932 jobs found

Looking for your next step in electrical engineering? Join a forward-thinking, growing organisation where your skills in testing, wiring, and assembly will make a real impact. Office based role in Milton Keynes. You'll play a key role in delivering high-quality pre-assembled panel and rail solutions, working from schematics, carrying out inspections, and ensuring every build meets exacting standards. What you'll be doing: Testing and inspecting electrical assemblies from detailed drawings Point-to-point wiring checks and mechanical build testing Producing test certificates and quality documentation Identifying faults and reporting findings Supporting assembly and wiring when required What we're looking for: Experience in electrical testing, wiring, and assembly Strong attention to detail and quality standards Ability to work methodically in a structured environment Relevant electrical qualification (HNC/C&G preferred) A proactive and reliable team player What's in it for you: Competitive salary 25+ days holiday (with increases over time) Weekly dedicated development time Pension, life assurance & wellbeing support Career progression within a growing business Recognition schemes, discounts & more If you're passionate about quality, precision, and continuous improvement, we'd love to hear from you. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.

Summary: The Graduate Civil Engineer will assist with delivering the technical civil engineering deliverables on above ground and below ground projects, working in conjunction with the Delivery Team and the Lead Civil Engineer, in accordance with the requirements set down by the Lead Civil Engineer. This role will be responsible for providing and ensuring the quality of project deliverables and will assist in the evaluation of the most efficient solutions to project problems. Main responsibilities: To achieve the efficient technical delivery of projects in the discipline. To work within a team to solve difficult problems. To assist with the preparation of technical reports, drawings, calculations including Works and Site Information documentation. To assist with the development of programmes, estimates and contract preparation. To promote the most appropriate Health and Safety Legislation with guidance and supports from the Lead Civil Engineer. Liaise with internal and external stakeholders to contribute to successful project delivery. Undertake Continued Professional Development You'll need: Skills / Qualifications / Experience Degree in Civil Engineering Ability to work as a team The ability to influence outcomes and staff who are not necessarily part of the direct function. Good organisational skills and ability to follow procedures to ensure quality is maintained. Excellent technical report writing, editorial skills, and good oral communication. It will be a bonus if you have: Skills / Qualifications / Experience Work experience within an Engineering team or similar function Employees are required to be flexible and to be prepared to perform duties and other tasks within their capabilities. The nature of our business is such that the contents of any job profile are subject to change from time to time. We want to be the water company people want to be supplied by and want to work for. We know the communities we serve are diverse. We recognise creativity comes from diversity not similarity. That's why we are enthusiastic about creating inclusion across age, race, gender, ethnicity, religion and identity. You will experience our dedication to equal opportunities and fair treatment for all: through your recruitment, employment and career progression with South East Water. Benefits package: Excellent Stakeholder pension scheme, up to 10% employer contribution. 5 weeks holiday plus bank holidays per annum, increasing to 6 weeks with length of service. Flexible annual leave policy to buy or sell holiday leave. Paid volunteering days. Cycle to work scheme. Health cash plan. Life assurance. Wellbeing related benefits. What can you expect from your recruitment? To apply for this position, please submit your CV on our career's website. It is necessary for you to have the legal right to work in the UK when you begin employment with South East Water. Additionally, as part of the employment offer, you will need to pass background, identity, and employment referencing checks. If this sounds like the opportunity you've been looking for, apply now! South East Water kindly asks that recruitment agencies refrain from submitting CVs to our employees or associates without explicit invitation from our HR Resourcing team. CVs sent on a speculative basis will not be acknowledged and will not assume any responsibility for fees or commissions in the event that we hire a candidate who applied directly or subsequently introduced by an instructed agency. Compensation package: Starting from £27,000

AV Pre-Testing Engineer Location: Luton Salary: 40,000 per annum We are seeking a proactive and technically minded AV Pre-Testing Engineer to join our client's growing technical operations team in Bedfordshire. This is an exciting opportunity for someone with a passion for audio visual technology, IT systems, and collaboration platforms who enjoys working in a structured, hands-on technical environment. This role will focus on the preparation, configuration, testing, and quality assurance of AV and unified communications equipment prior to deployment on client sites. You will play a key role in ensuring systems are fully configured, documented, and operational before installation, helping to deliver a seamless experience for both internal teams and end users. The position is primarily based at the company's in-house facility, with occasional visits to customer sites when required. Key Responsibilities Reporting to the Programming & Commissioning Manager, responsibilities will include: AV System Preparation & Pre-Testing: Configure and prepare AV and UC systems including Microsoft Teams Rooms (MTR), Zoom Rooms, and associated collaboration technologies prior to deployment. Device Configuration: Set up and configure AV hardware including cameras, microphones, DSPs, speakers, soundbars, touch panels, room controllers, and displays. Network & Firmware Setup: Apply network settings including IP addressing, device naming, firmware updates, and loading configuration files to ensure devices are deployment ready. System Testing & Quality Assurance: Carry out structured bench testing to verify system functionality, network connectivity, audio/video performance, and overall operational consistency. Documentation & Technical Records: Maintain accurate records of device configurations, IP and MAC addresses, firmware versions, and testing procedures to support commissioning and future maintenance. Technical Coordination: Work closely with installation, programming, design, and project management teams to support smooth project delivery and technical handovers. Workshop & Asset Management: Assist with maintaining an organised technical workspace, ensuring equipment is correctly labelled, stored, and prepared for dispatch. Essential Skills & Experience Good working knowledge of PC hardware, operating systems, and general IT principles. Strong interest in AV technologies, collaboration systems, and networking. Basic understanding of networking concepts including IP addressing and DHCP. Methodical approach to fault finding and technical problem solving. Good organisational skills with strong attention to detail. Ability to work independently as well as collaboratively within a team environment. Strong communication skills and professional attitude. Full UK driving licence for occasional site visits. Desirable Experience Exposure to Microsoft Teams Rooms, Zoom Rooms, or similar UC platforms. Understanding of AV-over-IP technologies and AV signal flow. Experience working within AV integration, IT support, or technical staging environments. Networking qualifications or AV certifications would be advantageous but are not essential. What's on Offer 40,000 salary and benefits package. Stakeholder pension scheme. Ongoing training and professional development opportunities. Exposure to the latest AV and collaboration technologies. Supportive team environment with genuine opportunities for career progression within the AV industry. All applicants must be eligible to work in the UK or hold a valid UK work permit. Sponsorship is not available for this role. If you are passionate about AV technology and looking to develop your career within a forward-thinking technical environment, we would love to hear from you.

Test Quality Assurance Engineer - Walsall Opportunity: Are you a Test Engineer with experience of working on medical device products? Does your experience include both software and hardware testing? Want to work for a growing medical device development company? If yes then this is the role for you. Your role as a Test Quality Assurance Engineer based in Walsall will involve designing, implementing, and performing product quality test procedures for both software and hardware on the companies medical device products. You will be responsible for understanding the product requirements and its features, designing test procedures and data to test the medical device product. You will be the last line of defense before the products are released to the market. Duties and responsibilities include: Attending meetings with the design team to understand the product details (for example: intended use, requirements, software design, and hardware design). Developing test strategies. Writing test plans and creating test cases for the products both software and hardware. Analysing opportunities and implementing automated testing. Reporting product quality issues and working with the team in resolving the issues. Ensuring all tests and procedures meet the company s Quality Management System and Regulatory standards. Preparing test reports for regulatory submission. This is a full time permanent job opportunity based in Walsall paying an excellent salary of £30,000 - £35,000 per annum and great benefits such as 23 days holidays plus bank holidays on top, Insights Bonus scheme, cycle to work scheme, Life insurance and much more. Skills: To apply for the role of Test Engineer you will have the following: Bachelor s Degree in Engineering (Computer Science, Mechanical, Electrical, or Biomedical). Experience in testing software and hardware products. Working knowledge of Medical Products Quality Management System. How to Apply: To apply for this one off opportunity, please send a word copy of your CV to me now by clicking on the Apply button or call me for a confidential chat. Please ensure you have read and agree to our Privacy Policy which can be found on the Quality Start webiste. If this sounds like the role for you or a colleague then please don t hesitate to contact us. If we manage to successfully fill a permanent placement from your recommendation then we will send you a cheque of £300. We also have many incentive schemes for referring contractors/temp staff so please contact us with the referral and we can provide you with more information. For a list of our current vacancies, please visit the Quality Start webiste. If you do not hear from Quality Start within 2 weeks your CV has not been short listed for this role. Quality Start are acting as a specialist recruitment consultancy for this role.

Why join Marshall Land Systems in this role This is a great opportunity for a Mechanical Design Engineer who wants variety, hands-on engineering exposure and the chance to develop within a strong mechanical design team. This is a Mechanical Design role, focused on the design, development, modification and support of complex physical products. You will use Autodesk Inventor for 3D CAD, detailed design and drawing production, with Windchill PLM used for product data management, configuration control, engineering change and release. At Marshall Land Systems, our mechanical design engineers do not work on the same product day after day. Our programmes are varied, technically challenging and often bespoke, meaning every project brings a different engineering problem to solve. Our teams work across a wide range of specialist land systems, including deployable infrastructure, command and control modules, medical and support facilities, protected mobility solutions, mission systems and complex vehicle-mounted equipment. The work is practical, varied and meaningful, with engineers involved across design, build, integration, production support and in-service improvement. One project may involve developing structural solutions for a welded frame, another may require packaging equipment into constrained spaces, while another may focus on supporting manufacture, resolving build issues, updating design data or contributing to bids and modifications. You will not be working on the same product every day. Each programme brings different technical challenges and gives engineers the opportunity to keep learning, solve new problems and build a broad engineering skillset. You will be part of a supportive mechanical design team, working from our modern offices in Cambridge and collaborating with colleagues across Engineering, Manufacturing, Quality, Supply Chain and Operations in the UK and Canada. For someone who wants to grow technically and see their designs become real physical products, this is a strong opportunity. This is a hybrid role, with an expectation to be onsite in Cambridge around 70% of the time. The role A Mechanical Design Engineer is required to support the design, development and delivery of robust mechanical solutions across bids and projects. The role will help provide continuity of design intent, maintain configuration control and support effective coordination across programme, manufacturing, supply chain, quality and integration stakeholders. Working as part of a wider engineering team, the role will involve developing requirements, producing and checking engineering data, creating and updating 3D models and 2D drawings, supporting configuration control and contributing to the delivery of safe, compliant and manufacturable solutions. The successful candidate will use Autodesk Inventor for 3D modelling, detailed design and drawing production, with Windchill PLM used to manage product structures, item data, configuration control, engineering change and release. The successful candidate will work closely with colleagues across Engineering and Operations in both the UK and Canada, supporting the delivery of products and systems that meet customer, regulatory, cost and schedule requirements. This is engineering you can see. Our teams work on real physical products, support them through build and integration, and often remain involved as designs mature through trials, production and in-service use. Your responsibilities will include Support the design and development of mechanical solutions across bids, projects and product modifications. Create, amend and support the checking of mechanical design outputs, including 3D models, 2D drawings, item lists, product structures and associated engineering data. Use Autodesk Inventor to develop 3D models, assemblies, drawings and practical mechanical design solutions. Use Windchill PLM to support product data management, configuration control, engineering change, item data, Bills of Material and release activity. Gain exposure to the full engineering lifecycle, from early concept and bid support through to design, build, integration and in-service updates. Support the generation and development of design requirements from stakeholder and customer needs. Contribute to the development of mechanical architectures and practical design solutions. Work to regulatory, customer and Marshall processes, ensuring engineering outputs are safe, compliant and fit for purpose. Support the preparation and checking of technical documentation, including design data, technical reports and certification evidence. Maintain product, drawing and document configuration control. Work collaboratively with Mechanical, Electrical, Manufacturing, Quality, Supply Chain and Operations teams. Support design for manufacture and assembly activities, working with production and manufacturing teams to develop practical and efficient solutions. Assist with design queries, inspection reports, technical issues and warranty-related investigations. Support technical input into bids, statements of work and project documentation where required. Identify opportunities to improve design quality, cost, manufacturability and delivery performance. Contribute to continuous improvement and challenge existing ways of working where appropriate. Develop your technical capability with support from experienced Senior and Principal Engineers. Contribute to real physical products where good engineering judgement, attention to detail and practical design make a visible difference. What makes someone successful here We are looking for engineers who enjoy solving practical problems, working with others and taking ownership of their work. The best people in our team are curious, hands-on, comfortable with detail and able to balance technical quality with programme needs. You do not need to have worked on exactly the same products before. Experience in aerospace, defence, automotive, rail, special purpose machinery, heavy engineering, structural fabrication, vehicle systems, marine, energy or other complex engineering environments could all be relevant. What matters is your ability to think clearly, work from requirements, produce robust design solutions and collaborate across functions. You will be joining a team that is technically strong, approachable and supportive. We value engineers who share knowledge, help others, challenge constructively and take pride in delivering good engineering. What we are looking for Apply if you have most of the following: Degree qualified in Engineering, Mathematics or Physics, or equivalent relevant experience. Experience in mechanical design engineering within a complex or regulated environment. Experience producing or supporting mechanical design outputs, including 3D models, 2D drawings, item lists, product structures and associated design data. Experience using Autodesk Inventor for mechanical design would be beneficial. Experience with other 3D CAD systems will also be considered. Experience using Windchill PLM for product data management, configuration control, engineering change and release would be beneficial. Experience with other PLM or PDM systems will also be considered. Understanding of mechanical design delivery, including CAD modelling, drawing production, design checking, configuration management and release. Ability to work from requirements and develop practical engineering solutions. Understanding of engineering standards, product safety and design governance. Understanding of design for manufacture, design for assembly and configuration management. Broad understanding of manufacturing methods such as sheet metal fabrication, welding, riveting and bonding. Strong problem-solving skills with a high level of attention to detail. Ability to work accurately, manage priorities and deliver to timescale. Confidence to provide sound technical input based on facts and engineering judgement. Good communication skills, with the ability to explain technical information clearly to both technical and non-technical audiences. Ability to work effectively across teams, functions and locations. Desirable experience Experience supporting products through production, build, integration or in-service support. Experience contributing to bids, technical proposals or statements of work. Experience preparing technical reports and supporting certification activities. Structural design experience would be beneficial, including understanding of structural theory and experience developing structural solutions, particularly for steel welded frames. Experience in aerospace or defence would be beneficial, but we are also interested in engineers from other complex engineering sectors such as automotive, rail, heavy engineering, special purpose machinery, structural fabrication, vehicle systems, marine, energy or industrial equipment. The benefits we offer include 27 days holiday, increasing with service up to 30 days, with the option to buy and sell leave. Pension contributions up to 9%. Private medical insurance. Extensive flexible benefits programme including Cycle to Work. Life assurance at 4x basic salary. Enhanced parental leave and pay. Paid volunteering leave. Access to industry-leading wellbeing resources and tools. . click apply for full job details

Quality Assurance Engineer 12 month contract Based in Portsmouth Offering 36ph Inside IR35 Do you have experience performing Quality Assurance activities? Do you have experience in the Defence and Aerospace industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Assurance Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Write a Quality Surveillance Plan (QSP) and continuously maintain it in accordance with project requirements Write specific instructions to define the inspection processes or checks Chair gates reviews as defined in the project and as agreed with project PA (Manufacturing Readiness Review, Integration Readiness Review, Test Readiness Review, Test Readiness Board, Delivery Review Board, Pre-Shipment Review, Shipment Readiness Review ) Create the Key Inspection Plan and support the Mandatory Inspection Plan Prepare the incoming inspection plan/checklist Review AIT work instructions for technical integrity, regarding product quality requirements including inspection, verification points, and configuration status Manage all NCRs within the defined scope in AIT using problem solving tools Confirm non-conformances and ensure robust closure using PPS techniques Support the elaboration and the efficiency of performance dialogue/SQCDP in the working area (schedule, daily work to achieve, top priorities, KPIs, achievements ) Provide reports as required by functional and project management Provide monthly report of Quality Key Performance Indicators (KPIs) Being the QA focal point for Critical Movements within the production facility Your skillset may include: HND in relevant field Experience in Quality Assurance Experience in Defence and Aerospace If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Quality Assurance Engineer 12 month contract Based in Portsmouth Offering 36ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Why join Marshall Land Systems in this role This is an excellent opportunity for a Senior Mechanical Design Engineer who wants technical ownership, programme variety and the chance to influence real engineering outcomes. This is a Mechanical Design role, focused on the design, development, modification and support of complex physical products. You will use Autodesk Inventor for 3D CAD, detailed design and drawing production, with Windchill PLM used for product data management, configuration control, engineering change and release. At Marshall Land Systems, our mechanical design engineers do not work on the same product day after day. Our programmes are varied, technically challenging and often bespoke, meaning every project brings a different engineering problem to solve. Our teams work across a wide range of specialist land systems, including deployable infrastructure, command and control modules, medical and support facilities, protected mobility solutions, mission systems and complex vehicle-mounted equipment. This role is not about repeatedly designing the same product. You will support bids, new product development, modifications, configuration control, production support, integration, trials and in-service improvements. One programme may require structural design and welded frame development, another may involve packaging systems into a constrained module, while another may focus on manufacturability, integration or customer-specific modifications. As a Senior Engineer - Mechanical Design, you will be expected to apply sound engineering judgement, guide others, make technical decisions and help maintain continuity of design intent across complex programmes. You will also support the development of less experienced engineers through technical guidance, coaching and checking. You will be joining a strong and supportive mechanical design team, working from our modern Cambridge offices and collaborating with colleagues across the UK, Canada and the Netherlands. This opportunity is a hybrid role requiring you to be onsite in Cambridge around 50-70% of the time. Job Description A Senior Engineer - Mechanical Design is required to take lead responsibility for mechanical design activities, provide continuity of design intent and configuration control, and ensure effective coordination across programme, manufacturing, supply chain, quality and integration stakeholders. The role will be to act as a senior mechanical design engineer, providing Subject Matter Expert leadership and guidance in the development of bids and delivery of projects. There will also be occasions where the successful candidate will lead specific projects or work packages. The role will require working with the current team to generate and develop requirements, define mechanical architecture, produce and check engineering data, and support technical planning. The role will also involve coaching and supporting others within the team. The successful candidate will use Autodesk Inventor for 3D modelling, detailed design and drawing production, with Windchill PLM used to manage product structures, item data, configuration control, engineering change and release. Your responsibilities will include Act as a Mechanical Design Subject Matter Expert across bids, projects and product modifications. Take technical ownership of mechanical design activities across varied programmes and product types. Produce, review and check mechanical design outputs, including 3D models, 2D drawings, item lists, product structures, design data and technical documentation. Use Autodesk Inventor to develop robust 3D models, assemblies, drawings and design solutions. Use Windchill PLM to manage product data, configuration control, engineering change, item data, Bills of Material and release activity. Support the generation of complex mechanical design architectures for new and existing product design concepts, from initial risk assessment and feasibility studies through to functional design freeze. Lead technical input into bids, modifications and project delivery activities. Generate, review and check technical documentation, including project plans, technical proposals, customer and supplier statements of work, design data and certification evidence. Apply sound systems engineering thinking to mechanical design activities. Work with stakeholder and customer requirements to derive internal design requirements. Develop mechanical approaches for modifications, upgrades and new project work. Provide technical leadership, coaching and support to mechanical design engineers and early careers engineers. Support continuity of design intent and maintain configuration control across complex programmes. Support design reviews, technical reviews and change boards. Work collaboratively with programme, manufacturing, supply chain, quality, integration and operations teams. Support the resolution of technical issues during build, integration, trials and in-service support. Help improve engineering quality, design standards, manufacturability and ways of working across the Mechanical Design function. Ensure compliance with regulatory, customer and Marshall processes. Bring significant platform, product and regulatory experience to the efficient and effective completion of engineering data sets. What makes someone successful here We are looking for engineers who enjoy solving practical problems, working with others and taking ownership of their work. The best people in our team are curious, hands-on, comfortable with detail and able to balance technical quality with programme needs. You do not need to have worked on exactly the same products before. Experience in aerospace, defence, automotive, rail, special purpose machinery, heavy engineering, structural fabrication, vehicle systems, marine, energy or other complex engineering environments could all be relevant. What matters is your ability to think clearly, work from requirements, produce robust design solutions and collaborate across functions. If you are looking for a role where every project looks the same, this probably is not it. Our programmes vary significantly in size, scope, customer need and technical challenge. That variety keeps the work interesting and gives engineers the opportunity to keep learning, solve new problems and build a broad engineering skillset. Qualifications Qualified to degree level in Engineering, Mathematics or Physics with relevant and sufficient experience in the field. Alternative qualifications and/or experience will be considered. Apply if you have most of the following Demonstrable experience working as a Senior Mechanical Design Engineer or experienced Mechanical Design Engineer within a complex engineering environment. Experience producing, reviewing or checking mechanical design data, including 3D models, 2D drawings, item lists, product structures and technical documentation. Experience using Autodesk Inventor for mechanical design would be beneficial. Experience with other 3D CAD systems will also be considered. Experience using Windchill PLM for product data management, configuration control, engineering change and release would be beneficial. Experience with other PLM or PDM systems will also be considered. Strong understanding of mechanical design delivery, including CAD modelling, drawing production, design checking, configuration management and release. Ability to apply sound systems engineering thinking to mechanical design work. In-depth understanding of industry standard design practices such as tolerance assessment, design for manufacture and assembly, configuration management and design governance. Experience working from stakeholder or customer requirements to derive practical internal design requirements. Experience developing mechanical approaches for modifications, upgrades, new designs or complex project work. Ability to compile technical reports, certification documentation and supporting design evidence. Understanding of mechanical certification and validation methods, with the ability to identify appropriate means of compliance. Experience planning and delivering complex tasks to schedule and budget. Ability to manage priorities across multiple projects or work packages. Confidence to provide sound technical input based on facts, evidence and engineering judgement. Ability to support, coach and guide less experienced engineers. Experience in aerospace or defence would be beneficial, but we are also interested in engineers from other complex or regulated engineering sectors such as automotive, rail, heavy engineering, special purpose machinery, structural fabrication, vehicle systems, marine, energy or industrial equipment. Structural design experience would be beneficial, including understanding of structural theory and experience developing structural solutions, particularly for steel welded frames. The benefits we will offer you include 27 days holiday increasing with service up to 30 days, with the option to buy or sell leave. Pension contributions up to 9%. Private medical insurance. Extensive flexible benefit programme including Cycle to Work. Life assurance at 4x basic salary. Enhanced parental leave and pay. Paid volunteering leave. Access to industry-leading wellbeing resources and tools. . click apply for full job details

Senior Buyer Required ASAP Newbury, Berkshire. Up to 50k/Annum As the Senior Buyer, you are responsible for sourcing, negotiating, and procuring materials, components, and services required for electro-mechanical manufacturing. Additionally, the role involves guiding sourcing strategy, resolving shortages, managing supplier performance, and ensuring material availability to meet production schedules. What we would like from the Senior Buyer: CIPS Level 3 or working towards accreditation 5 years' experience in procurement within electro-mechanical or defence/aerospace manufacturing Strong understanding of electronic components, machined and fabricated parts, and technical specifications Proficient in ERP/MRP systems Ability to read engineering drawings and BOMs Strong commercial negotiation and supplier-relationship skills Excellent communication and stakeholder-management capabilities across engineering and production Familiarity with ISO 9001, AS9100 or similar quality frameworks Data-driven decision-making mindset with high attention to detail What we offer the Senior Buyer: Salary up to 50,000 doe 25 days annual leave bank holidays 39-hour working week (Mon - Thurs, 7.15-8.15 till 4.15-5.15, Fri 7.15-8.15 till 12.15-1.15) Salary sacrifice-led pension plan that matches employee contributions up to 7% Free life assurance cover at the value of four times the basic annual salary Internal reward and recognition scheme linked to the internal benefits platform Employee Assistance Programme Comprehensive wellbeing programme that supports employees with their physical, mental and financial health (Medi-cash) Competitive employee discounts platform that provides employees with discounts on leading brands/retailers Cycle to Work scheme Enhanced family-friendly benefits Company sick pay If you are interested please apply online to avoid missing out on this fantastic opportunity. Further information is available on request Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

MB674: Multi-Skilled Maintenance Engineer Location: Bury St Edmunds Salary: £40,000 Working Hours: Mon to Fri 8am to 4.30pm + Overtime opportunities + 1 in 3 call out (after 3 months of employment) Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees Overview: First Military Recruitment is proudly working in partnership with a fantastic refrigeration business who are looking to recruit a Multi Skilled Maintenance Engineer to support the upkeep and maintenance of their equipment and buildings. This is a permanent position located at their depot in Bury St Edmunds. Duties and Responsibilities: Perform installation, maintenance, and repair of mechanical systems and equipment (pumps, motors etc). Conduct routine inspections and preventive maintenance tasks to ensure optimal performance and safety. Diagnose and troubleshoot mechanical issues, providing effective and timely solutions. Read and interpret technical drawings, schematics, and manuals to execute projects accurately. Collaborate with other engineers, technicians, and departments to ensure seamless project execution. Ensure compliance with relevant safety regulations, codes, and standards. Maintain accurate records of work performed, including maintenance logs and service reports. Assist in the development and implementation of process improvements to enhance efficiency and quality. Provide technical support and guidance to junior team members and apprentices. Stay updated on industry trends, best practices, and emerging technologies to continuously improve skills and knowledge Skills and Qualifications: NVQ Level 3 qualification in Mechanical Engineering or a related field. Proven experience in a mechanical engineering role, with hands-on experience in installation, maintenance, and repair. Strong understanding of mechanical systems, components, and principles. Proficiency in reading and interpreting technical drawings and schematics. Excellent problem-solving and troubleshooting skills. Strong communication and teamwork abilities. Attention to detail and a commitment to safety and quality. Ability to manage multiple tasks and priorities in a dynamic environment. MB674: Multi-Skilled Maintenance Engineer Location: Bury St Edmunds Salary: £40,000 Working Hours: Mon to Fri 8am to 4.30pm + Overtime opportunities + 1 in 3 call out (after 3 months of employment) Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees

Job Title: PPM Engineer Location: London Salary: 40k to 48k dependent on experience Job Type: Permanent, Full Time About us: At Elevate, our core values shape the work environment and define our approach to everything we do. We prioritise respect, integrity, active listening, collaboration, diversity, inclusion, quality, lifelong learning, and health and safety. By embracing these values, you will become part of a community that fosters a positive and supportive culture. About the role: As a PPM Engineer, you will be required to carry out planned preventative maintenance on all our clients' Energy Centres. You will provide accurate information and report all defects to be raised for repairs , assisting with repairs and supporting compliance tasks such as water testing to ensure the site's equipment are available at all times to ensure 99.5% uptime or greater. Ensuring all Quality Management and Compliance Documentation for Planned Preventative maintenance and reactive repair activities is accurate and complete for each site. Provide technical assistance to clients, and work colleagues within, whilst fulfilling and meeting both Quality Standards and HSE Objectives. Proactively manage HSE objectives and Quality Standards and ensure the adoption of Safe Working Practices during the works within the clients Energy Centres/Plant rooms. Make effective recommendations for continuous improvement. Ensure that Statutory and Mandatory Inspections are satisfactorily carried out and documented in line with the Company's Management System. Diligently and accurately maintain, submit relevant documentation and records as required, and maintain Company Standards. Provide a high standard of work and providing detailed reports. Support and assist your colleagues where necessary. Working to a programme of works, you will deliver the requirements of the visits and provide a detailed report. Escalating issues with any sites to ensure they are quickly resolved. Adopt HSE Policies, Procedures and Objectives, and ensure they are achieved throughout area of responsibility. Ensuring PPE equipment is safe and in date for use. Assisting the Residential and Administrative teams during busier winter periods. Ensure that all Energy Centres operate above 99.5% of the year and to carry out works and be flexible for changes to ensure that we reduce downtime to affected sites. Be versatile to support all Department works, Servicing HIUs and reacting to HIU breakdowns when needed or works outside of the contractual agreement, such as replacing radiators, HIUs, etc. Support or provide access to the Energy Centres for other contractor works. Provide quotations for parts or components required for Servicing/Repairs based on liaising with manufacturers and your team. Provide training to new employees and support their development. Any other duties consistent with the job description that may be required from time to time. About you: The ideal candidate will be well presented, wearing company uniform at all times, organised and polite. This is a client & customer-facing role, with excellent communication and customer service skills. Completed a recognised apprenticeship and/or be qualified to City & Guilds/NVQ Level 2 in Plumbing/HVAC. Experience within Energy Centres and plant rooms and working on/with their equipment. A full UK driving licence and a flexible approach to working practices is essential. You will also be required to actively take part in the callout/standby rota. You will have a proactive approach in identifying issues and making sure they are understood, reporting them effectively to management and ensuring they are being addressed and closed out. You will have prior experience on various types of Energy Centres and knowledge of District Heating networks. Good customer service skills, able to work alone or as part of a team on various projects. Hot water systems or valid unvented hot water certification. Mechanical Biased with Electrical knowledge in a similar environment, with a comprehensive understanding of current industry practices and relevant legislation (Advantageous). Non-Domestic Gas or F-Gas (Advantageous); training will be provided. Understanding the causes and effects of inefficient Energy Centres and implementing changes to improve the efficiency of the Network. Knowledge of heating systems - Direct and indirect, Energy Centre processes and supporting distribution systems. Working towards or awareness of Electrical qualifications (BS7671) allowing safe works on single or 3-phase electrics. Willingness to study for relevant industry qualifications. What we offer: Competitive salary (depending upon experience) + out of hours reactive calls allowance. Company van. Company Pension Scheme. Sickness insurance. Life Assurance. 24 days holiday plus bank holidays. After successful completion of probation: CPD opportunities, Private Health Insurance and more. Additional Information: You will also be required to actively take part in the callout/standby rota. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Planned Preventative Maintenance Engineer, Plant Room Engineer, Mechanical Maintenance Engineer, District Heating Technician, or Commercial Gas Engineer also be considered for this role.

BMS Project Manager - Hyperscale Data Centre Projects - Banbridge Your new company An opportunity has arisen for an experienced BMS Project Manager to join a well-established and fast-growing organisation operating as a Principal Contractor within the hyperscale data centre sector, delivering large-scale projects across the UK, Ireland and Europe. The business specialises in the design, manufacture and delivery of offsite prefabricated MEP and BMS solutions, with a strong and secured pipeline of data centre projects delivered under long-term framework agreements. Your new role The BMS Project Manager will be responsible for overseeing the installation, testing, commissioning and handover of Building Management Systems on hyperscale data centre projects, delivered by the business in its role as Principal Contractor. The role covers the full BMS lifecycle, primarily within offsite manufacturing and assembly facilities, ensuring systems are fully integrated, tested, compliant and ready for deployment to live data centre environments. You will also play a key role in quality management, addressing non-conformances and working closely with the Quality Manager to ensure corrective actions are implemented and closed out effectively. The role is primarily office-based with no regular travel currently required. Occasional visits to site may be necessary if issues arise, and there may be a requirement to attend site during commissioning for short periods, typically up to one week, subject to project needs. What you'll need to succeed Relevant qualification in Electrical, Building Services or Controls Engineering (NVQ Level 3 / HNC or equivalent) Strong knowledge of BMS and controls integration Experience with electrical containment, cabling and terminations Understanding of BMS commissioning processes (FAT, SAT, point-to-point testing) Familiar with HSEQ requirements, RAMS and safe systems of work Desirable Electrical installation or controls qualification 18th Edition Inspection & Testing (2391 or equivalent) HNC/HND in Building Services Engineering SSSTS or SMSTS What you'll get in return This role offers the opportunity to work on large-scale, technically complex hyperscale data centre projects, with the organisation acting as the General Contractor, rather than a specialist subcontractor. For candidates looking to strengthen their experience in data centre BMS delivery, this is a rare opportunity within the local market. Competitive salary package Full in-house training and long-term career development Employer pension scheme Life assurance Health cash plan and free annual health checks 30 days annual leave, increasing to 35 days with length of service Regular wellbeing and social initiatives Secure, free onsite parking Modern, state-of-the-art facilities Friendly, supportive and professional working environment What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

We are recruiting for an experienced Air Traffic Management (ATM) Systems Engineer to join a growing Aviation Consultancy. This role is suited to an engineer with strong experience across ATM / CNS environments and a background in safety-critical systems engineering within regulated aviation domains. You will play a key role in the development, integration and assurance of complex ATM systems supporting UK and international airspace operations. The ATM Systems Engineer will be responsible for: Applying systems engineering principles across the full lifecycle (Concept, Requirements, Design, Integration, Verification & Validation, Acceptance). Develop and manage system requirements (operational, functional and performance-based). Support system architecture definition across ATM and CNS domains. Contribute to safety assessments and regulatory compliance documentation. Support integration and testing of ATM systems within operational environments. Engage with operational stakeholders, regulators and programme teams. Produce high-quality technical documentation in line with aviation standards. Essential Experience: Proven experience within Airports, Air Traffic Management, Air Traffic Control or CNS systems. Strong understanding of ATM architectures (Surveillance, Radar, ADS-B, Voice Communications, Data Processing, Flight Data Systems). Experience working within safety-critical and regulated aviation environments. Knowledge of ICAO, EUROCONTROL, EASA or UK CAA regulatory frameworks. Systems Engineering background (INCOSE-aligned approach desirable). Ability to communicate effectively with both technical and operational stakeholders. Desirable Experience: Experience supporting Airspace Modernisation or ATM transformation programmes. Familiarity with networked ATM systems and software integration. Safety assessment experience (FHA, PSSA, SSA). Model-Based Systems Engineering (MBSE) tools.

A Structural Steel Design Co-ordinator is responsible for planning, co-ordinating and monitoring the structural steel design process from initial design information through detailing, fabrication support and site installation support. The role ensures that drawings, models, calculations and technical queries are aligned with project requirements, buildability, programme, quality standards and relevant regulations. In practice, the role acts as the link between engineers, detailers, architects, fabricators, subcontractors and site teams to help deliver safe, accurate and efficient steelwork packages. Key Responsibilities • Co-ordinate the structural steel design process across internal teams, consultants, fabricators and site personnel. • Review structural and architectural drawings, specifications and design information for completeness, accuracy and buildability. • Manage design deliverables, drawing issue schedules, requests for information and technical submittals to meet programme deadlines. • Support the development and review of connection details, steel framing layouts, member sizing information and fabrication requirements. • Ensure models and drawings are co-ordinated with other disciplines, including architectural, civil and MEP requirements. • Identify clashes, discrepancies and technical risks early, and work with the project team to resolve them efficiently. • Liaise with clients, engineers, architects, subcontractors and suppliers to clarify technical requirements and maintain design progress. • Monitor compliance with relevant design codes, project specifications, health and safety requirements and quality procedures. • Provide technical support during fabrication and erection, including responding to site queries and managing design revisions. • Contribute to value engineering, sequencing reviews and practical design solutions that improve buildability, cost and programme outcomes. Required Qualifications & Experience • Degree, HND or equivalent qualification in Civil Engineering, Structural Engineering, Construction Engineering, or a related discipline. • Relevant experience in structural steel design, steel detailing, fabrication co-ordination or construction delivery. • Good understanding of structural steelwork, connection design principles, fabrication processes and site erection requirements. • Experience working with design and detailing software such as Tekla Structures, AutoCAD and, where relevant, Revit or other BIM platforms. • Ability to read and interpret engineering drawings, general arrangement drawings, fabrication drawings and specifications. • Knowledge of relevant design standards, quality procedures and project documentation requirements. • Experience of working within multi-disciplinary construction or engineering project teams. Essential Skills • Strong technical understanding of structural steel design and detailing. • Excellent co-ordination and communication skills with both technical and non-technical stakeholders. • Good planning, organisation and time management skills. • Ability to manage multiple design issues and priorities across live projects. • Problem-solving ability with a practical and buildable approach. • Attention to detail and commitment to drawing accuracy and document control. • Competence in Microsoft Office and common project/document management systems. • Awareness of health and safety, quality assurance and design change control processes. Typical Duties and Working Relationships: On a day-to-day basis, the Structural Steel Design Co-ordinator may attend design meetings, review drawing packages, track outstanding technical queries, co-ordinate model updates, liaise with fabrication teams on practical requirements and support site teams with design clarifications. The role typically works closely with structural engineers, architects, BIM technicians, project managers, quantity surveyors, production teams and erection crews to ensure the steel package is delivered safely, accurately and on time.

We are recruiting for an experienced Air Traffic Management (ATM) Systems Engineer to join a growing Aviation Consultancy. This role is suited to an engineer with strong experience across ATM / CNS environments and a background in safety-critical systems engineering within regulated aviation domains. You will play a key role in the development, integration and assurance of complex ATM systems supporting UK and international airspace operations. The ATM Systems Engineer will be responsible for: Applying systems engineering principles across the full lifecycle (Concept, Requirements, Design, Integration, Verification & Validation, Acceptance). Develop and manage system requirements (operational, functional and performance-based). Support system architecture definition across ATM and CNS domains. Contribute to safety assessments and regulatory compliance documentation. Support integration and testing of ATM systems within operational environments. Engage with operational stakeholders, regulators and programme teams. Produce high-quality technical documentation in line with aviation standards. Essential Experience: Proven experience within Airports, Air Traffic Management, Air Traffic Control or CNS systems. Strong understanding of ATM architectures (Surveillance, Radar, ADS-B, Voice Communications, Data Processing, Flight Data Systems). Experience working within safety-critical and regulated aviation environments. Knowledge of ICAO, EUROCONTROL, EASA or UK CAA regulatory frameworks. Systems Engineering background (INCOSE-aligned approach desirable). Ability to communicate effectively with both technical and operational stakeholders. Desirable Experience: Experience supporting Airspace Modernisation or ATM transformation programmes. Familiarity with networked ATM systems and software integration. Safety assessment experience (FHA, PSSA, SSA). Model-Based Systems Engineering (MBSE) tools.

Senior Document Controller We are seeking an experienced Senior Document Controller with a proven track record in managing and maintaining document control processes. The ideal candidate will have experience in document control, be highly skilled in Electronic Document Management Systems (EDMS), and possess excellent communication and organisational abilities. Key Responsibilities: Maintain and update project documentation in compliance with company standards. Ensure accurate filing, retrieval, and distribution of documents across teams. Monitor document workflows and approvals within EDMS systems. Act as the primary point of contact for EDMS-related queries. Configure and manage document control settings in Asite and other platforms. Train and mentor new starters on document control processes and EDMS systems. Provide ongoing support to project teams on document management best practices. Ensure all documentation meets regulatory and project requirements. Conduct periodic audits to maintain data integrity and compliance. Liaise with internal teams, contractors, and clients to ensure smooth document flow. Support project managers with reporting and document status updates. Work across multiple platforms and systems to ensure consistency of data. Verify that all project information is captured and consolidated within Asite, maintaining a single source of truth for documentation. Department: Information Management Reports to: Document Control Manager Key Skills and qualifications: Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint). Ability to create formulas and macros in Microsoft Excel Ability to manage large volumes of documentation accurately and efficiently. Desirable: Experience with Power BI Excellent communication and interpersonal skills. Strong attention to detail and organisational ability. Ability to work under pressure and meet deadlines. Experience in document control within construction, engineering, or related sectors. Strong knowledge of EDMS platforms. Essential: Hands-on experience with Asite (System Admin). Desirable: Familiarity with EB and ProjectWise. Certification in Document Control or EDMS systems (advantageous). Key relationships: Operational Delivery Teams, Design, Planning, Construction, Information Management, Quality & Assurance. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a Protected Class ), or any other protected class in accordance with applicable laws.

Project Manager An established and growing technology integration business is seeking two experienced Project Managers to join its delivery team. Operating across complex infrastructure, public sector, transport, utilities, and commercial environments, the organisation delivers large-scale technology and security-focused projects throughout the UK and Ireland. Working closely with sales, service, technical, and commercial teams, you will manage multiple implementation projects from initiation through to completion, ensuring delivery against agreed quality, cost, and programme objectives. Projects will vary in scale and complexity, requiring a confident and adaptable project professional who is equally comfortable leading projects independently or contributing within larger delivery teams. Key Responsibilities Deliver projects to agreed quality, time, and budget criteria Manage multiple projects within a matrix environment Coordinate and lead project delivery teams and specialist contractors Develop and maintain project plans, schedules, and resource requirements Identify and manage project risks, issues, and opportunities Manage technical and commercial change processes Produce project and progress reports for senior stakeholders and clients Implement recovery plans where project performance deviates from targets Raise purchase requisitions for materials and subcontract resources Support pre-sales and business development activities where required Contribute to continuous improvement and lessons learned initiatives About You You will bring strong project management experience within a technical, engineering, telecoms, security, electronics, or infrastructure-related environment. You should be confident managing client relationships and coordinating delivery within fast-paced operational settings. Essential Skills & Experience Experience managing multiple client-facing projects Experience within technology, engineering, telecoms, security, or related sectors Understanding of recognised project management methodologies (PRINCE2, PMI, APM or equivalent) Knowledge of CDM regulations and health & safety compliance within project environments Commercial awareness, including exposure to NEC3/4 and/or JCT contract frameworks Strong planning, scheduling, and resource management capability Excellent communication and stakeholder management skills Proficient in Microsoft Office and Microsoft Project Positive, proactive, and solution-focused approach What s on Offer Hybrid and flexible working arrangements Health & wellbeing support programme Life assurance scheme Enhanced pension contribution Holiday carry-over allowance Recognition and long service awards Ongoing learning, development, mentoring, and career progression opportunities Interested? Please Click Apply Now! Project Manager

Job Title: Java Technical Lead Salary: Paying up to 80,000 per annum Location: Wembley London - 5 days on-site Our client, a well-established and diversified multinational organisation, is seeking a Java / DevOps Technical Lead to join their team. Skills Solid Experience in Java development with significant, demonstrable experience in Spring Boot and Microservices architecture - not just familiarity, but production ownership. Azure Integration: Proven experience building applications that consume Azure-native services, including Azure Key Vault for secrets, Azure Storage API, and Azure Service Bus for event-driven messaging. DevOps Mindset: Solid understanding of the full CI/CD lifecycle; comfortable reading and contributing to Dockerfiles and GitHub Actions YAML workflows - not as a DevOps engineer, but as a developer who understands the pipeline their code flows through. API Mastery: Deep expertise in RESTful API design principles, OAuth2 authentication flows (including FusionAuth integration), and DMARC-compliant transactional email logic via SendGrid. Duties Engineering Standards: Define and enforce the clients Java and Node.js coding standards across the team - with a specific focus on robust exception handling, ninary stream handling, structured logging via Application Insights, and adherence to security-first development practices. Cloud-Native Readiness: Ensure all application logic is optimised for containerisation from the ground up. This includes implementing proper Health Check endpoints, secure Secret Management via Azure Key Vault, correct port mapping for Container Apps, and stateless design principles compatible with Azure Container Apps (ACA). Technical Mentorship: Provide direct, hands-on mentorship to junior and mid-level developers - identifying technical debt at the codebase level, running structured code reviews, and building a culture of engineering excellence that prevents recurring quality issues such as corrupted or misconfigured deployments. Architectural Liaison: Work closely with the Principal Architect to translate High-Level Designs (HLDs) into production-ready implementation plans - ensuring the development team understands not just what to build, but why the architectural decisions were made, and what constraints must be respected. Quality Assurance: Champion a strong automated testing culture - unit tests, integration tests, and contract tests - to prevent regression and ensure deployments are verifiably stable before reaching production.

Senior Guidewire Developer. Full time, Mon - Fri 37.5 hours per week. Flexibility, bonus scheme and many more fantastic benefits! Join the Applications team driving the Guidewire Cloud rollout across Europe. You'll design, develop, and maintain legacy systems using Guidewire and other technologies, delivering high-quality solutions within a cross-functional team. This role requires strong technical and problem-solving skills, with a focus on supporting Guidewire Policy, Billing, Digital, and related apps. You'll also mentor support teams and collaborate with Business Owners, Analysts, Testers, and the Tech Lead to deliver on strategic goals. CHALLENGED NOW AND-EXPERT NEXT. Lead Technical Strategy & Architecture Provide end-to-end technical leadership on the Guidewire platform, aligning architecture with enterprise IT strategy. Advocate for scalable, maintainable solutions that minimise custom development and maximise reuse of core capabilities. Stakeholder Influence & Governance Serve as a trusted technical advisor to business and IT, guiding decisions to maintain platform integrity and align with strategy. Promote configuration over customisation to reduce technical debt and speed up delivery. Advanced Solution Design & Development Design and build high-performance Guidewire components (PolicyCentre, BillingCentre, ClaimCentre) for longevity and extensibility. Lead by example with hands-on development of key modules and integrations. Deployment Oversight & Lifecycle Management Own the deployment strategy for Guidewire features, ensuring smooth integration across environments. Monitor system health and address performance, scalability, and reliability issues proactively. Requirements Consolidation & Platform Optimisation Work with business analysts and product owners to gather requirements and design robust, platform-aligned solutions that support future needs and long-term agility. Agile Leadership & Engineering Excellence Promote Agile practices and modern engineering across teams. Mentor developers in clean code, TDD, CI/CD, and DevOps to build a high-performing delivery culture. Quality Assurance & Technical Standards Establish and enforce coding standards, design patterns, and architecture principles. Lead code reviews and audits to uphold best practices and ensure high software quality. Innovation & Continuous Improvement Keep up with Guidewire updates, industry trends, and emerging tech. Drive innovation and continuous improvement to foster a culture of technical excellence. Essential Extensive commercial software development experience Deep expertise in Guidewire InsuranceSuite v10 (ClaimCentre, PolicyCentre, BillingCentre) configuration and customisation Experience with Guidewire Cloud migration Strong understanding of general insurance and claims processes Proven integration experience with downstream systems, including finance, payment gateways, telephony, and document management Skilled in integrating third-party data feeds into cloud platforms Experience migrating data from legacy systems to Guidewire Ability to produce clear high- and low-level design documentation Experience reconciling data between Guidewire and enterprise data warehouses Strong communication skills for working with business and technical teams Comfortable engaging directly with customers and stakeholders Familiarity with full SDLC Guidewire ACE certification Experience in Agile environments (Scrum, SAFe) Flexible and adaptable in dynamic environments Languages & Technologies GOSU, Java, XML (XSD, XPath), PCF, SQL, REST and SOAP web services Tools & Platforms Bitbucket (or similar), Jenkins or TeamCity (CI/CD), Linux CLI Desirable Skills/knowledge/experience: (As applicable) Python (tooling, reconciliation scripts) Experience with internal triage and reconciliation tools Docker, Kubernetes Monitoring tools (AppDynamics, Splunk) Cloud platforms (AWS, Azure), especially Guidewire Cloud Background in Insurance or Financial Services beyond core claims/policy Experience leading or mentoring developers or contributing to solution architecture Why Join Us? We're committed to your growth, providing the support to excel in your current role whilst offering opportunities to step into new challenges and drive your career forward. We value flexibility and understand that life happens. Whether it s attending a school play or waiting for a delivery, we support a healthy balance between home and work. Our culture is built on trust, choice, and mutual respect. We re committed to fostering a diverse, equitable, and inclusive environment embracing neurodiversity and ensuring everyone has the tools and support they need to thrive. We like to think our benefits package is one of the best, focusing on colleagues health, wealth, and lifestyle. We offer: Up to 28 Days annual leave with the option to buy/sell up to 5 days holiday 10% Discretionary Annual Bonus Healix Private Medical Insurance Options 3 x Annual Salary Life Assurance Health & Wellbeing: Get money back on health expenses (optical, dental, physio), free flu jab vouchers, 24/7 virtual GP access, an employee assistance programme, and enhanced family-friendly policies including a £200 baby bonus. Financial & Lifestyle Benefits: Enjoy £250 towards driving lessons , an interest-free season ticket loan , cycle-to-work discounts, Wagestream for financial flexibility , and pension advice to support your retirement planning. Subject to company performance and completion of probation Aioi Nissay Dowa Europe is committed to promoting equal opportunities in employment. Employees and job applicants will receive equal treatment regardless of age, disability, gender reassignment, marital or civil partner status, pregnancy or maternity, race, colour, nationality, ethnic or national origin, religion or belief, sex or sexual orientation (Protected Characteristics). Reasonable adjustments: If you require any adjustments to support you during our recruitment process, please let us know. We re committed to making the process accessible and are happy to help.

Machine Tool Maintenance Technician Location: RG7 4PR , located between Reading and Basingstoke, with free onsite parking . Package: 30,000 to 40,000 (dependent on suitability and level of experience) + additional allowance Ready to play your part? At AWE, it's not just a job, it's far more than that. Our shared purpose is to help keep the nation safe. Could this role be the opportunity for you to play your part? AWE is looking for a Machine Tool Maintenance Technician to join our dynamic team. As part of AWE Production and Assets, you'll play a pivotal role in driving the performance and reliability of our cutting-edge equipment. From installation and breakdown support to maintenance, servicing, and error mapping, your work will directly impact plant efficiency and uptime. You'll collaborate closely with Machine Tool Engineering Teams, applying the Machinery Directive and relevant standards to ensure compliance and innovation go hand in hand. Who are we looking for? We do need you to have the following; A completed engineering apprenticeship with a minimum NVQ Level 2, plus equivalent hands-on Industry experience with machine tools Experience leading planned maintenance and breakdown tasks on machine tools Including machine tool mechanical systems, electrical/electronic systems, pneumatic and hydraulic systems A solid understanding of plant operations, equipment, and industrial processes Familiarity with modern maintenance practices, tools, and technologies Confidence in using fault-finding techniques to diagnose and resolve issues efficiently A working knowledge of Safe Systems of Work (SSoW) and a commitment to upholding them While this isn't a checklist, we'd love to hear from you if you have experience in any of the following areas: Knowledge of relevant legislation and standards under the Safety Management System (SMS) Using your technical know-how diagnose and resolve faults across a variety of systems Data and analysis result gathering to improve machine tool performance using a range of techniques Supporting and mentoring team members and apprentices, helping to build a strong, capable workforce Demonstrating a clear understanding of your responsibilities in relation to Environment, Health, Safety, Security, and Quality standards Knowledge of the Health and Safety at Work Act Important things you need to know: We want you to feel comfortable and able to shine during our recruitment process. Please let us know on your application form if you need any adjustments/accommodations during the process. Our interviews can take place in person or over teams and for most roles are a 1 stage process. Work hard, be rewarded: We ask a lot and set the bar high because our work truly matters. In return we offer balance, with award winning benefits including: 9-day working fortnight - meaning you get every other Friday off work, in addition to 270 hours of annual leave. Market leading contributory pension scheme (we will pay between 9% and 13% of your pensionable pay depending on your contributions). Family friendly policies: Maternity Leave - 39 Weeks Full Pay and Paternity Leave - 4 Weeks Full Pay. Opportunities for Professional Career Development including funding for annual membership of a relevant professional body. Employee Assistance Programme and Occupational Health Services. Life Assurance (4 x annual salary). Discounts - access to savings on a wide range of everyday spending. Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring. The 'Working at AWE' page on our website is where you can find full details in the 'AWE Benefits Guide'. Due to the classified nature of the work involved, there are limited opportunities to work from home in this role. It is anticipated that the successful candidate will spend the majority of their time working on site at AWE Aldermaston.

Position: Design Manager Location: Walsall with hybrid working available Salary: 75k (Neg DOE) plus bonus, car/allowance and excellent benefits package Our Client: Is one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including water, transport, built environment and energy. A broad range of civil engineering, mechanical and electrical schemes across some of the UK's largest infrastructure projects and clients They operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects with over 1,200 employees nationwide. The Role: Deliver technical solutions in response to the needs of the company's programme of work. Take responsibility for the technical compliance, quality and appropriateness of solutions delivered. Lead design consultants and multi-disciplinary engineering teams to deliver the design solutions to schedule and budget. Support the project delivery teams by providing concept, basic and detailed design solutions based on client and site-specific requirements for clean water, wastewater and biosolids treatment solutions, pipelines, trunk mains, sewers, pumping stations and networks. Ensure timely delivery of technical solutions in response to the needs of the project schedule and the company's programme of work Responsibilities: Take ownership and accountability for the technical appropriateness of the project solutions delivered throughout the project life cycle. Ensure design work is correct and complies with the customer and statutory standards, regulations, and specifications. Manage the agreed contract with external design consultants, ensuring that duties are discharged under the contract. Manage the development and delivery of appropriate, robust, reliable, operable, and maintainable asset designs that meet the project objectives. Management of multi-disciplinary teams of Engineers from within the business, consultants, and partner companies in the production of project solutions to the required level of design. Production and management of project engineering budgets and schedules for review by the head of engineering before submission to the Project Manager. Implement change control processes to track and manage the development of the Engineering element of a project to ensure all budgetary, programme and scope changes are correctly managed. Ensure that all engineering outputs provided are following Health and Safety Legislation, documented Business Processes, Quality Management Systems & best practices, e.g., checked and verified: calculations, drawings, specifications, and compliance with appropriate standards. Evaluate designs and solutions. Liaison with Engineering Managers, Project Managers and consultants concerning project issues, scope changes, risks, etc. Understanding of what encompasses Temporary Works and the supporting engineering, understanding of the types of temporary works designs available and what responsibilities the associated roles (designer/coordinator/contractor) have and engagement of internal and external temporary works designers. Experience: Essential: Design and management experience Foul water drainage system. Potable Water Mains. Wastewater treatment Building Information Modelling (BIM) and common data environments Degree/HNC qualified, or equivalent, in civil engineering Member of a recognised engineering institution, Incorporated Engineer, or Chartered Engineer and or working towards membership Excellent communication skills with the ability to liaise effectively with both clients and staff Self-driven and results-oriented with a positive outlook People management, time management, and project design management Package includes: Competitive salary Company car/green car scheme/car allowance/Van (dependent on position) Bonus (dependent on position) Company Pension Life Assurance Private Medical 25 days of annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological and financial wellbeing Flexible benefits via salary sacrifice Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression Development supported by internal and externally delivered training Continuous service awards Key Words: Design Manager Design Management Technical Manager Principal Design Engineer Conceptual Design Detailed Design Design & Build Construction Clean Water Potable Water Water Industry Water Sector Water Treatment Wastewater Sewage Pipelines Trunk Mains Water Distribution Water Supply Sewerage Water Networks Pumping Stations Foul Water Utilities Infrastructure AMP 7 AMP 8 Anglian Water Severn Trent Water Civil Engineering BIM CEng Chartered MICE