162 jobs found

Ready to kick-start your future in engineering? Join as an Instrumentation, Control & Automation (ICA) Engineering Apprentice and gain hands-on experience supporting the UK's largest water and wastewater provider. Work with skilled engineers to develop advanced skills in electrical engineering, control systems, and automation, while earning a Level 6 Control Systems BEng Applied Professional Engineering qualification. What you'll be doing as an ICA Apprentice: Design, maintain, and optimise ICA systems, including sensors, actuators, and control loops for water and wastewater treatment Work on electrical installations, fault diagnosis, and maintenance of control panels, PLCs, and SCADA systems Use advanced control technologies to monitor plant performance, troubleshoot issues, and implement improvements Contribute to engineering projects, including upgrades and new installations, ensuring compliance with safety and regulatory standards Learn to integrate smart technologies and automation solutions to improve operational efficiency Apply Thames Water's safety protocols and champion best practices in electrical and ICA work Where you'll work: Location: Clearwater Court, Reading RG1 8DB- Hybrid Hours: 36-hour week over four working days plus one training day Start date: September 2026 Training and qualification : You'll study with Warwick University, a leading UK engineering training provider, through a mix of 2.5-day block-release sessions and online learning across each 12-week semester. Qualification achieved: Level 6 Apprenticeship Standard in Control Systems- BEng Applied Professional Engineering Duration: Permanent contract with a 48-54 month structured programme What you should bring to the role 5 GCSEs including Maths and English (grade 9-4 / A-C) 112 UCAS points, including A-Level Maths with a minimum grade B Travel required across Thames Water sites Good time management and communication skills Able to work well in a team and independently What's in it for you? Excellent salary: £23,500 annum Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays) Performance-related pay plan directly linked to company performance measures and targets Generous Pension Scheme through AON Access to lots of benefits to help you take care of you and your family's health and wellbeing, and your finances - from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We're the UK's largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It's a big job and we've got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Wate r Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you'll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits.If you're looking for a sustainable and successful career where you can make a daily difference to millions of people's lives while helping to protect the world of water for future generations, we'll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet.Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more.We're committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that's extra time, accessible formats, or anything else, just let us know. We're here to help and support.When a crisis happens, we all rally around to support our customers. As part of Team Thames, you'll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It's also a great opportunity to learn more about our business and meet colleagues. Disclaimer: Due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.

Principal Electrical Engineer - EC & I Are you ready to take the lead on some of the most challenging and rewarding engineering projects in the nuclear sector? I am looking for a Lead EC&I Engineer to champion the delivery of complex machine design and build projects, guiding them from concept through to manufacture, testing and successful client handover click apply for full job details

Remote working with occasional travel to office locations including: Manchester London Newcastle Glasgow Duration & Rate 6-month rolling contract Up to 65.00 per hour (Umbrella) Overview We are seeking an experienced Control & Instrumentation (C&I) Engineer with a strong systems engineering background to support major projects across the energy sector. This includes power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands-on experience delivering advanced control system solutions for large-scale energy assets. The successful candidate will bring strong expertise in control system architecture, control philosophy development, and control narrative preparation, alongside experience working with leading Distributed Control Systems (DCS). Key Responsibilities Develop Control Narratives , Control Philosophy documents , and Functional Logic Specifications for energy-sector automation systems Design robust control system network architectures , including Ethernet/IP, Profinet, Modbus, and redundant industrial networks Lead or support system configuration, testing (FAT/SAT), commissioning , and operational optimisation activities Interface with OEMs, EPC contractors , and multidisciplinary engineering teams on system design, upgrades, migrations, and modernisation projects Develop and maintain system backup strategies and cybersecurity policies , ensuring compliance with relevant instrumentation and energy-sector standards Produce high-quality technical documentation , engineering reports, and change management records Required Experience & Skills Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries Experience working with a major EPC contractor on complex FEED or detailed design projects Strong understanding of P&IDs , Cause & Effect diagrams , and industrial control strategies Hands-on knowledge of industrial communication protocols such as Profinet , Modbus TCP/IP , and Ethernet/IP Experience with OPC UA for system integration and data exchange Familiarity with DCS, ESD, and F&G systems Understanding of IEC 62443 cybersecurity principles and their application in critical infrastructure Desirable Experience Experience with leading DCS platforms such as Emerson Ovation , Emerson DeltaV , or Siemens SPPA-T3000 Previous involvement in large-scale infrastructure or energy transition programmes Key Competencies Strong analytical and problem-solving skills Ability to work effectively within multidisciplinary engineering teams Excellent communication and stakeholder management skills High attention to detail and commitment to engineering quality and safety Summary This is an excellent opportunity to contribute to complex, high-value energy projects supporting critical national infrastructure and the ongoing energy transition. The role offers a flexible working arrangement, exposure to leading-edge technologies, and involvement in major engineering programmes across the UK.

At Browne, we're committed to delivering high-quality services across the utilities sector, and strong procurement is at the heart of everything we do. We're now looking for an Assistant Buyer to join our growing team and support the effective sourcing of materials, equipment, and services that keep our operations running smoothly. As an Assistant Buyer at Browne, you'll play a key role in supporting the end-to-end procurement process, working closely with internal stakeholders and suppliers to ensure value for money, quality, and compliance. You'll assist with sourcing and purchasing goods and services, managing supplier relationships, monitoring costs, and maintaining appropriate inventory levels. You'll also support contract management, contribute to risk mitigation across the supply chain, and carry out market research to stay informed on trends, innovations, and opportunities for improvement. This role offers hands on exposure to both supply chain and procurement activities and is an excellent opportunity to develop your career within a regulated utilities environment. About Browne Browne Group is a leading utilities contractor specialising in the water and civil engineering sectors. We deliver complex, sustainable solutions that enhance public infrastructure, improve network resilience, and reduce environmental impact. Our industry-leading digital approach to project management and quality control ensures consistent delivery to the highest standards. Our expertise spans infrastructure, non-infrastructure, and maintenance services across the water and wastewater sectors. We deliver civil engineering works including pipelines, pumping stations and reservoirs; MEICA solutions covering mechanical, electrical, instrumentation, control and automation; and long-term maintenance programmes that support asset reliability and operational efficiency. This integrated capability enables us to meet diverse client needs across the full asset lifecycle. Browne is a subsidiary of Renew Holdings plc, a leading UK Engineering Services business. The Group operates through independently branded subsidiaries across UK and European markets, delivering essential infrastructure maintenance and renewal through its highly skilled, directly employed workforce. What We're Looking For We're looking for someone who is motivated, organised, and keen to learn, with the ability to work collaboratively across the business. You'll bring: Strong communication and interpersonal skills, with the confidence to engage with internal teams and suppliers Good analytical skills and attention to detail, with the ability to manage data and costs effectively A proactive and organised approach, able to manage multiple priorities in a fast-paced environment An interest in procurement, supply chain, or commercial operations, with a willingness to learn regulatory requirements within the utilities sector Strong IT skills and the ability to use systems to monitor inventory, costs, and supplier performance Previous experience in procurement or supply chain is not essential, as we're keen to support development and learning in this role. In return, you'll gain valuable experience in a supportive and professional environment, with opportunities to develop your skills, build lasting supplier relationships, and contribute to meaningful projects that support our wider business objectives. You may occasionally work outside standard hours or attend external meetings, offering further exposure and variety in your role. If you're looking to take the next step in your career and grow with a company that values integrity, collaboration, and continuous improvement, we'd love to hear from you. The Company has experienced unprecedented growth over the past few years. We have a vast number of employees, and provide support to clients from all over the country.

ELECTRICAL & INSTRUMENTATION SUPERVISOR Job Title - Electrical & Instrumentation Supervisor Location - Erith Salary - £60,000 - £65,000 Shift - M-F Days Job Role of the Electrical & Instrumentation Supervisor An exciting opportunity has become available for an experienced Electrical & Instrumentation Supervisor to work for a blue-chip industrial manufacturing company within the heavy industrial engineering sector. The Electrical & Instrumentation Supervisor will join an experienced engineering team to lead and support the site maintenance programme. The successful candidate will be responsible for supervising electrical and instrumentation maintenance activities, ensuring plant reliability, safety, and performance across the site. The Electrical & Instrumentation Supervisor will oversee planned preventative maintenance, reactive maintenance, and breakdown response while supporting continuous improvement initiatives. This is an excellent opportunity for an Electrical & Instrumentation Supervisor to join a fantastic company that values its staff and promotes a strong team culture. Sector - Factory Maintenance Non-Negotiable Requirements of the Electrical & Instrumentation Supervisor Electrical and instrumentation maintenance experience within an industrial manufacturing environment. Hands-on experience supervising pre-planned, reactive, and breakdown maintenance in a fast-paced industrial factory. Requirements for the Electrical & Instrumentation Supervisor Strong electrical fault-finding and diagnostic skills. Experience supervising maintenance teams and contractors. Knowledge of PLCs, instrumentation systems, motors, drives, and control panels. Apprentice Trained / NVQ Level 3 or equivalent in Electrical Engineering. Desirable Requirements for the Electrical & Instrumentation Supervisor Experience working within the UK manufacturing sector. Previous supervisory or team leadership experience within heavy industry. Knowledge of health & safety regulations and permit-to-work systems. The Electrical & Instrumentation Supervisor will benefit from: Employment with a stable and well-established organisation. Competitive benefits package. Ongoing training and development opportunities. Excellent opportunities for career progression. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Waheed Anjum at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply - please see our website for further details.

Our client, a leading player in the aerospace industry, is seeking a Senior Test Design Engineer to join their transformative team in Titchfield. The aerospace sector is entering a fascinating phase of innovation, and this role sits at the heart of it, particularly within aircraft fuel systems. Key Responsibilities: Leading the requirements capture, design development, and implementation of test rigs, stands, and fixtures Managing test equipment requests, scoping necessary work, and resource requirements Defining test equipment design requirements from functional needs Designing test rigs and fixtures (Knowledge of Creo preferred, with training available) Supporting the Engineering Services Manager in maintaining regulatory compliance of test facilities Coordinating and leading subcontracted test rig and fixture designs, including factory and site acceptance testing Preparing and reviewing technical documentation complying with company procedures Project managing design tasks, defining timelines and implementation plans Fostering strong communication across multi-disciplinary teams to meet customer needs and expectations Working individually or as part of a team while demonstrating core values and vision Job Requirements: Experience in testing, verification validation and testing Significant experience in test rig and fixture design Knowledge of mechanical engineering principles including design of structural components, hydraulic and pneumatic systems Proficiency in writing technical reports and requirement specifications Understanding of test rig controls and instrumentation (desirable) Knowledge of ATEX regulations and associated equipment (training available) Experience with risk assessment and risk register documentation (desirable) Problem-solving, creativity, and innovation skills Relevant apprenticeship or HNC/HND in Mechanical Engineering Benefits: Competitive compensation and benefits package, including 25 days holiday+ bank holidays Challenging projects within a dynamic collaborative team Excellent company benefits Opportunities for internal promotion and career growth Investment in long-term employee development through ongoing learning opportunities A dedication to improving lives through power management technologies A supportive environment prioritising health, safety, and well-being If you are an experienced Test Design Engineer looking to contribute to cutting-edge aerospace projects, we would love to hear from you. Apply now to join our client's growing team in Titchfield.

This UK-based engineering company, working across offshore energy, renewables, and other advanced industries, offers more than just a job. It provides long-term career stability within a respected, employee-owned business. You will benefit from competitive pay and a reliable pension scheme. The employee-owned structure means your contributions are valued and your input helps shape the direction of the company. With opportunities to work on technically challenging and globally significant projects. If you are looking for a role where you are trusted, supported, and given room to grow, this is a great opportunity. Control Systems Engineer £40,000 - £70,000 DOE + Pool Car, Profit Share, Paid Overtime & Pension. Shropshire Ref: 23250 Control Systems Engineer The Role: Development of PLC/SCADA/HMI system design and options from customer requirements PLC programming of control systems from given designs Involvement throughout whole software/systems lifecycle, from design through coding to testing, installation and configuration, and documentation (working throughout to full QA procedures) specifically production of FDS, DDS and Test Specifications Configure parameters for Variable Speed Drives Bid support, travel for technical input, customer liaison, input to sales proposals Working within project team to customer deadlines Installation and configuration/testing work at customer sites please note this will involve small amounts of offshore travel Controls Systems Engineer The Person: Good customer facing skills Knowledge of the full project lifecycle Innovative software background Passion for engineering with a significant experience to draw from Any experience of Allen Bradley PLC ControlLogix system would be highly advantageous however other mainstream PLC s ( Siemens TIA/S7, Mitsubishi or GE Fanuc ) would also be considered Instrumentation background highly preferred along with industry background of Marine, Oil & Gas or process industries Positions comes with an excellent comprehensive benefits package including Employee Ownership Scheme, Electric Vehicle Salary Sacrifice Scheme, Cycle to Work, Technology Vouchers, Employee Assistance Program Located in Shropshire this role is commutable from within and around the following areas: Shrewsbury, Telford, Wolverhampton, Birmingham and Walsall. For further information call Sharon Hill AE2

Junior Project Engineer (SCADA) Are you a motivated Junior Project Engineer with an interest in SCADA systems and industrial automation? Are you looking to develop your skills within a supportive engineering environment? If so, this opportunity could be ideal for you. Our client, a well-established engineering company, is seeking a Junior Project Engineer (SCADA) to join their team in Hemel Hempstead. The successful candidate will support the delivery of SCADA and control system projects, gaining hands-on experience across the full project lifecycle. Junior Project Engineer (SCADA) Permanent positionSalary: £30,000 - £40,000 (DOE)Monday to FridayHemel Hempstead Junior Project Engineer (SCADA) Job Description • Assist in the design and development of SCADA and control systems• Support the creation and organisation of technical documentation and system layouts• Work alongside senior engineers on project delivery from concept through to commissioning• Assist with data collection, site surveys, and asset information management• Support PLC/SCADA configuration, testing, and system integration activities• Liaise with internal teams, subcontractors, and clients to ensure project requirements are met• Help ensure projects are delivered on time and within budget• Maintain accurate project records with a strong focus on data quality and detail• Contribute to continuous improvement of engineering and documentation processes Junior Project Engineer (SCADA) Essential Experience / Skills / Qualifications • Degree in Electrical, Control & Instrumentation, Automation, or Systems Engineering• Strong ability to organise and manage technical information• High attention to detail and data accuracy• Good written communication skills• Proficiency in MS Word, Excel, and diagramming tools• Ability to work both independently and as part of a team• Valid UK driving licence Desirable • Awareness of SCADA or industrial control systems• Familiarity with site surveys and asset data collection• Basic understanding of PLCs, RTUs, and control networks• Exposure to URS or FEED-stage engineering If you feel you're a good fit for this position, please click 'apply'.

Senior Control Systems Engineer Reading Up to 65k My client is an established engineering organisation specialising in industrial automation, control systems, and process solutions, primarily within the utilities sector. They deliver end-to-end projects including design, software development, installation, and commissioning. Key Responsibilities Carry out site surveys and produce clear, structured reports Develop high-quality Functional Design Specifications (FDS) Design, program, and configure PLC, HMI, and SCADA systems Lead and deliver Factory Acceptance Tests (FAT), Customer FAT (CFAT), and Site Acceptance Tests (SAT) Produce Risk Assessments and Method Statements (RAMS) Support installation, commissioning, and fault-finding activities on site Manage project documentation, deliverables, and technical communications Collaborate with colleagues and support junior engineers through mentoring and training Essential Skills & Experience Experience in industrial automation and control systems Strong PLC programming experience (e.g. Allen Bradley or similar platforms) Knowledge of HMI/SCADA systems and process control principles Experience with commissioning and on-site delivery Electrical awareness and ability to work safely around control equipment Strong attention to detail in both software and documentation Effective communication skills (written and verbal) Ability to manage projects through to completion Competent IT and documentation skills Full UK driving licence Desirable Skills Experience with a range of PLC platforms (e.g. ControlLogix, Siemens, Mitsubishi) Familiarity with SCADA platforms (e.g. Wonderware, Iconics, Schneider) Industrial networking knowledge (e.g. Modbus, Profibus, Ethernet/IP) Experience with instrumentation (flow, level, pressure, drives) Electrical design or panel experience (including reading drawings) Experience within the utilities or water sector

Internal Technical Sales Engineer Industrial Electrical Control & Automation Negotiable Salary Package, Pension, and other benefits. Our Client has a requirement for an Internal Sales Engineer with experience in Electrical control and automation to provide sales and technical support to the external customer base, whilst developing and maintaining customer relationships and promoting products and services to maximise sales opportunities. You are most likely to be living in North of the Tyne area, including, North Shields, Whitley Bay, Wallsend, Longbenton, Jesmond, Cramlington, Blyth in order to commute. Ideally you will have knowledge of a wide range of electrical market related products and are likely to have strengths in more than one product area. This could be industrial electrical, control & automation/factory automation/process control including control gear, switchgear, automation equipment, variable speed drives, plc, hmi, instrumentation, cable management systems, connection systems, industrial data comms enclosures, sensors, and possibly ATEX equipment. As the Internal Sales Engineer you will respond to and handle all product technical enquiries. You will be required, with training, to understand and be familiar with the full product range with the ability to offer alternatives if required and advise on the selection of products where possible. You will liaise with Field Sales Engineers and other staff to achieve the branch objectives and sales performance and as is normal in a small team environment engage in other duties. It is also expected that you have commercial ability and awareness to generate quotation for customers and are competent to judge the competitive situation needed to win the order whilst being mindful of profitability. In order to perform this role successfully you will need technical electrical knowledge, there is flexibility on the qualification if you can illustrate your knowledge, product applications knowledge and commercial awareness. The ideal candidate may already be in a similar role as an internal sales engineer, technical support engineer, an electrical engineer looking to move into a commercial environment with the ability to illustrate good customer and administrative skills, or a graduate engineer with customer experience in a sales environment looking to develop their career in technical sales. Knowledge and Experience GCSE Maths and English (or equivalent) None mandatory but relevant knowledge and experience must be demonstrated or possibly ONC/HNC in Electrical engineering (or other electrical engineering qualification) Good working knowledge of Microsoft Office and data entry systems Full clean driving licence Experience in similar sales /customer service environment. Experience with an electrical engineering role, or a background in electrical distribution would be an advantage. Post codes used are for advertising purposes only. To register your interest contact us with an up to date CV and we will be pleased to call you for a confidential discussion. To view more of our positions click on the Rise logo at the top of this page or visit our website directly. We work across a range of business to business/B2B market sectors including Renewable Energy, Electrical, Control & Automation, Electronic, Renewable Energy, Pneumatics, Hydraulics, Fluid Power, Instrumentation, Engineering services companies, Industrial Consumables, Industrial Components, Capital Equipment, Material Handling, Scientific Equipment, Petrochemical and Utilities. Rise Executive Search & Recruitment Ltd are currently working on a wide range of business to business/B2B sales positions, account management, business development and sales management roles including: Internal Sales Engineer, Technical Support, Product Specialist, Sales Manager, UK Sales Manager, National Sales Manager, Country Manager, Regional Sales Manager, Area Sales Manager, Sales Executive, Senior Sales Executive, National Account Manager, Business Development Manager, Key Account Manager, Account Executive, National Account Executive, Sales Specialist, Global Account Manager, Sales Representative, Territory Sales, Field Sales, Client Relationship Manager, Sales Engineer, Sales Consultant, Technical Sales, Senior Sales Engineer, Export Sales, International Sales, European Sales, Branch Manager, Sales Director, Trainee Sales, Graduate Sales, Telesales, Internal Sales, Office Sales.

Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package 35,000 - 40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits. Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. Willingness to cover the South West of the UK, remotley. Working on a range of water / wastewater treatment systems, and related products. Support Installation, calibration, maintenance and verification of systems. Liaise with various engineering departments. Field Service Engineer / Water Treatment Engineer / Service Technician Requirements Proven engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Water treatment experience is a bonus. Knowledge of reverse osmosis, deionization, and filtration systems is preferred. Experience in field service roles such as Field Service Engineer, Service Engineer, Service Technician, or similar. A full UK driving license is essential. Willingness to travel across the Southwest region and work at various sites. Engineering qualifications are desirable but not essential.

This is an exciting opportunity to join the Systems Integration & Test team based in the UK working on a variety of test programs in support of aircraft landing gear development and qualification. Are you ready to contribute to ambitious projects and create a positive impact in the aerospace industry? At Safran, you'll work with the brightest minds and best technologies, building valuable experience and joining an innovative, supportive team. Safran Landing Systems are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end; OEM Design, Engineering & Manufacturing, through to Maintenance, Repair, and Overhaul (MRO). Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: -Early finish on Fridays -Competitive salary and annual bonus -25 days' holiday + bank holidays (option to buy/sell) -Flexible working options -Pension (matched up to 8%) and life assurance -Professional development, ongoing training, mentoring -Onsite amenities: parking, restaurant, bicycle storage, showers -Family-friendly and accessible workplace policies -Plus a wide range of flexible benefits of your choice Safran - Here, we craft excellence together. This is an exciting opportunity to join the Systems Integration & Test team based in the UK working on a variety of test programs in support of aircraft landing gear development and qualification. In this role, you will be responsible delivering development and qualification tests, from the early planning phases, development and set up of test solutions, execution of tests, through to final reporting. The testing will include static, fatigue, endurance and environmental tests for the development of new landing gear technology, qualification of new products and supporting in-service programmes. You will be required to: -Review test procedure requirements -Define detailed resource plans to achieve requirements -Lead the execution of test activities -Operate control & data acquisition systems. -Installation of test instrumentation -Conduct fault finding to resolve test issues -Liaise with internal and external customers and suppliers -Compile technical documentation and test reports -Participate in the on-going process improvement within the test facility Why Safran? -A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. -Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. -Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. -Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. -A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring An experienced engineer in your own field and with a good knowledge of other disciplines you will have worked in a mechanical test environment. You will need a minimum HNC/Degree or equivalent in Mechanical / Electrical or Mechatronics Engineering and experience within a qualification/development test environment and with the necessary experience to be successful in the role, to include the following: -Experience in structural strength, fatigue, endurance, environmental or Flight Test Instrumentation' -Experience in electrical & hydraulic systems, servo controls and PLC controllers. -Experience in the application & use of test control systems, data acquisition systems and instrumentation. -Practical experience within a test environment -Knowledge of strain gauging and application (Strain gauge theory would be advantageous). -Calibration of transducers e.g. force, pressure, displacement. -Technical report writing -Project management skills to meet customer requirements and deliver customer satisfaction on quality, cost and time. -Excellent computer literacy & IT skills e.g. Microsoft Applications. -Excellent verbal and written communication skills

Control Systems Engineer Position is with a global multi disciplined Engineering solutions provider We are seeking an experienced C&I Engineer with a strong systems-engineering background to support major projects across the energy sector, including power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands-on experience developing and delivering advanced control system solutions for large-scale energy assets. The ideal candidate will bring practical expertise in control system architecture, control philosophy, and control narrative development, along with familiarity with leading DCS platforms such as Emerson Ovation, Emerson DeltaV, or Siemens SPPA-T3000. Key Responsibilities Develop Control Narratives, Control Philosophy documents, and Functional Logic Specifications for energy-sector automation systems. Design robust control system network architectures, including Ethernet/IP, Profinet, Modbus, and redundant industrial networks. Lead or support system configuration, testing, FAT/SAT, commissioning, and operational optimisation activities. Interface with OEMs, EPC partners, and multidisciplinary engineering teams on system design, upgrades, migrations, and modernization projects. Develop and maintain system backup strategies, cybersecurity policies, and ensure compliance with relevant instrumentation and energy-sector standards. Prepare high-quality technical documentation, engineering reports, and change-management records. Required Experience & Skills Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries. Experience working with a major EPC contractor on complex FEED or Detailed Design projects. Strong understanding of P&IDs, Cause & Effect diagrams, and Control Strategies used in energy and industrial facilities. Hands-on knowledge of industrial communication protocols such as Profinet, Modbus TCP/IP, and Ethernet/IP. Experience with OPC UA for data exchange and system integration. Familiarity with DCS, ESD, and F&G systems. Understanding of IEC 62443 cybersecurity principles and their application to critical energy infrastructure. Role is available on Umbrella Ltd or PAYE Your expert recruitment consultant is Trevor Parsons, call today on (phone number removed) or email (url removed) Eden Brown is committed to equality in the workplace and is an equal opportunity employer. Eden Brown is acting as an Employment Business in relation to this vacancy.

Technical Sales Manager - Ballistic Instrumentation Job Type Full time - flexible working considered, with all personal situations taken into account. Location Approx. 60% office-based 10-20% client-facing Remainder home working Salary & Benefits Circa £45,000 per annum Competitive benefits including: Company pension (4% employer match) 24 days annual leave plus statutory holidays Bonus Discretionary bonus of up to 20% of salary , based on exceeding sales targets and cash generation. Role Overview This role is ideal for a ballistics or engineering professional who enjoys engaging with customers and is motivated to develop a career in technical sales . The Technical Sales Manager will combine strong technical knowledge of ballistic instrumentation with a consultative, customer-focused sales approach. Working closely with the Operations Manager, Managing Director and engineering team, the role is central to developing and winning business across military and civilian markets in the UK and export territories. You will play a hands-on role in shaping value propositions, supporting bids, converting opportunities into contracts, and ensuring customer feedback directly informs product and capability development. Key Objectives Develop and promote distinctive, market-leading value propositions aligned with company strategy Achieve and exceed annual sales, revenue and cash-generation targets Position the company as the supplier of choice for military and civilian ballistic instrumentation and targets Build long-term, trusted relationships with customers and stakeholders in the UK and overseas Key Responsibilities Sales & Business Development Proactively identify, develop and convert sales opportunities using a disciplined three-phase sales process Leverage an established or developing network within the ballistics community to understand, shape and influence customer requirements Lead and support public and private procurement bids through to contract award Deliver high-quality quotations and bid documentation that win profitable business Lead sales bids with a total contract value of up to £2m Gather market and competitor intelligence to support pricing, positioning and product development Technical & Customer Engagement Use strong technical understanding to translate customer needs into effective system solutions Work closely with engineering teams to define configurations, integration options and delivery approaches Support system integration, installation and customer training where required Develop and sell calibration and service offerings alongside capital equipment Internal Collaboration & Governance Contribute to annual sales and marketing plans aligned to company strategy Maintain CRM records (Monday) for enquiries, opportunities and orders Ensure bids, contracts and deliveries meet ISO, export licensing, firearms and regulatory requirements Maintain and support export licence applications (including LITE and SPIRE) Support smooth handover of won contracts to operations and delivery teams Drive continual improvement in sales processes and reporting Marketing & Representation Represent the business at trade shows, customer visits and industry events in the UK and abroad Contribute to sales and marketing collateral, website content and customer testimonials About You This role would suit a ballistics engineer, instrumentation engineer or technical specialist who enjoys customer engagement and wants to develop or expand their career in technical sales. You are comfortable operating at the interface between engineering, customers and commercial decision-making , and are motivated by seeing technically complex solutions turn into successful contracts. Essential Qualifications & Experience Engineering or STEM degree, or equivalent experience within the ballistics industry Engineering experience in ballistics or a closely related field Experience contributing to or leading sales, business development or bid activity Strong verbal and written communication skills Excellent attention to detail with the ability to manage multiple deadlines Project management capability and strong organisational skills Proactive, self-motivated and able to work independently or lead bid teams Good working knowledge of Microsoft Office Desirable Experience UK manufacturing experience Working knowledge of CRM systems Prior exposure to export-controlled or regulated environments

Controls & Automation Engineer 45,000 - 55,000 + Bonus + Excellent Benefits + Early Finish Fridays + Relocation Support Are you an experienced Controls & Automation Engineer looking for a hands-on role where you can make a real impact? This is an exciting opportunity to join a high-performing engineering team, working on a complex, 24/7 operational site where no two days are the same. This role combines technical problem-solving, project work, and leadership - giving you the chance to drive improvements, mentor others and play a key role in keeping operations running smoothly. What You'll Be Doing You'll be at the heart of operations, responsible for maintaining and improving control systems to minimise downtime and maximise performance. Your responsibilities will include: Troubleshooting and resolving complex control system issues Maintaining and enhancing PLC, HMI, and SCADA systems Leading and delivering engineering and automation projects Supporting site operations and ensuring rapid recovery from breakdowns Driving continuous improvement across control systems and equipment Managing contractors and working closely with internal teams Mentoring and coaching engineers, technicians, and apprentices What We're Looking For We're looking for someone who combines strong technical expertise with a proactive, problem-solving mindset. Essential: Electrical and instrumentation knowledge Experience with PLC, HMI and SCADA systems PLC programming skills HND (or higher) in an engineering discipline Strong verbal and written communication skills Desirable: Experience in a COMAH or heavy industrial environment Understanding of health, safety and environmental legislation Leadership, mentoring or coaching experience What You'll Get in Return 45,000 - 55,000 salary Bonus scheme (up to 2x target) 24-hour responsibility payment ( 3,150 per annum) 25 days annual leave plus 8 public holidays Company pension contribution (4%-9%) Life assurance (6x salary) Private medical insurance or healthcare cash plan plus dental scheme Onsite gym and wellbeing initiatives Employee Assistance Programme Education support grant ( 1,000 per child in university, paid annually) Cycle to Work scheme Employee rewards, recognition and discount programmes Additional benefits: Sign-on bonus (equivalent to one month's salary) Relocation support up to 8,000 Three months' rent covered Working Hours Monday to Thursday: 7:30am - 4:00pm Friday: 7:30am - 12:30pm (early finish every week) How to Apply: To apply for the role of Controls & Automation Engineer, please submit your CV direct for review or reach out to Georgie Ireland at E3 Recruitment for more information.

Control and instrumentation Engineer Location: Thirsk Salary: £63,000 per annum Hours: Monday - Friday Type: Permanent Imperial Recruitment Group are working with a large manufacturer based in North Yorkshire who are looking for a C&I Engineer on a full time - permanent basis Main Purpose: To ensure PLC software and hardware is, safely controlled, updated and adequate to maintain and improve plant performance and to ensure all instrumentation is controlled calibrated and fit for purpose. Deliver solutions to problems using new and existing technologies and be at the forefront of both planned and reactive stops using the C&I skillset to diagnose and rectify issues. Duties: Ensuring instrumentation and control systems comply with the relevant health and safety regulations. Carrying out risk assessments on Process, plant, instrumentation and control systems. Trouble shooting and fault-finding process, plant, instrumentation and control systems. Maintaining and improving existing process, plant, instrumentation and control systems to ensure operational requirements are optimised; Maintaining instrumentation and control systems documentation and software back up, including responsibility for disaster recovery of all aspects of factory automated plant To work with the stores personnel to ensure critical spares are identified and held or available when required. To maintain instrumentation capability and calibration through personal and third party suppliers. To develop other capable engineers and apprentices Obtain and update software licenses To plan and manage your day to day duties, issues and projects to ensure timescales are agreed and met when necessary Providing call out back up to maintenance technicians in the event of breakdowns or other emergencies; Liaising with the stores and procurement coordinator when ordering relevant equipment, spares and service; Working collaboratively with suppliers, project and site teams; Production output will always be prioritised and you may be asked to perform various tasks, breakdowns or compliance issues, to ensure continuation of production. Any other duty which may be deemed necessary in order to meet the needs of the business Requirements: Ideally experienced in the development and maintenance of all aspects of Programmable Logic Controllers (PLC) , Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems (essentially Siemens and Wonder ware); Current and relevant qualifications required for electrical and Electronic engineering. Ideally experience of working with complex Instrumentation and control systems in a food manufacturing environment. Must be able to demonstrate an in depth understanding of the operation, connection, test and calibration of such instrumentation and control systems; Working knowledge of the IET Wiring Regulations and their application in the manufacturing environment; Familiar with all aspects of operation and fault finding on Servo Drive systems; Familiar with ATEX regulations; Familiar with flameproof and intrinsically safe system; Excellent creative problem-solving and troubleshooting skills; Good communication and interpersonal skills; Good team working skills; Ability to coach others and deliver training; A willingness to accept responsibility and make decisions For more information please contact Imperial Recruitment Group

My client is a rapidly expanding specialist engineering business and they are now looking to recruit an experience Controls Systems Engineer with PLC programmin skills to join the growing team. The Control Systems Engineer role is focused on the design, development, testing and commissioning of PLC / HMI control systems in line with approved control narratives and HMI specifications. This requires large amount of communication with predominantly the Engineering team; however, you will also be expected to liaise with Customers, Sales, Procurement and Manufacturing. The role requires ownership of control systems from concept through to commissioning and final handover, including interpretation of specifications, software development, system testing (FAT/SAT), and on-site commissioning. Responsibilities: Independent programming of bespoke process control systems using Siemens PLC / HMI programming techniques. Reading and understanding of P&IDs, specifications & control narratives. Carry out regular design reviews with the team and customer. Making modifications to HMI screens and operations in line with internal and external feedback. Specification of requirements to allow third parties to design & build Control Panels. Ensure designs conform to industry, customer, and company standards, including conformance with CE and UL/CSA approvals. Analyse designs using suitable tools. Assist with the production of accurate technical documents (such as O&Ms, specifications etc) to suppliers and customers, both internal and external. Develop and implement sequenced control logic (e.g. fill, drain, pressure control, interlocked operations). Interpret and implement control philosophies from P&IDs, control specifications and functional descriptions. Design and configure PLC I/O systems including analogue and digital signals. Integrate third-party equipment such as drives, instrumentation and control devices into the PLC system. Key Skills: PLC & HMI programming (Siemens TIA Portal) Ability to debug and fault-find complex control systems under real operating conditions Programming of SCADA systems using WIN CC+ Professional Interfacing / handshaking to plant and factory control systems Understanding of relevant industry standards Control design / component specification/ drafting, (AutoCAD preferred) Interviews are ongoing so apply now.

Electrical Technician Monday - Friday DaysStarting basic up to £43,000 (rising after probation) + Overtime + Allowances + HealthcareLocation: Clevedon, SomersetCommutable from: Bristol, Weston-super-Mare, Portishead, Yatton, Cheddar, Bridgwater Are you an Electrical Bias Engineer or Field Service Engineer looking for something a bit different from the standard factory maintenance environment? Yolk Recruitment are supporting a specialist engineering business working at the forefront of their sector. This is an opportunity to join a massively growing engineering company who work across industrial, pharmaceutical, chemical and infrastructure sectors throughout the UK and Europe. The role offers a genuine mix of workshop engineering in Clevedon, as well as the opportunty to work across customer sites on site installation and commissioning work, making it ideal for somebody who enjoys variety, problem-solving and practical hands-on engineering. This is what you'll be doing: As an Electrical Bias Engineer, you'll be involved in the build, installation, commissioning and fault-finding of specialist systems both within the workshop and at customer sites. The role is roughly 50/50 split between workshop-based work and travelling to customer siteswhere you will be fully expnesed and receive additional allowances for. You'll be working on: Motors, pumps and valves Control panels and electrical installations PLC-controlled equipment Instrumentation and sensors Cable installation and site wiring Modular process and filtration systems Fault-finding and commissioning activities Electrical: Confident reading and interpreting electrical schematics and technical drawings Safe isolation, testing and fault-finding using multimeters Working on 3-phase systems, motors, drives, relays and control panels Electrical installation and commissioning work across workshop and customer sites PLC fault-finding focused around I/O checks, diagnostics and system support rather than major software modifications Mechanical: Working with pumps, pipework, valves and process systems Exposure to hydraulic and pneumatic systems would be beneficial What you'll need to succeed: Background within maintenance engineering, field service, installation or commissioning Heavy Electrical bias with practical fault-finding experience Comfortable travelling to customer sites when required Ability to read schematics and technical drawings Strong hands-on engineering mindset and willingness to get involved across both electrical and mechanical work The business are particularly interested in engineers from backgrounds such as: Electrical Maintenance Engineer Field Service Engineer Electrical Installation Engineer Commissioning Engineer Multi-Skilled Maintenance Engineer And this is what you'll get in return: Starting salary up to £43,000 with progression after probation Enhanced overtime rates Additional daily travel allowances Healthcare package Regular salary reviews Monday to Friday days role Long-term progression within a growing specialist engineering sector Opportunity to work on varied UK and European projects This is an excellent opportunity to move into a growing engineering sector with strong long-term demand, varied engineering work and genuine development opportunities. Are you up to the challenge? If you're an electrically biased engineer looking for a hands-on role with variety, travel and specialist project work, apply today. Please note, whilst we do our best to contact all applicants, due to the volume of applications we cannot guarantee feedback to every candidate. If you have not heard from us within 7 days, unfortunately your application has not been successful on this occasion.

A leading chemical manufacturing company is seeking a Maintenance Manager based near Croydon. The role offers a competitive salary of 65,000 per annum, with company pension, annual leave, and ongoing training and development opportunities. Manage the maintenance of the plant and buildings at the Mitcham facility, utilising the CMMS. Administer and maintain this system and associated records, ensuring all plant equipment is kept in a safe and operable condition with minimum downtime, making best use of internal resources and minimising contractor and consultant use. The role will also be responsible for managing maintenance and capital budgets. Key Responsibilities: Manage and maintain the CMMS, ensuring accurate records and effective preventative maintenance across all plant and equipment. Ensure all plant and utilities are maintained in a safe and compliant condition to minimise downtime and maximise operational efficiency. Maintain all regulatory and internal compliance standards, including statutory inspections and site engineering standards. Ensure all maintenance activities are carried out safely, with strict adherence to EHS procedures and the aim of zero accidents. Manage maintenance purchasing, spares, and inventory within agreed budget constraints. Lead capital projects including planning, CEAR submissions, execution, cost control, and project close-out. Oversee site utilities including boilers, thermal oil systems, compressors, nitrogen systems, cooling systems, incineration systems, and associated site services. Act as PI administrator, ensuring plant documentation including P&IDs, electrical drawings, and equipment files are accurate and up to date. Candidate Requirements: Degree level qualification in Chemical, Electrical or Mechanical Engineering, or minimum 5 years' experience in a chemical or manufacturing engineering environment. Strong experience in chemical plant maintenance and mechanical engineering systems. Knowledge of instrumentation, PLCs, and HMI systems. Experience managing maintenance budgets and capital projects. Apply directly for this Maintenance Manager role in Mitcham or contact Sean Turner on (phone number removed) to discuss further.