Role Purpose The M&E Asset Surveyor is responsible for surveying, identifying, recording, and assessing mechanical and electrical building assets across a property portfolio. The role supports asset management strategies, lifecycle planning, maintenance planning, and compliance reporting. Key Responsibilities Asset Surveys Conduct mechanical and electrical asset surveys across commercial, residential, healthcare, education, or public sector buildings Identify and record plant and equipment including: HVAC systems Boilers Chillers Pumps Air handling units Electrical distribution boards Lighting systems Fire alarm systems BMS controls Capture asset condition, age, manufacturer, model, and maintenance requirements. Data Collection & Asset Registers Populate and maintain asset registers within CAFM or asset management systems. Ensure accurate tagging, labelling, and classification of assets. Upload survey data, photos, and documentation. Condition & Lifecycle Assessment Assess asset condition ratings. Provide remaining useful life estimates. Support lifecycle replacement planning. Identify maintenance or replacement priorities. Compliance & Risk Support compliance audits relating to: Electrical safety Fire systems HVAC maintenance Water hygiene systems Identify health & safety risks associated with plant and equipment. Reporting Produce survey reports and asset condition summaries. Provide recommendations for: Planned preventative maintenance (PPM) Capital replacement programmes Asset upgrades Stakeholder Collaboration Work with: Facilities Managers Building Surveyors Maintenance Contractors Asset Management Teams Support projects relating to asset improvement or replacement programmes. Key Skills & Competencies Strong understanding of building mechanical and electrical systems Experience conducting building or asset condition surveys Ability to interpret technical drawings and plant specifications Familiarity with CAFM / asset management systems Strong attention to detail and data accuracy Good report writing skills Knowledge of health and safety regulations
May 09, 2026
Contractor
Role Purpose The M&E Asset Surveyor is responsible for surveying, identifying, recording, and assessing mechanical and electrical building assets across a property portfolio. The role supports asset management strategies, lifecycle planning, maintenance planning, and compliance reporting. Key Responsibilities Asset Surveys Conduct mechanical and electrical asset surveys across commercial, residential, healthcare, education, or public sector buildings Identify and record plant and equipment including: HVAC systems Boilers Chillers Pumps Air handling units Electrical distribution boards Lighting systems Fire alarm systems BMS controls Capture asset condition, age, manufacturer, model, and maintenance requirements. Data Collection & Asset Registers Populate and maintain asset registers within CAFM or asset management systems. Ensure accurate tagging, labelling, and classification of assets. Upload survey data, photos, and documentation. Condition & Lifecycle Assessment Assess asset condition ratings. Provide remaining useful life estimates. Support lifecycle replacement planning. Identify maintenance or replacement priorities. Compliance & Risk Support compliance audits relating to: Electrical safety Fire systems HVAC maintenance Water hygiene systems Identify health & safety risks associated with plant and equipment. Reporting Produce survey reports and asset condition summaries. Provide recommendations for: Planned preventative maintenance (PPM) Capital replacement programmes Asset upgrades Stakeholder Collaboration Work with: Facilities Managers Building Surveyors Maintenance Contractors Asset Management Teams Support projects relating to asset improvement or replacement programmes. Key Skills & Competencies Strong understanding of building mechanical and electrical systems Experience conducting building or asset condition surveys Ability to interpret technical drawings and plant specifications Familiarity with CAFM / asset management systems Strong attention to detail and data accuracy Good report writing skills Knowledge of health and safety regulations
Coyle Personnel, is currently seeking a Foot Mobile engineer to work for a Building Maintenance Service Provider based in Central London. This is an exciting opportunity to work within an established team, providing maintenance services across various commercial sites in the Central London. Role Summary: As a Foot Mobile Engineer / Semi Static Engineer (working between 4 and 8 sites per week) you will be responsible for performing PPM and reactive maintenance within both land lord and tenant areas, maintaining site compliance records, overseeing subcontractors, ensuring work is completed to required standards, and completing first-fix repairs. Main Responsibilities Completing PPM and reactive maintenance tasks within commercial buildings. Participate in the on-call system as required. PPM maintenance (SFG 20). Carry out daily inspections. Carry out reactive repairs Provide assistance to the contract Supervisor / contract manager Oversee the Monitoring of the building M/E facilities Carrying out Planned Preventative Maintenance. Other engineering and facilities tasks as requested by the customer through the helpdesk Basic fabric tasks. Required Qualifications and Experience 5 Years experience in a similar field. Extensive knowledge of the techniques of Building Services, Repairs and Maintenance. Communication and IT skills. Recognised City and Guilds Electrical or mechanical qualifications. This role is temporary to permanent for the right person For more details or to apply, please call Liam Hargate from Coyles
May 09, 2026
Full time
Coyle Personnel, is currently seeking a Foot Mobile engineer to work for a Building Maintenance Service Provider based in Central London. This is an exciting opportunity to work within an established team, providing maintenance services across various commercial sites in the Central London. Role Summary: As a Foot Mobile Engineer / Semi Static Engineer (working between 4 and 8 sites per week) you will be responsible for performing PPM and reactive maintenance within both land lord and tenant areas, maintaining site compliance records, overseeing subcontractors, ensuring work is completed to required standards, and completing first-fix repairs. Main Responsibilities Completing PPM and reactive maintenance tasks within commercial buildings. Participate in the on-call system as required. PPM maintenance (SFG 20). Carry out daily inspections. Carry out reactive repairs Provide assistance to the contract Supervisor / contract manager Oversee the Monitoring of the building M/E facilities Carrying out Planned Preventative Maintenance. Other engineering and facilities tasks as requested by the customer through the helpdesk Basic fabric tasks. Required Qualifications and Experience 5 Years experience in a similar field. Extensive knowledge of the techniques of Building Services, Repairs and Maintenance. Communication and IT skills. Recognised City and Guilds Electrical or mechanical qualifications. This role is temporary to permanent for the right person For more details or to apply, please call Liam Hargate from Coyles
We are currently seeking a Small Works Project Manager to work with our NHS Clients on facilities management projects in the South East (Kent and Essex). The position will be responsible for managing and successfully delivering all financial and contractual aspects of minor works/small works projects including client variations, small projects and lifecycle works to ensure they are delivered to a high standard on time and within budget. Rydon Maintenance successfully provides hard facilities management services (Hard FM) across England for a growing number of NHS Trusts. We look after more than 250 buildings on behalf of 20 NHS Trusts on a planned, responsive repairs and small works projects basis. We provide maintenance services to hospitals, ambulance trusts, primary care trusts as well as mental health trusts. Our small works team support the NHS with delivering a range of projects from minor adaptations, refurbishments through to repurposing of Trust space. Job Purpose An Small Works Projects Manager you will be responsible for leading a variety of negotiated works including refurbishments, maintenance, and small and minor works on the building fabric or re-modelling across our NHS contracts. This could include minor refurbishments, re-decoration, power installs, flooring refurbishments, LED lighting upgrades, roofing works, boiler updates. You will generally be managing a number of different projects at a time with works up to around 100k in value in total. Key responsibilities will include; Understanding the client's requirement and undertake a full quotation for proposed works. Carry out site walks to advise client on potential works needed, e.g. updating existing plant and general maintenance. Attend client meetings to discuss extra works and to provide updates on current works. Hold regular project meetings with suppliers/ sub- contractors to check progress against agreed plans on site. Manage and supervise works including preparing and updating work programs, health and safety information, placing orders, overseeing site matters, reporting to clients and collating and submitting O&M information Ensuring projects are delivered within budgetary constraints by managing financial matters, financial performance and invoicing of works. Maintain, update and action Lifecycle schedules to assist in identifying future opportunities. What we can offer you; Competitive starting salary Car allowance of £5,472 per annum Holiday Entitlement: 25 days Holiday Purchase Scheme: Buy up to an additional 5 days holiday Pension Scheme: 4.5% contributory. Health Cash Plan: helping you spread the cost of essential healthcare 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Wellbeing and mental health champions readily available at work. Access to an employee discount scheme which includes a wide-range of special offers and discounts on insurances, lifestyle goods and services. Flexible benefits for you to choose from including Private Medical, Critical Illness, DenPlan and Cycle to work schemes. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire. Eye care vouchers and free Flu Vaccinations Full training, ongoing coaching and support Opportunities to progress your career across the business This is a permanent position and working hours are Monday to Friday 8am to 5pm. By joining Rydon, you become part of a talented, dedicated team who are passionate about supporting the NHS and its people in their vital work. You will play an important role in ensuring a safe and comfortable environment for staff and service users. Experience Required The successful candidate will have an excellent track record in project managing small works ideally within an FM environment or for a maintenance/refurbishment business. Some previous experience of undertaking works within the NHS would be advantageous. You will also be able to demonstrate the following: Hold a HNC/HND (or equivalent experience) in a relevant engineering or building discipline Technical knowledge in construction or design Strong communication, influencing and facilitation skills, including the ability to communicate complex/technical information Strong analytical & organisational skills, including the maintenance of accurate project records. Health and Safety Qualification such as SMSTS Additional Information As a well established, progressive company we are committed to attracting and retaining individuals by offering an excellent benefits package that includes a wide range of core and voluntary benefits. Rydon is an equal opportunities employer and promotes diversity in employment. Successful candidates will be selected solely on their ability to carry out the duties of the post. To apply online, please use the 'apply for this job link' at the top of this page to be redirected to our dedicated careers page to complete your application.
May 09, 2026
Full time
We are currently seeking a Small Works Project Manager to work with our NHS Clients on facilities management projects in the South East (Kent and Essex). The position will be responsible for managing and successfully delivering all financial and contractual aspects of minor works/small works projects including client variations, small projects and lifecycle works to ensure they are delivered to a high standard on time and within budget. Rydon Maintenance successfully provides hard facilities management services (Hard FM) across England for a growing number of NHS Trusts. We look after more than 250 buildings on behalf of 20 NHS Trusts on a planned, responsive repairs and small works projects basis. We provide maintenance services to hospitals, ambulance trusts, primary care trusts as well as mental health trusts. Our small works team support the NHS with delivering a range of projects from minor adaptations, refurbishments through to repurposing of Trust space. Job Purpose An Small Works Projects Manager you will be responsible for leading a variety of negotiated works including refurbishments, maintenance, and small and minor works on the building fabric or re-modelling across our NHS contracts. This could include minor refurbishments, re-decoration, power installs, flooring refurbishments, LED lighting upgrades, roofing works, boiler updates. You will generally be managing a number of different projects at a time with works up to around 100k in value in total. Key responsibilities will include; Understanding the client's requirement and undertake a full quotation for proposed works. Carry out site walks to advise client on potential works needed, e.g. updating existing plant and general maintenance. Attend client meetings to discuss extra works and to provide updates on current works. Hold regular project meetings with suppliers/ sub- contractors to check progress against agreed plans on site. Manage and supervise works including preparing and updating work programs, health and safety information, placing orders, overseeing site matters, reporting to clients and collating and submitting O&M information Ensuring projects are delivered within budgetary constraints by managing financial matters, financial performance and invoicing of works. Maintain, update and action Lifecycle schedules to assist in identifying future opportunities. What we can offer you; Competitive starting salary Car allowance of £5,472 per annum Holiday Entitlement: 25 days Holiday Purchase Scheme: Buy up to an additional 5 days holiday Pension Scheme: 4.5% contributory. Health Cash Plan: helping you spread the cost of essential healthcare 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Wellbeing and mental health champions readily available at work. Access to an employee discount scheme which includes a wide-range of special offers and discounts on insurances, lifestyle goods and services. Flexible benefits for you to choose from including Private Medical, Critical Illness, DenPlan and Cycle to work schemes. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire. Eye care vouchers and free Flu Vaccinations Full training, ongoing coaching and support Opportunities to progress your career across the business This is a permanent position and working hours are Monday to Friday 8am to 5pm. By joining Rydon, you become part of a talented, dedicated team who are passionate about supporting the NHS and its people in their vital work. You will play an important role in ensuring a safe and comfortable environment for staff and service users. Experience Required The successful candidate will have an excellent track record in project managing small works ideally within an FM environment or for a maintenance/refurbishment business. Some previous experience of undertaking works within the NHS would be advantageous. You will also be able to demonstrate the following: Hold a HNC/HND (or equivalent experience) in a relevant engineering or building discipline Technical knowledge in construction or design Strong communication, influencing and facilitation skills, including the ability to communicate complex/technical information Strong analytical & organisational skills, including the maintenance of accurate project records. Health and Safety Qualification such as SMSTS Additional Information As a well established, progressive company we are committed to attracting and retaining individuals by offering an excellent benefits package that includes a wide range of core and voluntary benefits. Rydon is an equal opportunities employer and promotes diversity in employment. Successful candidates will be selected solely on their ability to carry out the duties of the post. To apply online, please use the 'apply for this job link' at the top of this page to be redirected to our dedicated careers page to complete your application.
We have an opportunity for a Contracts Manager - Mechanical and Electrical to join our team. This role will be based in Wembley, twice a week with travel to other sites, covering London & Hertfordshire as and when required. SNG operates a Hybrid working model, we support both home working & onsite. This pivotal role will oversee replacement, servicing, maintenance, and small project works, ensuring systems are safe, compliant, and operating efficiently. You will play a key role in delivering a high-quality, value-for-money service for our customers. About the Role Lead the management of contracts for assigned mechanical and electrical systems, ensuring safe, compliant, and value-for-money service delivery. Maintain up-to-date knowledge of statutory legislation, British Standards, and guidance (including SFG20), ensuring full compliance with all safety obligations. Monitor contractor performance against specifications and KPIs, chair review meetings, and drive continuous improvement where required. Manage budgets, forecasting, spend control, and authorise payments and contract variations as appropriate. Support procurement activities to ensure contracts are awarded in line with organisational requirements. Analyse repairs data and emerging trends to inform planned works and long-term maintenance strategies. Act as a key point of contact for contractors, customers, and stakeholders, resolving operational matters and keeping customers informed of planned works. Investigate complaints and mechanical-related incidents or emergencies, implementing robust processes to ensure effective resolution and learning. Develop and oversee structured audit and inspection programmes, maintaining accurate electronic compliance records from inception to closure. Build and maintain effective working relationships across teams, contractors, and partners to support successful delivery of SNG's objectives. To Be Successful in This Role Hold a Level 3 NVQ Diploma in Mechanical Engineering Maintenance and Repair (or equivalent experience). Demonstrate strong technical knowledge of M&E systems, safety requirements, and commercial contract management. Have experience managing third-party suppliers and delivering large-scale M&E testing programmes. Possess a sound understanding of current building regulations and Health & Safety legislation, including CDM. Be confident interpreting and applying legislative and regulatory documents. Show strong financial awareness, with the ability to plan, track, and forecast budgets to ensure value for money and mitigate risk. Maintain accurate project and compliance records from inception through to completion. Be an effective communicator with strong interpersonal skills, able to influence, challenge, and represent the organisation professionally. Demonstrate good working knowledge of Microsoft Office (Word, Excel, Outlook). Have strong organisational and time management skills, with the ability to manage competing priorities and work to deadlines under pressure. Be a collaborative team player with integrity and a commitment to continuous learning. Be willing to work in the office and travel between sites as required.
May 09, 2026
Full time
We have an opportunity for a Contracts Manager - Mechanical and Electrical to join our team. This role will be based in Wembley, twice a week with travel to other sites, covering London & Hertfordshire as and when required. SNG operates a Hybrid working model, we support both home working & onsite. This pivotal role will oversee replacement, servicing, maintenance, and small project works, ensuring systems are safe, compliant, and operating efficiently. You will play a key role in delivering a high-quality, value-for-money service for our customers. About the Role Lead the management of contracts for assigned mechanical and electrical systems, ensuring safe, compliant, and value-for-money service delivery. Maintain up-to-date knowledge of statutory legislation, British Standards, and guidance (including SFG20), ensuring full compliance with all safety obligations. Monitor contractor performance against specifications and KPIs, chair review meetings, and drive continuous improvement where required. Manage budgets, forecasting, spend control, and authorise payments and contract variations as appropriate. Support procurement activities to ensure contracts are awarded in line with organisational requirements. Analyse repairs data and emerging trends to inform planned works and long-term maintenance strategies. Act as a key point of contact for contractors, customers, and stakeholders, resolving operational matters and keeping customers informed of planned works. Investigate complaints and mechanical-related incidents or emergencies, implementing robust processes to ensure effective resolution and learning. Develop and oversee structured audit and inspection programmes, maintaining accurate electronic compliance records from inception to closure. Build and maintain effective working relationships across teams, contractors, and partners to support successful delivery of SNG's objectives. To Be Successful in This Role Hold a Level 3 NVQ Diploma in Mechanical Engineering Maintenance and Repair (or equivalent experience). Demonstrate strong technical knowledge of M&E systems, safety requirements, and commercial contract management. Have experience managing third-party suppliers and delivering large-scale M&E testing programmes. Possess a sound understanding of current building regulations and Health & Safety legislation, including CDM. Be confident interpreting and applying legislative and regulatory documents. Show strong financial awareness, with the ability to plan, track, and forecast budgets to ensure value for money and mitigate risk. Maintain accurate project and compliance records from inception through to completion. Be an effective communicator with strong interpersonal skills, able to influence, challenge, and represent the organisation professionally. Demonstrate good working knowledge of Microsoft Office (Word, Excel, Outlook). Have strong organisational and time management skills, with the ability to manage competing priorities and work to deadlines under pressure. Be a collaborative team player with integrity and a commitment to continuous learning. Be willing to work in the office and travel between sites as required.
Job Title: Regional Manager (South of England - Multi site) Location: South of England (Mainly working in Buckinghamshire and Northamptonshire counties) Salary: £70,000 (Including Car allowance) Shift: Monday - Friday (37.5 hours, flexibility required - Hybrid role) Job Role of the Regional Manager (South of England - Multi site) A fantastic opportunity has arisen for an experienced Regional Manager to join a leading engineering services organisation. This is a key leadership role overseeing multiple sites across the South of England, offering the chance to drive operational excellence, commercial performance, and health & safety standards across a diverse portfolio. This position is ideal for a strong people leader who thrives in a fast-paced, customer-facing environment and is looking to make a significant regional impact. You will be responsible for leading multi-site engineering teams, ensuring high performance across KPIs, SLAs, and safety standards, while maintaining strong client relationships and driving continuous improvement initiatives. Sector - Engineering Services Non-Negotiable Requirements of the Regional Manager Background in automated warehousing or similar engineering environments Full UK driving licence Strong customer-facing and account management experience Willingness to travel across the South of England Requirements for the Regional Manager Proven experience managing multi-site operations Strong leadership experience managing Site Managers, Supervisors, and engineering teams Experience delivering against KPIs, SLAs, and operational performance targets Solid understanding of planned and reactive maintenance (PPM & breakdowns) Experience with budget management, cost control, and commercial accountability Strong stakeholder management and client engagement skills Experience using CMMS systems and driving reporting consistency Desirable Requirements for the Regional Manager Experience within logistics, distribution, or material handling environments Previous experience in a regional or senior operational leadership role Health & Safety qualifications or strong working knowledge of H&S legislation The Regional Manager will benefit from: Working for a market-leading organisation Competitive salary and benefits package Opportunity to lead a high-performing regional operation Career progression into senior leadership roles Ongoing training and development If you are interested in this role and feel that you have the right skills, please click apply below. For further details, contact Adem Halil -
May 09, 2026
Full time
Job Title: Regional Manager (South of England - Multi site) Location: South of England (Mainly working in Buckinghamshire and Northamptonshire counties) Salary: £70,000 (Including Car allowance) Shift: Monday - Friday (37.5 hours, flexibility required - Hybrid role) Job Role of the Regional Manager (South of England - Multi site) A fantastic opportunity has arisen for an experienced Regional Manager to join a leading engineering services organisation. This is a key leadership role overseeing multiple sites across the South of England, offering the chance to drive operational excellence, commercial performance, and health & safety standards across a diverse portfolio. This position is ideal for a strong people leader who thrives in a fast-paced, customer-facing environment and is looking to make a significant regional impact. You will be responsible for leading multi-site engineering teams, ensuring high performance across KPIs, SLAs, and safety standards, while maintaining strong client relationships and driving continuous improvement initiatives. Sector - Engineering Services Non-Negotiable Requirements of the Regional Manager Background in automated warehousing or similar engineering environments Full UK driving licence Strong customer-facing and account management experience Willingness to travel across the South of England Requirements for the Regional Manager Proven experience managing multi-site operations Strong leadership experience managing Site Managers, Supervisors, and engineering teams Experience delivering against KPIs, SLAs, and operational performance targets Solid understanding of planned and reactive maintenance (PPM & breakdowns) Experience with budget management, cost control, and commercial accountability Strong stakeholder management and client engagement skills Experience using CMMS systems and driving reporting consistency Desirable Requirements for the Regional Manager Experience within logistics, distribution, or material handling environments Previous experience in a regional or senior operational leadership role Health & Safety qualifications or strong working knowledge of H&S legislation The Regional Manager will benefit from: Working for a market-leading organisation Competitive salary and benefits package Opportunity to lead a high-performing regional operation Career progression into senior leadership roles Ongoing training and development If you are interested in this role and feel that you have the right skills, please click apply below. For further details, contact Adem Halil -
FMCG Manufacturing Own & Shape the Engineering Function Step into a role where engineering excellence fuels the growth of one of the world s fastest-rising active nutrition brands. Bulk is scaling fast - investing in manufacturing capability, operational performance and innovation as it evolves into a true global destination brand. This is a rare opportunity to join at a pivotal stage of that journey. As Lead Maintenance Engineer , you ll do far more than maintain equipment. You ll take ownership of engineering reliability across the site, helping shape systems, improve performance and build a best-in-class maintenance function. From driving preventative maintenance strategy to leading engineering projects and continuous improvement initiatives, your work will have visible impact from day one. If you re an ambitious engineering professional who thrives on autonomy, improvement and making things better, this is your chance to put your stamp on a fast-growing global brand. The Role at a Glance: Senior Maintenance Engineer Colchester, UK Site Based Competitive Salary DOE Plus Perkbox, Pension, 60% Product Discount, Healthcare & More Values & Culture: Aspiring, Accountable, Conscious, Considerate Company: Award-Winning Wellness and Sports Nutrition Brand Pedigree: One of the fastest-growing nutrition brands globally Ready to put your stamp on a fast-scaling global brand? Bulk is on a mission to evolve from a manufacturing-led retailer into a destination brand for active nutrition. Through bold, disruptive marketing and a relentless focus on quality, they re reshaping how people think about sports nutrition. We're now looking for a Senior Maintenance Engineer to take ownership of engineering reliability across our manufacturing operation. This is more than a maintenance role. It s an opportunity to build, influence and lead from the ground up - driving change, implementing systems, and creating a best-in-class engineering function. The Opportunity Reporting to the UK Manufacturing & Global Development Manager, you ll play a critical role in ensuring the continuity and performance of manufacturing operations. With health & safety as your foundation, you ll take a proactive, strategic approach - developing maintenance frameworks, improving asset reliability, and helping scale the engineering capability of the site. If you re someone who enjoys ownership, autonomy, and making a visible impact, this role gives you the platform to do exactly that. What You ll Be Doing • Designing and implementing a robust Planned Preventative Maintenance (PPM) programme • Managing and optimising a CMMS system to track performance and drive improvements • Leading and supporting site-wide engineering projects • Managing spares inventory to ensure operational continuity • Coordinating and overseeing external contractors • Supporting the installation of new machinery and processes • Managing the engineering budget in line with forecasts • Identifying and driving process improvements, particularly during peak demand • Conducting root cause analysis and implementing preventative solutions • Ensuring compliance with equipment reliability and safety standards • Communicating effectively across teams to keep projects moving forward About You • Proven experience in FMCG or a similar manufacturing environment • Strong working knowledge of CMMS systems (QRmaint or similar) • Solid background working with manufacturing machinery and equipment • Ideally degree-qualified in Mechanical Engineering (BEng/MEng) • Comfortable managing multiple projects simultaneously • Highly organised with the ability to lead, prioritise and delegate • A proactive mindset with a drive to improve, challenge and innovate • Strong communicator with a collaborative, team-first approach What s In It For You? • Birthday day off • PerkBox subscription • 60% discount on Bulk products • Pension scheme • Life assurance • Medicash healthcare • Paid volunteering day • Cycle to Work scheme • Enhanced family leave • Fully stocked Bulk pantry • hursday & Friday drinks fridge A Culture You ll Want To Be Part Of Bulk is built on the belief that diverse thinking drives better outcomes. Every team member has a voice, and individuality is celebrated. They re committed to building an inclusive workplace where everyone, regardless of background, can thrive, contribute and make an impact. Ready to take ownership of a critical engineering function within one of the fastest-growing brands in active nutrition? If you re looking for a role where you can influence change, drive operational excellence and grow with an ambitious global business, we d love to hear from you. Apply now for a fast-track path to the Hiring Manager. Interested? Apply here for a fast-track path to the Hiring Manager Application notice We take your privacy seriously. As you might expect you may be contacted by email, text or telephone. Your data is processed by our talent partner RR (Recruitment Revolution) on the basis of their legitimate interests in fulfilling the recruitment process. Please refer to their Data Privacy Policy & Notice on their website for further details.
May 09, 2026
Full time
FMCG Manufacturing Own & Shape the Engineering Function Step into a role where engineering excellence fuels the growth of one of the world s fastest-rising active nutrition brands. Bulk is scaling fast - investing in manufacturing capability, operational performance and innovation as it evolves into a true global destination brand. This is a rare opportunity to join at a pivotal stage of that journey. As Lead Maintenance Engineer , you ll do far more than maintain equipment. You ll take ownership of engineering reliability across the site, helping shape systems, improve performance and build a best-in-class maintenance function. From driving preventative maintenance strategy to leading engineering projects and continuous improvement initiatives, your work will have visible impact from day one. If you re an ambitious engineering professional who thrives on autonomy, improvement and making things better, this is your chance to put your stamp on a fast-growing global brand. The Role at a Glance: Senior Maintenance Engineer Colchester, UK Site Based Competitive Salary DOE Plus Perkbox, Pension, 60% Product Discount, Healthcare & More Values & Culture: Aspiring, Accountable, Conscious, Considerate Company: Award-Winning Wellness and Sports Nutrition Brand Pedigree: One of the fastest-growing nutrition brands globally Ready to put your stamp on a fast-scaling global brand? Bulk is on a mission to evolve from a manufacturing-led retailer into a destination brand for active nutrition. Through bold, disruptive marketing and a relentless focus on quality, they re reshaping how people think about sports nutrition. We're now looking for a Senior Maintenance Engineer to take ownership of engineering reliability across our manufacturing operation. This is more than a maintenance role. It s an opportunity to build, influence and lead from the ground up - driving change, implementing systems, and creating a best-in-class engineering function. The Opportunity Reporting to the UK Manufacturing & Global Development Manager, you ll play a critical role in ensuring the continuity and performance of manufacturing operations. With health & safety as your foundation, you ll take a proactive, strategic approach - developing maintenance frameworks, improving asset reliability, and helping scale the engineering capability of the site. If you re someone who enjoys ownership, autonomy, and making a visible impact, this role gives you the platform to do exactly that. What You ll Be Doing • Designing and implementing a robust Planned Preventative Maintenance (PPM) programme • Managing and optimising a CMMS system to track performance and drive improvements • Leading and supporting site-wide engineering projects • Managing spares inventory to ensure operational continuity • Coordinating and overseeing external contractors • Supporting the installation of new machinery and processes • Managing the engineering budget in line with forecasts • Identifying and driving process improvements, particularly during peak demand • Conducting root cause analysis and implementing preventative solutions • Ensuring compliance with equipment reliability and safety standards • Communicating effectively across teams to keep projects moving forward About You • Proven experience in FMCG or a similar manufacturing environment • Strong working knowledge of CMMS systems (QRmaint or similar) • Solid background working with manufacturing machinery and equipment • Ideally degree-qualified in Mechanical Engineering (BEng/MEng) • Comfortable managing multiple projects simultaneously • Highly organised with the ability to lead, prioritise and delegate • A proactive mindset with a drive to improve, challenge and innovate • Strong communicator with a collaborative, team-first approach What s In It For You? • Birthday day off • PerkBox subscription • 60% discount on Bulk products • Pension scheme • Life assurance • Medicash healthcare • Paid volunteering day • Cycle to Work scheme • Enhanced family leave • Fully stocked Bulk pantry • hursday & Friday drinks fridge A Culture You ll Want To Be Part Of Bulk is built on the belief that diverse thinking drives better outcomes. Every team member has a voice, and individuality is celebrated. They re committed to building an inclusive workplace where everyone, regardless of background, can thrive, contribute and make an impact. Ready to take ownership of a critical engineering function within one of the fastest-growing brands in active nutrition? If you re looking for a role where you can influence change, drive operational excellence and grow with an ambitious global business, we d love to hear from you. Apply now for a fast-track path to the Hiring Manager. Interested? Apply here for a fast-track path to the Hiring Manager Application notice We take your privacy seriously. As you might expect you may be contacted by email, text or telephone. Your data is processed by our talent partner RR (Recruitment Revolution) on the basis of their legitimate interests in fulfilling the recruitment process. Please refer to their Data Privacy Policy & Notice on their website for further details.
Maintenance Engineer West Wales £40,000 per year What You'll Do: You will join a fast paced food manufacturing environment as a Multiskilled Maintenance Engineer with a strong electrical skill set. This is a hands on, days based role supporting planned and reactive maintenance across a wide range of production and packing machinery. With major site investment underway, including new automated lines and a modern workshop, you will play a key part in maintaining reliability while the site continues to expand. Your role will involve: Carrying out planned and reactive maintenance on production equipment Working with three phase systems, motors, control panels and electrical circuits Fault finding and diagnosing breakdowns quickly and safely Supporting mechanical repairs as part of a genuinely multiskilled team Basic PLC fault finding on digital and analogue systems, with training available Assisting with installation and commissioning of new machinery and future automated lines Working days, typically around 50 hours a week, with some flexibility around start and finish times Maintaining safe working practices and contributing to continuous improvement What You'll Bring: Experience as a Maintenance or Multiskilled Engineer within manufacturing, ideally food or FMCG Strong electrical competency, particularly with three phase and control panel work Good mechanical capability and confidence handling mechanical breakdowns Familiarity with PLC fault finding or an interest in developing these skills Practical, positive attitude with the willingness to get stuck in Flexibility to support production requirements when needed, while working within a supportive team Desire to learn, take feedback and grow with a developing engineering function Strong commitment to safe working and high maintenance standards Why You Should Apply: Salary of around £40,000 with significant overtime availability Days based role in a busy food manufacturing environment Join a site investing in new equipment, automation and a state of the art workshop Become a key part of a small engineering team where your contribution is valued Supportive and hands on manager who understands flexibility and family commitments Opportunity to grow your skills in PLCs, automation and modern production systems Long term progression as the site continues to expand and strengthen the engineering department Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities!
May 09, 2026
Full time
Maintenance Engineer West Wales £40,000 per year What You'll Do: You will join a fast paced food manufacturing environment as a Multiskilled Maintenance Engineer with a strong electrical skill set. This is a hands on, days based role supporting planned and reactive maintenance across a wide range of production and packing machinery. With major site investment underway, including new automated lines and a modern workshop, you will play a key part in maintaining reliability while the site continues to expand. Your role will involve: Carrying out planned and reactive maintenance on production equipment Working with three phase systems, motors, control panels and electrical circuits Fault finding and diagnosing breakdowns quickly and safely Supporting mechanical repairs as part of a genuinely multiskilled team Basic PLC fault finding on digital and analogue systems, with training available Assisting with installation and commissioning of new machinery and future automated lines Working days, typically around 50 hours a week, with some flexibility around start and finish times Maintaining safe working practices and contributing to continuous improvement What You'll Bring: Experience as a Maintenance or Multiskilled Engineer within manufacturing, ideally food or FMCG Strong electrical competency, particularly with three phase and control panel work Good mechanical capability and confidence handling mechanical breakdowns Familiarity with PLC fault finding or an interest in developing these skills Practical, positive attitude with the willingness to get stuck in Flexibility to support production requirements when needed, while working within a supportive team Desire to learn, take feedback and grow with a developing engineering function Strong commitment to safe working and high maintenance standards Why You Should Apply: Salary of around £40,000 with significant overtime availability Days based role in a busy food manufacturing environment Join a site investing in new equipment, automation and a state of the art workshop Become a key part of a small engineering team where your contribution is valued Supportive and hands on manager who understands flexibility and family commitments Opportunity to grow your skills in PLCs, automation and modern production systems Long term progression as the site continues to expand and strengthen the engineering department Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities!
Our client is a National manufacturer FMCG products. This position will focus upon their semi- automated manufacturing operations, based in the Birstall area of Leeds. Reporting to the Operations Director, the role will be focused around the development of their manufacturing teams, systems and processes. Taking responsibility for Production, Engineering, CI, Quality, H&S and logistics. With big investment planned over the next few years. We are looking for someone with extensive experience with People focused management skills in a manufacturing environment What's in it for you as Factory Manager; A Salary of 70,0000 KPI Driven Bonus Monday - Friday Working (Core hours 8am-5pm) Flexibility within reason Enhanced Company Pension Working with a forward thinking FMCG manufacturing company with huge invest plans including company expansion Genuine Career development available with large investment Description of the Factory Manager Responsible for the overall management of manufacturing sites covering engineering, maintenance, H&S, Logistics and manufacturing operations Overall headcount between 90-110 reports, Direct and lead direct reports across the site, Accountable for all QHSE and 5s initiatives across the sites. Develop and maintain qualified personnel within the departments and delivering Morning meetings with delivery of Toolbox Talks Drive a continuous improvement mind-set within plant environment, Control all costs that directly affect the plants performance. Key Roles and Requirements of the Factory Manager Worked at a Site General Manager, Plant manager, Operations manager, factory manager, Senior Production Manager or equivalent experience. Substantial experience gained in a senior level operations role within a complex, results orientated environment Able to demonstrate track record of success in a changing, fast moving environment with a heavy Project focus Ability to clearly identify bottlenecks within a manufacturing process, capable of quickly interpreting and 'owning' the process and able to extrapolate the detail Highly KPI orientated - capable of achieving over and above expectations, use the information to create further business growth/development Essential Experience needed for the Factory Manager Experience ideally within Kaizen, Six Sigma or Lean Manufacturing with NEBOSH desirable IOSH essential Be able to deliver Daily, Weekly and Monthly reports into the Operations Director and Working with and alongside Senior Leadership stakeholders within the business Previously worked within Manufacturing liaising with Production, HSE, Quality, Warehousing and Engineering This position would suit Operations Manufacturing Manager, Senior Production Manager, Senior Site Manufacturing Lead or Factory Manager
May 09, 2026
Full time
Our client is a National manufacturer FMCG products. This position will focus upon their semi- automated manufacturing operations, based in the Birstall area of Leeds. Reporting to the Operations Director, the role will be focused around the development of their manufacturing teams, systems and processes. Taking responsibility for Production, Engineering, CI, Quality, H&S and logistics. With big investment planned over the next few years. We are looking for someone with extensive experience with People focused management skills in a manufacturing environment What's in it for you as Factory Manager; A Salary of 70,0000 KPI Driven Bonus Monday - Friday Working (Core hours 8am-5pm) Flexibility within reason Enhanced Company Pension Working with a forward thinking FMCG manufacturing company with huge invest plans including company expansion Genuine Career development available with large investment Description of the Factory Manager Responsible for the overall management of manufacturing sites covering engineering, maintenance, H&S, Logistics and manufacturing operations Overall headcount between 90-110 reports, Direct and lead direct reports across the site, Accountable for all QHSE and 5s initiatives across the sites. Develop and maintain qualified personnel within the departments and delivering Morning meetings with delivery of Toolbox Talks Drive a continuous improvement mind-set within plant environment, Control all costs that directly affect the plants performance. Key Roles and Requirements of the Factory Manager Worked at a Site General Manager, Plant manager, Operations manager, factory manager, Senior Production Manager or equivalent experience. Substantial experience gained in a senior level operations role within a complex, results orientated environment Able to demonstrate track record of success in a changing, fast moving environment with a heavy Project focus Ability to clearly identify bottlenecks within a manufacturing process, capable of quickly interpreting and 'owning' the process and able to extrapolate the detail Highly KPI orientated - capable of achieving over and above expectations, use the information to create further business growth/development Essential Experience needed for the Factory Manager Experience ideally within Kaizen, Six Sigma or Lean Manufacturing with NEBOSH desirable IOSH essential Be able to deliver Daily, Weekly and Monthly reports into the Operations Director and Working with and alongside Senior Leadership stakeholders within the business Previously worked within Manufacturing liaising with Production, HSE, Quality, Warehousing and Engineering This position would suit Operations Manufacturing Manager, Senior Production Manager, Senior Site Manufacturing Lead or Factory Manager
About the Role RG Setsquare is recruiting on behalf of a leading facilities management and public services contractor for an experienced Senior Scheduler to join their busy operations team in Tamworth. This is a step-up opportunity for an accomplished planner or scheduler looking to take on greater responsibility. You will sit at the heart of a high-volume, multi-trade maintenance operation - supervising the planning team, managing workload distribution, and ensuring that responsive and planned repairs are delivered on time, within SLA, and to a high standard of tenant satisfaction. Our client is a nationally recognised FM contractor with a strong pipeline of housing and public sector contracts. Full details will be shared with shortlisted candidates. What You'll Be Doing As Senior Scheduler, you will take ownership of team coordination and operational performance: Supervise and guide a team of planners, ensuring tasks are prioritised effectively and processes are followed consistently Oversee workload allocation across the planning team to maintain balance and operational efficiency Develop strategies for large-scale and long-term maintenance programmes - including cyclical maintenance and refurbishment schedules Manage complex scheduling tasks involving multiple trades, high-volume repairs, and regulatory deadlines Ensure optimal use of operatives, subcontractors, and materials to meet both immediate and future demands Monitor team KPIs including first-time fix rates, SLA adherence, and tenant satisfaction - taking corrective action where needed Prepare and present performance reports to management, highlighting trends, risks, and areas for improvement Act as the key liaison between the planning team, contract managers, and operatives to ensure seamless day-to-day communication Handle escalated tenant complaints, ensuring timely resolution and a consistently high standard of customer service Monitor scheduling efficiency to minimise costs while maintaining service quality Provide data-driven insights to senior management to support operational decision-making Oversee operative rotas and ensure appropriate staffing levels for routine, planned, and out-of-hours repairs What We're Looking For You'll be well-suited to this role if you have: Previous experience in a senior scheduler, senior planner, or planning team leader role within FM, housing maintenance, or a similar repairs environment Proven knowledge of helpdesk call processes and works administration Strong skills in the planning, prioritisation, and allocation of works to multi-trade operatives Experience supervising or mentoring junior team members and training staff on scheduling processes The ability to work well under pressure and manage competing priorities in a fast-paced, target-driven environment Confidence working with job management, CAFM, or scheduling systems Strong communication skills and a solutions-focused mindset What's on Offer The successful candidate will receive a salary of 30,000 - 32,000 (depending on experience), plus a benefits package including: 24 days annual leave plus public holidays Life cover equivalent to 1.5x annual salary Employee discount shopping schemes across major brands and retailers Gym membership discounts and cycle to work scheme Holiday purchase scheme 2 paid corporate social responsibility days per year Broad learning and development opportunities, including professional qualifications and individual training programmes Attractive employee referral rewards scheme Access to inclusive employee networks 24/7 Employee Assistance Programme and mental wellbeing app How to Apply To be considered, please submit your CV clearly demonstrating your Facilities or Maintenance Scheduling experience. Shortlisted candidates will be contacted directly by our team with full information on the client and site. RG Setsquare specialises in facilities management recruitment across the UK, placing professionals at every level - from schedulers and helpdesk coordinators through to contract managers and directors. Ready to step up? Apply now and let's talk. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
May 08, 2026
Full time
About the Role RG Setsquare is recruiting on behalf of a leading facilities management and public services contractor for an experienced Senior Scheduler to join their busy operations team in Tamworth. This is a step-up opportunity for an accomplished planner or scheduler looking to take on greater responsibility. You will sit at the heart of a high-volume, multi-trade maintenance operation - supervising the planning team, managing workload distribution, and ensuring that responsive and planned repairs are delivered on time, within SLA, and to a high standard of tenant satisfaction. Our client is a nationally recognised FM contractor with a strong pipeline of housing and public sector contracts. Full details will be shared with shortlisted candidates. What You'll Be Doing As Senior Scheduler, you will take ownership of team coordination and operational performance: Supervise and guide a team of planners, ensuring tasks are prioritised effectively and processes are followed consistently Oversee workload allocation across the planning team to maintain balance and operational efficiency Develop strategies for large-scale and long-term maintenance programmes - including cyclical maintenance and refurbishment schedules Manage complex scheduling tasks involving multiple trades, high-volume repairs, and regulatory deadlines Ensure optimal use of operatives, subcontractors, and materials to meet both immediate and future demands Monitor team KPIs including first-time fix rates, SLA adherence, and tenant satisfaction - taking corrective action where needed Prepare and present performance reports to management, highlighting trends, risks, and areas for improvement Act as the key liaison between the planning team, contract managers, and operatives to ensure seamless day-to-day communication Handle escalated tenant complaints, ensuring timely resolution and a consistently high standard of customer service Monitor scheduling efficiency to minimise costs while maintaining service quality Provide data-driven insights to senior management to support operational decision-making Oversee operative rotas and ensure appropriate staffing levels for routine, planned, and out-of-hours repairs What We're Looking For You'll be well-suited to this role if you have: Previous experience in a senior scheduler, senior planner, or planning team leader role within FM, housing maintenance, or a similar repairs environment Proven knowledge of helpdesk call processes and works administration Strong skills in the planning, prioritisation, and allocation of works to multi-trade operatives Experience supervising or mentoring junior team members and training staff on scheduling processes The ability to work well under pressure and manage competing priorities in a fast-paced, target-driven environment Confidence working with job management, CAFM, or scheduling systems Strong communication skills and a solutions-focused mindset What's on Offer The successful candidate will receive a salary of 30,000 - 32,000 (depending on experience), plus a benefits package including: 24 days annual leave plus public holidays Life cover equivalent to 1.5x annual salary Employee discount shopping schemes across major brands and retailers Gym membership discounts and cycle to work scheme Holiday purchase scheme 2 paid corporate social responsibility days per year Broad learning and development opportunities, including professional qualifications and individual training programmes Attractive employee referral rewards scheme Access to inclusive employee networks 24/7 Employee Assistance Programme and mental wellbeing app How to Apply To be considered, please submit your CV clearly demonstrating your Facilities or Maintenance Scheduling experience. Shortlisted candidates will be contacted directly by our team with full information on the client and site. RG Setsquare specialises in facilities management recruitment across the UK, placing professionals at every level - from schedulers and helpdesk coordinators through to contract managers and directors. Ready to step up? Apply now and let's talk. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Right Now Group are currently partnered with an leader who are recruiting within their Commercial Catering team in the London region after a continued period of sustained growth. If you consider yourself to be suitable for a Commercial Catering Engineer role with a white goods focus and want to work for an industry leader, who focus on quality over quantity and set realist expectations, then this could be the role for you. IMPORTANT: A company Van is provided - please note all applicants must have a full drivers license due to the nature of this role. This position will require regular travel into the city of London. Job Title: Commercial Catering Engineer Location: Willing to travel to London Salary: 48,000 to 55,000 Hours: 40 per week 1 in 4 weekend Standby Fee a £50 standby fee is paid for being on call Sundays and Bank Holidays (Bank Holidays are voluntary and not part of the 1 in 4 rota) Monday to Friday 1.5 x basic hourly rate once 8.5 Hours have elapsed Saturday all day - 1.5 x basic hourly rate for all hours worked Sunday all day - 2.0 x basic hourly rate for all hours worked Bank Holidays all day 2.5 x basic hourly rate for all hours worked Role Overview Service, maintenance and repair of all commercial catering kitchen equipment: combi ovens, fryers, ranges, griddles Reactive repairs: Responding to emergency breakdowns to diagnose and fix faults on-site. Planned preventative maintenance (PPM): Conducting routine servicing, safety checks, and inspections to prevent future breakdowns and extend the lifespan of equipment. Installation and commissioning: Fitting new gas and electrical catering equipment and ensuring it operates to the manufacturer's specifications. Fault-finding and diagnostics: Troubleshooting complex electrical and gas system issues. Compliance and safety: Performing gas safety inspections (such as COMCAT) to meet legal and regulatory requirements and documenting all work thoroughly. Customer service: Communicating with clients, who are often stressed chefs or kitchen managers, to manage expectations and provide a professional service. Stock management: Maintaining and managing a stock of spare parts in a company vehicle to maximize the chances of a first-visit repair. Key Skills COMCAT 1, 2, 3, and 5 qualifications are essential. Commercial Gas Qualification (ACS or equivalent) is highly desirable. Strong understanding of electrical and mechanical systems related to catering equipment. Experience using service management software (e.g., Servicemax Joblogic, ServiceM8, or similar). Excellent written communication skills for report writing and documentation. Strong problem-solving skills and attention to detail.
May 08, 2026
Full time
Right Now Group are currently partnered with an leader who are recruiting within their Commercial Catering team in the London region after a continued period of sustained growth. If you consider yourself to be suitable for a Commercial Catering Engineer role with a white goods focus and want to work for an industry leader, who focus on quality over quantity and set realist expectations, then this could be the role for you. IMPORTANT: A company Van is provided - please note all applicants must have a full drivers license due to the nature of this role. This position will require regular travel into the city of London. Job Title: Commercial Catering Engineer Location: Willing to travel to London Salary: 48,000 to 55,000 Hours: 40 per week 1 in 4 weekend Standby Fee a £50 standby fee is paid for being on call Sundays and Bank Holidays (Bank Holidays are voluntary and not part of the 1 in 4 rota) Monday to Friday 1.5 x basic hourly rate once 8.5 Hours have elapsed Saturday all day - 1.5 x basic hourly rate for all hours worked Sunday all day - 2.0 x basic hourly rate for all hours worked Bank Holidays all day 2.5 x basic hourly rate for all hours worked Role Overview Service, maintenance and repair of all commercial catering kitchen equipment: combi ovens, fryers, ranges, griddles Reactive repairs: Responding to emergency breakdowns to diagnose and fix faults on-site. Planned preventative maintenance (PPM): Conducting routine servicing, safety checks, and inspections to prevent future breakdowns and extend the lifespan of equipment. Installation and commissioning: Fitting new gas and electrical catering equipment and ensuring it operates to the manufacturer's specifications. Fault-finding and diagnostics: Troubleshooting complex electrical and gas system issues. Compliance and safety: Performing gas safety inspections (such as COMCAT) to meet legal and regulatory requirements and documenting all work thoroughly. Customer service: Communicating with clients, who are often stressed chefs or kitchen managers, to manage expectations and provide a professional service. Stock management: Maintaining and managing a stock of spare parts in a company vehicle to maximize the chances of a first-visit repair. Key Skills COMCAT 1, 2, 3, and 5 qualifications are essential. Commercial Gas Qualification (ACS or equivalent) is highly desirable. Strong understanding of electrical and mechanical systems related to catering equipment. Experience using service management software (e.g., Servicemax Joblogic, ServiceM8, or similar). Excellent written communication skills for report writing and documentation. Strong problem-solving skills and attention to detail.
POST TITLE Network Engineer DEPARTMENT ICT Department REPORTS TO ICT Infrastructure Manager Location - Conwy Salary : £31,537 to £34,434 and is subject to an additional 8.5% pay allowance for providing out of hours cover upon successful completion of initial training. OVERALL JOB PURPOSE To assist the ICT Infrastructure Manager in the performance of his/her duties and responsibilities on all aspects of networks, fixed and mobile communications and its associated subjects by providing technical knowledge and support across a range of devices and technologies. To provide an initial escalation point to the organisation for networks, fixed and mobile communications. To provide documentation, guidance and support to colleagues in the ICT department and the in the user community. To work in a demanding environment where both precision and accountability are critical. To assist the Infrastructure Team with, and work towards NCSC guidance on system best-practices and implementing a high level of technical security across all Service technologies. PRINCIPAL DUTIES AND RESPONSIBILITIES 1. Ensure the smooth day-to-day running of the network and telecom systems. Monitor network performance, trends and events. Advise and recommend activities to the ICT Infrastructure Manager on all technical matters concerning the network and communication systems. 2. Assist with installations, rectification of faults, repairs and redesigns of the infrastructure. Undertake planned maintenance, modification, backup and patching of all network and telecom devices. Assist the Infrastructure team with similar system related tasks. 3. Assist with the research and development of ICT Infrastructure technologies and assess their impact and suitability for the Service environment. 4. Provide support to the other ICT teams for Infrastructure issues. Liaise with service & equipment providers and public authorities. Represent the Infrastructure team at meetings. 5. Assist with the production of contract specifications and project scopes. Review and modify tariffs and price plans to ensure best value for money. 6. Produce statistics and reports; respond to Freedom of Information requests. 7. Cascade knowledge by the production of documentation, verbal guidance and training to colleagues in the ICT department and in the user community. 8. Maintain adequate stocks levels. Update and assist with auditing the asset database. 9. Participation in a rota to provide support for critical incidents during unsociable hours and weekends. 10. Assist the Infrastructure team with projects and tasks when necessary to meet targets, deadlines and provide resilience. 11. Any other duties commensurate with the grade and role. SUPERVISORY RESPONSIBILITY Supervision of suppliers, contractors and consultants involved in the provision of goods or services. FINANCIAL RESPONSIBILITY None. CONTACTS OUTSIDE OWN SECTION All NWFRS staff. Counterparts in other emergency services and local authorities, suppliers, consultants and contractors. On occasions too, members of the public. LANGUAGE REQUIREMENTS Level 2 Welsh. EMPLOYMENT CHECKS / SPECIFIC REQUIREMENTS NPPV Level Security 2 clearance. MANDATORY TRAINING Cisco Certified Network Associate. OTHER Working mainly indoors. May be required to visit other sites including those undergoing renovations work. Will be required to work in high security locations.
May 08, 2026
Full time
POST TITLE Network Engineer DEPARTMENT ICT Department REPORTS TO ICT Infrastructure Manager Location - Conwy Salary : £31,537 to £34,434 and is subject to an additional 8.5% pay allowance for providing out of hours cover upon successful completion of initial training. OVERALL JOB PURPOSE To assist the ICT Infrastructure Manager in the performance of his/her duties and responsibilities on all aspects of networks, fixed and mobile communications and its associated subjects by providing technical knowledge and support across a range of devices and technologies. To provide an initial escalation point to the organisation for networks, fixed and mobile communications. To provide documentation, guidance and support to colleagues in the ICT department and the in the user community. To work in a demanding environment where both precision and accountability are critical. To assist the Infrastructure Team with, and work towards NCSC guidance on system best-practices and implementing a high level of technical security across all Service technologies. PRINCIPAL DUTIES AND RESPONSIBILITIES 1. Ensure the smooth day-to-day running of the network and telecom systems. Monitor network performance, trends and events. Advise and recommend activities to the ICT Infrastructure Manager on all technical matters concerning the network and communication systems. 2. Assist with installations, rectification of faults, repairs and redesigns of the infrastructure. Undertake planned maintenance, modification, backup and patching of all network and telecom devices. Assist the Infrastructure team with similar system related tasks. 3. Assist with the research and development of ICT Infrastructure technologies and assess their impact and suitability for the Service environment. 4. Provide support to the other ICT teams for Infrastructure issues. Liaise with service & equipment providers and public authorities. Represent the Infrastructure team at meetings. 5. Assist with the production of contract specifications and project scopes. Review and modify tariffs and price plans to ensure best value for money. 6. Produce statistics and reports; respond to Freedom of Information requests. 7. Cascade knowledge by the production of documentation, verbal guidance and training to colleagues in the ICT department and in the user community. 8. Maintain adequate stocks levels. Update and assist with auditing the asset database. 9. Participation in a rota to provide support for critical incidents during unsociable hours and weekends. 10. Assist the Infrastructure team with projects and tasks when necessary to meet targets, deadlines and provide resilience. 11. Any other duties commensurate with the grade and role. SUPERVISORY RESPONSIBILITY Supervision of suppliers, contractors and consultants involved in the provision of goods or services. FINANCIAL RESPONSIBILITY None. CONTACTS OUTSIDE OWN SECTION All NWFRS staff. Counterparts in other emergency services and local authorities, suppliers, consultants and contractors. On occasions too, members of the public. LANGUAGE REQUIREMENTS Level 2 Welsh. EMPLOYMENT CHECKS / SPECIFIC REQUIREMENTS NPPV Level Security 2 clearance. MANDATORY TRAINING Cisco Certified Network Associate. OTHER Working mainly indoors. May be required to visit other sites including those undergoing renovations work. Will be required to work in high security locations.
Operations Manager Bristol Permanent Role up to £70,000 The Company: Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment from executive to operative level. With offices in London, Manchester, and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a social housing maintenance company, who are looking for an Operations Manager based in Bristol . The Operations Manager will be responsible for managing project teams, delivering planned maintenance, refurbishment and void works across social housing projects Duties & Responsibilities of the Operations Manager: Promote and maintain the highest standards of health, safety and environmental management. Lead and monitor project strategies to achieve the company s sustainability objectives. Identify and manage commercial risks across the business. Develop excellent relationships with client representatives, consultants, and other stakeholders. Ensure a robust strategy is in place for dealing with complaints and managing defects. Ensure robust strategy for delivering quality throughout project lifecycle with Zero defects as a target on handover. What you will need for the Operations Manager post: Project management experience gained in a similar environment including directing resource and cost control. Experience managing multiple workstreams at once with oversight of 10 million pounds contracts Experience of delivering capital works, repair maintenance and larger scale projects, particularly through subcontract and supply chain arrangements. Role specific qualifications Strong knowledge surrounding current legislations Proven experience carrying out a similar role specifically within social housing Benefits of the Operations Manager role: General permanent benefits Please apply or contact Chelsie Fowler at Build Recruitment if you are interested in the Operations Manager role - (phone number removed) / (url removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
May 08, 2026
Full time
Operations Manager Bristol Permanent Role up to £70,000 The Company: Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment from executive to operative level. With offices in London, Manchester, and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a social housing maintenance company, who are looking for an Operations Manager based in Bristol . The Operations Manager will be responsible for managing project teams, delivering planned maintenance, refurbishment and void works across social housing projects Duties & Responsibilities of the Operations Manager: Promote and maintain the highest standards of health, safety and environmental management. Lead and monitor project strategies to achieve the company s sustainability objectives. Identify and manage commercial risks across the business. Develop excellent relationships with client representatives, consultants, and other stakeholders. Ensure a robust strategy is in place for dealing with complaints and managing defects. Ensure robust strategy for delivering quality throughout project lifecycle with Zero defects as a target on handover. What you will need for the Operations Manager post: Project management experience gained in a similar environment including directing resource and cost control. Experience managing multiple workstreams at once with oversight of 10 million pounds contracts Experience of delivering capital works, repair maintenance and larger scale projects, particularly through subcontract and supply chain arrangements. Role specific qualifications Strong knowledge surrounding current legislations Proven experience carrying out a similar role specifically within social housing Benefits of the Operations Manager role: General permanent benefits Please apply or contact Chelsie Fowler at Build Recruitment if you are interested in the Operations Manager role - (phone number removed) / (url removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
Randstad Construction & Property
Wakefield, Yorkshire
Randstad are working with a leading UK Facilities Management provider who is seeking an experienced Hard Services Manager to join their estates team. This role is focused on delivering high-quality, best-value maintenance services while driving a sustainable approach to estates management and providing technical leadership to a multi-discipline team. Package Competitive rate between 30 - 35 per hour (depending on experience) Working Hours: 9am - 5pm, 40 hours per week Schedule: Monday to Friday Position Type: Temporary with opportunity for permanent Duties Maintains full ownership of Building and Asset Maintenance KPIs to ensure all service levels are met and contract penalties are avoided. Leads a multi-discipline team of maintenance engineers and provides the technical guidance needed to resolve complex plant faults. Manages specialist supply chain partners, including market-testing for best value and ensuring work meets quality and cost standards. Coordinates unplanned work and remedial actions rapidly to ensure zero disruption to core operations. Works with the planning team to optimise the CAFM system and schedule preventative maintenance to reduce long-term asset failure. Supports the development of annual budgets and identifies site efficiencies to directly improve contract margins. Authors Risk Assessments and Method Statements for all site works to ensure staff operate safely in high-risk environments. Acts as the engineering lead for the designated area, ensuring all maintained assets have compliant evidence of completion. Operates safe working practices with due regard to Health and Safety Regulations, COSHH, and legislative requirements. Maintains detailed asset histories, maintenance records, and helpdesk reports to inform necessary follow-up actions. Supports the management of systems and processes in line with quality assurance policies to encourage continual improvement. Qualifications: Relevant trade qualification (Mechanical or Electrical). Proven experience managing a multi-disciplined hard FM team. Strong awareness of statutory requirements and technical compliance. Excellent communication and leadership skills. Proficiency in operating IT systems, specifically CAFM software. Experience in budget management, trend identification, and driving cost-effective practices. Full UK Driving Licence. Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 08, 2026
Seasonal
Randstad are working with a leading UK Facilities Management provider who is seeking an experienced Hard Services Manager to join their estates team. This role is focused on delivering high-quality, best-value maintenance services while driving a sustainable approach to estates management and providing technical leadership to a multi-discipline team. Package Competitive rate between 30 - 35 per hour (depending on experience) Working Hours: 9am - 5pm, 40 hours per week Schedule: Monday to Friday Position Type: Temporary with opportunity for permanent Duties Maintains full ownership of Building and Asset Maintenance KPIs to ensure all service levels are met and contract penalties are avoided. Leads a multi-discipline team of maintenance engineers and provides the technical guidance needed to resolve complex plant faults. Manages specialist supply chain partners, including market-testing for best value and ensuring work meets quality and cost standards. Coordinates unplanned work and remedial actions rapidly to ensure zero disruption to core operations. Works with the planning team to optimise the CAFM system and schedule preventative maintenance to reduce long-term asset failure. Supports the development of annual budgets and identifies site efficiencies to directly improve contract margins. Authors Risk Assessments and Method Statements for all site works to ensure staff operate safely in high-risk environments. Acts as the engineering lead for the designated area, ensuring all maintained assets have compliant evidence of completion. Operates safe working practices with due regard to Health and Safety Regulations, COSHH, and legislative requirements. Maintains detailed asset histories, maintenance records, and helpdesk reports to inform necessary follow-up actions. Supports the management of systems and processes in line with quality assurance policies to encourage continual improvement. Qualifications: Relevant trade qualification (Mechanical or Electrical). Proven experience managing a multi-disciplined hard FM team. Strong awareness of statutory requirements and technical compliance. Excellent communication and leadership skills. Proficiency in operating IT systems, specifically CAFM software. Experience in budget management, trend identification, and driving cost-effective practices. Full UK Driving Licence. Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Quantity Surveyor Bristol Up to £70,000 Car / Allowance The Company: Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment from executive to operative level. With offices in London, Manchester, and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a social housing maintenance company, who are looking for a Quantity Surveyor based in Bristol The Quantity Surveyor will be working with maintenance & refurbishment programmes working on full end to end life cycle of a project including sub contractor procurement, mobilisation and tendoring. This role requires the applicants to have strong NEC experience. Duties of the Quantity Surveyor: Monitor the contract progress, assess, and report any changes that may affect project costs and or time scale. Liaise with Contract Managers to establish the project specification and requirements. Value and authorise payments to sub-contractors. Assist in the control of contract budgets. Prepare and monitor cash flow forecast for designated projects. Prepare and submit monthly applications for payment to the Client/Client s representative. Prepare monthly valuation reports Experience required for the Quantity Surveyor role: Proven experience as a QS/ SQS within the planned refurbishment and construction sector Expert IT skills with proficient MS office skills Full UK Driving Licence NEC experience Design programmes experience If you would like to apply for the Quantity Surveyor role, apply online now or contact Chelsie at build recruitment on (phone number removed) / (url removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
May 08, 2026
Full time
Quantity Surveyor Bristol Up to £70,000 Car / Allowance The Company: Build Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the built environment from executive to operative level. With offices in London, Manchester, and the Southwest, we specialise in Housing, Construction, Facilities Management, Property, Surveying, Health & Safety and Sales. We supply candidates from executive to operative level, and are currently working with a social housing maintenance company, who are looking for a Quantity Surveyor based in Bristol The Quantity Surveyor will be working with maintenance & refurbishment programmes working on full end to end life cycle of a project including sub contractor procurement, mobilisation and tendoring. This role requires the applicants to have strong NEC experience. Duties of the Quantity Surveyor: Monitor the contract progress, assess, and report any changes that may affect project costs and or time scale. Liaise with Contract Managers to establish the project specification and requirements. Value and authorise payments to sub-contractors. Assist in the control of contract budgets. Prepare and monitor cash flow forecast for designated projects. Prepare and submit monthly applications for payment to the Client/Client s representative. Prepare monthly valuation reports Experience required for the Quantity Surveyor role: Proven experience as a QS/ SQS within the planned refurbishment and construction sector Expert IT skills with proficient MS office skills Full UK Driving Licence NEC experience Design programmes experience If you would like to apply for the Quantity Surveyor role, apply online now or contact Chelsie at build recruitment on (phone number removed) / (url removed) We'll take the time to understand your career history and motivations for a new role. We'll also take references and may ask for proof of eligibility to work in the UK. We work with a wide variety of clients in the public and private sector, and we will work with you to identify clients in which your skills, experience and personality will fit. Once we submit you for a role you will receive support and regular communication throughout the interview process. From there our commitment to you is all about being your career partner. We'll identify suitable jobs, provide support, and career guidance and even provide regular salary benchmarking. Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
LOCATION: London Fire Brigade SHIFT PATTERN: Monday to Friday, 40 hours per week SALARY: Competitive ROLE OVERVIEW AND PURPOSE You will be utilising your core skills asanMobileengineerdoing PPM andreactive fault diagnostics and installations associated to this company's coreactivities. Responsible for own Health & Safety on site and follow Method Statements and Risk Assessments as standard on all sites, highlighting specific requirements asrequired. Conduct the planned delivery of SFG 20 maintenance and repair across 51 fire stations in London. You will also be sufficient in conducting maintenance and repairs of the remedials you identify on PPM. You will be part of a wider team and will adopt a teamwork mentality and collaboration. Some but not all your PPM duties will be generator load testing, monthly emergency light testing, L8 temperature checks, meter readings, shower outlet descales, extract fans, pumps, lighting and general Mechanical, Electrical and Plumbing maintenance. You will be a first response on reactive calls and will be expected to attempt a first-time fix (within your skills competency). You will assist with the completion of standard maintenance and repair within the Mechanical, Electrical & Building Fabric trades. KEY RESPONSIBILITIES Conduct planned maintenance across LFB estate to SFG 20 standard. Complete engineer's worksheet in full, giving full details of plant that requires additional work. Work sheets to be detailed, pictures of before and after on each job, remedial quotations should be sourced and provided with the job. Complete works competently to prevent call backs and KPI failures. Identifying lifecycle replacement requirements. Complete a weekly time sheet correctly and submit it to your line manager. Submit expenses weekly with all supporting receipts. Complete all necessary paperwork for the customer whilst on site and obtain a customer's signature to enable the job attended to be invoiced without any delays. ESSENTIAL SKILLS & EXPERIENCE Planned maintenance competence to SFG 20. Emergency lighting fundamentals unit 1 & 2. Generator Load testing. L8 awareness. Trade qualifications (Plumbing, Mechanical or Electrical equivalent). L8 Awareness. IPAF, PASMA. DESIRABLE BUT NOT ESSENTIAL City & Guilds 236/0 & 2330 Electrical Installation/Maintenance or equivalent. 18th Edition IEE. Fabric experience in one or all of these - Tiling, carpentry, painting and plastering. Benefits 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home. Mental Health support and Life Event Counseling. Get Fit Programme. Financial and legal support. Cycle to work scheme. Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers. Life: Search for resources and tools on topics ranging from family and life to health, money and work. Support: Online chat or telephone service for urgent support in a crisis. ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
May 08, 2026
Full time
LOCATION: London Fire Brigade SHIFT PATTERN: Monday to Friday, 40 hours per week SALARY: Competitive ROLE OVERVIEW AND PURPOSE You will be utilising your core skills asanMobileengineerdoing PPM andreactive fault diagnostics and installations associated to this company's coreactivities. Responsible for own Health & Safety on site and follow Method Statements and Risk Assessments as standard on all sites, highlighting specific requirements asrequired. Conduct the planned delivery of SFG 20 maintenance and repair across 51 fire stations in London. You will also be sufficient in conducting maintenance and repairs of the remedials you identify on PPM. You will be part of a wider team and will adopt a teamwork mentality and collaboration. Some but not all your PPM duties will be generator load testing, monthly emergency light testing, L8 temperature checks, meter readings, shower outlet descales, extract fans, pumps, lighting and general Mechanical, Electrical and Plumbing maintenance. You will be a first response on reactive calls and will be expected to attempt a first-time fix (within your skills competency). You will assist with the completion of standard maintenance and repair within the Mechanical, Electrical & Building Fabric trades. KEY RESPONSIBILITIES Conduct planned maintenance across LFB estate to SFG 20 standard. Complete engineer's worksheet in full, giving full details of plant that requires additional work. Work sheets to be detailed, pictures of before and after on each job, remedial quotations should be sourced and provided with the job. Complete works competently to prevent call backs and KPI failures. Identifying lifecycle replacement requirements. Complete a weekly time sheet correctly and submit it to your line manager. Submit expenses weekly with all supporting receipts. Complete all necessary paperwork for the customer whilst on site and obtain a customer's signature to enable the job attended to be invoiced without any delays. ESSENTIAL SKILLS & EXPERIENCE Planned maintenance competence to SFG 20. Emergency lighting fundamentals unit 1 & 2. Generator Load testing. L8 awareness. Trade qualifications (Plumbing, Mechanical or Electrical equivalent). L8 Awareness. IPAF, PASMA. DESIRABLE BUT NOT ESSENTIAL City & Guilds 236/0 & 2330 Electrical Installation/Maintenance or equivalent. 18th Edition IEE. Fabric experience in one or all of these - Tiling, carpentry, painting and plastering. Benefits 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home. Mental Health support and Life Event Counseling. Get Fit Programme. Financial and legal support. Cycle to work scheme. Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers. Life: Search for resources and tools on topics ranging from family and life to health, money and work. Support: Online chat or telephone service for urgent support in a crisis. ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
I am currently recruiting for a Clerk of Works on a permanant basis to support the delivery of high-quality, compliant new build, major repairs, and planned maintenance projects across a housing portfolio. Role Reporting to the Asset Manager, you will carry out site inspections to ensure works meet contract specifications, quality standards, and health & safety requirements. You'll monitor contractor performance, attend site meetings, manage defects, and maintain accurate records and reports. The role also involves supporting asset surveys, ensuring compliance with SHQS/EESSH standards, and contributing to successful project delivery and handovers. About You HNC (or equivalent) in construction/civil engineering Experience in a Clerk of Works or similar inspection role across construction or maintenance projects Strong knowledge of building standards, construction methods, and H&S legislation (including CDM 2015) Experience supervising contractors and ensuring quality compliance Good IT, organisation, and communication skills Customer-focused with strong attention to detail Full UK driving licence and access to a vehicle Desirable: ICWCI membership, SMSTS/CSCS, and social housing experience Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.
May 08, 2026
Full time
I am currently recruiting for a Clerk of Works on a permanant basis to support the delivery of high-quality, compliant new build, major repairs, and planned maintenance projects across a housing portfolio. Role Reporting to the Asset Manager, you will carry out site inspections to ensure works meet contract specifications, quality standards, and health & safety requirements. You'll monitor contractor performance, attend site meetings, manage defects, and maintain accurate records and reports. The role also involves supporting asset surveys, ensuring compliance with SHQS/EESSH standards, and contributing to successful project delivery and handovers. About You HNC (or equivalent) in construction/civil engineering Experience in a Clerk of Works or similar inspection role across construction or maintenance projects Strong knowledge of building standards, construction methods, and H&S legislation (including CDM 2015) Experience supervising contractors and ensuring quality compliance Good IT, organisation, and communication skills Customer-focused with strong attention to detail Full UK driving licence and access to a vehicle Desirable: ICWCI membership, SMSTS/CSCS, and social housing experience Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.
Commercial Manager (Retrofit Division) 85,000 + 8,500 car allowance Flexible location (Cardiff head office attendance required) We are currently partnering with a leading maintenance contractor who are experiencing strong growth within their Retrofit Division, delivering planned maintenance and energy efficiency works to a portfolio of Housing Association clients. As a result of this expansion, they are seeking an experienced Commercial Manager to take ownership of commercial performance and lead a small QS team. The Opportunity This is a key strategic hire within a growing division. The successful candidate will oversee all commercial activity across retrofit and refurbishment works, ensuring strong cost control, margin improvement, and consistent commercial governance across multiple Housing Association frameworks. You will also be responsible for managing and developing a small team of Quantity Surveyors, providing leadership, structure, and commercial direction as the division continues to scale. Key Responsibilities Lead the commercial function across the Retrofit Division Manage, mentor, and develop a small team of QSs Oversee valuations, variations, cost reporting, and final accounts Ensure robust commercial controls across Housing Association contracts Drive margin improvement and identify commercial efficiencies Support procurement and subcontractor management strategies Provide accurate forecasting and reporting to senior leadership Work closely with operational teams to support project delivery Attend regular meetings at Head Office in Cardiff Candidate Requirements Proven background in a senior commercial role within construction, maintenance, or refurbishment Strong experience working with Housing Associations or similar public sector frameworks Retrofit / planned maintenance experience highly desirable Demonstrable leadership experience managing QS teams Strong commercial acumen with a track record of improving project performance Excellent communication and stakeholder management skills Degree-qualified in Quantity Surveying or equivalent experience Package & Benefits 85,000 basic salary 8,500 car allowance Flexible working location (with travel to Cardiff Head Office as required) Opportunity to join a rapidly growing division with strong career progression prospects Senior leadership exposure and influence over commercial strategy Overview This is an excellent opportunity for a commercially strong leader who wants to step into a growing division with real autonomy and influence. The business offers stability through established Housing Association frameworks, combined with the excitement of a scaling retrofit operation. If you would like further details or wish to discuss this role confidentially, please get in touch with Ellie on (phone number removed)
May 08, 2026
Full time
Commercial Manager (Retrofit Division) 85,000 + 8,500 car allowance Flexible location (Cardiff head office attendance required) We are currently partnering with a leading maintenance contractor who are experiencing strong growth within their Retrofit Division, delivering planned maintenance and energy efficiency works to a portfolio of Housing Association clients. As a result of this expansion, they are seeking an experienced Commercial Manager to take ownership of commercial performance and lead a small QS team. The Opportunity This is a key strategic hire within a growing division. The successful candidate will oversee all commercial activity across retrofit and refurbishment works, ensuring strong cost control, margin improvement, and consistent commercial governance across multiple Housing Association frameworks. You will also be responsible for managing and developing a small team of Quantity Surveyors, providing leadership, structure, and commercial direction as the division continues to scale. Key Responsibilities Lead the commercial function across the Retrofit Division Manage, mentor, and develop a small team of QSs Oversee valuations, variations, cost reporting, and final accounts Ensure robust commercial controls across Housing Association contracts Drive margin improvement and identify commercial efficiencies Support procurement and subcontractor management strategies Provide accurate forecasting and reporting to senior leadership Work closely with operational teams to support project delivery Attend regular meetings at Head Office in Cardiff Candidate Requirements Proven background in a senior commercial role within construction, maintenance, or refurbishment Strong experience working with Housing Associations or similar public sector frameworks Retrofit / planned maintenance experience highly desirable Demonstrable leadership experience managing QS teams Strong commercial acumen with a track record of improving project performance Excellent communication and stakeholder management skills Degree-qualified in Quantity Surveying or equivalent experience Package & Benefits 85,000 basic salary 8,500 car allowance Flexible working location (with travel to Cardiff Head Office as required) Opportunity to join a rapidly growing division with strong career progression prospects Senior leadership exposure and influence over commercial strategy Overview This is an excellent opportunity for a commercially strong leader who wants to step into a growing division with real autonomy and influence. The business offers stability through established Housing Association frameworks, combined with the excitement of a scaling retrofit operation. If you would like further details or wish to discuss this role confidentially, please get in touch with Ellie on (phone number removed)
.Commercial Assistant page is loaded Commercial Assistantlocations: Polypipe Doncaster Broomhouse Lanetime type: Full timeposted on: Posted 2 Days Agotime left to apply: End Date: May 18, 2026 (28 days left to apply)job requisition id: JR101962Closing Date for Application:Sunday 17/05/2026 Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products.Part of the Genuit Group, we combine long-term stability with a culture built on teamwork, accountability and continuous improvement. We encourage fresh ideas, invest in development and are committed to creating a safe, inclusive and supportive workplace where everyone feels like they belong. Role: Reporting to the Commercial Pricing Manager, the Commercial Assistant role is responsible for updating and maintaining special pricing agreements for all contractors and trade partners by inputting data into agreements. Alongside this the Commercial Assistant will ensure all pricing queries and manually pricing requests are completed within agreed SLA's. Key Responsibilities: Ensure all pricing queries are answered within agreed SLA's Ensure all orders are priced correctly when manual intervention is required Ensure all Special Pricing Agreements are maintained and updated as requested to Maintenance of discounts on IFS Ad Hoc and planned commercial reporting Contact for sales and internal departments for Commercial related queries Contact for external customer Commercial queries Adhoc project work and process improvement works Skills & Requirements: Experience in a fast paced commercial setting Good understanding of and knowledge of Excel and Data Inputting Prior experience in managing commercial agreements (desirable) Excellent communication skills Experience of developing process notes and documentation Working Hours & Benefits: Monday to Friday, 08:30 - 16: days holiday entitlement Contributory pension scheme - matched up to 8% Life assurance Enhanced Maternity & Paternity pay Save as you earn Sharesave Scheme Cycle to work scheme Free flu vouchers Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services Staff discount on all Genuit Group products Free on-site parkingHere at the Genuit Group we recognise and develop the contribution our people make to the Group's success and are committed to attracting talent from the widest pool. We have a role to play in making the built environment more sustainable, building a low carbon business ourselves as well as delivering sustainable solutions at scale.At Polypipe we recognise the contribution our people make to our success and are committed to attracting talent from a wide and diverse pool.Our people are the heart and soul of our business, and we know that they are the key to ensuring our long-term sustainability, enabling us to be flexible and responsive to the needs of our customers and the wider construction industry, and we offer rewarding career opportunities to individuals who share our values and are passionate about making a positive impact.And that is why we are passionate about developing a culture of trust and innovation, one that values and celebrates the contributions of each and every team member. It is our people who will ensure that our success is sustainable, supporting each other and being flexible and responsive to the demands of our customers and the marketplace.
May 08, 2026
Full time
.Commercial Assistant page is loaded Commercial Assistantlocations: Polypipe Doncaster Broomhouse Lanetime type: Full timeposted on: Posted 2 Days Agotime left to apply: End Date: May 18, 2026 (28 days left to apply)job requisition id: JR101962Closing Date for Application:Sunday 17/05/2026 Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products.Part of the Genuit Group, we combine long-term stability with a culture built on teamwork, accountability and continuous improvement. We encourage fresh ideas, invest in development and are committed to creating a safe, inclusive and supportive workplace where everyone feels like they belong. Role: Reporting to the Commercial Pricing Manager, the Commercial Assistant role is responsible for updating and maintaining special pricing agreements for all contractors and trade partners by inputting data into agreements. Alongside this the Commercial Assistant will ensure all pricing queries and manually pricing requests are completed within agreed SLA's. Key Responsibilities: Ensure all pricing queries are answered within agreed SLA's Ensure all orders are priced correctly when manual intervention is required Ensure all Special Pricing Agreements are maintained and updated as requested to Maintenance of discounts on IFS Ad Hoc and planned commercial reporting Contact for sales and internal departments for Commercial related queries Contact for external customer Commercial queries Adhoc project work and process improvement works Skills & Requirements: Experience in a fast paced commercial setting Good understanding of and knowledge of Excel and Data Inputting Prior experience in managing commercial agreements (desirable) Excellent communication skills Experience of developing process notes and documentation Working Hours & Benefits: Monday to Friday, 08:30 - 16: days holiday entitlement Contributory pension scheme - matched up to 8% Life assurance Enhanced Maternity & Paternity pay Save as you earn Sharesave Scheme Cycle to work scheme Free flu vouchers Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services Staff discount on all Genuit Group products Free on-site parkingHere at the Genuit Group we recognise and develop the contribution our people make to the Group's success and are committed to attracting talent from the widest pool. We have a role to play in making the built environment more sustainable, building a low carbon business ourselves as well as delivering sustainable solutions at scale.At Polypipe we recognise the contribution our people make to our success and are committed to attracting talent from a wide and diverse pool.Our people are the heart and soul of our business, and we know that they are the key to ensuring our long-term sustainability, enabling us to be flexible and responsive to the needs of our customers and the wider construction industry, and we offer rewarding career opportunities to individuals who share our values and are passionate about making a positive impact.And that is why we are passionate about developing a culture of trust and innovation, one that values and celebrates the contributions of each and every team member. It is our people who will ensure that our success is sustainable, supporting each other and being flexible and responsive to the demands of our customers and the marketplace.
Site Data Analyst Location: Greatham, Teesside Client: Tioxide Lead SAP PM and site data improvement at a major manufacturing site Tioxide is recruiting for a Site Data Analyst to join the Finance team at Greatham. This is a specialist systems and data role where you will act as the Business Process Owner for the site s Enterprise Asset Management and SAP PM system, supporting IT infrastructure for plant maintenance and helping drive continuous improvement across maintenance systems and processes. You will also support the development of key site systems including the Factory Information System, PI Vision and web-based intelligent interfaces. Working with SAP users, site teams, external suppliers and senior stakeholders, you will provide first-line support, technical guidance, coaching and data-led insight to help improve maintenance performance and business decision-making. What you ll be doing You will: Act as Business Process Owner for SAP PM / Enterprise Asset Management and supporting maintenance systems. Lead continuous improvement of site maintenance systems strategy, including SAP PM and related software. Support and coach a user community of around 100 SAP users. Educate and influence manufacturing teams in the use of SAP and web-based intelligent interfaces. Provide technical support, guidance and solutions to resolve SAP and maintenance system issues. Improve use of SAP Planned Maintenance functionality to support maintenance and reliability processes. Ensure common working practices for master data management across plant areas. Plan and prioritise master data maintenance to support statutory, maintenance and CAPEX programmes. Manage SAP role allocation, ensuring users have appropriate access, training and support. Develop automated reports aligned to business goals for site leadership, engineering managers and other stakeholders. Lead liaison with external suppliers to deliver computer-aided engineering solutions. Manage and develop the site s Aveva PI Vision Factory Information System to support safety, quality, cost and production performance. Promote a positive, values-led culture focused on collaboration, improvement and high standards. Candidate requirements We welcome applications from people who have: HNC, or equivalent knowledge, in an engineering discipline such as mechanical, electrical, chemical or a related subject. Experience delivering SAP Plant Maintenance or Enterprise Asset Management solutions. Experience in asset management, maintenance systems, capital project execution or manufacturing systems. Strong knowledge of SAP PM and maintenance performance metrics such as OEE, MTBF and MTTR. Good IT and data skills, including Excel, PI/FIS or similar systems. Experience developing performance reports, tools or automated reporting. The ability to simplify complex issues and turn data into practical insight. Strong written, verbal communication and facilitation skills. Confidence supporting users, coaching others and working with a wide range of stakeholders. A proactive, curious and continuous improvement mindset. We know people gain skills in different ways. You do not need to meet every point above to apply. If this role interests you and you believe you could make a positive contribution, we would welcome your application. Why join Tioxide? Join Tioxide in a role where your SAP PM, systems and data expertise will directly support maintenance performance, reliability, safety and operational decision-making. You will help shape how site teams use systems, data and reporting to improve performance across a major Teesside manufacturing site. Diversity and inclusion Tioxide is committed to building a diverse and inclusive workplace where everyone feels respected, valued and able to contribute. We welcome applications from people of all backgrounds, identities and experiences, including people from groups currently under-represented in manufacturing, data, systems, finance and technical roles. Tioxide and Wolviston Management Services are happy to discuss reasonable adjustments at any stage of the recruitment process.
May 08, 2026
Full time
Site Data Analyst Location: Greatham, Teesside Client: Tioxide Lead SAP PM and site data improvement at a major manufacturing site Tioxide is recruiting for a Site Data Analyst to join the Finance team at Greatham. This is a specialist systems and data role where you will act as the Business Process Owner for the site s Enterprise Asset Management and SAP PM system, supporting IT infrastructure for plant maintenance and helping drive continuous improvement across maintenance systems and processes. You will also support the development of key site systems including the Factory Information System, PI Vision and web-based intelligent interfaces. Working with SAP users, site teams, external suppliers and senior stakeholders, you will provide first-line support, technical guidance, coaching and data-led insight to help improve maintenance performance and business decision-making. What you ll be doing You will: Act as Business Process Owner for SAP PM / Enterprise Asset Management and supporting maintenance systems. Lead continuous improvement of site maintenance systems strategy, including SAP PM and related software. Support and coach a user community of around 100 SAP users. Educate and influence manufacturing teams in the use of SAP and web-based intelligent interfaces. Provide technical support, guidance and solutions to resolve SAP and maintenance system issues. Improve use of SAP Planned Maintenance functionality to support maintenance and reliability processes. Ensure common working practices for master data management across plant areas. Plan and prioritise master data maintenance to support statutory, maintenance and CAPEX programmes. Manage SAP role allocation, ensuring users have appropriate access, training and support. Develop automated reports aligned to business goals for site leadership, engineering managers and other stakeholders. Lead liaison with external suppliers to deliver computer-aided engineering solutions. Manage and develop the site s Aveva PI Vision Factory Information System to support safety, quality, cost and production performance. Promote a positive, values-led culture focused on collaboration, improvement and high standards. Candidate requirements We welcome applications from people who have: HNC, or equivalent knowledge, in an engineering discipline such as mechanical, electrical, chemical or a related subject. Experience delivering SAP Plant Maintenance or Enterprise Asset Management solutions. Experience in asset management, maintenance systems, capital project execution or manufacturing systems. Strong knowledge of SAP PM and maintenance performance metrics such as OEE, MTBF and MTTR. Good IT and data skills, including Excel, PI/FIS or similar systems. Experience developing performance reports, tools or automated reporting. The ability to simplify complex issues and turn data into practical insight. Strong written, verbal communication and facilitation skills. Confidence supporting users, coaching others and working with a wide range of stakeholders. A proactive, curious and continuous improvement mindset. We know people gain skills in different ways. You do not need to meet every point above to apply. If this role interests you and you believe you could make a positive contribution, we would welcome your application. Why join Tioxide? Join Tioxide in a role where your SAP PM, systems and data expertise will directly support maintenance performance, reliability, safety and operational decision-making. You will help shape how site teams use systems, data and reporting to improve performance across a major Teesside manufacturing site. Diversity and inclusion Tioxide is committed to building a diverse and inclusive workplace where everyone feels respected, valued and able to contribute. We welcome applications from people of all backgrounds, identities and experiences, including people from groups currently under-represented in manufacturing, data, systems, finance and technical roles. Tioxide and Wolviston Management Services are happy to discuss reasonable adjustments at any stage of the recruitment process.
Assistant Facilities Manager Near Bury St Edmunds (Office based) 12-month fixed term contract (Immediate start) Full-time, Monday to Friday From £31,519 per annum Purpose of this role To assist in leading the facilities team, who are responsible for the maintenance of buildings, associated equipment and services on a day-to-day basis. This role will be a key liaison for site services and manage the external contractors and sub-contractors, applying health, safety, environmental and quality standards as required. Your key responsibilities are: Assist in overseeing the facilities team who are responsible for the maintenance of buildings and associated equipment and services Respond to, escalate, record, and complete planned and reactive maintenance tasks Be a key liaison for site services and manage the external contractors and sub-contractors, applying health, safety, environment and quality standards Complete and stay current with all required SHEQ training and risk reporting Be proactive in highlighting and driving preventive measures and controls Assist the Group Facilities Manager to plan and coordinate all premises-based works activities, identify process improvements, review environmental targets and recommend cost saving opportunities Arrange for regular maintenance of equipment and internal systems (e.g. heating system, fire & intruder alarms) Maintain an updated record of maintenance of equipment and internal system and document processes Assist the Group Facilities Manager with longer term/larger scale projects such as office moves/ relocations and or significant refurbishment works Visit other premises as and when required to monitor/ review ongoing facilities activities Covering main Head Office reception and reception duties when required Any other duties as required by the business Provide general administrative support Experience/Knowledge: Previous facilities maintenance experience or equivalent Experience completing site inductions, Method Statements, Risk Assessments Experience of leading a team and projects Abilities/Skills: Be adaptable to any situation in a calm and collected manner Strong understanding of Microsoft Office & Excel Desirable: Basic health and safety knowledge PowerPoint
May 08, 2026
Full time
Assistant Facilities Manager Near Bury St Edmunds (Office based) 12-month fixed term contract (Immediate start) Full-time, Monday to Friday From £31,519 per annum Purpose of this role To assist in leading the facilities team, who are responsible for the maintenance of buildings, associated equipment and services on a day-to-day basis. This role will be a key liaison for site services and manage the external contractors and sub-contractors, applying health, safety, environmental and quality standards as required. Your key responsibilities are: Assist in overseeing the facilities team who are responsible for the maintenance of buildings and associated equipment and services Respond to, escalate, record, and complete planned and reactive maintenance tasks Be a key liaison for site services and manage the external contractors and sub-contractors, applying health, safety, environment and quality standards Complete and stay current with all required SHEQ training and risk reporting Be proactive in highlighting and driving preventive measures and controls Assist the Group Facilities Manager to plan and coordinate all premises-based works activities, identify process improvements, review environmental targets and recommend cost saving opportunities Arrange for regular maintenance of equipment and internal systems (e.g. heating system, fire & intruder alarms) Maintain an updated record of maintenance of equipment and internal system and document processes Assist the Group Facilities Manager with longer term/larger scale projects such as office moves/ relocations and or significant refurbishment works Visit other premises as and when required to monitor/ review ongoing facilities activities Covering main Head Office reception and reception duties when required Any other duties as required by the business Provide general administrative support Experience/Knowledge: Previous facilities maintenance experience or equivalent Experience completing site inductions, Method Statements, Risk Assessments Experience of leading a team and projects Abilities/Skills: Be adaptable to any situation in a calm and collected manner Strong understanding of Microsoft Office & Excel Desirable: Basic health and safety knowledge PowerPoint
