Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Plumbing & Heating Engineer Salary: £35k to £40k (depending on experience & qualifications) + Benefits Location: Wetherby-based, with travel across the North East Join a growing, family-run business where your work genuinely makes a difference North East Heating Solutions is a fast-growing, family-owned business specialising in electric heating and hot water systems. With a strong reputation for quality and customer service, we continue to expand across the East of England. We are now looking for a skilled Plumbing & Heating Engineer to join our team in a varied, hands-on role. This is a great opportunity for someone who enjoys working out on site, takes pride in their work, and is looking to develop their skills further within a supportive and forward-thinking company. The Role- varied, practical and rewarding This is a field-based role where no two days are the same. You will be responsible for the installation, removal and commissioning of hot water systems, working primarily within domestic residential properties . You will also work closely with our electrical team on the installation of modern electric heating systems, making this an ideal opportunity for someone open to expanding their skillset. Key responsibilities include: Removal of existing domestic heating and hot water systems (including cylinders, tanks and associated pipework) Installation, commissioning and testing of hot water systems Pipework installation and connection to water supply and system controls Fault finding, diagnostics and pressure testing Working collaboratively with electricians on electric heating installations Ensuring all work meets current safety and regulatory standards Providing a high level of customer service, including explaining systems to end users Maintaining accurate job records, photos and documentation Supporting general warehouse organisation and stock control when required The ideal candidate: We are looking for someone who is reliable, practical and takes pride in delivering high-quality work. You will have: Proven experience as a plumber or heating installer NVQ Level 2 or 3 in Plumbing & Heating (or equivalent) Strong knowledge of domestic hot water and heating systems Good fault-finding and problem-solving skills A proactive and professional approach when working on customer sites A full UK driving licence The ability to work independently and as part of a wider team Gas Safe registration is not required. What is on offer? Salary of £35k to £40k depending on experience Company vehicle provided Pension scheme Private healthcare after 6 months Ongoing training and development, including exposure to modern electric heating systems The opportunity to join a supportive, family-run business with long-term growth plans Additional Information This role involves travel across the East of England Candidates should ideally live within 30 minutes of Wetherby Work is carried out in residential and commercial environments The role can involve lifting and being in confined spaces Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.
May 14, 2026
Full time
Plumbing & Heating Engineer Salary: £35k to £40k (depending on experience & qualifications) + Benefits Location: Wetherby-based, with travel across the North East Join a growing, family-run business where your work genuinely makes a difference North East Heating Solutions is a fast-growing, family-owned business specialising in electric heating and hot water systems. With a strong reputation for quality and customer service, we continue to expand across the East of England. We are now looking for a skilled Plumbing & Heating Engineer to join our team in a varied, hands-on role. This is a great opportunity for someone who enjoys working out on site, takes pride in their work, and is looking to develop their skills further within a supportive and forward-thinking company. The Role- varied, practical and rewarding This is a field-based role where no two days are the same. You will be responsible for the installation, removal and commissioning of hot water systems, working primarily within domestic residential properties . You will also work closely with our electrical team on the installation of modern electric heating systems, making this an ideal opportunity for someone open to expanding their skillset. Key responsibilities include: Removal of existing domestic heating and hot water systems (including cylinders, tanks and associated pipework) Installation, commissioning and testing of hot water systems Pipework installation and connection to water supply and system controls Fault finding, diagnostics and pressure testing Working collaboratively with electricians on electric heating installations Ensuring all work meets current safety and regulatory standards Providing a high level of customer service, including explaining systems to end users Maintaining accurate job records, photos and documentation Supporting general warehouse organisation and stock control when required The ideal candidate: We are looking for someone who is reliable, practical and takes pride in delivering high-quality work. You will have: Proven experience as a plumber or heating installer NVQ Level 2 or 3 in Plumbing & Heating (or equivalent) Strong knowledge of domestic hot water and heating systems Good fault-finding and problem-solving skills A proactive and professional approach when working on customer sites A full UK driving licence The ability to work independently and as part of a wider team Gas Safe registration is not required. What is on offer? Salary of £35k to £40k depending on experience Company vehicle provided Pension scheme Private healthcare after 6 months Ongoing training and development, including exposure to modern electric heating systems The opportunity to join a supportive, family-run business with long-term growth plans Additional Information This role involves travel across the East of England Candidates should ideally live within 30 minutes of Wetherby Work is carried out in residential and commercial environments The role can involve lifting and being in confined spaces Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.
CBSbutler Holdings Limited trading as CBSbutler
Pitsea, Essex
Senior Mechanical Engineer Basildon, Essex (1 day/week on site) 53ph (Inside IR35) Initial 6 month contract Please note we can only consider sole UK Nationals for this role We are currently looking for a Senior Mechanical Engineer to join the Precision Guidance Integrated Project Team (IPT), working on equipment for the next generation of Missile Seeker Programmes. What you'll do as a Senior Mechanical Engineer: Support senior members of staff in the delivery of technical solutions on critical Business Programmes. Generation of mechanical solutions to relevant company and international standards. Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. Generate BoM within approve PLM system (Teamcenter). Contribute to reviews of Mechanical designs in accordance with business and industry standards. Deliver design solutions against Technical Requirements, within budget and timescales. What we need from you: Mechanical engineering for Electronic Products (including EO). Perform 'hands on' mechanical design and development using 3D CAD software (PTC Creo). Structural design and an ability to carry out 'first pass' analyses and work in conjunction with full-time Structural Analysts. Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. Detail and assembly drawing generation, in accordance with BS8888. Numerical calculations, tolerance studies, etc. Proven understanding of the application of materials and process finishes to meet EO Product needs. Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. Ability to work within a multi-discipline IPT. Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability.
May 14, 2026
Contractor
Senior Mechanical Engineer Basildon, Essex (1 day/week on site) 53ph (Inside IR35) Initial 6 month contract Please note we can only consider sole UK Nationals for this role We are currently looking for a Senior Mechanical Engineer to join the Precision Guidance Integrated Project Team (IPT), working on equipment for the next generation of Missile Seeker Programmes. What you'll do as a Senior Mechanical Engineer: Support senior members of staff in the delivery of technical solutions on critical Business Programmes. Generation of mechanical solutions to relevant company and international standards. Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. Generate BoM within approve PLM system (Teamcenter). Contribute to reviews of Mechanical designs in accordance with business and industry standards. Deliver design solutions against Technical Requirements, within budget and timescales. What we need from you: Mechanical engineering for Electronic Products (including EO). Perform 'hands on' mechanical design and development using 3D CAD software (PTC Creo). Structural design and an ability to carry out 'first pass' analyses and work in conjunction with full-time Structural Analysts. Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. Detail and assembly drawing generation, in accordance with BS8888. Numerical calculations, tolerance studies, etc. Proven understanding of the application of materials and process finishes to meet EO Product needs. Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. Ability to work within a multi-discipline IPT. Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability.
Job Description Job Title: Control Systems Engineer Working Pattern: Days Working location: Bristol/Hybrid (minimum 3 Days in the office) We have an exciting opportunity for a Control Systems Engineer to work in our Mission Critical Systems & Software team. This team sits within our consolidated Engineering, Technology & Safety function, supporting multiple Naval Marine programmes across our Defence and Power Systems sectors in Bristol. They will take part in the design, verification, and in-service support of Control Systems solutions for Marine Gas Turbines and Electrical Distribution Switchboard products, and will work on systems, hardware, and software, according to their skillset and the business needs. Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture What you will be doing: Working in accordance with relevant engineering processes and standards, the engineer may perform or coordinate tasks at all stages of the lifecycle of the product, such as: System architecture design, analysis, and allocation of functional and safety requirements. Assess design specifications and work with the supply-chain to procure compliant hardware and software solutions. Interpret customer and derived requirements, definitions and validate for the system or product. Software design, coding, review, test (across a range of platforms including PLCs, Real-Time Embedded Controllers and Human-Machine Interface panels). Conducting systems verification, compliance, and regulatory qualification. Supporting the Installation, commissioning, In-Service diagnostic, and modification of systems. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Hold a degree level qualification or equivalent in a relevant engineering subject, such as Systems Engineering, Controls, Electronics or Software Engineering. Have knowledge of structured engineering processes in a regulated industry. Be able to work as a member of the team to deliver Product Development or Application Engineering solutions to meet business project needs and deadlines. Possess excellent written and verbal communication/influencing skills, being able to clearly and effectively articulate ideas, plans and priorities to engineers of other disciplines. It would be advantageous if you: Have experience in structured software programming to a recognised standard, in the form of at least one of the following: PLC programming, particularly Siemens Simatic S7 to Level 2 or above. Model-Based Software Development using the Mathworks toolsuite (Matlab, Simulink, etc.) Hand-coding for embedded systems, in C, C++ or similar Have experience of developing high integrity systems in line with IEC 61508 or similar standard (including Aerospace equivalents) Are professionally registered as an Incorporated or Chartered Engineer or be working towards gaining a professional status. Are willing to travel on occasion, to support integration or commissioning activity at Supplier or Customer facility. To work for the Rolls-Royce Defence business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive Closing date: 26/05/2026 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Software Systems Posting Date 13 May 2026; 00:05 Posting End Date 26 May 2026PandoLogic.
May 14, 2026
Full time
Job Description Job Title: Control Systems Engineer Working Pattern: Days Working location: Bristol/Hybrid (minimum 3 Days in the office) We have an exciting opportunity for a Control Systems Engineer to work in our Mission Critical Systems & Software team. This team sits within our consolidated Engineering, Technology & Safety function, supporting multiple Naval Marine programmes across our Defence and Power Systems sectors in Bristol. They will take part in the design, verification, and in-service support of Control Systems solutions for Marine Gas Turbines and Electrical Distribution Switchboard products, and will work on systems, hardware, and software, according to their skillset and the business needs. Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture What you will be doing: Working in accordance with relevant engineering processes and standards, the engineer may perform or coordinate tasks at all stages of the lifecycle of the product, such as: System architecture design, analysis, and allocation of functional and safety requirements. Assess design specifications and work with the supply-chain to procure compliant hardware and software solutions. Interpret customer and derived requirements, definitions and validate for the system or product. Software design, coding, review, test (across a range of platforms including PLCs, Real-Time Embedded Controllers and Human-Machine Interface panels). Conducting systems verification, compliance, and regulatory qualification. Supporting the Installation, commissioning, In-Service diagnostic, and modification of systems. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Hold a degree level qualification or equivalent in a relevant engineering subject, such as Systems Engineering, Controls, Electronics or Software Engineering. Have knowledge of structured engineering processes in a regulated industry. Be able to work as a member of the team to deliver Product Development or Application Engineering solutions to meet business project needs and deadlines. Possess excellent written and verbal communication/influencing skills, being able to clearly and effectively articulate ideas, plans and priorities to engineers of other disciplines. It would be advantageous if you: Have experience in structured software programming to a recognised standard, in the form of at least one of the following: PLC programming, particularly Siemens Simatic S7 to Level 2 or above. Model-Based Software Development using the Mathworks toolsuite (Matlab, Simulink, etc.) Hand-coding for embedded systems, in C, C++ or similar Have experience of developing high integrity systems in line with IEC 61508 or similar standard (including Aerospace equivalents) Are professionally registered as an Incorporated or Chartered Engineer or be working towards gaining a professional status. Are willing to travel on occasion, to support integration or commissioning activity at Supplier or Customer facility. To work for the Rolls-Royce Defence business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive Closing date: 26/05/2026 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Software Systems Posting Date 13 May 2026; 00:05 Posting End Date 26 May 2026PandoLogic.
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
May 14, 2026
Full time
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
NMS Recruit Ltd t/a Russell Taylor Group
Widnes, Cheshire
Senior Control Systems Engineer Widnes - Hybrid (2 days from home) Are you a Control Systems Engineer who enjoys taking a project from concept through to commissioning? Do you have strong PLC experience and a practical, hands-on approach? Would you like to work on energy sector projects with real technical responsibility? What's in it for you? 55,000 basic salary 25 days holiday plus bank holidays Hybrid working - 2 days from home 37.5-hour week with flexitime 5% pension What will you be doing? Delivering full project lifecycle control systems engineering, from initial concept to final handover Designing both hardware and software for control systems Programming PLCs (ideally Siemens) Producing control panel and electrical designs Supporting on-site commissioning and client handover Providing practical, robust control solutions within the energy sector Where you'll be doing it? You'll be joining a system integration specialist based in Widnes, focused on delivering control systems projects across the energy sector. The business supports clients from early design through to installation and commissioning, with engineers involved at every stage of the project lifecycle. What you'll need: Proven experience as a Control Systems Engineer within a project environment Strong PLC programming skills (Siemens preferred) Experience with control panel and electrical design Full project lifecycle experience Experience commissioning systems on site A practical, hands-on approach to problem solving We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
May 14, 2026
Full time
Senior Control Systems Engineer Widnes - Hybrid (2 days from home) Are you a Control Systems Engineer who enjoys taking a project from concept through to commissioning? Do you have strong PLC experience and a practical, hands-on approach? Would you like to work on energy sector projects with real technical responsibility? What's in it for you? 55,000 basic salary 25 days holiday plus bank holidays Hybrid working - 2 days from home 37.5-hour week with flexitime 5% pension What will you be doing? Delivering full project lifecycle control systems engineering, from initial concept to final handover Designing both hardware and software for control systems Programming PLCs (ideally Siemens) Producing control panel and electrical designs Supporting on-site commissioning and client handover Providing practical, robust control solutions within the energy sector Where you'll be doing it? You'll be joining a system integration specialist based in Widnes, focused on delivering control systems projects across the energy sector. The business supports clients from early design through to installation and commissioning, with engineers involved at every stage of the project lifecycle. What you'll need: Proven experience as a Control Systems Engineer within a project environment Strong PLC programming skills (Siemens preferred) Experience with control panel and electrical design Full project lifecycle experience Experience commissioning systems on site A practical, hands-on approach to problem solving We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
A well-established scientific company is searching for a Technical Support Engineer to join a growing team. As part of the team, you will be involved in maintenance, installations, troubleshooting and commissioning of high value electronic equipment and real time monitoring systems. The role would suit a curious and customer-focussed Engineer with broad electrical skills, some mechanical engineering and basic electronics capability. You will mainly be based on site, however depending on projects and customer needs, you will be required to travel at short notice. This may also include overnight stays and occasional international travel, so you will need to be flexible and adaptable. Responsibilities include: Prepare, test and optimise survey and data capture equipment to ensure peak performance Support equipment installation and commissioning at client sites, including mounting systems on various platforms Provide on-site technical support to ensure smooth operation and customer satisfaction Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), documenting results and resolving issues Diagnose and troubleshoot equipment faults, coordinating repairs as needed Manage equipment mobilisation and demobilisation logistics Communicate effectively with clients during installation and commissioning activities Create and maintain technical documentation and reference materials Mentor junior technical staff, sharing knowledge and best practices To be considered, you will have previous experience with electronic equipment, instrumentation, or technical systems including troubleshooting and fault-finding skills. You will have, strong attention to detail and methodical approach to testing and documentation. A full UK driving license is essential in this role. Any experience with survey equipment, sensors, or data acquisition systems in a field-based role would be highly advantageous.
May 14, 2026
Full time
A well-established scientific company is searching for a Technical Support Engineer to join a growing team. As part of the team, you will be involved in maintenance, installations, troubleshooting and commissioning of high value electronic equipment and real time monitoring systems. The role would suit a curious and customer-focussed Engineer with broad electrical skills, some mechanical engineering and basic electronics capability. You will mainly be based on site, however depending on projects and customer needs, you will be required to travel at short notice. This may also include overnight stays and occasional international travel, so you will need to be flexible and adaptable. Responsibilities include: Prepare, test and optimise survey and data capture equipment to ensure peak performance Support equipment installation and commissioning at client sites, including mounting systems on various platforms Provide on-site technical support to ensure smooth operation and customer satisfaction Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), documenting results and resolving issues Diagnose and troubleshoot equipment faults, coordinating repairs as needed Manage equipment mobilisation and demobilisation logistics Communicate effectively with clients during installation and commissioning activities Create and maintain technical documentation and reference materials Mentor junior technical staff, sharing knowledge and best practices To be considered, you will have previous experience with electronic equipment, instrumentation, or technical systems including troubleshooting and fault-finding skills. You will have, strong attention to detail and methodical approach to testing and documentation. A full UK driving license is essential in this role. Any experience with survey equipment, sensors, or data acquisition systems in a field-based role would be highly advantageous.
Job Title: Control Systems Engineer Location: Renfrew Rate: DOE (Dependent on Experience) Overview: We are seeking a skilled and motivated Control Systems Engineer to support the delivery of control systems projects across a range of industrial environments. The successful candidate will have experience in the design, development, testing, and commissioning of control systems, with a strong technical background in PLCs, SCADA, and motion control technologies. Key Responsibilities: Design, develop, and implement control systems solutions in line with project requirements Program and configure PLCs and SCADA systems (Rockwell and/or Siemens platforms) Develop and integrate motion control systems where required Produce functional design specifications, test documentation, and technical reports Conduct functional testing (FAT/SAT) to ensure systems meet performance and safety requirements Support commissioning activities on-site and remotely Troubleshoot and resolve control system issues during project delivery and operation Work closely with multidisciplinary teams including electrical, mechanical, and project engineers Ensure compliance with relevant industry standards, safety regulations, and company procedures Key Requirements: Proven experience working on control systems projects within industrial environments Strong knowledge of PLC programming and SCADA systems (Rockwell and/or Siemens) Experience with motion control systems and associated technologies Good understanding of industrial communication protocols (e.g. Ethernet/IP, Profibus, Modbus, Profinet) Experience of functional testing, including FAT and SAT processes Ability to read and interpret electrical and control system drawings Strong problem-solving skills and attention to detail Effective communication skills and the ability to work collaboratively within a team Desirable: Ideally TUV Certified The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website.
May 14, 2026
Contractor
Job Title: Control Systems Engineer Location: Renfrew Rate: DOE (Dependent on Experience) Overview: We are seeking a skilled and motivated Control Systems Engineer to support the delivery of control systems projects across a range of industrial environments. The successful candidate will have experience in the design, development, testing, and commissioning of control systems, with a strong technical background in PLCs, SCADA, and motion control technologies. Key Responsibilities: Design, develop, and implement control systems solutions in line with project requirements Program and configure PLCs and SCADA systems (Rockwell and/or Siemens platforms) Develop and integrate motion control systems where required Produce functional design specifications, test documentation, and technical reports Conduct functional testing (FAT/SAT) to ensure systems meet performance and safety requirements Support commissioning activities on-site and remotely Troubleshoot and resolve control system issues during project delivery and operation Work closely with multidisciplinary teams including electrical, mechanical, and project engineers Ensure compliance with relevant industry standards, safety regulations, and company procedures Key Requirements: Proven experience working on control systems projects within industrial environments Strong knowledge of PLC programming and SCADA systems (Rockwell and/or Siemens) Experience with motion control systems and associated technologies Good understanding of industrial communication protocols (e.g. Ethernet/IP, Profibus, Modbus, Profinet) Experience of functional testing, including FAT and SAT processes Ability to read and interpret electrical and control system drawings Strong problem-solving skills and attention to detail Effective communication skills and the ability to work collaboratively within a team Desirable: Ideally TUV Certified The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website.
Electrical Engineer Location: Wimbledon, SW19 Salary: 40,000 per annum Hours: Monday - Friday (Standard Days) The Role Are you looking for a stable, high-quality work environment away from the chaos of constant travel? We are seeking a qualified Electrical Engineer to join the estates team at our prestigious university campus in Wimbledon. This isn't your typical "on-the-road" gig. You will be based at a single, beautiful site, ensuring the lights stay on and the systems run smoothly for the next generation of thinkers and creators. What's in it for you? True Work-Life Balance: Forget the weekend call-outs. This is a solid Monday to Friday role. Location: Work in the heart of Wimbledon, easily accessible by tram, train, and tube. Environment: A vibrant, academic setting with well-maintained facilities and a supportive team. Stability: Enjoy the peace of mind that comes with a permanent role at a leading educational institution. Your Responsibilities Execute planned preventative maintenance (PPM) across the campus. Respond to reactive electrical faults and emergency repairs. Oversee minor installations and upgrades to existing systems. Ensure all work complies with the latest BS 7671 standards. Collaborate with the wider facilities team to maintain a safe, functional campus. What We're Looking For Qualified: NVQ Level 3 in Electrical Installations (or equivalent). Certified: 18th Edition (BS 7671) is essential. Experienced: Previous experience in commercial maintenance or a campus-style environment is a huge plus. Mindset: A proactive problem-solver who takes pride in the quality of their work. Ready to ditch the commute? If you're a skilled sparky looking for a reliable, well-paid role in a great South West London location, we want to hear from you. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 14, 2026
Seasonal
Electrical Engineer Location: Wimbledon, SW19 Salary: 40,000 per annum Hours: Monday - Friday (Standard Days) The Role Are you looking for a stable, high-quality work environment away from the chaos of constant travel? We are seeking a qualified Electrical Engineer to join the estates team at our prestigious university campus in Wimbledon. This isn't your typical "on-the-road" gig. You will be based at a single, beautiful site, ensuring the lights stay on and the systems run smoothly for the next generation of thinkers and creators. What's in it for you? True Work-Life Balance: Forget the weekend call-outs. This is a solid Monday to Friday role. Location: Work in the heart of Wimbledon, easily accessible by tram, train, and tube. Environment: A vibrant, academic setting with well-maintained facilities and a supportive team. Stability: Enjoy the peace of mind that comes with a permanent role at a leading educational institution. Your Responsibilities Execute planned preventative maintenance (PPM) across the campus. Respond to reactive electrical faults and emergency repairs. Oversee minor installations and upgrades to existing systems. Ensure all work complies with the latest BS 7671 standards. Collaborate with the wider facilities team to maintain a safe, functional campus. What We're Looking For Qualified: NVQ Level 3 in Electrical Installations (or equivalent). Certified: 18th Edition (BS 7671) is essential. Experienced: Previous experience in commercial maintenance or a campus-style environment is a huge plus. Mindset: A proactive problem-solver who takes pride in the quality of their work. Ready to ditch the commute? If you're a skilled sparky looking for a reliable, well-paid role in a great South West London location, we want to hear from you. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Are you a Sales or Business Development Engineer passionate about clean energy, electrification, and sustainable maritime solutions? We have an exciting opportunity if you have experience of developing strategic partnerships within major ports in the UK or Northern Europe. This position offers the opportunity to work at the forefront of global electrification and decarbonisation, delivering technically advanced solutions that have a tangible impact on the future of energy and infrastructure. This role provides direct influence on how ports across Northern Europe transition toward cleaner, electrified operations. Sales/Business Development Manager Ports & Shore Power £60k Basic + Excellent Bonus, Car Allowance & Healthcare Opportunity to work with a global industry leader Work from home. Ref: 25309 Proven experience in business development, sales, or solutions engineering within electrical power systems, industrial drives, or infrastructure projects, with a strong understanding of medium- and high-voltage electrical systems, power electronics and electrical infrastructure. Experience working with complex, engineered-to-order solutions and the ability to operate credibly with both engineering teams and senior customer stakeholders. Sales Manager / BDM - The Role: Drive business growth across the UK, Ireland, and Northern Europe within the ports and maritime infrastructure sector, with a focus on electrification and shore power solutions Develop and execute a regional business development strategy aligned with wider systems growth objectives. Identify, develop and convert opportunities in port electrification, shore power (LV/MV/HV), and supporting electrical infrastructure. Build and manage a strong sales pipeline using CRM tools and internal processes Act as the key technical-commercial interface with customers, supporting the development of compliant and competitive electrical system solutions. Support preparation of proposals, system designs and commercial offers, and participate in technical and contractual discussions Build and maintain relationships with port authorities, terminal operators, EPC contractors, utilities, and engineering consultants. Represent the business at industry events across the maritime and electrification sectors Collaborate internally with engineering, proposals, project management, and service teams to ensure smooth project handover and delivery. Regular travel across the UK, Ireland, and Northern Europe, with occasional international travel is required. Sales / BDM - The Person: Degree (or equivalent) in Electrical or Power Engineering, or a related discipline Strong experience in business development, technical sales, or solutions engineering within electrical power systems or industrial infrastructure Solid understanding of medium- and high-voltage systems, power electronics, and electrical distribution infrastructure Experience working with complex, engineered-to-order solutions Commercially astute with strong negotiation skills and a consultative approach to sales Able to engage confidently with both technical engineering teams and senior customer stakeholders Strategic thinker with the ability to execute and deliver results in a regional role Strong communication, presentation, and stakeholder management skills Self-motivated and able to work independently across a geographically dispersed region Ideal candidates will have direct experience in shore power (cold ironing) or port electrification projects, alongside a strong understanding of ports, terminals or heavy industrial environments. Familiarity with electrical standards and grid compliance across UK, Ireland and Northern Europe would be ideal as would an appreciation of decarbonisation drivers, funding mechanisms and regulatory pressures shaping the maritime sector. For further information and a confidential discussion, please contact Sharon Hill. AE1
May 14, 2026
Full time
Are you a Sales or Business Development Engineer passionate about clean energy, electrification, and sustainable maritime solutions? We have an exciting opportunity if you have experience of developing strategic partnerships within major ports in the UK or Northern Europe. This position offers the opportunity to work at the forefront of global electrification and decarbonisation, delivering technically advanced solutions that have a tangible impact on the future of energy and infrastructure. This role provides direct influence on how ports across Northern Europe transition toward cleaner, electrified operations. Sales/Business Development Manager Ports & Shore Power £60k Basic + Excellent Bonus, Car Allowance & Healthcare Opportunity to work with a global industry leader Work from home. Ref: 25309 Proven experience in business development, sales, or solutions engineering within electrical power systems, industrial drives, or infrastructure projects, with a strong understanding of medium- and high-voltage electrical systems, power electronics and electrical infrastructure. Experience working with complex, engineered-to-order solutions and the ability to operate credibly with both engineering teams and senior customer stakeholders. Sales Manager / BDM - The Role: Drive business growth across the UK, Ireland, and Northern Europe within the ports and maritime infrastructure sector, with a focus on electrification and shore power solutions Develop and execute a regional business development strategy aligned with wider systems growth objectives. Identify, develop and convert opportunities in port electrification, shore power (LV/MV/HV), and supporting electrical infrastructure. Build and manage a strong sales pipeline using CRM tools and internal processes Act as the key technical-commercial interface with customers, supporting the development of compliant and competitive electrical system solutions. Support preparation of proposals, system designs and commercial offers, and participate in technical and contractual discussions Build and maintain relationships with port authorities, terminal operators, EPC contractors, utilities, and engineering consultants. Represent the business at industry events across the maritime and electrification sectors Collaborate internally with engineering, proposals, project management, and service teams to ensure smooth project handover and delivery. Regular travel across the UK, Ireland, and Northern Europe, with occasional international travel is required. Sales / BDM - The Person: Degree (or equivalent) in Electrical or Power Engineering, or a related discipline Strong experience in business development, technical sales, or solutions engineering within electrical power systems or industrial infrastructure Solid understanding of medium- and high-voltage systems, power electronics, and electrical distribution infrastructure Experience working with complex, engineered-to-order solutions Commercially astute with strong negotiation skills and a consultative approach to sales Able to engage confidently with both technical engineering teams and senior customer stakeholders Strategic thinker with the ability to execute and deliver results in a regional role Strong communication, presentation, and stakeholder management skills Self-motivated and able to work independently across a geographically dispersed region Ideal candidates will have direct experience in shore power (cold ironing) or port electrification projects, alongside a strong understanding of ports, terminals or heavy industrial environments. Familiarity with electrical standards and grid compliance across UK, Ireland and Northern Europe would be ideal as would an appreciation of decarbonisation drivers, funding mechanisms and regulatory pressures shaping the maritime sector. For further information and a confidential discussion, please contact Sharon Hill. AE1
Machine Learning Engineer (Computer Vision) Location: Surrey or Bristol (hybrid/remote options considered) Type: Permanent (full-time) Team: AI / Computer Vision Visa: Unfortunately, visa sponsorship is not available for this role. About the Company We're a UK-based technology business building AI-led vision systems that turn image and video streams into automated, real-time insight . Our products are used in operational environments where speed, reliability, and accurate detection matter-helping teams monitor large areas and respond quickly when something changes. The Role We're looking for a Machine Learning / Computer Vision Engineer to help tackle challenging real-world problems using modern deep learning. You'll work closely with a multidisciplinary team to develop, productionise, and deploy computer vision models that run reliably across cloud and edge environments. What You'll Be Doing Build, test, and improve production-grade deep learning models for computer vision tasks (classification, detection, segmentation, tracking) Optimise and deploy CV/ML pipelines to cloud and edge platforms Design, curate, and manage image/video datasets for training and evaluation Develop and maintain annotation workflows and tooling Create synthetic data pipelines (including generative approaches) to augment real-world datasets Stay current with emerging tools, methods, and best practices in CV/ML What We're Looking For Degree in Computer Science, Electrical Engineering, Robotics (or similar), or equivalent commercial experience Proven experience delivering deep learning solutions for core CV tasks (classification / detection / segmentation / tracking) Strong skills with PyTorch (or similar) and CV libraries such as OpenCV / scikit-image Strong, production-ready Python engineering (version control, testing, code reviews) Analytical mindset with strong problem-solving ability Clear communicator who works well in a collaborative team Nice to Have Experience with real-world sensor data (e.g., RGB-D, thermal, radar) Model optimisation/deployment tooling (ONNX, TensorRT) Edge deployment experience (e.g., NVIDIA Jetson or other resource-constrained devices) Familiarity with MLOps tooling (e.g., DVC, MLflow) Relevant open-source contributions in computer vision Interested? If this sounds like you, apply with your CV or get in touch to discuss the role in confidence.
May 14, 2026
Full time
Machine Learning Engineer (Computer Vision) Location: Surrey or Bristol (hybrid/remote options considered) Type: Permanent (full-time) Team: AI / Computer Vision Visa: Unfortunately, visa sponsorship is not available for this role. About the Company We're a UK-based technology business building AI-led vision systems that turn image and video streams into automated, real-time insight . Our products are used in operational environments where speed, reliability, and accurate detection matter-helping teams monitor large areas and respond quickly when something changes. The Role We're looking for a Machine Learning / Computer Vision Engineer to help tackle challenging real-world problems using modern deep learning. You'll work closely with a multidisciplinary team to develop, productionise, and deploy computer vision models that run reliably across cloud and edge environments. What You'll Be Doing Build, test, and improve production-grade deep learning models for computer vision tasks (classification, detection, segmentation, tracking) Optimise and deploy CV/ML pipelines to cloud and edge platforms Design, curate, and manage image/video datasets for training and evaluation Develop and maintain annotation workflows and tooling Create synthetic data pipelines (including generative approaches) to augment real-world datasets Stay current with emerging tools, methods, and best practices in CV/ML What We're Looking For Degree in Computer Science, Electrical Engineering, Robotics (or similar), or equivalent commercial experience Proven experience delivering deep learning solutions for core CV tasks (classification / detection / segmentation / tracking) Strong skills with PyTorch (or similar) and CV libraries such as OpenCV / scikit-image Strong, production-ready Python engineering (version control, testing, code reviews) Analytical mindset with strong problem-solving ability Clear communicator who works well in a collaborative team Nice to Have Experience with real-world sensor data (e.g., RGB-D, thermal, radar) Model optimisation/deployment tooling (ONNX, TensorRT) Edge deployment experience (e.g., NVIDIA Jetson or other resource-constrained devices) Familiarity with MLOps tooling (e.g., DVC, MLflow) Relevant open-source contributions in computer vision Interested? If this sounds like you, apply with your CV or get in touch to discuss the role in confidence.
NMS Recruit Ltd t/a Russell Taylor Group
Stafford, Staffordshire
Control Systems Engineer Stafford / Hybrid Working Are you a Control Systems Engineer who enjoys hands-on PLC and SCADA development? Do you like working on full lifecycle projects from design through to commissioning? Would you value a role that offers flexibility alongside technically interesting work? What's in it for you? Up to 45,000 basic salary 25 days holiday plus bank holidays 5% pension 2 days working from home Private healthcare Death in Service benefit Overtime available Employee rewards scheme What will you be doing? Deliver complex control system projects from concept through to commissioning Develop PLC, SCADA and HMI software Translate user requirements into efficient and reliable control systems Carry out bench testing of software before deployment Support on-site commissioning and SAT activities Work closely with Project Managers and senior engineers to meet project milestones Liaise with clients to ensure systems are delivered and performing as expected Where you'll be doing it You'll be joining one of the UK's largest multidisciplinary design and build contractors, with over 100 years of industry experience. They support clients across Water, Power & Energy, Pharmaceutical, Nuclear and Food & Beverage sectors, delivering practical engineering solutions on essential infrastructure projects. What you'll need Experience delivering PLC and SCADA based control systems Strong PLC and HMI development skills across at least two platforms (Rockwell, Siemens, Mitsubishi or Schneider) Hands-on experience with SCADA systems Knowledge of EtherNet/IP, PROFINET, PROFIBUS DP/PA and Modbus TCP/IP Experience working with Variable Speed Drives Good understanding of electrical safety and safe working practices A proactive approach to health and safety We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
May 14, 2026
Full time
Control Systems Engineer Stafford / Hybrid Working Are you a Control Systems Engineer who enjoys hands-on PLC and SCADA development? Do you like working on full lifecycle projects from design through to commissioning? Would you value a role that offers flexibility alongside technically interesting work? What's in it for you? Up to 45,000 basic salary 25 days holiday plus bank holidays 5% pension 2 days working from home Private healthcare Death in Service benefit Overtime available Employee rewards scheme What will you be doing? Deliver complex control system projects from concept through to commissioning Develop PLC, SCADA and HMI software Translate user requirements into efficient and reliable control systems Carry out bench testing of software before deployment Support on-site commissioning and SAT activities Work closely with Project Managers and senior engineers to meet project milestones Liaise with clients to ensure systems are delivered and performing as expected Where you'll be doing it You'll be joining one of the UK's largest multidisciplinary design and build contractors, with over 100 years of industry experience. They support clients across Water, Power & Energy, Pharmaceutical, Nuclear and Food & Beverage sectors, delivering practical engineering solutions on essential infrastructure projects. What you'll need Experience delivering PLC and SCADA based control systems Strong PLC and HMI development skills across at least two platforms (Rockwell, Siemens, Mitsubishi or Schneider) Hands-on experience with SCADA systems Knowledge of EtherNet/IP, PROFINET, PROFIBUS DP/PA and Modbus TCP/IP Experience working with Variable Speed Drives Good understanding of electrical safety and safe working practices A proactive approach to health and safety We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
About the Role We are looking for a skilled and motivated Agricultural Fitter with strong expertise in hydraulic and electronic systems to join a well-established agricultural dealership or contracting operation. The successful candidate will be responsible for the maintenance, diagnostics, and repair of modern agricultural machinery, with a particular focus on hydraulic circuits, electronic control systems, GPS/auto-steer technology, and precision farming equipment. Key Responsibilities • Carry out diagnostics, servicing, and repair of hydraulic systems including pumps, rams, valves, hoses, and hydraulic motors on a wide range of agricultural machinery • Diagnose and repair electronic and electrical faults on tractors, combines, sprayers, drills, and ancillary equipment using manufacturer diagnostic software • Install, calibrate, and maintain GPS guidance systems, auto-steer, variable rate controllers, and ISOBUS-compatible implements • Perform routine servicing, pre-season inspections, and PDIs (pre-delivery inspections) on new and used machinery • Carry out both workshop-based and on-farm repairs, providing a responsive and professional field service when required • Read and interpret hydraulic schematics, wiring diagrams, and technical service bulletins • Maintain accurate service records and job cards, ensuring parts are ordered efficiently • Liaise with customers in a professional and courteous manner, providing clear communication on repair progress and timescales • Support the wider workshop team during peak periods such as harvest and drilling seasons • Stay up to date with new machinery technology, attending manufacturer training courses as required Skills & Requirements • Proven experience as an agricultural or plant fitter, ideally with a focus on hydraulic and electronic systems • City & Guilds / NVQ Level 3 in Land-Based Engineering or equivalent qualification • Strong working knowledge of hydraulic circuits and electronic control units (ECUs) • Experience using manufacturer diagnostic tools (e.g., John Deere Service Advisor, AGCO EDT, CNH EST, CLAAS CDS)• Ability to read and interpret technical drawings, hydraulic schematics, and wiring diagrams • Full UK driving licence (essential) • Excellent problem-solving skills and a methodical approach to fault-finding • Ability to work independently and as part of a team in a fast-paced environment • Willingness to undertake on-farm callouts, including occasional weekend and evening work during peak seasons Desirable • Manufacturer-specific training certifications (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Experience with precision agriculture technology and telematics systems • Welding and fabrication skills (MIG/TIG) • Forklift or telehandler licence What's on Offer • Competitive salary dependent on experience • Company vehicle or van (for field service roles) • Manufacturer training and ongoing professional development • Pension scheme and holiday entitlement • Supportive team environment with genuine career progression opportunities How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
May 14, 2026
Full time
About the Role We are looking for a skilled and motivated Agricultural Fitter with strong expertise in hydraulic and electronic systems to join a well-established agricultural dealership or contracting operation. The successful candidate will be responsible for the maintenance, diagnostics, and repair of modern agricultural machinery, with a particular focus on hydraulic circuits, electronic control systems, GPS/auto-steer technology, and precision farming equipment. Key Responsibilities • Carry out diagnostics, servicing, and repair of hydraulic systems including pumps, rams, valves, hoses, and hydraulic motors on a wide range of agricultural machinery • Diagnose and repair electronic and electrical faults on tractors, combines, sprayers, drills, and ancillary equipment using manufacturer diagnostic software • Install, calibrate, and maintain GPS guidance systems, auto-steer, variable rate controllers, and ISOBUS-compatible implements • Perform routine servicing, pre-season inspections, and PDIs (pre-delivery inspections) on new and used machinery • Carry out both workshop-based and on-farm repairs, providing a responsive and professional field service when required • Read and interpret hydraulic schematics, wiring diagrams, and technical service bulletins • Maintain accurate service records and job cards, ensuring parts are ordered efficiently • Liaise with customers in a professional and courteous manner, providing clear communication on repair progress and timescales • Support the wider workshop team during peak periods such as harvest and drilling seasons • Stay up to date with new machinery technology, attending manufacturer training courses as required Skills & Requirements • Proven experience as an agricultural or plant fitter, ideally with a focus on hydraulic and electronic systems • City & Guilds / NVQ Level 3 in Land-Based Engineering or equivalent qualification • Strong working knowledge of hydraulic circuits and electronic control units (ECUs) • Experience using manufacturer diagnostic tools (e.g., John Deere Service Advisor, AGCO EDT, CNH EST, CLAAS CDS)• Ability to read and interpret technical drawings, hydraulic schematics, and wiring diagrams • Full UK driving licence (essential) • Excellent problem-solving skills and a methodical approach to fault-finding • Ability to work independently and as part of a team in a fast-paced environment • Willingness to undertake on-farm callouts, including occasional weekend and evening work during peak seasons Desirable • Manufacturer-specific training certifications (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Experience with precision agriculture technology and telematics systems • Welding and fabrication skills (MIG/TIG) • Forklift or telehandler licence What's on Offer • Competitive salary dependent on experience • Company vehicle or van (for field service roles) • Manufacturer training and ongoing professional development • Pension scheme and holiday entitlement • Supportive team environment with genuine career progression opportunities How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
Ernest Gordon Recruitment Limited
Skelmersdale, Lancashire
Junior Plant Engineer (Heavy Plant) £40,000 - £45,000 + Training on Specialist Equipment + 1.5x Overtime + Van and Fuel Card + Private Pension + Holiday Purchase Scheme + Door 2 Door + Healthcare + Progression Skelmersdale, Greater Manchester Are you a Plant Engineer or similar looking to receive training and progress working with heavy plant like excavators, cranes or Casagrande, Bauer, Liebherr, Soilmec equipment, and looking for a new Monday to Friday role that offers plenty of training and a vehicle and is paid door to door? This company, established in the 1960's and has cemented themselves within the construction/plant industry and boasts a multimillion-pound turnover. With numerous offices, they have a global impact within the Plant and Construction industries. They have recently taken on some large projects, and as a result are looking for a Plant Engineer to join their team in Burscough. In this varied role you will be split between the workshop and the field, working on a variety of heavy construction plant equipment such as Soilmec, CAT, Casagrande, Bauer and Liebherr. You will be involved in fault finding on Mechanical and Electrical equipment, as well as rigging, carrying out inspections and preventative maintenance. This role would suit a Junior Plant Engineer looking for more experience working on heavy plant equipment, looking for a technical role within a global organisation, offering ongoing progression and career development. The Role Working on heavy machinery and plant equipment Split 80-20 between site and workshop Fault finding and maintenance Monday to Thursday (7:30am - 5pm) / Friday (7:30am - 1pm) The Person Junior Plant Engineer or similar UK driver's license Reference Number: BBBH24726c Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 14, 2026
Full time
Junior Plant Engineer (Heavy Plant) £40,000 - £45,000 + Training on Specialist Equipment + 1.5x Overtime + Van and Fuel Card + Private Pension + Holiday Purchase Scheme + Door 2 Door + Healthcare + Progression Skelmersdale, Greater Manchester Are you a Plant Engineer or similar looking to receive training and progress working with heavy plant like excavators, cranes or Casagrande, Bauer, Liebherr, Soilmec equipment, and looking for a new Monday to Friday role that offers plenty of training and a vehicle and is paid door to door? This company, established in the 1960's and has cemented themselves within the construction/plant industry and boasts a multimillion-pound turnover. With numerous offices, they have a global impact within the Plant and Construction industries. They have recently taken on some large projects, and as a result are looking for a Plant Engineer to join their team in Burscough. In this varied role you will be split between the workshop and the field, working on a variety of heavy construction plant equipment such as Soilmec, CAT, Casagrande, Bauer and Liebherr. You will be involved in fault finding on Mechanical and Electrical equipment, as well as rigging, carrying out inspections and preventative maintenance. This role would suit a Junior Plant Engineer looking for more experience working on heavy plant equipment, looking for a technical role within a global organisation, offering ongoing progression and career development. The Role Working on heavy machinery and plant equipment Split 80-20 between site and workshop Fault finding and maintenance Monday to Thursday (7:30am - 5pm) / Friday (7:30am - 1pm) The Person Junior Plant Engineer or similar UK driver's license Reference Number: BBBH24726c Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Field Service and Calibration Engineer - Materials Testing Materials Testing & Load Cell Systems - South West England Bristol, Gloucester, Swindon, Bath £35,000 - £45,000 Basic Salary + Vehicle + Benefits + Bonus Are you an experienced service engineer on materials testing equipment or load cell integrated systems? Or do you have knowledge of materials testing in a lab and looking to get into a field service role? Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Field Service and Calibration Engineer: You'll be field based, predominantly covering a region but with further UK travel as needed. You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation. Examples include impact, tensile, universal, fatigue, stress, or torsion testing. You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others. You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards. Compile detailed reports as appropriate. The field-based nature of the role will require nights away from home; on average of 1 - 2 per week. Ideal Background for the Field Service and Calibration Engineer: Knowledge of one of the following is essential: Materials Testing equipment, either as a current service engineer, or as somebody using the machinery in a lab. Specifically on impact, tensile, universal, fatigue, stress, or torsion testing. Service and calibration knowledge of load cells and connected systems such as checkweighers, weighbridges, or similar. A strong engineering understanding is essential in mechanical, electrical, and fluid disciplines. Approachable, honest, and a team player. Strong IT and communication skills. Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided. The Client recruiting for the Field Service and Calibration Engineer: Fastest growing company in their industry. Excellent training, support, and ongoing opportunities. Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors. "Recruit for attitude, train for skill" Trusted by testing laboratories, scientists, and engineers nationally. The Package for the Field Service and Calibration Engineer: £35,000 - £45,000 basic salary, depending on experience Annual company performance related bonus Pension at 5% from company, 3% employee Company van, tools, laptop & phone Continuous development and training 25 days holiday plus statutory holidays. Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG
May 14, 2026
Full time
Field Service and Calibration Engineer - Materials Testing Materials Testing & Load Cell Systems - South West England Bristol, Gloucester, Swindon, Bath £35,000 - £45,000 Basic Salary + Vehicle + Benefits + Bonus Are you an experienced service engineer on materials testing equipment or load cell integrated systems? Or do you have knowledge of materials testing in a lab and looking to get into a field service role? Read on for the opportunity to join this organisation; a prestigious, respected company. A place where you can grow and develop. Your Role as a Field Service and Calibration Engineer: You'll be field based, predominantly covering a region but with further UK travel as needed. You will be responsible for the service, maintenance, and repair of this testing equipment and instrumentation. Examples include impact, tensile, universal, fatigue, stress, or torsion testing. You will be working within a variety of appealing manufacturing sectors including the aerospace, automotive, and medical industries, amongst others. You will play an important role in ensuring the equipment is correctly calibrated and maintained to UKAS standards. Compile detailed reports as appropriate. The field-based nature of the role will require nights away from home; on average of 1 - 2 per week. Ideal Background for the Field Service and Calibration Engineer: Knowledge of one of the following is essential: Materials Testing equipment, either as a current service engineer, or as somebody using the machinery in a lab. Specifically on impact, tensile, universal, fatigue, stress, or torsion testing. Service and calibration knowledge of load cells and connected systems such as checkweighers, weighbridges, or similar. A strong engineering understanding is essential in mechanical, electrical, and fluid disciplines. Approachable, honest, and a team player. Strong IT and communication skills. Hold a full valid UK driving licence and have right to work in the UK as sponsorship can't be provided. The Client recruiting for the Field Service and Calibration Engineer: Fastest growing company in their industry. Excellent training, support, and ongoing opportunities. Work with a varied client base in Research, Automotive, Aerospace, General Manufacturing, and Rail sectors. "Recruit for attitude, train for skill" Trusted by testing laboratories, scientists, and engineers nationally. The Package for the Field Service and Calibration Engineer: £35,000 - £45,000 basic salary, depending on experience Annual company performance related bonus Pension at 5% from company, 3% employee Company van, tools, laptop & phone Continuous development and training 25 days holiday plus statutory holidays. Apply online now if you fit the above criteria and are eager to grow. Dave is the main point of contact for this role. INDENG
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
May 14, 2026
Full time
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
May 14, 2026
Full time
Senior Project Engineer - Mechanical Location: Bristol or Cardiff Type: Permanent Salary & Benefits: Competitive DOE + Car/Car Allowance + Flexible Benefits Summary We are seeking a Mechanical Senior Project Engineer to join our team in the South West. You will work closely with multidisciplinary teams from design through to delivery, driving excellence, safety, and continuous improvement throughout the project lifecycle. Key Responsibilities Lead delivery of the electrical packages for the project Champion Health & Safety, embedding a "Safety first and foremost" culture Support pre-commencement procedures to minimise risk and ensure compliance Identify, manage, and mitigate project risks and opportunities Re-engineer installations to meet client requirements while optimising profitability Provide accurate site and financial progress updates Ensure compliance with internal procedures and legislation Lead and engage project teams, setting expectations and managing performance Build strong client relationships to support efficient delivery and future opportunities Manage project closure, ensuring quality, commercial targets, and compliance are met Skills & Experience Experience delivering major electrical projects, ideally in MEP Strong leadership and team engagement skills Confident in risk management, compliance, and client liaison Committed to continuous improvement and high-quality delivery Solutions-focused with a drive for efficiency and innovation Benefits Car / car allowance and salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with leading provider, up to 8% employer contribution Personal Wellbeing & Volunteer Days Private medical insurance 24/7 Employee Assistance Programme (counselling & legal advice) Flexible benefits: Dental, Gym, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock Promoting our trusted Hotpoint products Your Training Journey We'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training: Welcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info Shadowing - Join an experienced engineer on the road to see the job in action Phase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough On-the-Job Learning (6 - 9 months) - Build your skills with real customers Phase 2 Training (1 week) - Level up your knowledge learning another appliance What You'll Need We're looking for people who are: Passionate about customer service Interested in electrics, mechanics, or hands-on problem-solving Hold a full UK manual driving licence Physically fit - able to move and lift appliances Eligible to work in the UK No previous field engineering experience is required - just a great attitude and a willingness to learn! What's In It for You? Pay: £27,377 - £28,352 per year (daily rate equivalent via umbrella company) Bonuses: Commission + overtime opportunities Vehicle: Fully equipped company van + fuel card Time Off: 20 days holiday + bank holidays increasing to 25 days once permanent Progression: The chance to move into a permanent role within 12 months with even more rewards Why Choose Hotpoint? Learn from the best with industry-leading training Join a globally respected brand trusted by millions Enjoy a secure career path with opportunities to grow Be part of a team that values skill, effort, and dedication Ready to Apply? This is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do. Hit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact The Academy Team!
May 14, 2026
Full time
Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock Promoting our trusted Hotpoint products Your Training Journey We'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training: Welcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info Shadowing - Join an experienced engineer on the road to see the job in action Phase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough On-the-Job Learning (6 - 9 months) - Build your skills with real customers Phase 2 Training (1 week) - Level up your knowledge learning another appliance What You'll Need We're looking for people who are: Passionate about customer service Interested in electrics, mechanics, or hands-on problem-solving Hold a full UK manual driving licence Physically fit - able to move and lift appliances Eligible to work in the UK No previous field engineering experience is required - just a great attitude and a willingness to learn! What's In It for You? Pay: £27,377 - £28,352 per year (daily rate equivalent via umbrella company) Bonuses: Commission + overtime opportunities Vehicle: Fully equipped company van + fuel card Time Off: 20 days holiday + bank holidays increasing to 25 days once permanent Progression: The chance to move into a permanent role within 12 months with even more rewards Why Choose Hotpoint? Learn from the best with industry-leading training Join a globally respected brand trusted by millions Enjoy a secure career path with opportunities to grow Be part of a team that values skill, effort, and dedication Ready to Apply? This is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do. Hit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact The Academy Team!
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
