Job Title: Mechanical Technician Location: Oxfordshire, OX14 3DB, UK Job Type: Full-time contract, 12 Months Work Model: Onsite Minimum Requirement: Primarily to support the MAST-U Load Assembly Team during shutdown, including preparation for shutdown activities. Secondarily to support general mechanical tasks within the Tokamak Systems Unit when required. Mechanical systems to include vacuum, cooling, pressurised and electro-magnetic. This shall include construction of new systems and maintenance of existing systems including fault finding, and repair. As a mechanical technician you would be expected to supervise mechanical fitters and other junior craft effort. The exact duties will be determined by the individual's skills and experience. Perform maintenance, improvements and modifications of MAST-U by undertaking a wide range of works including large installation programmes during shutdowns and interventions to maximise the efficiency and availability of the system during operations as a team member. To document processes/procedures for the maintenance/installation/testing of equipment. Compiling work packages for work to be carried out, including writing safe systems of work. Support large scale/prestigious MAST-U projects. Such as in-vessel works, centre column and TF circuits and cooling systems. Provide mechanical technician support to the Plant Responsible Officers (PRO) and their deputies. All mandatory training will be provided by Dept. for these systems and activities. Set and maintain high levels of safety on MAST. Promote good behavioural safety to drive improvements in culture, working conditions and professionalism. Support activities which support safety, including monitoring documentation such as risk assessments, keeping areas tidy and under control. Practice continual improvements in safety practices and behaviours. Adhere to regulatory requirements when working on plant. Understand and practice Construction (Design and Management) Regulations 2015. Expected to work mostly without direct continuous supervision; however, given the high hazard and complex nature of the work at Dept. aspects of the role may be supervised by SQEP personnel. Supervise contract staff, fitters and general workers on the any number of MAST-U systems. Must have served a recognised Apprenticeship or similar. Qualifications: Level 3 NVQ Certificate in Mechanical Engineering (Equivalent qualifications to those stated will be considered). Worked in an industrial setting, specifically mechanical assembly and maintenance, would be desirable. Experience of vacuum systems and understanding of electrical work, would be desirable. Knowledge of modern manufacturing techniques. Experience of working under a Written Safe System of Work/Method Statements/Risk Assessments.
May 15, 2026
Contractor
Job Title: Mechanical Technician Location: Oxfordshire, OX14 3DB, UK Job Type: Full-time contract, 12 Months Work Model: Onsite Minimum Requirement: Primarily to support the MAST-U Load Assembly Team during shutdown, including preparation for shutdown activities. Secondarily to support general mechanical tasks within the Tokamak Systems Unit when required. Mechanical systems to include vacuum, cooling, pressurised and electro-magnetic. This shall include construction of new systems and maintenance of existing systems including fault finding, and repair. As a mechanical technician you would be expected to supervise mechanical fitters and other junior craft effort. The exact duties will be determined by the individual's skills and experience. Perform maintenance, improvements and modifications of MAST-U by undertaking a wide range of works including large installation programmes during shutdowns and interventions to maximise the efficiency and availability of the system during operations as a team member. To document processes/procedures for the maintenance/installation/testing of equipment. Compiling work packages for work to be carried out, including writing safe systems of work. Support large scale/prestigious MAST-U projects. Such as in-vessel works, centre column and TF circuits and cooling systems. Provide mechanical technician support to the Plant Responsible Officers (PRO) and their deputies. All mandatory training will be provided by Dept. for these systems and activities. Set and maintain high levels of safety on MAST. Promote good behavioural safety to drive improvements in culture, working conditions and professionalism. Support activities which support safety, including monitoring documentation such as risk assessments, keeping areas tidy and under control. Practice continual improvements in safety practices and behaviours. Adhere to regulatory requirements when working on plant. Understand and practice Construction (Design and Management) Regulations 2015. Expected to work mostly without direct continuous supervision; however, given the high hazard and complex nature of the work at Dept. aspects of the role may be supervised by SQEP personnel. Supervise contract staff, fitters and general workers on the any number of MAST-U systems. Must have served a recognised Apprenticeship or similar. Qualifications: Level 3 NVQ Certificate in Mechanical Engineering (Equivalent qualifications to those stated will be considered). Worked in an industrial setting, specifically mechanical assembly and maintenance, would be desirable. Experience of vacuum systems and understanding of electrical work, would be desirable. Knowledge of modern manufacturing techniques. Experience of working under a Written Safe System of Work/Method Statements/Risk Assessments.
Are you ready to spark a new chapter in your career with a large global manufacturer that's literally shaping the future of British industry? This isn't just a maintenance job; it's an invitation to join a world-class team at the forefront of sustainable production. With a landmark 1.5 billion investment driving a transition to cleaner and greener technology. If you thrive on continuous improvement and want your daily efforts to make a meaningful impact, we want to hear from you. Location: Llanelli (SA14) Salary: 30,846 plus 10% shift allowance This position follows a structured 2-week day craft pattern designed for balance: Week 1: Sunday - Thursday Week 2: Monday - Friday Holidays: 35 days per annum. Leading defined contribution scheme (10% employer / 6% employee contribution). Annual pay reviews, performance-related bonuses, and an extensive lifestyle discount scheme What You Will Do Working on a site that transforms 400,000 tonnes of steel annually, your daily efforts will keep the wheels of industry turning. Execute preventative and corrective maintenance on critical plant equipment. Fault-find and repair complex hydraulic and pneumatic systems, gearboxes, and process rolls. Interpret technical drawings and ensure all work meets high engineering and safety standards. Provide mechanical expertise to boost plant reliability and support technical investigations. Contribute to safety protocols and assist in training new team members. The ideal candidate will demonstrate We are looking for safety-conscious professionals who take personal pride in quality and service. Ideally HNC level, typically achieved through a craft or modern apprenticeship in mechanical engineering. Proven background in heavy industrial or plant environments. Strong fault-finding capabilities and a deep understanding of mechanical systems. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 15, 2026
Full time
Are you ready to spark a new chapter in your career with a large global manufacturer that's literally shaping the future of British industry? This isn't just a maintenance job; it's an invitation to join a world-class team at the forefront of sustainable production. With a landmark 1.5 billion investment driving a transition to cleaner and greener technology. If you thrive on continuous improvement and want your daily efforts to make a meaningful impact, we want to hear from you. Location: Llanelli (SA14) Salary: 30,846 plus 10% shift allowance This position follows a structured 2-week day craft pattern designed for balance: Week 1: Sunday - Thursday Week 2: Monday - Friday Holidays: 35 days per annum. Leading defined contribution scheme (10% employer / 6% employee contribution). Annual pay reviews, performance-related bonuses, and an extensive lifestyle discount scheme What You Will Do Working on a site that transforms 400,000 tonnes of steel annually, your daily efforts will keep the wheels of industry turning. Execute preventative and corrective maintenance on critical plant equipment. Fault-find and repair complex hydraulic and pneumatic systems, gearboxes, and process rolls. Interpret technical drawings and ensure all work meets high engineering and safety standards. Provide mechanical expertise to boost plant reliability and support technical investigations. Contribute to safety protocols and assist in training new team members. The ideal candidate will demonstrate We are looking for safety-conscious professionals who take personal pride in quality and service. Ideally HNC level, typically achieved through a craft or modern apprenticeship in mechanical engineering. Proven background in heavy industrial or plant environments. Strong fault-finding capabilities and a deep understanding of mechanical systems. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Embedded Software Engineer £40-80k DOE Cambridge Are you a software engineer who wants to work with some of the most high-tech companies in the world? One of the UK s leading consultancies is hiring software engineers to join their high-growth, driven, and extremely motivated team. They partner with clients from leading global brands to startups to identify growth opportunities through innovative solutions, taking pride in their success. They operate as a meritocracy and give leadership responsibilities based on skill rather than length of service. You can get promoted rapidly depending on your skill. Responsibilities as an Embedded Software Engineer: + Design and develop software applications and control algorithms using OO languages (C# and C++) and/or embedded code (C) + Collaborating with electronics, mechanical and systems engineers to integrate software with hardware components and robotics platforms Technical requirements for an Embedded Software Engineer: + Proficiency in C/C++, C#, or .NET for PC application development + Experience developing ARM Cortex MCUs + Professional experience utilising Docker containers + Strong understanding of software development lifecycle and version control (e.g., Git). Desirable experiences for an Embedded Software Engineer: + Experience with IEC 62304, ISO 13485, or FDA 21 CFR Part 820 + 3+ years of experience in a regulated industry Apply today to join a highly innovative and world renowned consultancy!
May 15, 2026
Full time
Embedded Software Engineer £40-80k DOE Cambridge Are you a software engineer who wants to work with some of the most high-tech companies in the world? One of the UK s leading consultancies is hiring software engineers to join their high-growth, driven, and extremely motivated team. They partner with clients from leading global brands to startups to identify growth opportunities through innovative solutions, taking pride in their success. They operate as a meritocracy and give leadership responsibilities based on skill rather than length of service. You can get promoted rapidly depending on your skill. Responsibilities as an Embedded Software Engineer: + Design and develop software applications and control algorithms using OO languages (C# and C++) and/or embedded code (C) + Collaborating with electronics, mechanical and systems engineers to integrate software with hardware components and robotics platforms Technical requirements for an Embedded Software Engineer: + Proficiency in C/C++, C#, or .NET for PC application development + Experience developing ARM Cortex MCUs + Professional experience utilising Docker containers + Strong understanding of software development lifecycle and version control (e.g., Git). Desirable experiences for an Embedded Software Engineer: + Experience with IEC 62304, ISO 13485, or FDA 21 CFR Part 820 + 3+ years of experience in a regulated industry Apply today to join a highly innovative and world renowned consultancy!
Senior Embedded Software Engineer £60-70k St. Ives If you want to develop yourself from a Senior to a Lead engineer with a leading company developing extremely precise systems. This is the role for you. Platform Recruitment is partnered with a global leader in extremely responsive control software for industrial automation, looking for a Senior Embedded Software Engineer. You ll be responsible for developing firmware & software, leading the software development team, and innovating the next generation of concepts. Responsibilities as an Embedded Software Engineer: Design, develop, optimise, and thoroughly test firmware and software for execution on bare-metal processors and embedded Linux/RTOS platforms Lead a cross-functional team of hardware and software engineers to define the requirements and lead the software development life cycle Requirements: Proven experience in leading firmware development for bare-metal and Linux/RTOS-based systems, with high proficiency in high-performance C/C++. Extensive knowledge of various communication protocols (e.g., TCP/UDP, SPI/I2C, CAN, RS232) High-level familiarity with electronics/schematics, and strong numerical/analytical skills Desirable skills for an Embedded Software Engineer: Experience developing on Arm Cortex platforms utilising either RTOS or bare metal Working knowledge of embedded security Experience with other embedded or high-level prototyping languages such as Rust, C#, or Python Apply now to develop the next generation of high-precision control software! Platform Recruitment: Platform recruitment covers a wide range of IT and Engineering positions, including C++, Embedded, Electronics, Mechanical, DevOps, Cloud, Support, Project Management, Technical Sales, and more.
May 15, 2026
Full time
Senior Embedded Software Engineer £60-70k St. Ives If you want to develop yourself from a Senior to a Lead engineer with a leading company developing extremely precise systems. This is the role for you. Platform Recruitment is partnered with a global leader in extremely responsive control software for industrial automation, looking for a Senior Embedded Software Engineer. You ll be responsible for developing firmware & software, leading the software development team, and innovating the next generation of concepts. Responsibilities as an Embedded Software Engineer: Design, develop, optimise, and thoroughly test firmware and software for execution on bare-metal processors and embedded Linux/RTOS platforms Lead a cross-functional team of hardware and software engineers to define the requirements and lead the software development life cycle Requirements: Proven experience in leading firmware development for bare-metal and Linux/RTOS-based systems, with high proficiency in high-performance C/C++. Extensive knowledge of various communication protocols (e.g., TCP/UDP, SPI/I2C, CAN, RS232) High-level familiarity with electronics/schematics, and strong numerical/analytical skills Desirable skills for an Embedded Software Engineer: Experience developing on Arm Cortex platforms utilising either RTOS or bare metal Working knowledge of embedded security Experience with other embedded or high-level prototyping languages such as Rust, C#, or Python Apply now to develop the next generation of high-precision control software! Platform Recruitment: Platform recruitment covers a wide range of IT and Engineering positions, including C++, Embedded, Electronics, Mechanical, DevOps, Cloud, Support, Project Management, Technical Sales, and more.
TECHNIA is looking for a Senior Simulation Engineer to join us based in Milton Keynes on a full-time, permanent basis, and in return, you will receive a competitive salary. About us At TECHNIA, we simplify product innovation with smart solutions that speed up time to market. Our expertise helps companies stay competitive by making processes efficient and transparent. In other words, we bring SMARTER PRODUCTS FASTER. We are a small entity but part of a global organisation. We are a PLM specialist, and we partner with Dassault Systems to deliver expert engineering services to clients. TECHNIA is a global leader in Product Lifecycle Management (PLM) and engineering solutions. As part of the Addnode Group, we empower innovation through technology, collaboration, and continuous learning. Our teams work with world-renowned brands across industries including life sciences, consumer goods, automotive, and aerospace. At the forefront of everything we do are our TECHNIA Values: Go Explore, Keep Learning, Build Trust, Work Together and we are looking for a Senior Simulation Engineer who believes that these values make us stronger and embrace them as their own. About the Senior Simulation Engineer role: We re looking for an experienced Senior Simulation engineer with strong technical expertise and a passion for solving complex engineering problems. You ll be confident using simulation tools alongside first-principles engineering, and able to turn analysis into clear, practical design recommendations. You should be a strong communicator, comfortable working with clients and leading technical discussions, with the ability to manage multiple projects and collaborate across teams. Experience mentoring others and contributing to continuous improvement or business development is desirable. A relevant engineering degree is required; chartership or progress towards it is a plus. Our Senior Simulation Engineer will: Perform advanced simulations of components, systems, and products using a range of CAE tools and methodologies Define and agree analysis scope based on customer requirements, providing technical leadership to stakeholders Apply first-principles engineering and hand calculations to validate and support simulation results Interpret analysis outputs and deliver clear, data-driven design recommendations Lead technical discussions and chair customer meetings, ensuring actions are tracked and delivered on time Develop, maintain, and enhance CAE standards, processes, and best practices across the organisation Mentor and support junior engineers, providing technical guidance and training Interface directly with clients to resolve complex technical challenges and deliver expert advice Produce high-quality technical reports, documentation, and presentations for diverse audiences Develop reusable simulation models and methodologies to improve efficiency and consistency Monitor and drive improvements in CAE tools, methods, and capabilities Support business development activities, including proposal writing and identifying new opportunities Collaborate with cross-functional teams including design, manufacturing, and commercial functions Oversee testing, validation, and prototype evaluation to support product development and verification Ensure compliance with internal processes, quality standards, and relevant regulatory requirements Manage analysis data, documentation, and quality assurance activities effectively Support trial planning, coordination, and execution where required Provide technical support to internal and external stakeholders Contribute to continuous improvement and innovation within the engineering function Undertake additional responsibilities aligned with role seniority Requirements to become our Senior Simulation Engineer: BEng in Automotive, Mechanical, or Aerospace Engineering, or a BSc in a relevant Engineering discipline Strong knowledge of product, system, and component analysis for project delivery Experience using Abaqus/CAE or Abaqus for CATIA Good understanding of engineering materials and their properties in design and analysis Proficient in Microsoft Office (Word, Excel, PowerPoint, Outlook) Demonstrable problem-solving skills and analytical thinking Strong presentation and communication skills Technical Skills: Hand calculations Structural analysis (linear and non-linear) Dynamic, modal, and vibration analysis Thermal and thermal stress analysis Personal Attributes: Strong teamwork and collaboration skills Good interpersonal and communication abilities We value our employees, and in return, as our Senior Simulation Engineer, we offer: We offer a dynamic, international environment and an exciting opportunity to work with impactful projects together with a dedicated team. Attractive Benefits package (Pension, healthcare and many more benefits) Competitive Salary Continuous training, support and focus on your personal and professional development A truly diverse working environment where differences are embraced and a family- friendly culture is promoted. TECHNIA has a Diverse and inclusive environment. We are looking for qualified candidates irrespective of gender, gender identity, sexual orientation, ethnicity, race, religion, national origin, disability, or age. If the role sounds interesting and you have what it takes to be successful as our Senior Simulation Engineer , then click apply today - we would like to hear from you!
May 15, 2026
Full time
TECHNIA is looking for a Senior Simulation Engineer to join us based in Milton Keynes on a full-time, permanent basis, and in return, you will receive a competitive salary. About us At TECHNIA, we simplify product innovation with smart solutions that speed up time to market. Our expertise helps companies stay competitive by making processes efficient and transparent. In other words, we bring SMARTER PRODUCTS FASTER. We are a small entity but part of a global organisation. We are a PLM specialist, and we partner with Dassault Systems to deliver expert engineering services to clients. TECHNIA is a global leader in Product Lifecycle Management (PLM) and engineering solutions. As part of the Addnode Group, we empower innovation through technology, collaboration, and continuous learning. Our teams work with world-renowned brands across industries including life sciences, consumer goods, automotive, and aerospace. At the forefront of everything we do are our TECHNIA Values: Go Explore, Keep Learning, Build Trust, Work Together and we are looking for a Senior Simulation Engineer who believes that these values make us stronger and embrace them as their own. About the Senior Simulation Engineer role: We re looking for an experienced Senior Simulation engineer with strong technical expertise and a passion for solving complex engineering problems. You ll be confident using simulation tools alongside first-principles engineering, and able to turn analysis into clear, practical design recommendations. You should be a strong communicator, comfortable working with clients and leading technical discussions, with the ability to manage multiple projects and collaborate across teams. Experience mentoring others and contributing to continuous improvement or business development is desirable. A relevant engineering degree is required; chartership or progress towards it is a plus. Our Senior Simulation Engineer will: Perform advanced simulations of components, systems, and products using a range of CAE tools and methodologies Define and agree analysis scope based on customer requirements, providing technical leadership to stakeholders Apply first-principles engineering and hand calculations to validate and support simulation results Interpret analysis outputs and deliver clear, data-driven design recommendations Lead technical discussions and chair customer meetings, ensuring actions are tracked and delivered on time Develop, maintain, and enhance CAE standards, processes, and best practices across the organisation Mentor and support junior engineers, providing technical guidance and training Interface directly with clients to resolve complex technical challenges and deliver expert advice Produce high-quality technical reports, documentation, and presentations for diverse audiences Develop reusable simulation models and methodologies to improve efficiency and consistency Monitor and drive improvements in CAE tools, methods, and capabilities Support business development activities, including proposal writing and identifying new opportunities Collaborate with cross-functional teams including design, manufacturing, and commercial functions Oversee testing, validation, and prototype evaluation to support product development and verification Ensure compliance with internal processes, quality standards, and relevant regulatory requirements Manage analysis data, documentation, and quality assurance activities effectively Support trial planning, coordination, and execution where required Provide technical support to internal and external stakeholders Contribute to continuous improvement and innovation within the engineering function Undertake additional responsibilities aligned with role seniority Requirements to become our Senior Simulation Engineer: BEng in Automotive, Mechanical, or Aerospace Engineering, or a BSc in a relevant Engineering discipline Strong knowledge of product, system, and component analysis for project delivery Experience using Abaqus/CAE or Abaqus for CATIA Good understanding of engineering materials and their properties in design and analysis Proficient in Microsoft Office (Word, Excel, PowerPoint, Outlook) Demonstrable problem-solving skills and analytical thinking Strong presentation and communication skills Technical Skills: Hand calculations Structural analysis (linear and non-linear) Dynamic, modal, and vibration analysis Thermal and thermal stress analysis Personal Attributes: Strong teamwork and collaboration skills Good interpersonal and communication abilities We value our employees, and in return, as our Senior Simulation Engineer, we offer: We offer a dynamic, international environment and an exciting opportunity to work with impactful projects together with a dedicated team. Attractive Benefits package (Pension, healthcare and many more benefits) Competitive Salary Continuous training, support and focus on your personal and professional development A truly diverse working environment where differences are embraced and a family- friendly culture is promoted. TECHNIA has a Diverse and inclusive environment. We are looking for qualified candidates irrespective of gender, gender identity, sexual orientation, ethnicity, race, religion, national origin, disability, or age. If the role sounds interesting and you have what it takes to be successful as our Senior Simulation Engineer , then click apply today - we would like to hear from you!
People Solutions Group Limited
Glasgow, Lanarkshire
Trainee Business Development & Technical Manager People Solutions are currently recruiting for an ambitious and energetic Trainee Business Development & Technical Manager to join our client based in Glasgow on a full-time, permanent basis. This is an excellent opportunity for someone with a technical sales background in manufacturing or merchandising who is eager to develop their career, gain hands-on experience, and progress within a growing business. This role would suit applicants who have previously worked as a Technician , Sales Executive , or Engineer . Shifts: • Monday - Friday: 9:00am - 5:00pm Salary: • £28,000 - £32,000 per annum Benefits: Your benefits as a Trainee Business Development & Technical Manager • Competitive salary package • Career development and progression opportunities • Ongoing training and personal development support • Exposure to both technical and commercial aspects of the business • Opportunity to work closely with senior leadership Day-to-day duties: As a Trainee Business Development & Technical Manager , your duties will include (but are not limited to): • Identifying and developing new business opportunities • Building and maintaining strong relationships with customers and suppliers • Engaging with existing clients to expand business opportunities • Supporting marketing, social media, and website campaigns • Conducting market analysis and assisting with strategic planning • Researching potential suppliers to improve cost competitiveness • Evaluating current sales efforts and partnerships to improve performance • Interpreting and creating basic technical drawings • Working with designers to ensure correct product specifications (e.g. gaskets and bolt grades) • Analysing enquiries, drawings, and material specifications • Providing technical support to promote product specification • Assisting in the development of sealing solutions and product innovations • Supporting problem-solving for technical sealing applications • Preparing and submitting accurate customer quotations • Participating in internal and external training initiatives Essential skills: To be successful as a Trainee Business Development & Technical Manager , you will need: • An HND qualification in an engineering-related discipline (essential) • Previous experience in technical sales within manufacturing and/or merchandising • Strong IT skills (Microsoft Outlook, Word, Excel, PowerPoint) • Basic knowledge of mechanical, chemical, and physics principles • Excellent organisational and time management skills • Strong analytical, logical, and problem-solving abilities • Ability to work independently and as part of a small team • High attention to detail with accurate record-keeping Desirable experience: • Experience with technical drawings and specifications • Knowledge of adhesives, tapes, or sealing solutions • Exposure to product development or technical support environments Training: Full training will be provided, with ongoing support to develop both technical and business development skills. Contact: If you are ready to take the next step in your career as a Trainee Business Development & Technical Manager , apply today or contact our recruitment team for more information People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process
May 15, 2026
Full time
Trainee Business Development & Technical Manager People Solutions are currently recruiting for an ambitious and energetic Trainee Business Development & Technical Manager to join our client based in Glasgow on a full-time, permanent basis. This is an excellent opportunity for someone with a technical sales background in manufacturing or merchandising who is eager to develop their career, gain hands-on experience, and progress within a growing business. This role would suit applicants who have previously worked as a Technician , Sales Executive , or Engineer . Shifts: • Monday - Friday: 9:00am - 5:00pm Salary: • £28,000 - £32,000 per annum Benefits: Your benefits as a Trainee Business Development & Technical Manager • Competitive salary package • Career development and progression opportunities • Ongoing training and personal development support • Exposure to both technical and commercial aspects of the business • Opportunity to work closely with senior leadership Day-to-day duties: As a Trainee Business Development & Technical Manager , your duties will include (but are not limited to): • Identifying and developing new business opportunities • Building and maintaining strong relationships with customers and suppliers • Engaging with existing clients to expand business opportunities • Supporting marketing, social media, and website campaigns • Conducting market analysis and assisting with strategic planning • Researching potential suppliers to improve cost competitiveness • Evaluating current sales efforts and partnerships to improve performance • Interpreting and creating basic technical drawings • Working with designers to ensure correct product specifications (e.g. gaskets and bolt grades) • Analysing enquiries, drawings, and material specifications • Providing technical support to promote product specification • Assisting in the development of sealing solutions and product innovations • Supporting problem-solving for technical sealing applications • Preparing and submitting accurate customer quotations • Participating in internal and external training initiatives Essential skills: To be successful as a Trainee Business Development & Technical Manager , you will need: • An HND qualification in an engineering-related discipline (essential) • Previous experience in technical sales within manufacturing and/or merchandising • Strong IT skills (Microsoft Outlook, Word, Excel, PowerPoint) • Basic knowledge of mechanical, chemical, and physics principles • Excellent organisational and time management skills • Strong analytical, logical, and problem-solving abilities • Ability to work independently and as part of a small team • High attention to detail with accurate record-keeping Desirable experience: • Experience with technical drawings and specifications • Knowledge of adhesives, tapes, or sealing solutions • Exposure to product development or technical support environments Training: Full training will be provided, with ongoing support to develop both technical and business development skills. Contact: If you are ready to take the next step in your career as a Trainee Business Development & Technical Manager , apply today or contact our recruitment team for more information People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process
Manufacturing Automation Engineer Location: Stockport Salary: 45,000 - 60,000 (DOE) An established engineering organisation with over a century of design and manufacturing excellence is looking to expand its team with a Manufacturing Automation Engineer . The company is recognised internationally for delivering high-quality engineering solutions to defence and industrial customers and continues to invest heavily in advanced manufacturing and innovation at its North West Centre of Excellence. About the Role This hands-on role will play a crucial part in implementing automation projects across welding and assembly operations. You'll take ownership of integrating new robotic systems, optimising processes, and driving continuous improvement initiatives across key production areas. Key Responsibilities Identify, specify, and implement new automation opportunities across welding and fabrication lines. Write technical specifications for capital equipment including robotic welding cells, CNC systems, and material handling. Manage installation, commissioning, and Site Acceptance Testing (SAT) of new robotic and automation systems. Develop and optimise robot programs and PLC logic to improve cycle times and process stability. Lead problem-solving and lean improvement activities across production teams. Drive FMEA, risk assessment, and process documentation for all automated systems. Support design-for-manufacture input on new product development projects. Ensure compliance with Health, Safety, Environmental and quality standards. About You You'll be a proactive engineer with practical experience implementing automation systems in a manufacturing environment. The ideal candidate will demonstrate: HND/Degree in Manufacturing, Mechanical, or Mechatronics Engineering. Strong knowledge of robotic programming and PLC control systems. Hands-on experience with automation projects (robotic welding, assembly, or machining). Understanding of lean manufacturing and continuous improvement methodologies. Excellent communication and problem-solving skills. Familiarity with relevant safety regulations (PUWER, CE/UKCA marking). Project management qualifications (PRINCE2, Agile, Six Sigma) advantageous. What's on Offer Competitive salary ( 45K- 60K DOE). Excellent pension scheme (up to 7% employer contribution). Half-day Fridays and flexible working culture. Life assurance and enhanced sick pay. Cycle-to-work scheme, free on-site parking and EV charge points. Long service rewards and additional holidays. Employee wellbeing initiatives including EAP support and free fruit weekly. This company is proud to support the Armed Forces Covenant , welcoming applications from service leavers, reservists, and veterans. If you're passionate about automation and want to make a real impact in a dynamic, forward-thinking engineering environment - we'd love to hear from you. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
May 15, 2026
Full time
Manufacturing Automation Engineer Location: Stockport Salary: 45,000 - 60,000 (DOE) An established engineering organisation with over a century of design and manufacturing excellence is looking to expand its team with a Manufacturing Automation Engineer . The company is recognised internationally for delivering high-quality engineering solutions to defence and industrial customers and continues to invest heavily in advanced manufacturing and innovation at its North West Centre of Excellence. About the Role This hands-on role will play a crucial part in implementing automation projects across welding and assembly operations. You'll take ownership of integrating new robotic systems, optimising processes, and driving continuous improvement initiatives across key production areas. Key Responsibilities Identify, specify, and implement new automation opportunities across welding and fabrication lines. Write technical specifications for capital equipment including robotic welding cells, CNC systems, and material handling. Manage installation, commissioning, and Site Acceptance Testing (SAT) of new robotic and automation systems. Develop and optimise robot programs and PLC logic to improve cycle times and process stability. Lead problem-solving and lean improvement activities across production teams. Drive FMEA, risk assessment, and process documentation for all automated systems. Support design-for-manufacture input on new product development projects. Ensure compliance with Health, Safety, Environmental and quality standards. About You You'll be a proactive engineer with practical experience implementing automation systems in a manufacturing environment. The ideal candidate will demonstrate: HND/Degree in Manufacturing, Mechanical, or Mechatronics Engineering. Strong knowledge of robotic programming and PLC control systems. Hands-on experience with automation projects (robotic welding, assembly, or machining). Understanding of lean manufacturing and continuous improvement methodologies. Excellent communication and problem-solving skills. Familiarity with relevant safety regulations (PUWER, CE/UKCA marking). Project management qualifications (PRINCE2, Agile, Six Sigma) advantageous. What's on Offer Competitive salary ( 45K- 60K DOE). Excellent pension scheme (up to 7% employer contribution). Half-day Fridays and flexible working culture. Life assurance and enhanced sick pay. Cycle-to-work scheme, free on-site parking and EV charge points. Long service rewards and additional holidays. Employee wellbeing initiatives including EAP support and free fruit weekly. This company is proud to support the Armed Forces Covenant , welcoming applications from service leavers, reservists, and veterans. If you're passionate about automation and want to make a real impact in a dynamic, forward-thinking engineering environment - we'd love to hear from you. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Are you an experienced Power Electronics Engineer with a strong background in control systems and mathematical modelling? Do you thrive on designing high-power systems and want to play a key role in advancing next-generation battery charging technology? We're working with a global engineering organisation that is expanding its R&D team in Glasgow. This is a fantastic opportunity to contribute to cutting-edge power electronics projects, developing innovative battery chargers and power converters used across a wide range of industrial applications-both indoor and outdoor-spanning 400W to 30kW. Location: Glasgow (Hybrid working available) The Role As part of a highly collaborative, multidisciplinary team, you will: Develop creative solutions for the rapidly growing automated material handling equipment market Work closely with software, hardware, and mechanical engineering teams Design, simulate, and optimise switching converters using tools such as Mathcad, Simplis, SPICE, and MATLAB/Simulink Take ownership of your work, manage priorities, and communicate progress effectively Contribute to advanced power electronics projects, with a focus on converter modelling and control What We're Looking For Proven experience designing power electronics topologies (Buck, Boost, LLC) Strong understanding of voltage/current sensing, scaling, and measurement techniques Familiarity with schematic capture tools Solid theoretical knowledge of magnetics Awareness of global EMC standards Experience with thermal design (convection, forced air, cold plate, or liquid cooling) Background in model-based development, auto-code generation, and deployment Expertise in power converter plant and controller modelling Hands-on experience with lab equipment (oscilloscopes, meters, dataloggers) Ability to work within structured, process-driven environments and contribute to technical documentation Why Apply? This is an excellent opportunity for a skilled engineer looking to make a tangible impact in green energy technology. You'll be working on innovative products at the forefront of power electronics, within a supportive and forward-thinking R&D environment. If you're ready to take the next step in your career and be part of something impactful, we'd love to hear from you. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
May 15, 2026
Full time
Are you an experienced Power Electronics Engineer with a strong background in control systems and mathematical modelling? Do you thrive on designing high-power systems and want to play a key role in advancing next-generation battery charging technology? We're working with a global engineering organisation that is expanding its R&D team in Glasgow. This is a fantastic opportunity to contribute to cutting-edge power electronics projects, developing innovative battery chargers and power converters used across a wide range of industrial applications-both indoor and outdoor-spanning 400W to 30kW. Location: Glasgow (Hybrid working available) The Role As part of a highly collaborative, multidisciplinary team, you will: Develop creative solutions for the rapidly growing automated material handling equipment market Work closely with software, hardware, and mechanical engineering teams Design, simulate, and optimise switching converters using tools such as Mathcad, Simplis, SPICE, and MATLAB/Simulink Take ownership of your work, manage priorities, and communicate progress effectively Contribute to advanced power electronics projects, with a focus on converter modelling and control What We're Looking For Proven experience designing power electronics topologies (Buck, Boost, LLC) Strong understanding of voltage/current sensing, scaling, and measurement techniques Familiarity with schematic capture tools Solid theoretical knowledge of magnetics Awareness of global EMC standards Experience with thermal design (convection, forced air, cold plate, or liquid cooling) Background in model-based development, auto-code generation, and deployment Expertise in power converter plant and controller modelling Hands-on experience with lab equipment (oscilloscopes, meters, dataloggers) Ability to work within structured, process-driven environments and contribute to technical documentation Why Apply? This is an excellent opportunity for a skilled engineer looking to make a tangible impact in green energy technology. You'll be working on innovative products at the forefront of power electronics, within a supportive and forward-thinking R&D environment. If you're ready to take the next step in your career and be part of something impactful, we'd love to hear from you. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Churches Fire & Security
Birmingham, Staffordshire
Junior Sprinkler Design Engineer Location: Birmingham / Cannock based (office) Salary: Competitive plus car allowance Job Type: Full-time, Permanent Churches Fire & Security Ltd is a highly recognised, industry leading Fire & Security business and is growing rapidly. Churches Fire & Security has a track record of providing fantastic opportunities to candidates throughout the Country. Due to our expanding team and client base, we are now seeking a Junior Mechanical design engineer in our mechanical sprinkler division. About the Role We are seeking a Junior Sprinkler Design Engineer / Trainee Designer to join our growing fire protection team. This is an excellent opportunity for someone with good CAD skills to develop a career in sprinkler system design. You will work alongside experienced engineers to produce compliant fire sprinkler designs for a range of commercial and residential projects. Key Responsibilities Assist in the design of automatic fire sprinkler systems (wet, dry, pre-action, etc.) Produce 2D CAD drawings using AutoCAD / Revit Support hydraulic calculations using specialist software Coordinate sprinkler layouts with other building services Attend design meetings and occasionally site visits Ensure designs comply with standards such as BS EN 12845 / BS 9251 Work with project teams to deliver designs on time and to specification Churches Fire and Security is keen to encourage applications from all areas of the community regardless of cultural background, ethnicity, gender identity, sexual orientation, sex or disability and we assess applications purely on the basis of skill. We recognise the advantages of our staff being themselves at work, and see the different views and experiences of people from varying backgrounds as a firm advantage. As an employer we view applications from service personnel or service leavers positively. We are proud signatories to the Armed Forces Covenant and there are many roles within our business which may be suitable for people with an MOD background.
May 15, 2026
Full time
Junior Sprinkler Design Engineer Location: Birmingham / Cannock based (office) Salary: Competitive plus car allowance Job Type: Full-time, Permanent Churches Fire & Security Ltd is a highly recognised, industry leading Fire & Security business and is growing rapidly. Churches Fire & Security has a track record of providing fantastic opportunities to candidates throughout the Country. Due to our expanding team and client base, we are now seeking a Junior Mechanical design engineer in our mechanical sprinkler division. About the Role We are seeking a Junior Sprinkler Design Engineer / Trainee Designer to join our growing fire protection team. This is an excellent opportunity for someone with good CAD skills to develop a career in sprinkler system design. You will work alongside experienced engineers to produce compliant fire sprinkler designs for a range of commercial and residential projects. Key Responsibilities Assist in the design of automatic fire sprinkler systems (wet, dry, pre-action, etc.) Produce 2D CAD drawings using AutoCAD / Revit Support hydraulic calculations using specialist software Coordinate sprinkler layouts with other building services Attend design meetings and occasionally site visits Ensure designs comply with standards such as BS EN 12845 / BS 9251 Work with project teams to deliver designs on time and to specification Churches Fire and Security is keen to encourage applications from all areas of the community regardless of cultural background, ethnicity, gender identity, sexual orientation, sex or disability and we assess applications purely on the basis of skill. We recognise the advantages of our staff being themselves at work, and see the different views and experiences of people from varying backgrounds as a firm advantage. As an employer we view applications from service personnel or service leavers positively. We are proud signatories to the Armed Forces Covenant and there are many roles within our business which may be suitable for people with an MOD background.
Right across infrastructure, there s a requirement to not only maintain, but also renew and reimagine. Whatever stage you re at in your career, with us you ll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, we re enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. This role will be within our Transmission & Renewables team. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity. You ll be working on National Grid contracts across South West England and South Wales, initially based on a project in Melksham for 6-9 months a full UK driving license is essential! Want to come and be a part of it? What will you be doing? As an M&E Supervisor, you ll manage multiple mechanical and electrical engineering disciplines, coordinating between key stakeholders to ensure KPIs and milestones are met. You ll be responsible for the supervision of site activities and assisting the site manager to ensure compliance with: Health, safety and environmental requirements. Quality procedures. Programme compliance. Site documentation procedures. Maintenance of site record. Management and productivity of direct employees, agency labour and subcontractor resources. Coordination of materials and equipment in accordance with M Group and National Grid s policies and procedures. Are you able to effectively manage and develop the site-based team to ensure standards are met? You ll assist in developing and implementing a proactive approach to the SHES plan, coordinate work activities with precise recording of materials and tools. You ll complete quality documentation, ensure daily inspections are carried out and assist with site inductions. Do you have previous experience working on National Grid projects? Sound like the role for you? We want to hear from you! What you ll bring SSSTS Site Supervisor qualification and minimum of CSCS / CPCS / ECITB Supervisor Safety Passport / Card Authorised as a National Grid Competent Person Ability to manage own workload, to work autonomously, with pace and attention to detail Strong communication and engagement skills, building and maintaining relationships with colleagues Problem solver, adapting solutions and anticipating complications Good computer literacy, with strong knowledge of Microsoft 365 Ability to develop and work within collaborative client relationships Drive and patience to undertake the challenge of learning the role, systems and processes Full UK driving license & willingness to travel What s in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000 s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose from Private health care and health care cash plan for you 25 days annual leave plus bank holidays Standby / Overtime / Call out Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3 rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.
May 15, 2026
Contractor
Right across infrastructure, there s a requirement to not only maintain, but also renew and reimagine. Whatever stage you re at in your career, with us you ll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, we re enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. This role will be within our Transmission & Renewables team. We design, build and commission substations at voltages up to and including 400kV. Our teams construct and maintain transmission lines and substations, ensuring the efficient and reliable delivery of electricity. You ll be working on National Grid contracts across South West England and South Wales, initially based on a project in Melksham for 6-9 months a full UK driving license is essential! Want to come and be a part of it? What will you be doing? As an M&E Supervisor, you ll manage multiple mechanical and electrical engineering disciplines, coordinating between key stakeholders to ensure KPIs and milestones are met. You ll be responsible for the supervision of site activities and assisting the site manager to ensure compliance with: Health, safety and environmental requirements. Quality procedures. Programme compliance. Site documentation procedures. Maintenance of site record. Management and productivity of direct employees, agency labour and subcontractor resources. Coordination of materials and equipment in accordance with M Group and National Grid s policies and procedures. Are you able to effectively manage and develop the site-based team to ensure standards are met? You ll assist in developing and implementing a proactive approach to the SHES plan, coordinate work activities with precise recording of materials and tools. You ll complete quality documentation, ensure daily inspections are carried out and assist with site inductions. Do you have previous experience working on National Grid projects? Sound like the role for you? We want to hear from you! What you ll bring SSSTS Site Supervisor qualification and minimum of CSCS / CPCS / ECITB Supervisor Safety Passport / Card Authorised as a National Grid Competent Person Ability to manage own workload, to work autonomously, with pace and attention to detail Strong communication and engagement skills, building and maintaining relationships with colleagues Problem solver, adapting solutions and anticipating complications Good computer literacy, with strong knowledge of Microsoft 365 Ability to develop and work within collaborative client relationships Drive and patience to undertake the challenge of learning the role, systems and processes Full UK driving license & willingness to travel What s in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000 s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose from Private health care and health care cash plan for you 25 days annual leave plus bank holidays Standby / Overtime / Call out Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3 rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.
Job Description Were looking for an experienced Design Manager (Mechanical) to lead a talented engineering team in a dynamic manufacturing environment based in Derby! Were seeking candidates with experience managing mechanical design teams in machinery manufacturing, capital equipment, automation, or special-purpose machinery click apply for full job details
May 15, 2026
Full time
Job Description Were looking for an experienced Design Manager (Mechanical) to lead a talented engineering team in a dynamic manufacturing environment based in Derby! Were seeking candidates with experience managing mechanical design teams in machinery manufacturing, capital equipment, automation, or special-purpose machinery click apply for full job details
Location; UK field based - head office Walsall We are working with a specialist engineering business supplying industrial washing and hygiene systems into food manufacturing, pharmaceutical and industrial processing environments across the UK. The business designs, installs and maintains bespoke washing systems, supporting customers where uptime, reliability and service response are critical. Due to continued growth, the business is looking to recruit a Field Service Mechanical Engineer to join a small, experienced engineering team. This is a field-based role working on customer sites across the UK, supporting planned maintenance, breakdown response, installation work and ongoing equipment reliability. You will be working on industrial washers, conveyor systems, spray bars, air knives, bin lifts and utensil washing equipment. The role combines hands-on mechanical maintenance with customer-facing service work, offering good variety and strong long-term stability. This role would suit a mechanically biased Maintenance Engineer or Mechanical Fitter who enjoys field-based problem solving, travel, varied site work and working with specialist industrial equipment. Electrical experience is useful, but the business is happy to provide training where needed. Responsibilities of a field service mechanical engineer: Carry out planned maintenance, repairs and first-line fault finding on industrial washing systems Replace worn or damaged components to maintain safe and reliable equipment performance Work on industrial conveyor systems, spray bars, air knives, bin lifts and utensil washers Support installations, commissioning and planned service work on customer sites across the UK Carry out TIG welding where required as part of repair and modification work Work independently on service visits or as part of a team on larger installations Maintain high standards of health, safety and customer service while working on site Complete service reports and communicate clearly with customers and internal teams Skills & qualifications of a field service mechanical engineer: Strong mechanical maintenance background within industrial, manufacturing or service environments Mechanical or maintenance qualifications beneficial but not essential TIG welding experience essential Experience working on conveyors, production equipment or industrial plant desirable Electrical fault-finding experience advantageous but not essential Ability to work independently and manage field-based workloads Good communication skills and customer-facing attitude Full UK driving licence required Benefits of a field service mechanical engineer: Salary: £33,000 £37,000 (with review based on experience) Monday to Thursday: 07 00 Friday: 07 00 Overtime paid at 1.5x UK-wide field-based role with varied customer sites and equipment Stop-out allowance including hotel accommodation plus meal allowance / £20 per night Pension scheme Training and development in electrical systems and specialist machinery Long-term stable role within a growing specialist engineering business If you feel this Field Service Mechanical Engineer role is right for you, please contact Dan Fergus at Maintech Recruitment for more information or click apply. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed in line with our privacy policy, available on our website. Top of Form Bottom of Form
May 15, 2026
Full time
Location; UK field based - head office Walsall We are working with a specialist engineering business supplying industrial washing and hygiene systems into food manufacturing, pharmaceutical and industrial processing environments across the UK. The business designs, installs and maintains bespoke washing systems, supporting customers where uptime, reliability and service response are critical. Due to continued growth, the business is looking to recruit a Field Service Mechanical Engineer to join a small, experienced engineering team. This is a field-based role working on customer sites across the UK, supporting planned maintenance, breakdown response, installation work and ongoing equipment reliability. You will be working on industrial washers, conveyor systems, spray bars, air knives, bin lifts and utensil washing equipment. The role combines hands-on mechanical maintenance with customer-facing service work, offering good variety and strong long-term stability. This role would suit a mechanically biased Maintenance Engineer or Mechanical Fitter who enjoys field-based problem solving, travel, varied site work and working with specialist industrial equipment. Electrical experience is useful, but the business is happy to provide training where needed. Responsibilities of a field service mechanical engineer: Carry out planned maintenance, repairs and first-line fault finding on industrial washing systems Replace worn or damaged components to maintain safe and reliable equipment performance Work on industrial conveyor systems, spray bars, air knives, bin lifts and utensil washers Support installations, commissioning and planned service work on customer sites across the UK Carry out TIG welding where required as part of repair and modification work Work independently on service visits or as part of a team on larger installations Maintain high standards of health, safety and customer service while working on site Complete service reports and communicate clearly with customers and internal teams Skills & qualifications of a field service mechanical engineer: Strong mechanical maintenance background within industrial, manufacturing or service environments Mechanical or maintenance qualifications beneficial but not essential TIG welding experience essential Experience working on conveyors, production equipment or industrial plant desirable Electrical fault-finding experience advantageous but not essential Ability to work independently and manage field-based workloads Good communication skills and customer-facing attitude Full UK driving licence required Benefits of a field service mechanical engineer: Salary: £33,000 £37,000 (with review based on experience) Monday to Thursday: 07 00 Friday: 07 00 Overtime paid at 1.5x UK-wide field-based role with varied customer sites and equipment Stop-out allowance including hotel accommodation plus meal allowance / £20 per night Pension scheme Training and development in electrical systems and specialist machinery Long-term stable role within a growing specialist engineering business If you feel this Field Service Mechanical Engineer role is right for you, please contact Dan Fergus at Maintech Recruitment for more information or click apply. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed in line with our privacy policy, available on our website. Top of Form Bottom of Form
A leading engineering organisation is seeking a talented Electronic Systems Engineer to play a key role in the design and integration of complex electronic systems. This is an excellent opportunity to work on advanced, high-integrity engineering projects within a collaborative and innovative environment. They work on a Hybrid basis, with 2-3 days per week onsite, at either their Stevenage, Bristol or Bolton offices. The Role As an Electronic Systems Engineer, you will take ownership of system-level design and integration, translating high-level requirements into robust, fully integrated hardware solutions. You'll be responsible for defining system architectures, breaking down complex equipment into subsystems, and ensuring seamless connectivity across interfaces. Key Responsibilities: Lead system-level electronic design from concept through to deployment Define system architectures, interfaces, and interconnects Produce high-quality technical documentation, including: System schematics Wiring diagrams Interface control documentation Block diagrams Collaborate with cross-functional teams (mechanical, software, firmware, manufacturing) Support system integration, validation, and acceptance testing Conduct root cause analysis and resolve system-level issues Ensure compliance with relevant safety, EMC, and regulatory standards About You We're looking for a systems-oriented engineer who thrives in complex environments and enjoys solving challenging integration problems. Essential: Degree-qualified in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define system architectures and equipment breakdowns Solid understanding of analogue and digital electronics Experience producing technical documentation and system diagrams Strong analytical, problem-solving, and communication skills Familiarity with systems design tools (e.g. DOORS, Rhapsody, MATLAB/Simulink) Desirable: Experience with power distribution and grounding strategies Knowledge of communication protocols (e.g. CAN, Ethernet, SPI, I C, UART) Understanding of EMC/EMI mitigation Background in regulated industries such as aerospace, defence, automotive, rail, or medical Experience with SPICE simulation tools What's on Offer Competitive salary ( 52,500 - 57,000 depending on experience) Annual performance bonus Generous pension scheme (up to 14% combined contributions) Paid overtime opportunities Flexible working arrangements Additional annual leave options (including flexi leave) Enhanced parental leave benefits On-site facilities including subsidised meals and free parking Healthcare cash plan Additional Information Due to the nature of the work, applicants must be eligible to obtain security clearance. This typically requires British citizenship or dual nationality including British citizenship, along with the ability to pass standard background checks. Apply Now If you're an experienced Electronic Systems Engineer looking to work on technically challenging projects with real-world impact, we'd love to hear from you. Apply today or contact us confidentially for more information.
May 15, 2026
Full time
A leading engineering organisation is seeking a talented Electronic Systems Engineer to play a key role in the design and integration of complex electronic systems. This is an excellent opportunity to work on advanced, high-integrity engineering projects within a collaborative and innovative environment. They work on a Hybrid basis, with 2-3 days per week onsite, at either their Stevenage, Bristol or Bolton offices. The Role As an Electronic Systems Engineer, you will take ownership of system-level design and integration, translating high-level requirements into robust, fully integrated hardware solutions. You'll be responsible for defining system architectures, breaking down complex equipment into subsystems, and ensuring seamless connectivity across interfaces. Key Responsibilities: Lead system-level electronic design from concept through to deployment Define system architectures, interfaces, and interconnects Produce high-quality technical documentation, including: System schematics Wiring diagrams Interface control documentation Block diagrams Collaborate with cross-functional teams (mechanical, software, firmware, manufacturing) Support system integration, validation, and acceptance testing Conduct root cause analysis and resolve system-level issues Ensure compliance with relevant safety, EMC, and regulatory standards About You We're looking for a systems-oriented engineer who thrives in complex environments and enjoys solving challenging integration problems. Essential: Degree-qualified in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define system architectures and equipment breakdowns Solid understanding of analogue and digital electronics Experience producing technical documentation and system diagrams Strong analytical, problem-solving, and communication skills Familiarity with systems design tools (e.g. DOORS, Rhapsody, MATLAB/Simulink) Desirable: Experience with power distribution and grounding strategies Knowledge of communication protocols (e.g. CAN, Ethernet, SPI, I C, UART) Understanding of EMC/EMI mitigation Background in regulated industries such as aerospace, defence, automotive, rail, or medical Experience with SPICE simulation tools What's on Offer Competitive salary ( 52,500 - 57,000 depending on experience) Annual performance bonus Generous pension scheme (up to 14% combined contributions) Paid overtime opportunities Flexible working arrangements Additional annual leave options (including flexi leave) Enhanced parental leave benefits On-site facilities including subsidised meals and free parking Healthcare cash plan Additional Information Due to the nature of the work, applicants must be eligible to obtain security clearance. This typically requires British citizenship or dual nationality including British citizenship, along with the ability to pass standard background checks. Apply Now If you're an experienced Electronic Systems Engineer looking to work on technically challenging projects with real-world impact, we'd love to hear from you. Apply today or contact us confidentially for more information.
Alexander Mann Solutions - Contingency
City, Derby
AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Senior Project Engineer - Manufacturing for a 12 month contract based in Derby . This role is a hybrid position in which you will be based in our client Derby facility Tues-Thurs each week and working from home Monday and Friday. Some occasional travel within the UK and Europe to support test activities will be required. Purpose of the role: Lead the end-to-end delivery of multiple bespoke test rig projects, ensuring high-quality outcomes that meet customer requirements Act as the key interface between customers, engineering teams, and suppliers to translate technical needs into structured delivery plans Coordinate complex, multi-stakeholder activities to deliver certification-ready test solutions within defined timelines and standards What you'll do: Manage test rig projects from concept through to certification Engage with customers to define requirements and agree delivery plans Work closely with design engineers to develop testing solutions Coordinate test setup, including software, hardware, and location Manage suppliers and supply chain for externally built rigs and components Apply structured delivery processes and track progress using planning tools Analyse and communicate project data and updates to stakeholders Deliver final test results and certification documentation The skills you'll need: Experience in project engineering or project management within an engineering environment Strong mechanical engineering understanding Proven ability to manage multiple projects end-to-end Excellent stakeholder and supplier management skills Experience using planning tools (e.g. MS Project, P6, Oracle) Experienced in verification and validation exercises Ability to interpret technical requirements and communicate clearly Strong analytical and reporting skills Next steps We will only accept workers operating via an Umbrella engagement model. If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business
May 15, 2026
Contractor
AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Senior Project Engineer - Manufacturing for a 12 month contract based in Derby . This role is a hybrid position in which you will be based in our client Derby facility Tues-Thurs each week and working from home Monday and Friday. Some occasional travel within the UK and Europe to support test activities will be required. Purpose of the role: Lead the end-to-end delivery of multiple bespoke test rig projects, ensuring high-quality outcomes that meet customer requirements Act as the key interface between customers, engineering teams, and suppliers to translate technical needs into structured delivery plans Coordinate complex, multi-stakeholder activities to deliver certification-ready test solutions within defined timelines and standards What you'll do: Manage test rig projects from concept through to certification Engage with customers to define requirements and agree delivery plans Work closely with design engineers to develop testing solutions Coordinate test setup, including software, hardware, and location Manage suppliers and supply chain for externally built rigs and components Apply structured delivery processes and track progress using planning tools Analyse and communicate project data and updates to stakeholders Deliver final test results and certification documentation The skills you'll need: Experience in project engineering or project management within an engineering environment Strong mechanical engineering understanding Proven ability to manage multiple projects end-to-end Excellent stakeholder and supplier management skills Experience using planning tools (e.g. MS Project, P6, Oracle) Experienced in verification and validation exercises Ability to interpret technical requirements and communicate clearly Strong analytical and reporting skills Next steps We will only accept workers operating via an Umbrella engagement model. If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
May 15, 2026
Full time
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
The Redline Group have an exciting opportunity for a Contract Mechanical Design Engineer to work with our customer and play a key role in the design and development of complex engineered products. Working as part of a multidisciplinary engineering team, you will take ownership of mechanical design activities from concept through to detailed design and support during development and validation. This role will be based onsite in Leicester and is offered on an initial 6 month contract. This role has an indicative INSIDE IR35 determination therefore candidates will be required to operate via an Umbrella company. The business is a well established and technically innovative engineering organisation operating within a high reliability product environment. Due to continued project demand and an active development pipeline, they are seeking an experienced contractor who can hit the ground running and deliver high quality mechanical design work. This is an excellent opportunity for a hands on Mechanical Design Engineer to contribute to meaningful engineering projects within a fast paced development environment. Key Skills Required - Contract Mechanical Design Engineer - Leicester - Strong experience using SolidWorks, including PDM - Experience using ERP systems for change management - Design of mechanical components and assemblies - Understanding of engineering change processes and documentation - Ability to work effectively within a structured development environment For more information or to apply for the Contract Mechanical Design Engineer role based in Leicester, please contact Lewis Hay - (url removed) or (phone number removed) quoting reference LNH1000
May 15, 2026
Contractor
The Redline Group have an exciting opportunity for a Contract Mechanical Design Engineer to work with our customer and play a key role in the design and development of complex engineered products. Working as part of a multidisciplinary engineering team, you will take ownership of mechanical design activities from concept through to detailed design and support during development and validation. This role will be based onsite in Leicester and is offered on an initial 6 month contract. This role has an indicative INSIDE IR35 determination therefore candidates will be required to operate via an Umbrella company. The business is a well established and technically innovative engineering organisation operating within a high reliability product environment. Due to continued project demand and an active development pipeline, they are seeking an experienced contractor who can hit the ground running and deliver high quality mechanical design work. This is an excellent opportunity for a hands on Mechanical Design Engineer to contribute to meaningful engineering projects within a fast paced development environment. Key Skills Required - Contract Mechanical Design Engineer - Leicester - Strong experience using SolidWorks, including PDM - Experience using ERP systems for change management - Design of mechanical components and assemblies - Understanding of engineering change processes and documentation - Ability to work effectively within a structured development environment For more information or to apply for the Contract Mechanical Design Engineer role based in Leicester, please contact Lewis Hay - (url removed) or (phone number removed) quoting reference LNH1000
The Power Systems Engineer will take ownership of energy architecture, ensuring consistent performance across a diverse range of applications, from portable systems to fully autonomous platforms. Working closely with multidisciplinary teams, you will lead the design, integration and validation of battery and power systems, ensuring reliability, efficiency and performance under demanding real world conditions. The Power Systems Engineer will be responsible for: Designing and developing energy systems to support integration across a range of hardware platforms. Acting as the technical lead for power requirements across electrical, mechanical and systems interfaces. Ensuring stable and uninterrupted power delivery to embedded systems, sensors and autonomous subsystems. Developing and implementing thermal management strategies for battery and power systems. Testing and validating power systems within lab environments and real world field conditions. Supporting compliance and safety testing in line with relevant standards (e.g. UL, IEC, CE) The Power Systems Engineer will have: At least 3 years hands on experience working with battery and power systems in real world applications. Strong understanding of battery chemistries, particularly within low temperature or demanding environments. A degree in Electrical Engineering or a related discipline. Experience with battery management systems, thermal control and system integration. Practical experience in prototyping, testing and hardware development (e.g. PCB design, soldering) The ability to manage technical delivery from concept through to deployment. This role is well suited to an engineer who thrives on solving complex power challenges and delivering systems that perform in demanding environments. If that sounds like your kind of challenge, apply with your CV to learn more.
May 15, 2026
Full time
The Power Systems Engineer will take ownership of energy architecture, ensuring consistent performance across a diverse range of applications, from portable systems to fully autonomous platforms. Working closely with multidisciplinary teams, you will lead the design, integration and validation of battery and power systems, ensuring reliability, efficiency and performance under demanding real world conditions. The Power Systems Engineer will be responsible for: Designing and developing energy systems to support integration across a range of hardware platforms. Acting as the technical lead for power requirements across electrical, mechanical and systems interfaces. Ensuring stable and uninterrupted power delivery to embedded systems, sensors and autonomous subsystems. Developing and implementing thermal management strategies for battery and power systems. Testing and validating power systems within lab environments and real world field conditions. Supporting compliance and safety testing in line with relevant standards (e.g. UL, IEC, CE) The Power Systems Engineer will have: At least 3 years hands on experience working with battery and power systems in real world applications. Strong understanding of battery chemistries, particularly within low temperature or demanding environments. A degree in Electrical Engineering or a related discipline. Experience with battery management systems, thermal control and system integration. Practical experience in prototyping, testing and hardware development (e.g. PCB design, soldering) The ability to manage technical delivery from concept through to deployment. This role is well suited to an engineer who thrives on solving complex power challenges and delivering systems that perform in demanding environments. If that sounds like your kind of challenge, apply with your CV to learn more.
Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Do you have experience with SysML or Rhapsody? Do you have hands-on experience with DOORS and DOORS NG? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Systems V&V Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: Test Strategy & Development: Defining test requirements, creating test plans, scoping frontend activities with the customer ensuring that requirements are met and understood System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards Influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects Supporting new product bid activities Identify, document, and deploy best practice across the department and within projects Your skillset may include: Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators) Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody Experience in DfT and testability RF / Microwave systems knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 15, 2026
Contractor
Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Do you have experience with SysML or Rhapsody? Do you have hands-on experience with DOORS and DOORS NG? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Systems V&V Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: Test Strategy & Development: Defining test requirements, creating test plans, scoping frontend activities with the customer ensuring that requirements are met and understood System Validation: Overseeing or supporting the qualification and acceptance of test equipment, ensuring it is robust, compliant, and accurate Analysis & Troubleshooting: Analysing test data, identifying performance bottlenecks, and troubleshooting validation issues Documentation & Governance: Producing technical documentation (test procedures, reports) and ensuring compliance with safety and regulatory standards Influence senior stakeholders within the business relating to technical direction Provide technical leadership to all Test related issues across design projects Supporting new product bid activities Identify, document, and deploy best practice across the department and within projects Your skillset may include: Technical Knowledge: Strong understanding of electronics or mechanical systems, a degree in Electrical Engineering or a similar discipline Hands-on Experience: Expertise in operating general-purpose test equipment (e.g., oscilloscopes, spectrum analyzers, signal generators) Industry Standards: Knowledge of safety-critical standards, particularly within aerospace, defence (e.g., MOD), or rail sectors Communication: Ability to work within multi-disciplinary teams and liaise with customers for system acceptance Hands-on experience of DOORS & DOORS NG, SysML & Rhapsody Experience in DfT and testability RF / Microwave systems knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Systems V&V Engineer 12 month contract Can be based in Stevenage or Bristol Offering up to 85ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
May 15, 2026
Full time
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
An established engineering firm in the Greater Belfast Area is seeking a Mechanical Design Engineer to manage projects from initial sketches to completion. The role requires at least 3 years of Mechanical Design experience and proficiency in Solidworks or similar 3D packages. Strong team working and communication skills are essential. This full-time permanent position offers a salary range of £38-48K plus benefits and requires the ability to work in a collaborative team environment.
May 15, 2026
Full time
An established engineering firm in the Greater Belfast Area is seeking a Mechanical Design Engineer to manage projects from initial sketches to completion. The role requires at least 3 years of Mechanical Design experience and proficiency in Solidworks or similar 3D packages. Strong team working and communication skills are essential. This full-time permanent position offers a salary range of £38-48K plus benefits and requires the ability to work in a collaborative team environment.
