1474 jobs found

What Are We Looking For? Our Asset Operations and Maintenance Team is looking to recruit a Health & Safety Manager to join on a permanent basis, working from Muir of Ord. Your role will involve ensuring that all RSE companies activities are carried out in accordance with all relevant Health and Safety legislation and that all persons affected either directly or indirectly are not subjected to avoidable risks. Please note owing to the nature of this role, and location of works, this position will require travel across Scotland. Some of Your Key Duties Include: Ensure that all activities are carried out in compliance with RSE s Health and Safety, Quality and Environmental management systems Ensure that where appropriate, all requirements under the current CDM regulations are satisfied Including assisting project teams in compiling Construction Phase Plans Provide assistance on all matters related to QHSE issues to departments and individuals within the Ross-shire engineering group of companies as and when required under the day-to-day direction of the Health & Safety Manager Carry out QHSE inspections and/or audits both at the RSE companies premises, and construction sites, as directed by the Health & Safety Manager to ensure that all activities are carried out in a safe manner and that persons are not placed in a hazardous environment Complete relevant QHSE inspection and/or audit reports highlighting any issues/nonconformance and issue the report to the relevant Project Engineer/Project Manager/Site Manager and to the QHSE Managers and the Company Directors Assist and advise Engineers/Site Managers as appropriate with the preparation of Health & Safety risk assessments and matters of safe working and compliance as required Produce COSHH assessments as required Communicate and liaise fully with all departments within the business What Do You Need? NEBOSH general (Level 3) essential (or working towards) Practical understanding and approach to managing QHSE, with a focus on building relationships with delivery teams Excellent communication skills, both written and verbal Sound knowledge of Health & Safety legislation Experience in the application of Health & Safety practices in both manufacturing and construction sites. Utilities experience highly advantageous. Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. Private Healthcare (Personal) Car allowance or company van A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now

Job Title: NPI Project Manager Location: Plymouth, Devon Salary: £50,000.00 - £52,000.00 plus bonus Contract Type: Permanent This is a full-time position, Monday Friday, 39 hours per week. Our client believes in driving innovation and excellence. There clients include some of the world s leading technology companies major players in software, hardware, and cloud computing. And specialises in enclosures, climate control systems, power distribution, and IT infrastructure for industrial and IT applications. The Opportunity We are seeking a proactive and results-driven NPI Project Manager to drive the successful introduction of new products from concept through to launch. In this pivotal role, you will manage timelines, budgets, resources, and risks, ensuring every project aligns with customer and business objectives. You ll be the crucial link between product development and our complex manufacturing environment. Key Accountabilities Lead cross-functional teams (engineering, manufacturing, supply chain, quality, sales, etc.) to deliver new products on time, within scope and budget. Develop and maintain detailed project plans, timelines, and resource allocations for all NPI activities. Drive project governance through phase-gate reviews, risk assessments, and issue resolution. Collaborate with customers, design, operations, and commercial teams to define project requirements and deliverables. Coordinate prototype builds, testing, validation, and pilot production. Track and report on project performance using KPIs and dashboards for stakeholders and senior leadership. Manage changes to project scope, schedule, and costs using robust change control processes. Ensure compliance with internal processes, industry standards, and regulatory requirements. Support transfer to production and product launch readiness, including documentation, training, and supply chain ramp-up. Key Performance Indicators Time: On-time delivery to customer expectations, aligned with internal stakeholders. Cost: Effective budget management, delivering cost-effective solutions for both company and customer. Quality: Meeting internal and customer-driven quality standards. Relationships You will build and maintain strong relationships with both internal and external stakeholders, including engineering, manufacturing, supply chain, quality, sales, customers, and suppliers. Qualifications & Experience We welcome candidates from all backgrounds. To succeed, you ll bring: Bachelor s degree in Engineering, Business Management, Project Management, or a related field. PMQ or equivalent project management certification preferred. Substantial project management experience, ideally within a manufacturing environment. Strong understanding of product development lifecycles. Proficiency in project management tools and NPI processes. SAP experience is advantageous. Excellent leadership, communication, and organisational skills. Strong problem-solving abilities and attention to detail. Ability to manage multiple priorities and stakeholders in a fast-paced environment. What We Value Teamwork: Collaborating effectively across diverse teams. Training: Commitment to continuous learning and development. Communication: Clear and confident communication at all levels. Recognition: Respect for diverse perspectives and contributions. What s in it for you? Opportunity to make a real impact Room for innovation and creativity Career growth and development Collaborative, supportive environment Recognition and rewards Rewards Package We re offering a salary of £50,000 - £52,000 plus bonus based on your qualifications and experience 33 days annual leave (including bank holidays) plus holiday purchasing scheme Life insurance 3 x your salary Pension contributions matched to 5% Access to our Westfield Health provision Access to our Smart Spending platform If interested, APPLY NOW! Alternatively, please send a copy of your CV to (url removed)

Senior Product Manager Location: Stevenage Salary: 65,000 - 75,000 + Bonus + Package Are you a Senior Product Manager with experience in engineered or manufactured products, looking to take ownership of product strategy within a global engineering business? This is an opportunity to join a Global Engineering & Manufacturing company at their UK Engineering & Manufacturing HQ near Stevenage. The Engineering & Manufacturing Company designs, manufactures & assembles physical, engineered and assembled products, so this Senior Product Manager role requires experience in tangible product environments rather than digital, software, AI or service-led businesses. The Senior Product Manager Role As a Senior Product Manager, you will take ownership of a key product portfolio, defining strategy, driving roadmaps, and leading new product development activity to deliver growth and performance. You will operate across the full product lifecycle, working closely with engineering, operations, supply chain, and commercial teams, using data and market insight to shape direction and drive results. Key Responsibilities of the Senior Product Manager Develop and deliver long-term product strategies and multi-year roadmaps Lead new product development initiatives, ensuring delivery on time and aligned to business goals Take ownership of product performance including revenue, margin, and market positioning Analyse product and market data to identify trends, opportunities, and risks Work cross-functionally to ensure products are delivered efficiently and to target Identify opportunities for growth across products, markets, and regions Support forecasting, planning, and investment decisions across the portfolio Engage with customers and stakeholders to understand requirements and inform strategy Requirements for the Senior Product Manager Role Degree educated in Engineering, Business, or a related discipline Proven experience in a senior or strategic Product Management role Background working with physical engineered, manufactured or assembled products Strong commercial awareness with experience managing product performance Advanced Microsoft Excel skills, with the ability to analyse complex datasets and forecasts Experience leading or supporting new product development within a manufacturing environment Ability to influence and drive outcomes across cross-functional teams Experience within engineering, manufacturing, or industrial sectors is essential What's On Offer Salary 65,000 - 75,000 Pension & Bonus scheme 25 days holiday plus bank holidays Senior-level role with real autonomy and strategic influence Opportunity to shape product direction within a global engineering business Location - Stevenage and commutable from Hitchin, Luton, Welwyn Garden City, Hatfield, Bedford and surrounding areas Apply Now - This is a fantastic opportunity for an experienced Product Manager to step into a senior role where you can take ownership of strategy, lead product direction, and drive real commercial impact within a global manufacturing organisation. Product Manager, Senior Product Manager, Product Management, Engineering, Manufacturing, Mechanical Engineering, Engineered Products, Manufactured Products, Assembled Products, Industrial Products, New Product Development (NPD), Product Lifecycle Management, Product Strategy, Commercial Management, Pricing Strategy, Margin Management, P&L Management, Demand Forecasting, Forecasting, Data Analysis, Business Analysis, Advanced Microsoft Excel, Excel Modelling, Pivot Tables, Data Interpretation, Sales Inventory Operations Planning (SIOP), S&OP, Inventory Management, Supply Chain Collaboration, ERP Systems, MRP, Market Analysis, Competitor Analysis, Voice of Customer (VOC), Stakeholder Management, Cross-Functional Leadership, Continuous Improvement, Process Improvement, Business Planning, Growth Strategy To find out more about Progressive please visit (url removed) Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales

More About The Role As a People Administrator / Assistant, you will play a vital role in supporting the day-to-day operations of our human resources department. You will be responsible for a wide range of HR administrative tasks, ensuring smooth and efficient HR processes, and providing excellent customer service to our employees. This is an exciting opportunity for someone who is passionate about HR and wants to contribute to the success of a growing organisation. Reporting to the People Advisor, you will: Be the first point of contact for foundation level site People queries Offer HR Expertise to site colleagues and managers as necessary Provide administrative support to the HR team Ensure payroll administration is accurate and all colleagues get paid correctly and on time Maintain records, files and spreadsheets in line with data protection legislation Keep ad-hoc analysis and reporting on HR issues up to date Coordinate weekly HR audit checks Support the recruitment process for the site as required Become a subject matter expert on company HR policies, ensuring the site remains fully compliant at all times. Support, coach and challenge line management with absence, disciplinary and grievance issues Develop engaging, proactive communications across the site Build positive and effective relationships with unions, agency suppliers, colleagues and stakeholders Support and drive colleague engagement on site About You The good news is you don't need to be fully HR qualified to apply for this role (although we'd love for you to be working towards one). But we do look for: The ability to work in a fast paced People environment (manufacturing experience would be good, but isn t essential) A proactive, positive approach to work with a true customer focus The ability to work under pressure to tight deadlines Exposure to HR Systems Excellent all-round IT skills (especially Microsoft Excel) Experience of advising and supporting colleagues and managers with foundation level people queries An understanding of HR policies and practices Proactive approach to own continuous development Experience of implementing processes The ability to act on own initiative In return for your hard work we will offer you: Six weeks holiday (including bank holidays) and a guaranteed day off that's important to you - whether that be a birthday, religious holiday or a special occasion 15% discount in our supermarkets and convenience stores available from the day you join us Additional 10% discount card for a Friend or Family member Career progression and development opportunities Subsidised staff canteen Competitive pension and life assurance Healthcare/Well-being benefits including Aviva Digital GP Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more Optional Payroll charity donations A range of family friendly policies including 26 weeks maternity and adoption leave along with neonatal and fertility leave About The Company You ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We re British farming s biggest single direct customer. We buy from highly valued suppliers. And we re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website.

A super exciting role has become available for a well-known business across the UK. This company is going from strength to strength & positions itself as a leader in their industry. As Payroll Manager, you will be responsible for a monthly and weekly payroll & a medium sized payroll team. The Payroll Manager will be responsible for: Managing a monthly and weekly payroll from start to finish Overseeing all statutory deductions, including SMP, SPP, SSP, NI, PAYE HMRC submissions All year end processes Stepping in and resolving any escalated queries Managing the payroll team- carrying out one to ones, appraisals, training plans etc Supporting with any project related work Stakeholder management To be considered for this role, candidates need to be an experienced Payroll Manager with can demonstrate previous staff management and comfortable dealing with a monthly and weekly payroll. A superb benefits package is available with this role, including pension, life assurance and a variety of different discounts. Interviews are underway now - please apply for immediate consideration. 51652GCR4 INDPAY The Portfolio Group are acting on behalf of our client in recruiting for this position.

Technical Manager High Performance Computing An exciting opportunity is available for an experienced Technical Manager - High Performance Computing to support the development and delivery of next-generation BEV and PHEV electrical/electronic architectures. This senior technical leadership role will focus on the delivery and integration of HCP4 systems, ensuring projects are delivered to timing, quality, and cost targets. The successful candidate will work cross-functionally across Engineering, Manufacturing, Quality, Suppliers, and wider Group stakeholders to support future vehicle technologies and electrical architectures. Key Responsibilities Technical ownership of HCP4 systems and related vehicle functions Delivery of software, hardware, and system integration activities Management of project timing, KPIs, budgets, and technical deliverables Cross-functional collaboration and supplier management Support technical roadmap development and future concept activities Lead issue resolution and continuous improvement initiatives Essential Experience Experience within the automotive industry delivering ECU-based systems Strong knowledge of Body Electronics and vehicle electrical architectures Understanding of systems engineering and product development processes Excellent communication and stakeholder management skills Experience working with suppliers and cross-functional engineering teams Degree-qualified in Engineering or equivalent Desirable Experience Chartered Engineer status German language skills This is an excellent opportunity to work on advanced automotive technologies within a highly innovative engineering environment. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Sales Manager - Strategic New Business Office-Based I'm seeking a dynamic Sales Manager to help shape the future of a growing electronics manufacturing business - this is not your typical high-volume BDM role. The role will be focused on building a handful of meaningful, high-value partnerships each year, not chasing endless small leads. This is a varied, hands-on role combining: - Strategic new business development - Ownership of selected existing accounts - Customer onboarding & relationship growth - Close collaboration with senior leadership For the right person, this role will grow into a key leadership position - becoming a trusted right-hand to senior management and potentially leading a team in the future. Who I'm looking for: Energetic, proactive relationship-builders Strong sales instincts + passion for customer service Ambitious individuals who want to grow into leadership Electronics Industry experience I'm open to both: - High-potential junior candidates ready to develop - Experienced sales professionals wanting a more strategic role WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.

Technical Services Manager Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contribution, Life insurance up to 4x salary Location: Bourne, Lincolnshire Ways of Working: Site based Hours of work: Monday-Friday, 08.30-17.00 Contract Type: 12-Month Fixed Term Contract (Maternity Cover) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. This role is based in Bourne at a site specialising in the preparation of fruit, leafy and dressed salads, noodles, and stir-fry mixes. The site employs over 1,300 people and is conveniently located just 16 miles from Peterborough and 12 miles from Spalding. What you'll be doing The Technical Services Manager is responsible for overseeing the quality and food safety management systems across the site, ensuring full compliance with legal, customer, and industry standards. This includes ownership and continuous improvement of the Quality Management System (QMS), incorporating HACCP, TACCP, VACCP, allergen management, audit and compliance activities, customer, and product standards, and change control. The role also provides leadership to the Technical Services team, supporting the delivery of a quality-focused culture while ensuring effective management of complaints, coordination of KPI reporting, and maintenance of factory systems (e.g. Redzone, Olympus, and corrective action databases). In addition, the role oversees pest control, traceability systems, and cross-functional collaboration to support the consistent delivery of safe, compliant, and high-quality products, enabling the operational teams to maintain high standards. (The role covers the main site at Spalding Road and the smaller Bourne Growing Unit where beansprouts are grown one of our USP's at Bourne) Key Responsibilities Support and contribute to the continuous improvement of site food safety, quality, and compliance programmes, ensuring alignment with HACCP, TACCP, VACCP, allergen management, food safety legislation, and customer requirements. Provide oversight and guidance to the Technical team responsible for the Quality Management System (QMS), including compliance, audit readiness, traceability, pest control, customer complaints, KPI reporting, and continuous improvement. Support the Specification team in maintaining accurate product specifications, artwork, technical documentation, nutritional information, and labelling in line with customer and legislative standards. Assist the Technical Manager in managing customer relationships and technical matters, acting as a key point of contact during customer visits and audits. Support and coordinate internal, customer, regulatory, and third-party audits, helping to achieve positive outcomes and timely completion of corrective actions. Promote a quality-focused culture through collaborative change management, risk assessment, data review, and continuous improvement initiatives. Work closely with Production, NPD and Supply Chain, supporting these teams in delivering products that are safe, legal, and meet quality and customer expectations. Coach, mentor, and support the Technical Services team, encouraging strong performance, engagement, and alignment What we're looking for: Key Skills & Experience A dedicated and engaged team player who is committed to supporting the team and delivering strong results. Experience working within technical or quality roles in food manufacturing, FMCG, or fresh produce environments, with the ability to positively influence and support team performance. Good working knowledge of HACCP (Level 3 minimum, Level 4 desirable), along with an understanding of TACCP, VACCP, allergen management, food safety legislation, and traceability systems. Solid understanding of BRCGS standards, retailer codes of practice, customer specifications, nutritional requirements, and food labelling legislation. Experience supporting quality management systems, audits, compliance activities, and continuous improvement initiatives within a team environment. Ability to interpret technical data, recognise potential risks and trends, and contribute to the development of effective corrective and preventative actions. Personal Attributes Comfortable working in a fast-paced, customer-focused manufacturing environment, with the flexibility to adapt to changing priorities. Resilient and able to manage a varied workload while maintaining attention to detail and a consistent approach to high standards. Friendly, approachable, and supportive, with the ability to build positive relationships and encourage team engagement. Confident communicator who can interact effectively with colleagues, customers, auditors, and senior stakeholders, with the ability to positively influence outcomes. Well organised and proactive, with the ability to manage multiple priorities and support audit and operational requirements. Competent in IT systems, including Microsoft Excel and customer portals, with the ability to use these tools to support team and business needs. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Competitive matched pension contribution Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies At your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.

Finance Manager Location: Hof - Hybrid An opportunity has arisen for a Finance Manager to join a specialist engineering and manufacturing group operating across international markets. The organisation develops and manufactures highly engineered technology products for customers worldwide and forms part of a larger global group with operations across multiple countries. This is a strategic finance leadership role with responsibility for overseeing the financial performance of three business units while supporting international group reporting requirements. The successful candidate will act as a key business partner to local leadership teams, providing financial insight, analysis and strategic guidance to support growth, profitability and operational performance. The role is ideally suited to an experienced finance professional who enjoys working closely with senior stakeholders, driving financial visibility and supporting business decision-making within an international manufacturing environment. Responsibilities of the Finance Manager (Hof - Hybrid): Take ownership of financial planning, budgeting and forecasting activities across three business units Provide strategic financial analysis and commercial insight to support business decision-making Partner with operational and senior leadership teams to drive profitability and business performance Support long-term business planning and growth strategies across the organisation Develop financial models, scenario planning and investment analysis to support strategic initiatives Monitor business performance against budgets, forecasts and key financial objectives Deliver meaningful management reporting and performance analysis for local leadership and international group management Support annual budgeting, rolling forecasts and business planning cycles Identify opportunities to improve financial performance, operational efficiency and cost control Ensure robust financial governance, controls and reporting processes are maintained across the businesses Support international group reporting requirements and provide financial information to senior stakeholders Work closely with external partners and internal teams to support business objectives and strategic projects Requirements of the Finance Manager (Hof - Hybrid): Degree-qualified in Finance, Accounting, Business or a related discipline, or equivalent professional qualification Proven experience in a Finance Manager, Commercial Finance, Financial Planning & Analysis (FP&A) or Business Partnering role Strong experience supporting manufacturing, engineering, industrial or technology-based organisations Experience managing budgets, forecasts and long-term financial planning activities Strong commercial acumen with the ability to translate financial data into actionable business insight Experience working within international organisations and multi-entity environments beneficial Strong analytical, modelling and financial planning skills Excellent stakeholder management and communication abilities Experience working with ERP systems and financial reporting tools Fluent English communication skills, both written and verbal Self-motivated and capable of operating autonomously within a fast-paced international environment Working Pattern & Benefits: Hybrid working arrangement based in Hof Flexible working hours Strategic role with significant visibility across multiple business units Opportunity to influence business performance and long-term growth strategy Exposure to international leadership teams and group-level reporting High degree of autonomy and ownership Professional development and long-term career progression opportunities within an international technology group Comprehensive employee benefits package To apply for this Finance Manager role based in Hof, please send your CV to Kishan Chandarana: (url removed) (phone number removed)

Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately 4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Here at Bow , we have a team of around 800 colleagues. We produce sandwiches, wraps, platters, sub rolls and salads for some of the biggest retailers in the UK including Sainsbury's, Co-op, Asda, Morrisons and BP Wild Bean Caf . What you'll be doing As a hygiene manager you will drive all elements of the hygiene service within a manufacturing unit by setting standards and leading the hygiene teams to deliver our customer expectations. Key accountabilities : Responsible for implementation of strategy, quality, efficiency, and hygiene innovation to ensure the manufacturing unit has a hygiene service which supports the delivery of business objectives Provide leadership and direction to the hygiene community to ensure that people are engaged, focused, and delivering their potential Establish a holistic hygiene vision incorporating the key elements of safety, health, environment, and waste management, demonstrated through great customer relations and effective management of third-party relationships and internal cross functional working Hygiene lead for coordination and successful delivery of all Manufacturing Unit visits and audits achieving recognition of excellent working practices which deliver growth and trust between all Monitor, audit and review the performance of the manufacturing unit hygiene teams to identify areas of improvement and innovation to ensure hygiene activities are delivered to plan, budget, and standards beyond compliance Delivery of projects to designated time scales and meeting all cross functional food safety and financial targets Responsible for the preparation and management of Manufacturing Unit hygiene budget, related Capex and negotiation/maintenance of third-party contracts that supply and safeguard the integrity of Manufacturing Unit standards Ensure that a safe working environment exists for colleagues and that as a minimum the department meets the standards set in the SHE Policy What we're looking for We're proud to be recognised in the Gender Equity Measure Top 100 for our commitment to gender equality. Ideally educated to degree level Holds the following qualifications in support of experience - L4 Food Hygiene, L4 HACCP, IOSH managing safely, COSHH, Allergen Awareness, CIP and Microbiological Hygiene A clear financial understanding and is experienced managing in an FMCG, ideally in hygiene management Experienced in managing and supporting auditing processes Is well versed in pest control measures Has experience working with computer programmes such as Word, Excel, and PowerPoint Has knowledge of the principles of chilled food manufacturing in high risk/low risk/low care Has experience of leading and working with a diverse workforce Has experience of integrated hygiene and environmental management systems Has experience of equipment manufacture and capital expenditure requirements These may be trained or developed. These do not all need to be in place at recruitment. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Competitive Pension Contributions Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.

Warehouse Operative High Brooms - Tunbridge Wells 13.00 - 14.00ph Monday to Thursday 8.30am-5pm and Friday 8.30am-4.30pm Temp contract until the end of September 2026 KHR are working with a bespoke manufacturer based in Tunbridge Wells that manufactures a portfolio of niche products. They are currently seeking an experienced Warehouse Operative to join them on a temporary basis until the end of September. The Warehouse Operative will be working both alone and as part of a team with accuracy, efficiency and commitment to complete the work and strive to maintain the business performance targets and individual KPIs. Responsibilities will include: - Picking & packing products - Handle 'goods in' (unloading, checking, storing, and administration) from suppliers - Daily forklift use - Ensuring that all goods that are loaded/unloaded match the relevant paperwork - Storing and rotating stock according to company procedures - Reporting any damaged or missing goods to the Warehouse Manager - Keeping the warehouse environment clean and tidy, and maintaining equipment - Following workplace health and safety rules when handling goods Candidate Profile - Experienced with a good understanding of warehouse activities in a fast-paced environment - Ideally, previous warehouse experience - Good timekeeper and able to work under pressure and deadlines - Flexible and enthusiastic approach to work - Good communication skills - Able to work quickly, accurately, and safely - Experienced with a Counterbalance Forklift KH Recruitment Ltd is acting as an Employment Business in relation to this vacancy.

Operations Manager Location: Southwest Wales Job Type: Full-time We are excited to offer an opportunity for a dynamic Operations Manager to join one of Europe's leading meat processing companies based in Southwest Wales. The Operations Manager will be responsible for leading a specific area to drive factory performance, ensuring operational effectiveness, meeting KPIs, maintaining high technical and quality standards through the development of people, processes, and systems. Day-to-Day Responsibilities: Collaborate with the Site Operations Manager to develop and implement a strategic operational plan, cascading it to production teams. Take full accountability for ensuring that production orders are completed fully, dispatched on time, and meet quality standards and customer specifications while controlling costs to deliver profits. Set and achieve site business objectives and performance targets, including operational KPIs that ensure production efficiency, quality, and yield targets are met. Conduct regular and ongoing analysis of results to identify performance shortfalls and implement corrective actions as necessary. Manage day-to-day controllable overheads, particularly in terms of labour costs, and communicate financial statuses and opportunities for savings to the Site Director. Ensure total compliance with all food safety legislation and technical requirements, focusing on HACCP principles. Manage and oversee daily and weekly communication processes to ensure all production employees are informed of targets and challenges. Drive continuous improvement in processes and practices, embracing lean manufacturing principles. Foster a client-focused culture, responding effectively to customer needs and continuously seeking improvements. Develop and maintain a leadership style that encourages engagement, empowerment, and high performance, underpinned by effective performance management and succession planning. Handle all related HR processes in conjunction with site HR support, aiming to build fair and harmonious industrial relations. Champion health and safety standards, actively promoting best practices and a safety-focused culture. Prepare for and participate in customer and government body visits, presenting the company professionally and ensuring compliance. Required Skills & Qualifications: Proven experience at management level within a fast-paced food manufacturing environment. Strong understanding of quality processes and systems, ideally holding a Food Safety Level 3 qualification. Demonstrated financial understanding and business acumen. Focused on customer and consumer needs with a thorough understanding of necessary processes and procedures. Experienced in people management practices including investigations, disciplinary and grievance procedures, performance management, and recruitment & selection processes. Knowledgeable in HSE requirements and IOSHH trained. Relevant IT literacy. Benefits: Competitive salary and benefits package. Opportunities for professional growth and development within a leading European company. Dynamic and supportive work environment. To apply for the Operations Manager position, please submit your CV and a cover letter detailing your relevant experience and why you are interested in this role.

Cost Accountant Location: East Sussex Reporting to: Finance Manager The Opportunity Recruitment South East is delighted to be supporting a well-established and growing manufacturing business in the search for a talented Cost Accountant. This is an excellent opportunity for an analytical and commercially minded finance professional who enjoys getting under the skin of the numbers. Working closely with the Finance Manager and wider operational teams, you'll play a key role in ensuring the accuracy of costing data, providing meaningful financial insight and helping to drive profitability and efficiency across the business. The successful candidate will thrive in a manufacturing environment and be confident working with large volumes of data, ERP systems and stakeholders across multiple departments. Key Responsibilities Costing & Inventory Management Carry out quarterly cost roll-ups and review Bills of Materials (BOMs). Analyse manufacturing variances, including material, labour and overhead costs. Monitor inventory valuation and reconcile inventory accounts. Coordinate and oversee stocktakes and cycle counts to ensure inventory accuracy. Investigate and resolve inventory discrepancies in a timely manner. Financial Analysis & Reporting Produce margin analysis by both product and customer. Prepare month-end journals relating to inventory and cost of sales, including: Obsolescence provisions Labour and overhead reallocations Absorption adjustments Produce daily and weekly labour efficiency reports. Complete balance sheet reconciliations. Maintain the fixed asset register and process monthly depreciation journals. Prepare monthly board reporting relating to inventory ageing and inventory segmentation. Systems & Data Management Maintain and manage costing information within the ERP system. Ensure the integrity and accuracy of cost data across financial systems. Develop and improve reporting tools, including Excel models and business intelligence dashboards. Support system upgrades, automation projects and process improvements. Drive continuous improvement and standardisation initiatives across costing processes. Compliance & Controls Ensure compliance with relevant accounting standards, including UK GAAP and IFRS. Maintain robust internal controls surrounding inventory and costing activities. Prepare year-end schedules and support external audit processes. Document procedures and ensure adherence to internal policies and best practice. General Finance Support Undertake additional accounting duties as required by the Finance Manager or Financial Controller. About You To be successful in this role, you'll have previous experience within cost or management accounting and a strong understanding of manufacturing environments. You'll also bring: Proven experience within a Cost Accountant or Management Accountant role. Strong knowledge of manufacturing operations and inventory processes. Experience using ERP systems such as Dynamics, SAP, Oracle or similar. Advanced Excel skills, including pivot tables, modelling and data analysis. Knowledge of standard costing and absorption costing methodologies. Excellent analytical and problem-solving skills. The ability to interpret data and communicate findings clearly. Strong organisational skills with the ability to work accurately to deadlines. Desirable Experience Experience using Microsoft Dynamics AX. Previous exposure to Sage Payroll and Sage HR. Knowledge of lean manufacturing principles or process improvement methodologies. Experience transitioning from accountancy practice into a manufacturing environment would be advantageous. Qualifications Professionally qualified or part-qualified (CIMA, ACA or equivalent). What's on Offer? This is a fantastic opportunity to join a successful manufacturing business where you'll have genuine visibility across the organisation and the chance to influence decision-making through meaningful financial insight. If you're someone who enjoys combining technical accounting expertise with commercial thinking and a passion for continuous improvement, we'd love to hear from you.

Business Development Manager (Succession to General Manager) Contek have formed a fantastic partnership with a client in Reading who specialise in the manufacture of high-volume and small-batch precision components for sectors including fluid power, medical, and specialist automotive. Due to continued growth, our client is seeking an ambitious and commercially driven Business Development Manager to lead sales growth and customer engagement. This role offers a clear succession plan into a General Manager position, making it an excellent opportunity for someone looking to progress into senior leadership. This is a salaried position based on a 40-hour working week and includes a company car or car allowance. Role Overview Drive business growth by developing existing customer accounts within CNC manufacturing sectors. Identify and secure new business opportunities across a range of industries, expanding into new markets. Promote the company s full manufacturing capabilities, including: Sliding head CNC machining Multi-axis milling and turning Auto-spindle machining EDM machining Build strong relationships with customers, acting as a key point of contact for technical and commercial discussions. Work closely with internal engineering and production teams to ensure customer requirements are met. Prepare quotations, proposals, and negotiate commercial terms. Develop and implement strategic sales plans aligned with company growth objectives. Provide market insight and feedback to support continuous improvement and business strategy. Person Specification Proven experience in business development or technical sales within a CNC/manufacturing environment. Strong understanding of precision engineering and machining processes. Commercially astute with the ability to identify and convert new opportunities. Confident communicator with strong relationship-building skills. Self-motivated, driven, and capable of working autonomously. Ambitious, with a desire to progress into a General Manager role. Essential Experience Minimum 8+ years experience in business development, sales, or account management within manufacturing/engineering. Experience selling or working with CNC machining services or precision components. Strong network or ability to develop business across multiple sectors. This is a fantastic opportunity to join a growing, forward-thinking business where you can make a real impact and progress into senior leadership.

Business Development Manager Location: UK-based (national remit) Type: Permanent, Full-time Package: 55,000+bonus About the Role We are seeking an experienced Business Development Manager to support growth within the Non-Destructive Testing (NDT) and inspection technology sector . This role is focused on strategic business development, account growth, and market expansion across aerospace, defence, military, and other highly regulated engineering environments. The position suits a technically credible commercial professional who can drive opportunity development, manage complex sales processes, and support long-term growth initiatives across a national territory. Key Responsibilities Business Development & Growth Identify, develop, and secure new business opportunities across NDT, aerospace, defence, and regulated industrial sectors Build and execute strategic plans to expand market share and revenue Manage complex sales cycles from opportunity identification through to contract agreement Technical & Commercial Development Support solution development through technical understanding of NDT and inspection technologies Contribute to bid development, proposals, and commercial submissions Work closely with internal engineering, service, and supplier teams to ensure solutions meet technical and commercial objectives Account & Market Management Develop and expand existing key accounts and strategic partnerships Maintain structured engagement plans to support repeat and long-term business Identify cross-selling and upselling opportunities within existing accounts Market Intelligence & Reporting Monitor competitor activity, market trends, and emerging opportunities Maintain accurate pipeline and forecasting data via CRM systems Support marketing activity including exhibitions, events, and industry engagement Skills, Experience & Attributes Essential Proven experience in B2B business development or sales management within NDT, inspection Strong understanding of consultative and solution-led sales methodologies Experience operating within aerospace, defence, military, or regulated industrial environments Commercially astute with strong negotiation and stakeholder management skills Comfortable managing long sales cycles and high-value opportunities Highly organised, self-motivated, and capable of working autonomously Full UK driving licence Desirable Background in NDT technologies (e.g. radiography, ultrasonics, UV inspection, related systems) Experience with capital equipment or technically complex solutions CRM experience (NetSuite, Salesforce, or similar) Engineering qualification (HNC/HND/Degree) or equivalent technical background WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.

Business Development Manager - Electronic Manufacturing Services (EMS) Salary: 50,000 - 55,000 + Bonus + Benefits We are looking for a results-driven Business Development Manager with a strong background in Electronic Manufacturing Services (EMS). In this role, you'll identify new opportunities, develop strategic partnerships, and expand market presence across key sectors. You will understand the full EMS lifecycle - from design and prototyping through to production and supply chain management - and know how to turn technical capability into commercial success. What You'll Bring Proven experience within EMS or electronics manufacturing A strong track record of winning new business and growing existing accounts Strong commercial awareness and relationship-building ability Confidence engaging with both technical and non-technical stakeholders Experience selling complex manufacturing or engineering solutions What You'll Do Drive new business opportunities and revenue growth Build and maintain long-term client relationships Collaborate with engineering and operations teams to deliver tailored solutions Manage the full sales cycle from lead generation through to account development Represent the business at industry events, exhibitions, and client meetings If you are commercially sharp, technically aware, and motivated by growth, we would like to hear from you. WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.

Hays Health & Safety are working with a high-hazard manufacturing business looking for a HSE Specialist with a strong grasp of process safety, to support the HSE Manager and take ownership of COMAH and DSEAR across a complex, fast-moving site. This is a hands-on role with real influence, working across engineering, operations and projects to ensure hazard risks are controlled, systems are robust, and compliance is where it needs to be. What you'll be doing Leading the site's COMAH programme and maintaining the safety management system Overseeing DSEAR compliance, risk assessments and action tracking Acting as the key contact for regulators and external bodies Supporting projects and commissioning, ensuring safety is built in from the start Tracking performance, leading audits and pushing continuous improvement What they're looking for Strong HSE background in a COMAH / major hazard environment Solid understanding of DSEAR and UK HSE legislation Experience with process safety tools (HAZOP, MoC, RCA etc.) Comfortable influencing operational teams NEBOSH qualified, with a relevant degree or similar The salary for this role is between 60,000 - 70,000 dependent on experience. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

More About The Role Our People Advisors are a knowledgeable (and busy) bunch. Managing a HR Assistant they are hands on with all things people related in site. One minute they can be dealing with an ER issue and the next they can be offering guidance and coaching to the site leadership team. It's a fast paced and varied role, but one thing remains consistent, and that's the quality of service to both our internal and external customers. Reporting to the People Manager you will also: Support, coach and challenge line management with absence, disciplinary and grievance issues Identify development opportunities to improve soft skills and build future talent Lead engaging, proactive communications across the site Build positive and effective relationships with unions and agency suppliers Reinforce the visions and values in all aspects of work and act as a barometer to colleague morale Support and drive colleague engagement on site Cover the People Specialise role in their absence Lead a number of the projects on the HR plan Design and Implement effective recruitment solutions Proactively Manage Employee Relations Support the People team with day to day admin tasks About You As well as a 'hands on' attitude and the ability to react well to change (in a fast moving environment) you will also need to have: CIPD (or working towards) or equivalent. With up to date knowledge of employment relations and employment law and how to apply this The ability to work in a fast moving HR environment, with manufacturing or logistics experience Experience of advising, supporting and coaching managers A proactive approach to continuous business improvements Experience of implementing processes with a sense of fulfilment A high level of customer service with the ability to bend and flex your communication style accordingly Good commercial awareness Experience of dealing with Unions Ability to act on own initiative and 'think outside the box' Experience of problem solving tools Project Management Skills (not required but would be ideal) In return for your hard work we will offer you: Six weeks holiday (including bank holidays) and a guaranteed day off that's important to you - whether that be a birthday, religious holiday or a special occasion 15% discount in our supermarkets and convenience stores available from the day you join us Additional 10% discount card for a Friend or Family member Career progression and development opportunities Subsidised staff canteen Competitive pension and life assurance Healthcare/Well-being benefits including Aviva Digital GP Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more Optional Payroll charity donations A range of family friendly policies including 26 weeks maternity and adoption leave along with neonatal and fertility leave About The Company You ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We re British farming s biggest single direct customer. We buy from highly valued suppliers. And we re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website.