450 jobs found

Our client is a leading manufacturer of bespoke engineering equipment, and, due to continued expansion, they are now seeking a Field Service Engineer to join their team. The successful candidate will be home based, covering Reading, Chippenham, Oxford and Basingstoke, carrying out installation, commissioning, calibrating, servicing and fault-finding activities on customer sites. Please note, this role does include working away from home to suit business needs, in return you will receive additional overnight payments and all expenses covered. Field Service Engineer Responsibilities: Carry out commissioning, calibration and servicing of bespoke engineering equipment on customer sites. Diagnose and repair electrical, electronic and electro-mechanical faults. Ensure all work is completed in accordance with company procedures and customer site requirements. Provide excellent customer support and technical advice when on site. Travel regularly throughout the designated regional area with occasional overnight stays where required. Promote high standards of Health & Safety and quality compliance at all times, adhere to site safety regulations, permit to work systems and risk assessments. Field Service Engineer Requirements: NVQ Level 3 (minimum) in an Electrical, Electronic, or Mechanical engineering. Strong electrical fault-finding and diagnostic capabilities. Previous experience working with calibration equipment. Ability to read and interpret engineering schematics and technical drawings. Self-motivated with the ability to work independently. Flexible approach to travel and customer site work. IT literate with experience using service reporting systems. Full UK driving licence. Field Service Engineer Benefits: Salary 46,000 to 48,000 DOE. Company car or car allowance provided. Overtime opportunities available. Additional payments when working away from home. Mobile phone, laptop, tools and test equipment supplied. Fantastic pension scheme. 25 days annual leave plus 8 bank holidays. NOTE : Our client welcomes applications from both commercial and ex-military candidates. Engineers leaving the Royal Navy, British Army or Royal Air Force with electrical, electronic, avionics, weapons engineering or mechanical engineering experience are strongly encouraged to apply.

Our client is a leading manufacturer of bespoke engineering equipment, and, due to continued expansion, they are now seeking a Field Service Engineer to join their team. The successful candidate will be home based, covering Reading, Chippenham, Oxford and Basingstoke, carrying out installation, commissioning, calibrating, servicing and fault-finding activities on customer sites. Please note, this role does include working away from home to suit business needs, in return you will receive additional overnight payments and all expenses covered. Field Service Engineer Responsibilities: Carry out commissioning, calibration and servicing of bespoke engineering equipment on customer sites. Diagnose and repair electrical, electronic and electro-mechanical faults. Ensure all work is completed in accordance with company procedures and customer site requirements. Provide excellent customer support and technical advice when on site. Travel regularly throughout the designated regional area with occasional overnight stays where required. Promote high standards of Health & Safety and quality compliance at all times, adhere to site safety regulations, permit to work systems and risk assessments. Field Service Engineer Requirements: NVQ Level 3 (minimum) in an Electrical, Electronic, or Mechanical engineering. Strong electrical fault-finding and diagnostic capabilities. Previous experience working with calibration equipment. Ability to read and interpret engineering schematics and technical drawings. Self-motivated with the ability to work independently. Flexible approach to travel and customer site work. IT literate with experience using service reporting systems. Full UK driving licence. Field Service Engineer Benefits: Salary 46,000 to 48,000 DOE. Company car or car allowance provided. Overtime opportunities available. Additional payments when working away from home. Mobile phone, laptop, tools and test equipment supplied. Fantastic pension scheme. 25 days annual leave plus 8 bank holidays. NOTE : Our client welcomes applications from both commercial and ex-military candidates. Engineers leaving the Royal Navy, British Army or Royal Air Force with electrical, electronic, avionics, weapons engineering or mechanical engineering experience are strongly encouraged to apply.

Our client is a leading manufacturer of bespoke engineering equipment, and, due to continued expansion, they are now seeking a Field Service Engineer to join their team. The successful candidate will be home based, covering Reading, Chippenham, Oxford and Basingstoke, carrying out installation, commissioning, calibrating, servicing and fault-finding activities on customer sites. Please note, this role does include working away from home to suit business needs, in return you will receive additional overnight payments and all expenses covered. Field Service Engineer Responsibilities: Carry out commissioning, calibration and servicing of bespoke engineering equipment on customer sites. Diagnose and repair electrical, electronic and electro-mechanical faults. Ensure all work is completed in accordance with company procedures and customer site requirements. Provide excellent customer support and technical advice when on site. Travel regularly throughout the designated regional area with occasional overnight stays where required. Promote high standards of Health & Safety and quality compliance at all times, adhere to site safety regulations, permit to work systems and risk assessments. Field Service Engineer Requirements: NVQ Level 3 (minimum) in an Electrical, Electronic, or Mechanical engineering. Strong electrical fault-finding and diagnostic capabilities. Previous experience working with calibration equipment. Ability to read and interpret engineering schematics and technical drawings. Self-motivated with the ability to work independently. Flexible approach to travel and customer site work. IT literate with experience using service reporting systems. Full UK driving licence. Field Service Engineer Benefits: Salary 46,000 to 48,000 DOE. Company car or car allowance provided. Overtime opportunities available. Additional payments when working away from home. Mobile phone, laptop, tools and test equipment supplied. Fantastic pension scheme. 25 days annual leave plus 8 bank holidays. NOTE : Our client welcomes applications from both commercial and ex-military candidates. Engineers leaving the Royal Navy, British Army or Royal Air Force with electrical, electronic, avionics, weapons engineering or mechanical engineering experience are strongly encouraged to apply.

Our client is a leading manufacturer of bespoke engineering equipment, and, due to continued expansion, they are now seeking a Field Service Engineer to join their team. The successful candidate will be home based, covering Reading, Chippenham, Oxford and Basingstoke, carrying out installation, commissioning, calibrating, servicing and fault-finding activities on customer sites. Please note, this role does include working away from home to suit business needs, in return you will receive additional overnight payments and all expenses covered. Field Service Engineer Responsibilities: Carry out commissioning, calibration and servicing of bespoke engineering equipment on customer sites. Diagnose and repair electrical, electronic and electro-mechanical faults. Ensure all work is completed in accordance with company procedures and customer site requirements. Provide excellent customer support and technical advice when on site. Travel regularly throughout the designated regional area with occasional overnight stays where required. Promote high standards of Health & Safety and quality compliance at all times, adhere to site safety regulations, permit to work systems and risk assessments. Field Service Engineer Requirements: NVQ Level 3 (minimum) in an Electrical, Electronic, or Mechanical engineering. Strong electrical fault-finding and diagnostic capabilities. Previous experience working with calibration equipment. Ability to read and interpret engineering schematics and technical drawings. Self-motivated with the ability to work independently. Flexible approach to travel and customer site work. IT literate with experience using service reporting systems. Full UK driving licence. Field Service Engineer Benefits: Salary 46,000 to 48,000 DOE. Company car or car allowance provided. Overtime opportunities available. Additional payments when working away from home. Mobile phone, laptop, tools and test equipment supplied. Fantastic pension scheme. 25 days annual leave plus 8 bank holidays. NOTE : Our client welcomes applications from both commercial and ex-military candidates. Engineers leaving the Royal Navy, British Army or Royal Air Force with electrical, electronic, avionics, weapons engineering or mechanical engineering experience are strongly encouraged to apply.

We re looking for a skilled Automation Service Technician to provide technical support, maintenance, and continuous improvement for automated warehouse solutions. What You ll Do: Deliver technical support and preventive/corrective maintenance on automated systems Carry out software updates, system enhancements , and emergency repairs Supervise electrical and mechanical adjustments on-site Analyse and diagnose electrical, mechanical, and PLC control issues Support ramp-up phases of new automated warehouse installations Plan, quote, and execute after-sales service jobs Coordinate with third-party service companies Maintain technical documentation and reports (incidents, improvements, PMs) What You ll Bring: Experience in automation, industrial maintenance, or commissioning Background in automation, robotics or electronics (electrical bias preferred) Strong customer-facing and troubleshooting skills Knowledge of PLC programming (Siemens Step7, TIA Portal) Familiarity with industrial communication protocols (Profibus, Profinet) Ability to read schematics, diagnose faults , and manage multiple tasks UK driving licence & passport , with willingness to travel and cover out-of-hours work Bonus if you have experience in the warehousing or logistics installation industry Benefits: Permanent position with a market-leading international company Competitive salary + overtime opportunities Fully expensed company car/van Ongoing training and development in the latest technologies Work from home with autonomy and flexibility Join a highly skilled and supportive team Opportunity to grow your career in one of the most critical sectors today: logistics and automation.

Senior Test Development Engineer Location: Glenrothes or Livingston About the role: Responsible for the design, manufacture, verification and validation, along with through life technical support of board level, sub-system and system level test equipment. Skills: • Test software design • Excellent knowledge of analogue and digital electronic circuit design • Ability to write comprehensive technical design documentation • Proven knowledge in handover and management of designs in production • Excellent hardware troubleshooting skills • Able to support/debug system integration • Must be eligible for MOD Security Clearance to a minimum of SC level Highly Desirable: • Significant test development in a safety critical industry • Use of Mentor Graphics schematic entry and PCB layout tools • Understanding of common test architectures PXI/d LXI • Measurement Uncertainty and its application in test equipment design and validation • Software Certification or detailed knowledge of: NI LabView, NI CVI, NI TestStand, C# • Design of mix signal circuits • High speed serial networks • An appreciation of RF electronics • Knowledge of power supply design Responsibilities • Design of functional test equipment for circuit cards, sub-assemblys and systems. • To take responsibility for the design and overall quality of the test equipment and provide leadership and guidance for junior engineers. • Documentation of design specifications and implementation details. Take part in design reviews. Upholding of design standards and methodologies. • Realisation of complex system requirements to provide robust and reliable test hardware solutions. • Responsibility for the complete implementation of detailed technical items and an understanding/appreciation of system level items. • Collaboration with other team members (including both hardware and software engineers) to agree system designs, interfaces and protocols etc. • Development of appropriate test hardware, test software and procedures, both informal and formal, to prove the correct operation of hardware. • Provide support to manufacturing answering product queries & resolving technical issues. • Provide support for the test hardware and manage obsolescence throughout its lifecycle. • Monitoring and reporting of progress of test development to immediate supervisor and development team. • Proactively support company compliance to Health and Safety legislation through adherence to company polices, processes and practices. • Ensure that all business activity is conducted in line with company values, policies and ethics codes of conduct. • Undertake any other activity as reasonably requested by management • Application of Design Review Processes • Accountable for engineering specific risks and opportunities. • Key contributor at Gate/Design reviews • Provides guidance of Test Development processes and tools. • Contribute to section/business area resource planning with a working understanding of Microsoft Project tools. • Test Engineering Lead for a small/medium scale test engineering program • Ability to identify and engage the appropriate SMEs to support the Test Development Engineering activities. • Contributor/Approver for standard/tailored test development process including Design Review gates and content • Key interface to external customers/suppliers.

An exciting opportunity has arisen for a Principal Electronics & Embedded Software Engineer to join a team developing innovative medical and technology products, taking ideas from concept through to manufacture for some of the world's leading companies. The business has expanded its global capability while maintaining a reputation for exceptional engineering, strong project leadership, and delivery within regulated and safety-critical markets. This role sits within a rapidly growing technical team developing complex electromechanical products from concept through to manufacture. This position is ideal for an experienced Principal Electronics & Embedded Software Engineer looking to step into a principal-level role, lead multidisciplinary teams, and take ownership of full product architectures while contributing to business growth and client development. Main Responsibilities of the Principal Electronics & Embedded Software Engineer (Cambridge): Develop electronics and embedded software(C/C++) for diverse and technically complex new products Lead the integration of electromechanical product designs through to manufacture and production transfer Take technical ownership of product architecture from concept generation through to launch Deliver technical progress to clients and, over time, lead multidisciplinary project teams Contribute to requirements definition, specification development, schematic capture, PCB layout, hardware bring-up, debugging, and product validation Support project planning, resourcing, and leadership activities Build strong client relationships and support the conversion of new opportunities into commercial contracts Requirements of the Principal Electronics & Embedded Software Engineer(Cambridge): Proven industry experience designing, prototyping, and testing electronic circuits and systems, including embedded software development in C/C++ Strong practical electronics skills including soldering, PCB rework/modification, wiring, and use of common laboratory test equipment Experience across the electronic product development lifecycle from concept through to prototype and manufacture Ability to work effectively within cross-disciplinary teams, with strong written, verbal, and presentation skills A First or 2:1 degree in Engineering from a leading university (UK top 10 or equivalent) Eligibility to work in the UK (visa sponsorship not available) Experience in project planning, leadership, or team coordination would be advantageous Working Pattern & Benefits: Full-time, permanent role Competitive salary and performance-based bonus structure Career development support including mentoring and personal training budgets Opportunity to work on innovative, safety-critical products in regulated international markets Exposure to multinational clients and potential travel opportunities Ethical working environment focused on improving lives through engineering excellence To apply please send your CV to (url removed), or for more information contact Mike Belmar on (phone number removed).

Embedded Software Engineer Cardiff 26959/580 45,000 - 50,000 & Bonus, Healthcare plan and more Benefits Package: o 45,000 - 50,000 starting salary o Company bonus o Group Pension Scheme o Private Medical Scheme including Healthcare Cash Plan o Life Assurance x 4 annual salary o Critical Illness Cover and Income Protection o A structured training and development programme, suited to individual needs Part of a successful international organization, this high-tech manufacturer has developed an enviable reputation for product quality and innovation. They are currently undertaking their next phase of recruitment and are looking to recruit an Embedded Software Engineer with Firmware development and debugging skills join their expanding business. Your role: Working in a small, versatile team, you will be involved in product design and sustaining activities on a range of electronic based products. Your responsibilities will include: Implementation of embedded firmware designs and test solutions pimarily in C Firmware development and de-bugging embedded systems Using Python and C# for test and tool development, with the creation of design documentation. Knowledge, Skills & Experience: o Engineering Degree or equivalent in a related discipline o At least 3 years experience in Software, Embedded Firmware development o Good working knowledge of low programming languages (C/C#) and the ability to use standard development software: debuggers, editors, compilers. For further information please email (url removed) Code: INDENM If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Electronics Production Technician (Fixed Term) When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. When your groceries arrive at your door or you sign for your online parcel, there's a good chance one of our software, telematics or proof-of-purchase solutions has played a part. At Microlise, we help some of the UK's leading retailers, logistics providers and household brands operate more efficiently through innovative technology solutions. We're looking for an Electronics Production Technician to join our Manufacturing team on a fixed-term contract. This is a hands-on role where you'll repair, test and configure electronic equipment ready for deployment to customer sites. Working to high quality standards, you'll play an important role in ensuring our products are delivered accurately, safely and on time. Whether you have previous experience in electronics, manufacturing or engineering, or you're looking to develop your technical skills, we'll provide the training and support you need to succeed. Please note this role is on a Fixed Term Basis until the end of December 2026. What you'll be doing Repair, test and configure electronic equipment following documented procedures Complete work within agreed timescales while maintaining quality standards Ensure product build and testing standards are consistently achieved Maintain accurate electronic records using internal systems Work closely with colleagues across Manufacturing, Service Centre, QA and Supply Chain to maximise efficiency Maintain high standards of housekeeping and adhere to workshop Health & Safety procedures What we're looking for Basic IT skills, including experience using databases, spreadsheets or Microsoft Office Strong attention to detail and a commitment to quality Ability to follow written instructions and processes accurately A proactive team player who can also work independently Good understanding of workplace Health & Safety practices Excellent timekeeping and reliability An interest in electronics, engineering, manufacturing or technical products Working Pattern This is a full-time role, working on-site at our Head Office in Eastwood, Nottingham. The working hours are 8am 4:30pm, Monday to Thursday, then 1:30pm finish on Friday! Why Microlise? Proudly Midlands-based, Microlise has been operating for over thirty years, and in July 2021 became a Publicly Listed Company with shares trading on the London Stock Exchange. Our growing business is guided by our culture which drives the way we behave, the way we work, the way we connect with our customers, and the way we support and develop our people. Full support and training to ensure you are well equipped to succeed in your role Invested in employee health and well-being with over 20 mental health first aiders in the business 25 days holiday, excluding bank holidays, increasing with service Private medical insurance with Vitality Health including rewards for members such as: Apple Watch, discounted gym membership and many more! Employee Assistance Programmes Free Costco membership, 20% off EE mobile and line rental, and other local discounts Great staff extras: Easter eggs, yearly BBQ, Christmas gifts and annual staff awards Recruitment Process For successful candidates, interviews will take place whilst the advert is still live, so don t delay getting your application in! Recruitment Agencies Whilst we make every effort to directly source candidates for our live roles, we do have a very small preferred supplier list on the occasion we may require additional support. We therefore do not accept speculative CVs and/or cold calls to our Recruitment Team or Hiring Managers. Please note: the successful candidates job title will be Manufacturing Engineer, in line with our organisational structure.

Safran Test and Development Engineer Pitstone, Buckinghamshire On Site Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our R&D Test team as a Test and Development Engineer at our Pitstone site. Your Role As a Test and Development Engineer at Safran Electrical & Power you will work with the latest in aerospace technology to plan, organise and execute testing to support the development and qualification tests performed on Safran products. You will support maintenance of the current and qualification testing capabilities, ensuring the team is always a step ahead with innovative testing processes and systems. You will perform data analysis of test results, utilising your analytical capabilities to assess trends in the data and identify any product concerns, offering solutions to any issues. Performing Electrical, Mechanical development and qualification tests on Safran electrical and Power products using high speed drives in conjunction with electrical, electronic and mechanical equipment and analogue and digital instrumentation. Carry out mechanical and electrical testing of Safran Group products. Mechanical equipment maintenance and installation. Hydraulic circuit construction, using solid and flexible piping. Installing system wiring in test cells, both high and low current. Modify existing test rigs to accept new equipment / components. Mechanical assembly of prototypes / development units. What You'll Bring An Engineering-related qualification (mechanical or electrical) and experience in electrical or mechanical development activities. Ability and knowledge of test rig assembly and testing using a range of laboratory instrumentation and computer packages. A level of development / certification knowledge and experience e.g. basic understanding of aspects of Development Engineering including Compliance Verification, Technical Risk, compilation of technical documentation, and use of instrumentation. Able to follow procedures and clear instructions whether working independently or as part of a team. Have a positive attitude and flexible, proactive approach to all aspects of work. Ability to work under pressure to meet program deadlines. Desirable - A basic knowledge of rotating machines, 3 stage and permanent magnet machines Desirable - Experienced in Data Acquisition System and Analysis tools (i.e. Dewesoft, Labview & DasyLab) We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation.

Role: Robotics and Motion Control Engineer Location: Tewkesbury, 1-day WFH per week Salary: £55,000 - £70,000 Description of a Robotics and Motion Control Engineer As a result of continuing expansion, we are recruiting a robotics and motion control development engineer to join our team and help us designing and developing the next generation of our robotic and motion control systems. We have developed a complete industrial robotics solution with kinematic and dynamics algorithms, path and trajectory planning, and other advanced mathematical solutions. We design and test our own robotics scripting language and develop new commands and structures. Our Motion Coordinators are used internationally for industrial high-speed robotic and machine control, and incorporate advanced algorithms, software and electronics - including 64-bit multicore ARM processors and FPGA s. The role will involve: Leading and owning our robotic and motion control system development roadmap Engineering research and algorithm development The design, development, implementation and delivery of our robotic solutions Direct contact with customers and real applications, via our application development teams Skills Required as a Robotics and Motion Control Engineer Applicants must have a good degree, masters or PhD in Robotics, Mechatronics, Mathematics or strongly related discipline. They must be able to demonstrate a solid understanding of the principles behind industrial motion and robotic control, gained over at least 4 years of experience, ideally on industrial or high reliability projects. Experience with the following will be advantageous: Good understanding of kinematics and dynamics for industrial robots. Algorithm development MathWorks MATLAB High level programming languages; for example, C, Python, MATLAB / Simulink , ABB Rapid Experience with different industrial robots and systems Knowledge of interfacing automation hardware with electrical systems, sensors and actuators; and the basic principles of machine control Control systems Servo and stepper motors A broad personality and ability to communicate effectively in English is required. Applicants must be legally entitled to work in the UK. Benefits : Pivotal role in an engineering led company Work with the latest technology motion control Competitive salary, profit related pay, pension contribution and flexible working Occasional international travel Competitive salary Membership of Profit Related Pay (PRP) bonus scheme Matched personal pension contributions scheme of up to 5% Death in service insurance at 3x basic annual salary Access to an employee healthcare and well-being cash plan Access to an Employee Assistance Programme (EAP) and Remote GP services Remote/hybrid working option up to 25% of working time 25 days holiday per annum + your birthday 1 additional day holiday after 5 years and 10 years of service Robotics and Motion Control Engineer Robotics and Motion Control Engineer Robotics and Motion Control Engineer

Project Engineer About the role: Blighter Surveillance Systems is looking to recruit a Project Engineer to help deliver and develop Blighter radar systems and projects. Responsibilities of the role include; System-level design, architecture, and specification of systems and installations using Blighter Radars. Working with both our sales team and customers to establish and develop their requirements. Delivering customer demonstrations & training. Planning & overseeing radar test and development trials. Working with the support team to deliver completed solutions and systems. Supporting existing & future systems by working hands-on with Blighter radars as required. The role is based at our main office but will sometimes require visits to supplier and customer locations both in the UK (4-5 times/year) and overseas (2-3 times/year). The engineering team at Blighter is small and flexible. We are looking for someone capable of working on their own initiative, but who also appreciates the vital importance of collaborating and communicating effectively with other engineers and end users. In-depth knowledge of radars is not required - training on Blighter radars and systems will be provided, with many opportunities for hands-on experience. You will have the following skills and abilities: A demonstrable ability to design, develop, analyse, and think at a system level. Experience working with formal system requirements. An appreciation of multiple engineering disciplines. Experience in a customer-facing role. The ability to create and maintain system diagrams and documentation. Experience installing and configuring software on Windows-based computers. Computer networking (at intermediate level or above). A practical and hands-on approach. Excellent written and spoken communication skills. You will have the following background and experience: Degree-level education in an applicable engineering discipline, e.g.; o Electrical or Electronic Engineering o Software Engineering/Computer Science o Mechanical Engineering o Aerospace Engineering o Robotics/Mechatronics Engineering 2Y+ experience in security, defence, or other mixed-discipline high-tech industry The following skill & experience would be beneficial, but not required: Experience of radar systems. Industrial experience from an aerospace systems, sensors, or ISTAR/C4ISR/ESM domain. The ability to understand (and perhaps design) simple electronics. The ability to write simple software from scratch (e.g. python scripts) or amend or tweak more complex software Recent graduates who have completed a sandwich course, year in industry, or with other significant relevant working experience will also be considered. The requirement for occasional travel means that a driver s licence will be considered beneficial. About Blighter: BSS is a UK-based electronic-scanning radar and sensor solution provider delivering an integrated multi-sensor package to systems integrators comprising Blighter electronic-scanning radars, cameras, thermal imagers, trackers and software solutions. Blighter Surveillance Systems (BSS) is looking to increase its in-house design and development team in support of new product developments and enhancements. We are located 10 miles south of Cambridge in the semi-rural village of Great Chesterford, with ample parking, a railway station on the Liverpool St. Cambridge line and easy access to the M11.

Electronics Engineer Electronic Test Systems - Essex Hybrid - Competitive. An Electronics Engineer with proven experience relating to Digital/ Analogue/ Power Circuit design and with the ability to develop Automated Test Equipment (ATE) within a production environment, will be rewarded by an established High-Tech Company offering Hybrid working and generous salary package. The successful Electronic Test Systems Engineer will take responsibility for developing and supporting automated test systems that enable scalable production of embedded hardware products; engaging in the product and board design cycle to drive testability and define ATE requirements. Skills and Experience for the Electronic Test Systems Engineer should include: Proven experience of developing or supporting Automated Test Equipment (ATE) within a production environment. Good knowledge of digital/analogue circuits, power electronics and high-speed interfaces. Proficiency with test instrumentation and test automation tools. PCB design. Electronics Degree or equivalent. Experience of working with a high-reliability industry such as aerospace, Defence, rail or similar. To find out more on this rewarding Electronics Test Systems Engineer role, please apply in confidence now.

Our client has an opportunity for a Senior Engineer- Hardware in the Loop to join them on a contract basis for 6 months with possible extension. Role : Senior Engineer- Hardware in the Loop Location : Stevenage, fully onsite Hourly Rate : 55 per hour via Umbrella, inside IR35 Clearance : SC required before starting What you'll be doing: As a HWIL engineer, you will be responsible for developing and maintaining new and existing RF equipment and working with multi-disciplinary teams to combine RF, electronics engineering and software development to produce new capabilities that enable HWIL to run new simulations - Produce new RF targets for missiles to track, simulated ECM. testing, root cause analysis, design, development, integration. You will be able to adapt to new engineering situations and be comfortable in abstracting detail in order to understand the simulation and missile's behaviour Requirements : Radio Frequency design or testing System performance analysis Interface debugging and system integration System design for real-time applications If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

Blue Arrow is urgently recruiting for a Software Engineer to join our clients growing Automotive Manufacturing team based in the Llanelli area. Contract : Permanent Salary : Up to 40,000p.a Hours of work : 37 hours per week: Mon-Thurs 8:30-17:00 & Fridays 9:00-15:00 Travel expected: Cannock in West Midlands and Germany (infrequently) Job Summary: Our client is seeking an experienced automotive Software Engineers to join their existing team. The post involves designing and developing software in the fields of diagnostics, electric vehicles, and industrial installations to support our position as one of the leading companies in the battery remanufacturing, test, and recycling sectors. This position entails periodic travel to Cannock in the West Midlands, and Germany. Accordingly, possession of a full, clean driving license is a mandatory requirement for the role. Key Responsibilities: Creating and documenting requirements Carrying out updates on existing codebase Creating new software products Creating test plans, implementing and documenting results Support colleagues with advice and sharing of knowledge Some travel to other UK sites, USA, Europe and China may also be required Versioning & storing source code in accordance with company management systems (GIT) Essential Knowledge and Experience: Knowledge of a .net language (C#, VB.net) - Able to independently build windows forms/WPF applications Knowledge of communication protocols such as Modbus, SPI, SCPI, CAN, and other automotive/Industrial protocols Electronics/Electrical knowledge supporting EV testing Working with version control systems Perform unit tests and debug own code Educated to Degree Level (Electronics, Computer Science, Maths with Computing) A full UK Driving License (clean record)- essential Desirable Attributes: Experience of the following would be advantageous: Trained to test hazardous voltage Additional programming languages Passion for continuous improvement and lean methodologies Comfortable working in a fast-paced, operationally focused environment Personal Attributes: Excellent communication skills both written & verbal Ability and initiative to learn and research new concepts, ideas and technologies Ability to work in a team orientated, collaborative environment Ability to prioritise and execute tasks in a highly demanding environment If you feel you are the right candidate for this role then please submit your CV for immediate response. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.

Software Team Lead Bristol (Hybrid, minimum 2 days in the office) Full-Time (37.5 hours per week) Join us in making sure no one is left without a voice. At Smartbox, our assistive technology empowers people with disabilities who experience speech difficulties to express themselves, connect with others, and live more independent lives. We re proud to be a global leader in augmentative and alternative communication (AAC), supporting people across the UK, US, Europe, and beyond, but what truly sets us apart is our people passionate, collaborative, and driven by the impact our products have every day. If you re motivated by meaningful work and want to apply your technical expertise to something that genuinely changes lives, we d love to hear from you. The Opportunity We re looking for a Software Team Lead to guide one of our cross-functional product teams, shaping innovative AAC solutions across Windows, iOS, and cloud-based platforms. This is a hands-on leadership role. You ll lead and support a talented team, while also contributing directly to the codebase, setting the standard for engineering excellence and continuous improvement. You ll work closely with Developers, Designers, Product Specialists, and, uniquely, our users, ensuring everything you build delivers meaningful real-world outcomes. What You ll Be Doing: Lead, mentor and grow a talented team of Software Engineers and QA specialists, supporting them to do their best work. Collaborate with product and technical leaders to shape roadmaps, priorities and meaningful outcomes. Contribute directly to high-quality, scalable solutions across the full software lifecycle, including clean, maintainable C# (.NET 10) code. Champion modern engineering practices, including practical use of AI-assisted development tools to improve productivity and code quality. Build a strong, user-focused engineering culture, guided by real feedback, data and genuine needs. Drive agile delivery through collaborative planning, continuous improvement and shared ownership of outcomes. Work on complex, real-world challenges where reliability, usability and performance truly matter, and where your decisions directly impact people s daily lives. What We re Looking For We re looking for a combination of deep technical expertise, curiosity, and purpose-driven thinking. Essential Experience: Proven experience leading high-performing agile software teams. Strong background in C#, .NET (or similar languages such as Java or C++). Demonstrable ability to deliver measurable user or business outcomes. Experience using AI-assisted development tools to improve team effectiveness. Excellent understanding of software engineering best practices, testing, and architecture. Confidence working across the stack, from UI to backend systems. Strong communication and leadership skills, with experience developing others. Some Areas We Often Work with Include: Cloud-based products, secure deployment, permissions and thoughtful resource management. Modern software tools and frameworks, including WPF / XAML, Avalonia, Entity Framework, SQL Server, Android, JavaScript and React.js. Reliable .NET build and deployment pipelines, using tools such as TeamCity, Jenkins or similar. AAC, assistive technology and customer-led product development, alongside coaching, people support and continuous improvement. Why Join Smartbox: Purpose-driven work with real-world impact. Collaborative and supportive culture. Hybrid working and flexibility. Opportunities to grow, lead and shape future products. Strong benefits package and wellbeing support. Inclusion and Sustainability At Smartbox, we re committed to creating a workplace where everyone feels valued, supported and able to thrive. We re proud to be a Disability Confident Employer and welcome applications from people of all backgrounds. If there s anything we can do to support you during the recruitment process, please feel free to let us know within your application. We also aim to build sustainability into everything we do, from how we design our products to how we operate as a business. Ready To Make a Difference If you re excited by the idea of combining cutting-edge electronics engineering with real-world impact, we d love to hear from you. Apply now and help us ensure no one is left without a voice.

Fire & Security Engineer Salary: £(phone number removed) (typically £70,000 with overtime) Location: Harlow / Brentwood area, covering Northern Home Counties Are you a multi-skilled engineer with strong CCTV, intruder and access control experience, alongside a good working knowledge of fire alarm systems? Our client is expanding its field engineering team and is looking for an experienced Fire & Security Engineer to support a varied portfolio of commercial, education and infrastructure sites. You will be responsible for planned and reactive maintenance, fault diagnosis, repairs, small works and occasional installation activity across a broad range of security and fire systems. This role is particularly well suited to an engineer with strong IP CCTV and electronic security experience who is also confident servicing and repairing fire alarm systems. You will work independently across your allocated area, managing your schedule, communicating with customers and ensuring all work is completed safely, professionally and to a high technical standard. Job Description Duties will include: Servicing, maintaining and repairing CCTV, intruder alarm, access control and door entry systems Diagnosing faults on IP and analogue CCTV networks, control panels, devices, circuits and associated equipment Carrying out planned and reactive maintenance on fire alarm systems Completing small works, system alterations and minor installation projects Attending customer sites covering Northern Home Counties Providing clear technical updates and recommendations to customers and site contacts Completing service reports, job documentation, risk assessments and method statements Ensuring van stock, tools and test equipment are maintained and accurately recorded Supporting occasional associated systems work, including gates, barriers, disabled refuge or nurse call systems Participating in an out-of-hours call-out rota, currently approximately one week in twelve Person Specification Applicants should be able to demonstrate: Previous experience as a Fire & Security Engineer, Security Systems Engineer or similarly multi-skilled field engineer Strong practical knowledge of IP CCTV, intruder alarms, access control and door entry systems Experience servicing, fault-finding and repairing fire alarm systems The ability to diagnose and resolve technical faults independently Experience working with systems such as Hikvision, Dahua, Galaxy, Texecom, Paxton, PAC, Videx, Gent, Advanced, Notifier, Morley or C-tec A good understanding of health and safety procedures and safe site working practices Strong customer service and communication skills The ability to manage a mobile workload across multiple sites A full UK driving licence Experience with gates, barriers, disabled refuge systems or nurse call systems would be beneficial, although additional training can be provided. Salary and Benefits The role offers a basic rate of £(phone number removed) per annum, equivalent to approximately £21 £24 per hour. Travel is paid after the first 30 minutes each way, with overtime paid at enhanced rates: Evenings paid at 1.5 times the standard rate Late shifts and weekends paid at double time Additional allowance for participation in the call-out rota The wider benefits package includes: Company van and fuel Laptop and mobile phone Tools and test equipment Healthcare Pension scheme 25 days holiday plus statutory bank holidays Regular overtime opportunities Ongoing technical training and development This is a strong opportunity for an experienced engineer who enjoys varied technical work and wants to join a growing business offering a competitive basic salary, paid travel, excellent overtime rates and exposure to a wide range of fire and security technologies. To apply, please submit your CV by clicking on the relevant links. If successful, you will be contacted by one of our consultants within 3 working days. Unfortunately, due to the volume of applications we expect to receive for this vacancy, if you do not hear from us within this time, you should presume your application has been unsuccessful on this occasion. Grassroots Recruitment is acting as a recruitment agency and a recruitment business in respect of this vacancy. Grassroots Recruitment is an equal opportunities employer and recruiter. We welcome applications from all sections of the community, regardless of age, race, sex, sexual orientation, marital status, religion or disability.

Fire & Security Engineer, Hertfordshire Are you an experienced Fire & Security Engineer with strong CCTV, intruder and access control knowledge, looking for a well-paid regional role with varied technical work? Our client is recruiting additional engineers to support customers across the South East, with opportunities available for candidates based around Stevenage, Cambridge, Milton Keynes and Northampton. You will work across a varied portfolio of commercial, education and infrastructure sites, carrying out planned maintenance, reactive repairs, fault-finding, small works and occasional installation activity. The role requires a strong grounding in electronic security systems, particularly IP CCTV, intruder alarms, access control and door entry. You will also need practical fire alarm experience and the confidence to diagnose faults, carry out repairs and complete servicing work independently. This would suit a capable field engineer who enjoys technical variety, takes pride in delivering a professional service and is comfortable managing their own regional workload. Job Description Duties will include: Carrying out planned and reactive maintenance across fire and electronic security systems Servicing and repairing IP and analogue CCTV, intruder alarms, access control and door entry equipment Fault-finding across control panels, networks, devices, circuits and associated system components Maintaining, testing and repairing fire alarm systems across a range of customer sites Completing small works, system alterations, upgrades and minor installation projects Liaising with customers, facilities teams and site contacts regarding faults, repairs and recommended works Producing accurate service reports, job sheets, risk assessments and other technical documentation Managing van stock, tools, test equipment and replacement parts Supporting work on gates, barriers, disabled refuge or nurse call systems where required Participating in an out-of-hours call-out rota, currently approximately one week in twelve Person Specification Applicants should be able to demonstrate: Previous experience as a Fire & Security Engineer, Security Systems Engineer or Multi-Skilled Engineer Strong practical knowledge of CCTV, intruder alarms, access control and door entry systems Experience working with IP-based CCTV systems and associated networking Proven ability to service, fault-find and repair fire alarm systems Experience with manufacturers such as Hikvision, Dahua, Galaxy, Texecom, Paxton, PAC, Videx, Gent, Advanced, Notifier, Morley or C-tec The ability to diagnose and resolve technical issues without close supervision Good knowledge of health and safety requirements and safe site working practices Strong customer-facing communication skills and a professional approach The ability to organise a mobile workload and travel throughout an allocated regional area A full UK driving licence Salary and Benefits The role offers a basic rate of £20 £24 per hour , equivalent to approximately £(phone number removed) per annum , depending on experience. Travel is paid after the first 30 minutes each way. Additional earning opportunities include: Overtime paid at 1.5 times the standard rate during evenings Late shifts and weekend work paid at double time A separate allowance for participation in the call-out rota The wider package includes: Company van and fuel Laptop and mobile phone Tools and test equipment Healthcare Pension scheme 25 days holiday plus statutory bank holidays Regular overtime opportunities Ongoing training across fire and security technologies This is an excellent opportunity to join an established and growing engineering business offering a strong basic salary, paid travel, enhanced overtime and a varied workload across modern fire and security systems. To apply, please submit your CV by clicking on the relevant links. If successful, you will be contacted by one of our consultants within 3 working days. Unfortunately, due to the volume of applications we expect to receive for this vacancy, if you do not hear from us within this time, you should presume your application has been unsuccessful on this occasion. Grassroots Recruitment is acting as a recruitment agency and a recruitment business in respect of this vacancy. Grassroots Recruitment is an equal opportunities employer and recruiter. We welcome applications from all sections of the community, regardless of age, race, sex, sexual orientation, marital status, religion or disability.