Quality Assurance Technician Knowsley 14.61 - 15.31 per hour Rotating shifts 12-month maternity cover Immediate start available Introduction Acorn by Synergie is currently recruiting for a Quality Assurance Technician to join their client in Knowsley on an initial 12-month maternity cover contract. The company supplies high-quality beef and vegetarian substitutes worldwide and offers excellent working conditions, progression opportunities, and potential permanent contracts. Key Duties: Operate safely and efficiently at all times. Complete QA and QC documentation accurately. Carry out raw material checks and calibration checks. Conduct finished product inspections and metal detection procedures. Prepare lab samples and complete traceability audits. Monitor product and packaging integrity. Ensure compliance with operational CCPs. Report quality issues to management promptly. Maintain temperature controls throughout production. Follow standard operating procedures and GMP standards. Support continuous improvement initiatives. Maintain high standards of housekeeping and attention to detail. Requirements: Previous experience in a similar QA or food production role. Computer literate. Positive and proactive attitude. Honest and reliable approach to work. Strong teamwork skills. Good attention to detail. What We Offer: Weekly pay. Accrued holiday pay. Pension contributions. Dedicated Account Manager support. Friendly modern working environment. Paid breaks. Full training provided. Opportunities for progression and permanent contracts. Shift Pattern: 5am - 1pm. 7am - 3pm. 11am - 7pm. 3pm - 11pm. Interested? Apply now to secure your opportunity with an immediate start available. Acorn by Synergie acts as an employment business for the supply of temporary workers.
May 14, 2026
Seasonal
Quality Assurance Technician Knowsley 14.61 - 15.31 per hour Rotating shifts 12-month maternity cover Immediate start available Introduction Acorn by Synergie is currently recruiting for a Quality Assurance Technician to join their client in Knowsley on an initial 12-month maternity cover contract. The company supplies high-quality beef and vegetarian substitutes worldwide and offers excellent working conditions, progression opportunities, and potential permanent contracts. Key Duties: Operate safely and efficiently at all times. Complete QA and QC documentation accurately. Carry out raw material checks and calibration checks. Conduct finished product inspections and metal detection procedures. Prepare lab samples and complete traceability audits. Monitor product and packaging integrity. Ensure compliance with operational CCPs. Report quality issues to management promptly. Maintain temperature controls throughout production. Follow standard operating procedures and GMP standards. Support continuous improvement initiatives. Maintain high standards of housekeeping and attention to detail. Requirements: Previous experience in a similar QA or food production role. Computer literate. Positive and proactive attitude. Honest and reliable approach to work. Strong teamwork skills. Good attention to detail. What We Offer: Weekly pay. Accrued holiday pay. Pension contributions. Dedicated Account Manager support. Friendly modern working environment. Paid breaks. Full training provided. Opportunities for progression and permanent contracts. Shift Pattern: 5am - 1pm. 7am - 3pm. 11am - 7pm. 3pm - 11pm. Interested? Apply now to secure your opportunity with an immediate start available. Acorn by Synergie acts as an employment business for the supply of temporary workers.
Yolk Recruitment is actively working with a renowned company based in South Wales to find a highly skilled Shift Mechanical Supervisor . This is a fantastic opportunity to join a dynamic team and make a significant impact on their Engineering function. As the Mechanical Shift Leader, you will report directly to the Engineering Manager leading the maintenance activities on shift. Our client is a highly reputable manufacturing company based in South Wales. With a strong presence in the industry, they have established themselves as a leader in delivering high-quality products to their customers. The company is committed to excellence in every aspect of their operations, from safety and customer satisfaction to innovation and continuous improvement. A culture of excellence and teamwork prevails. They foster an environment that encourages collaboration, open communication, and personal growth. The team members are passionate about their work and dedicated to meeting and exceeding customer expectations. With a focus on integrity, accountability, and professionalism, the company's values are ingrained in every aspect of their operations. This forward-thinking company places a strong emphasis on innovation and modern manufacturing practices. They embrace technological advancements and continuously seek opportunities to enhance their processes and products. The team is encouraged to think creatively, challenge the status quo, and contribute ideas that drive continuous improvement. Through the implementation of Lean Principles and data-driven decision-making, they are constantly evolving to stay ahead in the industry. The company recognises that its employees are its greatest asset. They invest in the personal and professional development of their team members through training, mentorship, and growth opportunities. A supportive work environment promotes work-life balance, employee well-being, and a positive atmosphere. The company believes in recognising and rewarding achievements, fostering a culture of appreciation, and empowering employees to reach their full potential. Key Responsibilities: Supervise and lead a team of maintenance technicians in carrying out preventive and corrective maintenance on production equipment. Perform troubleshooting and diagnosis of mechanical issues to ensure optimal performance of equipment. Develop and implement maintenance strategies to maximise equipment uptime and minimise downtime. Ensure compliance with health and safety regulations and promote a safe working environment. Manage maintenance inventory and ensure adequate stock levels of spare parts and equipment. Key Skills: Experience in an Engineering supervisor or leadership role within a manufacturing environment. Previous experience of CMMS systems. Strong analytical and problem-solving skills. Ability to prioritise and manage multiple tasks effectively. Excellent communication and interpersonal skills. A minimum of a Level 3 in mechanical Engineering If you are looking for a great place to work with salary of circa £38,000 and enhanced benefits as well as opportunities for training and development then get in contact with Andy Jones. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities
May 14, 2026
Full time
Yolk Recruitment is actively working with a renowned company based in South Wales to find a highly skilled Shift Mechanical Supervisor . This is a fantastic opportunity to join a dynamic team and make a significant impact on their Engineering function. As the Mechanical Shift Leader, you will report directly to the Engineering Manager leading the maintenance activities on shift. Our client is a highly reputable manufacturing company based in South Wales. With a strong presence in the industry, they have established themselves as a leader in delivering high-quality products to their customers. The company is committed to excellence in every aspect of their operations, from safety and customer satisfaction to innovation and continuous improvement. A culture of excellence and teamwork prevails. They foster an environment that encourages collaboration, open communication, and personal growth. The team members are passionate about their work and dedicated to meeting and exceeding customer expectations. With a focus on integrity, accountability, and professionalism, the company's values are ingrained in every aspect of their operations. This forward-thinking company places a strong emphasis on innovation and modern manufacturing practices. They embrace technological advancements and continuously seek opportunities to enhance their processes and products. The team is encouraged to think creatively, challenge the status quo, and contribute ideas that drive continuous improvement. Through the implementation of Lean Principles and data-driven decision-making, they are constantly evolving to stay ahead in the industry. The company recognises that its employees are its greatest asset. They invest in the personal and professional development of their team members through training, mentorship, and growth opportunities. A supportive work environment promotes work-life balance, employee well-being, and a positive atmosphere. The company believes in recognising and rewarding achievements, fostering a culture of appreciation, and empowering employees to reach their full potential. Key Responsibilities: Supervise and lead a team of maintenance technicians in carrying out preventive and corrective maintenance on production equipment. Perform troubleshooting and diagnosis of mechanical issues to ensure optimal performance of equipment. Develop and implement maintenance strategies to maximise equipment uptime and minimise downtime. Ensure compliance with health and safety regulations and promote a safe working environment. Manage maintenance inventory and ensure adequate stock levels of spare parts and equipment. Key Skills: Experience in an Engineering supervisor or leadership role within a manufacturing environment. Previous experience of CMMS systems. Strong analytical and problem-solving skills. Ability to prioritise and manage multiple tasks effectively. Excellent communication and interpersonal skills. A minimum of a Level 3 in mechanical Engineering If you are looking for a great place to work with salary of circa £38,000 and enhanced benefits as well as opportunities for training and development then get in contact with Andy Jones. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities
Site Hygiene Manager - site in the Scarborough area, managing a team of 15 Monday - Friday day time hours, no shifts Responsible for ensuring the highest standards of hygiene and food safety are maintained across the site environment. This is a critical role in the team - protecting product integrity, maintaining a clean production environment, and supporting operations click apply for full job details
May 14, 2026
Full time
Site Hygiene Manager - site in the Scarborough area, managing a team of 15 Monday - Friday day time hours, no shifts Responsible for ensuring the highest standards of hygiene and food safety are maintained across the site environment. This is a critical role in the team - protecting product integrity, maintaining a clean production environment, and supporting operations click apply for full job details
Solution Director; Analytics, AI/ML page is loaded Solution Director; Analytics, AI/MLlocations: UK-Hayes-Hyde Park Hayestime type: Full timeposted on: Posted 26 Days Agojob requisition id: R-23123We are seeking a highly accomplished Solution Director (Analytics & Al/ML) to lead the design and sales of two critical solution portfolios: Generative AI/LLM solutions and Data modernization/Lakehouse architectures on AWS.This pivotal role requires mastery of both domains - leveraging generative AI capabilities (Amazon Q, Amazon Bedrock, QuickSight) to drive executive conversations and opportunity creation, while delivering enterprise data modernization through Lakehouse architectures using AWS native services (Glue, SageMaker Unified Studio) and leading platforms (Databricks on AWS, Snowflake on AWS).This is a presales role that demands cross-functional experience with proven ability to engage C-level stakeholders, drive top-of-funnel opportunity creation, and maintain comprehensive account ownership across the entire customer lifecycle.The ideal candidate will excel at both selling the vision of generative AI transformation and delivering the reality of enterprise data modernization, combining deep technical expertise with exceptional business acumen and executive presence. Responsibilities Strategic Leadership & Opportunity Development • Drive top-of-funnel opportunity creation through two parallel tracks: engaging C-level stakeholders with generative AI demonstrations (Amazon Q, Amazon Bedrock) and identifying data modernization needs for Lakehouse transformations.• Lead the design and architecture of dual solution portfolios; 1) Generative AI Solutions : Amazon Bedrock implementations, Amazon Q deployments, QuickSight with Q capabilities, RAG architectures, and custom LLM solutions, and 2) Data Modernization : Enterprise Lakehouse architectures using AWS Glue, SageMaker Unified Studio, Databricks on AWS, and Snowflake on AWS.• Act as the trusted advisor, positioning generative AI as the transformational vision while grounding delivery in robust data platform modernization.• Develop compelling business cases that connect AI aspirations with practical data foundation requirements, demonstrating ROI across both portfolios.• Stay current with advancements in generative AI (foundation models, LLMs) and modern data architectures (Lakehouse patterns, data mesh, unified analytics).• Contribute to Rackspace's intellectual property through reference architectures covering both generative AI implementations and Lakehouse design patterns.• Mentor and provide leadership to Solution Architects by guiding technical development and fostering skill growth across both generative AI and data modernization solution areas. Customer Engagement & Solution Delivery • Serve as the primary technical lead orchestrating both generative AI discussions and data modernization programs for strategic accounts.• Build strategic relationships using two engagement models; 1) Executive Level : Amazon Q demonstrations, QuickSight analytics with generative BI, art-of-the-possible sessions, and 2) Technical Level : Lakehouse architecture workshops, platform assessments (Databricks vs Snowflake vs AWS-native), migration planning.• Lead comprehensive consultative engagements that begin with generative AI vision (Amazon Q, Bedrock) and translate into concrete data modernization roadmaps.• Develop proposals that balance innovative AI capabilities with foundational data platform requirements.Guide customers through parallel journeys: generative AI adoption (POCs to production) and data platform modernization (legacy to Lakehouse).• Collaborate with sales teams to position both solution portfolios strategically based on customer maturity and needs. Technical Excellence & Market Awareness • Maintain deep expertise across both solution domains; 1) Generative AI : Amazon Bedrock, Amazon Q, QuickSight Q, SageMaker JumpStart, prompt engineering, RAG architectures, vector databases, and 2) Data Platforms : AWS Glue, SageMaker Unified Studio, Databricks on AWS, Snowflake on AWS, Redshift, EMR, Apache Iceberg, Delta Lake.• Position AWS solutions effectively against other cloud platforms' offerings in both generative AI (Azure OpenAI, Vertex AI) and data platforms (Azure Synapse, BigQuery)• Guide architectural decisions on build vs. buy for both Al capabilities and data platform componentsExperience Deep experience with generative AI technologies: Amazon Bedrock, Amazon Q, LLM architectures, RAG implementations. Proven track record delivering data modernization: Lakehouse architectures, Databricks and/or Snowflake implementations, AWS Glue/EMR deployments A bachelor's degree in computer science, Data Science, Engineering, Mathematics, or a related technical field is required. At the manager's discretion, additional relevant experience may substitute for the degree requirement. A minimum of 15 years of enterprise solution architecture experience. A minimum of 8 years of public cloud experience. A minimum of 5 years as a senior-level architect or solutions leader with hands-on experience in both AI/ML and data platform modernization. Proven Presales/Sales Engineering experience. Demonstrated success in engaging C-level executives using generative AI demonstrations while delivering complex data platform transformations. Strong understanding across the full spectrum: AI/ML: Generative AI, foundation models, LLMs, traditional ML, prompt engineering, fine-tuning. Data Platforms: Lakehouse architectures, data mesh, ETL/ELT, streaming, data governance, data quality. Proficiency in Python, SQL, and Spark with hands-on experience in: Generative AI: LangChain, vector databases, embedding models. Data Engineering: PySpark, Apache Iceberg/Delta Lake, orchestration tools. A proven ability to articulate both visionary AI possibilities and practical data platform requirements to diverse audiences. About Rackspace Technology We are the multicloud solutions experts. We combine our expertise with the world's leading technologies - across applications, data and security - to deliver end-to-end solutions. We have a proven record of advising customers based on their business challenges, designing solutions that scale, building and managing those solutions, and optimizing returns into the future. Named a best place to work, year after year according to Fortune, Forbes and Glassdoor, we attract and develop world-class talent. Join us on our mission to embrace technology, empower customers and deliver the future. More on Rackspace Technology Though we're all different, Rackers thrive through our connection to a central goal: to be a valued member of a winning team on an inspiring mission. We bring our whole selves to work every day. And we embrace the notion that unique perspectives fuel innovation and enable us to best serve our customers and communities around the globe. We welcome you to apply today and want you to know that we are committed to offering equal employment opportunity without regard to age, color, disability, gender reassignment or identity or expression, genetic information, marital or civil partner status, pregnancy or maternity status, military or veteran status, nationality, ethnic or national origin, race, religion or belief, sexual orientation, or any legally protected characteristic. If you have a disability or special need that requires accommodation, please let us know.
May 14, 2026
Full time
Solution Director; Analytics, AI/ML page is loaded Solution Director; Analytics, AI/MLlocations: UK-Hayes-Hyde Park Hayestime type: Full timeposted on: Posted 26 Days Agojob requisition id: R-23123We are seeking a highly accomplished Solution Director (Analytics & Al/ML) to lead the design and sales of two critical solution portfolios: Generative AI/LLM solutions and Data modernization/Lakehouse architectures on AWS.This pivotal role requires mastery of both domains - leveraging generative AI capabilities (Amazon Q, Amazon Bedrock, QuickSight) to drive executive conversations and opportunity creation, while delivering enterprise data modernization through Lakehouse architectures using AWS native services (Glue, SageMaker Unified Studio) and leading platforms (Databricks on AWS, Snowflake on AWS).This is a presales role that demands cross-functional experience with proven ability to engage C-level stakeholders, drive top-of-funnel opportunity creation, and maintain comprehensive account ownership across the entire customer lifecycle.The ideal candidate will excel at both selling the vision of generative AI transformation and delivering the reality of enterprise data modernization, combining deep technical expertise with exceptional business acumen and executive presence. Responsibilities Strategic Leadership & Opportunity Development • Drive top-of-funnel opportunity creation through two parallel tracks: engaging C-level stakeholders with generative AI demonstrations (Amazon Q, Amazon Bedrock) and identifying data modernization needs for Lakehouse transformations.• Lead the design and architecture of dual solution portfolios; 1) Generative AI Solutions : Amazon Bedrock implementations, Amazon Q deployments, QuickSight with Q capabilities, RAG architectures, and custom LLM solutions, and 2) Data Modernization : Enterprise Lakehouse architectures using AWS Glue, SageMaker Unified Studio, Databricks on AWS, and Snowflake on AWS.• Act as the trusted advisor, positioning generative AI as the transformational vision while grounding delivery in robust data platform modernization.• Develop compelling business cases that connect AI aspirations with practical data foundation requirements, demonstrating ROI across both portfolios.• Stay current with advancements in generative AI (foundation models, LLMs) and modern data architectures (Lakehouse patterns, data mesh, unified analytics).• Contribute to Rackspace's intellectual property through reference architectures covering both generative AI implementations and Lakehouse design patterns.• Mentor and provide leadership to Solution Architects by guiding technical development and fostering skill growth across both generative AI and data modernization solution areas. Customer Engagement & Solution Delivery • Serve as the primary technical lead orchestrating both generative AI discussions and data modernization programs for strategic accounts.• Build strategic relationships using two engagement models; 1) Executive Level : Amazon Q demonstrations, QuickSight analytics with generative BI, art-of-the-possible sessions, and 2) Technical Level : Lakehouse architecture workshops, platform assessments (Databricks vs Snowflake vs AWS-native), migration planning.• Lead comprehensive consultative engagements that begin with generative AI vision (Amazon Q, Bedrock) and translate into concrete data modernization roadmaps.• Develop proposals that balance innovative AI capabilities with foundational data platform requirements.Guide customers through parallel journeys: generative AI adoption (POCs to production) and data platform modernization (legacy to Lakehouse).• Collaborate with sales teams to position both solution portfolios strategically based on customer maturity and needs. Technical Excellence & Market Awareness • Maintain deep expertise across both solution domains; 1) Generative AI : Amazon Bedrock, Amazon Q, QuickSight Q, SageMaker JumpStart, prompt engineering, RAG architectures, vector databases, and 2) Data Platforms : AWS Glue, SageMaker Unified Studio, Databricks on AWS, Snowflake on AWS, Redshift, EMR, Apache Iceberg, Delta Lake.• Position AWS solutions effectively against other cloud platforms' offerings in both generative AI (Azure OpenAI, Vertex AI) and data platforms (Azure Synapse, BigQuery)• Guide architectural decisions on build vs. buy for both Al capabilities and data platform componentsExperience Deep experience with generative AI technologies: Amazon Bedrock, Amazon Q, LLM architectures, RAG implementations. Proven track record delivering data modernization: Lakehouse architectures, Databricks and/or Snowflake implementations, AWS Glue/EMR deployments A bachelor's degree in computer science, Data Science, Engineering, Mathematics, or a related technical field is required. At the manager's discretion, additional relevant experience may substitute for the degree requirement. A minimum of 15 years of enterprise solution architecture experience. A minimum of 8 years of public cloud experience. A minimum of 5 years as a senior-level architect or solutions leader with hands-on experience in both AI/ML and data platform modernization. Proven Presales/Sales Engineering experience. Demonstrated success in engaging C-level executives using generative AI demonstrations while delivering complex data platform transformations. Strong understanding across the full spectrum: AI/ML: Generative AI, foundation models, LLMs, traditional ML, prompt engineering, fine-tuning. Data Platforms: Lakehouse architectures, data mesh, ETL/ELT, streaming, data governance, data quality. Proficiency in Python, SQL, and Spark with hands-on experience in: Generative AI: LangChain, vector databases, embedding models. Data Engineering: PySpark, Apache Iceberg/Delta Lake, orchestration tools. A proven ability to articulate both visionary AI possibilities and practical data platform requirements to diverse audiences. About Rackspace Technology We are the multicloud solutions experts. We combine our expertise with the world's leading technologies - across applications, data and security - to deliver end-to-end solutions. We have a proven record of advising customers based on their business challenges, designing solutions that scale, building and managing those solutions, and optimizing returns into the future. Named a best place to work, year after year according to Fortune, Forbes and Glassdoor, we attract and develop world-class talent. Join us on our mission to embrace technology, empower customers and deliver the future. More on Rackspace Technology Though we're all different, Rackers thrive through our connection to a central goal: to be a valued member of a winning team on an inspiring mission. We bring our whole selves to work every day. And we embrace the notion that unique perspectives fuel innovation and enable us to best serve our customers and communities around the globe. We welcome you to apply today and want you to know that we are committed to offering equal employment opportunity without regard to age, color, disability, gender reassignment or identity or expression, genetic information, marital or civil partner status, pregnancy or maternity status, military or veteran status, nationality, ethnic or national origin, race, religion or belief, sexual orientation, or any legally protected characteristic. If you have a disability or special need that requires accommodation, please let us know.
The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Production team as a Machine Setter at our Safran Seats site based in Cwmbran . In the UK, Safran Seats specialises solely in the First Class and Business Class seating markets for wide body aircraft, with industrial and engineering teams in Cwmbran and Newport, Wales and Brackley, England. Your role The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Key Responsibilities will include: -Download programs from the file server -Setup CNC tooling assemblies and maintain tool management system -Setup and run CNC machining centres -Prove out new NPI programs -Use Vernier's, thread gauges, plug gauges and other inspection equipment to monitor tolerance requirements as defined in the engineering data. -Perform daily / weekly maintenance tasks in accordance with machine centre maintenance plan -Maintain safe operations by adhering to safety procedures and regulations. -Participate in continuous improvement activities -Complete all necessary paper work as required. -Routine machine side OEE data entry -Work with production manager & programming team to seek opportunities to improve processes and reduce cycle times -Support team colleagues -Maintain good housekeeping in accordance with 5S processes and practices -Take responsibility for quality of own output -Perform other tasks as reasonably requested by your production manager. What We'll Offer As a valued member of our team, these are just a few of the benefits you'll receive: -33 days holiday (including bank holidays) -Industry leading pension scheme with salary sacrifice employer contributions up to 10%. -Private medical cover (to include Digital GP and rapid access Physio with no excess) with ability to upgrade level of benefit and cover family members. -Access to salary sacrifice benefits scheme including cycle to work and Octopus EV Scheme -4 x Life Assurance -Interactive benefits platform including wide range of discretionary benefits including technology, retail benefits, income protection. -Enhanced family friendly policies and benefits (enhanced maternity and paternity leave) and employee assistance programme -Annual share save schemes. -Opportunities for career advancement and personal growth. Benefit from support through Safran University and our internal Training and Development Schools -Get involved in our corporate social responsibility activities from sustainability initiatives, charity and fundraising, volunteering days, or supporting STEM activities at local schools and colleges nurturing the next generation of talent Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today. Why Safran? A global presence : Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment : We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core : Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities : We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence : Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring -Indentured apprentice or equivalent modern apprenticeship. -Experienced in setting and running 3 axis & 5 axis vertical machining centres and CNC lathes. -Experience with manual mills and manual lathes. -NVQ Level 2+3 Mechanical Engineering or BTEC National Diploma Mechanical Engineering (or equivalent). -Ability to use a wide range of IMTE for inspection of completed components. -Quality focused with strong attention to detail; willing to support continuous improvement.
May 14, 2026
Full time
The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Production team as a Machine Setter at our Safran Seats site based in Cwmbran . In the UK, Safran Seats specialises solely in the First Class and Business Class seating markets for wide body aircraft, with industrial and engineering teams in Cwmbran and Newport, Wales and Brackley, England. Your role The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Key Responsibilities will include: -Download programs from the file server -Setup CNC tooling assemblies and maintain tool management system -Setup and run CNC machining centres -Prove out new NPI programs -Use Vernier's, thread gauges, plug gauges and other inspection equipment to monitor tolerance requirements as defined in the engineering data. -Perform daily / weekly maintenance tasks in accordance with machine centre maintenance plan -Maintain safe operations by adhering to safety procedures and regulations. -Participate in continuous improvement activities -Complete all necessary paper work as required. -Routine machine side OEE data entry -Work with production manager & programming team to seek opportunities to improve processes and reduce cycle times -Support team colleagues -Maintain good housekeeping in accordance with 5S processes and practices -Take responsibility for quality of own output -Perform other tasks as reasonably requested by your production manager. What We'll Offer As a valued member of our team, these are just a few of the benefits you'll receive: -33 days holiday (including bank holidays) -Industry leading pension scheme with salary sacrifice employer contributions up to 10%. -Private medical cover (to include Digital GP and rapid access Physio with no excess) with ability to upgrade level of benefit and cover family members. -Access to salary sacrifice benefits scheme including cycle to work and Octopus EV Scheme -4 x Life Assurance -Interactive benefits platform including wide range of discretionary benefits including technology, retail benefits, income protection. -Enhanced family friendly policies and benefits (enhanced maternity and paternity leave) and employee assistance programme -Annual share save schemes. -Opportunities for career advancement and personal growth. Benefit from support through Safran University and our internal Training and Development Schools -Get involved in our corporate social responsibility activities from sustainability initiatives, charity and fundraising, volunteering days, or supporting STEM activities at local schools and colleges nurturing the next generation of talent Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today. Why Safran? A global presence : Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment : We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core : Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities : We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence : Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring -Indentured apprentice or equivalent modern apprenticeship. -Experienced in setting and running 3 axis & 5 axis vertical machining centres and CNC lathes. -Experience with manual mills and manual lathes. -NVQ Level 2+3 Mechanical Engineering or BTEC National Diploma Mechanical Engineering (or equivalent). -Ability to use a wide range of IMTE for inspection of completed components. -Quality focused with strong attention to detail; willing to support continuous improvement.
Production Manager - Poole TeamJobs are recruiting for a Production Manager to join a fast-growing, high-volume operation. Step into a high-impact managerial role where you will take ownership of performance, lead large teams, and make a real difference on the shop floor. This opportunity is particularly suited to candidates from automotive, vehicle processing, recycling/waste, heavy industry or other high-throughput production environments. If you thrive in a busy, fast-paced setting and enjoy improving processes and driving results, this is your opportunity to step up and shine. Salary: 45,000 - 55,000 DOE Hours: Monday to Friday Rotational Shifts: 6.00 - 15.00 & 15.00 - 00.00 42.5 hour per week Key Responsibilities Lead and inspire multi-disciplinary teams across yard, production, parts and warehouse Take ownership of shift performance and operational decision-making Drive output, productivity and labour efficiency in real time Manage operational flow and remove bottlenecks across multiple areas Drive continuous improvement initiatives and lean practices Ensure compliance with health & safety standards while optimising productivity Deliver results across output, efficiency, safety and profitability Requirements Proven experience managing large teams in a busy production or manufacturing environment Track record of delivering output in fast-paced, high-pressure environments A data-driven leader with strong commercial awareness Demonstrated success in improving performance and reducing waste Experience within the following sectors is highly desirable: Automotive manufacturing or vehicle processing Recycling / waste management FMCG or high-speed production Logistics or distribution at scale What's in it for You? Performance-related bonus 25 days holiday + bank holidays Staff discounts, including discounted fuel Health & wellbeing benefits after probation Enhanced pension contributions Ready to Make an Impact? If you're looking for a role where you can lead, influence, and grow within a thriving, high-performance operation, apply today and take the next step in your career. INDMP
May 14, 2026
Full time
Production Manager - Poole TeamJobs are recruiting for a Production Manager to join a fast-growing, high-volume operation. Step into a high-impact managerial role where you will take ownership of performance, lead large teams, and make a real difference on the shop floor. This opportunity is particularly suited to candidates from automotive, vehicle processing, recycling/waste, heavy industry or other high-throughput production environments. If you thrive in a busy, fast-paced setting and enjoy improving processes and driving results, this is your opportunity to step up and shine. Salary: 45,000 - 55,000 DOE Hours: Monday to Friday Rotational Shifts: 6.00 - 15.00 & 15.00 - 00.00 42.5 hour per week Key Responsibilities Lead and inspire multi-disciplinary teams across yard, production, parts and warehouse Take ownership of shift performance and operational decision-making Drive output, productivity and labour efficiency in real time Manage operational flow and remove bottlenecks across multiple areas Drive continuous improvement initiatives and lean practices Ensure compliance with health & safety standards while optimising productivity Deliver results across output, efficiency, safety and profitability Requirements Proven experience managing large teams in a busy production or manufacturing environment Track record of delivering output in fast-paced, high-pressure environments A data-driven leader with strong commercial awareness Demonstrated success in improving performance and reducing waste Experience within the following sectors is highly desirable: Automotive manufacturing or vehicle processing Recycling / waste management FMCG or high-speed production Logistics or distribution at scale What's in it for You? Performance-related bonus 25 days holiday + bank holidays Staff discounts, including discounted fuel Health & wellbeing benefits after probation Enhanced pension contributions Ready to Make an Impact? If you're looking for a role where you can lead, influence, and grow within a thriving, high-performance operation, apply today and take the next step in your career. INDMP
Maintenance Engineering SupervisorDays (Mon to Fri)circa £46,000 + overtime (paid at 1.5x)Okehampton, Devon Take the lead in a fast-paced, hands-on engineering role Are you a natural leader who thrives in a fast-moving manufacturing environment? Are you ready to step into a role where your expertise will directly impact production up time and team performance? We're working with a long-established and well-invested manufacturer with a strong presence in the Devon area. They're looking to appoint a Maintenance Engineering Supervisor to support the Engineering Manager in driving performance, reliability, and continuous improvement across site. This is a fantastic opportunity for a proactive and people-focused engineer looking to step into a leadership role - or for a current supervisor looking for a fresh challenge. This is what you'll be doing: You'll oversee and support a team of engineers and technicians, ensuring that all plant, machinery, and systems are maintained to the highest standards. This includes: Leading day-to-day engineering activities, overseeing breakdown response, and assigning tasks. Ensuring all planned preventative maintenance is completed on time and to standard. Coaching and developing engineers on shift, especially during high-pressure situations. Reducing breakdowns through proactive maintenance strategies and root cause analysis. Working closely with production and site teams to minimise downtime and optimise plant performance. Managing contractors, work permits, and ensuring safety compliance at all times. Supporting continuous improvement and cost-saving initiatives across the department. Monitoring and maintaining KPIs for engineering performance. Participating in the engineering call-out rota (approx. every 6 weeks) What you'll need to succeed: A time-served engineer or qualified maintenance professional (mechanical or electrical). Proven supervisory or leadership experience in a manufacturing or production environment. Excellent understanding of planned and reactive maintenance within fast-paced operations. Strong communication skills and the ability to lead from the front. A proactive approach to problem-solving and continuous improvement. Comfortable using CMMS systems and producing maintenance reports. And this is what you'll get in return: A starting salary of circa £46,000 based on 40 hours per week Overtime paid at time and a half. Participation in a call-out rota with paid attendance outside hours. Opportunities for career progression and further development. The chance to join a secure, forward-thinking business that invests in its people and equipment. Are you up to the challenge? If you're ready to lead a strong engineering team and make a real impact on site performance, apply now. For a confidential chat, get in touch with Engineering Recruiter Liam Reid today. Don't forget to ask about our referral scheme if you know someone who would be a great fit.
May 14, 2026
Full time
Maintenance Engineering SupervisorDays (Mon to Fri)circa £46,000 + overtime (paid at 1.5x)Okehampton, Devon Take the lead in a fast-paced, hands-on engineering role Are you a natural leader who thrives in a fast-moving manufacturing environment? Are you ready to step into a role where your expertise will directly impact production up time and team performance? We're working with a long-established and well-invested manufacturer with a strong presence in the Devon area. They're looking to appoint a Maintenance Engineering Supervisor to support the Engineering Manager in driving performance, reliability, and continuous improvement across site. This is a fantastic opportunity for a proactive and people-focused engineer looking to step into a leadership role - or for a current supervisor looking for a fresh challenge. This is what you'll be doing: You'll oversee and support a team of engineers and technicians, ensuring that all plant, machinery, and systems are maintained to the highest standards. This includes: Leading day-to-day engineering activities, overseeing breakdown response, and assigning tasks. Ensuring all planned preventative maintenance is completed on time and to standard. Coaching and developing engineers on shift, especially during high-pressure situations. Reducing breakdowns through proactive maintenance strategies and root cause analysis. Working closely with production and site teams to minimise downtime and optimise plant performance. Managing contractors, work permits, and ensuring safety compliance at all times. Supporting continuous improvement and cost-saving initiatives across the department. Monitoring and maintaining KPIs for engineering performance. Participating in the engineering call-out rota (approx. every 6 weeks) What you'll need to succeed: A time-served engineer or qualified maintenance professional (mechanical or electrical). Proven supervisory or leadership experience in a manufacturing or production environment. Excellent understanding of planned and reactive maintenance within fast-paced operations. Strong communication skills and the ability to lead from the front. A proactive approach to problem-solving and continuous improvement. Comfortable using CMMS systems and producing maintenance reports. And this is what you'll get in return: A starting salary of circa £46,000 based on 40 hours per week Overtime paid at time and a half. Participation in a call-out rota with paid attendance outside hours. Opportunities for career progression and further development. The chance to join a secure, forward-thinking business that invests in its people and equipment. Are you up to the challenge? If you're ready to lead a strong engineering team and make a real impact on site performance, apply now. For a confidential chat, get in touch with Engineering Recruiter Liam Reid today. Don't forget to ask about our referral scheme if you know someone who would be a great fit.
Wenzel's The Bakers Shop Manager role: Wenzel's was established in 1975 and has since become a favourite for locals in the North West and Greater London, Bedfordshire, Buckinghamshire, Berkshire, Essex, Hertfordshire, Hampshire and Surrey. We believe in delivering quality products at affordable prices and of course delivering them with outstanding customer service. We currently have over 100 shops and are expanding the brand by opening more of our retail shops. We are looking for exciting new talent with a passion for food and customer service to join our team. There is now an exciting opportunity to come and join the team as one of our Shop Managers. WHAT WE OFFER: Free meal provided every shift and 50% off all other food. Enrolment to company pension scheme Holiday entitlement of 28 days including bank holidays. Day off for your Birthday - paid day off in addition to your holiday entitlement. Staff incentives including competitions and a shop manager bonus scheme Excellent training, including apprenticeship opportunities as well as lots of career progression and development programmes. Free employee benefit scheme, offering discounts at almost 1000 online and in store retailers, gyms, restaurants, cinemas, travel and lots more A Wellbeing Centre, helping to create a happier and healthier lifestyle, as well as an employee assistance 24/7 helpline offering free confidential advice and support PAY & HOURS For our Shop Manager roles we offer a competitive pay of £30,000 to £34,000 depending on experience. The salary for a part time Shop Manager will be pro rata. A full time working week is 42 hours, but we are very happy to discuss flexible working hours, for example, 9.00 am - 3.00 pm, to accommodate your needs where we can. WHAT ARE WE LOOKING FOR? An experienced retail manager to oversee the daily operations of the shop. Someone to ensure the smooth running of the shop to drive and maximise sales and minimise costs. Someone who can lead, train and motivate a team with a hands on approach. Someone who is confident and enthusiastic, with a great work ethic and a positive attitude. Someone who is excited to work in a fast paced environment and work efficiently as part of a team. Someone who is adaptable and able to solve problems. KEY RESPONSIBILITIES Successfully manage and control the day to day running of your own shop. Manage the growth of the business through increasing sales, controlling costs and delivering profit. Work towards KPIs including wage percentage, average sale, stock, wastage and energy targets. Lead, train and develop your team to a high level. Performance manage your team as required. Ensure the sandwich and food production standards are at the required high level. Ensure the shop is clean, organised and welcoming for customers. Maintain the highest level of hygiene, cleanliness and food safety standards. Ensure the highest levels of customer service within the shop. Recruit new team members within your shop when required. Receive and check daily deliveries. Manage the shop's stock and produce. Maintain the shop displays. Have excellent knowledge and understanding of the products. Cash handling, till operation and banking. Open or close the shop when required. Wenzel's The Bakers is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity. REF: WENMP
May 14, 2026
Full time
Wenzel's The Bakers Shop Manager role: Wenzel's was established in 1975 and has since become a favourite for locals in the North West and Greater London, Bedfordshire, Buckinghamshire, Berkshire, Essex, Hertfordshire, Hampshire and Surrey. We believe in delivering quality products at affordable prices and of course delivering them with outstanding customer service. We currently have over 100 shops and are expanding the brand by opening more of our retail shops. We are looking for exciting new talent with a passion for food and customer service to join our team. There is now an exciting opportunity to come and join the team as one of our Shop Managers. WHAT WE OFFER: Free meal provided every shift and 50% off all other food. Enrolment to company pension scheme Holiday entitlement of 28 days including bank holidays. Day off for your Birthday - paid day off in addition to your holiday entitlement. Staff incentives including competitions and a shop manager bonus scheme Excellent training, including apprenticeship opportunities as well as lots of career progression and development programmes. Free employee benefit scheme, offering discounts at almost 1000 online and in store retailers, gyms, restaurants, cinemas, travel and lots more A Wellbeing Centre, helping to create a happier and healthier lifestyle, as well as an employee assistance 24/7 helpline offering free confidential advice and support PAY & HOURS For our Shop Manager roles we offer a competitive pay of £30,000 to £34,000 depending on experience. The salary for a part time Shop Manager will be pro rata. A full time working week is 42 hours, but we are very happy to discuss flexible working hours, for example, 9.00 am - 3.00 pm, to accommodate your needs where we can. WHAT ARE WE LOOKING FOR? An experienced retail manager to oversee the daily operations of the shop. Someone to ensure the smooth running of the shop to drive and maximise sales and minimise costs. Someone who can lead, train and motivate a team with a hands on approach. Someone who is confident and enthusiastic, with a great work ethic and a positive attitude. Someone who is excited to work in a fast paced environment and work efficiently as part of a team. Someone who is adaptable and able to solve problems. KEY RESPONSIBILITIES Successfully manage and control the day to day running of your own shop. Manage the growth of the business through increasing sales, controlling costs and delivering profit. Work towards KPIs including wage percentage, average sale, stock, wastage and energy targets. Lead, train and develop your team to a high level. Performance manage your team as required. Ensure the sandwich and food production standards are at the required high level. Ensure the shop is clean, organised and welcoming for customers. Maintain the highest level of hygiene, cleanliness and food safety standards. Ensure the highest levels of customer service within the shop. Recruit new team members within your shop when required. Receive and check daily deliveries. Manage the shop's stock and produce. Maintain the shop displays. Have excellent knowledge and understanding of the products. Cash handling, till operation and banking. Open or close the shop when required. Wenzel's The Bakers is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity. REF: WENMP
Sponsorship Sales Manager - Pharma Events London, Hybrid (2-3 days in office) + Travel Salary up to £55,000 + Generous Commission + Excellent Benefits We're looking for a driven, consultative sales professional to join a globally recognised media and B2B events business, selling sponsorship at the heart of the pharmaceutical industry. This is a role for someone who thrives on autonomy - understanding a client's world and crafting bespoke, high-value sponsorship solutions that genuinely meet their needs. If you're energised by working with leading pharma brands and want a role where your impact is visible and your earnings are uncapped, read on. The Role Sell tailored sponsorship packages across an international portfolio of pharma events Partner with some of the world's most prominent pharmaceutical brands to deliver solutions aligned to their business goals Collaborate with the Conference Production team to shape compelling programmes that attract the right audiences Stay curious about market shifts and help clients navigate change through thought leadership-led events Report to the Head of Sales as a lead individual contributor, meeting and exceeding revenue targets About You Ideally, 3+ years B2B sponsorship sales experience with a strong track record of success Experience selling complex, high-value packages within the events industry; pharma, Life sciences or healthcare exposure is a strong advantage Strong commercial instincts with the ability to spot and develop new business opportunities Excellent communicator, confident, engaging C-suite executives both in writing and in person Collaborative, ambitious, and eager to keep developing your skills Why Join? Uncapped commission and generous company benefits Hybrid working - 2-3 days in the office each week Mission-driven culture with a genuine commitment to work-life balance Comprehensive benefits including flexible holiday, pension, tuition reimbursement, and wellbeing support Interested in this Sponsorship Sales Manager role? Get in touch with Helen Yarrow at Jackson Barnes Recruitment. Referrals are very welcome - if you know someone who fits this, please share this ad - check out our referral scheme on the Jackson Barnes Recruitment website. Visit Jackson Barnes Recruitment's website to learn more about how we connect top commercial talent with world-class media and events organisations. About Jackson Barnes Recruitment Jackson Barnes Recruitment delivers international recruitment solutions within the events, media, and publishing sectors. Jackson Barnes recruits Graduate to MD level in the following positions: • Researcher • Conference producer • Event Marketing • Sales - delegate, sponsorship & Business Development • Event Manager • Editor We recruit for organisations in the UK and overseas, with success in London, Dubai, New York, Singapore and Australia.
May 14, 2026
Full time
Sponsorship Sales Manager - Pharma Events London, Hybrid (2-3 days in office) + Travel Salary up to £55,000 + Generous Commission + Excellent Benefits We're looking for a driven, consultative sales professional to join a globally recognised media and B2B events business, selling sponsorship at the heart of the pharmaceutical industry. This is a role for someone who thrives on autonomy - understanding a client's world and crafting bespoke, high-value sponsorship solutions that genuinely meet their needs. If you're energised by working with leading pharma brands and want a role where your impact is visible and your earnings are uncapped, read on. The Role Sell tailored sponsorship packages across an international portfolio of pharma events Partner with some of the world's most prominent pharmaceutical brands to deliver solutions aligned to their business goals Collaborate with the Conference Production team to shape compelling programmes that attract the right audiences Stay curious about market shifts and help clients navigate change through thought leadership-led events Report to the Head of Sales as a lead individual contributor, meeting and exceeding revenue targets About You Ideally, 3+ years B2B sponsorship sales experience with a strong track record of success Experience selling complex, high-value packages within the events industry; pharma, Life sciences or healthcare exposure is a strong advantage Strong commercial instincts with the ability to spot and develop new business opportunities Excellent communicator, confident, engaging C-suite executives both in writing and in person Collaborative, ambitious, and eager to keep developing your skills Why Join? Uncapped commission and generous company benefits Hybrid working - 2-3 days in the office each week Mission-driven culture with a genuine commitment to work-life balance Comprehensive benefits including flexible holiday, pension, tuition reimbursement, and wellbeing support Interested in this Sponsorship Sales Manager role? Get in touch with Helen Yarrow at Jackson Barnes Recruitment. Referrals are very welcome - if you know someone who fits this, please share this ad - check out our referral scheme on the Jackson Barnes Recruitment website. Visit Jackson Barnes Recruitment's website to learn more about how we connect top commercial talent with world-class media and events organisations. About Jackson Barnes Recruitment Jackson Barnes Recruitment delivers international recruitment solutions within the events, media, and publishing sectors. Jackson Barnes recruits Graduate to MD level in the following positions: • Researcher • Conference producer • Event Marketing • Sales - delegate, sponsorship & Business Development • Event Manager • Editor We recruit for organisations in the UK and overseas, with success in London, Dubai, New York, Singapore and Australia.
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 14, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
Production Controller (Contract) Duration: 6 Months (Possibility for extension) Location: Lincolnshire Rate: A highly competitive PAYE Rate is available for suitable candidates Role Profile We are currently seeking an additional member for our dedicated Production Controller based on-site in our customer's dock side facilities in Grimsby, who will be working to support the existing shift team working on the Lynn & Inner Dowsing (LID) Windfarm. As a Production Controller you will be reporting into the Site Manager and will be responsible for the first line onshore response for emergency coordination of incidents at sea or on turbines. This is a challenging and varied role in which every day will be different Note: As a Production Controller you will be required to cover the role on a 24/7/365 basis, including 50%-night shifts, to meet scheduled and often unscheduled site requirements. Key Responsibilities: Working closely with the Incident Management Team in the central function Undertaking remote monitoring of operational assets, logging operational data/events, and communicating and co-ordinate outputs to sites and appropriate stakeholders Ensuring robust shift handover and cooperating with clients' representatives to clarify orders and issues Participating in investigating and resolving operational and/or technical problems Controlling safe operations offshore, ensuring that passengers and vessel crew are authorized and competent for the planned works Controlling vessel movements by establishing exclusion zones where appropriate Making judgements and forecasts about the suitability of weather for safe transfer of personnel and work in the field and justify these to the customers Supporting offsite vessel management teams with vessel audits Liaising with the dock operators and negotiate lock access in accordance with service and project team requirements Interfacing with Service Technology, Operational Support, and other Siemens teams to generate and provide agreed data and reports Creating and issuing Notice to Mariners in line with site consent requirements Skills & Experience: You to be computer literate with excellent analytical skills and a drive for stats Knowledge or experience in all Microsoft Office packages is essential Competent to work under pressure to deadlines and take responsibility for own work Good organisation and communication skills Driven with ability to work on own initiative to achieve targets Shift Pattern Beginning on a Monday, the 12-hour shift rotation is as follows: 2 days & 2 nights 5 days off 2 days & 3 nights 4 days off 3 days & 2 nights 12 days off Candidates will need to show evidence of the above in their CV in order to be considered. If you feel you have the skills and experience and want to hear more about this role 'apply now' to declare your interest in this opportunity with our client. Your application will be observed by our dedicated team. We will respond to all successful applicants ASAP however, please be advised that we will always look to contact you further from this time should we need further applicants or if other opportunities arise relevant to your skillset. Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. As part of our standard hiring process to manage risk, please note background screening checks will be conducted on all hires before commencing employment. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
May 13, 2026
Contractor
Production Controller (Contract) Duration: 6 Months (Possibility for extension) Location: Lincolnshire Rate: A highly competitive PAYE Rate is available for suitable candidates Role Profile We are currently seeking an additional member for our dedicated Production Controller based on-site in our customer's dock side facilities in Grimsby, who will be working to support the existing shift team working on the Lynn & Inner Dowsing (LID) Windfarm. As a Production Controller you will be reporting into the Site Manager and will be responsible for the first line onshore response for emergency coordination of incidents at sea or on turbines. This is a challenging and varied role in which every day will be different Note: As a Production Controller you will be required to cover the role on a 24/7/365 basis, including 50%-night shifts, to meet scheduled and often unscheduled site requirements. Key Responsibilities: Working closely with the Incident Management Team in the central function Undertaking remote monitoring of operational assets, logging operational data/events, and communicating and co-ordinate outputs to sites and appropriate stakeholders Ensuring robust shift handover and cooperating with clients' representatives to clarify orders and issues Participating in investigating and resolving operational and/or technical problems Controlling safe operations offshore, ensuring that passengers and vessel crew are authorized and competent for the planned works Controlling vessel movements by establishing exclusion zones where appropriate Making judgements and forecasts about the suitability of weather for safe transfer of personnel and work in the field and justify these to the customers Supporting offsite vessel management teams with vessel audits Liaising with the dock operators and negotiate lock access in accordance with service and project team requirements Interfacing with Service Technology, Operational Support, and other Siemens teams to generate and provide agreed data and reports Creating and issuing Notice to Mariners in line with site consent requirements Skills & Experience: You to be computer literate with excellent analytical skills and a drive for stats Knowledge or experience in all Microsoft Office packages is essential Competent to work under pressure to deadlines and take responsibility for own work Good organisation and communication skills Driven with ability to work on own initiative to achieve targets Shift Pattern Beginning on a Monday, the 12-hour shift rotation is as follows: 2 days & 2 nights 5 days off 2 days & 3 nights 4 days off 3 days & 2 nights 12 days off Candidates will need to show evidence of the above in their CV in order to be considered. If you feel you have the skills and experience and want to hear more about this role 'apply now' to declare your interest in this opportunity with our client. Your application will be observed by our dedicated team. We will respond to all successful applicants ASAP however, please be advised that we will always look to contact you further from this time should we need further applicants or if other opportunities arise relevant to your skillset. Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. As part of our standard hiring process to manage risk, please note background screening checks will be conducted on all hires before commencing employment. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.
W Talent are exclusively representing a manufacturing company based in Nottingham (Alfreton) who are looking to recruit a permanent Multi Skilled Maintenance Engineer. This is an excellent opportunity to join a fast-paced manufacturing environment, supporting production through proactive maintenance and rapid response to equipment breakdowns while ensuring high engineering and safety standards are maintained at all times. Job Description The successful Multi Skilled Maintenance Engineer will be responsible for both reactive and preventative maintenance across a busy manufacturing facility. The role will involve electrical and mechanical fault finding, supporting continuous improvement initiatives, and ensuring all maintenance activities are completed safely and effectively in line with company procedures. Key Responsibilities Respond promptly to machinery breakdowns and complete repairs to minimise downtime Carry out planned preventative maintenance activities across site equipment Work in accordance with all health and safety procedures including LOTO and Dynamic Risk Assessments Manage and action Engineering Reports through the CMMS system Update all maintenance activities and completed work accurately within the CMMS system Communicate effectively with Planning Teams, Shift Managers, Engineering Supervisors, and the Engineering Manager regarding machine status and repair progress Ensure detailed shift reports are completed outlining all engineering activities undertaken Liaise with machine manufacturers and technical support teams when additional fault diagnosis support is required Ensure preventative maintenance schedules are completed within required daily, weekly, and monthly timeframes Maintain high housekeeping standards within the maintenance workshop and engineering stores areas Record and manage spare parts usage, ensuring stock is reordered when required Support continuous improvement activities to improve machine reliability and efficiency Key Requirements Engineering qualification Previous experience working within a manufacturing or industrial environment Electrical fault-finding experience Mechanical fault-finding experience Experience working with pneumatics and hydraulics Good understanding of preventative maintenance systems and processes Strong communication and organisational skills Ability to work independently and as part of a team in a fast-paced environment Good understanding of health and safety procedures within manufacturing environments Advantageous Requirements Previous experience using CMMS systems Experience working within FMCG or high-volume manufacturing environments Knowledge of continuous improvement methodologies 17th/18th Edition electrical qualification PLC fault-finding experience Details & Benefits Salary: 40-50K Job Type: Permanent, full-time Hours: Continental shifts or rotating shifts available Location: Nottingham (Alfreton) Holiday: 25 days' holiday plus bank holidays Pension: Standard Additional: Overtime opportunities, training and development, employee benefits package If you feel you have the suitable background experience and skills to fulfil this position and live within a commutable distance of Nottingham (Alfreton) please apply directly to Molly Rushby at W Talent.
May 13, 2026
Full time
W Talent are exclusively representing a manufacturing company based in Nottingham (Alfreton) who are looking to recruit a permanent Multi Skilled Maintenance Engineer. This is an excellent opportunity to join a fast-paced manufacturing environment, supporting production through proactive maintenance and rapid response to equipment breakdowns while ensuring high engineering and safety standards are maintained at all times. Job Description The successful Multi Skilled Maintenance Engineer will be responsible for both reactive and preventative maintenance across a busy manufacturing facility. The role will involve electrical and mechanical fault finding, supporting continuous improvement initiatives, and ensuring all maintenance activities are completed safely and effectively in line with company procedures. Key Responsibilities Respond promptly to machinery breakdowns and complete repairs to minimise downtime Carry out planned preventative maintenance activities across site equipment Work in accordance with all health and safety procedures including LOTO and Dynamic Risk Assessments Manage and action Engineering Reports through the CMMS system Update all maintenance activities and completed work accurately within the CMMS system Communicate effectively with Planning Teams, Shift Managers, Engineering Supervisors, and the Engineering Manager regarding machine status and repair progress Ensure detailed shift reports are completed outlining all engineering activities undertaken Liaise with machine manufacturers and technical support teams when additional fault diagnosis support is required Ensure preventative maintenance schedules are completed within required daily, weekly, and monthly timeframes Maintain high housekeeping standards within the maintenance workshop and engineering stores areas Record and manage spare parts usage, ensuring stock is reordered when required Support continuous improvement activities to improve machine reliability and efficiency Key Requirements Engineering qualification Previous experience working within a manufacturing or industrial environment Electrical fault-finding experience Mechanical fault-finding experience Experience working with pneumatics and hydraulics Good understanding of preventative maintenance systems and processes Strong communication and organisational skills Ability to work independently and as part of a team in a fast-paced environment Good understanding of health and safety procedures within manufacturing environments Advantageous Requirements Previous experience using CMMS systems Experience working within FMCG or high-volume manufacturing environments Knowledge of continuous improvement methodologies 17th/18th Edition electrical qualification PLC fault-finding experience Details & Benefits Salary: 40-50K Job Type: Permanent, full-time Hours: Continental shifts or rotating shifts available Location: Nottingham (Alfreton) Holiday: 25 days' holiday plus bank holidays Pension: Standard Additional: Overtime opportunities, training and development, employee benefits package If you feel you have the suitable background experience and skills to fulfil this position and live within a commutable distance of Nottingham (Alfreton) please apply directly to Molly Rushby at W Talent.
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
Who we are We're M ller UK & Ireland, a family-run dairy business and we're experts at what we do. Dairy is a key part of a healthy and balanced diet and we're super proud to help meet the nutritional needs of millions of people, every, single, day. To do this, our business has been split into two areas: M ller Milk & Ingredients (MMI) and M ller Yogurt & Desserts (MYD). Join MMI and step into a culture that's fast-paced and full of opportunity. With great benefits, exciting challenges, a dream team of people, this is your chance to make a real impact. Over here, we're processing enough milk to make 66 billion cups of tea every year. And we're so much more than just milk. This is the place to come for cream, butter, milk drinks and ingredients products (a lot, we know), all made from milk from over 1,000 supplying farmers in Britain. Why M ller? Milk flows through everything at M ller - from farm to factory to fridge. But the true impact comes from our people, in each and every corner of the business, working hard and as a team to put smiles on faces everywhere, making each day delicious for our shoppers. As the UK's most popular dairy brand, we're always striving to make a real difference for our planet, our partners and our people, making sure we're helping to create a more sustainable dairy future.We're growing to keep up with the millions of people reaching for our branded and private label products on shelves everywhere. Join a culture full of pace that's bold and entrepreneurial, with opportunities that are yours for the taking - and even enjoy every benefit and bonus to sweeten the deal. Role: Shift Manager - Food Manufacturing Location: Skelmersdale Shifts: 4 on 4 off 7-7 (Days & Nights) Contract: Full-time, Permanent Who We Are We're M ller UK & Ireland, home to some of the UK's best-loved dairy and food products. Our Skelmersdale site plays a key role in delivering high-quality food at pace, and we're looking for strong manufacturing leaders to help us continue delivering for our customers. Join M ller Milk & Ingredients and be part of a culture known for pace, ownership and development. With significant investment, high visibility and opportunities for progression, this is a great time to step into a leadership role with real impact. About the Role We're recruiting Shift Managers with proven experience in food manufacturing to lead our production teams across days and nights. You'll be accountable for delivering shift performance safely, efficiently and consistently, ensuring production targets, food safety and quality standards are achieved. This role suits both experienced Shift Managers and high-performing Team Leaders/Production Supervisors ready to step up, provided you have the right food manufacturing background and leadership capability . Key Responsibilities Lead and manage a production team (typically 10-20 colleagues) to deliver daily shift performance Ensure full compliance with food safety, quality, hygiene and H&S standards Deliver against KPIs including safety, output, waste, efficiency and labour utilisation Manage staffing levels, training, onboarding, performance and development Conduct return-to-work meetings, investigations and performance conversations Maintain an audit-ready environment through strong documentation and process control Use data to support decision-making, drive performance and identify improvements Support Continuous Improvement and Operational Excellence activity (CI desirable, not essential) Liaise cross-functionally (Quality, Engineering, Planning, HR) to ensure smooth shift operation Promote a positive, safe and high-performance culture on shift What We're Looking For Essential (must have): Experience working in food manufacturing (any category: bakery, beverages, ready meals, ingredients, confectionery, poultry, dairy etc.) Proven supervisory or managerial experience leading people in a food production environment Ability to lead, motivate and direct a team in a fast-paced, shift-based environment Strong understanding of safety, quality and compliance requirements Confident communicator who can challenge constructively and make decisions in real time Good organisational skills with a structured approach to shift execution Desirable (nice to have): Experience with process equipment and production machinery Working knowledge of CI/Lean (5S, waste reduction, basic RCA etc.) Exposure to KPIs such as OEE, waste, labour efficiency Experience in a high-care or high-risk environment Why Join Us? A culture with pace, ownership and opportunity A supportive leadership team committed to developing future managers High visibility and career progression routes within a major UK food manufacturer Opportunity to influence, lead and shape shift performance in a key manufacturing sit Competitive salary with up to 10% annual bonus 33 days annual leave (inclusive of bank holidays) 4x life assurance Healthcare cover Matched pension contributions (up to 8%) Access to perkbox - saving money across numerous retailers At M ller, we're committed to creating an inclusive workplace where everyone feels they belong. We welcome applications from all backgrounds and encourage people to apply even if they don't meet every requirement listed. If you need reasonable adjustments at any stage of the recruitment process, please let us know - we're happy to support you.
May 13, 2026
Full time
Who we are We're M ller UK & Ireland, a family-run dairy business and we're experts at what we do. Dairy is a key part of a healthy and balanced diet and we're super proud to help meet the nutritional needs of millions of people, every, single, day. To do this, our business has been split into two areas: M ller Milk & Ingredients (MMI) and M ller Yogurt & Desserts (MYD). Join MMI and step into a culture that's fast-paced and full of opportunity. With great benefits, exciting challenges, a dream team of people, this is your chance to make a real impact. Over here, we're processing enough milk to make 66 billion cups of tea every year. And we're so much more than just milk. This is the place to come for cream, butter, milk drinks and ingredients products (a lot, we know), all made from milk from over 1,000 supplying farmers in Britain. Why M ller? Milk flows through everything at M ller - from farm to factory to fridge. But the true impact comes from our people, in each and every corner of the business, working hard and as a team to put smiles on faces everywhere, making each day delicious for our shoppers. As the UK's most popular dairy brand, we're always striving to make a real difference for our planet, our partners and our people, making sure we're helping to create a more sustainable dairy future.We're growing to keep up with the millions of people reaching for our branded and private label products on shelves everywhere. Join a culture full of pace that's bold and entrepreneurial, with opportunities that are yours for the taking - and even enjoy every benefit and bonus to sweeten the deal. Role: Shift Manager - Food Manufacturing Location: Skelmersdale Shifts: 4 on 4 off 7-7 (Days & Nights) Contract: Full-time, Permanent Who We Are We're M ller UK & Ireland, home to some of the UK's best-loved dairy and food products. Our Skelmersdale site plays a key role in delivering high-quality food at pace, and we're looking for strong manufacturing leaders to help us continue delivering for our customers. Join M ller Milk & Ingredients and be part of a culture known for pace, ownership and development. With significant investment, high visibility and opportunities for progression, this is a great time to step into a leadership role with real impact. About the Role We're recruiting Shift Managers with proven experience in food manufacturing to lead our production teams across days and nights. You'll be accountable for delivering shift performance safely, efficiently and consistently, ensuring production targets, food safety and quality standards are achieved. This role suits both experienced Shift Managers and high-performing Team Leaders/Production Supervisors ready to step up, provided you have the right food manufacturing background and leadership capability . Key Responsibilities Lead and manage a production team (typically 10-20 colleagues) to deliver daily shift performance Ensure full compliance with food safety, quality, hygiene and H&S standards Deliver against KPIs including safety, output, waste, efficiency and labour utilisation Manage staffing levels, training, onboarding, performance and development Conduct return-to-work meetings, investigations and performance conversations Maintain an audit-ready environment through strong documentation and process control Use data to support decision-making, drive performance and identify improvements Support Continuous Improvement and Operational Excellence activity (CI desirable, not essential) Liaise cross-functionally (Quality, Engineering, Planning, HR) to ensure smooth shift operation Promote a positive, safe and high-performance culture on shift What We're Looking For Essential (must have): Experience working in food manufacturing (any category: bakery, beverages, ready meals, ingredients, confectionery, poultry, dairy etc.) Proven supervisory or managerial experience leading people in a food production environment Ability to lead, motivate and direct a team in a fast-paced, shift-based environment Strong understanding of safety, quality and compliance requirements Confident communicator who can challenge constructively and make decisions in real time Good organisational skills with a structured approach to shift execution Desirable (nice to have): Experience with process equipment and production machinery Working knowledge of CI/Lean (5S, waste reduction, basic RCA etc.) Exposure to KPIs such as OEE, waste, labour efficiency Experience in a high-care or high-risk environment Why Join Us? A culture with pace, ownership and opportunity A supportive leadership team committed to developing future managers High visibility and career progression routes within a major UK food manufacturer Opportunity to influence, lead and shape shift performance in a key manufacturing sit Competitive salary with up to 10% annual bonus 33 days annual leave (inclusive of bank holidays) 4x life assurance Healthcare cover Matched pension contributions (up to 8%) Access to perkbox - saving money across numerous retailers At M ller, we're committed to creating an inclusive workplace where everyone feels they belong. We welcome applications from all backgrounds and encourage people to apply even if they don't meet every requirement listed. If you need reasonable adjustments at any stage of the recruitment process, please let us know - we're happy to support you.
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
May 13, 2026
Full time
GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo's, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts. Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland Working on Electrical Control Panels & Electrical Control Systems Working on PLC's Consultative approach with all clients on their sites (Plant Directors, Managers etc.). Reading Electrical Technical Drawings. Working on HV & LV. Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment. Inspection & Testing of Electrical Machinery / Parts & Components. Some Mechanical Engineering tasks. Experience / Attributes Required: Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other). 18th Edition IET Reg's Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery). PLC experience Automated machinery experience Electrical Control Systems experience Gas & Oil Burners experience Boiler experience Fault finding, diagnosing, commissioning & retrofit experience HV & LV experience Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available & fantastic earning potential
