Do you have an electrical engineering qualification? Do you feel comfortable working on bespoke control panels? Do you have good practical skills for building and testing machinery? If so, this could be the ideal role for you! Futures are working with a modern and forward thinking engineering business who are looking to add an Control Panel Technician to the team. You need previous experience of assembling electrical related products (control panels, cables, harnesses, looms) in a manual development environment. This is a great opportunity to work within a company that are expanding, have a great atmosphere, and look after their staff. If you've got hands-on electrical experience as an Electrical Technician, Panel Wirer or similar please do apply now! Control Panel Technician / Electrical Technician - Role Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels Control panel layout and assembly. Produce and install wiring harness and looms. Wiring of control units and interface boxes. Mechanical assembly, typically extruded aluminium frame assemblies. Functional testing, onsite commissioning and installations On site installations, including, electrical installations Control Panel Technician / Electrical Technician - Skills and Abilities - Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels Electrical engineering qualification, minimum NVQ level 3 Experience manufacturing HV harnesses / looms / cables Experience building control panels or similar Producing work to a high-quality standard; replicating this standard on each build Electrical Technician, Panel Wirer, Electrical Assembler, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels If this role appeals please do apply now
May 17, 2026
Full time
Do you have an electrical engineering qualification? Do you feel comfortable working on bespoke control panels? Do you have good practical skills for building and testing machinery? If so, this could be the ideal role for you! Futures are working with a modern and forward thinking engineering business who are looking to add an Control Panel Technician to the team. You need previous experience of assembling electrical related products (control panels, cables, harnesses, looms) in a manual development environment. This is a great opportunity to work within a company that are expanding, have a great atmosphere, and look after their staff. If you've got hands-on electrical experience as an Electrical Technician, Panel Wirer or similar please do apply now! Control Panel Technician / Electrical Technician - Role Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels Control panel layout and assembly. Produce and install wiring harness and looms. Wiring of control units and interface boxes. Mechanical assembly, typically extruded aluminium frame assemblies. Functional testing, onsite commissioning and installations On site installations, including, electrical installations Control Panel Technician / Electrical Technician - Skills and Abilities - Panel Wirer, Electrical Engineer, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels Electrical engineering qualification, minimum NVQ level 3 Experience manufacturing HV harnesses / looms / cables Experience building control panels or similar Producing work to a high-quality standard; replicating this standard on each build Electrical Technician, Panel Wirer, Electrical Assembler, Sub-assemblies, Looms, Harnesses, Cables, HV, LV, Panels If this role appeals please do apply now
South West Recruitment Ltd
Blandford Forum, Dorset
We are recruiting for a Skilled Prototype Wire person on a contract basis, for a world class test system solutions provider, delivering high quality, high performance and cost effective automated test equipment to the aerospace, defence, rail & transport, telecoms and energy market places for over 30 years. The company have built their reputation by providing their customers with exceptional service and system support, consistently solving their technically complex test engineering challenges wherever they are located. Salary: This position comes with a very competitive market related salary on a contract basis. Please call Alan for more details on both the position and the company. Length of contract is minimum of 3 months. Both Self employed and PAYE welcome. Hours can be compressed into a day week Monday to Thursday. Hours of Work: 37 hours per week, typically comprising of 8 hours Monday-Thursday, 5 hours Friday Working Week: Mon-Thurs = 8 hours paid (8.5 hours on site), flexible start/finish (as early as 7am start, 4pm finish, or as late as 9am start, 6pm finish. Friday = 5 hours paid (early start as 7am) All employees now have the option to move to a compressed 4 day working week (typically 37 hours Monday-Thursday) Employees have the option to request flexible working (subject to company policy) Location: Blandford Forum, Dorset, Site based. Job Summary Producing looms/cable assemblies & test equipment items from drawings & kits to the required build standards and agreed time frames. minimum information & by liaising with in-house engineers. Our preference is for Prototype Wire Persons to join our growing team but we are also interested in Production Wire Persons who are experienced in producing high-quality sub-assemblies, looms and cable assemblies to IPC 620/military/aerospace standards We make prototype and very small production runs of bespoke test systems, harnesses and subassemblies (i.e., typically no more of 3 of the same product) Responsibilities Able to solder to a consistently high standard Production of wiring looms/cable assemblies: comfortable with crimping, soldering, lacing & splicing to aerospace standards Wiring of cabinets and fixtures Assembly of PCBs (desirable but not essential) Extensive knowledge of cable types, connectors, cable assembly techniques and applications Able to liaise with in-house engineers with technical queries and provide build solutions for prototype assemblies Understanding of engineering drawings, wiring schedules and circuit diagrams Able to solder to a consistently high standard Familiar with a variety of mil spec connectors, cable production techniques Able to work to IPC 620 Class 3 Able to work to deadlines Tidy, methodical and accurate Own standard wiring tools (specialized tools will be supplied) Able to work independently Good team player Willing to provide on-site support at customer premises when required ESD awareness Qualifications and Experience: Experience in similar work essential (ideally within the Defense / Aerospace sector) IPC 620 certified Demonstrated capability by skills test Full driving license Possess all requirements for successfully meeting formal Security Check (SC) criteria Benefits 24 days holiday plus bank holidays Holiday can be taken in hours rather than full or half days if the employee prefers Company pension Access to a national employee rewards scheme, offering discounts and offers on brand name fashion, days out and restaurants. To apply for this position please submit an up to date CV and alternatively please call Alan for a more detailed job spec and details about the company.
May 17, 2026
Contractor
We are recruiting for a Skilled Prototype Wire person on a contract basis, for a world class test system solutions provider, delivering high quality, high performance and cost effective automated test equipment to the aerospace, defence, rail & transport, telecoms and energy market places for over 30 years. The company have built their reputation by providing their customers with exceptional service and system support, consistently solving their technically complex test engineering challenges wherever they are located. Salary: This position comes with a very competitive market related salary on a contract basis. Please call Alan for more details on both the position and the company. Length of contract is minimum of 3 months. Both Self employed and PAYE welcome. Hours can be compressed into a day week Monday to Thursday. Hours of Work: 37 hours per week, typically comprising of 8 hours Monday-Thursday, 5 hours Friday Working Week: Mon-Thurs = 8 hours paid (8.5 hours on site), flexible start/finish (as early as 7am start, 4pm finish, or as late as 9am start, 6pm finish. Friday = 5 hours paid (early start as 7am) All employees now have the option to move to a compressed 4 day working week (typically 37 hours Monday-Thursday) Employees have the option to request flexible working (subject to company policy) Location: Blandford Forum, Dorset, Site based. Job Summary Producing looms/cable assemblies & test equipment items from drawings & kits to the required build standards and agreed time frames. minimum information & by liaising with in-house engineers. Our preference is for Prototype Wire Persons to join our growing team but we are also interested in Production Wire Persons who are experienced in producing high-quality sub-assemblies, looms and cable assemblies to IPC 620/military/aerospace standards We make prototype and very small production runs of bespoke test systems, harnesses and subassemblies (i.e., typically no more of 3 of the same product) Responsibilities Able to solder to a consistently high standard Production of wiring looms/cable assemblies: comfortable with crimping, soldering, lacing & splicing to aerospace standards Wiring of cabinets and fixtures Assembly of PCBs (desirable but not essential) Extensive knowledge of cable types, connectors, cable assembly techniques and applications Able to liaise with in-house engineers with technical queries and provide build solutions for prototype assemblies Understanding of engineering drawings, wiring schedules and circuit diagrams Able to solder to a consistently high standard Familiar with a variety of mil spec connectors, cable production techniques Able to work to IPC 620 Class 3 Able to work to deadlines Tidy, methodical and accurate Own standard wiring tools (specialized tools will be supplied) Able to work independently Good team player Willing to provide on-site support at customer premises when required ESD awareness Qualifications and Experience: Experience in similar work essential (ideally within the Defense / Aerospace sector) IPC 620 certified Demonstrated capability by skills test Full driving license Possess all requirements for successfully meeting formal Security Check (SC) criteria Benefits 24 days holiday plus bank holidays Holiday can be taken in hours rather than full or half days if the employee prefers Company pension Access to a national employee rewards scheme, offering discounts and offers on brand name fashion, days out and restaurants. To apply for this position please submit an up to date CV and alternatively please call Alan for a more detailed job spec and details about the company.
Assembly Operative Double days, moving to Night Shift after training. Havant £15.76 per hour rising to £16.40 per hour + On Site Parking + Subsidised Canteen. Double Day Shift (6am 2pm / 2pm 10pm Mon Fri) moving to Night Shift (10pm to 6am Sunday to Thursday nights) after initial training. Are you an experienced Assembler with a manufacturing background and confident using hand tools Do you enjoy working in a fast-paced production environment where quality and teamwork matter Can you work night shifts Workshop Recruitment is supporting a large manufacturer of electrical safety devices in the search for assembler / testers to join their production team in Havant. This is an ongoing contract opportunity offering stable hours, a structured shift pattern, and excellent onsite facilities. The successful Assembler will support the assembly and testing of a range of small electrical products while maintaining high quality standards. This role would suit someone with previous production or manufacturing experience looking for a long-term opportunity. Key Responsibilities Assemble small electrical products to specification Use hand tools and basic assembly equipment safely Follow production instructions and quality procedures Test completed products Inspect completed products for faults or defects Maintain a clean and organised work area Work efficiently to meet production targets Support other manufacturing tasks as required Skills & Knowledge Required Previous experience as an Assembler or production operative Manufacturing or production background preferred Able to stand while working Confident using hand tools Good attention to detail Ability to follow written instructions Reliable and punctual approach to work Able to work effectively within a team Good manual dexterity and practical skills
May 17, 2026
Seasonal
Assembly Operative Double days, moving to Night Shift after training. Havant £15.76 per hour rising to £16.40 per hour + On Site Parking + Subsidised Canteen. Double Day Shift (6am 2pm / 2pm 10pm Mon Fri) moving to Night Shift (10pm to 6am Sunday to Thursday nights) after initial training. Are you an experienced Assembler with a manufacturing background and confident using hand tools Do you enjoy working in a fast-paced production environment where quality and teamwork matter Can you work night shifts Workshop Recruitment is supporting a large manufacturer of electrical safety devices in the search for assembler / testers to join their production team in Havant. This is an ongoing contract opportunity offering stable hours, a structured shift pattern, and excellent onsite facilities. The successful Assembler will support the assembly and testing of a range of small electrical products while maintaining high quality standards. This role would suit someone with previous production or manufacturing experience looking for a long-term opportunity. Key Responsibilities Assemble small electrical products to specification Use hand tools and basic assembly equipment safely Follow production instructions and quality procedures Test completed products Inspect completed products for faults or defects Maintain a clean and organised work area Work efficiently to meet production targets Support other manufacturing tasks as required Skills & Knowledge Required Previous experience as an Assembler or production operative Manufacturing or production background preferred Able to stand while working Confident using hand tools Good attention to detail Ability to follow written instructions Reliable and punctual approach to work Able to work effectively within a team Good manual dexterity and practical skills
A leading manufacturing company in Scarborough is searching for an Electrical Assembly Technician. Responsibilities include wiring and building bespoke machinery within a dynamic team. Candidates should have experience with 3 phase and control panels, strong fault-finding skills, and ideally a level 3 qualification in electrical engineering. The position offers competitive rates of pay and opportunities for overtime and training.
May 17, 2026
Full time
A leading manufacturing company in Scarborough is searching for an Electrical Assembly Technician. Responsibilities include wiring and building bespoke machinery within a dynamic team. Candidates should have experience with 3 phase and control panels, strong fault-finding skills, and ideally a level 3 qualification in electrical engineering. The position offers competitive rates of pay and opportunities for overtime and training.
Production Assembler - Electronics Coventry - Ansty Park 18 per hour, rising to 19 per hour 4-Day Working Week 20-Week Project Immediate Start Manpower is recruiting experienced Production Assemblers to join a secure, classified manufacturing project based in Coventry. These are temporary roles for an initial 20-week period, offering competitive pay and a 4-day working week. Screening & Vetting Requirements Due to the nature of this project, the following are mandatory: BPSS clearance UK Born nationals who still hold UK nationality only Trade Tests include Soldering and Assembly Colour-blindness Numeracy and Literacy The Role You'll be working within a structured production environment on precision electronic and mechanical assemblies. This role requires strong attention to detail and the ability to work to defined quality and production standards. Key Responsibilities Soldering to a high standard Electronic and mechanical assembly (small-build work preferred) Working on a production line to meet output targets Operating within a secure and compliance-led environment Pay & Working Hours 18 per hour Rising to 19 per hour upon completion of performance targets Monday to Thursday 07:00 - 16:30 36 hours per week (9 hours per day including 30-minute unpaid break) Every Friday off Essential Experience Proven soldering experience Electronic and mechanical assembly background Production line experience Use of Hand Tools Contract Details Temporary assignment 20-week initial project Immediate starts available
May 17, 2026
Seasonal
Production Assembler - Electronics Coventry - Ansty Park 18 per hour, rising to 19 per hour 4-Day Working Week 20-Week Project Immediate Start Manpower is recruiting experienced Production Assemblers to join a secure, classified manufacturing project based in Coventry. These are temporary roles for an initial 20-week period, offering competitive pay and a 4-day working week. Screening & Vetting Requirements Due to the nature of this project, the following are mandatory: BPSS clearance UK Born nationals who still hold UK nationality only Trade Tests include Soldering and Assembly Colour-blindness Numeracy and Literacy The Role You'll be working within a structured production environment on precision electronic and mechanical assemblies. This role requires strong attention to detail and the ability to work to defined quality and production standards. Key Responsibilities Soldering to a high standard Electronic and mechanical assembly (small-build work preferred) Working on a production line to meet output targets Operating within a secure and compliance-led environment Pay & Working Hours 18 per hour Rising to 19 per hour upon completion of performance targets Monday to Thursday 07:00 - 16:30 36 hours per week (9 hours per day including 30-minute unpaid break) Every Friday off Essential Experience Proven soldering experience Electronic and mechanical assembly background Production line experience Use of Hand Tools Contract Details Temporary assignment 20-week initial project Immediate starts available
Mechanical Assembler salary 16.50 per hour or 31,746 annually + over time at 1.5 or x 2, Keynsham, BS31, 33 days holiday, pension, sick pay, parking, Monday to Friday 37 hour week, flexible start and finish times, Permanent role. An opportunity to join an established, friendly and stable manufacturing company as a mechanical fitter assembling special purpose machinery, working in a mechanical assembly workshop environment reporting to the mechanical team leader. The mechanical assembler, machine assembly role involves Build & install of mechanical sub assemblies in accordance with supplied engineering drawings and specification sheets. Complete work in a timely manner and to meet the machine build time line. mechanical bench fitting work Build of mechanical sub assemblies Set-up & alignment of machine frames and tooling Set-up machines to specified tolerances and capability Functional testing and fault finding Use of conventional hand and machine tools, any basic machining skills are useful Opportunities to support visits to customers to commission & test and set up machines The mechanical assembler or machine machine assembly position requirements are Ideally from a mechanical fitting or mechanical assembly background any knowledge of packaging industry would be of interest Would suit a candidate with attention to detail, some computer literacy Able to read engineering drawings and follow specification sheets A mechanical apprenticeship or technical training to City & Guilds or NVQ qualification or equivalent level is ideal but candidates who have experience through a time served route would also be of interest The mechanical assembler role is working with an established and friendly production engineering company on the outskirts of Bristol in Keynsham where you will get full product training and be an integral part of the team. Benefits Job title: mechanical assembler Salary: 16.50 per hour or 31,746 annually + over time at 1.5 or x 2 Benefits: 33 days holiday, pension, sick pay, parking Hours: Monday to Friday 37 hour week, flexible start and finish times Location: Keynsham, BS31 Duration: Permanent Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
May 17, 2026
Full time
Mechanical Assembler salary 16.50 per hour or 31,746 annually + over time at 1.5 or x 2, Keynsham, BS31, 33 days holiday, pension, sick pay, parking, Monday to Friday 37 hour week, flexible start and finish times, Permanent role. An opportunity to join an established, friendly and stable manufacturing company as a mechanical fitter assembling special purpose machinery, working in a mechanical assembly workshop environment reporting to the mechanical team leader. The mechanical assembler, machine assembly role involves Build & install of mechanical sub assemblies in accordance with supplied engineering drawings and specification sheets. Complete work in a timely manner and to meet the machine build time line. mechanical bench fitting work Build of mechanical sub assemblies Set-up & alignment of machine frames and tooling Set-up machines to specified tolerances and capability Functional testing and fault finding Use of conventional hand and machine tools, any basic machining skills are useful Opportunities to support visits to customers to commission & test and set up machines The mechanical assembler or machine machine assembly position requirements are Ideally from a mechanical fitting or mechanical assembly background any knowledge of packaging industry would be of interest Would suit a candidate with attention to detail, some computer literacy Able to read engineering drawings and follow specification sheets A mechanical apprenticeship or technical training to City & Guilds or NVQ qualification or equivalent level is ideal but candidates who have experience through a time served route would also be of interest The mechanical assembler role is working with an established and friendly production engineering company on the outskirts of Bristol in Keynsham where you will get full product training and be an integral part of the team. Benefits Job title: mechanical assembler Salary: 16.50 per hour or 31,746 annually + over time at 1.5 or x 2 Benefits: 33 days holiday, pension, sick pay, parking Hours: Monday to Friday 37 hour week, flexible start and finish times Location: Keynsham, BS31 Duration: Permanent Please apply for this role through the job board or apply direct to (url removed) or for further information, please call Adam on (phone number removed). Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
We're recruiting for a General Assembler to join a well-established engineering company within the HVAC sector. This is a hands-on role within a busy production team, building high-quality equipment to meet customer demand. Key Responsibilities: Mechanical and electrical assembly in line with production schedules Use of hand and air tools Product testing (where trained) Self-inspection and reporting faults Final inspection before packing Maintaining tools, equipment, and a clean workspace Following Health & Safety and ISO standards About You: Assembly experience (mechanical/electrical preferred) Confident using hand tools Good attention to detail Proactive and team-focused Electrical qualifications or forklift licence (advantageous) What's on offer: Overtime paid at enhanced rates (not regularly required) Company pension Free on-site parking You must be able to commute to High Wycombe and have the right to work in the UK. If you're looking for a stable, hands-on role in a supportive environment, please get in touch.
May 17, 2026
Full time
We're recruiting for a General Assembler to join a well-established engineering company within the HVAC sector. This is a hands-on role within a busy production team, building high-quality equipment to meet customer demand. Key Responsibilities: Mechanical and electrical assembly in line with production schedules Use of hand and air tools Product testing (where trained) Self-inspection and reporting faults Final inspection before packing Maintaining tools, equipment, and a clean workspace Following Health & Safety and ISO standards About You: Assembly experience (mechanical/electrical preferred) Confident using hand tools Good attention to detail Proactive and team-focused Electrical qualifications or forklift licence (advantageous) What's on offer: Overtime paid at enhanced rates (not regularly required) Company pension Free on-site parking You must be able to commute to High Wycombe and have the right to work in the UK. If you're looking for a stable, hands-on role in a supportive environment, please get in touch.
ASSEMBLY OPERATIVES REQUIRED - IMMEDIATE START - OWN TRANSPORT REQUIRED - STOWMARKET, SUFFOLK. We are looking for staff to work on a production line, using hand & power tools to assemble company products. Only basic assembly skills required & the ability to read & work from drawings. This is a permanent position after a successful 3-month trial. Assembler Duties: - As an assembler you will be required to read from drawings to create company products using hand & power tools Maintain consistent pace to ensure production isn't held up Responsible for picking parts to a pick list accurately Supporting the rest of the team by preparing parts for final dispatch Ideally you will have a manufacturing background with previous knowledge in a production / assembly line. Hours of work - 08:00-16:00 You must be competent with hand / power tools, able to follow drawings & instructions & work to your own initiative. The company are based in a rural location with no public transport access. You will need your own vehicle to get there. If you think this assembler role may be of interest but would like some further information, APPLY TODAY & Connor will be in touch!
May 17, 2026
Seasonal
ASSEMBLY OPERATIVES REQUIRED - IMMEDIATE START - OWN TRANSPORT REQUIRED - STOWMARKET, SUFFOLK. We are looking for staff to work on a production line, using hand & power tools to assemble company products. Only basic assembly skills required & the ability to read & work from drawings. This is a permanent position after a successful 3-month trial. Assembler Duties: - As an assembler you will be required to read from drawings to create company products using hand & power tools Maintain consistent pace to ensure production isn't held up Responsible for picking parts to a pick list accurately Supporting the rest of the team by preparing parts for final dispatch Ideally you will have a manufacturing background with previous knowledge in a production / assembly line. Hours of work - 08:00-16:00 You must be competent with hand / power tools, able to follow drawings & instructions & work to your own initiative. The company are based in a rural location with no public transport access. You will need your own vehicle to get there. If you think this assembler role may be of interest but would like some further information, APPLY TODAY & Connor will be in touch!
Cable Assembler Swindon £12.71 per hour We are looking for a skilled and detail-oriented Cable Assembler to join our client in Swindon. This is an excellent opportunity for someone with hands-on assembly experience who takes pride in producing high-quality work and enjoys working as part of a collaborative team. Cable Assembler Roles and Responsibilities: Assemble cable units in line with customer specifications and internal build standards Read and interpret technical drawings and build instructions Carry out soldering and crimping to a high standard Maintain high levels of quality and ensure compliance with ISO 9001 standards Work efficiently to meet production deadlines and delivery targets Use measuring tools accurately to ensure precision Follow company procedures, health & safety regulations, and environmental standards Contribute to continuous improvement initiatives and team objectives Cable Assembler Ideal Candidate: Experience within in cable assembly Ability to read and understand technical drawings Strong attention to detail and commitment to quality Experience with soldering and crimping techniques Cable Assembler Working Hours Monday - Thursday, 07:45 - 16:15 Friday, 07:45 - 15:15 Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
May 16, 2026
Seasonal
Cable Assembler Swindon £12.71 per hour We are looking for a skilled and detail-oriented Cable Assembler to join our client in Swindon. This is an excellent opportunity for someone with hands-on assembly experience who takes pride in producing high-quality work and enjoys working as part of a collaborative team. Cable Assembler Roles and Responsibilities: Assemble cable units in line with customer specifications and internal build standards Read and interpret technical drawings and build instructions Carry out soldering and crimping to a high standard Maintain high levels of quality and ensure compliance with ISO 9001 standards Work efficiently to meet production deadlines and delivery targets Use measuring tools accurately to ensure precision Follow company procedures, health & safety regulations, and environmental standards Contribute to continuous improvement initiatives and team objectives Cable Assembler Ideal Candidate: Experience within in cable assembly Ability to read and understand technical drawings Strong attention to detail and commitment to quality Experience with soldering and crimping techniques Cable Assembler Working Hours Monday - Thursday, 07:45 - 16:15 Friday, 07:45 - 15:15 Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.
Ernest Gordon Recruitment Limited
Stroud, Gloucestershire
Mechanical Fitter/Engineer (Training/progression) 35,000 ( 40,000 - 42,000 OTE) overtime + Progression + Training + Bonus Stroud Do you have a Mechanical Fitter or Engineer background or similar, looking for a new role with an expanding business, that will provide you with multiple routes of progression, access to regular overtime and bonuses to boost your annual income? On offer is the opportunity to join a market-leading business that supports your development through training and offers a clear path for career progression, giving you greater autonomy over your future. The company is globally recognised for delivering engineering solutions to a diverse client base, ranging from aviation to military sectors This is a hands-on, static role where you will help build, install, and maintain equipment fitted to a specialist vehicle. You will work with tools to assemble components such as pumps, valves, and pipework. Your role will also involve inspecting systems for faults, carrying out repairs, and ensuring everything operates smoothly. This role would suit someone with a Mechanical background or similar looking to join a company that will provide training to upskill ad offer multiple pathways of progression. The role Mechanical Assembly Carry out maintenance, fault-finding, and repair Static role The Person Commutable to stroud Mechanical background Reference BBBH25348 Mechanical fitter, Pneumatics, Hydraulics, Pipe, Mechanic, Plant Fitter, Pump Engineer, Automotive, Motors, Plumber, Agricultural, Plumbing Mechanical technician, Fluid System Technician, Maintenance Engineer, Stroud, Nailsworth, Gloucester, Dursley, Assembley, Assembler, Mechnical maintenance, Mechanical Engineer If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you
May 16, 2026
Full time
Mechanical Fitter/Engineer (Training/progression) 35,000 ( 40,000 - 42,000 OTE) overtime + Progression + Training + Bonus Stroud Do you have a Mechanical Fitter or Engineer background or similar, looking for a new role with an expanding business, that will provide you with multiple routes of progression, access to regular overtime and bonuses to boost your annual income? On offer is the opportunity to join a market-leading business that supports your development through training and offers a clear path for career progression, giving you greater autonomy over your future. The company is globally recognised for delivering engineering solutions to a diverse client base, ranging from aviation to military sectors This is a hands-on, static role where you will help build, install, and maintain equipment fitted to a specialist vehicle. You will work with tools to assemble components such as pumps, valves, and pipework. Your role will also involve inspecting systems for faults, carrying out repairs, and ensuring everything operates smoothly. This role would suit someone with a Mechanical background or similar looking to join a company that will provide training to upskill ad offer multiple pathways of progression. The role Mechanical Assembly Carry out maintenance, fault-finding, and repair Static role The Person Commutable to stroud Mechanical background Reference BBBH25348 Mechanical fitter, Pneumatics, Hydraulics, Pipe, Mechanic, Plant Fitter, Pump Engineer, Automotive, Motors, Plumber, Agricultural, Plumbing Mechanical technician, Fluid System Technician, Maintenance Engineer, Stroud, Nailsworth, Gloucester, Dursley, Assembley, Assembler, Mechnical maintenance, Mechanical Engineer If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
May 16, 2026
Full time
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Position: Cable Assembler Salary: 12.71 - 14.24 per hour Location: Northampton Proactive currently have an exciting opportunity for a Cable Assembler to begin work for a leading manufacturing and production business in Northampton. Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Cable Assembler to help ensure the quality and accuracy of the Site's function is well maintained throughout this new and excited influx of work. Key duties include: Wiring of cables and looms Crimping Testing and quality checking products Packing, labelling and stock control Reading technical drawings and work instructions Applying coatings and heat shrink General production and assembly tasks What we're looking for: Previous experience in cable assembly and basic wiring Good attention to detail Fine soldering experience preferred Ability to work independently and within a team Basic IT skills (Outlook, Word, Excel) Positive attitude and willingness to learn If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Cable Assembler Salary: 12.71 - 14.24 per hour Location: Northampton Proactive currently have an exciting opportunity for a Cable Assembler to begin work for a leading manufacturing and production business in Northampton. Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Cable Assembler to help ensure the quality and accuracy of the Site's function is well maintained throughout this new and excited influx of work. Key duties include: Wiring of cables and looms Crimping Testing and quality checking products Packing, labelling and stock control Reading technical drawings and work instructions Applying coatings and heat shrink General production and assembly tasks What we're looking for: Previous experience in cable assembly and basic wiring Good attention to detail Fine soldering experience preferred Ability to work independently and within a team Basic IT skills (Outlook, Word, Excel) Positive attitude and willingness to learn If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Electromechanical Assembler Pay Rate: £15.51ph PAYE or £21.72 Umbrella Location: Farnborough Employment Type: Contract/Temp to perm/long term contract About the Role We are seeking a skilled and detail oriented Electromechanical Assembler to join our growing manufacturing team in Farnborough. In this role, you will be responsible for the intricate assembly of components and will be putting your electromechanical assembly skills to excellent use. Key Responsibilities of the Electromechanical Assembler Perform intricate electromechanical assembly, working closely with different teams Diagnose faults and complete accurate assessments of required work Carry out component overhauls, adjustments, and lubrication Complete detailed assembly of small and delicate components for a manufacturing environment About the Electromechanical Assembler Previous experience as an Electromechanical Assembler or Technician Excellent attention to detail and strong manual dexterity Ability to work independently as well as part of a team A passion for precision engineering and high†quality workmanship Formal electromechanical or engineering training is highly beneficial but not essential What s on Offer for the Electromechanical Assembler £15.51ph Supportive and well equipped workshop environment Opportunities for training and skills development Long term contract/potential Temp to perm How to Apply If you re a dedicated Electromechanical Assembler ready for your next challenge, we d love to hear from you. INDMAN
May 16, 2026
Full time
Electromechanical Assembler Pay Rate: £15.51ph PAYE or £21.72 Umbrella Location: Farnborough Employment Type: Contract/Temp to perm/long term contract About the Role We are seeking a skilled and detail oriented Electromechanical Assembler to join our growing manufacturing team in Farnborough. In this role, you will be responsible for the intricate assembly of components and will be putting your electromechanical assembly skills to excellent use. Key Responsibilities of the Electromechanical Assembler Perform intricate electromechanical assembly, working closely with different teams Diagnose faults and complete accurate assessments of required work Carry out component overhauls, adjustments, and lubrication Complete detailed assembly of small and delicate components for a manufacturing environment About the Electromechanical Assembler Previous experience as an Electromechanical Assembler or Technician Excellent attention to detail and strong manual dexterity Ability to work independently as well as part of a team A passion for precision engineering and high†quality workmanship Formal electromechanical or engineering training is highly beneficial but not essential What s on Offer for the Electromechanical Assembler £15.51ph Supportive and well equipped workshop environment Opportunities for training and skills development Long term contract/potential Temp to perm How to Apply If you re a dedicated Electromechanical Assembler ready for your next challenge, we d love to hear from you. INDMAN
A manufacturer of automotive components is looking for an Assembler to join their growing team. Ideally you will have Assembly experience or come from a motor mechanic type background or maybe you have completed a manufacturing or engineering college course or similar equivalence. This is an exciting time to join a fast-growing company who have a fantastic working facility with a full order book. The company work on projects for ulta-high value automotive companies including Mercedes AMG-ONE, Pininfarina, Aston Martin, McLaren etc so you will be working on some exciting projects. If you want stability, this is the company to work for! There are 3 static shifts which are as follows:- 6am till 2.30pm Monday to Friday 8am to 4.30pm Monday to Friday 11.30am to 8pm Monday to Friday The hourly rate is 12.71ph There is free parking on site. Assembler Duties:- Assembling products to company standard Reporting defects to management Reviewing manufacturing documents Read from drawings Using hand and power tools Other tasks such as blocking up and packing goods as an example For the role you will need to have a good eye for detail, take pride in the quality of your work and be reliable. This is a temporary to permanent Assembler role. If you have any questions about the Assembly role or the company, please call Prime Appointments and ask for Simon. If you have assembly experience and are interested, please apply!
May 16, 2026
Seasonal
A manufacturer of automotive components is looking for an Assembler to join their growing team. Ideally you will have Assembly experience or come from a motor mechanic type background or maybe you have completed a manufacturing or engineering college course or similar equivalence. This is an exciting time to join a fast-growing company who have a fantastic working facility with a full order book. The company work on projects for ulta-high value automotive companies including Mercedes AMG-ONE, Pininfarina, Aston Martin, McLaren etc so you will be working on some exciting projects. If you want stability, this is the company to work for! There are 3 static shifts which are as follows:- 6am till 2.30pm Monday to Friday 8am to 4.30pm Monday to Friday 11.30am to 8pm Monday to Friday The hourly rate is 12.71ph There is free parking on site. Assembler Duties:- Assembling products to company standard Reporting defects to management Reviewing manufacturing documents Read from drawings Using hand and power tools Other tasks such as blocking up and packing goods as an example For the role you will need to have a good eye for detail, take pride in the quality of your work and be reliable. This is a temporary to permanent Assembler role. If you have any questions about the Assembly role or the company, please call Prime Appointments and ask for Simon. If you have assembly experience and are interested, please apply!
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
May 16, 2026
Full time
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
Ernest Gordon Recruitment Limited
Andover, Hampshire
Machine Operator (4 Days a Week / Late Shift) £29,000 - £30,500 + Overtime + Bonus + Life Assurance + Sick Pay + 4% Pension Andover, Hampshire Are you a Machine Operator from any manufacturing/production background to work just 4 days a week in a Monday to Thursday, evening shift role? Are you looking to work within a close-knit and friendly working environment for a rapidly expanding manufacturer, offering plenty of great benefits and a long-term career? In this role you will assembling electronic components using SMT, with full on-the-job training given. You will be pasting, printing, and loading the pick & place machine, plus interpreting customer drawings and conducting visual inspections of PCBs. Founded nearly 40 years ago, this manufacturer supplies their specialist products into industries such as aerospace, automotive, and medical, with trusted clients across the globe. They have experienced unprecedented growth over recent years and have a clear direction for the future with a new site opened recently. This role would suit someone who has operated any kind of machine within a manufacturing or production environment, looking to move into the electronics industry with full on-the-job training on SMT machinery in a long-term role. The Role: Assembling small electronic components using Surface Mount Technology machine Interpreting customer drawings Conducting inspections of PCBs Full on-the-job training given Monday to Thursday, 1pm - 11pm, 38 hours a week The Person: Machine Operator Manufacturing/Production background Looking to work evenings, 4 days a week Reference number: BBBH24962 Engineer, Engineering, Manufacturing, Production, Electronic, Electronics, PCB, Assembly, Operator, Operative, Test, Assembler, Manufacture, Andover, Hampshire, Tidworth, Winchester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 16, 2026
Full time
Machine Operator (4 Days a Week / Late Shift) £29,000 - £30,500 + Overtime + Bonus + Life Assurance + Sick Pay + 4% Pension Andover, Hampshire Are you a Machine Operator from any manufacturing/production background to work just 4 days a week in a Monday to Thursday, evening shift role? Are you looking to work within a close-knit and friendly working environment for a rapidly expanding manufacturer, offering plenty of great benefits and a long-term career? In this role you will assembling electronic components using SMT, with full on-the-job training given. You will be pasting, printing, and loading the pick & place machine, plus interpreting customer drawings and conducting visual inspections of PCBs. Founded nearly 40 years ago, this manufacturer supplies their specialist products into industries such as aerospace, automotive, and medical, with trusted clients across the globe. They have experienced unprecedented growth over recent years and have a clear direction for the future with a new site opened recently. This role would suit someone who has operated any kind of machine within a manufacturing or production environment, looking to move into the electronics industry with full on-the-job training on SMT machinery in a long-term role. The Role: Assembling small electronic components using Surface Mount Technology machine Interpreting customer drawings Conducting inspections of PCBs Full on-the-job training given Monday to Thursday, 1pm - 11pm, 38 hours a week The Person: Machine Operator Manufacturing/Production background Looking to work evenings, 4 days a week Reference number: BBBH24962 Engineer, Engineering, Manufacturing, Production, Electronic, Electronics, PCB, Assembly, Operator, Operative, Test, Assembler, Manufacture, Andover, Hampshire, Tidworth, Winchester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Ernest Gordon Recruitment Limited
Andover, Hampshire
Machine Operator (Early Shift) £25,500 - £26,000 + Overtime + 33 Days Holiday + Bonus + Life Assurance + Sick Pay + 4% Pension Andover, Hampshire Are you a Machine Operator from any manufacturing/production background looking to join an expanding, diverse business offering full on-the-job training on new machinery, within a friendly and collaborative working environment? In this role you will assembling electronic components using SMT, with full on-the-job training given. You will be pasting, printing, and loading the pick & place machine, plus interpreting customer drawings and conducting visual inspections of PCBs. Founded nearly 40 years ago, this manufacturer supplies their specialist products into industries such as aerospace, automotive, and medical, with trusted clients across the globe. They have experienced unprecedented growth over recent years and have a clear direction for the future with a new site opened recently. This role would suit someone who has operated any kind of machine within a manufacturing or production environment, looking to move into the electronics industry with full on-the-job training on SMT machinery in a long-term role. The Role: Assembling small electronic components using Surface Mount Technology machine Interpreting customer drawings Conducting inspections of PCBs Full on-the-job training given Monday to Thursday, 6am - 2:15pm, finish at 2pm on Friday, 38.5 hours a week The Person: Machine Operator Manufacturing/Production background Looking to work an early shift Reference number: BBBH24961 Engineer, Engineering, Manufacturing, Production, Electronic, Electronics, PCB, Assembly, Operator, Operative, Test, Assembler, Manufacture, Andover, Hampshire, Tidworth, Winchester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 16, 2026
Full time
Machine Operator (Early Shift) £25,500 - £26,000 + Overtime + 33 Days Holiday + Bonus + Life Assurance + Sick Pay + 4% Pension Andover, Hampshire Are you a Machine Operator from any manufacturing/production background looking to join an expanding, diverse business offering full on-the-job training on new machinery, within a friendly and collaborative working environment? In this role you will assembling electronic components using SMT, with full on-the-job training given. You will be pasting, printing, and loading the pick & place machine, plus interpreting customer drawings and conducting visual inspections of PCBs. Founded nearly 40 years ago, this manufacturer supplies their specialist products into industries such as aerospace, automotive, and medical, with trusted clients across the globe. They have experienced unprecedented growth over recent years and have a clear direction for the future with a new site opened recently. This role would suit someone who has operated any kind of machine within a manufacturing or production environment, looking to move into the electronics industry with full on-the-job training on SMT machinery in a long-term role. The Role: Assembling small electronic components using Surface Mount Technology machine Interpreting customer drawings Conducting inspections of PCBs Full on-the-job training given Monday to Thursday, 6am - 2:15pm, finish at 2pm on Friday, 38.5 hours a week The Person: Machine Operator Manufacturing/Production background Looking to work an early shift Reference number: BBBH24961 Engineer, Engineering, Manufacturing, Production, Electronic, Electronics, PCB, Assembly, Operator, Operative, Test, Assembler, Manufacture, Andover, Hampshire, Tidworth, Winchester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Position: Assembly Technician Location: Bishops Stortford Salary: 13.00ph - 14.56ph - Depending on experience Hours : Full Time - 37.5 hours per week - 08:00am - 16:00pm, Monday to Friday Proactive are currently in search of an experienced Electro Mechanical Assemblers to start work immediately for a client of ours in Bishops Stortford. The successful candidate will be working as part of a team within the production area, and should have previous assembly experience working within a faced paced manufacturing environment. Duties will include but not be limited to: Mechanical / Electro Assembly, involving wet and dry systems. Soldering & crimping. Use of hand tools, with some use of electrical hand tools Ability to be read wiring diagrams Ability to understand assembly diagrams Cooperate and work with all other production staff Ensure all operations are complete and done correctly How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Position: Assembly Technician Location: Bishops Stortford Salary: 13.00ph - 14.56ph - Depending on experience Hours : Full Time - 37.5 hours per week - 08:00am - 16:00pm, Monday to Friday Proactive are currently in search of an experienced Electro Mechanical Assemblers to start work immediately for a client of ours in Bishops Stortford. The successful candidate will be working as part of a team within the production area, and should have previous assembly experience working within a faced paced manufacturing environment. Duties will include but not be limited to: Mechanical / Electro Assembly, involving wet and dry systems. Soldering & crimping. Use of hand tools, with some use of electrical hand tools Ability to be read wiring diagrams Ability to understand assembly diagrams Cooperate and work with all other production staff Ensure all operations are complete and done correctly How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Assembly Technician (Full Time) Job details Job type Full-time Location Malmesbury SN16 Our client designs and manufactures agricultural machinery which is used all around the world. We're seeking an experienced Assembly Technician to join our production team - working to complete final assembly across our wide range of products with precision, care and efficiency. Skills required: Mechanical assembly & fitting - including of bearings, sprockets, gearboxes etc. Ability to read engineering drawings and technical diagrams Operation of hand and power tools Working to specified timescales and tolerances Attention to detail and ability to spot quality issues Knowledge of relevant safety standards Keenness and interest to learn and develop within the role A reasonable level of strength and fitness, as the role includes aspects of manual handling. Beneficial but not critical: Electrical assembly experience Crane certificate Scissor lift licence Forklift licence Competitive pay available with opportunities for overtime at 1.5x and productivity bonus. Job Type: Full-time Benefits: Company pension Application question(s): Please note there is limited public transport available to our site. Please confirm you have your own vehicle and are commute to SN16 Work authorisation: United Kingdom (required) Work Location: In person Further information is available on request. If you are interested please apply online to avoid missing out on this fantastic opportunity Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Full time
Assembly Technician (Full Time) Job details Job type Full-time Location Malmesbury SN16 Our client designs and manufactures agricultural machinery which is used all around the world. We're seeking an experienced Assembly Technician to join our production team - working to complete final assembly across our wide range of products with precision, care and efficiency. Skills required: Mechanical assembly & fitting - including of bearings, sprockets, gearboxes etc. Ability to read engineering drawings and technical diagrams Operation of hand and power tools Working to specified timescales and tolerances Attention to detail and ability to spot quality issues Knowledge of relevant safety standards Keenness and interest to learn and develop within the role A reasonable level of strength and fitness, as the role includes aspects of manual handling. Beneficial but not critical: Electrical assembly experience Crane certificate Scissor lift licence Forklift licence Competitive pay available with opportunities for overtime at 1.5x and productivity bonus. Job Type: Full-time Benefits: Company pension Application question(s): Please note there is limited public transport available to our site. Please confirm you have your own vehicle and are commute to SN16 Work authorisation: United Kingdom (required) Work Location: In person Further information is available on request. If you are interested please apply online to avoid missing out on this fantastic opportunity Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
