). Overtime available at x1.5 Permanent, secure position Ongoing training and development Supportive and professional working environment. If you are interested din this Auto Electrician role, please contact Grace at E3 Recruitment
May 04, 2026
Full time
15.00- 17.00p/h, No Weekends, Overtime at 150%, Half Day Friday, Career Progression, Perm Role, 33 days holiday About the Auto Electrician role: We are looking for a skilled Auto Electrician to join a company in Wolverhampton that specialise in manufacturing waste handling equipment/vehicles. As the auto electrician, you'll work on a wide range of bespoke builds - this is not repetitive production work. In this role, you will be responsible for installing, maintaining, and repairing electrical systems in specialist vehicles, ensuring all work meets the highest safety and quality standards. Key Responsibilities of the Auto Electrician: Diagnose and repair electrical faults Install new electrical systems and components. Conduct routine maintenance and inspections of vehicle electrical systems. Maintain accurate records of work completed and parts used. Ensure compliance with health and safety standards at all times. Requirements of the Auto Electrician: Proven experience as a Vehicle Electrical Fitter or similar role. Strong knowledge of vehicle electrical systems. Ability to work independently and as part of a team. Good problem-solving skills and attention to detail. Benefits of the Auto Electrician Role: Competitive hourly rate ( 15.00- 17.00). Monday-Friday only with early finish on Friday (12:30). Overtime available at x1.5 Permanent, secure position Ongoing training and development Supportive and professional working environment. If you are interested din this Auto Electrician role, please contact Grace at E3 Recruitment
We are currently recruiting for an experienced Hydraulics Fitter to join a well-established and growing engineering business. This is an excellent opportunity for a hands-on individual with a solid background in hydraulic systems to work on a variety of equipment in a fast-paced environment. Key Responsibilities Assemble, install, and maintain hydraulic systems and components Diagnose faults and carry out repairs on hydraulic equipment Read and interpret hydraulic schematics and technical drawings Conduct pressure testing and system checks to ensure performance and safety Replace hoses, seals, valves, pumps, and cylinders as required Carry out preventative maintenance to minimise downtime Work both in the workshop and occasionally on-site (if required) Ensure all work is completed in line with health & safety regulations Requirements Proven experience working as a Hydraulics Fitter or similar role Strong knowledge of hydraulic systems, components, and troubleshooting Ability to read and interpret engineering drawings and schematics Experience with fault finding and diagnostics Good mechanical aptitude and hands-on skills Full UK driving licence (preferred/required depending on role) Relevant engineering qualification (advantageous but not essential) Experience with mobile plant, heavy machinery, or industrial equipment Welding or fabrication experience Knowledge of pneumatics or electrical systems
May 04, 2026
Full time
We are currently recruiting for an experienced Hydraulics Fitter to join a well-established and growing engineering business. This is an excellent opportunity for a hands-on individual with a solid background in hydraulic systems to work on a variety of equipment in a fast-paced environment. Key Responsibilities Assemble, install, and maintain hydraulic systems and components Diagnose faults and carry out repairs on hydraulic equipment Read and interpret hydraulic schematics and technical drawings Conduct pressure testing and system checks to ensure performance and safety Replace hoses, seals, valves, pumps, and cylinders as required Carry out preventative maintenance to minimise downtime Work both in the workshop and occasionally on-site (if required) Ensure all work is completed in line with health & safety regulations Requirements Proven experience working as a Hydraulics Fitter or similar role Strong knowledge of hydraulic systems, components, and troubleshooting Ability to read and interpret engineering drawings and schematics Experience with fault finding and diagnostics Good mechanical aptitude and hands-on skills Full UK driving licence (preferred/required depending on role) Relevant engineering qualification (advantageous but not essential) Experience with mobile plant, heavy machinery, or industrial equipment Welding or fabrication experience Knowledge of pneumatics or electrical systems
About the role - Assembly Fitter First Achieve's Engineering Division are seeking an Assembly Fitter for a global leader in today's top performing industrial pumps and motors sector. As an Assembly Fitter, you will ensure the units are assembled to specifications on time and in full and at the required quality standards, whilst being in full compliance with all health and safety and quality requirements. What you will do: Read detailed engineering drawings. Understand quality plans and procedures. Assemble/disassemble & Rig/de-rig all units. Paint and preparing units for despatch. Demonstrate competent use of measuring equipment. Produce dimensional reports and strip inspections reports. Conduct pressure testing on components and units whilst ensuring that the relevant documents are completed. Demonstrate ability to safely use air powered and electrical tools. Book onto and close operations on completion using the ERP system. Work within team and all cross functional teams to ensure contractual obligations are achieved Right First Time (RFT) and On Time in Full (OTIF). Ensure that regular 5S duties are carried out to sustain a clean environment. Adhere to all health and safety aspects related to Assembly and ensure that a zero-accident environment is maintained. Maintain high standards at all times, report problems or deviations associated with H&S to the responsible Manager/Supervisor. Ensure that Health & Safety, Quality and Environment assurance, control and regulatory compliance are demonstrated, by working in accordance with the documented Health, Safety and Environmental procedures and instructions. What you will need: 4 years' experience working in a manufacturing environment utilising fitting skill. Recognised qualification in a mechanical discipline. Effective communication and problem-solving skills. Time served craft apprenticeship and experience with rotating assemblies are desirable. All candidates must be able to prove that they have the right to work in the UK. Why work for us? Competitive compensation and benefits packages. Excellent training and development opportunities. Generous annual leave and option to purchase additional holidays. Contributory pension plan with associated life assurance. Recognition reward schemes. Healthcare scheme offering cash back on medical services (optician/dental etc.). Virtual GP surgery and employee assistance programme. Cycle-to-work scheme. Range of employee discounts (including gyms, high street and online retailers).
May 04, 2026
Full time
About the role - Assembly Fitter First Achieve's Engineering Division are seeking an Assembly Fitter for a global leader in today's top performing industrial pumps and motors sector. As an Assembly Fitter, you will ensure the units are assembled to specifications on time and in full and at the required quality standards, whilst being in full compliance with all health and safety and quality requirements. What you will do: Read detailed engineering drawings. Understand quality plans and procedures. Assemble/disassemble & Rig/de-rig all units. Paint and preparing units for despatch. Demonstrate competent use of measuring equipment. Produce dimensional reports and strip inspections reports. Conduct pressure testing on components and units whilst ensuring that the relevant documents are completed. Demonstrate ability to safely use air powered and electrical tools. Book onto and close operations on completion using the ERP system. Work within team and all cross functional teams to ensure contractual obligations are achieved Right First Time (RFT) and On Time in Full (OTIF). Ensure that regular 5S duties are carried out to sustain a clean environment. Adhere to all health and safety aspects related to Assembly and ensure that a zero-accident environment is maintained. Maintain high standards at all times, report problems or deviations associated with H&S to the responsible Manager/Supervisor. Ensure that Health & Safety, Quality and Environment assurance, control and regulatory compliance are demonstrated, by working in accordance with the documented Health, Safety and Environmental procedures and instructions. What you will need: 4 years' experience working in a manufacturing environment utilising fitting skill. Recognised qualification in a mechanical discipline. Effective communication and problem-solving skills. Time served craft apprenticeship and experience with rotating assemblies are desirable. All candidates must be able to prove that they have the right to work in the UK. Why work for us? Competitive compensation and benefits packages. Excellent training and development opportunities. Generous annual leave and option to purchase additional holidays. Contributory pension plan with associated life assurance. Recognition reward schemes. Healthcare scheme offering cash back on medical services (optician/dental etc.). Virtual GP surgery and employee assistance programme. Cycle-to-work scheme. Range of employee discounts (including gyms, high street and online retailers).
