The Role We're looking for an experienced Automation Engineer to take ownership of site PLC software and electrical control systems for a food manufacturing facility. Reporting to the Site Engineering Manager, you'll be responsible for writing, maintaining, and troubleshooting automation systems while supporting and developing the wider engineering team. This role pays 55,000 and works Mon-Fri on 06:00-15:00. Key Responsibilities Writing, updating, and fault-finding PLC software and electrical systems (Siemens) Designing control panels, leading installations, and maintaining electrical drawings Delivering electrical improvement projects and liaising with OEMs Training and developing shift engineers and apprentices Maintaining software backups and producing user documentation Working in accordance with site H&S and hygiene policies What You'll Need Hands-on experience with Siemens, Allen Bradley, and Mitsubishi PLCs Programming and fault diagnosis of VSDs (SEW, Lenze, Siemens, Danfoss) Experience with motor control circuits Qualified Engineer (Electrical) with a higher engineering qualification Strong communicator, team player, able to work under pressure Desirable: Siemens Step 7, TIA Portal, WinCC, Safety ADR Specialists Ltd are an equal opportunity employer and operate as an Employment Business and Recruitment Agency.
May 20, 2026
Full time
The Role We're looking for an experienced Automation Engineer to take ownership of site PLC software and electrical control systems for a food manufacturing facility. Reporting to the Site Engineering Manager, you'll be responsible for writing, maintaining, and troubleshooting automation systems while supporting and developing the wider engineering team. This role pays 55,000 and works Mon-Fri on 06:00-15:00. Key Responsibilities Writing, updating, and fault-finding PLC software and electrical systems (Siemens) Designing control panels, leading installations, and maintaining electrical drawings Delivering electrical improvement projects and liaising with OEMs Training and developing shift engineers and apprentices Maintaining software backups and producing user documentation Working in accordance with site H&S and hygiene policies What You'll Need Hands-on experience with Siemens, Allen Bradley, and Mitsubishi PLCs Programming and fault diagnosis of VSDs (SEW, Lenze, Siemens, Danfoss) Experience with motor control circuits Qualified Engineer (Electrical) with a higher engineering qualification Strong communicator, team player, able to work under pressure Desirable: Siemens Step 7, TIA Portal, WinCC, Safety ADR Specialists Ltd are an equal opportunity employer and operate as an Employment Business and Recruitment Agency.
We are recruiting for a skilled Mechanical Fitter to join a fast moving manufacturing business where reliability, quality, and efficiency are critical to daily operations. This is a hands-on role suited to someone with strong mechanical assembly and fitting experience who can work from engineering drawings, support production targets, and help maintain high standards of safety and workmanship in a busy factory environment. Roles & Responsibilities Assemble, fit, and install mechanical components, machinery, and production equipment to specification. Read and interpret engineering drawings, schematics, and technical instructions to complete builds accurately. Carry out mechanical repairs, adjustments, and fault finding to minimise downtime and keep production moving. Support planned maintenance, machine changeovers, and equipment improvement activities across the manufacturing operation. Use hand tools, power tools, measuring equipment, and workshop machinery safely and effectively. Work closely with production, maintenance, and engineering teams to resolve mechanical issues quickly and efficiently. Ensure all work is completed to quality standards, within agreed timescales, and in line with health and safety procedures. Maintain accurate job records, report parts or tooling requirements, and contribute to continuous improvement initiatives. Proven experience in a Mechanical Fitter, Mechanical Assembler, Maintenance Fitter, or similar manufacturing role. Ability to read and work from engineering drawings and technical documentation. Strong mechanical aptitude with experience of assembly, fitting, maintenance, and fault finding. Comfortable working in a fast paced manufacturing or production environment with changing priorities. Good understanding of health and safety requirements and safe systems of work. Reliable, proactive, and able to work independently as well as part of a team. Apprenticeship, NVQ, City & Guilds, or equivalent engineering qualification would be advantageous. The Ideal Candidate Proven experience in a Mechanical Fitter, Mechanical Assembler, Maintenance Fitter, or similar manufacturing role. Ability to read and work from engineering drawings and technical documentation. Strong mechanical aptitude with experience of assembly, fitting, maintenance, and fault finding. Comfortable working in a fast paced manufacturing or production environment with changing priorities. Good understanding of health and safety requirements and safe systems of work. Reliable, proactive, and able to work independently as well as part of a team. Apprenticeship, NVQ, City & Guilds, or equivalent engineering qualification would be advantageous.
May 20, 2026
Full time
We are recruiting for a skilled Mechanical Fitter to join a fast moving manufacturing business where reliability, quality, and efficiency are critical to daily operations. This is a hands-on role suited to someone with strong mechanical assembly and fitting experience who can work from engineering drawings, support production targets, and help maintain high standards of safety and workmanship in a busy factory environment. Roles & Responsibilities Assemble, fit, and install mechanical components, machinery, and production equipment to specification. Read and interpret engineering drawings, schematics, and technical instructions to complete builds accurately. Carry out mechanical repairs, adjustments, and fault finding to minimise downtime and keep production moving. Support planned maintenance, machine changeovers, and equipment improvement activities across the manufacturing operation. Use hand tools, power tools, measuring equipment, and workshop machinery safely and effectively. Work closely with production, maintenance, and engineering teams to resolve mechanical issues quickly and efficiently. Ensure all work is completed to quality standards, within agreed timescales, and in line with health and safety procedures. Maintain accurate job records, report parts or tooling requirements, and contribute to continuous improvement initiatives. Proven experience in a Mechanical Fitter, Mechanical Assembler, Maintenance Fitter, or similar manufacturing role. Ability to read and work from engineering drawings and technical documentation. Strong mechanical aptitude with experience of assembly, fitting, maintenance, and fault finding. Comfortable working in a fast paced manufacturing or production environment with changing priorities. Good understanding of health and safety requirements and safe systems of work. Reliable, proactive, and able to work independently as well as part of a team. Apprenticeship, NVQ, City & Guilds, or equivalent engineering qualification would be advantageous. The Ideal Candidate Proven experience in a Mechanical Fitter, Mechanical Assembler, Maintenance Fitter, or similar manufacturing role. Ability to read and work from engineering drawings and technical documentation. Strong mechanical aptitude with experience of assembly, fitting, maintenance, and fault finding. Comfortable working in a fast paced manufacturing or production environment with changing priorities. Good understanding of health and safety requirements and safe systems of work. Reliable, proactive, and able to work independently as well as part of a team. Apprenticeship, NVQ, City & Guilds, or equivalent engineering qualification would be advantageous.
The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. CNC Machinist - Night shift - Cwmbran In the UK, Safran Seats specialises solely in the First Class and Business Class seating markets for wide body aircraft, with industrial and engineering teams in Cwmbran and Newport, Wales and Brackley, England. The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Key Responsibilities will include: -Download programs from the file server -Setup CNC tooling assemblies and maintain tool management system -Setup and run CNC machining centres -Prove out new NPI programs -Use Vernier's, thread gauges, plug gauges and other inspection equipment to monitor tolerance requirements as defined in the engineering data. -Perform daily / weekly maintenance tasks in accordance with machine centre maintenance plan -Maintain safe operations by adhering to safety procedures and regulations. -Participate in continuous improvement activities -Complete all necessary paper work as required. -Routine machine side OEE data entry -Work with production manager & programming team to seek opportunities to improve processes and reduce cycle times -Support team colleagues -Maintain good housekeeping in accordance with 5S processes and practices -Take responsibility for quality of own output -Perform other tasks as reasonably requested by your production manager. What We'll Offer As a valued member of our team, these are just a few of the benefits you'll receive: 33 days holiday (including bank holidays) Industry leading pension scheme with salary sacrifice employer contributions up to 10%. Private medical cover (to include Digital GP and rapid access Physio with no excess) with ability to upgrade level of benefit and cover family members. Access to salary sacrifice benefits scheme including cycle to work and Octopus EV Scheme 4 x Life Assurance Interactive benefits platform including wide range of discretionary benefits including technology, retail benefits, income protection. Enhanced family friendly policies and benefits (enhanced maternity and paternity leave) and employee assistance programme Annual share save schemes. Option for hybrid and flexible working arrangements Opportunities for career advancement and personal growth. Benefit from support through Safran University and our internal Training and Development Schools Get involved in our corporate social responsibility activities from sustainability initiatives, charity and fundraising, volunteering days, or supporting STEM activities at local schools and colleges nurturing the next generation of talent Please apply and submit your CV today! Once your CV has been reviewed, we will contact you with the next stages. This role is subject to pre-employment checks, including but not limited to criminal record checks. While having unspent convictions may not necessarily prevent you from being employed, you are required to disclose any unspent convictions during the recruitment process. Only candidates who successfully pass these checks will be considered for employment. We are committed to building a workforce that is reflective of the diverse community we serve. We want to attract the best applications from people of all backgrounds and underrepresented groups because we strongly believe in adding value through diversity, inclusion. Our employees enable us to deliver services that are accessible and inclusive. As part of our commitment with Disability Confident Employers, we may offer a guaranteed interview to applicants who meet the essential criteria for the post. We strive to provide reasonable adjustments throughout the recruitment process and employment. Let us know if you need support to showcase your talents or require any reasonable adjustments with your application. We're committed to building a strong, diverse workforce and making Safran Seats an inclusive place to work. Candidate skills: -Indentured apprentice or equivalent modern apprenticeship. -Experienced in setting and running 3 axis & 5 axis vertical machining centres and CNC lathes. -Experience with manual mills and manual lathes. -NVQ Level 2+3 Mechanical Engineering or BTEC National Diploma Mechanical Engineering (or equivalent). -Ability to use a wide range of IMTE for inspection of completed components. -Quality focused with strong attention to detail; willing to support continuous improvement. No candidate will meet every single desired qualification. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to hear from you! Our employees are at the heart of our success, as we work together for our sustainable future. There are four People Fundamentals that underpin life at Safran: We believe in and promote diversity and inclusion as key values across our business We develop our colleagues skills and build opportunities so you can shape our future We create a trustworthy work place to support you, as you dare to act and innovate We encourage collaboration and mutual support for you and your colleagues
May 20, 2026
Full time
The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Seats is one of the world's leading manufacturers of aircraft seats, for both crew and passengers. 1 million Safran Seats-manufactured aircraft seats are currently in service with air fleets around the world. CNC Machinist - Night shift - Cwmbran In the UK, Safran Seats specialises solely in the First Class and Business Class seating markets for wide body aircraft, with industrial and engineering teams in Cwmbran and Newport, Wales and Brackley, England. The purpose of this role is the manufacture of machined components by setting and operating CNC lathes and various 3 & 5 axis vertical machining centres (night shift). Maintain quality through routine in process checks and adherence to all HSE requirements as per defined standards. Key Responsibilities will include: -Download programs from the file server -Setup CNC tooling assemblies and maintain tool management system -Setup and run CNC machining centres -Prove out new NPI programs -Use Vernier's, thread gauges, plug gauges and other inspection equipment to monitor tolerance requirements as defined in the engineering data. -Perform daily / weekly maintenance tasks in accordance with machine centre maintenance plan -Maintain safe operations by adhering to safety procedures and regulations. -Participate in continuous improvement activities -Complete all necessary paper work as required. -Routine machine side OEE data entry -Work with production manager & programming team to seek opportunities to improve processes and reduce cycle times -Support team colleagues -Maintain good housekeeping in accordance with 5S processes and practices -Take responsibility for quality of own output -Perform other tasks as reasonably requested by your production manager. What We'll Offer As a valued member of our team, these are just a few of the benefits you'll receive: 33 days holiday (including bank holidays) Industry leading pension scheme with salary sacrifice employer contributions up to 10%. Private medical cover (to include Digital GP and rapid access Physio with no excess) with ability to upgrade level of benefit and cover family members. Access to salary sacrifice benefits scheme including cycle to work and Octopus EV Scheme 4 x Life Assurance Interactive benefits platform including wide range of discretionary benefits including technology, retail benefits, income protection. Enhanced family friendly policies and benefits (enhanced maternity and paternity leave) and employee assistance programme Annual share save schemes. Option for hybrid and flexible working arrangements Opportunities for career advancement and personal growth. Benefit from support through Safran University and our internal Training and Development Schools Get involved in our corporate social responsibility activities from sustainability initiatives, charity and fundraising, volunteering days, or supporting STEM activities at local schools and colleges nurturing the next generation of talent Please apply and submit your CV today! Once your CV has been reviewed, we will contact you with the next stages. This role is subject to pre-employment checks, including but not limited to criminal record checks. While having unspent convictions may not necessarily prevent you from being employed, you are required to disclose any unspent convictions during the recruitment process. Only candidates who successfully pass these checks will be considered for employment. We are committed to building a workforce that is reflective of the diverse community we serve. We want to attract the best applications from people of all backgrounds and underrepresented groups because we strongly believe in adding value through diversity, inclusion. Our employees enable us to deliver services that are accessible and inclusive. As part of our commitment with Disability Confident Employers, we may offer a guaranteed interview to applicants who meet the essential criteria for the post. We strive to provide reasonable adjustments throughout the recruitment process and employment. Let us know if you need support to showcase your talents or require any reasonable adjustments with your application. We're committed to building a strong, diverse workforce and making Safran Seats an inclusive place to work. Candidate skills: -Indentured apprentice or equivalent modern apprenticeship. -Experienced in setting and running 3 axis & 5 axis vertical machining centres and CNC lathes. -Experience with manual mills and manual lathes. -NVQ Level 2+3 Mechanical Engineering or BTEC National Diploma Mechanical Engineering (or equivalent). -Ability to use a wide range of IMTE for inspection of completed components. -Quality focused with strong attention to detail; willing to support continuous improvement. No candidate will meet every single desired qualification. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to hear from you! Our employees are at the heart of our success, as we work together for our sustainable future. There are four People Fundamentals that underpin life at Safran: We believe in and promote diversity and inclusion as key values across our business We develop our colleagues skills and build opportunities so you can shape our future We create a trustworthy work place to support you, as you dare to act and innovate We encourage collaboration and mutual support for you and your colleagues
We are recruiting for a Site Services Engineer to support the operation, maintenance, and continuous improvement of electrical power distribution systems across a busy industrial site environment. This is a hands-on engineering role focused on ensuring reliability, safety, and efficiency of site-wide electrical infrastructure and associated services. The successful candidate will work closely with maintenance, operations, and aftersales support to deliver planned and reactive engineering support while driving high standards of compliance and operational performance. Key Responsibilities: Carry out maintenance, inspection, fault finding, and repair activities on site electrical distribution systems. Support the safe operation of LV and HV electrical infrastructure across the facility. Diagnose electrical faults and implement effective corrective actions to minimise downtime. Assist with planned shutdowns, upgrades, and improvement projects. Monitor system performance and recommend reliability and efficiency improvements. Ensure all work is completed in line with health & safety regulations and site procedures. Coordinate with contractors and external service providers where required. Maintain accurate maintenance records, reports, and documentation. Support continuous improvement initiatives across engineering and utilities operations. Participate in call-out and emergency response activities when necessary. Skills and Qualifications: HNC/HND or Apprentice-trained in Electrical Engineering or related discipline. Experience working within industrial, manufacturing, energy, utilities, or heavy engineering environments. Strong understanding of electrical power distribution systems and associated equipment. Experience with fault diagnosis, preventative maintenance, and system troubleshooting. Knowledge of electrical safety standards, isolation procedures, and permit-to-work systems. Ability to read and interpret electrical drawings and technical documentation. Familiarity with CMMS or maintenance management systems. Proactive approach to problem solving and continuous improvement.
May 20, 2026
Full time
We are recruiting for a Site Services Engineer to support the operation, maintenance, and continuous improvement of electrical power distribution systems across a busy industrial site environment. This is a hands-on engineering role focused on ensuring reliability, safety, and efficiency of site-wide electrical infrastructure and associated services. The successful candidate will work closely with maintenance, operations, and aftersales support to deliver planned and reactive engineering support while driving high standards of compliance and operational performance. Key Responsibilities: Carry out maintenance, inspection, fault finding, and repair activities on site electrical distribution systems. Support the safe operation of LV and HV electrical infrastructure across the facility. Diagnose electrical faults and implement effective corrective actions to minimise downtime. Assist with planned shutdowns, upgrades, and improvement projects. Monitor system performance and recommend reliability and efficiency improvements. Ensure all work is completed in line with health & safety regulations and site procedures. Coordinate with contractors and external service providers where required. Maintain accurate maintenance records, reports, and documentation. Support continuous improvement initiatives across engineering and utilities operations. Participate in call-out and emergency response activities when necessary. Skills and Qualifications: HNC/HND or Apprentice-trained in Electrical Engineering or related discipline. Experience working within industrial, manufacturing, energy, utilities, or heavy engineering environments. Strong understanding of electrical power distribution systems and associated equipment. Experience with fault diagnosis, preventative maintenance, and system troubleshooting. Knowledge of electrical safety standards, isolation procedures, and permit-to-work systems. Ability to read and interpret electrical drawings and technical documentation. Familiarity with CMMS or maintenance management systems. Proactive approach to problem solving and continuous improvement.
Role Information Electrical Fitter Salary 34,000 Merthyr Tydfil South Wales Onsite role Starting July 2026 Why join Marshall Land Systems in this role: The Electrical Fitter is responsible for the installation, assembly, and integration of electrical systems and components within specialist manufactured products. Working within a production environment, the role ensures electrical installations are completed safely, efficiently, and in accordance with engineering drawings, technical specifications, and quality standards. The Electrical Fitter contributes directly to achieving Safety, Quality, Cost, Delivery, and People (SQCDP) objectives by delivering high-quality electrical builds that meet production schedules and customer requirements. Working as part of a multidisciplinary production team, the Electrical Fitter ensures all work is carried out to the highest professional and technical standards while maintaining a strong focus on safety and continuous improvement. Your responsibilities in this role include: Install electrical systems, wiring looms, harnesses, and components in accordance with engineering drawings, build documentation, and work instructions. Carry out electrical assembly, routing, termination, and connection of wiring and electrical equipment. Support the integration of electrical systems into mechanical assemblies and vehicle platforms where applicable. Ensure all work is completed in line with the agreed production schedule and daily build plan. Use appropriate hand tools, electrical test equipment, and assembly equipment safely and effectively. Identify and report build issues, defects, or deviations from specification to the Team Leader or Supervisor. Assist with electrical fault finding and rectification during build and test activities. Ensure all electrical work is completed to a high standard and ready for inspection or testing. Carry out all tasks in accordance with safe systems of work and health and safety procedures. Ensure appropriate use of Personal Protective Equipment (PPE) at all times. Identify hazards and report any unsafe conditions, incidents, or near misses. Maintain a safe, clean, and organised working environment in line with 5S principles. Support the company's commitment to maintaining a safe production environment. Ensure electrical installations comply with engineering drawings, technical specifications, and company standards. Complete all build documentation, check sheets, and quality records accurately. Support quality inspections and testing processes. Identify non-conformances and assist with corrective actions where required. Maintain high standards of workmanship to ensure right-first-time build quality. Actively support continuous improvement initiatives within the production environment. Identify opportunities to improve electrical installation processes, efficiency, and build quality. Participate in Lean activities including 5S, standard work, and waste reduction initiatives. Support improvements that enhance safety, productivity, and delivery performance. Carry out electrical installation work within the scope of approved engineering documentation. Raise technical or quality concerns to the Team Leader or Supervisor where required. Provide feedback on build processes and potential improvements. Support resolution of electrical issues during production builds. Apply if you have most of the following; Experience working in a manufacturing, assembly, or vehicle build environment. Practical experience installing electrical systems, harnesses, and components. Experience interpreting electrical drawings and schematics. Experience working within a regulated or quality-controlled production environment - desirable. Technical skills/qualifications: Recognised apprenticeship in Electrical Engineering, Electrical Installation, or similar discipline - desirable. City & Guilds or NVQ Level 3 in Electrical Engineering or Electrical Installation - desirable. Relevant electrical safety training - desirable. Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.
May 20, 2026
Full time
Role Information Electrical Fitter Salary 34,000 Merthyr Tydfil South Wales Onsite role Starting July 2026 Why join Marshall Land Systems in this role: The Electrical Fitter is responsible for the installation, assembly, and integration of electrical systems and components within specialist manufactured products. Working within a production environment, the role ensures electrical installations are completed safely, efficiently, and in accordance with engineering drawings, technical specifications, and quality standards. The Electrical Fitter contributes directly to achieving Safety, Quality, Cost, Delivery, and People (SQCDP) objectives by delivering high-quality electrical builds that meet production schedules and customer requirements. Working as part of a multidisciplinary production team, the Electrical Fitter ensures all work is carried out to the highest professional and technical standards while maintaining a strong focus on safety and continuous improvement. Your responsibilities in this role include: Install electrical systems, wiring looms, harnesses, and components in accordance with engineering drawings, build documentation, and work instructions. Carry out electrical assembly, routing, termination, and connection of wiring and electrical equipment. Support the integration of electrical systems into mechanical assemblies and vehicle platforms where applicable. Ensure all work is completed in line with the agreed production schedule and daily build plan. Use appropriate hand tools, electrical test equipment, and assembly equipment safely and effectively. Identify and report build issues, defects, or deviations from specification to the Team Leader or Supervisor. Assist with electrical fault finding and rectification during build and test activities. Ensure all electrical work is completed to a high standard and ready for inspection or testing. Carry out all tasks in accordance with safe systems of work and health and safety procedures. Ensure appropriate use of Personal Protective Equipment (PPE) at all times. Identify hazards and report any unsafe conditions, incidents, or near misses. Maintain a safe, clean, and organised working environment in line with 5S principles. Support the company's commitment to maintaining a safe production environment. Ensure electrical installations comply with engineering drawings, technical specifications, and company standards. Complete all build documentation, check sheets, and quality records accurately. Support quality inspections and testing processes. Identify non-conformances and assist with corrective actions where required. Maintain high standards of workmanship to ensure right-first-time build quality. Actively support continuous improvement initiatives within the production environment. Identify opportunities to improve electrical installation processes, efficiency, and build quality. Participate in Lean activities including 5S, standard work, and waste reduction initiatives. Support improvements that enhance safety, productivity, and delivery performance. Carry out electrical installation work within the scope of approved engineering documentation. Raise technical or quality concerns to the Team Leader or Supervisor where required. Provide feedback on build processes and potential improvements. Support resolution of electrical issues during production builds. Apply if you have most of the following; Experience working in a manufacturing, assembly, or vehicle build environment. Practical experience installing electrical systems, harnesses, and components. Experience interpreting electrical drawings and schematics. Experience working within a regulated or quality-controlled production environment - desirable. Technical skills/qualifications: Recognised apprenticeship in Electrical Engineering, Electrical Installation, or similar discipline - desirable. City & Guilds or NVQ Level 3 in Electrical Engineering or Electrical Installation - desirable. Relevant electrical safety training - desirable. Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.
Multi-Skilled Engineer Location - North Lincolnshire Salary - 51,000 Shift Pattern - 4 on 4 off Days and Nights. I am recruiting for an FMCG Manufacturer in North Lincolnshire with their search for a Multi-Skilled Engineer. If you are an Electrical bias engineer with seasoned experience in the industry, this role could be for you! You will be doing reactive and preventative maintenance on various machinery, and implementing continuous improvement at every stage to keep production running for the future. Key Responsibilities: Carry out fault diagnosis and repairs across electrical and mechanical systems to minimise production downtime Take a hands-on approach in both scheduled maintenance and immediate breakdown response Maintain, optimise, and repair a range of equipment including slicing systems, seasoning units, conveyors, and automated packaging lines Participate in ongoing improvement initiatives to increase machine efficiency and reduce unplanned stoppages Work closely with operations and production teams to ensure smooth running of equipment and minimal disruption Ensure compliance with health & safety and internal maintenance procedures at all times Skills & Experience Required: Strong hands-on experience working with both electrical and mechanical systems in a manufacturing or production setting Relevant engineering qualification - such as NVQ Level 3, BTEC, HNC/HND or equivalent apprenticeship Experience in a similar role such as (multi skilled engineer, shift engineer, shift technician, engineering technician, electrical maintenance engineer) Practical knowledge of maintaining and troubleshooting automated machinery - particularly in packaging or food processing environments (preferred but not essential) Confidence in reacting to breakdowns as well as carrying out preventative maintenance tasks If this position could be of interest, please apply or reach out to (url removed) for more information.
May 20, 2026
Full time
Multi-Skilled Engineer Location - North Lincolnshire Salary - 51,000 Shift Pattern - 4 on 4 off Days and Nights. I am recruiting for an FMCG Manufacturer in North Lincolnshire with their search for a Multi-Skilled Engineer. If you are an Electrical bias engineer with seasoned experience in the industry, this role could be for you! You will be doing reactive and preventative maintenance on various machinery, and implementing continuous improvement at every stage to keep production running for the future. Key Responsibilities: Carry out fault diagnosis and repairs across electrical and mechanical systems to minimise production downtime Take a hands-on approach in both scheduled maintenance and immediate breakdown response Maintain, optimise, and repair a range of equipment including slicing systems, seasoning units, conveyors, and automated packaging lines Participate in ongoing improvement initiatives to increase machine efficiency and reduce unplanned stoppages Work closely with operations and production teams to ensure smooth running of equipment and minimal disruption Ensure compliance with health & safety and internal maintenance procedures at all times Skills & Experience Required: Strong hands-on experience working with both electrical and mechanical systems in a manufacturing or production setting Relevant engineering qualification - such as NVQ Level 3, BTEC, HNC/HND or equivalent apprenticeship Experience in a similar role such as (multi skilled engineer, shift engineer, shift technician, engineering technician, electrical maintenance engineer) Practical knowledge of maintaining and troubleshooting automated machinery - particularly in packaging or food processing environments (preferred but not essential) Confidence in reacting to breakdowns as well as carrying out preventative maintenance tasks If this position could be of interest, please apply or reach out to (url removed) for more information.
GMP Recruitment Agency Ltd are proud to be working in partnership with a highly reputable, multinational organisation to recruit an experienced CNC Miller for their Gloucester based facility. CNC 3 and 5 axis Miller Salary: 24.00 per hr Shift Pattern: days Monday to Friday 8 am to 4pm Benefits: 25 Days Annual Leave plus Bank Holidays. Life Assurance. Company Pension beginning at 9%. All over time at time and a half We are looking for a CNC Milling setter operator The appropriate candidate would be responsible for setting and operating CNC 5 axis Milling machine with Mazatrol control machining precision component to tight tolerances. Responsibilities of CNC miller Machining Operations: Set up, operate, and run CNC machining processes on 5-axis machining centres and operate other machines when required. Process Setup: Carry out all setups for products routed through the machining process. Design Input: Provide advice on the design of fixtures, programs, and tools relevant to the machining processes. Training: Train and guide operators in machine operation and inspection criteria. Quality: Conduct self-inspections and complete necessary quality audits to obtain self-certification inspection stamps. Documentation: Work from approved engineering drawings, inspection plans, and shop documentation, accurately recording required data. Maintenance: Perform basic preventative maintenance on machinery as per company policy. Key Skills and experience: Reasonable standard of secondary education. Experience with 3 and 5 axis machining centres Mazak mazatrol J500 J600 i(Apply online only) A recognized apprenticeship in machining or a related field. Previous experience in engineering or manufacturing role as a CNC setter Ability to work independently and as part of a team. Ability to problem solve and use own initiative, working to extremely tight tolerances (+-0.010mm) Flexibility and a positive attitude towards manufacturing tools and techniques Strong timekeeping and attendance record. GMP Recruitment Agency Ltd are recruiting for this role on behalf of their client and are acting as an employment agency Benefits: On-site parking Work Location: In person
May 20, 2026
Full time
GMP Recruitment Agency Ltd are proud to be working in partnership with a highly reputable, multinational organisation to recruit an experienced CNC Miller for their Gloucester based facility. CNC 3 and 5 axis Miller Salary: 24.00 per hr Shift Pattern: days Monday to Friday 8 am to 4pm Benefits: 25 Days Annual Leave plus Bank Holidays. Life Assurance. Company Pension beginning at 9%. All over time at time and a half We are looking for a CNC Milling setter operator The appropriate candidate would be responsible for setting and operating CNC 5 axis Milling machine with Mazatrol control machining precision component to tight tolerances. Responsibilities of CNC miller Machining Operations: Set up, operate, and run CNC machining processes on 5-axis machining centres and operate other machines when required. Process Setup: Carry out all setups for products routed through the machining process. Design Input: Provide advice on the design of fixtures, programs, and tools relevant to the machining processes. Training: Train and guide operators in machine operation and inspection criteria. Quality: Conduct self-inspections and complete necessary quality audits to obtain self-certification inspection stamps. Documentation: Work from approved engineering drawings, inspection plans, and shop documentation, accurately recording required data. Maintenance: Perform basic preventative maintenance on machinery as per company policy. Key Skills and experience: Reasonable standard of secondary education. Experience with 3 and 5 axis machining centres Mazak mazatrol J500 J600 i(Apply online only) A recognized apprenticeship in machining or a related field. Previous experience in engineering or manufacturing role as a CNC setter Ability to work independently and as part of a team. Ability to problem solve and use own initiative, working to extremely tight tolerances (+-0.010mm) Flexibility and a positive attitude towards manufacturing tools and techniques Strong timekeeping and attendance record. GMP Recruitment Agency Ltd are recruiting for this role on behalf of their client and are acting as an employment agency Benefits: On-site parking Work Location: In person
On behalf of our client, we are seeking to recruit several Mechanical Fitter to join on an initial 12-month contract. As a Mechanical Fitter you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Mechanical Fitter Pay: 28.35 Per hour via Umbrella rate Contract: Monday to Friday, 37 Hours a week,12-month contract Location: Filton IR35 Status: Inside Security Clearance: BPSS Start however will required to gain SC Clearance Responsibilities Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Education/Essential Experince Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. Significant mechanical fitting experience required - the work at at a fine detailed level, so any experience with intricate work If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
May 20, 2026
Contractor
On behalf of our client, we are seeking to recruit several Mechanical Fitter to join on an initial 12-month contract. As a Mechanical Fitter you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Mechanical Fitter Pay: 28.35 Per hour via Umbrella rate Contract: Monday to Friday, 37 Hours a week,12-month contract Location: Filton IR35 Status: Inside Security Clearance: BPSS Start however will required to gain SC Clearance Responsibilities Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Education/Essential Experince Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. Significant mechanical fitting experience required - the work at at a fine detailed level, so any experience with intricate work If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
A leading provider of innovative technologies which enhances productivity and quality in sophisticated industrial processes is now looking for Key Account Managers to support the UK and Ireland territory. Working from home, and reporting to the Sales Manager, you will be responsible for the full sales life cycle. Providing support and advise to key strategic customers in the Refrigeration, Automotive and Industrial Leak Detection. Working with the EMEA Sales Team on Strategic accounts, you will support marketing activities including attending trade shows, strategic industry committees, and marketing campaigns. You will manage customers based across the whole of UK and Ireland. Therefore, you should be willing and able to commit to regular travel and stays away from home. This is an excellent opportunity for a commercially or technically minded sales professional currently working in the field of automotive or automation (System Integration) to advance their career with an innovative market leading global organisation. Experience and Qualifications: To succeed in this role, you should have completed a formal qualification in Engineering or similar discipline, e.g. Degree, or Apprenticeship. It is expected that you will come from a similar technical environment, where you have worked with gas leak detection systems. Candidates with a strong technical background in these fields and a desire to move into a more customers facing sales role are welcome to apply. Additional Information: Candidates must be resident in the UK and eligible to live and work in the UK without ever requiring sponsorship. Copies of Passports and Visas will be requested for verification purposes. Candidates must hold a full clean UK driving licence. Salary: 50-70k plus commission, profit share, car Job Term: Permanent / Full Time Skills: Leak Detection, Automotive, Automation, Refrigeration, Air Conditioning, Manufacturing, Vacuum To Apply Direct: Please email your CV and covering letter to Iona Mulligan
May 20, 2026
Full time
A leading provider of innovative technologies which enhances productivity and quality in sophisticated industrial processes is now looking for Key Account Managers to support the UK and Ireland territory. Working from home, and reporting to the Sales Manager, you will be responsible for the full sales life cycle. Providing support and advise to key strategic customers in the Refrigeration, Automotive and Industrial Leak Detection. Working with the EMEA Sales Team on Strategic accounts, you will support marketing activities including attending trade shows, strategic industry committees, and marketing campaigns. You will manage customers based across the whole of UK and Ireland. Therefore, you should be willing and able to commit to regular travel and stays away from home. This is an excellent opportunity for a commercially or technically minded sales professional currently working in the field of automotive or automation (System Integration) to advance their career with an innovative market leading global organisation. Experience and Qualifications: To succeed in this role, you should have completed a formal qualification in Engineering or similar discipline, e.g. Degree, or Apprenticeship. It is expected that you will come from a similar technical environment, where you have worked with gas leak detection systems. Candidates with a strong technical background in these fields and a desire to move into a more customers facing sales role are welcome to apply. Additional Information: Candidates must be resident in the UK and eligible to live and work in the UK without ever requiring sponsorship. Copies of Passports and Visas will be requested for verification purposes. Candidates must hold a full clean UK driving licence. Salary: 50-70k plus commission, profit share, car Job Term: Permanent / Full Time Skills: Leak Detection, Automotive, Automation, Refrigeration, Air Conditioning, Manufacturing, Vacuum To Apply Direct: Please email your CV and covering letter to Iona Mulligan
S hape the Future of Precision EngineeringJoin a specialist manufacturer where your CNC turning expertise will create critical helical components that power industries worldwide. This isn't just another machining role - your work will be interesting - producing precision compressor rotor screws to exacting standards.About Precision Components LtdPrecision Components Ltd is a leading manufacturing of compressor rotor screws based in Rochdale. We specialise in the manufacture of high-quality, precision engineered helical components for various industries.What You'll Be DoingAs our CNC Setter-Operator for Turning operations, you'll set up and operate CNC turning machines to produce precision components to rigorous quality standards. Set up and operate CNC turning machines with FANUC controls Interpret technical drawings and modify programmes to part specifications Select and install cutting tools, attachments, and fixtures Conduct quality control inspections using micrometers, gauges, and verniers Monitor operations and troubleshoot cutting conditions Perform routine maintenance to ensure optimal performance Collaborate with team members to optimise production processes What We're Looking For Minimum three years' experience as time-served CNC Operator/Setter Turner preferably with knowledge of Doosan/ Mori Seiki machines FANUC experience and capable of setting machines for variety of components Experience producing complex components to very tight tolerances Ability to work efficiently with minimum supervision Experience using inspection equipment - micrometers, gauges, verniers Qualified Advanced Modern Apprenticeship or recognised time-served certification Knowledge of metal cutting techniques and Lean principles Flexibility to work rotating shift pattern and overtime when required Knowledge of Doosan VMC/HMC would be advantageous What We Offer Salary: £17.75 - £19.00 per hour (plus premium overtime rates - overtime available) Benefits: 6% employer-matched pension, 4x basic life assurance, 33 holidays per year increasing to 38 with service, Employee Assistance Programme, Company Sick Pay Scheme, Service Recognition Scheme, Cash Health Plan and Gift at Christmas. Hours: Two-week rotating shift pattern, 38-hour week - early finish on Friday: Week 1: Mon to Thurs: 5:45 till 14:05, Fri: 5:45 till 11:45 Week 2: 14:05 till 22:20, Fri: 11:45 till 18:05 Ready to advance your CNC career with a precision engineering leader? Your expertise in creating complex components will drive our continued success. Apply now to join our skilled team. REF-
May 20, 2026
Full time
S hape the Future of Precision EngineeringJoin a specialist manufacturer where your CNC turning expertise will create critical helical components that power industries worldwide. This isn't just another machining role - your work will be interesting - producing precision compressor rotor screws to exacting standards.About Precision Components LtdPrecision Components Ltd is a leading manufacturing of compressor rotor screws based in Rochdale. We specialise in the manufacture of high-quality, precision engineered helical components for various industries.What You'll Be DoingAs our CNC Setter-Operator for Turning operations, you'll set up and operate CNC turning machines to produce precision components to rigorous quality standards. Set up and operate CNC turning machines with FANUC controls Interpret technical drawings and modify programmes to part specifications Select and install cutting tools, attachments, and fixtures Conduct quality control inspections using micrometers, gauges, and verniers Monitor operations and troubleshoot cutting conditions Perform routine maintenance to ensure optimal performance Collaborate with team members to optimise production processes What We're Looking For Minimum three years' experience as time-served CNC Operator/Setter Turner preferably with knowledge of Doosan/ Mori Seiki machines FANUC experience and capable of setting machines for variety of components Experience producing complex components to very tight tolerances Ability to work efficiently with minimum supervision Experience using inspection equipment - micrometers, gauges, verniers Qualified Advanced Modern Apprenticeship or recognised time-served certification Knowledge of metal cutting techniques and Lean principles Flexibility to work rotating shift pattern and overtime when required Knowledge of Doosan VMC/HMC would be advantageous What We Offer Salary: £17.75 - £19.00 per hour (plus premium overtime rates - overtime available) Benefits: 6% employer-matched pension, 4x basic life assurance, 33 holidays per year increasing to 38 with service, Employee Assistance Programme, Company Sick Pay Scheme, Service Recognition Scheme, Cash Health Plan and Gift at Christmas. Hours: Two-week rotating shift pattern, 38-hour week - early finish on Friday: Week 1: Mon to Thurs: 5:45 till 14:05, Fri: 5:45 till 11:45 Week 2: 14:05 till 22:20, Fri: 11:45 till 18:05 Ready to advance your CNC career with a precision engineering leader? Your expertise in creating complex components will drive our continued success. Apply now to join our skilled team. REF-
Elevation Recruitment Group
Huddersfield, Yorkshire
Elevation HR are delighted to be working with a successful Engineering Business based in Huddersfield as they look to appoint a HR Advisor on a full-time, permanent basis. Benefits as a HR Advisor include: Hybrid Working -1 Day Working from Home Flexible Start / End Times Time-in-lieu system - Gain an extra 12 days annual leave 25 Days Annual Leave plus Bank Holidays Health Cash Plan Reporting into the HR Business Partner, this role will join an established People team and be responsbile for working with stakeholders across the business to coach and advise on HR related issues for this growing and thriving manufacturing and engineering business including: Managing a high volume of employee relations casework advising managers on employment law Handle complex and sensitive cases by providing clear, practical advice and make timely decisions Coaching and guiding managers on HR policies, processes and embedding best practice across the business Supporting apprentice performance reviews and development conversations and interviews Prioritise a varied workload in a fast-paced, operational environment Build strong relationships with union representatives and support effective union engagement The right person for this HR Advisor role will have the following attributes: At least 2 years' experience in a HR Advisor role or above, preferably in an FMCG/Manufacturing/Logistics/Distribution environment Ideally you will be CIPD qualified or working towards this Experienced in dealing with high-volume complex ER casework If this sounds like an opportunity for you then please get in touch today!
May 20, 2026
Full time
Elevation HR are delighted to be working with a successful Engineering Business based in Huddersfield as they look to appoint a HR Advisor on a full-time, permanent basis. Benefits as a HR Advisor include: Hybrid Working -1 Day Working from Home Flexible Start / End Times Time-in-lieu system - Gain an extra 12 days annual leave 25 Days Annual Leave plus Bank Holidays Health Cash Plan Reporting into the HR Business Partner, this role will join an established People team and be responsbile for working with stakeholders across the business to coach and advise on HR related issues for this growing and thriving manufacturing and engineering business including: Managing a high volume of employee relations casework advising managers on employment law Handle complex and sensitive cases by providing clear, practical advice and make timely decisions Coaching and guiding managers on HR policies, processes and embedding best practice across the business Supporting apprentice performance reviews and development conversations and interviews Prioritise a varied workload in a fast-paced, operational environment Build strong relationships with union representatives and support effective union engagement The right person for this HR Advisor role will have the following attributes: At least 2 years' experience in a HR Advisor role or above, preferably in an FMCG/Manufacturing/Logistics/Distribution environment Ideally you will be CIPD qualified or working towards this Experienced in dealing with high-volume complex ER casework If this sounds like an opportunity for you then please get in touch today!
Team Leader - Electrical Purpose of the Role: Lead a team of operatives to assemble quality Offsite solutions at the optimum efficiency levels whilst working in a safe working environment and adhering to safe working practices. Ensure projects are fully complete within programme and budget deliverables and to the correct technical standards required. Key Deliverables: Provide health and safety leadership to ensure that the "safety first and foremost" message is visible and alive throughout all activities relating to operations under your leadership Lead a team of production operatives, ensuring the required level of performance is achieved. Address any attendance, timekeeping, conduct and capability concerns quickly and effectively. Train and develop team members. Be the manufacturing specialist in the installation of Electrical services, overseeing the quality & the technical acceptance of the manufactured products. Own the project from 30% kick off, through daily progress meetings, final quality check off, despatch and project close off. Maintain Project KPI's to track project progress, addressing any H&S, efficiency, quality or material shortage issues on a timely basis. Maintain excellent standards of housekeeping and workplace organisation within build cells at all times. Allocate the team to activities within each project, taking into account each operative's skills and safety certificates. Manage productivity within each project, re-allocating operatives wherever necessary. Minimising non productive time. Champion and drive improvements through the application of continuous improvement techniques and Lean. Take ownership for the quality of the team's output, completing all necessary QC documentation whilst identifying and addressing the root cause of any failures. Identify & record any problems that arise during manufacture and pursue a solution wherever possible. Monitor budget via business IFS system ensuring hours and costs remain within target. Highlight any forecasted overspends or potential failures to the Manufacturing Coordinator. Requirements: Apprentice trained electrician level 3 235/236 Trained to 18th edition electrical regulations Qualified to BS2391 electrical inspection & test Electrical containment install Distribution board wiring Electrical install information and technical drawings Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
May 20, 2026
Full time
Team Leader - Electrical Purpose of the Role: Lead a team of operatives to assemble quality Offsite solutions at the optimum efficiency levels whilst working in a safe working environment and adhering to safe working practices. Ensure projects are fully complete within programme and budget deliverables and to the correct technical standards required. Key Deliverables: Provide health and safety leadership to ensure that the "safety first and foremost" message is visible and alive throughout all activities relating to operations under your leadership Lead a team of production operatives, ensuring the required level of performance is achieved. Address any attendance, timekeeping, conduct and capability concerns quickly and effectively. Train and develop team members. Be the manufacturing specialist in the installation of Electrical services, overseeing the quality & the technical acceptance of the manufactured products. Own the project from 30% kick off, through daily progress meetings, final quality check off, despatch and project close off. Maintain Project KPI's to track project progress, addressing any H&S, efficiency, quality or material shortage issues on a timely basis. Maintain excellent standards of housekeeping and workplace organisation within build cells at all times. Allocate the team to activities within each project, taking into account each operative's skills and safety certificates. Manage productivity within each project, re-allocating operatives wherever necessary. Minimising non productive time. Champion and drive improvements through the application of continuous improvement techniques and Lean. Take ownership for the quality of the team's output, completing all necessary QC documentation whilst identifying and addressing the root cause of any failures. Identify & record any problems that arise during manufacture and pursue a solution wherever possible. Monitor budget via business IFS system ensuring hours and costs remain within target. Highlight any forecasted overspends or potential failures to the Manufacturing Coordinator. Requirements: Apprentice trained electrician level 3 235/236 Trained to 18th edition electrical regulations Qualified to BS2391 electrical inspection & test Electrical containment install Distribution board wiring Electrical install information and technical drawings Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Multi-Skilled Production Engineer - Morpeth Permanent Structured career development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Range of flexible benefits and Corporate discounts, holiday buy/sell scheme, optional health care and life assurance + Free parking + Free hot and cold + Excellent parental What You'll Be Part Of Morpeth Operations is the only PET bottled water site within CCEP GB, capable of producing 54,000 bottles per hour and over 1 million bottles each day. With a close knit team of 38 colleagues across Manufacturing, QESH, and Engineering, Morpeth offers a highly supportive learning environment and fantastic opportunities to grow your career within the site, across GB, and into wider Pan European roles. What You'll Do As a Multi-Skilled Production Engineer, you'll bring a balanced mix of mechanical and electrical expertise to keep our high-speed bottling and packaging lines running safely, efficiently, and to the highest standards. You'll work across a variety of technical challenges - from preventative maintenance and fault-finding to supporting changeovers and continuous improvement projects - ensuring equipment reliability and optimal performance. Mechanical & Technical Expertise Deliver advanced mechanical maintenance and fault-finding across high-speed packaging equipment. Support size changeovers, defect rectification, and breakdown recovery to minimise downtime. Carry out mechanical installations, component replacements, and precision adjustments to optimise performance. Provide electrical support when required, including fault-finding and safe working within control panels. Assist with commissioning new products and equipment alongside OEMs. Maintenance & Continuous Improvement Complete preventative and corrective maintenance in line with the Maintenance Execution Plan. Take ownership of small projects from concept through to handover. Contribute to new initiatives and improvement programmes to enhance reliability and efficiency. Collaboration & Support Work as part of a dedicated team across seasonal shift patterns (3-shift rotation in summer, 2-shift in winter). Use Microsoft applications (Excel, Word, PowerPoint) and relevant programming tools effectively. What We Expect From You Apprenticeship qualified or hold an engineering-based NVQ Level 3 or equivalent (e.g., SNQ, ONC, BTEC National Diploma), with both electrical and mechanical qualifications. Strong mechanical skill set with proven experience in fault-finding, repairs, and installations. Electrical competence for safe working and troubleshooting. Previous experience in FMCG manufacturing, ideally on high-speed bottling/packaging lines. Ability to work flexibly across shifts and as part of a collaborative team. The closing date for applications is 20/05/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
May 20, 2026
Full time
Multi-Skilled Production Engineer - Morpeth Permanent Structured career development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Range of flexible benefits and Corporate discounts, holiday buy/sell scheme, optional health care and life assurance + Free parking + Free hot and cold + Excellent parental What You'll Be Part Of Morpeth Operations is the only PET bottled water site within CCEP GB, capable of producing 54,000 bottles per hour and over 1 million bottles each day. With a close knit team of 38 colleagues across Manufacturing, QESH, and Engineering, Morpeth offers a highly supportive learning environment and fantastic opportunities to grow your career within the site, across GB, and into wider Pan European roles. What You'll Do As a Multi-Skilled Production Engineer, you'll bring a balanced mix of mechanical and electrical expertise to keep our high-speed bottling and packaging lines running safely, efficiently, and to the highest standards. You'll work across a variety of technical challenges - from preventative maintenance and fault-finding to supporting changeovers and continuous improvement projects - ensuring equipment reliability and optimal performance. Mechanical & Technical Expertise Deliver advanced mechanical maintenance and fault-finding across high-speed packaging equipment. Support size changeovers, defect rectification, and breakdown recovery to minimise downtime. Carry out mechanical installations, component replacements, and precision adjustments to optimise performance. Provide electrical support when required, including fault-finding and safe working within control panels. Assist with commissioning new products and equipment alongside OEMs. Maintenance & Continuous Improvement Complete preventative and corrective maintenance in line with the Maintenance Execution Plan. Take ownership of small projects from concept through to handover. Contribute to new initiatives and improvement programmes to enhance reliability and efficiency. Collaboration & Support Work as part of a dedicated team across seasonal shift patterns (3-shift rotation in summer, 2-shift in winter). Use Microsoft applications (Excel, Word, PowerPoint) and relevant programming tools effectively. What We Expect From You Apprenticeship qualified or hold an engineering-based NVQ Level 3 or equivalent (e.g., SNQ, ONC, BTEC National Diploma), with both electrical and mechanical qualifications. Strong mechanical skill set with proven experience in fault-finding, repairs, and installations. Electrical competence for safe working and troubleshooting. Previous experience in FMCG manufacturing, ideally on high-speed bottling/packaging lines. Ability to work flexibly across shifts and as part of a collaborative team. The closing date for applications is 20/05/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
Are you a Site Services Engineer looking for a new opportunity? An exciting opportunity has arisen for our client who is a leading food company in their sector. This is an exciting opportunity for an experienced engineer to lead and contribute to the development of the maintenance through further planned maintenance, reactive and development of continuous improvement activities. The role: Working Monday to Friday, you'll be reporting to the Site Manager responsible for the maintenance schedules on manufacturing and plant equipment. Working in a fast-paced, manufacturing environment, you will be an experienced engineer who is skilled and knowledgeable in Mechanical and Electrical maintenance. The client will consider a bias in Electrical or Mechanical, however Multi-skilled is essential and some Electrical understanding is essential. Duties: -You will be responsible in planning routine and breakdown maintenance schedules on Electrical/ Mechanical equipment. - Managing and motivating the team, a variety of time served individuals - Working knowledge or understanding of electrical systems, transformers, motors and various types of motor control systems, PLC fault finding. - On occasion there will be a hands on element of repairing and maintaining plant manufacturing equipment for all Hydraulic, Pneumatic and Electrical breakdowns. - Experience with machine HMI s, PLC s and diagnostics is desirable - Developing and implementing planned maintenance systems -Managing CAPEX projects The requirements: - Experience working with Pneumatics, Hydraulics and Electrics. - Motivational leader - Strong Mechanical/Electrical fault finding mindset. - Adaptable, flexible and self-motivated individual. - Time served as an apprentice in a mechanical/electrical engineering background or HNC/HND or degree qualified equivalent -Experience of working within a manufacturing environment - A good working knowledge of manufacturing processes and techniques Please note that whilst this is a wish list of requirements for the ideal candidate the client would also provide professional training to the right individual.
May 20, 2026
Full time
Are you a Site Services Engineer looking for a new opportunity? An exciting opportunity has arisen for our client who is a leading food company in their sector. This is an exciting opportunity for an experienced engineer to lead and contribute to the development of the maintenance through further planned maintenance, reactive and development of continuous improvement activities. The role: Working Monday to Friday, you'll be reporting to the Site Manager responsible for the maintenance schedules on manufacturing and plant equipment. Working in a fast-paced, manufacturing environment, you will be an experienced engineer who is skilled and knowledgeable in Mechanical and Electrical maintenance. The client will consider a bias in Electrical or Mechanical, however Multi-skilled is essential and some Electrical understanding is essential. Duties: -You will be responsible in planning routine and breakdown maintenance schedules on Electrical/ Mechanical equipment. - Managing and motivating the team, a variety of time served individuals - Working knowledge or understanding of electrical systems, transformers, motors and various types of motor control systems, PLC fault finding. - On occasion there will be a hands on element of repairing and maintaining plant manufacturing equipment for all Hydraulic, Pneumatic and Electrical breakdowns. - Experience with machine HMI s, PLC s and diagnostics is desirable - Developing and implementing planned maintenance systems -Managing CAPEX projects The requirements: - Experience working with Pneumatics, Hydraulics and Electrics. - Motivational leader - Strong Mechanical/Electrical fault finding mindset. - Adaptable, flexible and self-motivated individual. - Time served as an apprentice in a mechanical/electrical engineering background or HNC/HND or degree qualified equivalent -Experience of working within a manufacturing environment - A good working knowledge of manufacturing processes and techniques Please note that whilst this is a wish list of requirements for the ideal candidate the client would also provide professional training to the right individual.
CNC Machinist (programmer) c£up to 50k ABJ6469 Location: South Type: Permanent Onsite We are urgently seeking an experienced CNC Milling Programmer / Setter / Operator to join a modern, well-structured manufacturing environment. This role is suited to someone with a strong background in precision machining who can programme, set, and operate CNC milling machines safely and efficiently to achieve right-first-time results. You will be joining an inclusive, collaborative team within a professional workshop housing state-of-the-art CNC machinery, laser equipment, and CMM inspection. The business supports a diverse range of high-tech sectors including medical, aerospace, semiconductor, nuclear, and other scientific industries. Key Technical Environment: Heidenhain controls 5-axis milling Online programming Large part machining Key Accountabilities Programme, set, and operate CNC milling machines Read and interpret engineering drawings to ensure accurate manufacture Create and maintain layout sheets detailing tooling, set-ups, and machine parameters Work independently to high standards while meeting production deadlines Inspect and qualify own work using a range of measuring equipment Document quality results in line with company procedures Support and train colleagues where required Maintain a safe, clean, and organised working environment, adhering to PPE requirements Contribute to continuous improvement through time- and cost-saving initiatives Qualifications & Experience Time-served apprenticeship preferred (not essential) Ideally several years experience programming and operating 3-, 4- and 5-axis CNC milling machines Strong proficiency with Heidenhain controls (Fanuc experience advantageous) Ability to take responsibility for own quality, including use of MTE and completion of quality documentation Previous experience with Doosan, Matsuura, and/or Mazak machines Ability to machine to tight tolerances (circa 20 microns) Experience machining large components up to 2.5 metres Overhead crane and manual handling training beneficial (training can be provided) Strong communication skills and a positive, proactive attitude High focus on quality, productivity, and continuous improvement Flexible and adaptable to support a changing business environment Strong work ethic essential Benefits Package Salary: up to £50,000 per annum (approx. 39-hour week) Holidays: 23 days + 8 bank holidays Pension: 4% matched scheme (post-probation 3 months) To Apply Please contact Alison Basson ABJ6469, and call on (phone number removed), (phone number removed) or reply via email, entering the job title and reference code in the subject field to
May 19, 2026
Full time
CNC Machinist (programmer) c£up to 50k ABJ6469 Location: South Type: Permanent Onsite We are urgently seeking an experienced CNC Milling Programmer / Setter / Operator to join a modern, well-structured manufacturing environment. This role is suited to someone with a strong background in precision machining who can programme, set, and operate CNC milling machines safely and efficiently to achieve right-first-time results. You will be joining an inclusive, collaborative team within a professional workshop housing state-of-the-art CNC machinery, laser equipment, and CMM inspection. The business supports a diverse range of high-tech sectors including medical, aerospace, semiconductor, nuclear, and other scientific industries. Key Technical Environment: Heidenhain controls 5-axis milling Online programming Large part machining Key Accountabilities Programme, set, and operate CNC milling machines Read and interpret engineering drawings to ensure accurate manufacture Create and maintain layout sheets detailing tooling, set-ups, and machine parameters Work independently to high standards while meeting production deadlines Inspect and qualify own work using a range of measuring equipment Document quality results in line with company procedures Support and train colleagues where required Maintain a safe, clean, and organised working environment, adhering to PPE requirements Contribute to continuous improvement through time- and cost-saving initiatives Qualifications & Experience Time-served apprenticeship preferred (not essential) Ideally several years experience programming and operating 3-, 4- and 5-axis CNC milling machines Strong proficiency with Heidenhain controls (Fanuc experience advantageous) Ability to take responsibility for own quality, including use of MTE and completion of quality documentation Previous experience with Doosan, Matsuura, and/or Mazak machines Ability to machine to tight tolerances (circa 20 microns) Experience machining large components up to 2.5 metres Overhead crane and manual handling training beneficial (training can be provided) Strong communication skills and a positive, proactive attitude High focus on quality, productivity, and continuous improvement Flexible and adaptable to support a changing business environment Strong work ethic essential Benefits Package Salary: up to £50,000 per annum (approx. 39-hour week) Holidays: 23 days + 8 bank holidays Pension: 4% matched scheme (post-probation 3 months) To Apply Please contact Alison Basson ABJ6469, and call on (phone number removed), (phone number removed) or reply via email, entering the job title and reference code in the subject field to
Electrical Maintenance Team LeaderCovering 2 sites (Leeds and Barnsley) - 3 days at one site and 2 days at the otherSalary £50,000 + company car Monday-Friday - Days only (flexible working hours) Elevation Recruitment Group is recruiting an Electrical Bias Maintenance Team Leader for a manufacturing business in Leeds/Barnsley. while staying technically involved in day to day maintenance within a critical environment. The role This is a hands on role, leading a small team and take ownership of maintenance activity across the site. Responsibilities include: Hands on delivery of planned and reactive maintenance across plant, equipment and building systems Maintenance of electrical systems including fire alarms, batteries and uninterruptible power supplies Boiler maintenance, water testing and strip down for inspections Allocating work and supervising engineering activity using the works management system Training new starters and apprentices Completing risk assessments and ensuring safe systems of work Liaising with site users to plan shutdowns of critical systems We are looking for Electrical Maintenance Engineers/Maintenance Team Leaders with the following: Strong electrical maintenance experience, ideally a HNC in Electrical Engineering Experience working in a regulated or critical environment Previous experience leading or supervising engineers would be advantageous but also open to an experienced Electrical Maintenance Engineer Confidence prioritising work and communicating with stakeholders For more information about this Maintenance Team Leader role, please contact Kerry Hill. About Elevation Elevation Recruitment Group is a specialist recruitment consultancy that helps people build long-term, successful careers. We work across a wide range of industries and disciplines with a focus on making recruitment feel more human, more honest and more effective. We are specialists in every function and experts in every hire. Check out our website to find out more.
May 19, 2026
Full time
Electrical Maintenance Team LeaderCovering 2 sites (Leeds and Barnsley) - 3 days at one site and 2 days at the otherSalary £50,000 + company car Monday-Friday - Days only (flexible working hours) Elevation Recruitment Group is recruiting an Electrical Bias Maintenance Team Leader for a manufacturing business in Leeds/Barnsley. while staying technically involved in day to day maintenance within a critical environment. The role This is a hands on role, leading a small team and take ownership of maintenance activity across the site. Responsibilities include: Hands on delivery of planned and reactive maintenance across plant, equipment and building systems Maintenance of electrical systems including fire alarms, batteries and uninterruptible power supplies Boiler maintenance, water testing and strip down for inspections Allocating work and supervising engineering activity using the works management system Training new starters and apprentices Completing risk assessments and ensuring safe systems of work Liaising with site users to plan shutdowns of critical systems We are looking for Electrical Maintenance Engineers/Maintenance Team Leaders with the following: Strong electrical maintenance experience, ideally a HNC in Electrical Engineering Experience working in a regulated or critical environment Previous experience leading or supervising engineers would be advantageous but also open to an experienced Electrical Maintenance Engineer Confidence prioritising work and communicating with stakeholders For more information about this Maintenance Team Leader role, please contact Kerry Hill. About Elevation Elevation Recruitment Group is a specialist recruitment consultancy that helps people build long-term, successful careers. We work across a wide range of industries and disciplines with a focus on making recruitment feel more human, more honest and more effective. We are specialists in every function and experts in every hire. Check out our website to find out more.
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 19, 2026
Full time
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 19, 2026
Full time
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 19, 2026
Full time
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 19, 2026
Full time
Job Title: Design Engineer (Structural) Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £42,500 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: In this role, you will undertake a defined range of detail design activities in line with all relevant processes and quality requirements, supplying advice and support to operations and other functions, ensuring defined objectives are achieved whilst continually maintaining quality and service requirement. Core duties: Design Structural and Outfit arrangements using both 2D and 3D CAD packages Preparation of Production packages Liaise with Production Conduct ship visits to validate the current configuration of the structure, material state and layout Keep up to date in relevant technical areas to develop your skills and capabilities Work with our customers to help develop their design requirements Support apprentices and junior engineers in their session Essential Skills: You will have previous experience designing using 2D and 3D CAD packages (Autodesk, Siemens NX) You will have experience working with manufacturing drawings You will have a minimum of NVQ Level 3 or equivalent working experience. A HND/HNC would be beneficial You will have experience within a structural/fabrication design and manufacturing environment You will have excellent interpersonal communication skills The Design Services team: The Design Services team is an exciting workplace with a broad range of experience from Apprentices to Principal Engineers, with approx. 45 engineers in total. We take pride within the team to encourage and fully support development and career progression of our engineers. The team provides Design Solutions across the entire Royal Navy fleet, including the Queen Elizabeth Class Aircraft Carriers, Type 45 Destroyers, Type 23 Frigates, MCMV Hunt Class and Submarines. As the department continues to grow its customer base, we are expanding into naval shipbuilding and submarine programmes, alongside supporting major projects essential to maintaining the operational readiness of the UK fleet. Your role as a Design Engineer within the team will be to take ownership of a diverse range of design projects-from small, straightforward tasks to large, complex programmes that may span over a year-seeing them through the full project lifecycle from concept to completion. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
